Партнёры:
Хостинг:
The C `char' type is 8-bit and will stay 8-bit because it denotes
the smallest addressable data unit. Various facilities are available:
The ISO/ANSI C standard contains, in an amendment which was added in 1995,
a "wide character" type `wchar_t', a set of functions like those
found in <string.h> and <ctype.h> (declared in
<wchar.h> and <wctype.h>, respectively), and
a set of conversion functions between `char *' and
`wchar_t *' (declared in <stdlib.h>).
Good references for this API are
Advantages of using this API:
setlocale(LC_ALL,"");.Drawbacks of this API:
A `wchar_t' may or may not be encoded in Unicode; this is
platform and sometimes also locale dependent. A multibyte sequence
`char *' may or may not be encoded in UTF-8; this is platform
and sometimes also locale dependent.
In detail, here is what the
Single Unix specification
says about the `wchar_t' type:
All wide-character codes in a given process consist of an equal number
of bits. This is in contrast to characters, which can consist of a
variable number of bytes. The byte or byte sequence that represents a
character can also be represented as a wide-character code.
Wide-character codes thus provide a uniform size for manipulating text
data. A wide-character code having all bits zero is the null
wide-character code, and terminates wide-character strings. The
wide-character value for each member of the Portable Character Set (i.e. ASCII) will equal its value when used as the lone character in an integer
character constant. Wide-character codes for other characters are
locale- and implementation-dependent. State shift bytes do not have a
wide-character code representation.
One particular consequence is that in portable programs you shouldn't use
non-ASCII characters in string literals. That means, even though you
know the Unicode double quotation marks have the codes U+201C and U+201D,
you shouldn't write a string literal L"\u201cHello\u201d, he said"
or "\xe2\x80\x9cHello\xe2\x80\x9d, he said" in C programs. Instead,
use GNU gettext, write it as gettext("'Hello', he said"), and create
a message database en.po which translates "'Hello', he said" to
"\u201cHello\u201d, he said".
Here is a survey of the portability of the ISO/ANSI C facilities on various Unix flavours.
As a consequence, I recommend to use the restartable and multithread-safe wcsr/mbsr functions, forget about those systems which don't have them (Irix, HP-UX, AIX), and use the UTF-8 locale plug-in libutf8_plug.so (see below) on those systems which permit you to compile programs which use these wcsr/mbsr functions (Linux, Solaris, OSF/1).
A similar advice, given by Sun in http://www.sun.com/software/white-papers/wp-unicode/, section "Internationalized Applications with Unicode", is:
To properly internationalize an application, use the following guidelines:
If, for some reason, in some piece of code, you really have to assume that
`wchar_t' is Unicode (for example, if you want to do special treatment of
some Unicode characters), you should make that piece of code conditional
upon the result of is_locale_utf8(). Otherwise you will mess up
your program's behaviour in different locales or other platforms. The
function is_locale_utf8 is declared in
utf8locale.h
and defined in
utf8locale.c.
A portable implementation of the ISO/ANSI C API, which supports 8-bit locales and UTF-8 locales, can be found in libutf8-0.7.3.tar.gz.
Advantages:
The Plan9 operating system, a variant of Unix, uses UTF-8 as character
encoding in all applications. Its wide character type is called
`Rune', not `wchar_t'. Parts of its libraries, written by
Rob Pike and Howard Trickey, are available at
ftp://ftp.cdrom.com/pub/netlib/research/9libs/9libs-1.0.tar.gz.
Another similar library, written by Alistair G. Crooks, is
ftp://ftp.cdrom.com/pub/NetBSD/packages/distfiles/libutf-2.10.tar.gz.
In particular, each of these libraries contains an UTF-8 aware regular
expression matcher.
Drawback of this API:
The Qt-2.0 library http://www.troll.no/ contains a fully-Unicode QString class. You can use the member functions QString::utf8 and QString::fromUtf8 to convert to/from UTF-8 encoded text. The QString::ascii and QString::latin1 member functions should not be used any more.
The previously mentioned libraries implement Unicode aware versions of the ASCII concepts. Here are libraries which deal with Unicode concepts, such as titlecase (a third letter case, different from uppercase and lowercase), distinction between punctuation and symbols, canonical decomposition, combining classes, canonical ordering and the like.
The ucdata library by Mark Leisher http://crl.nmsu.edu/~mleisher/ucdata.html deals with character properties, case conversion, decomposition, combining classes. The companion package ure-0.5 http://crl.nmsu.edu/~mleisher/ure-0.5.tar.gz is a Unicode regular expression matcher.
The ustring C++ library by Rodrigo Reyes http://ustring.charabia.net/ deals with character properties, case conversion, decomposition, combining classes, and includes a Unicode regular expression matcher.
International Components for Unicode http://oss.software.ibm.com/icu/. IBM's very comprehensive internationalization library featuring Unicode strings, resource bundles, number formatters, date/time formatters, message formatters, collation and more. Lots of supported locales. Portable to Unix and Win32, but compiles out of the box only on Linux libc6, not libc5.
The GNOME libunicode library http://cvs.gnome.org/lxr/source/libunicode/ by Tom Tromey and others. It covers character set conversion, character properties, decomposition.
Two kinds of conversion libraries, which support UTF-8 and a large number of 8-bit character sets, are available:
The iconv implementation by Ulrich Drepper, contained in the GNU glibc-2.2. ftp://ftp.gnu.org/pub/gnu/glibc/glibc-2.2.tar.gz. The iconv manpages are now contained in ftp://ftp.win.tue.nl/pub/linux-local/manpages/man-pages-1.29.tar.gz.
The portable iconv implementation by Bruno Haible. ftp://ftp.ilog.fr/pub/Users/haible/gnu/libiconv-1.5.1.tar.gz
The portable iconv implementation by Konstantin Chuguev. <[email protected]> ftp://ftp.urc.ac.ru/pub/local/OS/Unix/converters/iconv-0.4.tar.gz
Advantages:
librecode by François Pinard ftp://ftp.gnu.org/pub/gnu/recode/recode-3.6.tar.gz.
Advantages:
Drawbacks:
International Components for Unicode 1.7
http://oss.software.ibm.com/icu/.
IBM's internationalization library also has conversion facilities, declared
in `ucnv.h'.
Advantages:
Drawbacks:
libutf-8 by G. Adam Stanislav <[email protected]> contains a few functions for on-the-fly conversion from/to UTF-8 encoded `FILE*' streams. http://www.whizkidtech.net/i18n/libutf-8-1.0.tar.gz
Advantages:
Drawbacks:
Java has Unicode support built into the language. The type `char' denotes a Unicode character, and the `java.lang.String' class denotes a string built up from Unicode characters.
Java can display any Unicode characters through its windowing system AWT, provided that 1. you set the Java system property "user.language" appropriately, 2. the /usr/lib/java/lib/font.properties.language font set definitions are appropriate, and 3. the fonts specified in that file are installed. For example, in order to display text containing japanese characters, you would install japanese fonts and run "java -Duser.language=ja ...". You can combine font sets: In order to display western european, greek and japanese characters simultaneously, you would create a combination of the files "font.properties" (covers ISO-8859-1), "font.properties.el" (covers ISO-8859-7) and "font.properties.ja" into a single file. ??This is untested??
The interfaces java.io.DataInput and java.io.DataOutput have methods called `readUTF' and `writeUTF' respectively. But note that they don't use UTF-8; they use a modified UTF-8 encoding: the NUL character is encoded as the two-byte sequence 0xC0 0x80 instead of 0x00, and a 0x00 byte is added at the end. Encoded this way, strings can contain NUL characters and nevertheless need not be prefixed with a length field - the C <string.h> functions like strlen() and strcpy() can be used to manipulate them.
The Common Lisp standard specifies two character types: `base-char' and `character'. It's up to the implementation to support Unicode or not. The language also specifies a keyword argument `:external-format' to `open', as the natural place to specify a character set or encoding.
Among the free Common Lisp implementations, only CLISP
http://clisp.cons.org/
supports Unicode. You need a CLISP version from March 2000 or newer.
ftp://clisp.cons.org/pub/lisp/clisp/source/clispsrc.tar.gz.
The types `base-char' and `character' are both equivalent to 16-bit Unicode.
The functions char-width and string-width provide an
API comparable to wcwidth() and wcswidth().
The encoding used for file or socket/pipe I/O can be specified through the
`:external-format' argument. The encodings used for tty I/O and the default
encoding for file/socket/pipe I/O are locale dependent.
Among the commercial Common Lisp implementations:
LispWorks http://www.xanalys.com/software_tools/products/ supports Unicode. The type `base-char' is equivalent to ISO-8859-1, and the type `simple-char' (subtype of `character') contains all Unicode characters. The encoding used for file I/O can be specified through the `:external-format' argument, for example '(:UTF-8). Limitations: Encodings cannot be used for socket I/O. The editor cannot edit UTF-8 encoded files.
Eclipse http://www.elwood.com/eclipse/eclipse.htm supports Unicode. See http://www.elwood.com/eclipse/char.htm. The type `base-char' is equivalent to ISO-8859-1, and the type `character' contains all Unicode characters. The encoding used for file I/O can be specified through a combination of the `:element-type' and `:external-format' arguments to `open'. Limitations: Character attribute functions are locale dependent. Source and compiled source files cannot contain Unicode string literals.
The commercial Common Lisp implementation Allegro CL, in version 6.0, has
Unicode support. The types `base-char' and `character' are both equivalent
to 16-bit Unicode. The encoding used for file I/O can be specified through the
`:external-format' argument, for example :external-format :utf8.
The default encoding is locale dependent. More details are at
http://www.franz.com/support/documentation/6.0/doc/iacl.htm.
Ada95 was designed for Unicode support and the Ada95 standard library features special ISO 10646-1 data types Wide_Character and Wide_String, as well as numerous associated procedures and functions. The GNU Ada95 compiler (gnat-3.11 or newer) supports UTF-8 as the external encoding of wide characters. This allows you to use UTF-8 in both source code and application I/O. To activate it in the application, use "WCEM=8" in the FORM string when opening a file, and use compiler option "-gnatW8" if the source code is in UTF-8. See the GNAT ( ftp://cs.nyu.edu/pub/gnat/) and Ada95 ( ftp://ftp.cnam.fr/pub/Ada/PAL/userdocs/docadalt/rm95/index.htm) reference manuals for details.
Python 2.0
(
http://www.python.org/2.0/,
http://www.python.org/pipermail/python-announce-list/2000-October/000889.html,
http://starship.python.net/crew/amk/python/writing/new-python/new-python.html)
contains Unicode support. It has a new fundamental data type
`unicode', representing a Unicode string, a module `unicodedata' for the
character properties, and a set of converters for the most important encodings.
See
http://starship.python.net/crew/lemburg/unicode-proposal.txt,
or the file Misc/unicode.txt in the distribution, for details.
Since JavaScript version 1.3, strings are always Unicode. There is no character type, but you can use the \uXXXX notation for Unicode characters inside strings. No normalization is done internally, so it expects to receive Unicode Normalization Form C, which the W3C recommends. See http://developer.netscape.com/docs/manuals/communicator/jsref/js13.html#Unicode for details and http://developer.netscape.com/docs/javascript/e262-pdf.pdf for the complete ECMAscript specification.
Tcl/Tk started using Unicode as its base character set with version 8.1. Its internal representation for strings is UTF-8. It supports the \uXXXX notation for Unicode characters. See http://dev.scriptics.com/doc/howto/i18n.html.
Perl 5.6 stores strings internally in UTF-8 format, if you write
use utf8;
length() returns the number of
characters of a string. For details, see the Perl-i18n FAQ at
http://rf.net/~james/perli18n.html.
Support for other (non-8-bit) encodings is available through the iconv interface module http://cpan.perl.org/modules/by-module/Text/Text-Iconv-1.1.tar.gz.
Tomohiro Kubota has written an introduction to internationalization http://www.debian.org/doc/manuals/intro-i18n/. The emphasis of his document is on writing software that runs in any locale, using the locale's encoding.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |