4. Preparing for the Installation
This is the longest section and so it should be: after careful planning the installation itself should be an easy task.
4.1. Ingres Environment Variables
You will use Ingres environment variables to determine where to put further elements (besides the software itself) of the Ingres installation. These variables, unlike II_SYSTEM, are not shell variables but rather parameters of Ingres stored in a file. Some of them can be changed at any time after the installation, but altering the value of others requires a whole re-install. Later you will see which of them are of this "stable" nature.
During installation, you can choose between setting these variables manually or letting the installer set them to their default values (Express Install option).
In the following, we will take the relevant Ingres environment variables one by one and see what each of them is good for. It may help if you put their planned values on paper. You can find an Installation Worksheet in the Getting Started Guide which you can print out and use for this purpose.
4.2. II_LOG_FILE and II_DUAL_LOG
Ingres uses an installation-wide transaction log file to record information on all changes made to any database. This information broadly consists of:
Before images of updated or deleted rows. These are necessary for rolling back uncommitted transactions, should it be required (undo).
The changes made to database objects. Recording them makes it possible to redo committed transactions after a system crash if the new data had not been written to the database prior the crash.
The transaction log resides in the II_LOG_FILE/ingres/log directory, where II_LOG_FILE is an Ingres environment variable. The name of the log file is ingres_log.
Express Install creates a log file of the minimum possible size, 16 Mb. Such a log file may not be large enough even in a development system. If you have free disk space and choose manual install (in which case you can specify the size of the log), set it to something much larger.
Both the location and the size of the log file can be changed at any time after installation. The method of doing this is described in the System Reference Guide.
You also have to decide if you want dual logging (mirroring the transaction log). If the log gets corrupted for any reason, Ingres stops and you have to recover your databases from backup. Therefore, in a live system, it is almost compulsory either to have some type of RAID protection of the log or to have it mirrored by Ingres. If you use dual logging, the copy of the log file can be found under II_DUAL_LOG/ingres/log. Its name is dual_log.
In a development or test environment, mirroring the log is not always necessary.
4.3. Database Locations
There can be any number of databases in an Ingres installation. A database, on the other hand, consists of files of different types. These are:
Control file: it stores certain basic information about the database. You can see this information with the infodb command after you have completed the installation.
Data files: every system table, user table, and also every index goes in a separate file.
Checkpoint files: checkpoint is the term Ingres uses for a database backup. A backup can consist of more than file.
Dump files: online backups are possible in Ingres, that is, the database may be in use while the backup program is running. For this reason, the database may change while it is being checkpointed. Ingres, so that it can restore the database to the state it was in at the beginning of the backup, saves the before images of those data blocks (pages) that have changed during the backup process. These pages are saved in the dump files.
Journal files: from time to time, Ingres writes the records of committed transactions from the log file to journal files (at least, this is the default behavior: journalling may be set off at the database or table level). The frequency of the journalling activity is a tunable function of the amount of information that is written to the transaction log. Journalling protects the installation against media failures: if the disk containing the database crashes, you can restore the last (just before the failure occurred) committed state of the database using a backup (checkpoint) of the database and the journals created after that checkpoint was taken. If you lose the log disk, you can restore the last committed state the database was in at the time the last journal file was written.
Work files: Ingres, if it needs to sort large volumes of data, creates temporary files on disk.
The files constituting a database reside in different directories, according to their types. These directories are specified indirectly, by means of Ingres locations.
There are five location types:
Data location: place for data files of a database. A database can have more than one data location (adding data locations to a database is called extending the database). However, every database has a primary data location. The system tables and the control file always reside in the primary location. When creating a table, if you do not specify the location(s) to put it in, it will be placed in the primary data location of the database.
Checkpoint location: by default, backups are created here. Not necessarily, however: the ckpdb command allows you to specify an arbitrary place for the backup, this way you can checkpoint a database directly to tape as well.
Dump location: for dump files.
Journal location: this is where the journal files for a database reside.
Work location: Ingres creates temporary sort files in this location. Just like with data locations, a database may have more than one work location. If this is the case, Ingres, by default, uses all of them for each sort operation.
Let us see how these locations work in practice. Say we have a database, called test, with the following locations:
DATALOC1: data location --> /opt
CKPLOC: checkpoint location --> /opt
DMPLOC: dump location --> /opt
JRNLLOC: journal location --> /opt
WORKLOC1: work location --> /opt
Every location of the test database points to the /opt directory. Elements of the database go in these directories:
data files: /opt/ingres/data/default/test
checkpoint files: /opt/ingres/ckp/default/test
dump files: /opt/ingres/dmp/default/test
journal files: /opt/ingres/jnl/default/test
temporary files: /opt/ingres/work/default/test
Let us suppose now, that we extend the database to the following locations:
DATALOC2: data location --> /opt
DATALOC3: data location --> /disk2
WORKLOC2: work location --> /disk2
The database is effectively extended to the following directories:
data files: /disk2/ingres/data/default/test
temporary files: /disk2/ingres/work/default/test
DATALOC2 points to /opt, just like DATALOC1. Tables to be created in location DATALOC2 will go to /opt/ingres/data/default/test, the same directory where tables created in location DATALOC1 reside.
As is apparent from the example, we could have created just one location for DATALOC1, DATALOC2, CKPLOC, DMPLOC, JRNLLOC, and WORKLOC1.
Summarizing the main points about locations:
Every location points to the root of a directory tree.
More than one location can point to the same directory.
A location can be used for storing different types of files.
Databases can share locations. You can see from the example why this is true: the name of the database becomes part of the directory tree, hence files of different databases never mix.
4.4. The iidbdb Database
Every Ingres installation has a master database called iidbdb. Ingres stores information about users, locations and user databases in this database. iidbdb is created by the installer.
You have to set the locations for iidbdb during installation. These locations are stored in the following Ingres environment variables:
II_DATABASE: data location
II_CHECKPOINT: checkpoint location
II_DUMP: dump location
II_JOURNAL: journal location
II_WORK: work location
These variables determine the default locations for every user database as well, if you do not override them when creating those databases. See Creating and Destroying Databases for more information.
 | Changing the value of II_DATABASE, II_CHECKPOINT, II_DUMP, II_JOURNAL, or II_WORK requires a complete re-install of Ingres. |
Let us see these variables one by one.
4.5. II_DATABASE
II_DATABASE determines the data location of iidbdb. Its default value is $II_SYSTEM (in case of a manual install you can enter a different value for II_DATABASE, while Express Install inevitably sets it to $II_SYSTEM).
The size of iidbdb after the installation is somewhat more than 5 Mb. It can only grow significantly if you create hundreds of Ingres users, databases or locations.
4.6. II_CHECKPOINT
II_CHECKPOINT contains the value for the checkpoint location of iidbdb. By default, it is also set to $II_SYSTEM.
The size of a checkpoint is just about the same as that of the database itself (at least until you modify the template file of the checkpoint program: it is possible, as you will see in Backup and Recovery). The installer takes the first checkpoint of iidbdb.
If you plan to place checkpoints of user databases under II_CHECKPOINT then you have to provide for more space here.
A further factor that must be taken into account is how long you want to keep backups. When starting the checkpoint program, you can request the deletion of older backups if you do not have too much free space.
4.7. II_DUMP
II_DUMP determines the dump location of the iidbdb database. By default, its value equals to that of II_CHECKPOINT.
By the end of the installation process, II_DUMP will contain a very small amount of data. If you always create checkpoints off-line then you will not need much space here.
4.8. II_JOURNAL
II_JOURNAL contains the value for the journal location of the iidbdb database. Its default value is the same as II_CHECKPOINT's.
The first checkpoint, taken by the installer causes the first, small journal file to appear here. If you do not use different journal locations for user databases then the necessary amount of free space under II_JOURNAL depends on three factors:
Whether you want Ingres to journal at all. If you take checkpoints of your databases regularly and do not mind losing the changes you have made to them since the latest checkpoint, you may switch off journalling. Naturally, running a live system without journalling is usually not acceptable.
If journalling is switched on, then the growth rate of the journal area is determined by the volume of changes made to the databases. Frequent, large updates require quite a bit of space under II_JOURNAL.
The third factor is, how long you wish to keep old journal files. If, when taking a checkpoint, you instruct ckpdb to delete the old checkpoints, then previous journal files will be removed as well.
4.9. II_WORK
II_WORK determines the work location of the iidbdb database. It also defaults to II_CHECKPOINT.
The problem of sizing the work location only arises if II_WORK serves as a work location for user databases as well. It is next to impossible to estimate the temporary disk space that will be needed here; however, having the size of the largest table multiplied by three should work as a starting point.
Remember that a database can have more than one work location. If the original location turns out too small, you can always extend the database to further work locations.
4.10. Other Ingres Environment Variables
Besides the Ingres environment variables that determine locations there are a couple more that you have to set during installation (or have Express Install set them to their default value). These are:
II_INSTALLATION: a two-character code, identifying the installation. Every Ingres installation on a machine must have its own, unique, installation code. The default value for II_INSTALLATION is II. Once set, it cannot be changed.
II_NUM_OF_PROCESSORS: number of processors in the machine. By default, it is 1. If you set it to a higher value, Ingres will use spin-locks when accessing the database cache. If you do not know what spin-locks are, do not bother. The point is to set II_NUM_OF_PROCESSORS to 2 if you have a multiprocessor machine. Its value can be changed at any time later.
II_CHARSET: this variable determines the code set of all character data stored in all databases you will create in the installation. Its default value is ISO88591. Perhaps it is not surprising that changing it to a different value after installation may corrupt data stored in your existing databases. Since the iidbdb database is created by the installer program, you should not choose Express Install if ISO88591 does not suit you.
II_TIMEZONE_NAME: name of the time zone, by default NA-PACIFIC. During manual install you can select its value from a list of valid codes. Ingres stores all date and time values in GMT and adjusts them according to II_TIMEZONE_NAME when communicating with the client. Therefore, if you set II_TIMEZONE_NAME to a different value, you will see all date-time values in the databases change. For this reason, set this variable to its final value before creating the first user database.
The (manual) installer prompts you for the value of two further parameters which are not Ingres environment variables:
Expected number of concurrent users in the system: this is 32 by default. Based on this number, the installer sets the value of a number of other parameters, such as the size of the database cache. These derived parameters can later be adjusted.
SQL-92 compatible databases: by default, Ingres databases differ from the SQL-92 standard in some ways. For example, object names not protected by single or double quotes are converted to lower case rather than upper case. You can find the other differences in the SQL Reference Guide.
After you have made up your mind on the values of all installation parameters, you know whether the default values for those variables that cannot be changed after installation are acceptable to you. If they are, you can choose Express Install.
