The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

Next Previous Contents

1. Introduction

Ethernet bridges connect two or more distinct ethernet segments transparently.
An ethernet bridge distributes ethernet frames coming in on one port to other ports associated to the bridge interface. This is accomplished with brain: Whenever the bridge knows on which port the MAC address to which the frame is to be delivered is located it forwards this frame only to this only port instead of polluting all ports together.
Ethernet interfaces can be added to an existing bridge interface and become then (logical) ports of the bridge interface.
Putting a netfilter structure on top of a bridge interface renders the bridge capable of servicing filtering mechanisms. This way, a transparent filtering instance can be created. It even needs no IP address assigned to work. Of course, you can assign an IP address to the bridge interface for maintenance purposes ( certainly, with ssh only ;-).
The advantage of this system is evident. Transparency alleviates the network administrator of the pain of restructuring the network topology. And users may not notice the existence of the bridge but their connection beeing blocked. Also, users are not disturbed while working (think of a company where network connection loss pays alot).
The other common case is a client beeing connected to the global web via a leased router. As the providers seldomly grant administration privileges on their leasing hardware, the client cannot change the interconnecting configuration. But, of course, the client has a network running, and wants to spend at least as possible, he does not want to reconfigure his entire network. And he does not need to if he uses a bridging device.


Next Previous Contents


Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру