The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации | Linux

Linux Frequently Asked Questions with Answers (Part 5 of 6)


Archive-Name: linux/faq/part5
URL: http://www.mainmatter.com/
Reply-to: [email protected]
Posting-Frequency: weekly
Last-modified: 12/04/2001

If the system uses Red Hat-style configuration files, the respective
time zone info files are /usr/share/zoneinfo and /etc/localtime.

The manual pages for tzset or tzselect describe setting the time zone.
Some programs recognize the "TZ" environment variable, but this is not
POSIX-correct.

You should also make sure that your Linux kernel clock is set to the
correct GMT time. Type date -u and check that the correct UTC time is
displayed. ("The Computer Has the Wrong Time.")

7.11. Dial-up PPP Configuration.

This information is mainly for people who do not have a wrapper
utility like kppp or pppconfig, or are not able to get those utilities
to work correctly. If you need to manually configure PPP to dial in to
your ISP, you will need the following information:

  * The port that your modem is connected to: /dev/ttyS0-/dev/ttyS3,
    which correspond to COM1-COM4 under MS-DOS.
  * The phone number of your ISP's data connection.
  * The user name and password that your ISP gave you.
  * The IP addresses of the primary and possibly secondary Domain Name
    Service that you will use when dialing in to the ISP. This assumes
    that you will not be using a DNS that you installed on your
    system.
    
When you have all of this information, make sure that the programs
pppd and chat, at the very minimum, are installed correctly. In most
current distributions, they are installed in the /usr/sbin/ directory,
and you will need to be logged in as root to use them. In addition,
the following programs are also useful for configuring network
connections, determining network status, and diagnosing problems:
/sbin/ifconfig, /sbin/route, /bin/ping, /usr/sbin/traceroute.

These are the basic steps that you need to follow to configure PPP.
You must be logged in as root.

  * Make sure that the serial port and modem are operating correctly.
    Using a program like minicomm or kermit, you should be able to
    send AT commands to the modem and receive the OK string in
    response from the modem.
  * Enter the primary and possibly secondary Domain Name Server IP
    addresses in the /etc/resolv.conf file, using dotted quad
    notation, with the nameserver label. For example:
    
order hosts,bind
nameserver 196.182.101.103
nameserver 196.182.101.104
    
    The nameserver addresses in the example above are examples only.
    They don't correspond to actual network hosts.
    The first line, order hosts,bind, tells your networking software,
    when it resolves network domain addresses, to first look in the
    /etc/hosts file, and then use the bind service; i.e., the DNS
    servers, which are specified on the lines that begin with
    nameserver.
  * Locate the chat script that PPP will use to dial the modem and
    connect to your ISP. In many systems, this is either in the
    /etc/chatscripts or /etc/ppp directory, and will be called
    provider or something similar. You can store a chat script
    anywhere, provided that you tell pppd to use it rather than the
    default script. Refer to the chat and pppd manual pages, and the
    information below, for details. Here is a sample chat script:
    
ABORT        BUSY
ABORT        "NO CARRIER"
ABORT        VOICE
ABORT        "NO DIALTONE"
""           ATDT<your_isp's_phone_number>
ogin         <your_user_name>
word         <your_password>
    
    This is a chat program for a simple, script based login. The chat
    program uses the pair of strings on each line as a match/response
    pair. When it starts, it sends the string
    "ATDTyour_isp's_phone_number," where you have substituted the
    actual phone number of course. It then waits for the string ogin
    (a substring of the word login) and sends your user name. It then
    waits for word (a substring of password) and sends your password.
    If your ISP uses a different login and password prompts, and any
    additional prompts, you will need to edit the script accordingly.
    Again, refer to the chat manual page for details.
    If your ISP uses PAP or CHAP authentication, you will need to edit
    the pap-secrets or chap-secrets files in /etc/ppp directory as
    well. Refer to the manual pages for these files, as well as the
    instruction in the files themselves.
  * The configuration of pppd, the program that maintains the actual
    connection, is usually contained in two or three separate files.
    The first is usually /etc/ppp/options, which contains options that
    all of your system's PPP connections will use. (Yes, you can have
    more than one; as many as your computer has serial ports,
    generally.)
    Here is a sample /etc/ppp/options file:
    
# /etc/ppp/options

asyncmap 0
auth
crtscts
lock
noipx

# ---<End of File>---
    
    The options may be given on one line or each on a separate line.
    Many options files are much longer, and come with a description of
    each option. Here, the options mean, in order, don't remap any
    characters between the PPP client and server; always use password,
    PAP, or CHAP authentication when making a connection; use the
    modem's hardware handshake lines for flow control; lock the serial
    port when in use so no other programs can access it; and do not
    use the IPX network protocol.
  * For connection set-up on each individual serial port or PPP host,
    there will either be an /etc/ppp/options.ttyS1, for example,
    options file for /etc/ttyS1, or a file for your ISP in the
    /etc/ppp/peers directory. The default is often called
    /etc/ppp/peers/provider. Here is a sample of the default provider
    file:
    
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"
defaultroute
/dev/ttyS1
38400
persist
    
    There might be an explanation of these and other options in the
    /etc/ppp/peers/provider file itself. You can also refer to the
    pppd manual page for details. Briefly, they mean: do not use PAP
    authentication for this connection; use the chat program and the
    /etc/chatscripts/provider script, which is described above, to
    dial the phone and log in; set the network default route to the
    PPP connection (so when your network software needs to resolve an
    network address that is not on your local machine(s), it will use
    the PPP connection to the Internet); use /dev/ttyS1 as the serial
    port for the connection; set the modem speed to 38400; and keep
    the pppd daemon running even if the connection fails.
  * That is all of the configuration you need. To actually start and
    stop PPP, there are often /usr/bin/pon and /usr/bin/poff scripts
    (in Debian), or something similar, and they are usually very
    simple, and only contain the command:
    
$ /usr/sbin/pppd call ${1:-provider}

    This will start pppd and use the call option to call the server
    that you type on the command line, or the provider given in the
    /etc/ppp/peers/provider file if you do not specify a remote
    server. After making the call and logging in (about 30 seconds),
    you should be able to use the /sbin/ifconfig program to determine
    that the connection really did establish a PPP interface (the
    first will be ppp0, the second will be ppp1, etc., depending on
    how many simultaneous PPP connections you have. If something goes
    wrong, you can look at the /var/log/ppp.log file to determine what
    happened. You can also view the log as the connection is being
    made, by "tailing" it in another window; that is, viewing it as
    pppd logs the connection's status information. To do this, use the
    command (again, as root):
    
$ tail -f /var/log/ppp.log

    On some systems the PPP output is directed to /var/log/messages,
    in which case your system may not have a dedicated PPP log file.
    
You should be also able to ping one of your ISP's domain names (e.g.,
mail.isp.com) and receive a response.

These are the most basic steps for configuring a PPP connection. You
will also need to take into account what other network connections may
be present (for example, if there's an Ethernet connection that has
already been assigned the default route), as well as various security
measures at your ISP's end. If you're having trouble making the
dial-up connection, usually the best way to determine what may be
going wrong is to use Seyon, minicomm, kermit, or some other program
to dial and log in manually to the ISP, and determine just exactly
what you have to do to log in, then duplicate that in the PPP scripts.

Most Linux documentation also has additional instructions for
configuring PPP connections. Refer to ("Where Are the Linux FTP
Archives?") ("Where Is the Documentation?")

7.12. What Version of Linux and What Machine Name Is This?

Type:

   $ uname -a

7.13. What Is a "core" File?

A core file is created when a program terminates unexpectedly, due to
a bug, or a violation of the operating system's or hardware's
protection mechanisms. The operating system kills the program and
creates a core file that programmers can use to figure out what went
wrong. It contains a detailed description of the state that the
program was in when it died.

If would like to determine what program a core file came from, use the
file command, like this:

   $ file core

That will tell you the name of the program that produced the core
dump. You may want to write the maintainer(s) of the program, telling
them that their program dumped core.

[Eric Hanchrow]

7.14. How To Enable or Disable Core Dumps.

By using the ulimit command in bash, the limit command in tcsh, or the
rlimit command in ksh. See the appropriate manual page for details.

This setting affects all programs run from the shell (directly or
indirectly), not the whole system.

If you wish to enable or disable core dumping for all processes by
default, you can change the default setting in linux/sched.h. Refer to
definition of INIT_TASK, and look also in linux/resource.h.

PAM support optimizes the system's environment, including the amount
of memory a user is allowed. In some distributions this parameter is
configurable in the /etc/security/limits.conf file. For more
information, refer to the Linux Administrator's Security Guide.
("Where Is the Documentation?")

7.15. How To Upgrade/Recompile a Kernel.

See the Kernel HOWTO or the README files which come with the kernel
release on ftp.cs.helsinki.fi/pub/Software/Linux/Kernel/ and mirrors.
(See "Where Are the Linux FTP Archives?") You may already have a
version of the kernel source code installed on your system, but if it
is part of a standard distribution it is likely to be somewhat out of
date (this is not a problem if you only want a custom configured
kernel, but it probably is if you need to upgrade.)

With newer kernels you can (and should) make all of the following
targets. Don't forget that you can specify multiple targets with one
command.

   $ make clean dep install modules modules_install

Also remember to update the module dependencies.

   $ depmod -a

This command can be run automatically at boot time. On Debian/GNU
Linux systems, the command is part of the /etc/init.d/modutils script,
and can be linked appropriately in the /etc/rcx.d/ directories. For
more information on depmod, see the manual page.

Make sure you are using the most recent version of the modutils
utilities, as well as all other supporting packages. Refer to the file
Documentation/Changes in the kernel source tree for specifics, and be
sure to consult the README file in the modutils package.

Remember that to make the new kernel boot you must run lilo after
copying the kernel into your root partition. The Makefile in some
kernels have a special zlilo target for this; try:

   $ make zlilo

On current systems, however, you can simply copy the zImage or bzImage
file (in arch/i386/boot/ to the /boot/ directory on the root file
system, or to a floppy using the dd command. Refer also to the
question, How do I get LILO to boot the kernel image?

Kernel version numbers with an odd minor version (ie, 1.1.x, 1.3.x)
are the testing releases; stable production kernels have even minor
versions (1.0.x, 1.2.x). If you want to try the testing kernels you
should probably subscribe to the linux-kernel mailing list. ("What
Mailing Lists Are There?")

The Web site http://www.kernelnotes.org/ has lots of information and
links to other sites that provide information about Linux kernel
updates.

Also refer to the questions, "The PCMCIA Card Doesn't Work after
Upgrading the Kernel." and "How To Get LILO to Boot the Kernel Image."

7.16. Can Linux Use More than 3 Serial Ports by Sharing Interrupts?

Yes, but you won't be able to use simultaneously two ordinary ports
which share an interrupt (without some trickery). This is a limitation
of the ISA Bus architecture.

See the Serial HOWTO for information about possible solutions and
workarounds for this problem.

7.17. Configuring Emacs's Default Settings.

Create a file in your home directory named .emacs with the Emacs Lisp
commands that you want to run every time Emacs starts up. You won't
see the file in the directory listing. (The leading '.' tells ls not
to display it, unless you use the -a command line switch with ls.)

Any kind of Emacs Lisp statement will work in the .emacs file,
including entire defuns. Emacs uses lisp variables and statements
extensively, and many of the editing functions are written in Emacs
Lisp. For example, to enable word wrapping whenever you edit a file
that ends with .txt, add the following statement. This is from the
Emacs Texinfo help document ( F1-i, then m Emacs Return):

(add-hook text-mode-hook
     '(lambda () (auto-fill-mode 1)))

This adds a statement that calls a hook function whenever a text
editing mode is entered for that buffer. The value of text-mode-hook,
which is a variable, to auto-fill-mode, which is a function.

If you want to turn off the menu bar at the top of each Emacs frame,
add this statement:

(menu-bar-mode -1)

And if you want to include an Emacs Lisp program that someone has
written, like msb.el (an enhanced, pop-up buffer menu), make sure the
lisp file is in a directory where Emacs can find it (usually it will
be named Site-lisp), and add these statements in the .emacs file:

(require 'msb)
(msb-mode 1)

Most tasks have several possible solutions in Emacs Lisp. Any task
that can be programmed in Emacs Lisp is valid in the .emacs file. For
more information, consult the Texinfo documentation. There is also a
FAQ list for Emacs (refer to: What other FAQ's are there for Linux? ).

7.18. How To Make a Rescue Floppy.

Make a file system on it with bin, etc, lib and dev
directories--everything you need. Install a kernel on it and arrange
to have LILO boot it from the floppy (see the LILO documentation, in
lilo.u.*.ps).

If you build the kernel (or tell LILO to tell the kernel) to have a
RAM disk the same size as the floppy the RAM disk will be loaded at
boot time and mounted as root in place of the floppy.

See the Bootdisk HOWTO.

7.19. How To Remap a Keyboard to UK, French, Etc.?

For recent kernels, get /pub/Linux/system/Keyboards/kbd-0.90.tar.gz
from ftp://metalab.unc.edu/. Make sure you get the appropriate
version; you have to use the right keyboard mapping package for your
kernel version. For older kernels you have to edit the top-level
kernel Makefile, in /usr/src/linux/. You may find more helpful
information in The Linux Keyboard and Console HOWTO, by Andries
Brouwer, at ftp://metalab.unc.edu/pub/Linux/docs/HOWTO/.

7.20. How To Get NUM LOCK to Default to On.

Use the setleds program, for example (in /etc/rc.local or one of the
/etc/rc.d/* files):

for t in 1 2 3 4 5 6 7 8
do
 setleds +num < /dev/tty$t > /dev/null
done

setleds is part of the kbd package ("How do I remap my keyboard to UK,
French, etc.? "). Alternatively, patch your kernel. You need to
arrange for KBD_DEFLEDS to be defined to (1 << VC_NUMLOCK) when
compiling drivers/char/keyboard.c.

7.21. How To Set (Or Reset) Initial Terminal Colors.

The following shell script should work for VGA consoles:

for n in 1 2 4 5 6 7 8; do
  setterm -fore yellow -bold on -back blue -store > /dev/tty$n
  done

Substitute your favorite colors, and use /dev/ttyS$n for serial
terminals.

To make sure they are reset when people log out (if they've been
changed):

Replace the references to getty (or mingetty or uugetty or whatever)
in /etc/inittab with references to /sbin/mygetty.

#!/bin/sh
setterm -fore yellow -bold on -back blue -store > $1
exec /sbin/mingetty $@

[Jim Dennis]

7.22. How To Have More Than 128Mb of Swap.

Use several swap partitions or swap files. Linux kernels before
version 2.2 supported up to 16 swap areas, each of up to 128Mb. Recent
versions do not have this limitation.

Very old kernels only supported swap partition sizes up to 16Mb.

Linux on machines with 8KB paging, like Alpha and Sparc64, support a
swap partition up to 512MB. The 128MB limitation comes from
PAGE_SIZE*BITSPERBYTE on machines with 4KB paging, but is 512KB on
machines with 8KB paging. The limit is due to the use of a single page
allocation map.

The file mm/swapfile.c has all of the gory details.

[Peter Moulder, Gordon Weast]

How To Prevent Errors when Linking Programs with Math Functions.

Older run-time libraries included the math library in the C run-time
library. It was not necessary to specify the math library separately
when compiling. If the compiler generates a message like this when
linking a program that uses math functions:

/tmp/ccDUQM4J.o: In function `main':
/tmp/ccDUQM4J.o(.text+0x19): undefined reference to `sqrt'
collect2: ld returned 1 exit status

You need use the -lm option with GCC to link with the math libraries:

   # gcc -o program program.c -lm

Make sure also to use the statement #include <math.h> in the source
file.

[Florian Schmidt]

8. Miscellaneous Information and Questions Answered

8.1. How To Program XYZ Under Linux.

Read the manuals, or a good book on Unix and the manual pages (type
man man). There is a lot of GNU Info documentation, which is often
more useful as a tutorial. Run Emacs and type F1-i, or type info info
if you don't have or don't like Emacs. Note that the Emacs libc node
may not exactly describe the latest Linux libc, or GNU glibc2. But the
GNU project and LDP are always looking for volunteers to upgrade their
library documentation.

Anyway, between the existing Texinfo documentation, and the manual
pages in sections 2 and 3, should provide enough information to get
started.

As with all free software, the best tutorial is the source code
itself.

The latest release of the Linux manual pages, a collection of useful
GNU Info documentation, and various other information related to
programming Linux, can be found on
metalab.unc.edu/pub/Linux/docs/man-pages/.

8.2. What's All This about ELF? glibc?

See the ELF HOWTO by Daniel Barlow. Note that this is not the file
move-to-elf, which is a blow-by-blow account of how to upgrade to ELF
manually.

Linux has two different formats for executables, object files, and
object code libraries, known as, "ELF." (The old format is called
"a.out.") They have advantages, including better support for shared
libraries and dynamic linking.

Both a.out and ELF binaries can coexist on a system. However, they use
different shared C libraries, both of which have to be installed.

If you want to find out whether your system can run ELF binaries, look
in /lib for a file named, "libc.so.5." If it's there, you probably
have ELF libraries. If you want to know whether your installation
actually is ELF you can pick a representative program, like ls, and
run file on it:

-chiark:~> file /bin/ls
/bin/ls: Linux/i386 impure executable (OMAGIC) - stripped

valour:~> file /bin/ls
/bin/ls: ELF 32-bit LSB executable, Intel 80386, version 1, stripped

There is a patch to get 1.2.x to compile using the ELF compilers, and
produce ELF core dumps, at ftp://tsx-11.mit.edu/pub/packages/GCC/. You
do not need the patch merely to run ELF binaries. 1.3.x and later do
not need the patch at all.

The GNU glibc2 libraries are essentially more recent versions of ELF
libraries that follow most of the same processes for dynamic linking
and loading. Upgrade information is contained in ("How To Upgrade the
Libraries without Trashing the System.")

8.3. How To Determine What Packages Are Installed on a System.

For distributions that use RPM format packages, use the command:

   $ rpm -qa

You need to be logged in as root. You can save the output to a text
file for future reference, a command like:

   $ rpm -qa >installed-packages

For Debian systems, the equivalent command is:

   $ dpkg -l

8.4. What Is a .gz File? And a .tgz? And .bz2? And... ?

gz (and .z) files are compressed using GNU gzip. You need to use
gunzip (which is a symlink to the gzip command that comes with most
Linux installations) to unpack the file.

taz, .tar.Z, and .tz are tar files (made with tar) and compressed
using compress. The standard *nix compress is proprietary software,
but free equivalents like ncompress exist.

tgz (or .tpz) is a tar file compressed with gzip.

bz2 is a file compressed by the more recently introduced (and
efficient) bzip2.

lsm is a Linux Software Map entry, in the form of a short text file.
Details about the LSM project and the LSM itself are available in the
subdirectory on ftp://metalab.unc.edu/pub/Linux/docs/.

deb is a Debian Binary Package--the binary package format used by the
Debian GNU/Linux distribution. It is manipulated using dpkg and
dpkg-deb (available on Debian systems and from
ftp://ftp.debian.org//).

rpm is a Red Hat RPM package, which is used in the Red Hat and
similar distributions.

sit is a compressed Macintosh archive made with StuffIt, a commercial
program. Aladdin Systems Inc., the manufacturer of StuffIt, has a free
expander utility that will uncompress these archives. You can download
it at http://www.aladdinsys.com/expander/.

The file command can often tell you what a file is.

If you find that gzip complains when you try to uncompress a file, you
probably downloaded it in ASCII mode by mistake. You must download
most things in binary mode: "get," to download the file.

8.5. What Does VFS Stand For?

Virtual File System. It's the abstraction layer between the user and
real file systems like ext2, Minix and MS-DOS. Among other things, its
job is to flush the read buffer when it detects a disk change on the
floppy disk drive.

   VFS: Disk change detected on device 2/0

8.6. What is a BogoMip?

"BogoMips" is a combination of Bogus and Mips. MIPS stands for
(depending on who you ask) Millions of Instructions per Second, or
Meaningless Indication of Processor Speed.

The number printed at boot time is the result of a kernel timing
calibration, used for very short delay loops by some device drivers.

According to the BogoMips mini-HOWTO, the rating for your machine will
be:

                    Common BogoMips Ratings

Processor                  BogoMips         Comparison
Intel 8088                 clock * 0.004    0.02
Intel/AMD 386SX            clock * 0.14     0.8
Intel/AMD 386DX            clock * 0.18     1 (definition)
Motorola 68030             clock * 0.25     1.4
Cyrix/IBM 486              clock * 0.34     1.8
Intel Pentium              clock * 0.40     2.2
Intel 486                  clock * 0.50     2.8
AMD 5x86                   clock * 0.50     2.8
Mips R4000/R4400           clock * 0.50     2.8
Nexgen Nx586               clock * 0.75     4.2
PowerPC 601                clock * 0.84     4.7
Alpha 21064/21064A         clock * 0.99     5.5
Alpha 21066/21066A         clock * 0.99     5.5
Alpha 21164/21164A         clock * 0.99     5.5
Intel Pentium Pro          clock * 0.99     5.5
Cyrix 5x86/6x86            clock * 1.00     5.6
Intel Pentium II/III       clock * 1.00     5.6
Intel Celeron              clock * 1.00     5.6
Mips R4600                 clock * 1.00     5.6
Alpha 21264                clock * 1.99     11.1
AMD K5/K6/K6-2/K6-III      clock * 2.00     11.1
UltraSparc II              clock * 2.00     11.1
Pentium MMX                clock * 2.00     11.1
PowerPC 604/604e/750       clock * 2.00     11.1
Motorola 68060             clock * 2.01     11.2
Motorola 68040             Not enough data (yet).
AMD Athlon                 Not enough data (yet).
IBM S390                   Not enough data (yet).

If the number is wildly lower, you may have the Turbo button or CPU
speed set incorrectly, or have some kind of caching problem (as
described in ("When Adding More Memory, the System Slows to a Crawl.")

For values people have seen with other, rarer, chips, or to calculate
your own BogoMips rating, please refer to the BogoMips Mini-HOWTO, on
ftp://metalab.unc.edu/. ("Where Is the Documentation?")

[Wim van Dorst]

8.7. What Online/Free Periodicals Exist for Linux?

There are a number of recent additions to the list of periodicals
devoted to Linux and free software:

  * geek news. http://geeknews.cjb.net/. Headlines for articles about
    Linux, like the comp.os.linux.announce and Techweb postings, and
    general interest, like Associated Press stories.
  * Linux Gazette. http://www.linuxgazette.com/. This is the
    longest-running of the on-line periodicals, and the only one that
    publishes source code.
  * Linux Today. http://www.linuxtoday.com. News and opinion related
    to the Linux community, updated daily.
  * Linux Weekly News. http://lwn.net. News about the Linux community,
    updated weekly.
  * Slashdot. http://www.slashdot.org. News about the free software
    community and culture.
  * Freshmeat. http://www.freshmeat.net/. Notices of new and updated
    software for Linux and other free OS's.
    
Please send additions to this list to the FAQ maintainer.

[Jim Dennis, Robert Kiesling]

8.8. How Many People Use Linux?

Linux is freely available, and no one is required to register with any
central authority, so it is difficult to know. Several businesses
survive solely on selling and supporting Linux. Linux news groups are
some of the most heavily read on Usenet. Accurate numbers are hard to
come by, but the number is almost certainly in the millions.

However, people can register as Linux users at the Linux Counter
project, which has been in existence since 1993. In August, 1998, the
project counted more than 70,000 users.

Visit the Web site at http://counter.li.org/ and fill in the
registration form. If you don't want to use the Web, send E-mail to
[email protected] with the subject line, "I use Linux at home,"
or "I use Linux at work."

The current count is posted monthly to comp.os.linux.misc, and is
always available from the Web site.

[Harald Tveit Alvestrand]

8.9. How Many People Use Linux? (Redux.)

In 1999, International Data Corporation released its first commercial
forecast of Linux sales. The report quantifies Linux vendor sales in
1996, 1997, and 1998, and forecasts through the year 2003.

To obtain the report, contact IDC at [email protected]. Their Web site
is http://www.itresearch.com/.

8.10. What Is the Best (Distribution|SCSI Card|Editor|CD-ROM Drive|....)

The "best" of anything depends on your particular needs. Discussions
like these frequently occur on Usenet. Most often they're flame bait.
Answering is generally a waste of time. Free software licensing is
unrestrictive enough, that, with a little experience, you can perform
your own testing on your own hosts.

A better way to phrase a specific inquiry might be: "Where can I
find...."

8.11. How Does One Pronounce Linux?

This question produces an outrageous amount of heated debate.

If you want to hear Linus himself say how he pronounces it, download
english.au or swedish.au from
ftp.funet.fi/pub/Linux/PEOPLE/Linus/SillySounds/. If you have a sound
card or the PC-speaker audio driver you can hear them by typing

   $ cat english.au >/dev/audio

The difference isn't in the pronunciation of Linux but in the language
Linus uses to say, "hello."

For the benefit of those who don't have the equipment or inclination:
Linus pronounces Linux approximately as Leenus, where the "ee" is
pronounced as in "feet," but rather shorter, and the "u" is like a
much shorter version of the French "eu" sound in "peur" (pronouncing
it as the "u" in "put" is probably passable).

9. Frequently Encountered Error Messages

9.1. Modprobe Can't Locate Module, XXX, and Similar Messages.

These types of messages mostly occur at boot time or shutdown. If
modprobe, insmod, or rmmod complain about not being able to find a
module, add the following to the /etc/modules.conf or
/etc/modutils/aliases file, whichever is present on your system.

   $ alias <module-name> off

And use the name of the module that appears in the error message.

[J.H.M. Dassen]

9.2. Unknown Terminal Type "linux" and Similar.

In early kernels the default console terminal type has changed from
"console" to "linux." You must edit /etc/termcap to change the line
reading:

   console|con80x25:\

to

   linux|console|con80x25:\

(there may be an additional "dumb" in there--if so it should be
removed.)

To get the editor to work you may need type:

   $ TERM=console

(for bash and ksh), or

   $ setenv TERM console

for csh or tcsh.

Some programs use /usr/lib/terminfo instead of /etc/termcap. For these
programs you should upgrade your terminfo package, which is part of
ncurses.

The same is true for X terminal displays. If your distribution sets
the TERM to something strange like xterm-24-color, you can simply
reset it to a generic value from the command line:

   $ TERM="xterm"; export TERM

9.3. INET: Warning: old style ioctl... called!

You are trying to use the old network configuration utilities. The new
ones can be found on
ftp.linux.org.uk/pub/linux/Networking/PROGRAMS/NetTools/ (source only,
I'm afraid).

Note that they cannot be used just like the old-style programs. See
the NET-2 HOWTO for instructions on how to set up the old-style
networking programs correctly. Even better, see the NET-3 HOWTO and
upgrade your networking software.

9.4. ld: unrecognized option '-m486'

You have an old version of ld. Install a newer binutils package that
contains an updated ld. Look on tsx-11.mit.edu in




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру