NFS-Root-Client Mini-HOWTO

Ofer Maor

v4.1, 02 Feb, 1999

Revision History
Revision 4.1	Feb 02, 1999	Revised by: mo

The purpose of this Mini-Howto is to explain how to create client root directories on a server that is using NFS Root mounted clients.

Table of Contents

1. Copyright

1.1. Thanks

2. Preface

2.1. General Overview

3. Creating the client's root directory

3.1. Creating the directory tree
3.2. Creating the minimal file system needed for boot
3.3. Building the etc directory and configuring the clients
3.4. Booting Up

4. Creating more clients

1. Copyright

Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions.

All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below.

In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs.

If you have questions, please contact Ofer Maor (<[email protected]>), the author of this mini-HOWTO, or Greg Hankins, the Linux HOWTO coordinator, at <[email protected]> via email, or at +1 404 853 9989.

If you have anything to add to this Mini-Howto, please mail the author (Ofer Maor, <[email protected]>), with the information. Any new relevant information would be appreciated.

1.1. Thanks

I would like to express my thanks to the author of the NFS-Root Howto, Andreas Kostyrca (<[email protected]>). His Mini-Howto helped me with the first steps in creating a NFS Root Mounted client. My Mini-Howto does not, in any way, try to replace his work, but to enhance it using my experiences in this process.

I would also like to thank Mark Kushinsky (<[email protected]>) for polishing the english and spelling of this Howto, thus making it much more readable.

		Next
		Preface