[ новости /+++ | форум | теги | ]

13. LanWorks BootWare PROMs

This information may save you time. In order to make LanWorks BootWare(tm) PROMs to correctly start up a Linux kernel image, the "bootsector" part of the image must be modified so as to enable the boot prom to jump right into the image start address. The net-bootable image format created by netboot/etherboot's `mknbi-linux' tool differs and will not run if used with BootWare PROMs.

A modified bootsector together with a Makefile to create a BootWare-bootable image after kernel compilation can be found at -

• Bwimage package ftp://ftp.ipp.mpg.de/pub/ipp/wls/linux/bwimage-0.1.tgz
• See also http://www.patoche.org/LTT/net/00000096.html
• LanWorks BootWare Boot ROMs http://www.3com.com/lanworks

Refer to the README file for installation details. Currently, only "zImage"-type kernels are supported. Unfortunately, kernel parameters are ignored.

This section courtesy of Jochen Kmietsch email to - [email protected] for any questions.

Партнёры:

Хостинг: