The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации | XWindow

comp.windows.x: Getting more performance out of X. FAQ

This posting contains a list of suggestions about what you can do to get the best performance out of X on your workstation -- without buying more hardware.
Archive-name: x-faq/speedups
Last-modified: 1998/09/10
URL: http://www.ualberta.ca/~amulder/speedup-x-faq.txt

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
	HOW TO MAXIMIZE THE PERFORMANCE OF X -- monthly posting
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
	    Compiled by Art Mulder ([email protected])

  More RAM, Faster CPU's, More disk space, Faster Ethernet....  These
  are the standard responses you hear when you ask how to improve the
  performance of your workstation.

  Well, more hardware isn't always an option, and I wonder if more
  hardware is always even a necessity.

  This "FAQ" list is a collection of suggestions and ideas from
  different people on the net on how you can the best possible
  performance from X Windows on your workstation, WITHOUT PURCHASING
  MORE HARDWARE.

  Performance is a highly subjective issue.  The individual user must
  balance `speed' versus `features' in order to come to a personal
  decision.  Therefore this document can be be expected to contain many
  subjective opinions in and amongst the objective facts.

  This document is specifically concerned with X.  There are of course
  many other factors that can affect the performance of a workstation.
  However, they are outside the scope of this document.

    [ People seriously interested in the whole area of system
    performance, might want to look at:
    - "System Performance Tuning" by Mike Loukides.  (O'Reilly)
    - "Configuration and Capacity Planning for Solaris Servers"
	by Brian Wong (Prentice Hall)
    - "Sun Performance and Tuning" by A.Cockcroft & R.Petit
	(Prentice Hall)
    Or various other books, too numerous to list here.  -ed]

-----------------
Table of Contents
-----------------
  0. Introduction & Administrivia
  1. Window Managers
  2. The X Server
       Which Server?
       Locking the Server into RAM?
       Starting your Server
       Fonts
       About the Resources File
       Define Your Display Properly
  3. Clients
       A Better Clock for X
       A Better Terminal Emulator for X
       Other Client Comments
       Tuning your client
  4. Miscellaneous Suggestions
       Pretty Pictures
       A Quicker Mouse
       Programming Thoughts
       Backing Store
       Say What!?
*      Network Issues (TCP)
  5. Other Sources of Information
       The "Other X FAQ"
       Books & etc.
  6. Author & Notes
  
! = changed since last issue.
* = new since last issue.

-----------------------------
Introduction & Administrivia
-----------------------------

  This document is posted the first monday of each month, to the
  Usenet news groups comp.windows.x, news.answers, and comp.answers.
  If you are reading a copy of this FAQ which is more than a few
  months old (see the "Last-modified" date above) you should probably
  locate the latest edition, since the information may be outdated.

  If you do not know how to get those newsgroups and/or your site does
  not receive them and/or this article has already expired, you can
  retrieve this FAQ from an archive site.

  There exist several usenet FAQ archive sites.  To find out more about
  them and how to access them, please see the "Introduction to the
  *.answers newsgroups" posting in news.answers.

  The main FAQ archive is at rtfm.mit.edu.  This document can be found
  there in /pub/usenet/news.answers/x-faq/speedups.  If you do not have
  access to anonymous ftp, you can retrieve it by sending a mail
  message to [email protected] with the command "send
  usenet/news.answers/x-faq/speedups" in the message body.

  In addition, this FAQ is available at ftp.x.org (and its mirror
  sites) in /contrib/faqs/speedup-x-faq.  Most X FAQs are there.

---------------
Window Managers
---------------

  There are a lot of window managers out there, with lots of different
  features and abilities.  The choice of which to use is by necessity a
  balancing act between performance and useful features.  Historically,
  "twm" was considered to be a good candidate for a speedy window manager. 

  A couple of generic tricks you can try to soup up your window manger,
  is turning off unnecessary things like "zooming" and "opaque move".
  Also, if you lay out your windows in a tiled manner, you reduce the
  amount of cpu power spent in raising and lowering overlapping
  windows.                           Joe English ([email protected])

  I've found that a good font for tiling is 7x13 (aka:
  -misc-fixed-medium-r-normal--13-100-100-100-c-70-iso8859-1 ). It is
  the biggest font I know of that I can use on my Sun (1152x900 screen)
  and still get two 80 column terminal windows side-by-side on the
  display with no overlap.  Other font suggestions will be accepted.

Suggestions for your consideration:

  I used to recommend fvwm here, but the 2.x man page for fvwm
  now says: "Although it was redesigned to minimize memory consumption,
  it is now as bloated as any other window-manager. Users searching for
  a low-memory consumption window-manager are advised to look elsewhere,
  possibly to an earlier version of fvwm."
		[thanks to: Ian Thurlbeck ([email protected]) ]
 
  You might want to investigate the "Lightweight Window Manager"
  by Elliott Hughes.  http://users.ch.genedata.com/~enh
  It's reported to be quite spartan.  
		[thanks to: [email protected]]

------------ 
The X Server
------------

Which Server?
- - - - - - -
  Make sure that your server is a proper match for your hardware.
  If you have a monochrome monitor, use a monochrome X11 server.

  On my Monochrome Sun, I haven't noticed much difference between
  the Xsun (colour) server and XsunMono, however it was pointed out to
  me that XsunMono is about 800k smaller and therefore should contribute
  to less paging.  
         [ thanks to: Jonny Farringdon ([email protected]),
                        Michael Salmon ([email protected]) ]

  How your server was compiled can also make a difference.  Jeff Law
  ([email protected]) advises us that on a Sun system, X should be
  compiled with gcc (version 2.*) or with the unbundled Sun compiler.
  You can expect to get "*very* large speedups in the server" by not
  using the bundled SunOS compiler.  I assume that similar results
  would occur if you used one of the other high-quality commercial
  compilers on the market.

  Ben Jackson ([email protected]):
    The XFree86 XF86_SVGA server that comes with the binary
    distributions has support for 17 different kinds of SVGA hardware.
    On any single machine installation, support for all but one can be
    removed, drastically reducing the size of the server binary.  This
    is accomplished by installing the LinkKit distribution (available
    from ftp.xfree86.org, or the mirror site where you got the rest of
    the tarballs) and editing the included `site.def' definition of
    XF86SvgaDrivers.  More details are included in the README (installs
    as /usr/X11R6/lib/Server/README).  On my FreeBSD 2.0.5 machine, the
    stock XF86_SVGA is 2.7M.  A cirrus-only version is 1.5M, and took
    less than 5 minutes to build.


Locking the Server into RAM?
- - - - - - - - - - - - - - -
  It was suggested that perhaps hacking the X server so that it would
  stay locked in RAM (and therefore not get paged out) might help
  performances.  eg: via a call to plock().
       [Eric C Claeys ([email protected]), Danny Backx ([email protected]),
	Juan D. Martin ([email protected])]

  Kenny Ranerup [[email protected]] tried this a few years ago and
  confirmed that it does work, and can give a noticeable speedup.  But,
  you must be careful that your server doesn't grow too large (ie,
  close to the size of your RAM).  He also makes the point that slow
  interactive performace is in many cases due to client paging (paging
  in libraries), and not server paging.

Starting your Server
- - - - - - - - - - -
  Joe English ([email protected]) :
    If you start up a lot of clients in your .xsession or whatever, sleep
    for a second or two after launching each one.  After I changed my
    .xclients script to do this, logging in actually took *less* time...
    we have a heavily loaded system without much core, though.

  This sounds crazy, but I have confirmed that it works!  

  Warner Losh ([email protected]) provided me with a good
  explanation of why this works, which I have summarized here:

    When you start up an X server it takes a huge amount of time to
    start accepting connections.  A lot of initialization is done by
    the server when it starts.  This process touches a large number of
    pages.  Any other process running at the same time would fight the
    server for use of the CPU, and more importantly, memory.  If you
    put a sleep in there, you give the Server a chance to get itself
    sorted out before the clients start up.

    Similarly, there is also a lot of initialization whenever an X
    client program starts: toolkits registering widgets, resources
    being fetched, programs initializing state and "databases" and so
    forth.  All this activity is typically memory intensive.  Once this
    initialization is done ("The process has reached a steady state"),
    the memory usage typically settles down to using only a few pages.
    By using sleeps to stagger the launching of your clients in your
    .Xinitrc , you avoid them fighting each other for your
    workstation's limited resources

  This is most definitely a "Your Mileage May Vary" situation, as there
  are so many variables to be considered: available RAM, local swap
  space, load average, number of users on your system, which clients
  you are starting, etc.

  Currently in my .xinitrc I have a situation like:
	(sleep 1; exec xclock ) &
	(sleep 1; exec xbiff ) &
	(sleep 1; exec xterm ) &
	(sleep 1; exec xterm ) &

  I've experimented with:
	(sleep 1; exec xclock ) &
	(sleep 2; exec xbiff ) &
	(sleep 3; exec xterm ) &
	(sleep 4; exec xterm ) &

  I've even tried:
	(sleep 2; exec start_X_clients_script ) &
  and then in start_X_clients_script I had:
	(sleep 1; exec xclock ) &
	(sleep 1; exec xbiff ) &
	(sleep 1; exec xterm ) &
	(sleep 1; exec xterm ) &

    [ The idea with this last one was to make sure that xinit had
    completely finished processing my .xinitrc, and had settled down
    into a "steady state" before the sleep expired and all my clients
    were launched. ]

  All of these yielded fairly comparable results, and so I just stuck
  with my current setup, for its simplicity.  You will probably have to
  experiment a bit to find a setup which suits you.

  Theo Honohan <[email protected]> suggests that you might
  want to investigate 'xtoolwait'  (which can be found at
  ftp.x.org/contrib/utilities/xtoolwait-1.1.tar.gz) which does
  similar pacing of X startup.

Fonts
- - -
  Loading fonts takes time and RAM.  If you minimize the number of fonts
  your applications use, you'll get speed increases in load-up time.

  One simple strategy is to choose a small number of fonts (one small,
  one large, one roman, whatever suits you) and configure all your
  clients -- or at least all your heavily used clients -- to use only
  those few fonts.  Client programs should start up quicker if their
  font is already loaded into the server.  This will also conserve
  server resources, since fewer fonts will be loaded by the server.
			      [ Farrell McKay ([email protected]),
			        Joe English ([email protected]) ]

  eg: My main xterm font is 7x13, so I also have twm set up to use 7x13
  in all its menus and icons etc.  Twm's default font is 8x13.  Since
  I don't normally use 8x13, I've eliminated one font from my server.

  Oliver Jones ([email protected]):
    Keep fonts local to the workstation, rather than loading them over nfs.
    If you will make extensive use of R5 scalable fonts, use a font server.

  Anthony Stuckey ([email protected]):
    This is particularly good advice on Linux.  Linux has a problem
    with non-floating-point capable hardware (486SX's, etc) in that
    they will freeze for up to a few minutes while the Scalable fonts
    are created... The font server fixes this to a certain extent, as
    does removing the scalable fonts from your font path. ... I believe
    that a writeup of this problem is in the Linux Tips FAQ

    [The main point here is that non-fpu machines, linux or otherwise,
    should experience a benefit from running a font server.]

About the Resources File
- - - - - - - - - - - - -

    Keep your .Xresources / .Xdefaults file small.  Saves RAM and saves
    on server startup time.          Joe English ([email protected])

  One suggestion:

    In your .Xresources file, try putting only the minimum number of
    resources that you want to have available to all of your
    applications.  For example:  *reverseVideo: true

    Then, separate your resources into individual client-specific
    resource files.  For example: $HOME/lib/app-defaults.  In your
    .login file set the environment variable XUSERFILESEARCHPATH:

	setenv XUSERFILESEARCHPATH $HOME/lib/app-defaults/%N

    (Note:  It is easier and quicker for Xt to process
    XUSERFILESEARCHPATH than XAPPLRESDIR.)

    [ The "comp.windows.x Frequently Asked Questions" FAQ contains
    an excellent explanation of how this and the other main X
    environment variables work.  --ed.]

    So, when xterm launches, it loads (through Xt) its resources from
    .../app-defaults/XTerm.  Xdvi finds them in .../app-defaults/XDvi,
    and so on and so forth.  Note that not all clients follow the same
    XXxxx resource-file naming pattern.  You can check in your system
    app-defaults directory (often: /usr/X11R5/lib/X11/app-defaults/) to
    find the proper name, and then name your personal resource files
    with the same name.

    This is all documented in the Xt Specification (pg 125 & 666).
		    [Thanks to: Kevin Samborn ([email protected]),
		         Michael Urban ([email protected]),
			 Tom Bagli ([email protected]),
		             and Mike Long ([email protected]).
	     Kevin is willing mail his setup files to inquirers.]

  This method of organizing your personal resources has the following
  benefits:

    - Easier to maintain / more usable.

    - Fewer resources are stored in the X server in the RESOURCE_MANAGER
      property.  As a side benefit your server may start fractionally
      quicker, since it doesn`t have to load all your resources.

    - Applications only process their own resources, never have to sort
      through all of your resources to find the ones that affect them.

  It also has drawbacks:

    - the application that you are interested in has to load an
      additional file every time it starts up.  This doesn't seem to
      make that much of a performance difference, and you might
      consider this a huge boon to usability.  If you are modifying an
      application's resource database, you just need to re-run the
      application without having to "xrdb" again.

    - xrdb will by default run your .Xresources file through cpp.  When
      your resources are split out into multiple resource files and
      then loaded by the individual client programs, they will not.
      WATCH OUT FOR THIS!!

      I had C style comments in my .Xresources file, which cpp stripped
      out.  When I switched to this method of distributed resource
      files I spent several frustrating days trying to figure out why
      my clients were not finding their resources.  Xt did *NOT*
      provide any error message when it encountered the C style
      comments in the resource files, it simply, silently, aborted
      processing the resource file.

      The loss of preprocessing (which can be very handy, e.g. ``#ifdef
      COLOR'' ...) is enough to cause some people to dismiss this
      method of resource management.

    - You may also run into some clients which "break the rules".  For
      example, neither Emacs (18.58.3) nor Xvt (1.0) will find their
      resources if they are anywhere other than in .Xresources.

      This is because emacs (and presumably, Xvt) are not Xt based
      applications.  They are coded to use Xlib directly.
      XUSERFILESEARCHPATH and XAPPLRESDIR are Xt features.
			     Larry Williamson ([email protected])

    - when starting up a client on a machine that does not share files
      with the machine where your resources are stored, your client
      will not find its resources.  Loading all your resources into the
      server will guarantee that all of your clients will always find
      their resources.            Casey Leedom ([email protected])

  A possible compromise that I have tried, is to put resources for all
  my heavily used clients (eg: xterm) into my .Xresources file, and to
  use the "separate resources files" method for clients that I seldom
  use.

Define Your Display Properly
- - - - - - - - - - - - - - -

  Client programs are often executed on the same machine as the
  server.  In that situation, rather than setting your DISPLAY
  environment variable to "<hostname>:0.0", where <hostname> is the
  name of your workstation, you should set your DISPLAY variable to
  "unix:0.0" or ":0.0".  By doing this you access optimized routines
  that know that the server is on the same machine and use a shared
  memory method of transferring requests.
			[thanks to Patrick J Horgan ([email protected])]

  See the _DISPLAY NAMES_ section of the X(1) man page for further
  explanation of how to properly set your display name.

  "I don't think it's stock MIT, but (at least) Data General and HP
  have libraries that are smart enough to use local communication even
  when the DISPLAY isn't set specially."
			      Rob Sartin ([email protected])

  [Jody Goldberg ([email protected]) sent me an Xlib patch to
  change stock R5 to use local communication even if DISPLAY is not
  properly set.  I don't want to get in the business of distributing or
  trying to juggle non-MIT patches and so have elected not to include
  it here.  Hopefully MIT will apply this minor (~8 lines) patch
  themselves.  In the meantime, if you want to try it yourself, email
  Jody.  --ed.]

-------
Clients
-------

  If you only have a few megabytes of Ram then you should think
  carefully about the number of programs you are running.  Think also
  about the _kind_ of programs you are running.  For example:  Is there
  a smaller clock program than xclock?

  Unfortunately, I haven't really noticed that programs advertise how
  large they are, so the onus is on us to do the research and spread
  the word.

  [ Suggestions on better alternatives to the some of the standard
  clients (eg: Xclock, Xterm, Xbiff) are welcome.  --ed.]

  I've received some contradictory advice from people, on the subject
  of X client programs.  Some advocate the use of programs that are
  strictly Xlib based, since Xt, Xaw and other toolkits are rather
  large.  Others warn us that other applications which you are using
  may have already loaded up one or more of these shared libraries.  In
  this case, using a non-Xt (for example) client program may actually
  _increase_ the amount of RAM consumed.

  The upshot of all this seems to be: Don't mix toolkits.  That is, try
  and use just Athena clients, or just Xview clients (or just Motif
  clients, etc).  If you use more than one, then you're dragging in
  more than one toolkit library.

  Know your environment, and think carefully about which client
  programs would work best together in that environment.

		[Thanks to: Rob Sartin ([email protected]),
    Duncan Sinclair ([email protected] | [email protected]) ]

A Better Clock for X
- - - - - - - - - - -

1) xcuckoo
   suggested by: Duncan Sinclair ([email protected])
   available: on export.lcs.mit.edu

   Xcuckoo displays a clock in the title bar of *another* program.
   Saves screen real estate.

2) Swisswatch
   suggested by: Theo Honohan <[email protected]
   ftp://sunsite.doc.ic.ac.uk/packages/X11/R5contrib/swisswatch-0.06.tar.Z


  Of course, the ultimate clock --- one that consumes no resources, and 
  takes up no screen real estate --- is the one that hangs on your wall.
  :-) 

A Better Terminal Emulator for X
- - - - - - - - - - - - - - - - -

  From the README file distributed with xterm:

  +-----
  |		 Abandon All Hope, Ye Who Enter Here
  |
  | This is undoubtedly the most ugly program in the distribution.
  | ...
  +-----

  Ugly maybe, but at my site it's still the most used.  I suspect that
  xterm is one of the most used clients at many, if not most sites.
  Laziness?  Isn't there a better terminal emulator available?  See
  below.

  If you must use xterm, you can try reducing the number of saveLines
  to reduce memory usage.  [ Oliver Jones ([email protected]),
		   Jonny Farringdon ([email protected]) ]

1) Xvt
   Suggested by: Richard Hesketh ([email protected])
   Author: John D. Bovey ([email protected])
   Available: http://unix.hensa.ac.uk/pub/misc/unix/xvt

   [From the README file] "Xvt is an X terminal-emulator that is
   designed to be more or less compatible with xterm while using much
   less swap space.  It is mainly intended for use at sites which use
   large numbers of X terminals but may also be useful on single
   workstations that are short of memory.  On a [SunOS 4.1.* Sparc], an
   initially invoked xvt uses about 1/3 megabyte of swap while xterm
   uses about 1.3 megabytes (obtained by running pstat rather than ps
   which seems to give unreliable size figures on SPARCs).  The main
   way that xvt achieves its small size is by avoiding the use of the X
   toolkit."

   There have been some conflicting opinions aired over xvt vs. xterm.
   Different sites with different needs will likely have to do
   their own evaluation.  Caveat Emptor, your mileage may vary.

2) rxvt
   Available: http://babayaga.math.fu-berlin.de:80/~rxvt/
     
   Originally a stripped down Linux port of xvt, with some 
   minor modifications, it's now being actively developed
   on it's own.
	[thanks to: Theo Honohan <[email protected] for the update]


Other Client Comments
- - - - - - - - - - -
  When using the xlock screen locking client, the "qix" mode is
  much more lightweight than the default mode.  
				 [Q. Alex Zhao ([email protected])]

  I can confirm the previous report from personal experience  here.  In
  a lab full of ~20 sun 3/80's all running the Xkernel software, the
  subnet was getting regularly clobbered.  This was tracked down to
  students running xlock.  Since these machines are all xterminals, the
  actual xlock program runs remotely, and generates a scary amount of
  network traffic to draw the default 'swarm' pictures on the screen.
  We have removed this program and replaced it with a much simpler
  screen locking program which simply blanks the screen.        [ed.]

  A suggestion: xtrlock, by Ian Jackson ([email protected])
  It is very small (about 16k running), and doesn't produce any traffic
  while locked. Drawback: It doesn't make your screen invisible.
			  [ Klamer Schutte ([email protected]) ]

  An improved xbiff: Xbuffy.  It can watch multiple mailboxes and can
  do a pop up showing the From and Subject line of incoming mail.
  Xbiff doesn't eat much memory and Xbuffy tends to be about the same
  (on the RS/6000, xbuffy tends use just a little less memory).  It is
  in the contrib directory on ftp.x.org.
                               [ Bill Pemberton ([email protected]) ]

Tuning your client
- - - - - - - - - -

  Suggestions on how you can tune your client programs to work faster.

  From Scott Barman ([email protected]) comes a suggestion regarding Motif
  Text Field Widgets:

    I noticed that during data entry into Motif text field widgets, I
    was getting a slight lag in response to some keystrokes,
    particularly the initial one in the field.  Examining the what was
    going on with xscope I found it.  It seems that when the resource
    XmNblinkRate is non-zero and the focus is on a text field widget
    (or even just a text widget) the I-beam cursor will blink.  Every
    time the cursor appears or disappears in those widgets, the widget
    code is making a request to the server (CopyArea).  The user can
    stop this by setting the resource XmNblinkRate to 0.  It is not
    noticeable on a 40MHz SPARC, but it does make a little difference
    on a [slower system].

  This specific suggestion can probably be applied in general to lots
  of areas.  Consider your heavily used clients, are there any minor
  embellishments that can be turned off and thereby save on Server
  requests?

-------------------------
Miscellaneous Suggestions
-------------------------

Pretty Pictures
- - - - - - - -
  Don't use large bitmaps (GIF's, etc) as root window backgrounds.

  - The more complicated your root window bitmap, the slower the server
    is at redrawing your screen when you reposition windows (or redraw,
    etc)

  - These take up RAM, and CPU power.  I work on a Sun SPARC and I'm
    conscious of performance issues, I can't comprehend it when I see
    people with a 4mb Sun 3/60 running xphoon as their root window.

    I'll let someone else figure out how much RAM would be occupied by
    having a full screen root image on a colour workstation.

  - If you're anything like me, you need all the screen real estate
    that you can get for clients, and so rarely see the root window
    anyway.

		      [ Thanks to Qiang Alex Zhao ([email protected]) 
			for reminding me of this one. --ed.]

A Quicker Mouse
- - - - - - - -
  Using xset, you can adjust how fast your pointer moves on the screen
  when you move your mouse.  I use "xset m 3 10" in my .xinitrc file,
  which lets me send my pointer across the screen with just a flick of
  the wrist.  See the xset man page for further ideas and information.

  Hint: sometimes you may want to *slow down* your mouse tracking for
  fine work.  To cover my options, I have placed a number of different
  mouse setting commands into a menu in my window manager.  

  e.g. (for twm) :
      menu "mouse settings" {
        "Mouse Settings:"			f.title
	"  Very Fast"				! "xset m 7 10 &"
	"  Normal (Fast)"			! "xset m 3 10 &"
	"  System Default (Un-Accelerated)"	! "xset m default &"
	"  Glacial"				! "xset m 0 10 &"
      }

Programming Thoughts
- - - - - - - - - - -
  Joe English ([email protected]) :
    To speed up applications that you're developing, there are tons of
    things you can do.  Some that stick out:

    - For Motif programs, don't set XmFontList resources for individual
      buttons, labels, lists, et. al.; use the defaultFontList or
      labelFontList or whatever resource of the highest-level manager
      widget.  Again, stick to as few fonts as possible.

    - Better yet, don't use Motif at all.  It's an absolute pig.

    - Don't create and destroy widgets on the fly.  Try to reuse them.
      (This will avoid many problems with buggy toolkits, too.)

    - Use a line width of 0 in GCs.  On some servers this makes a HUGE
      difference.

    - Compress and collapse multiple Expose events.  This can make the
      difference between a fast application and a completely unusable
      one.

  Francois Staes ([email protected]) :
    Just a small remark: I once heard that using a better malloc
    function would greatly increase performance of Xt based
    applications since they use malloc heavily. They suggested trying
    out the GNUY malloc, but I didn't find the time yet. I did some
    tests on small programs just doing malloc and free, and the
    differences were indeed very noticeable ( somewhat 5 times faster)

  [ Any confirmation on this from anyone?  --ed.]

  Andre' Beck ([email protected]) :

  - Unnecessary NoExpose Events.

    Most people use XCopyArea/XCopyPlane as fastest blit routines, but
    they forget to reset graphics_exposures in the GC used for the
    blits. This will cause a NoExpose Event every blit, that, in most
    cases, only puts load onto the connection and forces the client to
    run through its event-loop again and again.

  - Thousands of XChangeGC requests.

    This "Gfx Context Switching" is also seen in most handcoded X-Apps,
    where only one or few GCs are created and then heavily changed
    again and again.  Xt uses a definitely better mechanism, by caching
    and sharing a lot of GCs with all needed parameters. This will
    remove the load of subsequent XChangeGC requests from the
    connection (by moving it toward the client startup phase).

Backing Store
- - - - - - -
 Joe Nardelli ([email protected]) :
   I've found that using 'backing store' really speeds up redrawing of
   complex windows.  Ex: I have a window that stores an intricate 3-D
   sceen, and redrawing it every time a window pops up in front is a
   real waste of time.  It is much quicker to set the 'backing store'
   attribute to either 'Always' or 'WhenMapped'. ...  Note that the
   server keeps a copy of the window in memory, so very simple windows
   may actually slow some systems done.  Your mileage may vary.

 Here is another way of looking at the issue of backing store.
 If you are low on memory, you should disable backing store, since a
 redraw will be quicker than pulling the saved image from swap space.
 (We are assuming here that you are sufficiently low on memory that
 your backing store ends up in swap space)  If you have enough memory,
 backing store will beat redraw all the time -- unless you have _very_
 fast hardware.
	    [from discussions with Nicolai Langfeldt ([email protected]) ]

Say What!?
- - - - - - 
  Some contributors proposed ideas that seem right off the wall at first:

  David B. Lewis (by day: [email protected], by night: david%[email protected]) :
    How about this: swap displays with someone else. Run all your
    programs on the other machine and display locally; the other user
    runs off your machine onto the other display. Goal: reduce context
    switches in the same operation between client and server.

  I'm not in a situation where I can easily try this, but I have
  received the following confirmation...

  Michael Salmon ([email protected]):
    I regularly run programs on other machines and I notice a big
    difference. I try to run on a machine where I will reduce net usage
    and usually with nice to reduce the impact of my intrusion. This
    helps a lot on my poor little SS1+ with only 16 MB, it was
    essential when I only had 8 MB.

  Casey Leedom ([email protected]) :
    [The X11 Server and the client are] competing for the same CPU as
    your server when you run it on the same machine.  Not really a
    major problem, except that the X11 client and the server are in
    absolute synchronicity and are context thrashing.

  Timothy H Panton ([email protected]) :
    Firstly it relies on the fact that most CPU's are mostly idle, X's
    cpu usage is bursty.  so the chances of you and your teammate
    doing something cpu-intensive at the same time is small. If they
    are not then you get twice the cpu+memory available for your
    action.

    The second factor is that context switches are expensive, using 2
    cpu's halves them, you pay a price due to the overhead of going
    over the network, but this is offset in most cases by the improved
    buffering of a network (typically 20k vs 4k for a pipe), allowing
    even fewer context switches.

Network Issues (TCP)
- - - - - - - - - - -

  It is questionable whether the following belongs in this FAQ, since
  it seems to mostly be a question of network performances.  But here
  it is:

  Bob Arendt ([email protected]) :

    It turns out that matching TCP sendspace and recvspace on client
    and server can dramatically affect performance.  Sun/UNIX and
    TCPware/VMS default to 4Kbyte buffer sizes (out-of-the-box).
    Ultrix/DEC and DigitalUnix/DEC default to 32Kbyte buffer sizes.
    Using the same workstation hardware and FDDI network connections
    I got the following stats:

    x11perf -putImage100  (run on TCPware/VMS client, default 4K)
	 = 4.5 msec  with TCPware/VMS server, default 4K
	 = 600 msec  with Ultrix/VMS server, default 32K
 	 = 600 msec  with DigitalUnix server, default 32k

    Changing the Ultrix config and DigitalUnix kernal to 4K TCP
    send/recv sizes resulted in matching speeds of 4.5 msec.  In this
    case, less was more :-)

    X11 must use system TCP default buffer settings.  With a
    mismatched, large recvs pace, it appears that polling mechanism
    (ala select()?)  empties the buffers rather than triggering on
    buffer-full.  Matching to small buffers is probably better than
    larger buffers since it tends to reduce latency and most network
    devices break up traffic into smaller chunks anyway.

    This also appears to be an issue for Windows/X11 servers.
    Running windowsNT on the same Dec Alpha with a third-party X11
    server I see the same dismal response times.  I suspect it's the
    same problem (in conjuncution with X11->winDoze translation delay).
    Don't know how to tune windowsNT though.


----------------------------
Other Sources of Information
----------------------------

The "Other X FAQ"
- - - - - - - - -

  David B. Lewis (faq%[email protected]) maintains the informative and
  well written "comp.windows.x Frequently Asked Questions" document.
  Its focus is on general X information, while this FAQ concentrates
  on performance.

  The comp.windows.x FAQ does address the issue of speed, but only with
  regards to the X server.  The gist of that topic seems to be:
	"Use X11R5, it is faster than R4".
  (Please see the X FAQ for complete details).

Books & etc.
- - - - - - -

  Volume 8 in O'Reilly's X Window System Series; ``X Window System
  Administrator's Guide'' is a book that all X administrator's should
  read.  (email your snailmail address to [email protected] for a catalog)

  Adrian Nye ([email protected]):
    A lot more tips on performance are in the paper "Improving X
    Application Performance" by Chris D. Peterson and Sharon Chang, in
    Issue 3 of The X Resource.

    An earlier version of this paper appeared in the Xhibition 1992
    conference proceedings.

    This paper is absolutely essential reading for X programmers.
  [For information on The X Resource, contact [email protected] --ed.]

  Sajee Mathew ([email protected])
    "Motif Debugging and Performance Tuning" by Doug Young, Prentice
    Hall, 1994.  Good book.  The section on performance tuning presents
    some useful techniques for speeding up X programs from the X-lib
    and toolkit levels.

--------------
Author & Notes
--------------
  This list is currently maintained by Art Mulder (art.mulder @ ualberta.ca)

  Suggestions, corrections, or submission for inclusion in this list
  are gladly accepted.  Layout suggestions and comments (spelling
  mistak's too! :-) are also welcome.

  Currently I have listed all contributors of the various comments and
  suggestions.  If you do not want to be credited, please tell me.

  speedup-x-faq is copyright (c) 1993-96 by Arthur E. Mulder

  You may copy this document in whole or in part as long as you don't
  try to make money off it, or pretend that you wrote it.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLEASE NOTE: The reply address in the headers is bogus.  I regret this
action, but it is necessary to ATTEMPT to defeat Junk Email robots. 

-- 
...art mulder ( [email protected] )( http://www.ualberta.ca/~amulder/ )
              ( Sys Admin / Support Analyst, Network Resources )
              ( Computing and Network Services, U of Alberta, Edmonton )



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру