The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]




Версия для распечатки Пред. тема | След. тема
Новые ответы [ Отслеживать ]
2621XM-2621XM - плохое качество голоса, !*! Максим, 08-Фев-05, 21:04  [смотреть все]
Подскажите пожалуйста, что может быть причиной плохого качества голоса (пропадание звука , треск) при соединении выделенной линией по FR? Вот конфиги:

exit
lonmx01#sh run
Building configuration...

Current configuration : 9712 bytes
!
! Last configuration change at 18:13:54 UTC Tue Feb 8 2005 by maxim
! NVRAM config last updated at 18:46:09 UTC Thu Feb 3 2005 by maxim
!
version 12.3
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname lonmx01
!
boot-start-marker
boot system flash
boot-end-marker
!
logging buffered 10240 debugging
logging console informational
enable secret 5 $1$F3e2$jTMCdIG.AUGHJa4uTmiTo.
!
username maxim password 7 062A003149173F1C0216
username zhilivi password 7 124853464B5E55
username aemelyan password 7 051C071B245E425949
memory-size iomem 15
network-clock-participate slot 1
network-clock-select 1 E1 1/0
voice-card 1
!
aaa new-model
!
!
aaa authentication login console local
aaa session-id common
ip subnet-zero
no ip source-route
!
!
ip domain name rencap.com
ip name-server 192.168.1.50
ip name-server 10.14.0.2
!
no ip bootp server
ip multicast-routing
ip cef
ip audit notify log
ip audit po max-events 100
no ftp-server write-enable
!
!
!
isdn voice-call-failure 0
!
!
!
voice service vofr
!
!
!
!
!
!
!
!
!
!
!
controller E1 1/0
mode ccs frame-forwarding
framing NO-CRC4
channel-group 15 timeslots 16
ds0-group 0 timeslots 15 type ext-sig
ds0-group 1 timeslots 1 type ext-sig
ds0-group 2 timeslots 2 type ext-sig
ds0-group 3 timeslots 3 type ext-sig
ds0-group 4 timeslots 4 type ext-sig
ds0-group 5 timeslots 5 type ext-sig
ds0-group 6 timeslots 6 type ext-sig
ds0-group 7 timeslots 7 type ext-sig
ds0-group 8 timeslots 8 type ext-sig
ds0-group 9 timeslots 9 type ext-sig
ds0-group 10 timeslots 10 type ext-sig
ds0-group 11 timeslots 11 type ext-sig
ds0-group 12 timeslots 12 type ext-sig
ds0-group 13 timeslots 13 type ext-sig
ds0-group 14 timeslots 14 type ext-sig
ds0-group 16 timeslots 17 type ext-sig
ds0-group 17 timeslots 18 type ext-sig
ds0-group 18 timeslots 19 type ext-sig
ds0-group 19 timeslots 20 type ext-sig
ds0-group 20 timeslots 21 type ext-sig
ds0-group 21 timeslots 22 type ext-sig
ds0-group 22 timeslots 23 type ext-sig
ds0-group 23 timeslots 24 type ext-sig
ds0-group 24 timeslots 25 type ext-sig
!
!
!
interface FastEthernet0/0
ip address 192.168.1.90 255.255.255.0
speed auto
half-duplex
!
interface Serial0/0
no ip address
encapsulation frame-relay
no ip mroute-cache
frame-relay traffic-shaping
frame-relay lmi-type cisco
frame-relay ip rtp header-compression
!
interface Serial0/0.1 point-to-point
bandwidth 1984000
ip address 192.168.110.2 255.255.255.0
ip bandwidth-percent eigrp 10 10
ip pim sparse-mode
frame-relay class Tandem
frame-relay interface-dlci 100  
  vofr data 4 call-control 5
!
interface FastEthernet0/1
description VLAN112, LON_MOS_LAN (VTP LONDON)
ip address 192.168.112.1 255.255.255.0
ip pim sparse-mode
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
!
interface Serial1/0:15
no ip address
no keepalive
ccs encap frf11
ccs connect Serial0/0 100 254
no cdp enable
!
router eigrp 10
passive-interface FastEthernet0/0
network 192.168.110.0
network 192.168.112.0
neighbor 192.168.110.1 Serial0/0.1
neighbor 192.168.112.4 FastEthernet0/1
neighbor 192.168.112.2 FastEthernet0/1
neighbor 192.168.112.3 FastEthernet0/1
no auto-summary
no eigrp log-neighbor-changes
!
no ip http server
no ip http secure-server
ip classless
!
ip pim bidir-enable
ip pim rp-address 10.14.0.3 override
ip pim send-rp-announce Serial0/0.1 scope 4
ip pim send-rp-discovery Serial0/0.1 scope 5
!
!
map-class frame-relay Tandem
frame-relay cir 1984000
frame-relay bc 19840
frame-relay be 0
frame-relay mincir 1856000
frame-relay fair-queue
frame-relay interface-queue priority high
frame-relay voice bandwidth 304000
frame-relay fragment 1500
frame-relay ip rtp priority 16384 16383 48
logging trap debugging
logging source-interface FastEthernet0/1
logging 10.14.0.252
logging 10.14.0.253
logging 10.14.0.254
access-list 20 deny   224.0.1.39
access-list 20 deny   224.0.1.40
access-list 20 permit 227.1.1.1
access-list 20 permit 224.0.0.0 15.255.255.255
access-list 30 deny   227.1.1.1
access-list 30 permit any
dialer-list 1 protocol ip permit
dialer-list 1 protocol ipx permit
!
!
snmp-server community 7oaks RW 30
snmp-server enable traps snmp authentication linkdown linkup coldstart
snmp-server enable traps tty
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps ipmulticast
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps frame-relay subif
snmp-server enable traps syslog
!
voice-port 1/0:0
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1000
!
voice-port 1/0:1
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1001
!
voice-port 1/0:2
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1002
!
voice-port 1/0:3
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1003
!
voice-port 1/0:4
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1004
!
voice-port 1/0:5
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1005
!
voice-port 1/0:6
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1006
!
voice-port 1/0:7
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1007
!
voice-port 1/0:8
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1008
!
voice-port 1/0:9
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1009
!
voice-port 1/0:10
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1010
!
voice-port 1/0:11
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1011
!
voice-port 1/0:12
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1012
!
voice-port 1/0:13
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1013
!
voice-port 1/0:14
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1014
!
voice-port 1/0:16
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1016
!
voice-port 1/0:17
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1017
!
voice-port 1/0:18
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1018
!
voice-port 1/0:19
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1019
!
voice-port 1/0:20
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1020
!
voice-port 1/0:21
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1021
!
voice-port 1/0:22
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1022
!
voice-port 1/0:23
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1023
!
voice-port 1/0:24
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 1024
!
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 2000 pots
destination-pattern 2000
port 1/0:0
!
dial-peer voice 2001 pots
destination-pattern 2001
port 1/0:1
!
dial-peer voice 2002 pots
destination-pattern 2002
port 1/0:2
!
dial-peer voice 2003 pots
destination-pattern 2003
port 1/0:3
!
dial-peer voice 2004 pots
destination-pattern 2004
port 1/0:4
!
dial-peer voice 2005 pots
destination-pattern 2005
port 1/0:5
!
dial-peer voice 2006 pots
destination-pattern 2006
port 1/0:6
!
dial-peer voice 2007 pots
destination-pattern 2007
port 1/0:7
!
dial-peer voice 2008 pots
destination-pattern 2008
port 1/0:8
!
dial-peer voice 2009 pots
destination-pattern 2009
port 1/0:9
!
dial-peer voice 2010 pots
destination-pattern 2010
port 1/0:10
!
dial-peer voice 2011 pots
destination-pattern 2011
port 1/0:11
!
dial-peer voice 2012 pots
destination-pattern 2012
port 1/0:12
!
dial-peer voice 2013 pots
destination-pattern 2013
port 1/0:13
!
dial-peer voice 2014 pots
destination-pattern 2014
port 1/0:14
!
dial-peer voice 2016 pots
destination-pattern 2016
port 1/0:16
!
dial-peer voice 2017 pots
destination-pattern 2017
port 1/0:17
!
dial-peer voice 2018 pots
destination-pattern 2018
port 1/0:18
!
dial-peer voice 2019 pots
destination-pattern 2019
port 1/0:19
!
dial-peer voice 2020 pots
destination-pattern 2020
port 1/0:20
!
dial-peer voice 2021 pots
destination-pattern 2021
port 1/0:21
!
dial-peer voice 2022 pots
destination-pattern 2022
port 1/0:22
!
dial-peer voice 2023 pots
destination-pattern 2023
port 1/0:23
!
dial-peer voice 2024 pots
destination-pattern 2024
port 1/0:24
!
dial-peer voice 1000 vofr
destination-pattern 1...
session target Serial0/0 100
!
!
banner login ^CCC
The use of this device is restricted to authorized users for business
purposes only. Any unauthorized access or attempted access is a  
criminal violation of the law. The use of this system constitutes
consent to security testing and monitoring.


Users must comply with internal data security guidelines.
^C
!
line con 0
session-timeout 2000
exec-timeout 2000 0
login authentication console
line aux 0
session-timeout 2000
exec-timeout 2000 0
login authentication console
modem InOut
transport input telnet
transport output telnet
escape-character BREAK
telnet transparent
stopbits 1
flowcontrol hardware
line vty 0 4
session-timeout 2000
exec-timeout 2000 0
login authentication console
transport input all
line vty 5 15
session-timeout 2000
exec-timeout 2000 0
login authentication console
transport input all
!
ntp clock-period 17180871
ntp server 10.14.0.4
!
!
end

lonmx01# exit

[Connection to lonmx01 closed by foreign host]
M4USB01#sh run
Building configuration...

Current configuration : 10161 bytes
!
! Last configuration change at 17:44:20 UTC Tue Feb 8 2005 by aemelyan
! NVRAM config last updated at 18:36:35 UTC Thu Feb 3 2005 by aemelyan
!
version 12.3
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname M4USB01
!
boot-start-marker
boot-end-marker
!
logging buffered 10240 debugging
no logging console
enable secret 5 $1$nM6S$ocl5FBBMzG/vN/xmJQp4G1
!
username maxim password 7 143B1D1B095D1C2E2329
username aemelyan password 7 00131212014907565F
username zhilivi password 7 091D185840504E
memory-size iomem 15
network-clock-participate slot 1
network-clock-select 1 E1 1/0
voice-card 1
!
aaa new-model
!
!
aaa authentication login console local
aaa session-id common
ip subnet-zero
no ip source-route
!
!
ip domain name rencap.com
ip name-server 10.14.0.2
!
no ip bootp server
ip multicast-routing
ip cef
ip audit notify log
ip audit po max-events 100
frame-relay switching
no ftp-server write-enable
!
!
!
isdn voice-call-failure 0
!
!
!
!
!
!
!
!
!
!
!
!
!
controller E1 1/0
mode ccs frame-forwarding
framing NO-CRC4
channel-group 15 timeslots 16
ds0-group 0 timeslots 15 type ext-sig
ds0-group 1 timeslots 1 type ext-sig
ds0-group 2 timeslots 2 type ext-sig
ds0-group 3 timeslots 3 type ext-sig
ds0-group 4 timeslots 4 type ext-sig
ds0-group 5 timeslots 5 type ext-sig
ds0-group 6 timeslots 6 type ext-sig
ds0-group 7 timeslots 7 type ext-sig
ds0-group 8 timeslots 8 type ext-sig
ds0-group 9 timeslots 9 type ext-sig
ds0-group 10 timeslots 10 type ext-sig
ds0-group 11 timeslots 11 type ext-sig
ds0-group 12 timeslots 12 type ext-sig
ds0-group 13 timeslots 13 type ext-sig
ds0-group 14 timeslots 14 type ext-sig
ds0-group 16 timeslots 17 type ext-sig
ds0-group 17 timeslots 18 type ext-sig
ds0-group 18 timeslots 19 type ext-sig
ds0-group 19 timeslots 20 type ext-sig
ds0-group 20 timeslots 21 type ext-sig
ds0-group 21 timeslots 22 type ext-sig
ds0-group 22 timeslots 23 type ext-sig
ds0-group 23 timeslots 24 type ext-sig
ds0-group 24 timeslots 25 type ext-sig
!
!
!
interface FastEthernet0/0
description VLAN111, MOS_LON_LAN (VTP USADBA)
ip address 192.168.111.1 255.255.255.0
ip directed-broadcast
ip pim sparse-mode
speed 100
full-duplex
hold-queue 32 in
hold-queue 100 out
!
interface Serial0/0
no ip address
ip accounting output-packets
encapsulation frame-relay
no ip mroute-cache
frame-relay traffic-shaping
frame-relay lmi-type cisco
frame-relay ip rtp header-compression
frame-relay intf-type dce
!
interface Serial0/0.1 point-to-point
bandwidth 1984000
ip address 192.168.110.1 255.255.255.0
ip accounting output-packets
ip bandwidth-percent eigrp 10 10
ip pim sparse-mode
ip multicast rate-limit out group-list 40 512
frame-relay class Tandem
frame-relay interface-dlci 100  
  vofr data 4 call-control 5
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
hold-queue 32 in
hold-queue 100 out
!
interface Serial0/1
no ip address
shutdown
!
interface Serial1/0:15
no ip address
no keepalive
ccs encap frf11
ccs connect Serial0/0 100 254
no cdp enable
!
router eigrp 10
network 192.168.110.0
network 192.168.111.0
neighbor 192.168.111.2 FastEthernet0/0
neighbor 192.168.111.3 FastEthernet0/0
neighbor 192.168.110.2 Serial0/0.1
no auto-summary
no eigrp log-neighbor-changes
!
no ip http server
no ip http secure-server
ip classless
ip route 192.168.30.0 255.255.255.0 192.168.100.6
ip route 192.168.31.0 255.255.255.0 192.168.100.6
!
ip pim rp-address 10.14.0.3 override
ip pim send-rp-discovery FastEthernet0/0 scope 2
!
!
map-class frame-relay Tandem
frame-relay cir 1984000
frame-relay bc 19840
frame-relay be 0
frame-relay mincir 1856000
frame-relay fair-queue
frame-relay interface-queue priority high
frame-relay voice bandwidth 304000
frame-relay fragment 1500
frame-relay ip rtp priority 16384 16383 48
logging trap debugging
logging source-interface FastEthernet0/0
logging 10.14.0.252
logging 10.14.0.253
logging 10.14.0.254
access-list 20 deny   227.1.1.1
access-list 20 deny   227.1.1.10
access-list 20 permit any
access-list 40 permit 227.1.1.1
access-list 40 permit 227.1.1.10
access-list 40 deny   any
access-list 50 permit 227.1.10.20
access-list 50 deny   any
!
!
snmp-server community 7oaks RW 30
snmp-server enable traps snmp authentication linkdown linkup coldstart
snmp-server enable traps tty
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps ipmulticast
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps frame-relay subif
snmp-server enable traps syslog
snmp-server enable traps rtr
snmp-server enable traps dlsw
snmp-server enable traps dial
snmp-server enable traps voice poor-qov
snmp-server host 10.14.0.254 7oaks
!
voice-port 1/0:0
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2000 answer-mode
!
voice-port 1/0:1
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2001 answer-mode
!
voice-port 1/0:2
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2002 answer-mode
!
voice-port 1/0:3
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2003 answer-mode
!
voice-port 1/0:4
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2004 answer-mode
!
voice-port 1/0:5
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2005 answer-mode
!
voice-port 1/0:6
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2006 answer-mode
!
voice-port 1/0:7
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2007 answer-mode
!
voice-port 1/0:8
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2008 answer-mode
!
voice-port 1/0:9
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2009 answer-mode
!
voice-port 1/0:10
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2010 answer-mode
!
voice-port 1/0:11
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2011 answer-mode
!
voice-port 1/0:12
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2012 answer-mode
!
voice-port 1/0:13
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2013 answer-mode
!
voice-port 1/0:14
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2014 answer-mode
!
voice-port 1/0:16
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2016 answer-mode
!
voice-port 1/0:17
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2017 answer-mode
!
voice-port 1/0:18
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2018 answer-mode
!
voice-port 1/0:19
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2019 answer-mode
!
voice-port 1/0:20
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2020 answer-mode
!
voice-port 1/0:21
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2021 answer-mode
!
voice-port 1/0:22
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2022 answer-mode
!
voice-port 1/0:23
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2023 answer-mode
!
voice-port 1/0:24
timeouts call-disconnect 3
timeouts wait-release 3
connection trunk 2024 answer-mode
!
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 1000 pots
destination-pattern 1000
port 1/0:0
!
dial-peer voice 1001 pots
destination-pattern 1001
port 1/0:1
!
dial-peer voice 1002 pots
destination-pattern 1002
port 1/0:2
!
dial-peer voice 1003 pots
destination-pattern 1003
port 1/0:3
!
dial-peer voice 1004 pots
destination-pattern 1004
port 1/0:4
!
dial-peer voice 1005 pots
destination-pattern 1005
port 1/0:5
!
dial-peer voice 1006 pots
destination-pattern 1006
port 1/0:6
!
dial-peer voice 1007 pots
destination-pattern 1007
port 1/0:7
!
dial-peer voice 1008 pots
destination-pattern 1008
port 1/0:8
!
dial-peer voice 1009 pots
destination-pattern 1009
port 1/0:9
!
dial-peer voice 1010 pots
destination-pattern 1010
port 1/0:10
!
dial-peer voice 1011 pots
destination-pattern 1011
port 1/0:11
!
dial-peer voice 1012 pots
destination-pattern 1012
port 1/0:12
!
dial-peer voice 1013 pots
destination-pattern 1013
port 1/0:13
!
dial-peer voice 1014 pots
destination-pattern 1014
port 1/0:14
!
dial-peer voice 1016 pots
destination-pattern 1016
port 1/0:16
!
dial-peer voice 1017 pots
destination-pattern 1017
port 1/0:17
!
dial-peer voice 1018 pots
destination-pattern 1018
port 1/0:18
!
dial-peer voice 1019 pots
destination-pattern 1019
port 1/0:19
!
dial-peer voice 1020 pots
destination-pattern 1020
port 1/0:20
!
dial-peer voice 1021 pots
destination-pattern 1021
port 1/0:21
!
dial-peer voice 1022 pots
destination-pattern 1022
port 1/0:22
!
dial-peer voice 1023 pots
destination-pattern 1023
port 1/0:23
!
dial-peer voice 1024 pots
destination-pattern 1024
port 1/0:24
!
dial-peer voice 2000 vofr
destination-pattern 2...
session target Serial0/0 100
!
!
banner login ^CCC
The use of this device is restricted to authorized users for business
purposes only. Any unauthorized access or attempted access is a  
criminal violation of the law. The use of this system constitutes
consent to security testing and monitoring.


Users must comply with internal data security guidelines.
^C
!
line con 0
session-timeout 2000
exec-timeout 2000 0
login authentication console
line aux 0
login authentication console
transport input telnet
transport output telnet
escape-character BREAK
telnet transparent
stopbits 1
flowcontrol hardware
line vty 0 4
exec-timeout 60 0
login authentication console
transport input all
line vty 5 15
exec-timeout 60 0
login authentication console
transport input all
!
ntp clock-period 17179559
ntp server 10.14.0.4
!
!
end

M4USB01#

  • 2621XM-2621XM - плохое качество голоса, !*! Сайко, 08:59 , 09-Фев-05 (1)
    Поражает вот это
    frame-relay fragment 1500
    если у Вас действительно 2мбита то никакой фрагментации не надо.
    Настройте CBWFQ/LLQ.
  • 2621XM-2621XM - плохое качество голоса, !*! vitex, 11:51 , 09-Фев-05 (2)
    >Подскажите пожалуйста, что может быть причиной плохого качества голоса (пропадание звука ,
    >треск) при соединении выделенной линией по FR? Вот конфиги:
    При использовании модулей NM-HDV иногда что-то случается с DSP, при этом слышен хрип и треск в линии. Лечится ребутом. Причем то-же самое происходит и при использовании модулей NM-30DM для dial-up - в обоих модулях используются одни и те же DSP.
    AS53xx этого недостатка лишена.
    • 2621XM-2621XM - плохое качество голоса, !*! onorua, 19:47 , 10-Фев-05 (3)
      >>Подскажите пожалуйста, что может быть причиной плохого качества голоса (пропадание звука ,
      >>треск) при соединении выделенной линией по FR? Вот конфиги:
      >При использовании модулей NM-HDV иногда что-то случается с DSP, при этом слышен
      >хрип и треск в линии. Лечится ребутом. Причем то-же самое происходит
      >и при использовании модулей NM-30DM для dial-up - в обоих модулях
      >используются одни и те же DSP.
      >AS53xx этого недостатка лишена.

      а что говорит sh process cpu? У нас такая фигня была, когда железка очень нагружена.

    • 2621XM-2621XM - плохое качество голоса, !*! Максим, 16:19 , 21-Фев-05 (9)
      Перегружать циску попробую сегодня вечером, правда дефект плавающий то есть помехи то нет - не знаю поможет или нет. По поводу перенастройки очередей - у нас 1984000 килобита, 31 таймслот вместо 32, имеет ли это значение? А как настроить при таком конфиге другие типы очередности пакетов я совсем не представляю - нельзя ли кусочек конфига или ссылку?

  • 2621XM-2621XM - плохое качество голоса, !*! dct, 20:59 , 10-Фев-05 (4)

    И в общемто не хотелось бы кого учить....
    но лучше взять за правило, свои пароли даже под шифром на публику не ложить... как впрочем и некоторые части конфигов..
    ;)

    • 2621XM-2621XM - плохое качество голоса, !*! Simps, 15:42 , 11-Фев-05 (5)
      >
      >И в общемто не хотелось бы кого учить....
      >но лучше взять за правило, свои пароли даже под шифром на публику
      >не ложить... как впрочем и некоторые части конфигов..
      >;)

      А что тебя смутило? Или ты смотрел только пароли а на сетевые настройки не глянул?

  • 2621XM-2621XM - плохое качество голоса, !*! ВОЛКА, 23:21 , 11-Фев-05 (6)
    думаю, что полосы вам не хватает....
    sh int s0/0
    что показывает, кода треск наблюдается...

    вы e1 поток прозрачно прокидываете, почему не хотите его терминировать?

    • 2621XM-2621XM - плохое качество голоса, !*! Максим, 16:09 , 21-Фев-05 (7)
      Всем большое спасибо за ответы!! Да, иногда бывает, что в момент помех - процессор сильно нагружен ( до 90 процентов судя по sh proc cpu his) но не всегда, примерно 2 раза из 3. Терминировать - не очень хорошо для нас у нас стоят 2 меридиана, которые связаны их специальной сигнализацией MCDN - нужно чтобы все ее сообщения ходили. Пока без улучшений и чтьо обидно совсем без идей... ИОС меняли, помогло но не кардинально.
      • 2621XM-2621XM - плохое качество голоса, !*! Максим, 16:15 , 21-Фев-05 (8)
        Перегружать попробуем сегодня вечером, но дефект плавающий, то есть помехи то нет - может помогет..  по поводу фрагментации - у нас 1984000 килобита, 31 тайм слот вместо 32 - имеет ли это значение? А вот как настроить до=ругие очереди при таком конфиге я не очень представляю, можно кусок конфига или ссылку?

    • 2621XM-2621XM - плохое качество голоса, !*! mtchizhov, 16:24 , 21-Фев-05 (10)
      Перегружать циску попробую сегодня вечером, правда дефект плавающий то есть помехи то нет - не знаю поможет или нет. По поводу перенастройки очередей - у нас 1984000 килобита, 31 таймслот вместо 32, имеет ли это значение? А как настроить при таком конфиге другие типы очередности пакетов я совсем не представляю - нельзя ли кусочек конфига или ссылку?

    • 2621XM-2621XM - плохое качество голоса, !*! mtchizhov, 16:33 , 21-Фев-05 (11)
      вот интерфейсы с обеих сторон в один и тот же момент времени:

      Serial0/0 is up, line protocol is up
        Hardware is PowerQUICC Serial
        MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
           reliability 255/255, txload 24/255, rxload 1/255
        Encapsulation FRAME-RELAY, loopback not set
        Keepalive set (10 sec)
        LMI enq sent  84319, LMI stat recvd 84319, LMI upd recvd 0, DTE LMI up
        LMI enq recvd 0, LMI stat sent  0, LMI upd sent  0
        LMI DLCI 1023  LMI type is CISCO  frame relay DTE
        Broadcast queue 0/64, broadcasts sent/dropped 328804/0, interface broadcasts 589634
        Last input 00:00:00, output 00:00:00, output hang never
        Last clearing of "show interface" counters 1w2d
        Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 12338621
        Queueing strategy: dual fifo
        Output queue: high size/max/dropped 0/256/0
        Output queue: 0/128 (size/max)
        5 minute input rate 4000 bits/sec, 6 packets/sec
        5 minute output rate 146000 bits/sec, 71 packets/sec
           19818743 packets input, 3111296151 bytes, 0 no buffer
           Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
           0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
           28702441 packets output, 2344327755 bytes, 0 underruns
           0 output errors, 0 collisions, 2 interface resets
           0 output buffer failures, 0 output buffers swapped out
           0 carrier transitions
           DCD=up  DSR=up  DTR=up  RTS=up  CTS=up                    

      Serial0/0 is up, line protocol is up
        Hardware is PowerQUICC Serial
        MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
           reliability 255/255, txload 1/255, rxload 19/255
        Encapsulation FRAME-RELAY, loopback not set
        Keepalive set (10 sec)
        LMI enq sent  84259, LMI stat recvd 84258, LMI upd recvd 0, DTE LMI up
        LMI enq recvd 0, LMI stat sent  0, LMI upd sent  0
        LMI DLCI 1023  LMI type is CISCO  frame relay DTE
        Broadcast queue 0/64, broadcasts sent/dropped 343974/0, interface broadcasts 374765
        Last input 00:00:00, output 00:00:00, output hang never
        Last clearing of "show interface" counters 1w2d
        Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 2975
        Queueing strategy: dual fifo
        Output queue: high size/max/dropped 0/256/0
        Output queue: 0/128 (size/max)
        5 minute input rate 121000 bits/sec, 269 packets/sec
        5 minute output rate 4000 bits/sec, 6 packets/sec
           50259759 packets input, 2387762966 bytes, 0 no buffer
           Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
           0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
           17202720 packets output, 3104053678 bytes, 0 underruns
           0 output errors, 0 collisions, 2 interface resets
           0 output buffer failures, 0 output buffers swapped out
           0 carrier transitions
           DCD=up  DSR=up  DTR=up  RTS=up  CTS=up              





Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру