Партнёры:
Хостинг:
Archive-name: lisp-faq/part4
Last-Modified: Fri Mar 14 11:41:35 1997 by Mark Kantrowitz
Version: 1.61
Maintainer: Mark Kantrowitz and Barry Margolin <[email protected]>
URL: http://www.cs.cmu.edu/Web/Groups/AI/html/faqs/lang/lisp/top.html
Size: 68923 bytes, 1314 lines
;;; ****************************************************************
;;; Answers to Frequently Asked Questions about Lisp ***************
;;; ****************************************************************
;;; lisp_4.faq
This post contains Part 4 of the Lisp FAQ.
If you think of questions that are appropriate for this FAQ, or would
like to improve an answer, please send email to us at [email protected].
Lisp/Scheme Implementations and Mailing Lists (Part 4):
[4-0] Free Common Lisp implementations.
[4-1] Commercial Common Lisp implementations.
[4-1a] Lisp to C translators
[4-2] Scheme Implementations
[4-4] Free Implementations of Other Lisp Dialects
[4-5] Commercial Implementations of Other Lisp Dialects
[4-6] What is Dylan?
[4-7] What is Pearl Common Lisp?
[4-9] What Lisp-related discussion groups and mailing lists exist?
[4-10] ANSI Common Lisp -- Where can I get a copy of the draft standard?
Search for \[#\] to get to question number # quickly.
----------------------------------------------------------------
Subject: [4-0] Free Common Lisp implementations.
Repositories of Lisp source code are described in the answer to
question [6-1].
Remember, when ftping compressed or compacted files (.Z, .arc, .fit,
etc.) to use binary mode for retrieving the files.
The Allegro CL 3.0 Web Version for Windows is a full functional free
version of our Dynamic Object Oriented Programming Development System
for ANSI standard CLOS, with some limitations*. This version includes
an in-core native 32-bit compiler, a drag & drop Interface Builder,
full debugging and development tools and an editor. We sell a supported
version of this software, Allegro CL for Windows, without these
limitations. For more information, call 1-800-3-CLOS-NOW or
1-510-548-3600, fax 1-510-548-8253, or send email to [email protected].
Franz's web page is located at the URL
http://www.franz.com/
Suggestions and bug reports should be sent to [email protected]. Since
this software is unsupported, they may not get back to you, but the
input is still welcome.
* The limitations are: limited heap size, no foreign function support,
missing compile-file, missing disassembler and missing save-image.
The documentation fully explains these capabilities.
CLiCC (Common Lisp to C Compiler) generates C-executables from Common
Lisp application programs. CLiCC is not a Common Lisp system, and
hence does not include any program development or debugging support.
CLiCC is intended to be used as an add-on to existing Common Lisp
systems for generating portable applications. (CLiCC has been tested
in Allegro CL, Lucid CL, CMU CL, CLISP, and AKCL. It should run in any
CLtL1 lisp with CLOS.) CLiCC supports CL_0, a subset of Common Lisp +
CLOS, which excludes EVAL and related functions. At present CL_0 is
based on CLtL1, but is headed towards CLtL2 and ANSI-CL. The generated
C code (ANSI-C or K&R-C compatible) may be compiled using a
conventional C compiler on the target machine, and must be linked with
the CLiCC runtime library in order to generate executables. CLiCC has
a foreign function interface. CLiCC is available by anonymous ftp from
ftp.informatik.uni-kiel.de:/pub/kiel/apply/clicc-0.6.4.tar.gz
[134.245.15.114].
CLiCC was developed by Wolfgang Goerigk <[email protected]>,
Ulrich Hoffman <[email protected]>, and Heinz Knutzen
<[email protected]> of Christian-Albrechts-Universitaet zu
Kiel, Institut fuer Informatik und Praktische Mathematik,
Preusserstr. 1-9, D-24105 Kiel, Germany. The authors welcome
suggestions and improvements and would appreciate receiving email
even if you just used CLiCC successfully. For more information,
send mail to [email protected].
CLISP is a Common Lisp (CLtL1 + parts of CLtL2) implementation by
Bruno Haible of Karlsruhe University and Michael Stoll of Munich
University, both in Germany. It runs on microcomputers (DOS, OS/2,
Atari ST, Amiga 500-4000) as well as on Unix workstations (Linux, Sun4,
Sun386, HP9000/800, SGI, Sun3 and others) and needs only 1.5 MB of RAM.
It is free software and may be distributed under the terms of GNU GPL.
German and English versions are available, French coming soon. CLISP
includes an interpreter, a compiler, a subset of CLOS (e.g., no MOP)
and, for some machines, a screen editor. Packages running in CLISP
include PCL and, on Unix machines, CLX and Garnet. Available by anonymous
ftp from
ma2s2.mathematik.uni-karlsruhe.de:/pub/lisp/clisp/ [129.13.115.2]
For more information, contact [email protected].
There is a mailing list for users of CLISP. It is the proper forum for
questions about CLISP, installation problems, bug reports, application
packages etc. For information about the list and how to subscribe,
send mail to [email protected], with the two lines
help
information clisp-list
in the message body.
A Sybase SQL interface interface for CLIPS is available
by anonymous ftp from wuarchive.wustl.edu:packages/clips2sybase/. For
more information, write to Sherry Steib <[email protected]>.
CMU Common Lisp (CMU CL) is free, and runs on HPs, Sparcs (Mach,
SunOs, and Solaris), DecStation 3100 (Mach), SGI MIPS (Iris), DEC
Alpha/OSF1, IBM RT (Mach) and requires 16mb RAM, 25mb disk. It
includes an incremental compiler, Hemlock emacs-style editor,
source-code level debugger, code profiler and is mostly X3J13
compatible, including the new loop macro. It is available by
anonymous ftp from
ftp.cs.cmu.edu:/afs/cs.cmu.edu/project/clisp/release [128.2.206.173]
Login with username "anonymous" and "userid@host" (your email
address) as password. Due to security restrictions on anonymous ftps
(some of the superior directories on the path are protected against
outside access), it is important to "cd" to the source directory with
a single command. Don't forget to put the ftp into binary mode before
using "get" to obtain the compressed/tarred files. The binary releases
are contained in files of the form
<version>-<machine>_<os>.tar.Z
Other files in this directory of possible interest are
17f-source.tar.gz, which contains all the ".lisp" source files
used to build version 17f. A listing of the current contents of the
release area is in the file FILES. You may also use "dir" or "ls" to
see what is available. Bug reports should be sent to [email protected].
ECoLisp is a Common Lisp implementation which compiles Lisp functions
into C functions that use the C stack and standard procedure call
conventions. This lets Lisp and C code be easily mixed. It can be used
as a C library from any C application. It is available by anonymous
ftp from
ftp.di.unipi.it:/pub/lang/lisp/ [131.114.4.36]
ftp.icsi.berkeley.edu:/pub/ai/ecl/ [128.32.201.7]
as the file ecl-??.tar.gz where ?? is the version number. This is an alpha
release. So far it has been tested on Sun workstations (SunOS 4.x),
SGI (IRIX 4.x), and IBM PC (DOS/go32). For more information, please contact
Giuseppe Attardi <[email protected]> or <[email protected]>.
GNU Common Lisp (GCL) is a free implementation of Common Lisp (CLtL1)
based originally on Austin Kyoto Common Lisp (AKCL). Versions 1.0
and above of GCL (aka versions 1-625 and above of AKCL) are
available under the GNU General Public Library License v2.0, and no
longer require the kcl.tar file to build the system. For
information on previous versions of AKCL, see the KCL entry. GCL
generates C code which it compiles with the local optimizing C
compiler (e.g., GCC). It is intended to eventually support the
ANSI standard for Common Lisp. GCL runs on Sparc, IBM RT, RS/6000,
DecStation 3100, hp300, hp800, Macintosh (under A/UX), mp386,
IBM PS2, IBM RT_AIX, Silicon Graphics 4d, Sun3, Sun4, Sequent
Symmetry, IBM 370, NeXT, Vax, and IBM PC 386/486 (linux, bsd).
GCL version 1.0 and above are available by anonymous ftp from
ftp.cli.com:/pub/gcl/ [192.31.85.129]
math.utexas.edu:/pub/gcl/ [128.83.133.215]
as the file gcl-X.X.tgz (e.g., gcl-2.1.tgz), where X.X should be
replaced with the version number; you'll generally want the largest
version number. The bandwidth to math.utexas.edu is higher than cli.
The file pcl-gcl-1.0.tgz contains a port of PCL (CLOS) to GCL.
The file xgcl-2.tgz contains an interface to X Windows for GCL,
including a low-level interface to Xlib, and in addition to being
available from the above sites, is also available from
ftp.cs.utexas.edu:/pub/novak/xgcl/
http://www.cs.utexas.edu/users/novak/
For more information, write to William Schelter <[email protected]>
(or <[email protected]>, <[email protected]>). GCL is under
continuing development, and folks interested in helping should send
him email. Andy Wang <[email protected]> has compiled GCL 1.0
for Linux 1.1.50 (using gcc 2.5.8 and libc 4.5.26) and made the
resulting binaries available by anonymous ftp from
sunsite.unc.edu:/pub/Linux/Incoming/gcl-1.0.bin.tgz
Kyoto Common Lisp (KCL) is free, but requires a license. Conforms to CLtL1.
KCL was written by T. Yuasa <[email protected]> and M. Hagiya
<[email protected]> at Kyoto University in 1984. Austin
Kyoto Common Lisp (AKCL) is a collection of ports, bug fixes and
improvements to KCL by Bill Schelter (<[email protected]> or
<[email protected]>). Since 1994, AKCL versions 1-625 and
higher are covered by the GNU GPL, so generally one will generally
not need KCL (see GCL above for details). {A}KCL generates C code
which it compiles with the local C compiler. Both are available by
anonymous ftp from
rascal.ics.utexas.edu:/pub/ [128.83.138.20]
ftp.cli.com:/pub/ [192.31.85.1]
utsun.s.u-tokyo.ac.JP:/pub/ [133.11.11.11]
KCL is in the file kcl.tar, and AKCL is in the file akcl-xxx.tar.Z
(take the highest value of xxx). To obtain KCL, one must first sign
and mail a copy of the license agreement to: Special Interest Group in
LISP, c/o Taiichi Yuasa, Department of Computer Science, Toyohashi
University of Technology, Toyohashi 441, JAPAN. Runs on Sparc, IBM RT,
RS/6000, DecStation 3100, hp300, hp800, Macintosh (under A/UX),
mp386, IBM PS2, Silicon Graphics 4d, Sun3, Sun4, Sequent Symmetry, IBM
370, NeXT and Vax. For the beta test version of the DOS port, see
the files akclexe.zip and go32sexe.zip in
math.utexas.edu:/pub/msdos/akcl-beta/
Commercial versions of {A}KCL are available from Austin Code Works,
11100 Leafwood Lane, Austin, TX 78750-3409, Tel. 512-258-0785, Fax
512-258-1342, E-mail [email protected], including a CLOS for AKCL.
See also Ibuki, below.
PowerLisp is a Common Lisp development environment for the Macintosh.
It consists of a Common Lisp interpreter, native-code 680x0 compiler,
680x0 macro assembler, disassembler, incremental linker and
multi-window text editor. It requires a Macintosh with at least a
68020 processor (any Mac except a Plus, SE or Classic) and system 7.0
or later. About 2 megabytes of RAM are required to run it, and to do
much with it you need more like 5 or 6 megabytes. Like any Common Lisp
system, the more memory the better. PowerLisp has the ability to run
in the background. While executing a Common Lisp program, the user may
switch to another application as it continues to run. You can also
edit programs while a Common Lisp program is running. PowerLisp is
targeted to be compatible with CTLTL2 without CLOS (for now) but some
Common Lisp functions are not yet implemented. Upcoming versions
should include the remaining language features. The current released
version is 1.10. PowerLisp is available from America Online and Genie as a
shareware program ($50). It is also available from the Lisp
Repository, as
ftp.cs.cmu.edu:/user/ai/lang/lisp/impl/powerlsp/v1_10/powerlsp.hqx
Written by Roger Corman. For more information, send mail to
[email protected], [email protected] or [email protected] (RogerC34
on America Online).
RefLisp is a small Lisp interpreter. Versions exist for MS Windows,
MS-DOS and UNIX (AIX). The MS-DOS version supports CGA/EGA/VGA
graphics and the Microsoft Mouse. The interpreter is a shallow-binding
(i.e., everything has dynamic scope), reference counting design making
it suitable for experimenting with real-time and graphic user
interface programming. Common Lisp compatibility macros are provided,
and most of the examples in "Lisp" by Winston & Horn have been run on
RefLisp. RefLisp makes no distinction between symbol-values and
function-values, so a symbol can be either but not both. RefLisp
comes with an ASCII manual and many demonstration programs, including
an analogue clock which never stops for garbage collection. It is
written in ANSI C and is in the public domain. Source and binaries are
available from the author's Web site at
http://www.ozemail.com.au/~birchb/reflisp.html
and from the Lisp Utilities repository by anonymous ftp from
ftp.cs.cmu.edu:/user/ai/lang/lisp/impl/reflisp/
For further information, send email to the author Bill Birch
<[email protected]>.
WCL is an implementation of Common Lisp for Sparc based workstations.
It is available free by anonymous ftp from
cdr.stanford.edu:/pub/wcl/ [36.93.0.31]
as the files wcl2.2-solaris-src.tar.gz, wcl2.2-solaris-bins.tar.gz,
wcl2.2-sunos4-src.tar.gz, wcl2.2-sunos4-bins.tar.gz, and
wgdb4.2-sunos4.tar.gz. It includes a native solaris version (but with
no dynamic .o loading or wgdb yet...), can use any version of GCC 2.X
(GCC 2.1 is no longer required), and includes separate binary and
source distribution so that recompilation is no longer needed to
install WCL and WGDB. The wcl2.2-*.tar.gz files contain the WCL
distribution, including CLX and PCL; wgdb4.2-sunos4.tar.gz contains a
version of the GDB debugger which has been modified to grok WCL's
Lisp. WCL provides a large subset of Common Lisp as a Unix shared
library that can be linked with Lisp and C code to produce efficient
and small applications. For example, the executable for a Lisp version
of the canonical ``Hello World!'' program requires only 40k bytes
under SunOS 4.1 for SPARC. WCL provides CLX R5 as a shared library,
and comes with PCL and a few other utilities. For further information
on WCL, see the paper published in the proceedings of the 1992 Lisp
and Functional Programming Conference, a copy of which appears in the
wcl directory as lfp-paper.ps, or look in the documentation directory
of the WCL distribution. Written by Wade Hennessey
<[email protected]>. Please direct any questions to
[email protected]. If you would like to be added to a mailing
list for information about new releases, send email to
[email protected].
XLISP is free, and runs on the IBM PC (MSDOS), Windows 95, Apple
Macintosh, and Unix. It should run on anything with an Ansi C
compiler. It was written by David Michael Betz, 18 Garrison Drive,
Bedford, NH 03110, 603-472-2389 (H&W), [email protected] or
[email protected]. The reference manual was written by
Tim Mikkelsen. Version 2.0 is available by anonymous ftp from
cs.orst.edu:/pub/xlisp/ [128.193.32.1] or
sumex-aim.stanford.edu:/info-mac/lang/
Version 2.1g* is the same as XLISP 2.0, but modified by Tom Almy
<[email protected]> to bring it closer to Common Lisp, in
addition to fixing several bugs. The latest version of XLISP can be
obtained by anonymous ftp from
ftp.cs.cmu.edu:/user/ai/lang/lisp/impl/xlisp/ [128.2.206.173]
It may also be available (in possible older versions) from
ftp.biostr.washington.edu:/pub/xlisp [128.95.10.115]
wasp.eng.ufl.edu:/pub [128.227.116.1]
A Macintosh port of version 2.1e (and the C source code to its
interface) is also available, from Macintosh ftp sites such as
sumex.stanford.edu:/info-mac/dev/xlisp-21e2.hqx
mac.archive.umich.edu:/mac/development/languages/xlisp2.1e2.sit.hqx
The Macintosh version was written by Brian Kendig, <[email protected]>.
To obtain a copy through US mail, send email to Tom Almy,
[email protected]. A Windows version of the statistical
version of xlisp is available by anonymous ftp from
ftp.cica.indiana.edu:/util/wxlslib.zip
A version of XLISP-PLUS 2.1g that includes an experimental byte code
compiler is available by anonymous ftp from
umnstat.stat.umn.edu:/pub/xlispstat/xlisponly/ [128.101.51.1]
as the file xlisp21gbc.tar.gz. Write to Luke Tierney <[email protected]>
for more information.
----------------------------------------------------------------
Subject: [4-1] Commercial Common Lisp implementations.
Allegro Common Lisp:
Allegro Common Lisp 4.2 runs on a variety of platforms, including
Sparcs, RS6000, HP700, Silicon Graphics, DecStation (prices start at
$4,500) and NeXT ($2,000). It requires 12mb RAM for the 680x0 and 16mb
for RISC. It includes native CLOS, X-windows support, Unix interface,
incremental compilation, generational garbage collection, and a
foreign function interface. Options include Allegro Composer
(development environment, including debugger, inspector, object
browser, time/space code profiler, and a graphical user interface,
$1,500), Common LISP Interface Manager (CLIM 2.0 is a portable
high-level user interface management system. CLIM 2.0 for Allegro CL
supports both Motif and Openlook and Windows, ($1,000). Franz also
markets Allegro CL 3.0 for Windows 3.1, Windows NT and Windows95 for
$595 (discount prices of $449 are sometimes advertised in various AI
magazines). A Professional version with royalty free runtime
distribution and source code is available for $2495.
Allegro CL for Windows provides 32-bit compilation, complete CLOS, an
integrated development environment, visual drag & drop Interface Builder,
interface to the Windows API, DLL support, and free runtime delivery.
Write to: Franz Inc., 1995 University Avenue, Berkeley, CA 94704 or
call 1-800-333-7260, 510-548-3600, fax 510-548-8253, telex 340179
WUPUBTLXSFO. Bug reports can be mailed to [email protected]. Questions
about Franz Inc. products (e.g., current and special pricing) can be
sent to [email protected]. To receive Franz Flash, Franz's electronic
newsletter, send mail to [email protected].
Files related to the products (e.g., patches, Franz's GNU-Emacs/Lisp
interface, the Allegro FAQ)
are available by anonymous ftp from
ftp.franz.com:/pub/ [192.48.96.9]
http://www.franz.com/
CLOE:
CLOE (Common Lisp Operating Environment) is a cross-development
environment for IBM PCs (MSDOS) and Symbolics Genera. It includes
CLOS, condition error system, generational garbage collection,
incremental compilation, code time/space profiling, and a stack-frame
debugger. It costs from $625 to $4000 and requires 4-8mn RAM and a 386
processor. Write to: Symbolics, 6 New England Tech Center,
521 Virginia Road, Concord, MA 01742, call 1-800-394-5522 or
508-287-1000 or fax 508-287-1099.
Golden Common Lisp:
Golden Common Lisp (GCLisp 4.4) runs on IBM PCs under DOS, Windows,
OS/2, and Windows NT, costing $2,000 ($250 extra for Gold Hill
Windows), and includes an incremental compiler, foreign function
interface, interactive debugger, SQL interface, and emacs-like editor.
It supports DDE and other Windows stuff, and is CLtL1 compatible.
Supports PCL/CLOS. It requires 4mb RAM, and 12mb disk. See a review in
PC-WEEK 4/1/91 comparing GCLisp with an older version of MCL. Write
to: Gold Hill Computers, 26 Landsdowne Street, Cambridge, MA 02139,
call 617-621-3300, or fax 617-621-0656.
Harlequin LispWorks:
LispWorks (R) from Harlequin runs on a variety of Unix platforms,
including Sun Sparc and clones (SunOS and Solaris), IBM RS/6000 (AIX),
DEC MIPS (Ultrix), DEC Alpha (OSF/1), HP PA (HP-UX), and SGI (IRIX).
LispWorks uses menus and graphics to provide convenient, user friendly
access to its wide array of powerful tools. A C/C++ interface, an SQL
interface, and a fully integrated Prolog compiler are a standard part
of LispWorks. CLIM 2.0 is also available.
+ COMMON LISP: CLtL2 compatible, native CLOS/MOP, generational GC,
C/C++ interface.
+ ENVIRONMENT: Prolog, Emacs-like editor/listener/shell, defadvice,
defsystem, cross-referencing, lightweight processes,
debugger, mail reader, extensible hypertext online doc, LALR
parser generator.
+ BROWSERS/GRAPHERS: files, objects, classes, generic functions,
source code systems, specials, compilation warnings.
+ GRAPHICS: CLX, CLUE, Toolkit, CAPI, Open Look, Motif,
interface builder.
+ INTEGRATED PRODUCTS: CLIM 2.0, KnowledgeWorks (RETE engine).
For further information, contact by e-mail worldwide:
[email protected] (OR @harlequin.co.uk)
or in the US:
FAX: 617-252-6505
Voice: 800-WORKS-4-YOU (800-967-5749) or 617-374-2400 or 617-252-0052
Mail: Harlequin Inc., One Cambridge Center, Cambridge, MA 02142
or in Europe:
FAX: 0223-872-519 (OR 44-1223-872-519 from outside UK)
Voice: 0223-873-800 OR -872-522 (OR 44-1223-873-800 from outside UK)
Telex: 818440 harlqn g
Mail: Harlequin Ltd., Barrington Hall, Barrington, Cambridge, CB2 5RG
For more information, see their web page at the URL
http://www.harlequin.com/
Harlequin FreeLisp:
Harlequin Inc. is shipping FreeLisp (TM), which has been developed
specifically to meet the Lisp teaching requirements of the academic
community in terms of both functionality and price. FreeLisp
is a reduced implementation of Harlequin's premier Common Lisp
development environment, LispWorks (R). FreeLisp runs under on PC's
under Windows, and has many of the environmental features as
LispWorks but does not include a compiler. For prices and information
about FreeLisp, contact by e-mail worldwide
[email protected] (OR @harlequin.co.uk)
or in the US:
fax: 617-252-6505
voice: 800-WORKS-4-YOU (800-967-5749) or 617-374-2400 or 617-252-0052
mail: Harlequin Inc., One Cambridge Center, Cambridge, MA 02142
or in Europe:
fax: 0223-872-519 (OR 44-1223-872-519 from outside UK)
voice: 0223-873-800 OR -872-522 (OR 44-1223-873-800 from outside UK)
Telex: 818440 harlqn g
mail: Harlequin Ltd., Barrington Hall, Barrington, Cambridge, CB2 5RG
Freelisp is available at the URL
http://www.harlequin.com/freelisp/
Ibuki Common Lisp:
Ibuki Common Lisp (IBCL) v02/01 is a commercialized and improved
version of Kyoto Common Lisp. It runs on over 30 platforms, including
Sun3, Sparc, Dec (Ultrix), Apollo, HP 9000, IBM RS/6000, Silicon
Graphics and IBM PCs (under AIX). It includes an incremental compiler,
interpreter, and C/Fortran foreign function interface. It generates C
code from the Lisp and compiles it using the local C compiler. Image
size is about 3mb. Cost is $2800 (workstations), $3500 (servers), $700
(IBM PCs). Supports CLOS and CLX ($200 extra). Source code is
available at twice the cost. Ibuki now also has a product called CONS
which compiles Lisp functions into linkable Unix libraries. Write to:
Ibuki Inc., PO Box 1627, Los Altos, CA 94022, or call 415-961-4996,
fax 415-961-8016, or send email to Richard Weyhrauch, [email protected] or
[email protected].
LinkLisp:
LinkLisp is a Lisp implementation for Windows that supports a large
subset of Common Lisp. It is DLL and VBX callable from C/C++ and
Visual Basic. It costs $249. For more information, write to Conscious
Computing, 3100 Connecticut Avenue NW, Suite 202, Washington, DC
20008, call 202-483-6350, or fax 202-462-9110.
Lucid Common Lisp:
Lucid Common Lisp runs on a variety of platforms, including PCs (AIX),
Apollo, HP, Sun-3, Sparc, IBM RT, IBM RS/6000, Decstation 3100,
Silicon Graphics, and Vax. Lucid includes native CLOS, a foreign
function interface, and generational garbage collection. CLIM is
available for Lucid as a separate product. See also the comments in
question [1-2] on the wizards.doc file that comes with the release.
[Note: Lucid encountered financial difficulties because of forays
into C-related products; the Lisp end of the company remained strong.
Harlequin announced on 23-NOV-94 that they have acquired the
rights to the Lisp-related technology of Lucid, Inc., that they
will market and support Lucid Common Lisp alongside their
LispWorks products, and that they have hired several former Lucid
employees for this purpose.]
For further information, contact by e-mail worldwide:
[email protected] (OR @harlequin.co.uk)
or in the US:
FAX: 617-252-6505
Voice: 800-WORKS-4-YOU (800-967-5749) or 617-374-2400 or 617-252-0052
Mail: Harlequin Inc., One Cambridge Center, Cambridge, MA 02142
or in Europe:
FAX: 0223-872-519 (OR 44-1223-872-519 from outside UK)
Voice: 0223-873-800 OR -872-522 (OR 44-1223-873-800 from outside UK)
Telex: 818440 harlqn g
Mail: Harlequin Ltd., Barrington Hall, Barrington, Cambridge, CB2 5RG
Macintosh Common Lisp:
Macintosh Common Lisp (MCL) is an object-oriented dynamic language
(OODL) from Digitool, Inc. MCL 4.0 will work on any Power Macintosh
with at least 16 MB of RAM, 28 MB of disk storage, and Macintosh System
Software 7.5 or later. MCL 3.1 will work on any 68K-based Macintosh
with at least 8 MB of RAM, 15 MB of disk storage, and Macintosh System
6.x or 7.x. Both versions are included on CD-ROM together with extensive
documentation, runtime sources, development utilities, and sample code.
A CD-ROM drive is required for installation.
MCL implements the industry standard Common Lisp programming language
and CLOS (as defined in Common Lisp: The Language, second edition),
and is fully integrated with the Macintosh family of personal computers.
MCL is a completely integrated development environment, including a
fast incremental compiler which produces efficient native PPC code or
680x0 code, a window-based debugger, a source code stepper, a dynamic
object inspector, a stack backtrace inspector, a programmable
Macintosh-style emacs-like editor, online documentation, and an
interactive interface toolkit. MCL supports multiple processes and
provides both high-level object-oriented user interface class library
and complete low-level access to the Macintosh Toolbox.
Using MCL, you can create a standalone double-clickable Macintosh
application. A license is required to distribute an application
created with MCL. Licenses are available to include the MCL compiler
in a distributed application.
MCL may be purchased individually or as a subscription; site licenses
are also available. For more information, mailto:[email protected];
for orders, mailto:[email protected], call (617) 441-5000 or fax
(617) 576-7680. See http://www.digitool.com/MCL-price-list.html for
current pricing.
Medley:
Medley 2.0 is a Common Lisp development environment that includes a
native CLOS w/MOP, window toolkit, window-based debugger, incremental
compiler, structure editor, inspectors, stepper, cross-referencer
(Masterscope), code analysis tools, and browsers. It is the successor
to InterLisp-D. It runs on a variety of platforms, including Suns,
DecStations, 386/486s, IBM RS/6000, MIPS, HP, DEC Alpha, and Xerox
1186. The price for Unix machines is $3,195 for the developer version
and $1,250 for the runtime version. Medley also runs under DOS 4.0 or
higher ($795 developer version, $300 runtime version, and $250 student
version). Instructional licenses are also available at $250/copy for DOS
(to a max of $1,250) and $1,000/copy for Unix (to a max of $5,000).
For more information, write to Venue, 1624 Franklin Street, Suite 1212,
Oakland, CA 94612, call 800-228-5325 or 510-835-8856, fax
510-835-8251, or send email to [email protected].
muLISP-90:
muLISP-90 v7.1 is a small Lisp which runs on IBM PCs (or the HP 95LX
palmtop), MS-DOS version 2.1 or later. It isn't Common Lisp, although
there is a Common Lisp compatibility package which augments muLISP-90
with over 450 Common Lisp special forms, macros, functions and control
variables. Includes a screen-oriented editor and debugger, a window
manager, an interpreter and a compiler. Among the example programs is
DOCTOR, an Eliza-like program. The runtime system allows one to create
small EXE or COM executables. Uses a compact internal representation
of code to minimize space requirements and speed up execution. The
kernel takes up only 50k of space. Costs $150. muLISP-XM is a version
of muLISP-90 that can take advantage of up to 4 gigabytes of extended
memory and costs $300. Write to Soft Warehouse, Inc., 3660 Waialae
Avenue, Suite 304, Honolulu, HI 96816-3236, call 808-734-5801, or fax
808-735-1105.
NanoLISP:
NanoLISP 2.0 is a Lisp interpreter for DOS systems that supports a
large subset of the Common Lisp (CLtL2) standard, including lexical and
dynamic scoping, four lambda-list keywords, closures, local functions,
macros, output formatting, generic sequence functions, transcendental
functions, 2-d arrays, bit-arrays, sequences, streams, characters
double-floats, hash-tables and structures. Runs in DOS 2.1 or higher,
requiring only 384k of RAM. Cost is $100. Write to: Microcomputer Systems
Consultants, PO Box 6646, Santa Barbara, CA 93160 or call 805-967-2270.
Poplog Common Lisp:
Poplog Common Lisp is an incremental compiler and X-based development
environment for Common Lisp. Poplog Common Lisp provides a compact and
memory-efficient implementation which has recently been upgraded to
include support for CLtL2, including a native CLOS implementation.
The Poplog environment also includes efficient incremental compilers
for Prolog, Standard ML and Pop-11, a language-sensitive editor and
supports easy dynamic linking to C, Fortran etc. Poplog has over 400
customers in 36 countries.
Poplog runs on a variety of platforms including Sun SPARC (SunOS 4.1,
Solaris 2.x), HP-RISC (HP-UX), Silicon Graphics (IRIX), PC UNIX (SCO,
Linux), DECstation (Ultrix) and under VMS on both VAX and Alpha.
For more information, contact:
Integral Solutions Ltd, 3 Campbell Court,
Bramley, Basingstoke, Hants. RG26 5EG, UK.
Call +44 (0)1256 882028, fax +44 (0)1256 882182
Email [email protected]
In North America, contact:
Computable Functions, Inc., 35 South Orchard Drive,
Amherst, MA 01002.
Call 413-253-7637, fax 413-545-1249.
Procyon Common Lisp:
Procyon Common Lisp runs on either the Apple Macintosh or IBM PC (386/486
or OS/2 native mode), costing 450 pounds sterling ($675) educational,
1500 pounds ($2250) commercial. It requires 2.5mb RAM on the Macintosh
and 4mb RAM on PCs (4mb and more than 4mb recommended respectively). It
is a full graphical environment, and includes a native CLOS with
meta-object protocol, incremental compilation, foreign function
interface, object inspector, text and structure editors, and debugger.
Write to: Scientia Ltd., St. John's Innovation Centre, Cowley Road,
Cambridge, CB4 4WS, UK, with phone +44-223-421221, fax +44-223-421218.
E-mail: [email protected].
[NOTE: The rights to the MS Windows version of Procyon were sold to
Franz who are marketing and developing it as Allegro CL\PC. See
Allegro's entry for more information. The MS Windows version of
Procyon is no longer available from Scientia. Expertelligence no
longer distributes any version of Procyon.]
Software Engineer:
Software Engineer 2.1 is a Lisp for Windows that creates small
stand-alone executables (no royalties or run-time libraries required).
It is a subset of Common Lisp, but includes CLOS. Supports DDE and
Windows API calls. It requires 2mb RAM, but can use up to 16mb of
memory, generating 286/386 specific code. It costs $350. Write to:
Raindrop Software, 833 Arapaho Road, Suite 104, Richardson, TX 75081,
call 214-234-2611, fax 214-234-2674, or send email to
[email protected].
Star Sapphire Common LISP:
Star Sapphire Common LISP 3.4 provides a subset of Common Lisp and
includes an emacs-like editor, compiler, debugger, DOS graphics and
CLOS. It runs on IBM PCs (MSDOS or Windows), requires 640k RAM, a hard
disk, and costs $100. Write to: Sapiens Software Corporation,
PO Box 3365, Santa Cruz, CA 95063-3365, call 408-458-1990,
fax 408-425-0905/9220. Copies may also be ordered from the Programmers'
Shop at 800-421-8006. Sapiens Software also has a Lisp-to-C
translator in beta-test.
Top Level Common Lisp:
Top Level Common Lisp includes futures, a debugger, tracer, stepper,
foreign function interface and object inspector. It runs on Unix
platforms, requiring 8mb RAM, and costs $687. Write to: Top Level,
100 University Drive, Amherst, MA 01002, call (413) 549-4455, or fax
(413) 549-4910.
Lisps which run on special-purpose hardware (Lisp Machines) include
o Symbolics 1-800-394-5522 (508-287-1000) fax 508-287-1092
6 Concord Farms, 555 Virginia Road, Concord, MA 01742.
In Germany: Symbolics Systemhaus GmbH, Mergenthalerallee 77,
65760 Eschborn, (49) 6196-47220, fax (49) 6196-481116.
Symbolics Open Genera runs on DEC 3000 Workstations (models 600
and 800 APX with the OSF/1 operating system), at a price of $18,500.
o TI Explorers
Texas Instruments Incorporated, Data Systems Group,
P.O. Box 181153 DSG-230, Austin, Texas 78718
o Xerox Interlisp. See Medley above.
----------------------------------------------------------------
Subject: [4-1a] Lisp to C translators
Lisp-to-C Translator translates Common Lisp into human-readable ANSI
C. Release 3.2 supports such features as CLOS, the condition system,
Lisp type declaration heeding, and Mac, Windows, and Alpha
compatibility. (Release 3.0, introduced in 1992, eliminated the old
requirement that the garbage collector had to be called explicitly).
Works with Lucid, Symbolics, Allegro, Harlequin and MCL. It costs
$11,995. Write to: Chestnut Software, Inc., 2 Park Plaza, Suite 205,
Boston, MA, 02116, call 617-542-9222, fax 617-542-9220, or e-mail Mr.
Kenneth J. Koocher <[email protected]>.
Some Lisp compilers (AKCL, Ibuki) and Scheme compilers (Bigloo,
Hobbit/SCM, Scheme->C) compile into C.
----------------------------------------------------------------
Subject: [4-2] Scheme Implementations
Scheme implementations are listed in the Scheme FAQ posting,
Free Scheme implementations include PC-Scheme, PCS/Geneva, MIT Scheme (aka
C-Scheme), SCM, Hobbit, Gambit, T, Oaklisp, Elk, Scheme->C, SIOD
(Scheme in One Defun), XScheme, Fools' Lisp, Scheme48, UMB Scheme,
VSCM, Pixie Scheme, HELP (a lazy Scheme), Similix, FDU Scheme,
PseudoScheme, Scheme84 and Scheme88.
Commercial Scheme implementations include Chez Scheme, MacScheme, and EdScheme.
Of the free Scheme implementations, the following are implemented in Lisp:
Peter Norvig's book "Paradigms of AI Programming" has a chapters about
Scheme interpreters and compilers, both written in Common Lisp. The
software from the book is available by anonymous ftp from
mkp.com:/Norvig/ and on disk in Macintosh or DOS format from
the publisher, Morgan Kaufmann. For more information, contact: Morgan
Kaufmann, Dept. P1, 2929 Campus Drive, Suite 260, San Mateo CA 94403,
or call Toll free tel: (800) 745-7323; FAX: (415) 578-0672
PseudoScheme is available free by anonymous ftp from
swiss-ftp.ai.mit.edu:/archive/pseudo/pseudo-2-8.tar.Z [18.43.0.152]
It is Scheme implemented on top of Common Lisp, and runs in Lucid,
Symbolics CL, VAX Lisp under VMS, and Explorer CL. It should be easy
to port to other Lisps. It was written by Jonathan Rees
([email protected], [email protected]). Send mail to
[email protected] to be put on a mailing list for
announcements. Conforms to R3RS except for lacking a correct
implementation of call/cc. It works by running the Scheme code through
a preprocessor, which generates Common Lisp code.
Scheme84 is in the public domain, and available by mail from Indiana
University. It runs on the VAX in Franz Lisp under either VMS or BSD Unix.
To receive a copy, send a tape and return postage to: Scheme84
Distribution, Nancy Garrett, c/o Dan Friedman, Department of Computer
Science, Indiana University, Bloomington, Indiana. Call 1-812-335-9770
or send mail to [email protected] for more information. It will also
run in Jeff Dalton's port of Franz Lisp to Net/Free/386BSD on 386-like
machines. (See the Lisp FAQ for information on Franz Lisp.)
Scheme88 is a re-implementation of Scheme84 to run in Common Lisp. It
available by anonymous ftp from
rice.edu:/public/scheme88.sh
and also from the Scheme Repository.
----------------------------------------------------------------
Subject: [4-4] Free Implementations of Other Lisp Dialects
Franz Lisp:
[Franz Lisp is a dialect of Lisp that predates Common Lisp. It is
very similar to MacLisp. It lacks full lexical scoping.]
The official archive site for Franz List Opus 38.92 and 38.93b (the
last public domain releases) is
ftp.cs.cmu.edu:/user/ai/lang/others/franzlsp/
It includes the official version from the ucbvax ftp site before
its demise, Barry Schein's port of 38.92, the UC Davis port of 38.92,
and Jeff Dalton's port of 38.92 (see below). For more information,
contact [email protected].
An implementation of (Berkeley) Franz Lisp Opus 38.92 for 386/486
machines running NetBSD 0.9 (and possibly also 386BSD and FreeBSD)
is available by anonymous ftp from
macbeth.cogsci.ed.ac.uk:/pub/franz-for-NetBSD/
The implementation generates C code and hence is quite portable. It
has been tested on 68K Suns, VAX 750s, and ICL Perqs running PNX.
A reference manual is included in the distribution. For more
information, write to Jeff Dalton <[email protected]>, or see the URL
http://www.aiai.ed.ac.uk/~jeff/franz-for-386.html
PC LISP is a Lisp interpreter for IBM PCs (MSDOS) available from any
site that archives the group comp.binaries.ibm.pc, such as
wuarchive.wustl.edu:/mirrors/msdos/lisp/pclisp30.zip
PC-LISP is a Franz LISP dialect and is by no means Common LISP
compatible. It is also available directly from the author by sending
2 blank UNFORMATTED 360K 48TPI IBM PC diskettes, a mailer and
postage to: Peter Ashwood-Smith, 8 Du Muguet, Hull, Quebec, CANADA,
J9A-2L8; phone 819-595-9032 (home). Source code is available from the
author for $15.
EuLisp:
Feel (Free and Eventually Eulisp) is an initial implementation of the
EuLisp language. It can be retrieved by anonymous FTP from
ftp.bath.ac.uk:/pub/eulisp/
as the file feel-0.75.tar.Z. feel-0.75.sun4.Z is the Sparc executable.
The EuLisp language definition is in the same directory. Feel is also
available from
ftp.gmd.de:/languages/lisp/eulisp/ [129.26.8.84]
It includes an integrated object system, a module system, condition
system, and support for parallelism (threads). EuLisp (European
Lisp) is sort of like an extended Scheme. The program is a C-based
interpreter, and a bytecode interpreter/compiler will be available
sometime soon. The distribution includes an interface to the PVM
library, support for TCP/IP sockets, and libraries for futures, Linda,
and CSP. Feel is known to run on Sun3, Sun4, Stardent Titan, Alliant
Concentrix 2800, Orion clippers, DEC VAX, DECstation 3000, Gould
UTX/32, and Inmos T800 transputer (using CS-Tools). (All bar the last
four have a threads mechanism.) It can run in multi-process mode on
the first three machines, and hopefully any other SysV-like machine
with shared memory primitives. Porting Feel to new machines is
reasonably straightforward. It now also runs on MS-DOS machines.
Written by Pete Broadbery <[email protected]>.
Apply/Eu2C is an EuLisp->C compiler available from ISST. Eu2C runs on
top of Franz Allegro CL 4.1 and compiles EuLisp-Modules into C source
code which then must be compiled by an ANSI C-compiler (currently only
GCC is supported). The Eu2C implementation provides EuLisp 0.99
level-0, with the exception of concurrency. Future versions of Eu2C
will include a C interface and straight module compilation. The
development of Apply/Eu2C was supported by the German Federal Ministry
for Research and Technology (BMFT) within the joint project APPLY. The
partners of this project are the Christian Albrechts University Kiel,
the Fraunhofer Institute for Software Engineering and Systems
Engineering (ISST), the German National Research Center for Computer
Science(GMD), and VW-Gedas. The main goal of APPLY project is to
develop a Lisp system which consistently supports the efficient
execution of applications and simplifies their integration into
current software environments. Towards that end, ISST is
investigating strategies for the compilation of EuLisp-Modules into
efficient stand-alone C-Programs. The Eu2C compiler is the first step
along this path. Eu2C is available by anonymous ftp from
ftp.isst.fhg.de:/APPLY/Distribution/. Please send bug reports and
comments to [email protected] or [email protected]. If
you're using Eu2C, please send them a message with "Apply/Eu2C" in the
subject line to be added to the mailing list of users.
More information about EuLisp may be found in
Lisp and Symbolic Computation 6(1-2), August 1993
which was devoted to EuLisp.
JLISP:
jlisp is a lisp interpreter designed to be used as an embedded
interpreter and is easily interfaced with C/C++. jlisp is easily
extended. It is available by anonymous ftp from
ftp.ee.rochester.edu:/pub/weisberg/jlisp-1.03.tar.gz
For more information, write to Jeff Weisberg <[email protected]>
----------------------------------------------------------------
Subject: [4-5] Commercial Implementations of Other Lisp Dialects
Franz Lisp 2.0 runs on the Apple Macintosh, requiring 1mb RAM for the
interpreter ($99) and 2.5mb RAM for the compiler ($199). Student prices
are $60 for the interpreter and $110 for the interpreter and compiler.
Includes editor and language reference manual. Complete sources are
available for $649. The ALJABR symbolic mathematics system costs $249.
Write to: Fort Pond Research, 15 Fort Pond Road, Acton, MA 01720,
call 1-508-263-9692, or send mail to [email protected].
Le-Lisp includes a compiler, color and graphic output, a debugger, a
pretty printer, performance analysis tools, tracing, and incremental
execution. Le-Lisp currently runs on Unix, VMS, and Windows 3.1. Note
that Le-Lisp is neither Common Lisp nor Scheme. Le-Lisp was
originally developed in 1980 at Inria, the French national computer
science laboratory, by a team led by Jerome Chailloux for work on VLSI
design. It was based on several earlier Lisps in the MacLisp family,
but was not directly derived from MacLisp. Le-Lisp enjoyed a large
success in the French academic world because it was small, fast, and
portable, being based on a abstract machine language called LLM3. In
1983, for example, Le-Lisp ran on Z-80 machines running CP/M. In 1987,
Ilog was formed as an offshoot of Inria to commercialize and improve
Le-Lisp and several products which had been developed with it,
including a portable graphic interface system and an expert system
shell. Since then, Ilog has continued to grow and expand the use of
Le-Lisp into industrial markets around the world. Ilog is the largest
European Lisp vendor, and continues to develop new products and
markets for Lisp. In 1992, Ilog released the next major version of
Le-Lisp, Le-Lisp version 16. This version modernizes Le-Lisp for use
in the industrial world, adding lexical closures and
special-form-based semantics for static analysis, a new object system
based on the EuLisp object system (TELOS), an enhanced module system
for application production, a conservative GC for integration with C
and C++, and compilation to C for portability and efficiency on a wide
range of processors. For pricing and other information, write to
ILOG, 2 Avenue Gallieni, BP 85, 94253 Gentilly Cedex, France, call
33-1-46-63-66-66, fax 33-1-46-63-15-82, or send email to Jerome
Chailloux ([email protected]).
CLISP v6.89 is a library of functions which extends the C programming
language to include some of the functionality of Lisp. Requires
ANSI C. Costs $349 with no run-time fee.
Write to Drasch Computer Software, 187 Slade Road, Ashford, CT 06278,
or call or fax 203-429-3817.
Two references in Dr. Dobb's journal on Lisp-style libraries for C
are: Douglas Chubb, "An Improved Lisp-Style Library for C", Dr. Dobb's
Jounral #192, September 1992, and Daniel Ozick, "A Lisp-Style Library
for C", Dr. Dobb's Journal #179:36-48, August 1991. Source is available by
ftp from various archives, including wuarchive.wustl.edu (MSDOSDDJMAG),
or ftp.mv.com:/pub/ddj, or the DDJ Forum on Compuserve.
Lily (LIsp LibrarY) is a C++ class library that lets C++ programmers
write LISP-style code. Includes some example programs from Winston's
Lisp book recoded in Lily. Most or all of chapters 17 (Symbolic
Pattern Matching), 18 (Expert Problem Solving), and 23 (Lisp in Lisp)
are implemented in the examples. Lily works with GNU G++ (2.4.5) and
Turbo C++ for Windows. Lily is available by anonymous ftp from
sunsite.unc.edu:/pub/packages/development/libraries/ [152.2.22.81]
as lily-0.1.tar.gz. This site is fairly slow; a copy is available from
the Lisp Utilities collection. For more information, contact
Roger Sheldon <[email protected]>.
Other Lisps for PCs include:
o UO-LISP from Calcode Systems, e-mail:[email protected]
It comes complete with compiler and interpreter, and is optimised for
large programs. It is Standard LISP, not Common LISP. They are based
in Amoroso Place in Venice, CA.
o LISP/88 v1.0. Gotten from Norell Data Systems, 3400 Wilshire Blvd,
Los Angeles, CA 90010, in 1983. They may or may not still exist.
o IQLisp. Not a Common Lisp but still very good for PCs - you can
actually get a lot done in 640K. The lisp itself runs in less than
128K and every cons cell takes only 6 bytes. Unfortunately that
makes the 640K (maybe a little more, but certainly no more than 1M)
limit really hard. It has a byte code compiler which costs extra.
This has support for all sorts of PC specific things.
It costs $175 w/o compiler, $275 with.
Write to: Integral Quality, Box 31970, Seattle, WA 98103,
call Bob Rorschach, (206) 527-2918 or email [email protected].
----------------------------------------------------------------
Subject: [4-6] What is Dylan?
Dylan is a new Object-Oriented Dynamic Language (OODL), based on
Scheme, CLOS, and Smalltalk. The purpose of the language is to retain
the benefits of OODLs and also allow efficient application delivery.
The design stressed keeping Dylan small and consistent, while allowing
a high degree of expressiveness. Dylan is consistently object-oriented;
it is not a procedural language with an object-oriented extension. A
manual/specification for the language is available from Apple Computer.
Send email to [email protected] or write to
Apple Computer, 1 Main Street, Cambridge, MA 02142. Include your
complete address and also a phone number (the phone number is
especially important for anyone outside the US). Comments on Dylan can
be sent to the internet mail address [email protected].
The mailing list [email protected] is for any and all
discussions of Dylan, including language design issues, implementation
issues, marketing issues, syntax issues, etc. The mailing list
[email protected] is for major announcements about
Dylan, such as the availability of new implementations, new versions
of the manual, etc. This mailing list should be *much* lower volume
than info-dylan. Everything sent to this list is also sent to
info-dylan. The newsgroup comp.lang.dylan is gatewayed to the
info-dylan mailing list.
Send mail to the -request version of the list to be added to it.
You can also send an email message to [email protected]
with "subscribe info-dylan" or "unsubscribe info-dylan" in the body,
and likewise for the other lists, mutatis mutandis.
Apple hasn't announced plans to release Dylan as a product.
The directory cambridge.apple.com:pub/dylan contains some documents
pertaining to Dylan, including a FAQ list.
======== THOMAS ========
Thomas is a compiler for a language that is compatible with the
language described in the book "Dylan(TM) an object-oriented dynamic
language" by Apple Computer Eastern Research and Technology, April
1992. Thomas was written at Digital Equipment Corporation's Cambridge
Research Laboratory. Thomas is NOT Dylan(TM) and was built with no
direct input, aid, assistance or discussion with Apple.
Thomas is available to the public by anonymous ftp at
crl.dec.com:/pub/DEC/Thomas
gatekeeper.pa.dec.com:/pub/DEC/Thomas
swiss-ftp.ai.mit.edu:/archive/Thomas
The Thomas system is written in Scheme and runs under MIT's CScheme,
DEC's Scheme->C, and Marc Feeley's Gambit. It can run on a wide range
of machines including the Macintosh, PC compatibles, Vax, MIPS, Alpha,
and 680x0. Thomas generates IEEE compatible Scheme code.
A ready-made version of Thomas 1.1 interpreter built upon MacGambit
2.0 as a double-clickable Macintosh application is available by
anonymous ftp from cambridge.apple.com:/pub/dylan/gambit/ as
the file thomas-1.1-interp.hqx.
For discussion of Thomas, send a note to
[email protected]
to be added to the mailing list.
DEC CRL's goals in building Thomas were to learn about Dylan by
building an implementation, and to build a system they could use to
write small Dylan programs. As such, Thomas has no optimizations of
any kind and does not perform well.
The original development team consisted of:
Matt Birkholz ([email protected])
Jim Miller ([email protected])
Ron Weiss ([email protected])
In addition, Joel Bartlett ([email protected]), Marc Feeley
([email protected]), Guillermo Rozas ([email protected])
and Ralph Swick ([email protected]) contributed time and energy to the
initial release.
======== Marlais ========
Marlais is a simple interpreter for a language strongly resembling
Dylan. It is available by anonymous ftp from
ftp.cis.ufl.edu:/pub/Marlais
cambridge.apple.com:/pub/dylan/Marlais
travis.csd.harris.com:/pub/
Currently runs on i386 and i486 (OS/2 or Linux), IBM PC/RT, IBM
RS/6000, HP9000/300, HP9000/700, DECstations (Ultrix), SGI (IRIX),
Sony News, Apple Macintosh (A/UX), Sun3, Sun4, Vax (4.3bsd and
ultrix), m88k (Harris Nighthawk running CX/UX), MIPS M/120, Sequent
Symmetry, Encore Multimax. Contact Joe Wilson <[email protected]> or
Brent Benson <[email protected]> for more information.
================
The Gwydion Project at CMU is developing an innovative new software
development environment based on the Dylan language (and, in the
process, will make available a very high-quality implementation of
Dylan). This project includes many of the same people responsible for
CMU Common Lisp. (In Welsh mythology, Gwydion is the uncle of Dylan
and nephew of Math.) A Mosaic page describing the project goals, how
they fit in with the Dylan language, and copies of the Dylan language
manual and latest approved design notes is available as
http://legend.gwydion.cs.cmu.edu/gwydion/
For more information, write to [email protected].
Mindy (Mindy Is Not Dylan Yet) is a Dylan-like language from the
Gwydion Project. Mindy is intended for use as a development tool while
work on the "real" high-performance Dylan implementation progresses.
Mindy is available by anonymouse ftp from legend.gwydion.cs.cmu.edu as
the file /afs/cs.cmu.edu/project/gwydion/release/mindy.tar.gz.
Send bug reports to [email protected]; support will be minimal.
----------------------------------------------------------------
Subject: [4-7] What is Pearl Common Lisp?
When Apple Computer acquired Coral Software in January 1989, they
re-released Coral's Allegro Common Lisp and its optional modules as
Macintosh Allegro Common Lisp (now just Macintosh Common Lisp).
Coral's other product, Pearl Lisp, was discontinued at that time.
Pearl Lisp provides a subset of the functionality of MACL 1.3 and is
not even fully CLtL1-compatible (e.g., the implementation of defstruct is
different).
Despite rumors to the contrary, Pearl Lisp is not and never was public
domain. Nevertheless, Pearl Lisp and its documentation were placed in
the "Moof:Goodies:Pearl Lisp" folder on the first pressing of "Phil
and Dave's Excellent CD", the precursor to the current Apple
Developer's CD-ROM series. Apple removed Pearl from later versions of
the developer CD-ROM distribution because of complaints from other
Lisp vendors. If you own a copy of Pearl Lisp or a copy of this
CD-ROM, you can make it runnable under System 7 with some slight
modifications using ResEdit. To repeat, Pearl Lisp is NOT public
domain, so you must own a copy to use it.
To make it runnable, one needs to use ResEdit to make changes to the
BNDL and FREF resources so that it will connect to its icons properly.
This will make it respond to double-clicks in the normal manner and
make it be properly linked to its files. Detailed instructions for
modifying Pearl Lisp using ResEdit may be obtained from the Lisp
Utilities Repository by anonymous ftp from
ftp.cs.cmu.edu:/user/ai/lang/lisp/impl/pearl/
as the file pearl.txt.
After you've made the changes, it will run under System 7 on 68000s
and 68030s if you turn off 32-bit addressing. It seems to bomb on a
Quadra.
If you need a more powerful Lisp or one that is compatible with the
standard for Common Lisp, consider purchasing Macintosh Common Lisp.
----------------------------------------------------------------
Subject: [4-9] What Lisp-related discussion groups and mailing lists exist?
Before posting to any discussion group, please read the rest
of this FAQ, to make sure your question isn't already answered.
Scheme-related mailing lists and newsgroups are listed in the Scheme
FAQ, and AI-related mailing lists and newsgroups are listed in the AI FAQ.
First of all, there are several Lisp-related newsgroups:
comp.lang.lisp General Lisp-related discussions.
See below for archive information.
comp.lang.clos Discussion related to CLOS, PCL, and
object-oriented programming in Lisp.
Gatewayed to [email protected].
(or equivalently, [email protected])
See below for info on the newsgroup's archives.
comp.org.lisp-users Discussions related to Association of Lisp Users.
Gatewayed to the ALU mailing list. This is an
organizational mailing list/newsgroup, not a
technical forum.
comp.std.lisp For discussion of emerging standards for
the Lisp language, including "de facto" standards.
Moderated by Brad Miller <[email protected]>.
Submissions should be sent to
[email protected]
Archived on
ftp.cs.rochester.edu:/pub/archives/lisp-standards/
Gatewayed to a mailing list (send mail to
[email protected] to join).
comp.lang.lisp.mcl Discussions related to Macintosh
Common Lisp. This newsgroup is gatewayed
to the [email protected]
mailing list and archived on digitool.com.
comp.lang.lisp.franz Discussion of Franz Lisp, a dialect of Lisp.
(Note: *not* Franz Inc's Allegro.)
comp.lang.lisp.x Discussion of XLISP, a dialect of Lisp, and XScheme.
comp.sys.xerox Discussions related to using Medley (name exists
for historical reasons, and is likely to change
soon). Gatewayed to the info-1100 mailing list.
comp.sys.ti.explorer TI Explorers Lisp machines.
comp.windows.garnet Garnet, a Lisp-based GUI.
comp.ai and subgroups General AI-related dicusssion.
The newsgroup comp.lang.lisp is archived on
ftp.gmd.de:/usenet/comp.lang.lisp/ [129.26.8.84]
by month, from 1989 onward. Individual files are in rnews
format. (They contain articles prefixed by a header line "#! rnews
<nchars> archive" where <nchars> is the number of characters in the
article following the header. That format is convenient for various
news processing programs (e.g. relaynews) and is rather easy to
process from a lisp program too.) A copy of the GMD archives for
comp.lang.lisp is available on cambridge.apple.com:/pub/comp.lang.lisp/.
We list several mailing lists below. In general, to be added to
a mailing list, send mail to the "-request" version of the address.
This avoids flooding the mailing list with annoying and trivial
administrative requests. [To subscribe to info-dylan, or
other mailing lists based at cambridge.apple.com, send a message to
[email protected] with "subscribe <list_name>" in the
message body. Likewise use "unsubscribe <list_name>" to cancel your
subscription and "help" to get help.]
General Lisp Mailing Lists:
[email protected] Technical discussion of Common Lisp.
[email protected] Low volume moderated mailing list
associated with the Lisp Utilities
Repository at CMU. (Also known as
[email protected])
[email protected] A mailing list concerning the contents
of this FAQ posting only.
[email protected] Forum for use by members (current
and prospective) of the Association
of Lisp Users. It is bidirectionally
gatewayed into the newsgroup
comp.org.lisp-users. This is an
organizational mailing list,
not a technical forum.
Particular Flavors of Lisp:
[email protected] Macintosh Common Lisp. Gatewayed
to the comp.lang.lisp.mcl newsgroup.
[email protected] Automatically generated digest format
version of the info-mcl mailing list.
[email protected] CMU Common Lisp bug reports
[email protected] Symbolics Lisp Users Group
Archived on warbucks.ai.sri.com and
ftp.ai.sri.com:/pub/slug.
[email protected] Franz Allegro Common Lisp
[email protected] Lisp on the Amiga
[email protected] Kyoto Common Lisp
Archived in ftp.cli.com:/pub/kcl/kcl-mail-archive
[email protected] Forwards to [email protected].
[email protected] LispWorks
[email protected] CLISP
To subscribe, send mail to [email protected]
with "subscribe clisp-list <your full name>" in the message body.
Use "help" to get a help message back and "unsubscribe clisp-list"
to remove yourself from the list.
[email protected] TI Explorer Lisp Machine
[email protected] TI Explorer Lisp Machine
[email protected] Xerox/Envos Lisp machine environment,
InterLisp-D, and Medley. Gatewayed to
the newsgroup comp.sys.xerox. Will be
moving to [email protected].
[email protected] The Franz Lisp Language.
[email protected] Maintainers of Franz Lisp.
Lisp Windowing Systems:
[email protected] Common Lisp Window System Discussions.
[email protected] CLX (Common Lisp X Windows)
[email protected] Common Lisp Interface Manager
[email protected] Common Lisp User-Interface Environment
[email protected] Express Windows
[email protected] Garnet (send mail to [email protected]
or [email protected] to be added)
[email protected] GINA and CLM
[email protected] LispWorks
[email protected] WINTERP (OSF/Motif Widget INTERPreter)
[email protected] YYonX
Lisp Object-Oriented Programming:
[email protected] (same as [email protected])
Discussion related to CLOS, PCL, and object-oriented programming
in Lisp. The name is in honor of the first freely-available
implementation of CLOS, Xerox PARC's Portable Common Loops, and
was originally the mailing list for discussing that
implementation. Now gatewayed to the comp.lang.clos newsgroup.
The mailing list is archived on nervous.cis.ohio-state.edu in
the directory pub/lispusers/commonloops.
The CLOS code repository is in pub/lispusers/clos.
Miscellaneous:
[email protected]
Use of Lisp and Lisp-based systems in statistics.
[email protected]
Job offers requiring a knowledge of Lisp. See [1-7].
Electronic Journals:
Electronic Journal of Functional and Logic Programming (EJFLP)
EJFLP is a refereed journal that will be distributed for free via e-mail.
The aim of EJFLP is to create a new medium for research investigating the
integration of the functional, logic and constraint programming paradigms.
For instructions on submitting a paper, send an empty mail message with
Subject: Help
to
[email protected].
You will receive an acknowledgment of your submission within a few hours.
To subscribe to the journal, send an empty mail message to
[email protected]
You will receive an acknowledgment of your subscription within
a few days.
If there are any problems with the mail-server, send mail to
[email protected].
The editorial board is: Rita Loogen (RWTH Aachen), Herbert Kuchen (RWTH
Aachen), Michael Hanus (MPI-Saarbruecken), Manuel MT Chakravarty (TU
Berlin), Martin Koehler (Imperial College London), Yike Guo (Imperial
College London), Mario Rodriguez-Artalejo (Univ. Madrid), Andy Krall
(TU Wien), Andy Mueck (LMU Muenchen), Tetsuo Ida (Univ. Tsukuba,
Japan), Hendrik C.R. Lock (IBM Heidelberg), Andreas Hallmann (Univ.
Dortmund), Peter Padawitz (Univ. Dortmund), Christoph Brzoska (Univ.
Karlsruhe).
----------------------------------------------------------------
Subject: [4-10] Where can I get a copy of the ANSI Common Lisp standard?
What is ISO Lisp?
As of December 8, 1994, Common Lisp is now an official ANSI Standard:
ANSI X3.226:1994 American National Standard for Programming Language
Common LISP (X3J13).
Copies of the ANSI/X3.226 standard may be purchased from the
American National Standards Institute
11 West 42nd Street
New York, NY 10036
For more information, visit the ANSI home page at http://www.ansi.org/
A web version of the ANSI Common Lisp standard is not available. The
official ANSI standard is available only in hardcopy form.
However, Kent Pitman ([email protected]) of Harlequin, Inc. has, with
permission from ANSI and X3, written an HTML document that is based on
ANSI standard for Common Lisp. This version is not a definitive
reference, but is much more practical for most casual browsing. It is
also cross-referenced against some design documents. The document is
available for online browsing at
http://www.harlequin.com/books/HyperSpec/FrontMatter/index.html
Subject to some legal restrictions, you can download a copy for your
own use and get much better performance. Visit
http://www.harlequin.com/books/HyperSpec/
for information on downloading your own copy. The .tar.gz file is
just a little over 2MB, and unpacks into a set of files that is just
a little over 15MB.
Copies of the TeX sources and Unix-compressed DVI files for the *draft*
version of the standard may be obtained by anonymous FTP from
parcftp.xerox.com:/pub/cl/ [13.1.64.94]
The files corresponding to the second Public Review of Common Lisp are
in the directory /pub/cl/dpANS2/*. These files correspond to draft
14.10, also known as document X3J13/93-102, which was forwarded by
X3J13 to X3 in October, 1993. (The files from the first draft are in
the directory /pub/cl/dpANS1/*.) The draft is about 1500 pages long.
The file Reviewer-Notes.text should be read before ftping the other files.
For more information, write to X3 Secretariat, Attn: Lynn Barra, 1250
Eye Street NW, Suite 200, Washington, DC 20005-3922, call
202-626-5738, fax 202-638-4922, or send email to [email protected].
The international working group on Lisp is ISO/IEC JTC1/SC22/WG16.
Pierre Parquier ([email protected]) is the WG16 Convenor. Kent Pitman
([email protected]) is the International Representative of X3J13 to
WG16 and is also Project Editor for WG16. WG16 is working on the
design of a dialect of Lisp called ISLISP (which is neither a subset
nor a superset of Common Lisp). A Committee Draft (CD) of the ISLISP
specification has been registered by WG16 as ``CD13816: Information
Technology - Programming languages, their environments and system
software interfaces - Programming language ISLISP.'' The CD, which
WG16 internally refers to as version 15.6, is available by anonymous
FTP from
ma2s2.mathematik.uni-karlsruhe.de:/pub/lisp/islisp/ [129.13.115.2]
in the directory islisp-15.6/.
The draft has passed its first CD letter ballot. A second WG16 letter
ballot will be held to determine whether this Committee Draft will
become a Draft International Standard (DIS); this is expected to
happen by April 1996.
----------------------------------------------------------------
;;; *EOF*
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |