Партнёры:
Хостинг:
Archive-name: ppp-faq/part5
Version: $Revision: 3.27 $
Last-modified: $Date: 1996/05/27 18:10:09 $
URL: http://cs.uni-bonn.de/ppp/part5.html
Free PPP Software Packages
5. FREE PPP SOFTWARE PACKAGES
Free PPP FOR SunOS 4.1.x
Free PPP for BSD
Free PPP for SVR4
Free PPP for MSDOS
Free PPP for AmigaOS
Free PPP for NeXT
Free PPP for Macintosh
Free PPP for Ultrix
Free PPP for Linux
5.1 free PPP FOR SunOS 4.1.x
5.1.1 PPP-2.2 FOR BSD, SUNOS 4.X, ULTRIX AND LINUX
Authors Paul Mackerras <[email protected]>,
Brad Parker <[email protected]> and contributors
Ultrix port: [email protected] (Per
Sundstrom) and
[email protected] (Robert Olsson)
Linux port: Michael Callahan
<[email protected]>
and Al Longyear <[email protected]>
Architectures Sunos 4.x at least on Sparc,
Solaris 2.x at least on Sparc and x86
NetBSD at least on 80?86 and Amiga
Ultrix on DECstations
Linux on 80386/80486/Pentium
FTP archives dcssoft.anu.edu.au:/pub/ppp/ ppp-2.1.2.tar.gz
Also from merit.edu:/pub/ppp/sunos-new
Self-Description ppp-2.1.1 is now available from
dcssoft.anu.edu.au, and shortly from merit.edu in
/pub/ppp or /pub/ppp/sunos-new, I hope. This
release includes Linux support, thanks to Michael
Callahan and Al Longyear, as well as SunOS 4.x,
{386,Net,Free}BSD and Ultrix (which were supported
in previous versions).
Other new and changed features in this version include:
security improvements
improvements and a man page for chat (thanks to Al Longyear)
pppd can now use LCP echo-requests to check that the serial
connection is intact, and terminate the link if
not (from the Linux port)
pppd can now reads a port-specific options file
(/etc/ppp/options.)
new pppd options vj-max-slots and -vjccomp to control how many
connection IDs the VJ header compressor will use,
and whether it can compress the
connection ID
several bugs fixed
Paul Mackerras [email protected] Dept. of Computer Science Aust
ralian National University
... The main change [of 2.0] from ppp-1.3.1 is that the new release
contains a substantially improved version of pppd.
New features in pppd include:
Vastly improved security and authentication features
Conforms to RFCs 1331, 1332, 1334
Reads options from files as well as the command line
Does proxy-ARP and default route creation if requested
Paul Mackerras <[email protected]>
Comment ppp-2.2 included in NetBSD distributions,
reported to work on NetBSD-Amiga and -i386
ppp-2.3beta in NetBSD-current ppp-2.0.4 is
reported to work on NetBSD-Intel and
SunOS-4.x-Sparc (did anybody try NetBSD-Sparc?)
ppp-2.1.2 works on Linux on Intel (did anybody try
Linux/680x0, e.g. Amiga?)
Problems PPP 2.1.2 on a VAX Ultrix On VAXes with RTS/CTS
flow control I can run the serial port at 19.2K
and use an MRU of 1500. On VAXes with MMJ serial
connectors without RTS/CTS flow control, I have to
use MRU 296 but still specify the crtscts option
to pppd, even though the hardware doesn't support
it.
Barry Kort <[email protected]>
5.1.2 DP-2.3
Authors Kirk Smith <[email protected]>,
[email protected] and others
Features demand-dial, filtering, header compression,
server and client, scripting;
SunOS loadable modules partially supported
Comment basically dp-2.2-beta with typos corrected and
non-sun4c kernel
architecture supported (tested on sun4c, sun4m and
sun3
machines, but has problems on sun3x
architectures). It has a
configuration file, which tells where the other
configuration
files are. Loadable modules work as long as you
don't unload
them. Finally survives even talk(1) without
crashing the
machine. If you see older versions, especially
dp-2.0.tar.Z, toss them immediately!
Plans Solaris 2.1 (sunos 5.1) is supported in the
dp-3.1 version (see chapter SVR4).
Mailing list maintainer
[email protected]
Mailing-list [email protected] (don't send 'add'
or 'delete' requests here!!!
FTP archive
[email protected]:pub/
WWW document http://www.acn.purdue.edu/dp/dp.html
5.1.3 PERKINS/CLEMENTS/FOX/CHRISTY PPP FOR SUNOS
Last version patch level 6 of 1991-10-04
Anonymous FTP [not cited to protect the innocent]
Comment should be considered out of date. You need at
least a special patch to fix
most of a memory leak, and might have other
problems. Successor
packages are dp-2.3/3.0 and
ppp-2.1.
5.2 free PPP for BSD:
5.2.1 PPP-2.2
see above.
5.3 free PPP for SVR4
5.3.1 ...FOR GENERIC SVR4
Author
Marc Boucher <[email protected]>
Public FTP archive
FTP.CAM.ORG:/systems/un
ix/svr4/CAM-pppd-0.85.tar.gz.
self-description The current version is 0.85. Basic support for
synchronous PPP and BinTec ISDN was recently
added. The wrong interface initialization order
resulting in in_interfaces not being incremented
properly have been fixed. ... Unlimited
redistribution is now allowed. The software is
being released AS-IS. I currently do not have time
to provide support or implement further
enhancements, sorry. The future of the package is
uncertain. If someone is willing to pick it up, or
integrate my SVR4 changes in a newer PPP package,
feel free.
Marc Boucher
Comment CAM PPP does not work! I have the patches
necessary to make ppp-2.2 work on generic SVR4.
These are very small patches and make ppp-2.2 work
on generic SVR4 just the same way it works on
Solaris, AIX, etc., etc.
[email protected]
5.3.2 ...SUNOS 5.X/SOLARIS 2.X
dp-3.1 (Solaris 2.x version of dp-2.3)
dp-3.1 has been out for quite a while. It works with Solaris 2.1 (for
anyone foolish enough to still be running it), 2.2, 2.3, probably 2.4.
"...It is much more stable and better behaved than the Solaris 2.3 ppp
from Sun...." (Larry Williamson <[email protected]>)
There is also a specialized WWW documentFAQ at
http://www.acn.purdue.edu/dp/dp.html.
5.4 Free PPP for MSDOS
5.4.1 WG7J NOS (JNOS) PPP ADDITIONS:
Johan Reinalda (WG7J) did a lot of additions/improvements to the KA9Q
for MSDOS. One of them seems to be that PPP is working, finally. Get
version 1.08 and up.
Authors Phil Karn (KA9Q), Johan Reinalda (WG7J), with
additions from lots of others. PPP code written by
Katie Stevens of UC Davis, based on the original
implementation by Drew Perkins of CMU. Updated by
Bill Simpson and Glenn McGregor of the University
of Michigan. James Dugal (N5KNX) has taken over
development of JNOS.
Features server, client, scripting, redial,
Public FTP sites:
pc.usl.edu:/pub/ham/jnos/ James's local ftp site. This
directory is guaranteed to
have the most recent release
of JNOS.
ftp.ucsd.edu:hamradio/packet/tcpip/incoming
Comment There is a entry in the configuration recipes
section.
5.4.2 PPP PACKET DRIVER INTERFACES
5.4.2.1 etherppp
Ftp archive
ftp.merit.edu:internet.tools/ppp/dos/etherppp.zip
gopher://gopher.archive.umich.edu:7055/11/msdos/c
ommunications/ncsa/etherppp-new.zip.new
Comment 16 Mar 1994 The "NCSAPPP" version of the DOS
PPP packet driver is no longer being distributed
due to the availability of the newer "ETHERPPP"
version of the packet driver. This packet driver
emulates an Ethernet class packet driver and is
thus compatible with a wider range of
applications. The older driver presented only a
"PPP" class packet driver and only worked with
applications which knew specifically of "PPP"
class packet drivers.
-Larry Blunk, Merit Network, Inc. / The University of Michigan
Then ftp to merit.edu (notice: not ftp.merit.edu) and from the
/pub/ppp/dos directory, fetch etherppp.commands.
(The etherppp-new executable will seem to be there
also, but you'll find you can't download it.)
The documentation file in the archive with the executable was written
for a much older version of the software, and is
obsolete in several respects. The /k parameter
apparently is no longer needed in 1.9.49 beta.
And although you can use the supplied version of
TERMIN to unload the driver from memory, it is no
longer necessary. PPP has a /u switch which will
do the same thing.
On the plus side, the dialer works nicely. When the driver is unloaded
from memory, it will automatically hang up the
modem. On the minus side, in addition to random
exception errors and lockups, the thing is a
memory hog. PPP 1.9.49 takes up over 120,000
bytes of memory. That doesn't leave Minuet's
graphical web browser enough room to function
properly. (Runtime error #204 will commonly
appear.)
When fetching news with Minuet 17A and PPP 1.9.49 beta using Merit's
default or "quick" configuration, I frequently
crashed on Exception 13 errors. The following
seems to work better, though not 100 percent
stable--gopher and ftp in 18A sometimes generate
exception errors.
ppp ipcp local compress allow
ppp ipcp open
ppp lcp local accm 0
ppp lcp local acfc on
ppp lcp local pfc on
ppp lcp local magic allow
ppp lcp open
NEIL PARKS <[email protected]>
Very incomplete features
client only
5.4.2.2 PPPPKT
Author Frank Molzahn
ftp directory oak.oakland.edu, in one of the directories, where
packet drivers are found.
comment The product is not a complete packet driver by
itself. It requires some additional files that
are actually part of Novell's commercial
networking products. Fortunately, Novell makes
them available for free download via anonymous
ftp, if you know where to look. Molzahn provides
complete and detailed instructions for finding
and installing them. PPPPKT does not have any kind
of dialer. You have to dial the old-fashioned
way--use a plain term pgm that will establish the
connection and then get out of the way without
hanging up the phone line. (Telix, for example,
does this very nicely.)
Performance is a mixed bag. News (with 17A) and Gopher are very fast.
Mail is so slow that "time out" errors occur
frequently. Increasing the "I/O timeout" and
"retransmit timeout" numbers in Minuet's
Setup/Network screen increases the chances the
mail might go through eventually--but not always.
Telnet is so slow that it appears to lock up.
ftp performance is odd: Logon negotiations and
directory listings are slow, but once you start
to fetch a file it will come roaring in faster
than with any other packet driver I've tried.
PPPPKT takes up less memory than Merit PPP, so
your chances of successfully browsing a graphical
web page are better.
NEIL PARKS <[email protected]>
5.4.3 ISPA - ISDN PACKET DRIVER INTERFACE
Ftp archive ftp.biochem.mpg.de:/pc/isdn
Self-Description " ISPA is an ethernet-type (class=1)
packet-driver for IP-Routing or remote Ethernet
bridging over ISDN. ISPA communicates with the
ISDN card using the Common ISDN API 1.1
specification (a standard defined by German ISDN
card manufacturers and the German Telekom).
Because of this, ISPA is completely hardware
independent and has successfully been tested with
many active or passive ISDN cards.
ISPA supports a large set of protocols for communication with other
vendors ISDN routers or servers. Among these
protocols are: LAPB, Frame-Relay, PPP (including
PAP support), SLIP, Cisco-HDLC.
ISPA was developed for use with PCROUTE as a cheap Ethernet-ISDN Router.
However, it has been succesfully tested with a
wide range of TCP/IP programs e.g. WATTCP based IP
programs, PC-NFS, NCSA & CU -Telnet/ftp, gopher,
popmail, PCTCP 2.2 or Trumpet WINSOCK.
ISPA was written for use with ISDN BRI PC cards. I myself have used ISPA
only with the Teles.S0 card, one of the cheapest
ISDN cards in Germany. But I got responses from
users of ISPA that it will work at least with the
following other ISDN cards: AVM A1, AVM B1, Diehl
SCOM, Diehl SoTec, NICCY 1000 PC, mbp Solis. Many
German vendors of ISDN cards have started to
support besides the German signaling system (1TR6)
and Euro-ISDN (EDSS1) also other signaling systems
in their Common ISDN API 1.1 implementation.
The current version of ISPA supports two independent active connections
at a time. Alternativly a connection can use two
B-channels for loadsharing. ISPA can be loaded
more than once, if more than two simultanous
connections to different sites are desired.
Loadsharing can be configured as static or dynamic
(bandwith on demand). Dynamic loadsharing can be
used concurrently to a second independent
connection.
Loadsharing over two channels is implemented using simple round robin
scheduling, because IP doesn't require the orginal
packet sequence. It's completly hardware
independent. It's works the same way as Cisco
implements loadsharing over to X.21 interfaceses
and I have tested ISPA with a Cisco Router and two
Philips TA's. Sure it will not double the
performance this way, but around 13kBytes/s you
can get."
Herbert Hanewinkel, July 1994
5.5 Free PPP for AmigaOS
5.5.1 AMIGANOS (KA9Q NOS PORT TO AMIGA)
Mailing-list-maintainer
[email protected]
FAQ posting comp.sys.amiga.datacomm, every 21 days
Author [email protected] (John Heaton)
Public ftp archive ftp.demon.co.uk: /pub/amiga/setup/setupv4.lha
419364 bytes (Setup for newcomers;
Note that this contains some information which is
quite
specific for the demon.co.uk site only)
/pub/amiga/anos/anos29k.lha 196742 bytes (if you
already have an
earlier version of setup and just need AmigaNOS
2.9k. Also on
wuarchive.wus
tl.edu:/mirrors3/ka9q/amiga/anos29k.lha
Help File
wuarchive.wustl.edu:/sys
tems/amiga/incoming/text/AmigaNOS-help-V2.lha or
ftp.demon.co.uk:/pub/amiga/setup/AmigaNOS-help-V
2.lha
Comments AmigaNOS2.9k.lha contains PPP as well as SLIP.
Seems to be a
rfc1171 like implementation, enhanced with a
few rfc1331/2
features (like most other implementations I
know of)
5.5.2 PPP.DEVICE FOR SANA2 COMPATIBLE NETWORK PACKAGES
(AS225, AMITCP, ENVOY)
5.5.2.1 Kruse-PPP 1.23 evaluation version.
Author Holger Kruse <[email protected]>
Public FTP archive on Aminet:comm/net; ftp to e.g.
wuarchive.wustl.edu, cd to /pub/aminet and read
the instruction about the nearest mirror to you.
Status Demo-Version, with all configuration options
fixed to their defaults (with the exception of the
IP adresses, of course). For the full version see
7.1.1
Supports IPCP, is reported to work with AmiTCP-3.0, AmiTCP-4.x and
AS225R2, claimed to work with AmiTCP-2.3.
More Information available at
http://www.america.com/~kruse/amiga/PPP.html
5.6 Free PPP for NeXT
5.6.1 OLD NEXT-PPP
Public ftp archive merit.edu:pub/ppp/next-ppp0.3.tar.Z
Author [email protected] (Miron S. Cuperman)
Comment The author claimed: I heard that it doesn't work
with 3.0.
I haven't looked at it myself.
It's just a straight port of ppp-1.1. It works
with NeXTStep
2.1. It is based on the BSD part of ppp-1.1,
but with header
compression integrated. I'm not
currently supporting (or even using) it.
But [email protected] (Dave Strout via
MacPPP and Eudora) claims that:
"I have gotten the next-ppp0.2 to work just
fine under NeXTStep 3.0. I have only tried
MacPPP running against it, but telnet,
eudora, and GopherApp all work fine.
FTP does not work at 2400bps, but does at 9600.
dave."
<[email protected]> told me that:
You state ppp-0.2 as being the latest version for
NeXTSTEP.
It isn't. ppp-0.3 is. However, ppp-0.3 and 0.2
don't run on
NeXTSTEP 3.1 or 3.2 (I believe), and both have
byte-ordering and
byte-alignment problems for White (intel)
hardware.
5.6.2 PPP-2.1.2 NEXT PORT A
Philip Prindeville has released for Beta testing a port of ppp-2.1.2
suitable for use on NextStep 3.2 on Black (Motorola), White (Intel), and
Gray (HP) hardware. It has also been tested with the Mux 1.4 driver (up
to 38400b/s with no lose!).
Initial reports are that it is fairly solid.
N.B.: this is *not* the same implementation as Steve Perkins but rather
an update of Miron Cuperman's ppp-0.3.
It supports all features of 2.1.2 except:
receiver AsyncMaps
MRU negotiation
receiver (asymmetric) A/C compression negotiation
Proxy ARP (server mode)
The code may be freely used by individuals but the copyright forbids
(without prior agreement) commercial use of this software. Simply
stated, Joe Blow can use this software at home, but commercial PPP
providers can not use this software for their exploitation without
written agreement from the authors.
It is available from ftp://ftp.enst.fr/incoming/philipp/ as
ppp-2.1.2-beta.tar.gz and
ftp://ftp.cs.orst.edu/software/NeXT/sources/comm/ppp-2.1.2-beta.tar.gz
(see ppp-2.1.2-beta.README.
There are reports that it is difficult to get it to compile on 3.2, and
after you succeed, it doesn't work, as some system calls are missing.
The reports about it being difficult to compile aren't true. These
people simply haven't read the readme's. It states quite clearly that
under Black (Motorola) 3.2, you need to compile with -DIOLog=printf
since the DriverKit wasn't ported to Black hardware.
Note: PPP-2.1.2 has been obsoleted by PPP-2.2.
Philippe-Andre Prindeville <[email protected]>
5.6.2 PPP-2.2 NEXT PORT
There is a port of PPP-2.2 for NeXTSTEP. Version 2.2 implements BSD
packet compression, VJ header compression, server ability, priority
queueing of interactive packets, and much more. It contains _many_ bug
fixes and enhancements over 2.1.2. This effort is a merge of the code
bases of Philippe-Andre Prindeville/Pete French and Stephen Perkins.
PPP-2.2 is in beta release. The NeXT sources for PPP-2.2 are not
currently bundled with the PPP-2.2 Beta distribution. However, they may
be retrieved from several sites. Both sources and an MAB binary only
installer package are available.
Since the code base is still evolving, we have set up a WWW site that
always has current information on the package. For more information,
please check out http://www.thoughtport.com:8080/PPP/.
If you don't currently have access to a viewer, you may grab a README
through the anonymous FTP service at
ftp.thoughtport.com:/pub/next/ppp/README. This file will have
information on the latest versions.
This package has been tested on Motorola, Intel, Sparc, and HP systems
running OS 3.2 and 3.3. It will not work on OS versions earlier than
3.2. The package works with the standard NeXT supplied serial drivers
as well as the MuXV1.7 driver and the latest NeXT serial drivers (see
NeXTAnswers for details). It also works alongside NXFax.
Note: There are some problems running the latest version on Sparc and
HP architectures that have the actual 3.3 release. It does work on
systems having OS 3.3 Pre-release.
Stephen J. Perkins <[email protected]>
5.7 free PPP for Macintosh
-MacPPP 2.0.1 from Merit Network, Inc. and the University of Michigan
Author [email protected] (Larry Blunk)
Public ftp archive
ftp.merit.edu:internet.tools/ppp/mac/...
Status
macppp2.0.1.hqx seems to be the newest binary
release.
There are also
sources. From the
'Installing MacPPP' document: "...MacPPP 1.1 [as
well as 2.0.1] is a Line Access
Protocol (LAP mdev) driver for MacTCP. This
version does not
support AppleTalk over PPP.
MacPPP requires MacTCP 1.1 or higher, Macintosh
System 6.0.5
or higher, and a Hayes-compatible modem for
dial-in
connections. You can also use MacPPP over
hardwired asynchrounous
connections, ..." Please update your Mac PPP info,
as it is seriously outdated. The current version
of Macppp is 2.2.0a and there is now Freeppp 1.0.2
which is an outgrowth of Macppp 2.1.2sd. Macppp
2.1.2sd and Freeppp 1.0.2 and Macppp 2.1.4 (Apple
Internet Connection Kit) and Freeppp 2.5 are
supposedly the only ones that have a chance of
working with Open Transport and System 7.5.2
[email protected]
Comment There's an entry in the
configuration section above. There are
PostScript and text
installation documents at the ftp site. Although
these
date back to the 1.1.x releases, they're still
useful for
installing MacPPP 2.0.1.
For a workaround for a MacPPP
2.0.1 on non-US System 6, look into the
configuration section, too
newer info, not yet verified by me:
Please update your Mac PPP info, as it is
seriously outdated. The current version of Macppp
is 2.2.0a and there is now Freeppp 1.0.2 which is
an outgrowth of Macppp 2.1.2sd. Macppp 2.1.2sd and
Freeppp 1.0.2 and Macppp 2.1.4 (Apple Internet
Connection Kit) and Freeppp 2.5 are supposedly
the only ones that have a chance of working with
Open Transport and System 7.5.2
[email protected]
5.8 free PPP for Ultrix
ppp-2.1, see above.
5.9 free PPP for Linux
PPP for Linux is distributed as part of Paul Mackerras' ppp package as
of version 2.1.1. It may be obtained from any of the locations which
cary this software, including dcssoft.anu.edu.au:/pub/ppp/. In addition,
the package is posted to the Linux archive sites of sunsite.unc.edu
(U.S.A.) in the directory /pub/Linux/Network and ftp.funet.fi (European)
in the Linux networking directory. The packages on these two sites
contain binaries for the software as well as the source.
pppd-2.1.1.tar.gz kernel files + pppd source and binary
Authors Michael Callahan <[email protected]>
Al Longyear <[email protected]>
public ftp site sunsite.unc.edu and ftp.funet.fi
self-description Version 1.0.0 is meant for use with kernels 1.0.0
and later.
--
--
--
Unsolicited junk e-mail will be proofread at US$50.- per page. By sending
such e-mail to my address, you accept these terms.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |