8 Файлы

Вот три файла, которые вам нужны кроме тех конфигурационных, что уже показаны выше.

Это скрипт stage_1.sh, который вы не должны модифицировать.

#!/bin/sh
#
# stage_1.sh - FreeBSD From Scratch, Stage 1: System Installation.
#              Usage: ./stage_1.sh profile
#              will read ./stage_1.conf.profile
#              and write ./stage_1.log.profile
#
# Author:      Jens Schweikhardt
# $Id: stage_1.sh,v 1.7 2004/01/03 13:50:41 toor Exp toor $
# $FreeBSD: doc/en_US.ISO8859-1/articles/fbsd-from-scratch/stage_1.sh,v 1.4 2004/01/21 19:39:26 schweikh Exp $

PATH=/bin:/usr/bin:/sbin:/usr/sbin

# Prerequisites:
#
# a) Successfully completed "make buildworld" and "make buildkernel"
# b) Unused partitions (at least one for the root fs, probably more for
#    the new /usr and /var, to your liking.)
# c) A customized stage_1.conf.profile file.

if test $# -ne 1; then
  echo "usage: stage_1.sh profile" 1>&2
  exit 1
fi

# ---------------------------------------------------------------------------- #
# Step 1: Create an empty directory tree below $DESTDIR.
# ---------------------------------------------------------------------------- #

step_one () {
  create_file_systems
  # Now create all the other directories. Mandatory.
  cd ${SRC}/etc; make distrib-dirs DESTDIR=${DESTDIR}
}

# ---------------------------------------------------------------------------- #
# Step 2: Fill the empty /etc directory tree and put a few files in /.
# ---------------------------------------------------------------------------- #

step_two () {
  copy_files

  # Delete mergemaster's temproot, if any.
  TEMPROOT=/var/tmp/temproot.stage1
  if test -d ${TEMPROOT}; then
    chflags -R 0 ${TEMPROOT}
    rm -rf ${TEMPROOT}
  fi
  export MAKEDEVPATH="/bin:/sbin:/usr/bin"
  mergemaster -i -m ${SRC}/etc -t ${TEMPROOT} -D ${DESTDIR}
  cap_mkdb ${DESTDIR}/etc/login.conf
  pwd_mkdb -d ${DESTDIR}/etc -p ${DESTDIR}/etc/master.passwd

  # Mergemaster does not create empty files, e.g. in /var/log. Do so now,
  # but do not clobber files that may have been copied with copy_files.
  cd ${TEMPROOT}
  find . -type f | sed 's,^\./,,' |
  while read f; do
    if test -r ${DESTDIR}/${f}; then
      echo "${DESTDIR}/${f} already exists; not copied"
    else
      echo "Creating empty ${DESTDIR}/${f}"
      cp -p ${f} ${DESTDIR}/${f}
    fi
  done
  chflags -R 0 ${TEMPROOT}
  rm -rf ${TEMPROOT}
}

# ---------------------------------------------------------------------------- #
# Step 3: Install world.
# ---------------------------------------------------------------------------- #

step_three () {
  cd ${SRC}
  make installworld DESTDIR=${DESTDIR}
  # Install additional compatibility libraries (optional). Use this if you
  # have programs dynamically linked against libc.so.4, i.e. if you see
  # /usr/libexec/ld-elf.so.1: Shared object "libc.so.4" not found
  cd lib/compat/compat4x.i386
  make all install DESTDIR=${DESTDIR}
}

# ---------------------------------------------------------------------------- #
# Step 4: Install kernel and modules.
# ---------------------------------------------------------------------------- #

step_four () {
  cd ${SRC}
  # The loader.conf and device.hints are required by the installkernel target.
  # If you have not copied them in Step 2, cp them as shown in the next 2 lines.
  #   cp sys/boot/forth/loader.conf ${DESTDIR}/boot/defaults
  #   cp sys/i386/conf/GENERIC.hints ${DESTDIR}/boot/device.hints
  make installkernel DESTDIR=${DESTDIR} KERNCONF=${KERNCONF}
}

# ---------------------------------------------------------------------------- #
# Step 5: Install /etc/fstab and time zone info.
# ---------------------------------------------------------------------------- #

step_five () {
  create_etc_fstab

  # Setup time zone info; pretty much mandatory.
  cp ${DESTDIR}/usr/share/zoneinfo/${TIMEZONE} ${DESTDIR}/etc/localtime
  if test -r /etc/wall_cmos_clock; then
     cp -p /etc/wall_cmos_clock ${DESTDIR}/etc/wall_cmos_clock
  fi
}

# ---------------------------------------------------------------------------- #
# Step 6: All remaining customization.
# ---------------------------------------------------------------------------- #

step_six () {
  all_remaining_customization
}

do_steps () {
  echo "PROFILE=${PROFILE}"
  echo "DESTDIR=${DESTDIR}"
  echo "SRC=${SRC}"
  echo "KERNCONF=${KERNCONF}"
  echo "TIMEZONE=${TIMEZONE}"
  echo "TYPE=${TYPE}"
  echo "REVISION=${REVISION}"
  echo "BRANCH=${BRANCH}"
  echo "RELDATE=${RELDATE}"
  step_one
  step_two
  step_three
  step_four
  step_five
  step_six
}

# ---------------------------------------------------------------------------- #
# The ball starts rolling here.
# ---------------------------------------------------------------------------- #

PROFILE="$1"
set -x -e -u # Stop for any error or use of an undefined variable.
. ./stage_1.conf.${PROFILE}

# Determine a few variables from the sources that were used to make the
# world. The variables can be used to modify actions, e.g. depending on
# whether we install a 4.x or 5.x system. The __FreeBSD_version numbers
# for RELDATE are documented in the Porter's Handbook,
# doc/en_US.ISO8859-1/books/porters-handbook/freebsd-versions.html.
# Scheme is:  <major><two digit minor><0 if release branch, otherwise 1>xx
# The result will be something like
#
#   TYPE="FreeBSD"
#   REVISION="4.9"
#   BRANCH="RC"      { "CURRENT", "STABLE", "RELEASE" }
#   RELDATE="502101"
#
eval $(awk '/^(TYPE|REVISION|BRANCH)=/' ${SRC}/sys/conf/newvers.sh)
RELDATE=$(awk '/^[ \t]*#[ \t]*define[ \t][ \t]*__FreeBSD_version[ \t]/ {
                print $3
              }' ${SRC}/sys/sys/param.h)

echo "=> Logging to stage_1.log.${PROFILE}"
do_steps 2>&1 | tee stage_1.log.${PROFILE}

# vim: tabstop=2:expandtab:shiftwidth=2:
# EOF $RCSfile: stage_1.sh,v $

Сгрузите stage_1.sh.

Это скрипт stage_2.sh. Вам может понадобиться изменить переменные в самом начале файла.

#!/bin/sh
#
# stage_2.sh - FreeBSD From Scratch, Stage 2: Ports Installation.
#              Usage: ./stage_2.sh [-hnp] configname
#
# Author:      Jens Schweikhardt
# $Id: stage_2.sh,v 1.5 2004/01/23 22:09:19 toor Exp toor $
# $FreeBSD: doc/en_US.ISO8859-1/articles/fbsd-from-scratch/stage_2.sh,v 1.4 2004/01/23 22:11:41 schweikh Exp $

DBDIR="/var/db/pkg"
PORTS="/usr/ports"
: ${PACKAGES:=${PORTS}/packages}
LOGDIR="/home/root/setup/ports.log"; mkdir -p ${LOGDIR}
PKG_PATH="/cdrom/packages/All:/dvd/packages/All"
PKG=

MYNAME="$(basename $0)"
usage () {
    exec >&2
    echo "usage: ${MYNAME} [-hnp] configname"
    echo ""
    echo "  Options:"
    echo "  -h    Print this help text."
    echo "  -n    Dryrun: just show what would be done."
    echo "  -p    Install a precompiled package if one can be found."
    echo ""
    echo "  The config file (stage_2.conf.configname) is a list of"
    echo "  ports to install with one entry per line. Each line"
    echo "  consists of two or three space separated fields:"
    echo "  category, port, and optionally a build command."
    echo ""
    exit 1
}

# Look for a package in these locations in sequence.
# Returns as soon as the first is found. Result on stdout.
#
#   ${PORTS}/${CATEGORY}/${NAME}
#   ${PACKAGES}/All
#   ${PACKAGES}/${CATEGORY}
#   ${PKG_PATH}
#
find_package () {
    echo "${PORTS}/${CATEGORY}/${NAME}:${PACKAGES}/All:${PACKAGES}/${CATEGORY}:${PKG_PATH}" |
    tr : '\n' |
    while read d; do
        test -d "${d}" || continue
        PKG=$(ls ${d}/${PKGNAME}.* 2>/dev/null)
        test $? -eq 0 && echo "${PKG}" && return
    done
}

#
# Parse command line arguments.
#
args=`getopt hnp $*`
if test $? != 0; then
    usage
fi
set -- $args
DRYRUN=
CHKPKG=
for i; do
    case "$i" in
    -n) DRYRUN="yes"; shift;;
    -p) CHKPKG="yes"; shift;;
    --) shift; break;;
    *) usage;;
    esac
done
if test $# -eq 1; then
    DATAFILE="$1"
else
    usage
fi

#
# Loop over the ports list.
#
while read CATEGORY NAME CMD; do
    case "${CATEGORY}" in
    \#*) continue;;
    '') continue;;
    esac
    DIR="${PORTS}/${CATEGORY}/${NAME}"
    if ! test -d "${DIR}"; then
        echo "$DIR does not exist -- ignored"
        continue
    fi
    cd ${DIR}
    PKGNAME=`make -V PKGNAME`
    if test -n "${CHKPKG}"; then
        PKG=$(find_package)
    else
        PKG=""
    fi
    if test -d "${DBDIR}/${PKGNAME}"; then
        echo "${CATEGORY}/${NAME} already installed as ${PKGNAME}"
        continue
    fi
    LOG="${LOGDIR}/${CATEGORY}+${NAME}"
    echo "===> Installing ${CATEGORY}/${NAME}; logging to ${LOG}"
    test -n "${CMD}" || CMD="make install < /dev/null"
    if test -n "${DRYRUN}"; then
        if test -n "${PKG}"; then
            echo pkg_add -v ${PKG}
        else
            echo "${CMD}"
        fi
        continue
    fi
    date "++++ Started %v %T +++" > ${LOG}
    STARTED=$(date +%s)
    (
        if test -n "${PKG}"; then
            echo "Found package ${PKG}"
            pkg_add -v ${PKG}
        else
            echo "CMD: ${CMD}"
            make clean
            eval "${CMD}"
            make clean # Uncomment if diskspace is tight under ${PORTS}.
        fi
    ) 2>&1 | tee -a ${LOG}
    FINISHED=$(date +%s)
    DURATION=$(dc -e "${FINISHED} ${STARTED} - p")
    date "++++ Finished %v %T after ${DURATION} secs +++" >> ${LOG}
done < stage_2.conf.${DATAFILE}

# vim: tabstop=4:
# EOF $RCSfile: stage_2.sh,v $

Сгрузите stage_2.sh.

Это мой файл stage_3.mk, который даст вам идею о том, как автоматизировать всю повторную конфигурацию.

# stage_3.mk - FreeBSD From Scratch, Stage 3: Ports Post-Configuration.
#              Usage: make -f stage_3.mk all     (config everything)
#                or   make -f stage_3.mk target  (to just config target)
#
# Author:      Jens Schweikhardt
#
# It is a good idea to make sure any target can be made more than
# once without ill effect.
#
# $Id: stage_3.mk,v 1.6 2004/01/10 19:33:07 toor Exp toor $
# $FreeBSD: doc/en_US.ISO8859-1/articles/fbsd-from-scratch/stage_3.mk,v 1.3 2004/01/21 19:39:26 schweikh Exp $

.POSIX:

message:
    @echo "Please use one of the following targets:"
    @echo "config_apache"
    @echo "config_firebird"
    @echo "config_inn"
    @echo "config_javaplugin"
    @echo "config_nullplugin"
    @echo "config_privoxy"
    @echo "config_sgml"
    @echo "config_smokeping"
    @echo "config_sudo"
    @echo "config_TeX"
    @echo "config_tin"
    @echo "config_uucp"
    @echo "all -- all of the above"


all: \
    config_apache \
    config_firebird \
    config_inn \
    config_javaplugin \
    config_nullplugin \
    config_privoxy \
    config_sgml \
    config_smokeping \
    config_sudo \
    config_TeX \
    config_tin \
    config_uucp

config_apache:
    # 1. Modify httpd.conf.
    perl -pi \
    -e 's/^\s*ServerAdmin.*/ServerAdmin schweikh\@schweikhardt.net/;' \
    -e 's/^\s*Listen.*/Listen 127.0.0.1:80/;' \
    -e 's/^\s*StartServers.*/StartServers 2/;' \
    -e 's/^\s*MinSpareServers.*/MinSpareServers 2/;' \
    -e 's,/usr/local/www/cgi-bin/,/home/opt/www/cgi-bin/,;' \
      /usr/local/etc/apache2/httpd.conf
    # 2. Restore symlinks to web pages.
    cd /usr/local/www/data; \
    ln -fs /home/schweikh/prj/homepage schweikhardt.net; \
    ln -fs /home/opt/www/test .
    # Test if the httpd.conf has changed.
    @if ! cmp -s /usr/local/etc/apache2/httpd.conf httpd.conf; then \
        echo "ATTENTION: the httpd.conf has changed. Please examine if"; \
        echo "the modifications are still correct. Here is the diff:"; \
        diff -u /usr/local/etc/apache2/httpd.conf httpd.conf; \
    fi
    if test -f /var/run/httpd.pid; then \
        /usr/local/etc/rc.d/apache2.sh restart; \
    else \
        /usr/local/etc/rc.d/apache2.sh start; \
    fi

config_firebird:
    # Make this group wheel writable to allow extensions being installed.
    chmod -R g+w /usr/X11R6/lib/firebird/lib/mozilla-1.5/chrome

config_inn:
    pw usermod -n news -d /usr/local/news -s /bin/sh
    mkdir -p /share/news/spool/outgoing \
             /share/news/spool/incoming \
             /share/news/spool/articles \
             /share/news/spool/overview \
             /share/news/spool/tmp      \
             /share/news/db
    chown -R news:news /share/news
    # Give the news system its initial configuration.
    cd /home/root/setup; \
    if test ! -f /share/news/db/active; then \
        echo "installing /share/news/db/active"; \
        install -C -o news -g news -m 664 active /share/news/db; \
    fi; \
    if test ! -f /share/news/db/newsgroups; then \
        echo "installing /share/news/db/newsgroups"; \
        install -C -o news -g news -m 664 newsgroups /share/news/db; \
    fi
    # The innd.sh that comes with the port is broken, it
    # checks for history.pag which does not exist.
    cd /home/root/setup; \
    install -C -o root -g wheel -m 555 innd.sh /usr/local/etc/rc.d
    # Configure storage method.
    cd /home/root/setup;      \
    printf "%s\n%s\n%s\n%s\n" \
        "method tradspool {"  \
        "  newsgroups: *"     \
        "  class: 0"          \
        "}"                   \
    >storage.conf;            \
    install -C -o news -g news -m 664 storage.conf /usr/local/news/etc
    # Configure newsfeeds.
    printf "%s\n%s\n" \
        "ME:*::"      \
        "shuttle/news2.shuttle.de:!junk,!control:B32768/512,Tf,Wfb:" \
    >/usr/local/news/etc/newsfeeds
    # Configure inn.conf.
    perl -pi                                                        \
    -e 's/^#*\s*(organization:\s*).*/$$1"An Open Pod Bay Door"/;'   \
    -e 's/^#*\s*(pathhost:\s*).*/$$1hal9000.schweikhardt.net/;'     \
    -e 's/^#*\s*(server:).*/$$1 localhost/;'                        \
    -e 's/^#*\s*(domain:).*/$$1 schweikhardt.net/;'                 \
    -e 's/^#*\s*(fromhost:).*/$$1 schweikhardt.net/;'               \
    -e 's,^#*\s*(moderatormailer:).*,$$1 \%s\@moderators.isc.org,;' \
    -e 's,^#*\s*(pathdb:\s*).*,$$1/share/news/db,;'                 \
    -e 's,/usr/local/news/spool,/share/news/spool,;'                \
    /usr/local/news/etc/inn.conf
    # Create empty history, if none there.
    # See post-install in /usr/ports/news/inn-stable/Makefile.
    cd /share/news/db; \
    if test ! -f history; then \
        touch history; \
        chmod 644 history; \
        chown news:news history; \
        su -fm news -c "/usr/local/news/bin/makedbz -i"; \
        for s in dir hash index; do \
            mv history.n.$${s} history.$${s}; \
        done; \
    fi
    # Configure send-uucp.
    echo shuttle:shuttle >/usr/local/news/etc/send-uucp.cf
    # Satisfy inncheck:
    cd /usr/local/news/etc; \
    chown news:news *; \
    chmod 640 control.ctl expire.ctl nntpsend.ctl readers.conf
    /usr/local/news/bin/inncheck
    # Test if the inn.conf has changed.
    @if ! cmp -s /usr/local/news/etc/inn.conf inn.conf; then \
        echo "ATTENTION: the inn.conf has changed. Please examine if"; \
        echo "the modifications are still correct. Here is the diff:"; \
        diff -u /usr/local/news/etc/inn.conf inn.conf; \
    fi
    if ! test -f /usr/local/news/run/innd.pid; then \
        /usr/local/etc/rc.d/innd.sh start; \
    fi

config_javaplugin:
    # Mozilla Firebird:
    cd /usr/X11R6/lib/firebird/lib/mozilla-1.5/plugins; \
    ln -fs /usr/local/jdk1.4.2/jre/plugin/i386/ns610/libjavaplugin_oji.so
    # Plain Mozilla:
    cd /usr/X11R6/lib/mozilla/plugins; \
    ln -fs /usr/local/jdk1.4.2/jre/plugin/i386/ns610/libjavaplugin_oji.so

# Move the nullplugin out of the way. With a .mozilla/*/*/prefs.js entry of
# user_pref("plugin.display_plugin_downloader_dialog", false);
# this suppresses popup dialogs for unavailable plugins (flash, shockwave, ...)
NULLPLUGINS = /usr/X11R6/lib/mozilla/libnullplugin.so \
              /usr/X11R6/lib/mozilla/plugins/libnullplugin.so

config_nullplugin:
    for p in $(NULLPLUGINS); do \
        if test -r $$p; then    \
            mv $$p $$p.orig;    \
        fi;                     \
    done

config_privoxy:
    install -C -o root -g wheel -m 644 conf/privoxy/config \
        /usr/local/etc/privoxy
    install -C -o root -g wheel -m 755 conf/privoxy/privoxy.sh \
        /usr/local/etc/rc.d
    /usr/local/etc/rc.d/privoxy.sh restart

config_sgml:
    cp -p /usr/local/share/gmat/sgml/ISO_8879-1986/entities/* \
          /usr/local/share/sgml/docbook/4.1

config_smokeping:
    cp conf/smokeping/config conf/smokeping/basepage.html \
        /usr/local/etc/smokeping
    /usr/local/etc/rc.d/smokeping.sh stop
    /usr/local/etc/rc.d/smokeping.sh start

config_sudo:
    if ! grep -q schweikh /usr/local/etc/sudoers; then \
        echo 'schweikh ALL = (ALL) NOPASSWD: ALL' >> /usr/local/etc/sudoers; \
    fi

config_TeX:
    # textproc/docproj advises: to typeset the FreeBSD Handbook with JadeTeX,
    # change the following settings to the listed values:
    perl -pi                                   \
    -e 's/^% original texmf.cnf/% texmf.cnf/;' \
    -e 's/^(hash_extra\s*=).*/$${1}60000/;'    \
    -e 's/^(pool_size\s*=).*/$${1}1000000/;'   \
    -e 's/^(max_strings\s*=).*/$${1}70000/;'   \
    -e 's/^(save_size\s*=).*/$${1}10000/;'     \
    /usr/local/share/texmf/web2c/texmf.cnf
    # Test if the texmf.cnf has changed.
    @if ! cmp -s /usr/local/share/texmf/web2c/texmf.cnf texmf.cnf; then \
        echo "ATTENTION: the texmf.cnf has changed. Please examine if"; \
        echo "the modifications are still correct. Here is the diff:"; \
        diff -u /usr/local/share/texmf/web2c/texmf.cnf texmf.cnf; \
    fi

config_tin:
    # Point tin to our files.
    printf "%s\n%s\n%s\n"                          \
        "activefile=/share/news/db/active"         \
        "newsgroupsfile=/share/news/db/newsgroups" \
        "spooldir=/share/news/spool/articles"      \
    >/usr/local/etc/tin.defaults

config_uucp:
    cd /etc/mail; make install SENDMAIL_MC=/etc/mail/hal9000.mc
    # Make the uucp user's shell the correct uucico, so su(1) works.
    chpass -s /usr/local/libexec/uucp/uucico uucp
    # UUCP expects to find /usr/bin/rnews.
    cd /usr/bin; ln -fs ../local/news/bin/rnews .
    # Actual UUCP configuration.
    echo nodename js2015           > /usr/local/etc/uucp/config
    echo shuttle js2015 `cat uucp` > /usr/local/etc/uucp/call
    printf 'port tcp\ntype tcp\n'  > /usr/local/etc/uucp/port
    printf "%s\n%s\n%s\n%s\n%s\n%s\n%s\n" \
        "call-login    *"                 \
        "call-password *"                 \
        "time          any"               \
        "system        shuttle"           \
        "address       mail.s.shuttle.de" \
        "commands      rmail rnews"       \
        "port          tcp"               \
    >/usr/local/etc/uucp/sys
    cd /usr/local/etc/uucp; chown uucp:uucp *; chmod o-rwx *
    # Trigger uucico after booting.
    mkdir -p /usr/local/etc/rc.d; cp uucp.sh /usr/local/etc/rc.d

# vim: tabstop=4:
# EOF $RCSfile: stage_3.mk,v $

Сгрузите stage_3.mk.