Партнёры:
Хостинг:
Virtual mail support is in ever increasing demand. Sendmail says it supports virtual mail. What it does support is listening for incoming mail from different domains. You can then specify to have the mail forwarded somewhere. However, if you forward it to the local machine and have incoming mail to [email protected] and [email protected] they will go to the same mail folder. This is a problem since both bob's are different people with different mail.
You can make sure that each user name is unique by using a numbering scheme: bob1, bob2, etc or prepending a few characters to each username dom1bob, dom2bob, etc. You could also hack mail and pop to do these conversions behind the scenes but that can get messy. Outgoing mail also has the banner maindomain.com and you want each subdomain's outgoing mail banner to be different.
I have two solutions. One works with sendmail and one works with Qmail. The solution with sendmail should work with a stock install of sendmail. However, it shares all the limitations built into sendmail. It also requires that one sendmail has to be run in queue mode for each domain. Having 50 or more sendmail queue processes that wake up every hour can put a little strain on a machine.
The solution offered with Qmail does not require multiple instances of Qmail and can run out of one queue directory. It does require an extra program since Qmail does not rely on virtuald. I believe a similar procedure can be done with sendmail. However, Qmail lends itself to this solution more readily.
I do not endorse any one program over the other. The sendmail install is a little more straight forward but Qmail is probably the more powerful of the two mail server packages.
Each virtual filesystem gives a domain its own /etc/passwd. This means that [email protected] and [email protected] are different users in different /etc/passwds so mail will be no problem. They also have their own spool directories so the mail folders will be different files on different virtual filesystems.
Create /etc/sendmail.cf like you would normally through m4. I used:
divert(0) VERSIONID(`tcpproto.mc') OSTYPE(linux) FEATURE(redirect) FEATURE(always_add_domain) FEATURE(use_cw_file) FEATURE(local_procmail) MAILER(local) MAILER(smtp)
Edit /virtual/domain1.com/etc/sendmail.cf to respond as your virtual domain:
vi /virtual/domain1.com/etc/sendmail.cf # Approximately Line 86 It should say: #Dj$w.Foo.COM Replace it with: Djdomain1.com
Edit /virtual/domain1.com/etc/sendmail.cw with the local hostnames.
vi /virtual/domain1.com/etc/sendmail.cw mail.domain1.com domain1.com domain1 localhost
However, sendmail requires one minor source code modification. Sendmail has a file called /etc/sendmail.cw and it contains all machine names that sendmail will deliver mail to locally rather than forwarding to another machine. Sendmail does internal checking of all the devices on the machine to initialize this list with the local IPs. This presents a problem if you are mailing between virtual domains on the same machine. Sendmail will be fooled into thinking another virtual domain is a local address and spool the mail locally. For example, [email protected] sends mail to [email protected]. Since domain1.com's sendmail thinks domain2.com is local, it will spool the mail on domain1.com and never send it to domain2.com. You have to modify sendmail (I did this on v8.8.5 without a problem):
vi v8.8.5/src/main.c # Approximately Line 494 It should say: load_if_names(); Replace it with: /* load_if_names(); Commented out since hurts virtual */
Note only do this if you need to send mail between virtual domains which I think is probable.
This will fix the problem. However, the main ethernet device eth0 is not removed. Therefore, if you send mail from a virtual IP to the one on eth0 on the same box it will delivery locally. Therefore, I just use this as a dummy IP virtual1.maindomain.com (10.10.10.157). I never send mail to this host so neither will the virtual domains. This is also the IP I would use to ssh into the box to check if the system is ok.
As of Sendmail V8.8.6, there is a new option to disable loading of the
extra network interfaces. This means you do NOT have to alter the
code in any way. It is called DontProbeInterfaces .
Edit /virtual/domain1.com/etc/sendmail.cf
vi /virtual/domain1.com/etc/sendmail.cf # Add the line O DontProbeInterfaces=True
Sendmail cannot be started stand alone anymore so you have to
run it through inetd. This is inefficient and will result in
lower start up time but if you had such a high hit site you would
not share it on a virtual box with other domains. Note that you
are NOT running with the -bd flag. Also note that
you need a sendmail -q running for each domain to
queue up undelivered mail. The new sendmail.init file:
#!/bin/sh
. /etc/rc.d/init.d/functions
case "$1" in
start)
echo -n "Starting sendmail: "
daemon sendmail -q1h
echo
echo -n "Starting virtual sendmail: "
for i in /virtual/*
do
if [ ! -d "$i" ]
then
continue
fi
if [ "$i" = "/virtual/lost+found" ]
then
continue
fi
chroot $i sendmail -q1h
echo -n "."
done
echo " done"
touch /var/lock/subsys/sendmail
;;
stop)
echo -n "Stopping sendmail: "
killproc sendmail
echo
rm -f /var/lock/subsys/sendmail
;;
*)
echo "Usage: sendmail {start|stop}"
exit 1
esac
exit 0
Pop should install normally with no extra effort. It will just need the inetd entry for it with the virtuald part added. The inetd.conf entries for sendmail and pop:
pop-3 stream tcp nowait root /usr/local/bin/virtuald \
virtuald /virtual/conf.pop in.qpop -s
smtp stream tcp nowait root /usr/local/bin/virtuald \
virtuald /virtual/conf.mail sendmail -bs
This solution takes over the delivery responsibilities of qmail-local, so use of the .qmail files in the virtual home directories will not work. However, each domain will still get a domain master user that will control aliasing for the whole domain. Two external programs will be used for that domain masters .qmail-default file. The mail will be passed through these two programs in order to deliver mail for each domain.
Two programs are required since one of them is run setuid root. It is a small program that changes to a non-root user and then runs the second program. Consult your nearest security related site for a discussion as to why this is necessary.
This solution bypasses the need for using virtuald. Qmail is flexible enough to not require a general virtuald setup. Qmail's design utilizes the chaining of programs together to deliver mail. This design makes it very easy to insert the virtual section into the Qmail delivery process without altering a stock install of Qmail.
A note that since you are using one Qmail any unqualified domain name will be expanded with the domain of the main server. This is because you do not have a separate Qmail server for each domain. Therefore, make sure that your client (Eudora, elm, mutt, etc.) knows to expand all of your unqualified domain names.
Qmail has to be configured to accept mail for each of the virtual domains you will be serving. Type the following commands.
echo "domain1.com:domain1" >> /var/qmail/control/virtualdomains
Add to your main /etc/passwd file the user domain1. I would make the shell /bin/false so that the domain master cannot log in. That user will be able to add .qmail files and all mail for domain1 will route through that account. Note that usernames can only be eight characters long and domain names can be longer. The remaining characters are truncated. That means that user domain12 and domain123 are going to be the same user and Qmail might get confused. So be careful in your master domain user naming convention.
Create the domain master's .qmail files with the following commands. Add any other system aliases at this point. For example, webmaster or hostmaster.
echo "[email protected]" > /home/d/domain1/.qmail-mailer-daemon echo "[email protected]" > /home/d/domain1/.qmail-postmaster echo "[email protected]" > /home/d/domain1/.qmail-root
Create the domain master's .qmail-default file. This will filter all mail to the virtual domain.
echo "| /usr/local/bin/virtmailfilter" > /home/d/domain1/.qmail-default
Qmail requires a special pop that can support the Maildir format. The pop program has to be virtualized. The author of Qmail recommends using tcpserver (an inetd replacement) with Qmail so my examples use tcpserver and NOT inetd.
Tcpserver does not require a config file. All the information can be passed to it via the command line. Here is the tcpserver.init file that you would use for the mail daemon and popper:
#!/bin/sh
. /etc/rc.d/init.d/functions
QMAILDUSER=`grep qmaild /etc/passwd | cut -d: -f3`
QMAILDGROUP=`grep qmaild /etc/passwd | cut -d: -f4`
# See how we were called.
case "$1" in
start)
echo -n "Starting tcpserver: "
tcpserver -u 0 -g 0 0 pop-3 /usr/local/bin/virtuald \
/virtual/conf.pop qmail-popup virt.domain1.com \
/bin/checkpassword /bin/qmail-pop3d Maildir &
echo -n "pop "
tcpserver -u $QMAILDUSER -g $QMAILDGROUP 0 smtp \
/var/qmail/bin/qmail-smtpd &
echo -n "qmail "
echo
touch /var/lock/subsys/tcpserver
;;
stop)
echo -n "Stopping tcpserver: "
killall -TERM tcpserver
echo -n "killing "
echo
rm -f /var/lock/subsys/tcpserver
;;
*)
echo "Usage: tcpserver {start|stop}"
exit 1
esac
exit 0
You can use the standard Qmail init script provided. Qmail comes with very good documentation describing how to set this up.
You require two other programs to get virtual mail working with Qmail. They are virtmailfilter and virtmaildelivery. This is the C source to virtmailfilter. It should be installed in /usr/local/bin with permissions 4750, user root, and group nofiles.
#include <sys/wait.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
#include <pwd.h>
#define VIRTPRE "/virtual"
#define VIRTPWFILE "etc/passwd"
#define VIRTDELIVERY "/usr/local/bin/virtmaildelivery"
#define VIRTDELIVERY0 "virtmaildelivery"
#define PERM 100
#define TEMP 111
#define BUFSIZE 8192
int main(int argc,char **argv)
{
char *username,*usernameptr,*domain,*domainptr,*homedir;
char virtpath[BUFSIZE];
struct passwd *p;
FILE *fppw;
int status;
gid_t gid;
pid_t pid;
if (!(username=getenv("EXT")))
{
fprintf(stdout,"environment variable EXT not set\n");
exit(TEMP);
}
for(usernameptr=username;*usernameptr;usernameptr++)
{
*usernameptr=tolower(*usernameptr);
}
if (!(domain=getenv("HOST")))
{
fprintf(stdout,"environment variable HOST not set\n");
exit(TEMP);
}
for(domainptr=domain;*domainptr;domainptr++)
{
if (*domainptr=='.' && *(domainptr+1)=='.')
{
fprintf(stdout,"environment variable HOST has ..\n");
exit(TEMP);
}
if (*domainptr=='/')
{
fprintf(stdout,"environment variable HOST has /\n");
exit(TEMP);
}
*domainptr=tolower(*domainptr);
}
for(domainptr=domain;;)
{
snprintf(virtpath,BUFSIZE,"%s/%s",VIRTPRE,domainptr);
if (chdir(virtpath)>=0)
break;
if (!(domainptr=strchr(domainptr,'.')))
{
fprintf(stdout,"domain failed: %s\n",domain);
exit(TEMP);
}
domainptr++;
}
if (!(fppw=fopen(VIRTPWFILE,"r+")))
{
fprintf(stdout,"fopen failed: %s\n",VIRTPWFILE);
exit(TEMP);
}
while((p=fgetpwent(fppw))!=NULL)
{
if (!strcmp(p->pw_name,username))
break;
}
if (!p)
{
fprintf(stdout,"user %s: not exist\n",username);
exit(PERM);
}
if (fclose(fppw)==EOF)
{
fprintf(stdout,"fclose failed\n");
exit(TEMP);
}
gid=p->pw_gid;
homedir=p->pw_dir;
if (setgid(gid)<0 || setuid(p->pw_uid)<0)
{
fprintf(stdout,"setuid/setgid failed\n");
exit(TEMP);
}
switch(pid=fork())
{
case -1:
fprintf(stdout,"fork failed\n");
exit(TEMP);
case 0:
if (execl(VIRTDELIVERY,VIRTDELIVERY0,username,homedir,NULL)<0)
{
fprintf(stdout,"execl failed\n");
exit(TEMP);
}
default:
if (wait(&status)<0)
{
fprintf(stdout,"wait failed\n");
exit(TEMP);
}
if (!WIFEXITED(status))
{
fprintf(stdout,"child did not exit normally\n");
exit(TEMP);
}
break;
}
exit(WEXITSTATUS(status));
}
You require two other programs to get virtual mail working with Qmail. They are virtmailfilter and virtmaildelivery. This is the C source to virtmaildelivery. It should be installed in /usr/local/bin with permissions 0755, user root, and group root.
#include <sys/stat.h>
#include <sys/file.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdio.h>
#include <errno.h>
#include <time.h>
#define TEMP 111
#define BUFSIZE 8192
#define ATTEMPTS 10
int main(int argc,char **argv)
{
char *user,*homedir,*dtline,*rpline,buffer[BUFSIZE],*p,mail[BUFSIZE];
char maildir[BUFSIZE],newmaildir[BUFSIZE],host[BUFSIZE];
int fd,n,nl,i,retval;
struct stat statp;
time_t thetime;
pid_t pid;
FILE *fp;
retval=0;
if (!argv[1])
{
fprintf(stdout,"invalid arguments: need username\n");
exit(TEMP);
}
user=argv[1];
if (!argv[2])
{
fprintf(stdout,"invalid arguments: need home directory\n");
exit(TEMP);
}
homedir=argv[2];
if (!(dtline=getenv("DTLINE")))
{
fprintf(stdout,"environment variable DTLINE not set\n");
exit(TEMP);
}
if (!(rpline=getenv("RPLINE")))
{
fprintf(stdout,"environment variable RPLINE not set\n");
exit(TEMP);
}
while (*homedir=='/')
homedir++;
snprintf(maildir,BUFSIZE,"%s/Maildir",homedir);
if (chdir(maildir)<0)
{
fprintf(stdout,"chdir failed: %s\n",maildir);
exit(TEMP);
}
time(&thetime);
pid=getpid();
if (gethostname(host,BUFSIZE)<0)
{
fprintf(stdout,"gethostname failed\n");
exit(TEMP);
}
for(i=0;i<ATTEMPTS;i++)
{
snprintf(mail,BUFSIZE,"tmp/%u.%d.%s",thetime,pid,host);
errno=0;
stat(mail,&statp);
if (errno==ENOENT)
break;
sleep(2);
time(&thetime);
}
if (i>=ATTEMPTS)
{
fprintf(stdout,"could not create %s\n",mail);
exit(TEMP);
}
if (!(fp=fopen(mail,"w+")))
{
fprintf(stdout,"fopen failed: %s\n",mail);
retval=TEMP; goto unlinkit;
}
fd=fileno(fp);
if (fprintf(fp,"%s",rpline)<0)
{
fprintf(stdout,"fprintf failed\n");
retval=TEMP; goto unlinkit;
}
if (fprintf(fp,"%s",dtline)<0)
{
fprintf(stdout,"fprintf failed\n");
retval=TEMP; goto unlinkit;
}
while(fgets(buffer,BUFSIZE,stdin))
{
for(p=buffer;*p=='>';p++)
;
if (!strncmp(p,"From ",5))
{
if (fputc('>',fp)<0)
{
fprintf(stdout,"fputc failed\n");
retval=TEMP; goto unlinkit;
}
}
if (fprintf(fp,"%s",buffer)<0)
{
fprintf(stdout,"fprintf failed\n");
retval=TEMP; goto unlinkit;
}
}
p=buffer+strlen(buffer);
nl=2;
if (*p=='\n')
nl=1;
for(n=0;n<nl;n++)
{
if (fputc('\n',fp)<0)
{
fprintf(stdout,"fputc failed\n");
retval=TEMP; goto unlinkit;
}
}
if (fsync(fd)<0)
{
fprintf(stdout,"fsync failed\n");
retval=TEMP; goto unlinkit;
}
if (fclose(fp)==EOF)
{
fprintf(stdout,"fclose failed\n");
retval=TEMP; goto unlinkit;
}
snprintf(newmaildir,BUFSIZE,"new/%u.%d.%s",thetime,pid,host);
if (link(mail,newmaildir)<0)
{
fprintf(stdout,"link failed: %s %s\n",mail,newmaildir);
retval=TEMP; goto unlinkit;
}
unlinkit:
if (unlink(mail)<0)
{
fprintf(stdout,"unlink failed: %s\n",mail);
retval=TEMP;
}
exit(retval);
}
Thank you Vicente Gonzalez ([email protected]) for helping make the Qmail solution possible. You can certainly mail your thanks to Vince, however all questions and comments including issues regarding Qmail, about this HOWTO should continue to be directed to me.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |