Author: Armin Wolf <[email protected]> Date: Tue Oct 1 23:28:34 2024 +0200 ACPI: battery: Fix possible crash when unregistering a battery hook [ Upstream commit 76959aff14a0012ad6b984ec7686d163deccdc16 ] When a battery hook returns an error when adding a new battery, then the battery hook is automatically unregistered. However the battery hook provider cannot know that, so it will later call battery_hook_unregister() on the already unregistered battery hook, resulting in a crash. Fix this by using the list head to mark already unregistered battery hooks as already being unregistered so that they can be ignored by battery_hook_unregister(). Fixes: fa93854f7a7e ("battery: Add the battery hooking API") Signed-off-by: Armin Wolf <[email protected]> Link: https://patch.msgid.link/[email protected] Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Armin Wolf <[email protected]> Date: Tue Oct 1 23:28:33 2024 +0200 ACPI: battery: Simplify battery hook locking [ Upstream commit 86309cbed26139e1caae7629dcca1027d9a28e75 ] Move the conditional locking from __battery_hook_unregister() into battery_hook_unregister() and rename the low-level function to simplify the locking during battery hook removal. Reviewed-by: Ilpo Järvinen <[email protected]> Reviewed-by: Pali Rohár <[email protected]> Signed-off-by: Armin Wolf <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Stable-dep-of: 76959aff14a0 ("ACPI: battery: Fix possible crash when unregistering a battery hook") Signed-off-by: Sasha Levin <[email protected]>
Author: Rafael J. Wysocki <[email protected]> Date: Thu Jul 4 18:26:54 2024 +0200 ACPI: EC: Do not release locks during operation region accesses [ Upstream commit dc171114926ec390ab90f46534545420ec03e458 ] It is not particularly useful to release locks (the EC mutex and the ACPI global lock, if present) and re-acquire them immediately thereafter during EC address space accesses in acpi_ec_space_handler(). First, releasing them for a while before grabbing them again does not really help anyone because there may not be enough time for another thread to acquire them. Second, if another thread successfully acquires them and carries out a new EC write or read in the middle if an operation region access in progress, it may confuse the EC firmware, especially after the burst mode has been enabled. Finally, manipulating the locks after writing or reading every single byte of data is overhead that it is better to avoid. Accordingly, modify the code to carry out EC address space accesses entirely without releasing the locks. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksandr Mishin <[email protected]> Date: Wed Jul 31 01:53:39 2024 +0300 ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe() [ Upstream commit 07442c46abad1d50ac82af5e0f9c5de2732c4592 ] In tps68470_pmic_opregion_probe() pointer 'dev' is compared to NULL which is useless. Fix this issue by removing unneeded check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e13452ac3790 ("ACPI / PMIC: Add TI PMIC TPS68470 operation region driver") Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Aleksandr Mishin <[email protected]> Reviewed-by: Sakari Ailus <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Werner Sembach <[email protected]> Date: Tue Sep 10 11:40:06 2024 +0200 ACPI: resource: Add another DMI match for the TongFang GMxXGxx commit a98cfe6ff15b62f94a44d565607a16771c847bc6 upstream. Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might have GMxXGxX as the board name instead of GMxXGxx. Adding both to be on the safe side. Signed-off-by: Werner Sembach <[email protected]> Cc: All applicable <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Fri Sep 27 16:16:06 2024 +0200 ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[] commit 056301e7c7c886f96d799edd36f3406cc30e1822 upstream. Like other Asus ExpertBook models the B2502CVA has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the B2502CVA to the irq1_level_low_skip_override[] quirk table to fix this. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217760 Cc: All applicable <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Fri Sep 27 16:16:05 2024 +0200 ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[] commit 2f80ce0b78c340e332f04a5801dee5e4ac8cfaeb upstream. Like other Asus Vivobook models the X1704VAP has its keybopard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the X1704VAP to the irq1_level_low_skip_override[] quirk table to fix this. Reported-by: Lamome Julien <[email protected]> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1078696 Closes: https://lore.kernel.org/all/[email protected]/ Cc: All applicable <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Weißschuh <[email protected]> Date: Tue Jul 9 22:37:24 2024 +0200 ACPI: sysfs: validate return type of _STR method commit 4bb1e7d027413835b086aed35bc3f0713bc0f72b upstream. Only buffer objects are valid return values of _STR. If something else is returned description_show() will access invalid memory. Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description") Cc: All applicable <[email protected]> Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pei Xiao <[email protected]> Date: Thu Jul 18 14:05:48 2024 +0800 ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package() [ Upstream commit a5242874488eba2b9062985bf13743c029821330 ] ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0 ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause NULL pointer dereference later. Link: https://github.com/acpica/acpica/commit/4d4547cf Signed-off-by: Pei Xiao <[email protected]> Link: https://patch.msgid.link/[email protected] [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Armin Wolf <[email protected]> Date: Sun Apr 14 21:50:33 2024 +0200 ACPICA: Fix memory leak if acpi_ps_get_next_field() fails [ Upstream commit e6169a8ffee8a012badd8c703716e761ce851b15 ] ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7 If acpi_ps_get_next_field() fails, the previously created field list needs to be properly disposed before returning the status code. Link: https://github.com/acpica/acpica/commit/12800457 Signed-off-by: Armin Wolf <[email protected]> [ rjw: Rename local variable to avoid compiler confusion ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Armin Wolf <[email protected]> Date: Wed Apr 3 20:50:11 2024 +0200 ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails [ Upstream commit 5accb265f7a1b23e52b0ec42313d1e12895552f4 ] ACPICA commit 2802af722bbde7bf1a7ac68df68e179e2555d361 If acpi_ps_get_next_namepath() fails, the previously allocated union acpi_parse_object needs to be freed before returning the status code. The issue was first being reported on the Linux ACPI mailing list: Link: https://lore.kernel.org/linux-acpi/[email protected]/T/ Link: https://github.com/acpica/acpica/commit/2802af72 Signed-off-by: Armin Wolf <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksandrs Vinarskis <[email protected]> Date: Sun Aug 11 23:33:44 2024 +0200 ACPICA: iasl: handle empty connection_node [ Upstream commit a0a2459b79414584af6c46dd8c6f866d8f1aa421 ] ACPICA commit 6c551e2c9487067d4b085333e7fe97e965a11625 Link: https://github.com/acpica/acpica/commit/6c551e2c Signed-off-by: Aleksandrs Vinarskis <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Thu Aug 8 11:14:42 2024 +0200 ALSA: asihpi: Fix potential OOB array access [ Upstream commit 7b986c7430a6bb68d523dac7bfc74cbd5b44ef96 ] ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jaroslav Kysela <[email protected]> Date: Wed Oct 2 21:46:49 2024 +0200 ALSA: core: add isascii() check to card ID generator commit d278a9de5e1837edbe57b2f1f95a104ff6c84846 upstream. The card identifier should contain only safe ASCII characters. The isalnum() returns true also for characters for non-ASCII characters. Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4135 Link: https://lore.kernel.org/linux-sound/yk3WTvKkwheOon_LzZlJ43PPInz6byYfBzpKkbasww1yzuiMRqn7n6Y8vZcXB-xwFCu_vb8hoNjv7DTNwH5TWjpEuiVsyn9HPCEXqwF4120=@protonmail.com/ Cc: [email protected] Reported-by: Barnabás Pőcze <[email protected]> Signed-off-by: Jaroslav Kysela <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Fri Oct 4 10:25:58 2024 +0200 ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin [ Upstream commit b3ebb007060f89d5a45c9b99f06a55e36a1945b5 ] We received a regression report for System76 Pangolin (pang14) due to the recent fix for Tuxedo Sirius devices to support the top speaker. The reason was the conflicting PCI SSID, as often seen. As a workaround, now the codec SSID is checked and the quirk is applied conditionally only to Sirius devices. Fixes: 4178d78cd7a8 ("ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices") Reported-by: Christian Heusel <[email protected]> Reported-by: Jerry <[email protected]> Closes: https://lore.kernel.org/[email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue Oct 1 14:14:36 2024 +0200 ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs [ Upstream commit 1c801e7f77445bc56e5e1fec6191fd4503534787 ] Some time ago, we introduced the obey_preferred_dacs flag for choosing the DAC/pin pairs specified by the driver instead of parsing the paths. This works as expected, per se, but there have been a few cases where we forgot to set this flag while preferred_dacs table is already set up. It ended up with incorrect wiring and made us wondering why it doesn't work. Basically, when the preferred_dacs table is provided, it means that the driver really wants to wire up to follow that. That is, the presence of the preferred_dacs table itself is already a "do-it" flag. In this patch, we simply replace the evaluation of obey_preferred_dacs flag with the presence of preferred_dacs table for fixing the misbehavior. Another patch to drop of the obsoleted flag will follow. Fixes: 242d990c158d ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs") Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803 Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kailang Yang <[email protected]> Date: Thu Aug 22 10:54:19 2024 +0800 ALSA: hda/realtek - Fixed ALC256 headphone no sound [ Upstream commit 9b82ff1362f50914c8292902e07be98a9f59d33d ] Dell platform, plug headphone or headset, it had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kailang Yang <[email protected]> Date: Thu Aug 22 16:46:56 2024 +0800 ALSA: hda/realtek - FIxed ALC285 headphone no sound [ Upstream commit 1fa7b099d60ad64f559bd3b8e3f0d94b2e015514 ] Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug headphone or headset. It had a chance to get no sound from headphone. Replace depop procedure will solve this issue. Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ai Chao <[email protected]> Date: Thu Sep 26 14:02:52 2024 +0800 ALSA: hda/realtek: Add quirk for Huawei MateBook 13 KLV-WX9 commit dee476950cbd83125655a3f49e00d63b79f6114e upstream. The headset mic requires a fixup to be properly detected/used. Signed-off-by: Ai Chao <[email protected]> Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oder Chiou <[email protected]> Date: Mon Sep 30 18:50:39 2024 +0800 ALSA: hda/realtek: Fix the push button function for the ALC257 [ Upstream commit 05df9732a0894846c46d0062d4af535c5002799d ] The headset push button cannot work properly in case of the ALC257. This patch reverted the previous commit to correct the side effect. Fixes: ef9718b3d54e ("ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7") Signed-off-by: Oder Chiou <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Thu Aug 8 11:15:12 2024 +0200 ALSA: hdsp: Break infinite MIDI input flush loop [ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ] The current MIDI input flush on HDSP and HDSPM drivers relies on the hardware reporting the right value. If the hardware doesn't give the proper value but returns -1, it may be stuck at an infinite loop. Add a counter and break if the loop is unexpectedly too long. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans P. Moller <[email protected]> Date: Thu Oct 3 20:28:28 2024 -0300 ALSA: line6: add hw monitor volume control to POD HD500X commit 703235a244e533652346844cfa42623afb36eed1 upstream. Add hw monitor volume control for POD HD500X. This is done adding LINE6_CAP_HWMON_CTL to the capabilities Signed-off-by: Hans P. Moller <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Thu Sep 26 20:17:36 2024 +0200 ALSA: mixer_oss: Remove some incorrect kfree_const() usages [ Upstream commit 368e4663c557de4a33f321b44e7eeec0a21b2e4e ] "assigned" and "assigned->name" are allocated in snd_mixer_oss_proc_write() using kmalloc() and kstrdup(), so there is no point in using kfree_const() to free these resources. Switch to the more standard kfree() to free these resources. This could avoid a memory leak. Fixes: 454f5ec1d2b7 ("ALSA: mixer: oss: Constify snd_mixer_oss_assign_table definition") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://patch.msgid.link/63ac20f64234b7c9ea87a7fa9baf41e8255852f7.1727374631.git.christophe.jaillet@wanadoo.fr Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Joshua Pius <[email protected]> Date: Thu Sep 12 15:26:28 2024 +0000 ALSA: usb-audio: Add logitech Audio profile quirk [ Upstream commit a51c925c11d7b855167e64b63eb4378e5adfc11d ] Specify shortnames for the following Logitech Devices: Rally bar, Rally bar mini, Tap, MeetUp and Huddle. Signed-off-by: Joshua Pius <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Wed Aug 14 15:48:41 2024 +0200 ALSA: usb-audio: Define macros for quirk table entries [ Upstream commit 0c3ad39b791c2ecf718afcaca30e5ceafa939d5c ] Many entries in the USB-audio quirk tables have relatively complex expressions. For improving the readability, introduce a few macros. Those are applied in the following patch. Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chun-Yi Lee <[email protected]> Date: Wed Oct 2 11:54:58 2024 +0800 aoe: fix the potential use-after-free problem in more places commit 6d6e54fc71ad1ab0a87047fd9c211e75d86084a3 upstream. For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. Cc: [email protected] Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270 Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") Reported-by: Nicolai Stange <[email protected]> Signed-off-by: Chun-Yi Lee <[email protected]> Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Anshuman Khandual <[email protected]> Date: Mon Oct 7 13:17:07 2024 +0100 arm64: Add Cortex-715 CPU part definition [ Upstream commit 07e39e60bbf0ccd5f895568e1afca032193705c0 ] Add the CPU Partnumbers for the new Arm designs. Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Suzuki K Poulose <[email protected]> Cc: James Morse <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Anshuman Khandual <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> [ Mark: Trivial backport ] Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mark Rutland <[email protected]> Date: Mon Oct 7 13:17:08 2024 +0100 arm64: cputype: Add Neoverse-N3 definitions [ Upstream commit 924725707d80bc2588cefafef76ff3f164d299bc ] Add cputype definitions for Neoverse-N3. These will be used for errata detection in subsequent patches. These values can be found in Table A-261 ("MIDR_EL1 bit descriptions") in issue 02 of the Neoverse-N3 TRM, which can be found at: https://developer.arm.com/documentation/107997/0000/?lang=en Signed-off-by: Mark Rutland <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> [ Mark: trivial backport ] Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dragan Simic <[email protected]> Date: Mon Jul 15 19:44:20 2024 +0200 arm64: dts: rockchip: Correct the Pinebook Pro battery design capacity commit def33fb1191207f5afa6dcb681d71fef2a6c1293 upstream. All batches of the Pine64 Pinebook Pro, except the latest batch (as of 2024) whose hardware design was revised due to the component shortage, use a 1S lithium battery whose nominal/design capacity is 10,000 mAh, according to the battery datasheet. [1][2] Let's correct the design full-charge value in the Pinebook Pro board dts, to improve the accuracy of the hardware description, and to hopefully improve the accuracy of the fuel gauge a bit on all units that don't belong to the latest batch. The above-mentioned latest batch uses a different 1S lithium battery with a slightly lower capacity, more precisely 9,600 mAh. To make the fuel gauge work reliably on the latest batch, a sample battery would need to be sent to CellWise, to obtain its proprietary battery profile, whose data goes into "cellwise,battery-profile" in the Pinebook Pro board dts. Without that data, the fuel gauge reportedly works unreliably, so changing the design capacity won't have any negative effects on the already unreliable operation of the fuel gauge in the Pinebook Pros that belong to the latest batch. According to the battery datasheet, its voltage can go as low as 2.75 V while discharging, but it's better to leave the current 3.0 V value in the dts file, because of the associated Pinebook Pro's voltage regulation issues. [1] https://wiki.pine64.org/index.php/Pinebook_Pro#Battery [2] https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh%E8%A7%84%E6%A0%BC%E4%B9%A6-14.pdf Fixes: c7c4d698cd28 ("arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts") Cc: [email protected] Cc: Marek Kraus <[email protected]> Signed-off-by: Dragan Simic <[email protected]> Link: https://lore.kernel.org/r/731f8ef9b1a867bcc730d19ed277c8c0534c0842.1721065172.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Quentin Schulz <[email protected]> Date: Wed Jul 31 13:05:29 2024 +0200 arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma commit 741f5ba7ccba5d7ae796dd11c320e28045524771 upstream. The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC and SPI flash powered-down initially (in fact it keeps the reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so that eMMC and SPI can be used regardless of the state of the signal. Let's make this GPIO a hog so that it's reserved and locked in the proper state. At the same time, make sure the pin is reserved for the hog and cannot be requested by another node. Cc: [email protected] Signed-off-by: Quentin Schulz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dragan Simic <[email protected]> Date: Sun Aug 4 23:10:24 2024 +0200 arm64: dts: rockchip: Raise Pinebook Pro's panel backlight PWM frequency commit 8c51521de18755d4112a77a598a348b38d0af370 upstream. Increase the frequency of the PWM signal that drives the LED backlight of the Pinebook Pro's panel, from about 1.35 KHz (which equals to the PWM period of 740,740 ns), to exactly 8 kHz (which equals to the PWM period of 125,000 ns). Using a higher PWM frequency for the panel backlight, which reduces the flicker, can only be beneficial to the end users' eyes. On top of that, increasing the backlight PWM signal frequency reportedly eliminates the buzzing emitted from the Pinebook Pro's built-in speakers when certain backlight levels are set, which cause some weird interference with some of the components of the Pinebook Pro's audio chain. The old value for the backlight PWM period, i.e. 740,740 ns, is pretty much an arbitrary value that was selected during the very early bring-up of the Pinebook Pro, only because that value seemed to minimize horizontal line distortion on the display, which resulted from the old X.org drivers causing screen tearing when dragging windows around. That's no longer an issue, so there are no reasons to stick with the old PWM period value. The lower and the upper backlight PWM frequency limits for the Pinebook Pro's panel, according to its datasheet, are 200 Hz and 10 kHz, respectively. [1] These changes still leave some headroom, which may have some positive effects on the lifetime expectancy of the panel's backlight LEDs. [1] https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro") Cc: [email protected] Reported-by: Nikola Radojevic <[email protected]> Signed-off-by: Dragan Simic <[email protected]> Tested-by: Nikola Radojević <[email protected]> Link: https://lore.kernel.org/r/2a23b6cfd8c0513e5b233b4006ee3d3ed09b824f.1722805655.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mark Rutland <[email protected]> Date: Mon Oct 7 13:17:09 2024 +0100 arm64: errata: Expand speculative SSBS workaround once more [ Upstream commit 081eb7932c2b244f63317a982c5e3990e2c7fbdd ] A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS special-purpose register does not affect subsequent speculative instructions, permitting speculative store bypassing for a window of time. We worked around this for a number of CPUs in commits: * 7187bb7d0b5c7dfa ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417") * 75b3c43eab594bfb ("arm64: errata: Expand speculative SSBS workaround") * 145502cac7ea70b5 ("arm64: errata: Expand speculative SSBS workaround (again)") Since then, a (hopefully final) batch of updates have been published, with two more affected CPUs. For the affected CPUs the existing mitigation is sufficient, as described in their respective Software Developer Errata Notice (SDEN) documents: * Cortex-A715 (MP148) SDEN v15.0, erratum 3456084 https://developer.arm.com/documentation/SDEN-2148827/1500/ * Neoverse-N3 (MP195) SDEN v5.0, erratum 3456111 https://developer.arm.com/documentation/SDEN-3050973/0500/ Enable the existing mitigation by adding the relevant MIDRs to erratum_spec_ssbs_list, and update silicon-errata.rst and the Kconfig text accordingly. Signed-off-by: Mark Rutland <[email protected]> Cc: James Morse <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> [ Mark: fix conflict in silicon-errata.rst, handle move ] Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Wed Aug 28 11:56:36 2024 +0200 ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property [ Upstream commit 0e49cfe364dea4345551516eb2fe53135a10432b ] There is no "fsl,phy" property in pin controller pincfg nodes: imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Dahl <[email protected]> Date: Wed Aug 21 07:51:36 2024 +0200 ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks [ Upstream commit d355c895fa4ddd8bec15569eee540baeed7df8c5 ] The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK), sourced from the 32.768 kHz crystal oscillator or slow rc oscillator. The previously used Monitoring domain slow clock (MD_SLCK) is sourced from an internal RC oscillator which is most probably not precise enough for real time clock purposes. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt") Signed-off-by: Alexander Dahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] [claudiu.beznea: removed () around the last commit description paragraph, removed " in front of "timing domain slow clock", described that TD_SLCK can also be sourced from slow rc oscillator] Signed-off-by: Claudiu Beznea <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Mon Aug 26 07:49:33 2024 +0200 ARM: versatile: fix OF node leak in CPUs prepare [ Upstream commit f2642d97f2105ed17b2ece0c597450f2ff95d704 ] Machine code is leaking OF node reference from of_find_matching_node() in realview_smp_prepare_cpus(). Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method") Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Liviu Dudau <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hongbo Li <[email protected]> Date: Wed Aug 21 14:19:54 2024 +0800 ASoC: allow module autoloading for table db1200_pids [ Upstream commit 0e9fdab1e8df490354562187cdbb8dec643eae2c ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from platform_device_id table. Signed-off-by: Hongbo Li <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Liao Chen <[email protected]> Date: Mon Aug 26 08:49:21 2024 +0000 ASoC: intel: fix module autoloading [ Upstream commit ae61a3391088d29aa8605c9f2db84295ab993a49 ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Arseniy Krasnov <[email protected]> Date: Wed Sep 11 17:24:25 2024 +0300 ASoC: meson: axg-card: fix 'use-after-free' commit 4f9a71435953f941969a4f017e2357db62d85a86 upstream. Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: [email protected] Signed-off-by: Arseniy Krasnov <[email protected]> Reviewed-by: Jerome Brunet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ma Ke <[email protected]> Date: Fri Aug 30 22:31:54 2024 +0800 ASoC: rt5682: Return devm_of_clk_add_hw_provider to transfer the error commit fcca6d05ef49d5650514ea1dcfd12e4ae3ff2be6 upstream. Return devm_of_clk_add_hw_provider() in order to transfer the error, if it fails due to resource allocation failure or device tree clock provider registration failure. Cc: [email protected] Fixes: ebbfabc16d23 ("ASoC: rt5682: Add CCF usage for providing I2S clks") Signed-off-by: Ma Ke <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Liao Chen <[email protected]> Date: Mon Aug 26 08:49:23 2024 +0000 ASoC: tda7419: fix module autoloading [ Upstream commit 934b44589da9aa300201a00fe139c5c54f421563 ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Damien Le Moal <[email protected]> Date: Fri Jul 26 11:14:11 2024 +0900 ata: sata_sil: Rename sil_blacklist to sil_quirks [ Upstream commit 93b0f9e11ce511353c65b7f924cf5f95bd9c3aba ] Rename the array sil_blacklist to sil_quirks as this name is more neutral and is also consistent with how this driver define quirks with the SIL_QUIRK_XXX flags. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Niklas Cassel <[email protected]> Reviewed-by: Igor Pylypiv <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Nault <[email protected]> Date: Fri Jun 25 15:33:01 2021 +0200 bareudp: allow redirecting bareudp packets to eth devices [ Upstream commit 99c8719b79814cab3fd43519591dcc41c978a48c ] Even though bareudp transports L3 data (typically IP or MPLS), it needs to reset the mac_header pointer, so that other parts of the stack don't mistakenly access the outer header after the packet has been decapsulated. This allows to push an Ethernet header to bareudp packets and redirect them to an Ethernet device: $ tc filter add dev bareudp0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Without this patch, push_eth refuses to add an ethernet header because the skb appears to already have a MAC header. Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: 45fa29c85117 ("bareudp: Pull inner IP header in bareudp_udp_encap_recv().") Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Nault <[email protected]> Date: Wed Sep 11 11:20:58 2024 +0200 bareudp: Pull inner IP header in bareudp_udp_encap_recv(). [ Upstream commit 45fa29c85117170b0508790f878b13ec6593c888 ] Bareudp reads the inner IP header to get the ECN value. Therefore, it needs to ensure that it's part of the skb's linear data. This is similar to the vxlan and geneve fixes for that same problem: * commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().") * commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Nault <[email protected]> Date: Wed Sep 11 11:21:05 2024 +0200 bareudp: Pull inner IP header on xmit. [ Upstream commit c471236b2359e6b27388475dd04fff0a5e2bf922 ] Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore we need to ensure that the inner IP header is part of the skb's linear data. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konstantin Ovsepian <[email protected]> Date: Thu Aug 22 08:41:36 2024 -0700 blk_iocost: fix more out of bound shifts [ Upstream commit 9bce8005ec0dcb23a58300e8522fe4a31da606fa ] Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. Reported-by: Breno Leitao <[email protected]> Signed-off-by: Konstantin Ovsepian <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Mon Sep 2 21:03:27 2024 +0800 block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator() [ Upstream commit 0e456dba86c7f9a19792204a044835f1ca2c8dbb ] Consider the following merge chain: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \--------------\ \-------------\ \-------------\| V V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 IO from Process 1 will get bfqf2 from BIC1 first, then bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then handle this IO from bfqq3. However, the merge chain can be much deeper and bfqq3 can be merged to other bfqq as well. Fix this problem by iterating to the last bfqq in bfq_setup_cooperator(). Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Mon Sep 2 21:03:28 2024 +0800 block, bfq: don't break merge chain in bfq_split_bfqq() [ Upstream commit 42c306ed723321af4003b2a41bb73728cab54f85 ] Consider the following scenario: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \-------------\ \-------------\ \--------------\| V V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 1 2 4 If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq() decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will break the merge chain. Expected result: caller will allocate a new bfqq for BIC1 Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) | | | \-------------\ \--------------\| V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 0 1 3 Since the condition is only used for the last bfqq4 when the previous bfqq2 and bfqq3 are already splited. Fix the problem by checking if bfqq is the last one in the merge chain as well. Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Mon Sep 2 21:03:26 2024 +0800 block, bfq: fix possible UAF for bfqq->bic with merge chain [ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Riyan Dhiman <[email protected]> Date: Wed Sep 11 18:59:54 2024 +0530 block: fix potential invalid pointer dereference in blk_add_partition [ Upstream commit 26e197b7f9240a4ac301dd0ad520c0c697c2ea7d ] The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving code readability and handling specific error scenarios explicitly. The function now distinguishes the general error case from -ENXIO without altering the existing behavior of md_autodetect_dev() calls. Fixes: b72053072c0b (block: allow partitions on host aware zone devices) Signed-off-by: Riyan Dhiman <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christian Heusel <[email protected]> Date: Fri Jan 12 00:15:18 2024 +0100 block: print symbolic error name instead of error code [ Upstream commit 25c1772a0493463408489b1fae65cf77fe46cac1 ] Utilize the %pe print specifier to get the symbolic error name as a string (i.e "-ENOMEM") in the log message instead of the error code to increase its readablility. This change was suggested in https://lore.kernel.org/all/[email protected]/ Signed-off-by: Christian Heusel <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Stable-dep-of: 26e197b7f924 ("block: fix potential invalid pointer dereference in blk_add_partition") Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Thu Sep 12 11:12:04 2024 +0800 Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bb7f4f0bcee6 ("btmrvl: add platform specific wakeup interrupt support") Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luiz Augusto von Dentz <[email protected]> Date: Mon Sep 9 16:51:52 2024 -0400 Bluetooth: btusb: Fix not handling ZPL/short-transfer [ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ] Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change. Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Kiran K <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luiz Augusto von Dentz <[email protected]> Date: Fri Apr 5 15:50:47 2024 -0400 Bluetooth: L2CAP: Fix not validating setsockopt user input [ Upstream commit 4f3951242ace5efc7131932e2e01e6ac6baed846 ] Check user input length before copying data. Fixes: 33575df7be67 ("Bluetooth: move l2cap_sock_setsockopt() to l2cap_sock.c") Fixes: 3ee7b7cd8390 ("Bluetooth: Add BT_MODE socket option") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luiz Augusto von Dentz <[email protected]> Date: Mon Sep 30 13:26:21 2024 -0400 Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change [ Upstream commit 08d1914293dae38350b8088980e59fbc699a72fe ] rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 Fixes: 3241ad820dbb ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tao Chen <[email protected]> Date: Tue Sep 10 22:41:10 2024 +0800 bpf: Check percpu map value size first [ Upstream commit 1d244784be6b01162b732a5a7d637dfc024c3203 ] Percpu map is often used, but the map value size limit often ignored, like issue: https://github.com/iovisor/bcc/issues/2519. Actually, percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first, like percpu map of local_storage. Maybe the error message seems clearer compared with "cannot allocate memory". Signed-off-by: Jinke Han <[email protected]> Signed-off-by: Tao Chen <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel Borkmann <[email protected]> Date: Fri Sep 13 21:17:46 2024 +0200 bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit [ Upstream commit cfe69c50b05510b24e26ccb427c7cc70beafd6c1 ] The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit: The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long" and therefore always considered fixed 64bit no matter if 64 or 32bit underlying architecture. This contract breaks in case of the two mentioned helpers since their BPF_CALL definition for the helpers was added with {unsigned,}long *res. Meaning, the transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper) breaks here. Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program point of view, this means upper bits will be seen as uninitialised. Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation. Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger compiler warnings (incompatible pointer types passing 'long *' to parameter of type '__s64 *' (aka 'long long *')) for existing BPF programs. Leaving the signatures as-is would be fine as from BPF program point of view it is still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying architectures. Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue. Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers") Reported-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Toke Høiland-Jørgensen <[email protected]> Date: Fri Sep 27 13:51:18 2024 +0000 bpf: Fix DEVMAP_HASH overflow check on 32-bit arches [ Upstream commit 281d464a34f540de166cee74b723e97ac2515ec3 ] The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Link: https://lore.kernel.org/r/[email protected] Reported-and-tested-by: [email protected] Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qu Wenruo <[email protected]> Date: Sat Sep 28 08:05:58 2024 +0930 btrfs: fix a NULL pointer dereference when failed to start a new trasacntion commit c3b47f49e83197e8dffd023ec568403bcdbb774b upstream. [BUG] Syzbot reported a NULL pointer dereference with the following crash: FAULT_INJECTION: forcing a failure. start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676 prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642 relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678 ... BTRFS info (device loop0): balance: ended with status: -12 Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667] RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926 Call Trace: <TASK> commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496 btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430 del_balance_item fs/btrfs/volumes.c:3678 [inline] reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742 btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [CAUSE] The allocation failure happens at the start_transaction() inside prepare_to_relocate(), and during the error handling we call unset_reloc_control(), which makes fs_info->balance_ctl to be NULL. Then we continue the error path cleanup in btrfs_balance() by calling reset_balance_state() which will call del_balance_item() to fully delete the balance item in the root tree. However during the small window between set_reloc_contrl() and unset_reloc_control(), we can have a subvolume tree update and created a reloc_root for that subvolume. Then we go into the final btrfs_commit_transaction() of del_balance_item(), and into btrfs_update_reloc_root() inside commit_fs_roots(). That function checks if fs_info->reloc_ctl is in the merge_reloc_tree stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer dereference. [FIX] Just add extra check on fs_info->reloc_ctl inside btrfs_update_reloc_root(), before checking fs_info->reloc_ctl->merge_reloc_tree. That DEAD_RELOC_TREE handling is to prevent further modification to the reloc tree during merge stage, but since there is no reloc_ctl at all, we do not need to bother that. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ CC: [email protected] # 4.19+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jeff Layton <[email protected]> Date: Mon Aug 12 12:30:52 2024 -0400 btrfs: update target inode's ctime on unlink [ Upstream commit 3bc2ac2f8f0b78a13140fc72022771efe0c9b778 ] Unlink changes the link count on the target inode. POSIX mandates that the ctime must also change when this occurs. According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html: "Upon successful completion, unlink() shall mark for update the last data modification and last file status change timestamps of the parent directory. Also, if the file's link count is not 0, the last file status change timestamp of the file shall be marked for update." Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: David Sterba <[email protected]> [ add link to the opengroup docs ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Filipe Manana <[email protected]> Date: Tue Oct 1 11:06:52 2024 +0100 btrfs: wait for fixup workers before stopping cleaner kthread during umount commit 41fd1e94066a815a7ab0a7025359e9b40e4b3576 upstream. During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:2343 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x1a2/0x420 mm/slub.c:4682 put_task_struct include/linux/sched/task.h:144 [inline] delayed_put_task_struct+0x125/0x300 kernel/exit.c:228 rcu_do_batch kernel/rcu/tree.c:2567 [inline] rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1037 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1037 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3086 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3190 context_switch kernel/sched/core.c:5318 [inline] __schedule+0x184b/0x4ae0 kernel/sched/core.c:6675 schedule_idle+0x56/0x90 kernel/sched/core.c:6793 do_idle+0x56a/0x5d0 kernel/sched/idle.c:354 cpu_startup_entry+0x42/0x60 kernel/sched/idle.c:424 start_secondary+0x102/0x110 arch/x86/kernel/smpboot.c:314 common_startup_64+0x13e/0x147 The buggy address belongs to the object at ffff8880272a8000 which belongs to the cache task_struct of size 7424 The buggy address is located 2584 bytes inside of freed 7424-byte region [ffff8880272a8000, ffff8880272a9d00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x272a8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000 head: 00fff00000000040 ffff88801bafa500 dead000000000122 0000000000000000 head: 0000000000000000 0000000080040004 00000001f5000000 0000000000000000 head: 00fff00000000003 ffffea00009caa01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 2, tgid 2 (kthreadd), ts 71247381401, free_ts 71214998153 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1545 [inline] get_page_from_freelist+0x3039/0x3180 mm/page_alloc.c:3457 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4733 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_slab_page+0x6a/0x120 mm/slub.c:2413 allocate_slab+0x5a/0x2f0 mm/slub.c:2579 new_slab mm/slub.c:2632 [inline] ___slab_alloc+0xcd1/0x14b0 mm/slub.c:3819 __slab_alloc+0x58/0xa0 mm/slub.c:3909 __slab_alloc_node mm/slub.c:3962 [inline] slab_alloc_node mm/slub.c:4123 [inline] kmem_cache_alloc_node_noprof+0x1fe/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 page last free pid 5230 tgid 5230 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1108 [inline] free_unref_page+0xcd0/0xf00 mm/page_alloc.c:2638 discard_slab mm/slub.c:2678 [inline] __put_partials+0xeb/0x130 mm/slub.c:3146 put_cpu_partial+0x17c/0x250 mm/slub.c:3221 __slab_free+0x2ea/0x3d0 mm/slub.c:4450 qlink_free mm/kasan/quarantine.c:163 [inline] qlist_free_all+0x9a/0x140 mm/kasan/quarantine.c:179 kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286 __kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:329 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4142 getname_flags+0xb7/0x540 fs/namei.c:139 do_sys_openat2+0xd2/0x1d0 fs/open.c:1409 do_sys_open fs/open.c:1430 [inline] __do_sys_openat fs/open.c:1446 [inline] __se_sys_openat fs/open.c:1441 [inline] __x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Memory state around the buggy address: ffff8880272a8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880272a8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880272a8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880272a8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880272a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ CC: [email protected] # 4.19+ Reviewed-by: Qu Wenruo <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Mon Aug 26 07:49:34 2024 +0200 bus: integrator-lm: fix OF node leak in probe() commit 15a62b81175885b5adfcaf49870466e3603f06c7 upstream. Driver code is leaking OF node reference from of_find_matching_node() in probe(). Fixes: ccea5e8a5918 ("bus: Add driver for Integrator/AP logic modules") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Liviu Dudau <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Wed Sep 4 18:22:37 2024 -0700 can: bcm: Clear bo->bcm_proc_read after remove_proc_entry(). [ Upstream commit 94b0818fa63555a65f6ba107080659ea6bcca63e ] syzbot reported a warning in bcm_release(). [0] The blamed change fixed another warning that is triggered when connect() is issued again for a socket whose connect()ed device has been unregistered. However, if the socket is just close()d without the 2nd connect(), the remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry() in bcm_release(). Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify(). [0] name '4986' WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Modules linked in: CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711 Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07 RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246 RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640 R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bcm_release+0x250/0x880 net/can/bcm.c:1578 __sock_release net/socket.c:659 [inline] sock_close+0xbc/0x240 net/socket.c:1421 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:228 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:882 do_group_exit+0x207/0x2c0 kernel/exit.c:1031 __do_sys_exit_group kernel/exit.c:1042 [inline] __se_sys_exit_group kernel/exit.c:1040 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcfb51ee969 Code: Unable to access opcode bytes at 0x7fcfb51ee93f. RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0 R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160 </TASK> Fixes: 76fe372ccb81 ("can: bcm: Remove proc entry when dev is unregistered.") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=0532ac7a06fb1a03187e Tested-by: [email protected] Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Vincent Mailhol <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Changzhong <[email protected]> Date: Thu Aug 29 20:48:23 2024 +0800 can: j1939: use correct function name in comment [ Upstream commit dc2ddcd136fe9b6196a7dd01f75f824beb02d43f ] The function j1939_cancel_all_active_sessions() was renamed to j1939_cancel_active_session() but name in comment wasn't updated. Signed-off-by: Zhang Changzhong <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://patch.msgid.link/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Faiz Abbas <[email protected]> Date: Mon May 10 10:55:41 2021 +0530 can: m_can: Add support for transceiver as phy [ Upstream commit d836cb5fe045463cdab15ad6f278f7c7c194228f ] Add support for implementing transceiver node as phy. The max_bitrate is obtained by getting a phy attribute. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Faiz Abbas <[email protected]> Signed-off-by: Aswath Govindraju <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Stable-dep-of: 2c09b50efcad ("can: m_can: m_can_close(): stop clocks after device has been shut down") Signed-off-by: Sasha Levin <[email protected]>
Author: Marc Kleine-Budde <[email protected]> Date: Mon Sep 9 15:07:41 2024 +0200 can: m_can: m_can_close(): stop clocks after device has been shut down [ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ] After calling m_can_stop() an interrupt may be pending or NAPI might still be executed. This means the driver might still touch registers of the IP core after the clocks have been disabled. This is not good practice and might lead to aborts depending on the SoC integration. To avoid these potential problems, make m_can_close() symmetric to m_can_open(), i.e. stop the clocks at the end, right before shutting down the transceiver. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://patch.msgid.link/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xiubo Li <[email protected]> Date: Thu Sep 5 06:22:18 2024 +0800 ceph: remove the incorrect Fw reference check when dirtying pages [ Upstream commit c08dfb1b49492c09cf13838c71897493ea3b424e ] When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference. Fixes: 5dda377cf0a6 ("ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference") Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Patrick Donnelly <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yafang Shao <[email protected]> Date: Sun Oct 29 06:14:29 2023 +0000 cgroup: Make operations on the cgroup root_list RCU safe [ Upstream commit d23b5c577715892c87533b13923306acc6243f93 ] At present, when we perform operations on the cgroup root_list, we must hold the cgroup_mutex, which is a relatively heavyweight lock. In reality, we can make operations on this list RCU-safe, eliminating the need to hold the cgroup_mutex during traversal. Modifications to the list only occur in the cgroup root setup and destroy paths, which should be infrequent in a production environment. In contrast, traversal may occur frequently. Therefore, making it RCU-safe would be beneficial. Signed-off-by: Yafang Shao <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Waiman Long <[email protected]> Date: Thu Dec 7 08:46:14 2023 -0500 cgroup: Move rcu_head up near the top of cgroup_root commit a7fb0423c201ba12815877a0b5a68a6a1710b23a upstream. Commit d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe") adds a new rcu_head to the cgroup_root structure and kvfree_rcu() for freeing the cgroup_root. The current implementation of kvfree_rcu(), however, has the limitation that the offset of the rcu_head structure within the larger data structure must be less than 4096 or the compilation will fail. See the macro definition of __is_kvfree_rcu_offset() in include/linux/rcupdate.h for more information. By putting rcu_head below the large cgroup structure, any change to the cgroup structure that makes it larger run the risk of causing build failure under certain configurations. Commit 77070eeb8821 ("cgroup: Avoid false cacheline sharing of read mostly rstat_cpu") happens to be the last straw that breaks it. Fix this problem by moving the rcu_head structure up before the cgroup structure. Fixes: d23b5c577715 ("cgroup: Make operations on the cgroup root_list RCU safe") Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Waiman Long <[email protected]> Acked-by: Yafang Shao <[email protected]> Reviewed-by: Yosry Ahmed <[email protected]> Reviewed-by: Michal Koutný <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Mon Aug 26 08:58:01 2024 +0200 clk: bcm: bcm53573: fix OF node leak in init [ Upstream commit f92d67e23b8caa81f6322a2bad1d633b00ca000e ] Driver code is leaking OF node reference from of_get_parent() in bcm53573_ilp_init(). Usage of of_get_parent() is not needed in the first place, because the parent node will not be freed while we are processing given node (triggered by CLK_OF_DECLARE()). Thus fix the leak by accessing parent directly, instead of of_get_parent(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhipeng Wang <[email protected]> Date: Fri Jun 7 21:33:38 2024 +0800 clk: imx: imx8mp: fix clock tree update of TF-A managed clocks [ Upstream commit 3d29036853b9cb07ac49e8261fca82a940be5c41 ] On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the SiP and then does clk_set_parent on the DDR muxes to synchronize the clock tree. since commit 936c383673b9 ("clk: imx: fix composite peripheral flags"), these TF-A managed muxes have SET_PARENT_GATE set, which results in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY: clk_set_parent(dram_apb_src, sys1_pll_40m);(busfreq-imx8mq.c) commit 926bf91248dd ("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it. This is safe to do, because updating the Linux clock tree to reflect reality will always be glitch-free. Another reason to this patch is that powersave image BT music requires dram to be 400MTS, so clk_set_parent(dram_alt_src, sys1_pll_800m); is required. Without this patch, it will not succeed. Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags") Signed-off-by: Zhipeng Wang <[email protected]> Reviewed-by: Ahmad Fatoum <[email protected]> Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Fan <[email protected]> Date: Fri Jun 7 21:33:39 2024 +0800 clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D [ Upstream commit a54c441b46a0745683c2eef5a359d22856d27323 ] For i.MX7D DRAM related mux clock, the clock source change should ONLY be done done in low level asm code without accessing DRAM, and then calling clk API to sync the HW clock status with clk tree, it should never touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag should NOT be added, otherwise, DRAM's clock parent will be disabled when DRAM is active, and system will hang. Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mike Tipton <[email protected]> Date: Fri Aug 9 10:51:29 2024 +0530 clk: qcom: clk-rpmh: Fix overflow in BCM vote commit a4e5af27e6f6a8b0d14bc0d7eb04f4a6c7291586 upstream. Valid frequencies may result in BCM votes that exceed the max HW value. Set vote ceiling to BCM_TCS_CMD_VOTE_MASK to ensure the votes aren't truncated, which can result in lower frequencies than desired. Fixes: 04053f4d23a4 ("clk: qcom: clk-rpmh: Add IPA clock support") Cc: [email protected] Signed-off-by: Mike Tipton <[email protected]> Reviewed-by: Taniya Das <[email protected]> Signed-off-by: Imran Shaik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Sun Aug 4 08:40:05 2024 +0300 clk: qcom: dispcc-sm8250: use CLK_SET_RATE_PARENT for branch clocks [ Upstream commit 0e93c6320ecde0583de09f3fe801ce8822886fec ] Add CLK_SET_RATE_PARENT for several branch clocks. Such clocks don't have a way to change the rate, so set the parent rate instead. Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Cc: [email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Fri Jul 19 19:12:38 2024 +0530 clk: qcom: gcc-sm8250: Do not turn off PCIe GDSCs during gdsc_disable() commit ade508b545c969c72cd68479f275a5dd640fd8b9 upstream. With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This can happen during scenarios such as system suspend and breaks the resume of PCIe controllers from suspend. So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs during gdsc_disable() and allow the hardware to transition the GDSCs to retention when the parent domain enters low power state during system suspend. Cc: [email protected] # 5.7 Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sebastian Reichel <[email protected]> Date: Mon Mar 25 20:33:36 2024 +0100 clk: rockchip: fix error for unknown clocks commit 12fd64babaca4dc09d072f63eda76ba44119816a upstream. There is a clk == NULL check after the switch to check for unsupported clk types. Since clk is re-assigned in a loop, this check is useless right now for anything but the first round. Let's fix this up by assigning clk = NULL in the loop before the switch statement. Fixes: a245fecbb806 ("clk: rockchip: add basic infrastructure for clock branches") Cc: [email protected] Signed-off-by: Sebastian Reichel <[email protected]> [added fixes + stable-cc] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jonas Karlman <[email protected]> Date: Sat Jun 15 17:03:53 2024 +0000 clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228 [ Upstream commit 1d34b9757523c1ad547bd6d040381f62d74a3189 ] Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically parented by the hdmiphy clk and it is expected that the DCLK_VOP and hdmiphy clk rate are kept in sync. Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used on RK3328, to make full use of all possible supported display modes. Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP") Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228") Signed-off-by: Jonas Karlman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Lechner <[email protected]> Date: Mon Aug 26 10:35:29 2024 -0500 clk: ti: dra7-atl: Fix leak of of_nodes [ Upstream commit 9d6e9f10e2e031fb7bfb3030a7d1afc561a28fea ] This fix leaking the of_node references in of_dra7_atl_clk_probe(). The docs for of_parse_phandle_with_args() say that the caller must call of_node_put() on the returned node. This adds the missing of_node_put() to fix the leak. Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Signed-off-by: David Lechner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ankit Agrawal <[email protected]> Date: Sat Jul 13 15:27:13 2024 +0530 clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init() [ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ] Add the missing iounmap() when clock frequency fails to get read by the of_property_read_u32() call, or if the call to msm_timer_init() fails. Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer") Signed-off-by: Ankit Agrawal <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox Signed-off-by: Daniel Lezcano <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Suzuki K Poulose <[email protected]> Date: Tue Jul 2 14:28:46 2024 +0100 coresight: tmc: sg: Do not leak sg_table [ Upstream commit c58dc5a1f886f2fcc1133746d0cbaa1fe7fd44ff ] Running perf with cs_etm on Juno triggers the following kmemleak warning ! :~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff8806b6d720 (size 96): comm "perf", pid 562, jiffies 4297810960 hex dump (first 32 bytes): 38 d8 13 07 88 ff ff ff 00 d0 9e 85 c0 ff ff ff 8............... 00 10 00 88 c0 ff ff ff 00 f0 ff f7 ff 00 00 00 ................ backtrace (crc 1dbf6e00): [<ffffffc08107381c>] kmemleak_alloc+0xbc/0xd8 [<ffffffc0802f9798>] kmalloc_trace_noprof+0x220/0x2e8 [<ffffffc07bb71948>] tmc_alloc_sg_table+0x48/0x208 [coresight_tmc] [<ffffffc07bb71cbc>] tmc_etr_alloc_sg_buf+0xac/0x240 [coresight_tmc] [<ffffffc07bb72538>] tmc_alloc_etr_buf.constprop.0+0x1f0/0x260 [coresight_tmc] [<ffffffc07bb7280c>] alloc_etr_buf.constprop.0.isra.0+0x74/0xa8 [coresight_tmc] [<ffffffc07bb72950>] tmc_alloc_etr_buffer+0x110/0x260 [coresight_tmc] [<ffffffc07bb38afc>] etm_setup_aux+0x204/0x3b0 [coresight] [<ffffffc08025837c>] rb_alloc_aux+0x20c/0x318 [<ffffffc08024dd84>] perf_mmap+0x2e4/0x7a0 [<ffffffc0802cceb0>] mmap_region+0x3b0/0xa08 [<ffffffc0802cd8a8>] do_mmap+0x3a0/0x500 [<ffffffc080295328>] vm_mmap_pgoff+0x100/0x1d0 [<ffffffc0802cadf8>] ksys_mmap_pgoff+0xb8/0x110 [<ffffffc080020688>] __arm64_sys_mmap+0x38/0x58 [<ffffffc080028fc0>] invoke_syscall.constprop.0+0x58/0x100 This due to the fact that we do not free the "sg_table" itself while freeing up the SG table and data pages. Fix this by freeing the sg_table in tmc_free_sg_table(). Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework") Cc: Mike Leach <[email protected]> Cc: James Clark <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Reviewed-by: Anshuman Khandual <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Nishanth Menon <[email protected]> Date: Wed Aug 28 08:19:15 2024 -0500 cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately [ Upstream commit abc00ffda43bd4ba85896713464c7510c39f8165 ] Commit b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx") introduced special handling for OMAP3 class devices where syscon node may not be present. However, this also creates a bug where the syscon node is present, however the offset used to read is beyond the syscon defined range. Fix this by providing a quirk option that is populated when such special handling is required. This allows proper failure for all other platforms when the syscon node and efuse offsets are mismatched. Fixes: b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx") Signed-off-by: Nishanth Menon <[email protected]> Tested-by: Dhruva Gole <[email protected]> Reviewed-by: Kevin Hilman <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pavan Kumar Paluri <[email protected]> Date: Thu Aug 15 07:25:00 2024 -0500 crypto: ccp - Properly unregister /dev/sev on sev PLATFORM_STATUS failure commit ce3d2d6b150ba8528f3218ebf0cee2c2c572662d upstream. In case of sev PLATFORM_STATUS failure, sev_get_api_version() fails resulting in sev_data field of psp_master nulled out. This later becomes a problem when unloading the ccp module because the device has not been unregistered (via misc_deregister()) before clearing the sev_data field of psp_master. As a result, on reloading the ccp module, a duplicate device issue is encountered as can be seen from the dmesg log below. on reloading ccp module via modprobe ccp Call Trace: <TASK> dump_stack_lvl+0xd7/0xf0 dump_stack+0x10/0x20 sysfs_warn_dup+0x5c/0x70 sysfs_create_dir_ns+0xbc/0xd kobject_add_internal+0xb1/0x2f0 kobject_add+0x7a/0xe0 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_device_parent+0xd4/0x1e0 ? __pfx_klist_children_get+0x10/0x10 device_add+0x121/0x870 ? srso_alias_return_thunk+0x5/0xfbef5 device_create_groups_vargs+0xdc/0x100 device_create_with_groups+0x3f/0x60 misc_register+0x13b/0x1c0 sev_dev_init+0x1d4/0x290 [ccp] psp_dev_init+0x136/0x300 [ccp] sp_init+0x6f/0x80 [ccp] sp_pci_probe+0x2a6/0x310 [ccp] ? srso_alias_return_thunk+0x5/0xfbef5 local_pci_probe+0x4b/0xb0 work_for_cpu_fn+0x1a/0x30 process_one_work+0x203/0x600 worker_thread+0x19e/0x350 ? __pfx_worker_thread+0x10/0x10 kthread+0xeb/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> kobject: kobject_add_internal failed for sev with -EEXIST, don't try to register things with the same name in the same directory. ccp 0000:22:00.1: sev initialization failed ccp 0000:22:00.1: psp initialization failed ccp 0000:a2:00.1: no command queues available ccp 0000:a2:00.1: psp enabled Address this issue by unregistering the /dev/sev before clearing out sev_data in case of PLATFORM_STATUS failure. Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support") Cc: [email protected] Signed-off-by: Pavan Kumar Paluri <[email protected]> Acked-by: Tom Lendacky <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhen Lei <[email protected]> Date: Wed Sep 4 21:39:40 2024 +0800 debugobjects: Fix conditions in fill_pool() commit 684d28feb8546d1e9597aa363c3bfcf52fe250b7 upstream. fill_pool() uses 'obj_pool_min_free' to decide whether objects should be handed back to the kmem cache. But 'obj_pool_min_free' records the lowest historical value of the number of objects in the object pool and not the minimum number of objects which should be kept in the pool. Use 'debug_objects_pool_min_level' instead, which holds the minimum number which was scaled to the number of CPUs at boot time. [ tglx: Massage change log ] Fixes: d26bf5056fc0 ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()") Fixes: 36c4ead6f6df ("debugobjects: Add global free list and the counter") Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Andy Shevchenko <[email protected]> Date: Thu Sep 22 16:54:10 2022 +0300 device property: Add const qualifier to device_get_match_data() parameter commit aade55c86033bee868a93e4bf3843c9c99e84526 upstream. Add const qualifier to the device_get_match_data() parameter. Some of the future users may utilize this function without forcing the type. All the same, dev_fwnode() may be used with a const qualifier. Reported-by: kernel test robot <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: T.J. Mercier <[email protected]> Date: Fri Aug 30 19:26:26 2024 +0000 dma-buf: heaps: Fix off-by-one in CMA heap fault handler commit ea5ff5d351b520524019f7ff7f9ce418de2dad87 upstream. Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps: Don't track CMA dma-buf pages under RssFile") it was possible to obtain a mapping larger than the buffer size via mremap and bypass the overflow check in dma_buf_mmap_internal. When using such a mapping to attempt to fault past the end of the buffer, the CMA heap fault handler also checks the fault offset against the buffer size, but gets the boundary wrong by 1. Fix the boundary check so that we don't read off the end of the pages array and insert an arbitrary page in the mapping. Reported-by: Xingyu Jin <[email protected]> Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation") Cc: [email protected] # Applicable >= 5.10. Needs adjustments only for 5.10. Signed-off-by: T.J. Mercier <[email protected]> Acked-by: John Stultz <[email protected]> Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] [ TJ: Backport to 5.10. On this kernel the bug is located in dma_heap_vm_fault which is used by both the CMA and system heaps. ] Signed-off-by: T.J. Mercier <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mikhail Lobanov <[email protected]> Date: Mon Sep 9 09:37:36 2024 -0400 drbd: Add NULL check for net_conf to prevent dereference in state validation commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream. If the net_conf pointer is NULL and the code attempts to access its fields without a check, it will lead to a null pointer dereference. Add a NULL check before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Cc: [email protected] Signed-off-by: Mikhail Lobanov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qiu-ji Chen <[email protected]> Date: Fri Sep 13 16:35:04 2024 +0800 drbd: Fix atomicity violation in drbd_uuid_set_bm() commit 2f02b5af3a4482b216e6a466edecf6ba8450fa45 upstream. The violation of atomicity occurs when the drbd_uuid_set_bm function is executed simultaneously with modifying the value of device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while device->ldev->md.uuid[UI_BITMAP] passes the validity check when its value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is written to zero. In this case, the check in drbd_uuid_set_bm might refer to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking), which allows an invalid value to pass the validity check, resulting in inconsistency. To address this issue, it is recommended to include the data validity check within the locked section of the function. This modification ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not change during the validation process, thereby maintaining its integrity. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. Fixes: 9f2247bb9b75 ("drbd: Protect accesses to the uuid set with a spinlock") Cc: [email protected] Signed-off-by: Qiu-ji Chen <[email protected]> Reviewed-by: Philipp Reisner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zijun Hu <[email protected]> Date: Wed Jul 24 21:54:48 2024 +0800 driver core: bus: Return -EIO instead of 0 when show/store invalid bus attribute [ Upstream commit c0fd973c108cdc22a384854bc4b3e288a9717bb2 ] Return -EIO instead of 0 for below erroneous bus attribute operations: - read a bus attribute without show(). - write a bus attribute without store(). Signed-off-by: Zijun Hu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Junlin Li <[email protected]> Date: Wed Jul 3 01:50:23 2024 +0800 drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error [ Upstream commit 46d7ebfe6a75a454a5fa28604f0ef1491f9d8d14 ] Ensure index in rtl2830_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter") Signed-off-by: Junlin Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Junlin Li <[email protected]> Date: Tue Jul 2 21:24:13 2024 +0800 drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error [ Upstream commit 8ae06f360cfaca2b88b98ca89144548b3186aab1 ] Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. Signed-off-by: Junlin Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter") [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] Signed-off-by: Sasha Levin <[email protected]>
Author: Yuesong Li <[email protected]> Date: Thu Aug 22 17:09:27 2024 +0800 drivers:drm:exynos_drm_gsc:Fix wrong assignment in gsc_bind() [ Upstream commit 94ebc3d3235c5c516f67315059ce657e5090e94b ] cocci reported a double assignment problem. Upon reviewing previous commits, it appears this may actually be an incorrect assignment. Fixes: 8b9550344d39 ("drm/ipp: clean up debug messages") Signed-off-by: Yuesong Li <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Srinivasan Shanmugam <[email protected]> Date: Thu Jul 25 07:23:48 2024 +0530 drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream [ Upstream commit 66d71a72539e173a9b00ca0b1852cbaa5f5bf1ad ] This commit addresses a null pointer dereference issue in the `commit_planes_for_stream` function at line 4140. The issue could occur when `top_pipe_to_program` is null. The fix adds a check to ensure `top_pipe_to_program` is not null before accessing its stream_res. This prevents a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906) Cc: Tom Chung <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Alex Hung <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Hung <[email protected]> Date: Thu Aug 29 17:30:26 2024 -0600 drm/amd/display: Check null pointer before dereferencing se [ Upstream commit ff599ef6970ee000fa5bc38d02fa5ff5f3fc7575 ] [WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. Acked-by: Alex Hung <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Hung <[email protected]> Date: Mon Jul 29 15:29:09 2024 -0600 drm/amd/display: Check null pointers before using dc->clk_mgr [ Upstream commit 95d9e0803e51d5a24276b7643b244c7477daf463 ] [WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Hung <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Hung <[email protected]> Date: Thu Jun 27 20:05:14 2024 -0600 drm/amd/display: Check stream before comparing them [ Upstream commit 35ff747c86767937ee1e0ca987545b7eed7a0810 ] [WHAT & HOW] amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is necessary to check for null before dereferencing them. This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Jerry Zuo <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Srinivasan Shanmugam <[email protected]> Date: Sat Jul 20 18:05:20 2024 +0530 drm/amd/display: Fix index out of bounds in DCN30 color transformation [ Upstream commit d81873f9e715b72d4f8d391c8eb243946f784dfc ] This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Alex Hung <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Srinivasan Shanmugam <[email protected]> Date: Sat Jul 20 18:44:02 2024 +0530 drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation [ Upstream commit bc50b614d59990747dd5aeced9ec22f9258991ff ] This commit addresses a potential index out of bounds issue in the `cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30 color management module. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Alex Hung <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Srinivasan Shanmugam <[email protected]> Date: Sat Jul 20 17:48:27 2024 +0530 drm/amd/display: Fix index out of bounds in degamma hardware format translation [ Upstream commit b7e99058eb2e86aabd7a10761e76cae33d22b49f ] Fixes index out of bounds issue in `cm_helper_translate_curve_to_degamma_hw_format` function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max Cc: Tom Chung <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Alex Hung <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Hamza Mahfooz <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Fangzhi Zuo <[email protected]> Date: Mon Aug 12 12:13:44 2024 -0400 drm/amd/display: Fix Synaptics Cascaded Panamera DSC Determination commit 4437936c6b696b98f3fe1d8679a2788c41b4df77 upstream. Synaptics Cascaded Panamera topology needs to unconditionally acquire root aux for dsc decoding. Reviewed-by: Roman Li <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Signed-off-by: Zaeem Mohamed <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: Mario Limonciello <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alex Hung <[email protected]> Date: Mon Jul 15 09:57:01 2024 -0600 drm/amd/display: Initialize get_bytes_per_element's default to 1 [ Upstream commit 4067f4fa0423a89fb19a30b57231b384d77d2610 ] Variables, used as denominators and maybe not assigned to other values, should not be 0. bytes_per_element_y & bytes_per_element_c are initialized by get_bytes_per_element() which should never return 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. Signed-off-by: Alex Hung <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Robin Chen <[email protected]> Date: Fri Aug 23 15:00:28 2024 +0800 drm/amd/display: Round calculated vtotal commit c03fca619fc687338a3b6511fdbed94096abdf79 upstream. [WHY] The calculated vtotal may has 1 line deviation. To get precisely vtotal number, round the vtotal result. Cc: Mario Limonciello <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Reviewed-by: Anthony Koo <[email protected]> Signed-off-by: Robin Chen <[email protected]> Signed-off-by: Alex Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tim Huang <[email protected]> Date: Wed Aug 7 17:15:12 2024 +0800 drm/amd/pm: ensure the fw_info is not null before using it [ Upstream commit 186fb12e7a7b038c2710ceb2fb74068f1b5d55a4 ] This resolves the dereference null return value warning reported by Coverity. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Jesse Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Liu <[email protected]> Date: Fri Aug 30 15:25:54 2024 +0800 drm/amdgpu: add raven1 gfxoff quirk [ Upstream commit 0126c0ae11e8b52ecfde9d1b174ee2f32d6c3a5d ] Fix screen corruption with openkylin. Link: https://bbs.openkylin.top/t/topic/171497 Signed-off-by: Peng Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Liu <[email protected]> Date: Fri Aug 30 15:27:08 2024 +0800 drm/amdgpu: enable gfxoff quirk on HP 705G4 [ Upstream commit 2c7795e245d993bcba2f716a8c93a5891ef910c9 ] Enabling gfxoff quirk results in perfectly usable graphical user interface on HP 705G4 DM with R5 2400G. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Peng Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Deucher <[email protected]> Date: Tue Jul 23 13:23:56 2024 -0400 drm/amdgpu: properly handle vbios fake edid sizing [ Upstream commit 8155566a26b8d6c1dd914f06a0c652e4e2f2adf1 ] The comment in the vbios structure says: // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128 This fake edid struct has not been used in a long time, so I'm not sure if there were actually any boards out there with a non-128 byte EDID, but align the code with the comment. Reviewed-by: Thomas Weißschuh <[email protected]> Reported-by: Thomas Weißschuh <[email protected]> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Paulo Miguel Almeida <[email protected]> Date: Sat Oct 29 14:30:44 2022 +1300 drm/amdgpu: Replace one-element array with flexible-array member [ Upstream commit 320e2590e281d0a7865e861f50155b5b435e9813 ] One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and refactor the rest of the code accordingly. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by: Paulo Miguel Almeida <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Stable-dep-of: 8155566a26b8 ("drm/amdgpu: properly handle vbios fake edid sizing") Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Mon Feb 12 13:55:34 2024 -0800 drm/crtc: fix uninitialized variable use even harder [ Upstream commit b6802b61a9d0e99dcfa6fff7c50db7c48a9623d3 ] DRM_MODESET_LOCK_ALL_BEGIN() has a hidden trap-door (aka retry loop), which means we can't rely too much on variable initializers. Fixes: 6e455f5dcdd1 ("drm/crtc: fix uninitialized variable use") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # sc7180, sdm845 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vladimir Lypak <[email protected]> Date: Sun Sep 1 13:54:00 2024 +0000 drm/msm/a5xx: disable preemption in submits by default [ Upstream commit db9dec2db76146d65e1cfbb6afb2e2bd5dab67f8 ] Fine grain preemption (switching from/to points within submits) requires extra handling in command stream of those submits, especially when rendering with tiling (using GMEM). However this handling is missing at this point in mesa (and always was). For this reason we get random GPU faults and hangs if more than one priority level is used because local preemption is enabled prior to executing command stream from submit. With that said it was ahead of time to enable local preemption by default considering the fact that even on downstream kernel it is only enabled if requested via UAPI. Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register") Signed-off-by: Vladimir Lypak <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/612041/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vladimir Lypak <[email protected]> Date: Sun Sep 1 13:54:02 2024 +0000 drm/msm/a5xx: fix races in preemption evaluation stage [ Upstream commit ce050f307ad93bcc5958d0dd35fc276fd394d274 ] On A5XX GPUs when preemption is used it's invietable to enter a soft lock-up state in which GPU is stuck at empty ring-buffer doing nothing. This appears as full UI lockup and not detected as GPU hang (because it's not). This happens due to not triggering preemption when it was needed. Sometimes this state can be recovered by some new submit but generally it won't happen because applications are waiting for old submits to retire. One of the reasons why this happens is a race between a5xx_submit and a5xx_preempt_trigger called from IRQ during submit retire. Former thread updates ring->cur of previously empty and not current ring right after latter checks it for emptiness. Then both threads can just exit because for first one preempt_state wasn't NONE yet and for second one all rings appeared to be empty. To prevent such situations from happening we need to establish guarantee for preempt_trigger to make decision after each submit or retire. To implement this we serialize preemption initiation using spinlock. If switch is already in progress we need to re-trigger preemption when it finishes. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/612045/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vladimir Lypak <[email protected]> Date: Sun Sep 1 13:54:01 2024 +0000 drm/msm/a5xx: properly clear preemption records on resume [ Upstream commit 64fd6d01a52904bdbda0ce810a45a428c995a4ca ] Two fields of preempt_record which are used by CP aren't reset on resume: "data" and "info". This is the reason behind faults which happen when we try to switch to the ring that was active last before suspend. In addition those faults can't be recovered from because we use suspend and resume to do so (keeping values of those fields again). Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/612043/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vladimir Lypak <[email protected]> Date: Sun Sep 1 13:54:03 2024 +0000 drm/msm/a5xx: workaround early ring-buffer emptiness check [ Upstream commit a30f9f65b5ac82d4390548c32ed9c7f05de7ddf5 ] There is another cause for soft lock-up of GPU in empty ring-buffer: race between GPU executing last commands and CPU checking ring for emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS event and RPTR shadow (which is used to check ring emptiness) is updated a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its last commands slow enough or we check that ring too fast we will miss a chance to trigger switch to lower priority ring because current ring isn't empty just yet. This can escalate to lock-up situation described in previous patch. To work-around this issue we keep track of last submit sequence number for each ring and compare it with one written to memptrs from GPU during execution of CACHE_FLUSH_TS event. Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Vladimir Lypak <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/612047/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Tue Jul 16 09:06:30 2024 -0700 drm/msm/adreno: Fix error return if missing firmware-name [ Upstream commit 624ab9cde26a9f150b4fd268b0f3dae3184dc40c ] -ENODEV is used to signify that there is no zap shader for the platform, and the CPU can directly take the GPU out of secure mode. We want to use this return code when there is no zap-shader node. But not when there is, but without a firmware-name property. This case we want to treat as-if the needed fw is not found. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Akhil P Oommen <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/604564/ Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Fri Oct 23 09:51:14 2020 -0700 drm/msm: Add priv->mm_lock to protect active/inactive lists [ Upstream commit d984457b31c4c53d2af374d5e78b3eb64debd483 ] Rather than relying on the big dev->struct_mutex hammer, introduce a more specific lock for protecting the bo lists. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Jordan Crouse <[email protected]> Reviewed-by: Kristian H. Kristensen <[email protected]> Signed-off-by: Rob Clark <[email protected]> Stable-dep-of: a30f9f65b5ac ("drm/msm/a5xx: workaround early ring-buffer emptiness check") Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Tue Nov 9 10:11:02 2021 -0800 drm/msm: Drop priv->lastctx [ Upstream commit 1d054c9b8457b56a651109fac21f56f46ccd46b2 ] cur_ctx_seqno already does the same thing, but handles the edge cases where a refcnt'd context can live after lastclose. So let's not have two ways to do the same thing. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Akhil P Oommen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]> Stable-dep-of: a30f9f65b5ac ("drm/msm/a5xx: workaround early ring-buffer emptiness check") Signed-off-by: Sasha Levin <[email protected]>
Author: Sherry Yang <[email protected]> Date: Tue Aug 27 09:53:37 2024 -0700 drm/msm: fix %s null argument error [ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ] The following build error was triggered because of NULL string argument: BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump': BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n", BUILDSTDERR: | ^~ BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=] This happens from the commit a61ddb4393ad ("drm: enable (most) W=1 warnings by default across the subsystem"). Using "(null)" instead to fix it. Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status") Signed-off-by: Sherry Yang <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/611071/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksandr Mishin <[email protected]> Date: Fri Jul 5 12:13:12 2024 +0300 drm/msm: Fix incorrect file name output in adreno_request_fw() [ Upstream commit e19366911340c2313a1abbb09c54eaf9bdea4f58 ] In adreno_request_fw() when debugging information is printed to the log after firmware load, an incorrect filename is printed. 'newname' is used instead of 'fwname', so prefix "qcom/" is being added to filename. Looks like "copy-paste" mistake. Fix this mistake by replacing 'newname' with 'fwname'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths") Signed-off-by: Aleksandr Mishin <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/602382/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Matthew Brost <[email protected]> Date: Thu Aug 1 08:41:17 2024 -0700 drm/printer: Allow NULL data in devcoredump printer [ Upstream commit 53369581dc0c68a5700ed51e1660f44c4b2bb524 ] We want to determine the size of the devcoredump before writing it out. To that end, we will run the devcoredump printer with NULL data to get the size, alloc data based on the generated offset, then run the devcorecump again with a valid data pointer to print. This necessitates not writing data to the data pointer on the initial pass, when it is NULL. v5: - Better commit message (Jonathan) - Add kerenl doc with examples (Jani) Cc: Maarten Lankhorst <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Jonathan Cavitt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Nikita Zhandarovich <[email protected]> Date: Tue Aug 6 10:19:04 2024 -0700 drm/radeon/evergreen_cs: fix int overflow errors in cs track offsets [ Upstream commit 3fbaf475a5b8361ebee7da18964db809e37518b7 ] Several cs track offsets (such as 'track->db_s_read_offset') either are initialized with or plainly take big enough values that, once shifted 8 bits left, may be hit with integer overflow if the resulting values end up going over u32 limit. Same goes for a few instances of 'surf.layer_size * mslice' multiplications that are added to 'offset' variable - they may potentially overflow as well and need to be validated properly. While some debug prints in this code section take possible overflow issues into account, simply casting to (unsigned long) may be erroneous in its own way, as depending on CPU architecture one is liable to get different results. Fix said problems by: - casting 'offset' to fixed u64 data type instead of ambiguous unsigned long. - casting one of the operands in vulnerable to integer overflow cases to u64. - adjust format specifiers in debug prints to properly represent 'offset' values. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11") Signed-off-by: Nikita Zhandarovich <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Tue Jul 30 17:58:12 2024 +0200 drm/radeon/r100: Handle unknown family in r100_cp_init_microcode() [ Upstream commit c6dbab46324b1742b50dc2fb5c1fee2c28129439 ] With -Werror: In function ‘r100_cp_init_microcode’, inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7: include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=] 465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__) | ^ include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’ 437 | _p_func(_fmt, ##__VA_ARGS__); \ | ^~~~~~~ include/linux/printk.h:508:9: note: in expansion of macro ‘printk’ 508 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) | ^~~~~~ drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’ 1062 | pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name); | ^~~~~~ Fix this by converting the if/else if/... construct into a proper switch() statement with a default to handle the error case. As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0 targeting arm32). Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Deucher <[email protected]> Date: Tue Jul 23 13:31:58 2024 -0400 drm/radeon: properly handle vbios fake edid sizing [ Upstream commit 17c6baff3d5f65c8da164137a58742541a060b2f ] The comment in the vbios structure says: // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128 This fake edid struct has not been used in a long time, so I'm not sure if there were actually any boards out there with a non-128 byte EDID, but align the code with the comment. Reviewed-by: Thomas Weißschuh <[email protected]> Reported-by: Thomas Weißschuh <[email protected]> Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html Fixes: c324acd5032f ("drm/radeon/kms: parse the extended LCD info block") Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Paulo Miguel Almeida <[email protected]> Date: Sat Oct 29 16:32:05 2022 +1300 drm/radeon: Replace one-element array with flexible-array member [ Upstream commit c81c5bd5cf2f428867e0bcfcccd4e4d2f8c68f51 ] One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and refactor the rest of the code accordingly. It's worth mentioning that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/239 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Paulo Miguel Almeida <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Stable-dep-of: 17c6baff3d5f ("drm/radeon: properly handle vbios fake edid sizing") Signed-off-by: Sasha Levin <[email protected]>
Author: Hugh Cole-Baker <[email protected]> Date: Tue Oct 19 22:58:41 2021 +0100 drm/rockchip: define gamma registers for RK3399 [ Upstream commit 3ba000d6ae999b99f29afd64814877a5c4406786 ] The VOP on RK3399 has a different approach from previous versions for setting a gamma lookup table, using an update_gamma_lut register. As this differs from RK3288, give RK3399 its own set of "common" register definitions. Signed-off-by: Hugh Cole-Baker <[email protected]> Tested-by: "Milan P. Stanić" <[email protected]> Tested-by: Linus Heckemann <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Stable-dep-of: 6b44aa559d6c ("drm/rockchip: vop: clear DMA stop bit on RK3066") Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Karlman <[email protected]> Date: Sat Jun 15 17:03:55 2024 +0000 drm/rockchip: dw_hdmi: Fix reading EDID when using a forced mode [ Upstream commit a5d024541ec466f428e6c514577d511a40779c7b ] EDID cannot be read on RK3328 until after read_hpd has been called and correct io voltage has been configured based on connection status. When a forced mode is used, e.g. video=1920x1080@60e, the connector detect ops, that in turn normally calls the read_hpd, never gets called. This result in reading EDID to fail in connector get_modes ops. Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to correct io voltage and allow reading EDID after setup_hpd. Fixes: 1c53ba8f22a1 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328") Signed-off-by: Jonas Karlman <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Hugh Cole-Baker <[email protected]> Date: Tue Oct 19 22:58:42 2021 +0100 drm/rockchip: support gamma control on RK3399 [ Upstream commit 7ae7a6211fe7251543796d5af971acb8c9e2da9e ] The RK3399 has a 1024-entry gamma LUT with 10 bits per component on its "big" VOP and a 256-entry, 8 bit per component LUT on the "little" VOP. Compared to the RK3288, it no longer requires disabling gamma while updating the LUT. On the RK3399, the LUT can be updated at any time as the hardware has two LUT buffers, one can be written while the other is in use. A swap of the buffers is triggered by writing 1 to the update_gamma_lut register. Signed-off-by: Hugh Cole-Baker <[email protected]> Tested-by: "Milan P. Stanić" <[email protected]> Tested-by: Linus Heckemann <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Stable-dep-of: 6b44aa559d6c ("drm/rockchip: vop: clear DMA stop bit on RK3066") Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Bee <[email protected]> Date: Sat Jun 15 17:03:54 2024 +0000 drm/rockchip: vop: Allow 4096px width scaling [ Upstream commit 0ef968d91a20b5da581839f093f98f7a03a804f7 ] There is no reason to limit VOP scaling to 3840px width, the limit of RK3288, when there are newer VOP versions that support 4096px width. Change to enforce a maximum of 4096px width plane scaling, the maximum supported output width of the VOP versions supported by this driver. Fixes: 4c156c21c794 ("drm/rockchip: vop: support plane scale") Signed-off-by: Alex Bee <[email protected]> Signed-off-by: Jonas Karlman <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Val Packett <[email protected]> Date: Mon Jun 24 17:40:48 2024 -0300 drm/rockchip: vop: clear DMA stop bit on RK3066 [ Upstream commit 6b44aa559d6c7f4ea591ef9d2352a7250138d62a ] The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame and needs the driver to acknowledge that by clearing the bit. Unless we clear it "between" frames, the RGB output only shows noise instead of the picture. atomic_flush is the place for it that least affects other code (doing it on vblank would require converting all other usages of the reg_lock to spin_(un)lock_irq, which would affect performance for everyone). This seems to be a redundant synchronization mechanism that was removed in later iterations of the VOP hardware block. Fixes: f4a6de855eae ("drm: rockchip: vop: add rk3066 vop definitions") Cc: [email protected] Signed-off-by: Val Packett <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Tvrtko Ursulin <[email protected]> Date: Fri Sep 13 17:05:52 2024 +0100 drm/sched: Add locking to drm_sched_entity_modify_sched commit 4286cc2c953983d44d248c9de1c81d3a9643345c upstream. Without the locking amdgpu currently can race between amdgpu_ctx_set_entity_priority() (via drm_sched_entity_modify_sched()) and drm_sched_job_arm(), leading to the latter accesing potentially inconsitent entity->sched_list and entity->num_sched_list pair. v2: * Improve commit message. (Philipp) Signed-off-by: Tvrtko Ursulin <[email protected]> Fixes: b37aced31eb0 ("drm/scheduler: implement a function to modify sched list") Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Luben Tuikov <[email protected]> Cc: Matthew Brost <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: Philipp Stanner <[email protected]> Cc: <[email protected]> # v5.7+ Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Sat Jan 6 17:54:32 2024 +0100 drm/stm: Fix an error handling path in stm_drm_platform_probe() [ Upstream commit ce7c90bfda2656418c69ba0dd8f8a7536b8928d4 ] If drm_dev_register() fails, a call to drv_load() must be undone, as already done in the remove function. Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Raphael Gallais-Pou <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20fff7f853f20a48a96db8ff186124470ec4d976.1704560028.git.christophe.jaillet@wanadoo.fr Signed-off-by: Raphael Gallais-Pou <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Mon Sep 23 09:58:14 2024 +0200 drm: Consistently use struct drm_mode_rect for FB_DAMAGE_CLIPS commit 8b0d2f61545545ab5eef923ed6e59fc3be2385e0 upstream. FB_DAMAGE_CLIPS is a plane property for damage handling. Its UAPI should only use UAPI types. Hence replace struct drm_rect with struct drm_mode_rect in drm_atomic_plane_set_property(). Both types are identical in practice, so there's no change in behavior. Reported-by: Ville Syrjälä <[email protected]> Closes: https://lore.kernel.org/dri-devel/[email protected]/ Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update") Cc: Lukasz Spintzyk <[email protected]> Cc: Deepak Rawat <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Thomas Hellstrom <[email protected]> Cc: David Airlie <[email protected]> Cc: Simona Vetter <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.0+ Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: hongchi.peng <[email protected]> Date: Mon Aug 26 10:45:17 2024 +0800 drm: komeda: Fix an issue related to normalized zpos [ Upstream commit 258905cb9a6414be5c9ca4aa20ef855f8dc894d4 ] We use komeda_crtc_normalize_zpos to normalize zpos of affected planes to their blending zorder in CU. If there's only one slave plane in affected planes and its layer_split property is enabled, order++ for its split layer, so that when calculating the normalized_zpos of master planes, the split layer of the slave plane is included, but the max_slave_zorder does not include the split layer and keep zero because there's only one slave plane in affacted planes, although we actually use two slave layers in this commit. In most cases, this bug does not result in a commit failure, but assume the following situation: slave_layer 0: zpos = 0, layer split enabled, normalized_zpos = 0;(use slave_layer 2 as its split layer) master_layer 0: zpos = 2, layer_split enabled, normalized_zpos = 2;(use master_layer 2 as its split layer) master_layer 1: zpos = 4, normalized_zpos = 4; master_layer 3: zpos = 5, normalized_zpos = 5; kcrtc_st->max_slave_zorder = 0; When we use master_layer 3 as a input of CU in function komeda_compiz_set_input and check it with function komeda_component_check_input, the parameter idx is equal to normailzed_zpos minus max_slave_zorder, the value of idx is 5 and is euqal to CU's max_active_inputs, so that komeda_component_check_input returns a -EINVAL value. To fix the bug described above, when calculating the max_slave_zorder with the layer_split enabled, count the split layer in this calculation directly. Signed-off-by: hongchi.peng <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Ma Ke <[email protected]> Date: Thu Aug 8 14:13:36 2024 +0800 drm: omapdrm: Add missing check for alloc_ordered_workqueue commit e794b7b9b92977365c693760a259f8eef940c536 upstream. As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. Cc: [email protected] Fixes: 2f95bc6d324a ("drm: omapdrm: Perform initialization/cleanup at probe/remove time") Signed-off-by: Ma Ke <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ard Biesheuvel <[email protected]> Date: Thu Sep 12 17:45:49 2024 +0200 efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption commit 77d48d39e99170b528e4f2e9fc5d1d64cdedd386 upstream. The TPM event log table is a Linux specific construct, where the data produced by the GetEventLog() boot service is cached in memory, and passed on to the OS using an EFI configuration table. The use of EFI_LOADER_DATA here results in the region being left unreserved in the E820 memory map constructed by the EFI stub, and this is the memory description that is passed on to the incoming kernel by kexec, which is therefore unaware that the region should be reserved. Even though the utility of the TPM2 event log after a kexec is questionable, any corruption might send the parsing code off into the weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY instead, which is always treated as reserved by the E820 conversion logic. Cc: <[email protected]> Reported-by: Breno Leitao <[email protected]> Tested-by: Usama Arif <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yuezhang Mo <[email protected]> Date: Tue Sep 3 15:01:09 2024 +0800 exfat: fix memory leak in exfat_load_bitmap() commit d2b537b3e533f28e0d97293fe9293161fe8cd137 upstream. If the first directory entry in the root directory is not a bitmap directory entry, 'bh' will not be released and reassigned, which will cause a memory leak. Fixes: 1e49a94cf707 ("exfat: add bitmap operations") Cc: [email protected] Signed-off-by: Yuezhang Mo <[email protected]> Reviewed-by: Aoyama Wataru <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:26 2024 +0800 ext4: aovid use-after-free in ext4_ext_insert_extent() commit a164f3a432aae62ca23d03e6d926b122ee5b860d upstream. As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem. Reported-by: Ojaswin Mujoo <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Fixes: 10809df84a4d ("ext4: teach ext4_ext_find_extent() to realloc path if necessary") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Tue Aug 20 21:22:28 2024 +0800 ext4: avoid buffer_head leak in ext4_mark_inode_used() [ Upstream commit 5e5b2a56c57def1b41efd49596621504d7bcc61c ] Release inode_bitmap_bh from ext4_read_inode_bitmap() in ext4_mark_inode_used() to avoid buffer_head leak. By the way, remove unneeded goto for invalid ino when inode_bitmap_bh is NULL. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Kemeng Shi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Tue Aug 20 21:22:30 2024 +0800 ext4: avoid negative min_clusters in find_group_orlov() [ Upstream commit bb0a12c3439b10d88412fd3102df5b9a6e3cd6dc ] min_clusters is signed integer and will be converted to unsigned integer when compared with unsigned number stats.free_clusters. If min_clusters is negative, it will be converted to a huge unsigned value in which case all groups may not meet the actual desired free clusters. Set negative min_clusters to 0 to avoid unexpected behavior. Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Signed-off-by: Kemeng Shi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thadeu Lima de Souza Cascardo <[email protected]> Date: Wed Aug 21 12:23:24 2024 -0300 ext4: avoid OOB when system.data xattr changes underneath the filesystem [ Upstream commit c6b72f5d82b1017bad80f9ebf502832fc321d796 ] When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 </TASK> Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem. Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=0c2508114d912a54ee79 Fixes: e8e948e7802a ("ext4: let ext4_find_entry handle inline data") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Tue Aug 20 21:22:29 2024 +0800 ext4: avoid potential buffer_head leak in __ext4_new_inode() [ Upstream commit 227d31b9214d1b9513383cf6c7180628d4b3b61f ] If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode bitmap buffer_head was successfully verified, then __ext4_new_inode() will get a valid inode_bitmap_bh of a corrupted group from ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release. Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like how ext4_free_inode() does to avoid buffer_head leak. Fixes: 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") Signed-off-by: Kemeng Shi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:24 2024 +0800 ext4: avoid use-after-free in ext4_ext_show_leaf() [ Upstream commit 4e2524ba2ca5f54bdbb9e5153bea00421ef653f5 ] In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality. Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ojaswin Mujoo <[email protected]> Tested-by: Ojaswin Mujoo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: yangerkun <[email protected]> Date: Sat Aug 17 16:55:10 2024 +0800 ext4: clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT even mount with discard [ Upstream commit 20cee68f5b44fdc2942d20f3172a262ec247b117 ] Commit 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") speed up fstrim by skipping trim trimmed group. We also has the chance to clear trimmed once there exists some block free for this group(mount without discard), and the next trim for this group will work well too. For mount with discard, we will issue dicard when we free blocks, so leave trimmed flag keep alive to skip useless trim trigger from userspace seems reasonable. But for some case like ext4 build on dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4 maybe unaligned for dm thinpool, and thinpool will just finish this discard(see process_discard_bio when begein equals to end) without actually process discard. For this case, trim from userspace can really help us to free some thinpool block. So convert to clear trimmed flag for all case no matter mounted with discard or not. Fixes: 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info") Signed-off-by: yangerkun <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhihao Cheng <[email protected]> Date: Fri Aug 9 20:15:32 2024 +0800 ext4: dax: fix overflowing extents beyond inode size when partially writing [ Upstream commit dda898d7ffe85931f9cca6d702a51f33717c501e ] The dax_iomap_rw() does two things in each iteration: map written blocks and copy user data to blocks. If the process is killed by user(See signal handling in dax_iomap_iter()), the copied data will be returned and added on inode size, which means that the length of written extents may exceed the inode size, then fsck will fail. An example is given as: dd if=/dev/urandom of=file bs=4M count=1 dax_iomap_rw iomap_iter // round 1 ext4_iomap_begin ext4_iomap_alloc // allocate 0~2M extents(written flag) dax_iomap_iter // copy 2M data iomap_iter // round 2 iomap_iter_advance iter->pos += iter->processed // iter->pos = 2M ext4_iomap_begin ext4_iomap_alloc // allocate 2~4M extents(written flag) dax_iomap_iter fatal_signal_pending done = iter->pos - iocb->ki_pos // done = 2M ext4_handle_inode_extension ext4_update_inode_size // inode size = 2M fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix? Fix the problem by truncating extents if the written length is smaller than expected. Fixes: 776722e85d3b ("ext4: DAX iomap write support") CC: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=219136 Signed-off-by: Zhihao Cheng <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhihao Cheng <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:27 2024 +0800 ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free commit 5c0f4cc84d3a601c99bc5e6e6eb1cbda542cce95 upstream. When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ojaswin Mujoo <[email protected]> Tested-by: Ojaswin Mujoo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thadeu Lima de Souza Cascardo <[email protected]> Date: Wed Aug 21 12:23:21 2024 -0300 ext4: ext4_search_dir should return a proper error [ Upstream commit cd69f8f9de280e331c9e6ff689ced0a688a9ce8f ] ext4_search_dir currently returns -1 in case of a failure, while it returns 0 when the name is not found. In such failure cases, it should return an error code instead. This becomes even more important when ext4_find_inline_entry returns an error code as well in the next commit. -EFSCORRUPTED seems appropriate as such error code as these failures would be caused by unexpected record lengths and is in line with other instances of ext4_check_dir_entry failures. In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was left as is to reduce the risk of regressions. Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:28 2024 +0800 ext4: fix double brelse() the buffer of the extents path commit dcaa6c31134c0f515600111c38ed7750003e1b9c upstream. In ext4_ext_try_to_merge_up(), set path[1].p_bh to NULL after it has been released, otherwise it may be released twice. An example of what triggers this is as follows: split2 map split1 |--------|-------|--------| ext4_ext_map_blocks ext4_ext_handle_unwritten_extents ext4_split_convert_extents // path->p_depth == 0 ext4_split_extent // 1. do split1 ext4_split_extent_at |ext4_ext_insert_extent | ext4_ext_create_new_leaf | ext4_ext_grow_indepth | le16_add_cpu(&neh->eh_depth, 1) | ext4_find_extent | // return -ENOMEM |// get error and try zeroout |path = ext4_find_extent | path->p_depth = 1 |ext4_ext_try_to_merge | ext4_ext_try_to_merge_up | path->p_depth = 0 | brelse(path[1].p_bh) ---> not set to NULL here |// zeroout success // 2. update path ext4_find_extent // 3. do split2 ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth le16_add_cpu(&neh->eh_depth, 1) ext4_find_extent path[0].p_bh = NULL; path->p_depth = 1 read_extent_tree_block ---> return err // path[1].p_bh is still the old value ext4_free_ext_path ext4_ext_drop_refs // path->p_depth == 1 brelse(path[1].p_bh) ---> brelse a buffer twice Finally got the following WARRNING when removing the buffer from lru: ============================================ VFS: brelse: Trying to free free buffer WARNING: CPU: 2 PID: 72 at fs/buffer.c:1241 __brelse+0x58/0x90 CPU: 2 PID: 72 Comm: kworker/u19:1 Not tainted 6.9.0-dirty #716 RIP: 0010:__brelse+0x58/0x90 Call Trace: <TASK> __find_get_block+0x6e7/0x810 bdev_getblk+0x2b/0x480 __ext4_get_inode_loc+0x48a/0x1240 ext4_get_inode_loc+0xb2/0x150 ext4_reserve_inode_write+0xb7/0x230 __ext4_mark_inode_dirty+0x144/0x6a0 ext4_ext_insert_extent+0x9c8/0x3230 ext4_ext_map_blocks+0xf45/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ============================================ Fixes: ecb94f5fdf4b ("ext4: collapse a single extent tree block into the inode if possible") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ojaswin Mujoo <[email protected]> Tested-by: Ojaswin Mujoo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Artem Sadovnikov <[email protected]> Date: Thu Aug 29 15:22:09 2024 +0000 ext4: fix i_data_sem unlock order in ext4_ind_migrate() [ Upstream commit cc749e61c011c255d81b192a822db650c68b313f ] Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Co-developed-by: Mikhail Ukhin <[email protected]> Signed-off-by: Mikhail Ukhin <[email protected]> Signed-off-by: Artem Sadovnikov <[email protected]> Rule: add Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luis Henriques (SUSE) <[email protected]> Date: Wed Jul 24 17:11:16 2024 +0100 ext4: fix incorrect tid assumption in __jbd2_log_wait_for_space() commit 972090651ee15e51abfb2160e986fa050cfc7a40 upstream. Function __jbd2_log_wait_for_space() assumes that '0' is not a valid value for transaction IDs, which is incorrect. Don't assume that and invoke jbd2_log_wait_commit() if the journal had a committing transaction instead. Signed-off-by: Luis Henriques (SUSE) <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Luis Henriques (SUSE) <[email protected]> Date: Wed Jul 24 17:11:15 2024 +0100 ext4: fix incorrect tid assumption in ext4_wait_for_tail_page_commit() commit dd589b0f1445e1ea1085b98edca6e4d5dedb98d0 upstream. Function ext4_wait_for_tail_page_commit() assumes that '0' is not a valid value for transaction IDs, which is incorrect. Don't assume that and invoke jbd2_log_wait_commit() if the journal had a committing transaction instead. Signed-off-by: Luis Henriques (SUSE) <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: zhanchengbin <[email protected]> Date: Tue Jan 3 10:28:12 2023 +0800 ext4: fix inode tree inconsistency caused by ENOMEM commit 3f5424790d4377839093b68c12b130077a4e4510 upstream. If ENOMEM fails when the extent is splitting, we need to restore the length of the split extent. In the ext4_split_extent_at function, only in ext4_ext_create_new_leaf will it alloc memory and change the shape of the extent tree,even if an ENOMEM is returned at this time, the extent tree is still self-consistent, Just restore the split extent lens in the function ext4_split_extent_at. ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf 1)ext4_ext_split ext4_find_extent 2)ext4_ext_grow_indepth ext4_find_extent Signed-off-by: zhanchengbin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: Baokun Li <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:23 2024 +0800 ext4: fix slab-use-after-free in ext4_split_extent_at() commit c26ab35702f8cd0cdc78f96aa5856bfb77be798f upstream. We hit the following use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in ext4_split_extent_at+0xba8/0xcc0 Read of size 2 at addr ffff88810548ed08 by task kworker/u20:0/40 CPU: 0 PID: 40 Comm: kworker/u20:0 Not tainted 6.9.0-dirty #724 Call Trace: <TASK> kasan_report+0x93/0xc0 ext4_split_extent_at+0xba8/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Allocated by task 40: __kmalloc_noprof+0x1ac/0x480 ext4_find_extent+0xf3b/0x1e70 ext4_ext_map_blocks+0x188/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] Freed by task 40: kfree+0xf1/0x2b0 ext4_find_extent+0xa71/0x1e70 ext4_ext_insert_extent+0xa22/0x3260 ext4_split_extent_at+0x3ef/0xcc0 ext4_split_extent.isra.0+0x18f/0x500 ext4_split_convert_extents+0x275/0x750 ext4_ext_handle_unwritten_extents+0x73e/0x1580 ext4_ext_map_blocks+0xe20/0x2dc0 ext4_map_blocks+0x724/0x1700 ext4_do_writepages+0x12d6/0x2a70 [...] ================================================================== The flow of issue triggering is as follows: ext4_split_extent_at path = *ppath ext4_ext_insert_extent(ppath) ext4_ext_create_new_leaf(ppath) ext4_find_extent(orig_path) path = *orig_path read_extent_tree_block // return -ENOMEM or -EIO ext4_free_ext_path(path) kfree(path) *orig_path = NULL a. If err is -ENOMEM: ext4_ext_dirty(path + path->p_depth) // path use-after-free !!! b. If err is -EIO and we have EXT_DEBUG defined: ext4_ext_show_leaf(path) eh = path[depth].p_hdr // path also use-after-free !!! So when trying to zeroout or fix the extent length, call ext4_find_extent() to update the path. In addition we use *ppath directly as an ext4_ext_show_leaf() input to avoid possible use-after-free when EXT_DEBUG is defined, and to avoid unnecessary path updates. Fixes: dfe5080939ea ("ext4: drop EXT4_EX_NOFREE_ON_ERR from rest of extents handling code") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ojaswin Mujoo <[email protected]> Tested-by: Ojaswin Mujoo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jan Kara <[email protected]> Date: Thu Nov 30 10:56:53 2023 +0100 ext4: fix warning in ext4_dio_write_end_io() commit 619f75dae2cf117b1d07f27b046b9ffb071c4685 upstream. The syzbot has reported that it can hit the warning in ext4_dio_write_end_io() because i_size < i_disksize. Indeed the reproducer creates a race between DIO IO completion and truncate expanding the file and thus ext4_dio_write_end_io() sees an inconsistent inode state where i_disksize is already updated but i_size is not updated yet. Since we are careful when setting up DIO write and consider it extending (and thus performing the IO synchronously with i_rwsem held exclusively) whenever it goes past either of i_size or i_disksize, we can use the same test during IO completion without risking entering ext4_handle_inode_extension() without i_rwsem held. This way we make it obvious both i_size and i_disksize are large enough when we report DIO completion without relying on unreliable WARN_ON. Reported-by: <[email protected]> Fixes: 91562895f803 ("ext4: properly sync file size update after O_SYNC direct IO") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wojciech Gładysz <[email protected]> Date: Thu Aug 1 16:38:27 2024 +0200 ext4: nested locking for xattr inode [ Upstream commit d1bc560e9a9c78d0b2314692847fc8661e0aeb99 ] Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Edward Adam Davis <[email protected]> Date: Mon Jul 1 22:25:03 2024 +0800 ext4: no need to continue when the number of entries is 1 commit 1a00a393d6a7fb1e745a41edd09019bd6a0ad64c upstream. Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Signed-off-by: Edward Adam Davis <[email protected]> Reported-and-tested-by: [email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:30 2024 +0800 ext4: propagate errors from ext4_find_extent() in ext4_insert_range() commit 369c944ed1d7c3fb7b35f24e4735761153afe7b3 upstream. Even though ext4_find_extent() returns an error, ext4_insert_range() still returns 0. This may confuse the user as to why fallocate returns success, but the contents of the file are not as expected. So propagate the error returned by ext4_find_extent() to avoid inconsistencies. Fixes: 331573febb6a ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ojaswin Mujoo <[email protected]> Tested-by: Ojaswin Mujoo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jan Kara <[email protected]> Date: Fri Oct 13 14:13:50 2023 +0200 ext4: properly sync file size update after O_SYNC direct IO [ Upstream commit 91562895f8030cb9a0470b1db49de79346a69f91 ] Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly sync file size update and thus if we crash at unfortunate moment, the file can have smaller size although O_SYNC IO has reported successful completion. The problem happens because update of on-disk inode size is handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus dio_complete() in particular) has returned and generic_file_sync() gets called by dio_complete(). Fix the problem by handling on-disk inode size update directly in our ->end_io completion handler. References: https://lore.kernel.org/all/[email protected] Reported-by: Gao Xiang <[email protected]> CC: [email protected] Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure") Signed-off-by: Jan Kara <[email protected]> Tested-by: Joseph Qi <[email protected]> Reviewed-by: "Ritesh Harjani (IBM)" <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Stable-dep-of: dda898d7ffe8 ("ext4: dax: fix overflowing extents beyond inode size when partially writing") Signed-off-by: Sasha Levin <[email protected]>
Author: Thadeu Lima de Souza Cascardo <[email protected]> Date: Wed Aug 21 12:23:22 2024 -0300 ext4: return error on ext4_find_inline_entry [ Upstream commit 4d231b91a944f3cab355fce65af5871fb5d7735b ] In case of errors when reading an inode from disk or traversing inline directory entries, return an error-encoded ERR_PTR instead of returning NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns such encoded errors. Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem") Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Aug 22 10:35:25 2024 +0800 ext4: update orig_path in ext4_find_extent() commit 5b4b2dcace35f618fe361a87bae6f0d13af31bc1 upstream. In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: <TASK> ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath. Fixes: 10809df84a4d ("ext4: teach ext4_ext_find_extent() to realloc path if necessary") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Nikita Zhandarovich <[email protected]> Date: Wed Jul 24 10:51:58 2024 -0700 f2fs: avoid potential int overflow in sanity_check_area_boundary() commit 50438dbc483ca6a133d2bce9d5d6747bcee38371 upstream. While calculating the end addresses of main area and segment 0, u32 may be not enough to hold the result without the danger of int overflow. Just in case, play it safe and cast one of the operands to a wider type (u64). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: fd694733d523 ("f2fs: cover large section in sanity check of super") Cc: [email protected] Signed-off-by: Nikita Zhandarovich <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chao Yu <[email protected]> Date: Fri Dec 25 16:52:27 2020 +0800 f2fs: enhance to update i_mode and acl atomically in f2fs_setattr() [ Upstream commit 17232e830afb800acdcc22ae8980bf9d330393ef ] Previously, in f2fs_setattr(), we don't update S_ISUID|S_ISGID|S_ISVTX bits with S_IRWXUGO bits and acl entries atomically, so in error path, chmod() may partially success, this patch enhances to make chmod() flow being atomical. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin <[email protected]>
Author: Chao Yu <[email protected]> Date: Wed Jul 19 21:50:45 2023 +0800 f2fs: fix to update i_ctime in __f2fs_setxattr() [ Upstream commit 8874ad7dae8d91d24cc87c545c0073b3b2da5688 ] generic/728 - output mismatch (see /media/fstests/results//generic/728.out.bad) --- tests/generic/728.out 2023-07-19 07:10:48.362711407 +0000 +++ /media/fstests/results//generic/728.out.bad 2023-07-19 08:39:57.000000000 +0000 QA output created by 728 +Expected ctime to change after setxattr. +Expected ctime to change after removexattr. Silence is golden ... (Run 'diff -u /media/fstests/tests/generic/728.out /media/fstests/results//generic/728.out.bad' to see the entire diff) generic/729 1s It needs to update i_ctime after {set,remove}xattr, fix it. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin <[email protected]>
Author: Yonggil Song <[email protected]> Date: Fri Sep 2 11:07:49 2022 +0900 f2fs: fix typo [ Upstream commit d382e36970ecf8242921400db2afde15fb6ed49e ] Fix typo in f2fs.h Detected by Jaeyoon Choi Signed-off-by: Yonggil Song <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin <[email protected]>
Author: Nikita Zhandarovich <[email protected]> Date: Wed Jul 24 10:05:44 2024 -0700 f2fs: prevent possible int overflow in dir_block_index() commit 47f268f33dff4a5e31541a990dc09f116f80e61c upstream. The result of multiplication between values derived from functions dir_buckets() and bucket_blocks() *could* technically reach 2^30 * 2^2 = 2^32. While unlikely to happen, it is prudent to ensure that it will not lead to integer overflow. Thus, use mul_u32_u32() as it's more appropriate to mitigate the issue. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 3843154598a0 ("f2fs: introduce large directory support") Cc: [email protected] Signed-off-by: Nikita Zhandarovich <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chao Yu <[email protected]> Date: Wed Jun 26 09:47:27 2024 +0800 f2fs: reduce expensive checkpoint trigger frequency [ Upstream commit aaf8c0b9ae042494cb4585883b15c1332de77840 ] We may trigger high frequent checkpoint for below case: 1. mkdir /mnt/dir1; set dir1 encrypted 2. touch /mnt/file1; fsync /mnt/file1 3. mkdir /mnt/dir2; set dir2 encrypted 4. touch /mnt/file2; fsync /mnt/file2 ... Although, newly created dir and file are not related, due to commit bbf156f7afa7 ("f2fs: fix lost xattrs of directories"), we will trigger checkpoint whenever fsync() comes after a new encrypted dir created. In order to avoid such performance regression issue, let's record an entry including directory's ino in global cache whenever we update directory's xattr data, and then triggerring checkpoint() only if xattr metadata of target file's parent was updated. This patch updates to cover below no encryption case as well: 1) parent is checkpointed 2) set_xattr(dir) w/ new xnid 3) create(file) 4) fsync(file) Fixes: bbf156f7afa7 ("f2fs: fix lost xattrs of directories") Reported-by: wangzijie <[email protected]> Reported-by: Zhiguo Niu <[email protected]> Tested-by: Zhiguo Niu <[email protected]> Reported-by: Yunlei He <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chao Yu <[email protected]> Date: Wed Jul 19 21:50:46 2023 +0800 f2fs: remove unneeded check condition in __f2fs_setxattr() [ Upstream commit bc3994ffa4cf23f55171943c713366132c3ff45d ] It has checked return value of write_all_xattrs(), remove unneeded following check condition. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Stable-dep-of: aaf8c0b9ae04 ("f2fs: reduce expensive checkpoint trigger frequency") Signed-off-by: Sasha Levin <[email protected]>
Author: Jann Horn <[email protected]> Date: Fri Oct 4 19:36:43 2024 +0000 f2fs: Require FMODE_WRITE for atomic write ioctls commit 4f5a100f87f32cb65d4bb1ad282a08c92f6f591e upstream. The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything. Fixes: 88b88a667971 ("f2fs: support atomic writes") Cc: [email protected] Signed-off-by: Jann Horn <[email protected]> Reviewed-by: Chao Yu <[email protected]> Reviewed-by: Eric Biggers <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Thu Aug 1 22:34:39 2024 +0200 fbdev: hpfb: Fix an error handling path in hpfb_dio_probe() [ Upstream commit aa578e897520f32ae12bec487f2474357d01ca9c ] If an error occurs after request_mem_region(), a corresponding release_mem_region() should be called, as already done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kaixin Wang <[email protected]> Date: Wed Sep 11 22:29:52 2024 +0800 fbdev: pxafb: Fix possible use after free in pxafb_task() [ Upstream commit 4a6921095eb04a900e0000da83d9475eb958e61e ] In the pxafb_probe function, it calls the pxafb_init_fbinfo function, after which &fbi->task is associated with pxafb_task. Moreover, within this pxafb_init_fbinfo function, the pxafb_blank function within the &pxafb_ops struct is capable of scheduling work. If we remove the module which will call pxafb_remove to make cleanup, it will call unregister_framebuffer function which can call do_unregister_framebuffer to free fbi->fb through put_fb_info(fb_info), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | pxafb_task pxafb_remove | unregister_framebuffer(info) | do_unregister_framebuffer(fb_info) | put_fb_info(fb_info) | // free fbi->fb | set_ctrlr_state(fbi, state) | __pxafb_lcd_power(fbi, 0) | fbi->lcd_power(on, &fbi->fb.var) | //use fbi->fb Fix it by ensuring that the work is canceled before proceeding with the cleanup in pxafb_remove. Note that only root user can remove the driver at runtime. Signed-off-by: Kaixin Wang <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrey Shumilin <[email protected]> Date: Fri Sep 27 22:34:24 2024 +0300 fbdev: sisfb: Fix strbuf array overflow [ Upstream commit 9cf14f5a2746c19455ce9cb44341b5527b5e19c3 ] The values of the variables xres and yres are placed in strbuf. These variables are obtained from strbuf1. The strbuf1 array contains digit characters and a space if the array contains non-digit characters. Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres); more than 16 bytes will be written to strbuf. It is suggested to increase the size of the strbuf array to 24. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Shumilin <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Fri Aug 16 15:57:21 2024 +0200 firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp() commit 9c3a62c20f7fb00294a4237e287254456ba8a48b upstream. mbox_client_to_bpmp() is not used, W=1 builds: drivers/firmware/tegra/bpmp.c:28:1: error: unused function 'mbox_client_to_bpmp' [-Werror,-Wunused-function] Fixes: cdfa358b248e ("firmware: tegra: Refactor BPMP driver") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jann Horn <[email protected]> Date: Wed Aug 28 01:45:48 2024 +0200 firmware_loader: Block path traversal commit f0e5311aa8022107d63c54e2f03684ec097d1394 upstream. Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously. Cc: [email protected] Reviewed-by: Danilo Krummrich <[email protected]> Fixes: abb139e75c2c ("firmware: teach the kernel to load firmware files directly from the filesystem") Signed-off-by: Jann Horn <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Muhammad Usama Anjum <[email protected]> Date: Fri Sep 6 15:28:39 2024 +0500 fou: fix initialization of grc [ Upstream commit 4c8002277167125078e6b9b90137bdf443ebaa08 ] The grc must be initialize first. There can be a condition where if fou is NULL, goto out will be executed and grc would be used uninitialized. Fixes: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.") Signed-off-by: Muhammad Usama Anjum <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andy Shevchenko <[email protected]> Date: Tue Mar 14 17:09:06 2023 +0200 fs/namespace: fnic: Switch to use %ptTd [ Upstream commit 74e60b8b2f0fe3702710e648a31725ee8224dbdf ] Use %ptTd instead of open-coded variant to print contents of time64_t type in human readable form. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Christian Brauner (Microsoft) <[email protected]> Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin <[email protected]>
Author: Christoph Hellwig <[email protected]> Date: Fri Nov 5 13:36:58 2021 -0700 fs: explicitly unregister per-superblock BDIs [ Upstream commit 0b3ea0926afb8dde70cfab00316ae0a70b93a7cc ] Add a new SB_I_ flag to mark superblocks that have an ephemeral bdi associated with them, and unregister it when the superblock is shut down. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Jan Kara <[email protected]> Cc: Miquel Raynal <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Vignesh Raghavendra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin <[email protected]>
Author: Mickaël Salaün <[email protected]> Date: Wed Aug 21 11:56:05 2024 +0200 fs: Fix file_set_fowner LSM hook inconsistencies commit 26f204380a3c182e5adf1a798db0724d6111b597 upstream. The fcntl's F_SETOWN command sets the process that handle SIGIO/SIGURG for the related file descriptor. Before this change, the file_set_fowner LSM hook was always called, ignoring the VFS logic which may not actually change the process that handles SIGIO (e.g. TUN, TTY, dnotify), nor update the related UID/EUID. Moreover, because security_file_set_fowner() was called without lock (e.g. f_owner.lock), concurrent F_SETOWN commands could result to a race condition and inconsistent LSM states (e.g. SELinux's fown_sid) compared to struct fown_struct's UID/EUID. This change makes sure the LSM states are always in sync with the VFS state by moving the security_file_set_fowner() call close to the UID/EUID updates and using the same f_owner.lock . Rename f_modown() to __f_setown() to simplify code. Cc: [email protected] Cc: Al Viro <[email protected]> Cc: Casey Schaufler <[email protected]> Cc: Christian Brauner <[email protected]> Cc: James Morris <[email protected]> Cc: Jann Horn <[email protected]> Cc: Ondrej Mosnacek <[email protected]> Cc: Paul Moore <[email protected]> Cc: Serge E. Hallyn <[email protected]> Cc: Stephen Smalley <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Mickaël Salaün <[email protected]> Signed-off-by: Paul Moore <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zheng Yejian <[email protected]> Date: Fri May 10 03:28:59 2024 +0800 ftrace: Fix possible use-after-free issue in ftrace_location() commit e60b613df8b6253def41215402f72986fee3fc8d upstream. KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem(). Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization") Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Zheng Yejian <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> [Shivani: Modified to apply on v5.10.y] Signed-off-by: Shivani Agarwal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Gal Pressman <[email protected]> Date: Thu Jun 6 23:32:48 2024 +0300 geneve: Fix incorrect inner network header offset when innerprotoinherit is set [ Upstream commit c6ae073f5903f6c6439d0ac855836a4da5c0a701 ] When innerprotoinherit is set, the tunneled packets do not have an inner Ethernet header. Change 'maclen' to not always assume the header length is ETH_HLEN, as there might not be a MAC header. This resolves issues with drivers (e.g. mlx5, in mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset to be correct, and use it for TX offloads. Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb") Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: c471236b2359 ("bareudp: Pull inner IP header on xmit.") Signed-off-by: Sasha Levin <[email protected]>
Author: Billy Tsai <[email protected]> Date: Tue Oct 8 16:14:44 2024 +0800 gpio: aspeed: Add the flush write to ensure the write complete. [ Upstream commit 1bb5a99e1f3fd27accb804aa0443a789161f843c ] Performing a dummy read ensures that the register write operation is fully completed, mitigating any potential bus delays that could otherwise impact the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on a delay function to ensure the clock frequency does not exceed 1 MHz. However, this can lead to rapid toggling of the GPIO because the write operation is POSTed and does not wait for a bus acknowledgment. Fixes: 361b79119a4b ("gpio: Add Aspeed driver") Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Billy Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Billy Tsai <[email protected]> Date: Tue Oct 8 16:14:45 2024 +0800 gpio: aspeed: Use devm_clk api to manage clock source [ Upstream commit a6191a3d18119184237f4ee600039081ad992320 ] Replace of_clk_get with devm_clk_get_enabled to manage the clock source. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Billy Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Emanuele Ghidoli <[email protected]> Date: Wed Aug 28 15:32:07 2024 +0200 gpio: davinci: fix lazy disable commit 3360d41f4ac490282fddc3ccc0b58679aa5c065d upstream. On a few platforms such as TI's AM69 device, disable_irq() fails to keep track of the interrupts that happen between disable_irq() and enable_irq() and those interrupts are missed. Use the ->irq_unmask() and ->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to correctly keep track of edges when disable_irq is called. This solves the issue of disable_irq() not working as expected on such platforms. Fixes: 23265442b02b ("ARM: davinci: irq_data conversion.") Signed-off-by: Emanuele Ghidoli <[email protected]> Signed-off-by: Parth Pancholi <[email protected]> Acked-by: Keerthy <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hagar Hemdan <[email protected]> Date: Thu May 23 08:53:32 2024 +0000 gpio: prevent potential speculation leaks in gpio_device_get_desc() commit d795848ecce24a75dfd46481aee066ae6fe39775 upstream. Userspace may trigger a speculative read of an address outside the gpio descriptor array. Users can do that by calling gpio_ioctl() with an offset out of range. Offset is copied from user and then used as an array index to get the gpio descriptor without sanitization in gpio_device_get_desc(). This change ensures that the offset is sanitized by using array_index_nospec() to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Signed-off-by: Hagar Hemdan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Hugo SIMELIERE <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kent Gibson <[email protected]> Date: Wed Jun 26 13:29:23 2024 +0800 gpiolib: cdev: Ignore reconfiguration without direction commit b440396387418fe2feaacd41ca16080e7a8bc9ad upstream. linereq_set_config() behaves badly when direction is not set. The configuration validation is borrowed from linereq_create(), where, to verify the intent of the user, the direction must be set to in order to effect a change to the electrical configuration of a line. But, when applied to reconfiguration, that validation does not allow for the unset direction case, making it possible to clear flags set previously without specifying the line direction. Adding to the inconsistency, those changes are not immediately applied by linereq_set_config(), but will take effect when the line value is next get or set. For example, by requesting a configuration with no flags set, an output line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN set could have those flags cleared, inverting the sense of the line and changing the line drive to push-pull on the next line value set. Skip the reconfiguration of lines for which the direction is not set, and only reconfigure the lines for which direction is set. Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL") Signed-off-by: Kent Gibson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: SurajSonawane2415 <[email protected]> Date: Fri Oct 4 13:29:44 2024 +0530 hid: intel-ish-hid: Fix uninitialized variable 'rv' in ish_fw_xfer_direct_dma commit d41bff05a61fb539f21e9bf0d39fac77f457434e upstream. Fix the uninitialized symbol 'rv' in the function ish_fw_xfer_direct_dma to resolve the following warning from the smatch tool: drivers/hid/intel-ish-hid/ishtp-fw-loader.c:714 ish_fw_xfer_direct_dma() error: uninitialized symbol 'rv'. Initialize 'rv' to 0 to prevent undefined behavior from uninitialized access. Cc: [email protected] Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver") Signed-off-by: SurajSonawane2415 <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wade Wang <[email protected]> Date: Mon Sep 16 16:56:00 2024 +0800 HID: plantronics: Workaround for an unexcepted opposite volume key commit 87b696209007b7c4ef7bdfe39ea0253404a43770 upstream. Some Plantronics headset as the below send an unexcept opposite volume key's HID report for each volume key press after 200ms, like unecepted Volume Up Key following Volume Down key pressed by user. This patch adds a quirk to hid-plantronics for these devices, which will ignore the second unexcepted opposite volume key if it happens within 220ms from the last one that was handled. Plantronics EncorePro 500 Series (047f:431e) Plantronics Blackwire_3325 Series (047f:430c) The patch was tested on the mentioned model, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected per test result. Cc: [email protected] Signed-off-by: Wade Wang <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Javier Carrasco <[email protected]> Date: Wed Oct 2 03:08:08 2024 +0200 hwmon: (adm9240) Add missing dependency on REGMAP_I2C [ Upstream commit 14849a2ec175bb8a2280ce20efe002bb19f1e274 ] This driver requires REGMAP_I2C to be selected in order to get access to regmap_config and devm_regmap_init_i2c. Add the missing dependency. Fixes: df885d912f67 ("hwmon: (adm9240) Convert to regmap") Signed-off-by: Javier Carrasco <[email protected]> Message-ID: <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guenter Roeck <[email protected]> Date: Sun Jul 21 06:41:17 2024 -0700 hwmon: (max16065) Fix alarm attributes [ Upstream commit 119abf7d1815f098f7f91ae7abc84324a19943d7 ] Chips reporting overcurrent alarms report it in the second alarm register. That means the second alarm register has to be read, even if the chip only supports 8 or fewer ADC channels. MAX16067 and MAX16068 report undervoltage and overvoltage alarms in separate registers. Fold register contents together to report both with the existing alarm attribute. This requires actually storing the chip type in struct max16065_data. Rename the variable 'chip' to match the variable name used in the probe function. Reviewed-by: Tzung-Bi Shih <[email protected]> Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles") Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guenter Roeck <[email protected]> Date: Thu Jul 18 09:52:01 2024 -0700 hwmon: (max16065) Fix overflows seen when writing limits [ Upstream commit 744ec4477b11c42e2c8de9eb8364675ae7a0bd81 ] Writing large limits resulted in overflows as reported by module tests. in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647] in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647] in0_min: Suspected overflow: [max=5538, read 0, written 2147483647] Fix the problem by clamping prior to multiplications and the use of DIV_ROUND_CLOSEST, and by using consistent variable types. Reviewed-by: Tzung-Bi Shih <[email protected]> Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles") Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrew Davis <[email protected]> Date: Wed Apr 3 15:36:21 2024 -0500 hwmon: (max16065) Remove use of i2c_match_id() [ Upstream commit 5a71654b398e3471f0169c266a3587cf09e1200c ] The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes") Signed-off-by: Sasha Levin <[email protected]>
Author: Yuntao Liu <[email protected]> Date: Thu Aug 15 08:30:21 2024 +0000 hwmon: (ntc_thermistor) fix module autoloading [ Upstream commit b6964d66a07a9003868e428a956949e17ab44d7e ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Fixes: 9e8269de100d ("hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver") Signed-off-by: Yuntao Liu <[email protected]> Message-ID: <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Patryk Biel <[email protected]> Date: Mon Sep 9 11:30:28 2024 +0200 hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2 [ Upstream commit 20471071f198c8626dbe3951ac9834055b387844 ] The current implementation of pmbus_show_boolean assumes that all devices support write-back operation of status register to clear pending warnings or faults. Since clearing individual bits in the status registers was only introduced in PMBus specification 1.2, this operation may not be supported by some older devices. This can result in an error while reading boolean attributes such as temp1_max_alarm. Fetch PMBus revision supported by the device and modify pmbus_show_boolean so that it only tries to clear individual status bits if the device is compliant with PMBus specs >= 1.2. Otherwise clear all fault indicators on the current page after a fault status was reported. Fixes: 35f165f08950a ("hwmon: (pmbus) Clear pmbus fault/warning bits after read") Signed-off-by: Patryk Biel <[email protected]> Message-ID: <[email protected]> [groeck: Rewrote description Moved revision detection code ahead of clear faults command Assigned revision if return value from PMBUS_REVISION command is 0 Improved return value check from calling _pmbus_write_byte_data()] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mårten Lindahl <[email protected]> Date: Thu Apr 28 16:40:36 2022 +0200 hwmon: (pmbus) Introduce and use write_byte_data callback [ Upstream commit 5de3e13f7f6b496bd7bd9ff4d2b915b7d3e67cda ] Some of the pmbus core functions uses pmbus_write_byte_data, which does not support driver callbacks for chip specific write operations. This could potentially influence some specific regulator chips that for example need a time delay before each data access. Lets add support for driver callback with _pmbus_write_byte_data. Signed-off-by: Mårten Lindahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Stable-dep-of: 20471071f198 ("hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2") Signed-off-by: Sasha Levin <[email protected]>
Author: Guenter Roeck <[email protected]> Date: Tue Oct 1 11:37:15 2024 -0700 hwmon: (tmp513) Add missing dependency on REGMAP_I2C [ Upstream commit 193bc02c664999581a1f38c152f379fce91afc0c ] 0-day reports: drivers/hwmon/tmp513.c:162:21: error: variable 'tmp51x_regmap_config' has initializer but incomplete type 162 | static const struct regmap_config tmp51x_regmap_config = { | ^ struct regmap_config is only available if REGMAP is enabled. Add the missing Kconfig dependency to fix the problem. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Cc: Eric Tremblay <[email protected]> Reviewed-by: Javier Carrasco <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gaosheng Cui <[email protected]> Date: Sat Aug 3 14:49:23 2024 +0800 hwrng: cctrng - Add missing clk_disable_unprepare in cctrng_resume commit 4b7acc85de14ee8a2236f54445dc635d47eceac0 upstream. Add the missing clk_disable_unprepare() before return in cctrng_resume(). Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver") Cc: <[email protected]> Signed-off-by: Gaosheng Cui <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Guoqing Jiang <[email protected]> Date: Mon Aug 26 15:04:15 2024 +0800 hwrng: mtk - Use devm_pm_runtime_enable commit 78cb66caa6ab5385ac2090f1aae5f3c19e08f522 upstream. Replace pm_runtime_enable with the devres-enabled version which can trigger pm_runtime_disable. Otherwise, the below appears during reload driver. mtk_rng 1020f000.rng: Unbalanced pm_runtime_enable! Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support") Cc: <[email protected]> Suggested-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Biju Das <[email protected]> Date: Wed Jun 7 17:57:38 2023 +0100 i2c: Add i2c_get_match_data() [ Upstream commit 564d73c4d9201526bd976b9379d2aaf1a7133e84 ] Add i2c_get_match_data() to get match data for I2C, ACPI and DT-based matching, so that we can optimize the driver code. Suggested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Biju Das <[email protected]> [wsa: simplified var initialization] Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes") Signed-off-by: Sasha Levin <[email protected]>
Author: Tommy Huang <[email protected]> Date: Wed Sep 11 17:39:51 2024 +0800 i2c: aspeed: Update the stop sw state when the bus recovery occurs commit 93701d3b84ac5f3ea07259d4ced405c53d757985 upstream. When the i2c bus recovery occurs, driver will send i2c stop command in the scl low condition. In this case the sw state will still keep original situation. Under multi-master usage, i2c bus recovery will be called when i2c transfer timeout occurs. Update the stop command calling with aspeed_i2c_do_stop function to update master_state. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Cc: [email protected] # v4.13+ Signed-off-by: Tommy Huang <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Mon Aug 12 22:39:48 2024 +0200 i2c: i801: Use a different adapter-name for IDF adapters [ Upstream commit 43457ada98c824f310adb7bd96bd5f2fcd9a3279 ] On chipsets with a second 'Integrated Device Function' SMBus controller use a different adapter-name for the second IDF adapter. This allows platform glue code which is looking for the primary i801 adapter to manually instantiate i2c_clients on to differentiate between the 2. This allows such code to find the primary i801 adapter by name, without needing to duplicate the PCI-ids to feature-flags mapping from i2c-i801.c. Reviewed-by: Pali Rohár <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andy Shevchenko <[email protected]> Date: Wed Sep 11 18:39:14 2024 +0300 i2c: isch: Add missed 'else' commit 1db4da55070d6a2754efeb3743f5312fc32f5961 upstream. In accordance with the existing comment and code analysis it is quite likely that there is a missed 'else' when adapter times out. Add it. Fixes: 5bc1200852c3 ("i2c: Add Intel SCH SMBus support") Signed-off-by: Andy Shevchenko <[email protected]> Cc: <[email protected]> # v2.6.27+ Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Thu Sep 12 11:34:59 2024 +0800 i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq() commit e2c85d85a05f16af2223fcc0195ff50a7938b372 upstream. disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Jinjie Ruan <[email protected]> Cc: <[email protected]> # v4.19+ Acked-by: Mukesh Kumar Savaliya <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Marek Vasut <[email protected]> Date: Mon Sep 30 21:27:41 2024 +0200 i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume commit 048bbbdbf85e5e00258dfb12f5e368f908801d7b upstream. In case there is any sort of clock controller attached to this I2C bus controller, for example Versaclock or even an AIC32x4 I2C codec, then an I2C transfer triggered from the clock controller clk_ops .prepare callback may trigger a deadlock on drivers/clk/clk.c prepare_lock mutex. This is because the clock controller first grabs the prepare_lock mutex and then performs the prepare operation, including its I2C access. The I2C access resumes this I2C bus controller via .runtime_resume callback, which calls clk_prepare_enable(), which attempts to grab the prepare_lock mutex again and deadlocks. Since the clock are already prepared since probe() and unprepared in remove(), use simple clk_enable()/clk_disable() calls to enable and disable the clock on runtime suspend and resume, to avoid hitting the prepare_lock mutex. Acked-by: Alain Volmat <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Fixes: 4e7bca6fc07b ("i2c: i2c-stm32f7: add PM Runtime support") Cc: <[email protected]> # v5.0+ Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Marek Vasut <[email protected]> Date: Mon Aug 23 23:41:40 2021 +0200 i2c: xiic: Fix broken locking on tx_msg [ Upstream commit c119e7d00c916881913011e6f4c6ac349a41e4e2 ] The tx_msg is set from multiple places, sometimes without locking, which fall apart on any SMP system. Only ever access tx_msg inside the driver mutex. Signed-off-by: Marek Vasut <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Mon Sep 23 11:42:50 2024 +0800 i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled [ Upstream commit 0c8d604dea437b69a861479b413d629bc9b3da70 ] It is not valid to call pm_runtime_set_suspended() for devices with runtime PM enabled because it returns -EAGAIN if it is enabled already and working. So, call pm_runtime_disable() before to fix it. Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management") Cc: <[email protected]> # v4.6+ Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Mon Aug 23 23:41:45 2021 +0200 i2c: xiic: Fix RX IRQ busy check [ Upstream commit 294b29f15469e90893c2b72a738a962ee02a12eb ] In case the XIIC does TX/RX transfer, make sure no other kernel thread can start another TX transfer at the same time. This could happen since the driver only checks tx_msg for being non-NULL and returns -EBUSY in that case, however it is necessary to check also rx_msg for the same. Signed-off-by: Marek Vasut <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin <[email protected]>
Author: Marc Ferland <[email protected]> Date: Mon May 13 12:03:24 2024 -0400 i2c: xiic: improve error message when transfer fails to start [ Upstream commit ee1691d0ae103ba7fd9439800ef454674fadad27 ] xiic_start_xfer can fail for different reasons: - EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg - ETIMEDOUT: timed-out trying to clear the RX fifo - EINVAL: wrong clock settings Both EINVAL and ETIMEDOUT will currently print a specific error message followed by a generic one, for example: Failed to clear rx fifo Error xiic_start_xfer however EBUSY will simply output the generic message: Error xiic_start_xfer which is not really helpful. This commit adds a new error message when a busy condition is detected and also removes the generic message since it does not provide any relevant information to the user. Signed-off-by: Marc Ferland <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Wed Sep 2 17:06:36 2020 +0200 i2c: xiic: Simplify with dev_err_probe() [ Upstream commit 9dbba3f87c7823cf35e63fb7a2449a5d54b3b799 ] Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 0c8d604dea43 ("i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled") Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Mon Aug 23 23:41:43 2021 +0200 i2c: xiic: Switch from waitqueue to completion [ Upstream commit fdacc3c7405d1fc33c1f2771699a4fc24551e480 ] There will never be threads queueing up in the xiic_xmit(), use completion synchronization primitive to wait for the interrupt handler thread to complete instead as it is much better fit and there is no need to overload it for this purpose. Signed-off-by: Marek Vasut <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin <[email protected]>
Author: Robert Hancock <[email protected]> Date: Wed Sep 11 22:16:53 2024 +0200 i2c: xiic: Try re-initialization on bus busy timeout [ Upstream commit 1d4a1adbed2582444aaf97671858b7d12915bd05 ] In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <[email protected]> Cc: <[email protected]> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andi Shyti <[email protected]> Date: Mon Jun 12 00:56:49 2023 +0200 i2c: xiic: Use devm_clk_get_enabled() [ Upstream commit 8390dc7477e49e4acc9e553f385f4ff59d186efe ] Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled(). Signed-off-by: Andi Shyti <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 0c8d604dea43 ("i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled") Signed-off-by: Sasha Levin <[email protected]>
Author: Robert Hancock <[email protected]> Date: Tue Nov 21 18:11:16 2023 +0000 i2c: xiic: Wait for TX empty to avoid missed TX NAKs commit 521da1e9225450bd323db5fa5bca942b1dc485b7 upstream. Frequently an I2C write will be followed by a read, such as a register address write followed by a read of the register value. In this driver, when the TX FIFO half empty interrupt was raised and it was determined that there was enough space in the TX FIFO to send the following read command, it would do so without waiting for the TX FIFO to actually empty. Unfortunately it appears that in some cases this can result in a NAK that was raised by the target device on the write, such as due to an unsupported register address, being ignored and the subsequent read being done anyway. This can potentially put the I2C bus into an invalid state and/or result in invalid read data being processed. To avoid this, once a message has been fully written to the TX FIFO, wait for the TX FIFO empty interrupt before moving on to the next message, to ensure NAKs are handled properly. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <[email protected]> Cc: <[email protected]> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lars-Peter Clausen <[email protected]> Date: Thu Apr 13 19:10:22 2023 -0700 i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path [ Upstream commit d663d93bb47e7ab45602b227701022d8aa16040a ] The xiic_xfer() function gets a runtime PM reference when the function is entered. This reference is released when the function is exited. There is currently one error path where the function exits directly, which leads to a leak of the runtime PM reference. Make sure that this error path also releases the runtime PM reference. Fixes: fdacc3c7405d ("i2c: xiic: Switch from waitqueue to completion") Signed-off-by: Lars-Peter Clausen <[email protected]> Reviewed-by: Michal Simek <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Stable-dep-of: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksandr Mishin <[email protected]> Date: Wed Jul 10 15:39:49 2024 +0300 ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node() [ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ] In ice_sched_add_root_node() and ice_sched_add_node() there are calls to devm_kcalloc() in order to allocate memory for array of pointers to 'ice_sched_node' structure. But incorrect types are used as sizeof() arguments in these calls (structures instead of pointers) which leads to over allocation of memory. Adjust over allocation of memory by correcting types in devm_kcalloc() sizeof() arguments. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Aleksandr Mishin <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jacob Keller <[email protected]> Date: Wed Jul 31 09:55:55 2024 -0700 ice: fix accounting for filters shared by multiple VSIs [ Upstream commit e843cf7b34fe2e0c1afc55e1f3057375c9b77a14 ] When adding a switch filter (such as a MAC or VLAN filter), it is expected that the driver will detect the case where the filter already exists, and return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr, and ice_vsi_add_vlan to avoid incrementing the accounting fields such as vsi->num_vlan or vf->num_mac. This logic works correctly for the case where only a single VSI has added a given switch filter. When a second VSI adds the same switch filter, the driver converts the existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST filter. This saves switch resources, by ensuring that multiple VSIs can re-use the same filter. The ice_add_update_vsi_list() function is responsible for doing this conversion. When first converting a filter from the FWD_TO_VSI into FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the existing rule's VSI. In such a case it returns -EEXIST. However, when the switch rule has already been converted to a FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just requires extending the VSI list entry. The logic for checking if the rule already exists in this case returns 0 instead of -EEXIST. This breaks the accounting logic mentioned above, so the counters for how many MAC and VLAN filters exist for a given VF or VSI no longer accurately reflect the actual count. This breaks other code which relies on these counts. In typical usage this primarily affects such filters generally shared by multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses. Fix this by correctly reporting -EEXIST in the case of adding the same VSI to a switch rule already converted to ICE_FWD_TO_VSI_LIST. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dave Ertman <[email protected]> Date: Wed Sep 18 14:02:56 2024 -0400 ice: fix VLAN replay after reset [ Upstream commit 0eae2c136cb624e4050092feb59f18159b4f2512 ] There is a bug currently when there are more than one VLAN defined and any reset that affects the PF is initiated, after the reset rebuild no traffic will pass on any VLAN but the last one created. This is caused by the iteration though the VLANs during replay each clearing the vsi_map bitmap of the VSI that is being replayed. The problem is that during rhe replay, the pointer to the vsi_map bitmap is used by each successive vlan to determine if it should be replayed on this VSI. The logic was that the replay of the VLAN would replace the bit in the map before the next VLAN would iterate through. But, since the replay copies the old bitmap pointer to filt_replay_rules and creates a new one for the recreated VLANS, it does not do this, and leaves the old bitmap broken to be used to replay the remaining VLANs. Since the old bitmap will be cleaned up in post replay cleanup, there is no need to alter it and break following VLAN replay, so don't clear the bit. Fixes: 334cb0626de1 ("ice: Implement VSI replay framework") Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Dave Ertman <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Mon Sep 9 21:17:40 2024 +0800 ieee802154: Fix build error [ Upstream commit addf89774e48c992316449ffab4f29c2309ebefb ] If REGMAP_SPI is m and IEEE802154_MCR20A is y, mcr20a.c:(.text+0x3ed6c5b): undefined reference to `__devm_regmap_init_spi' ld: mcr20a.c:(.text+0x3ed6cb5): undefined reference to `__devm_regmap_init_spi' Select REGMAP_SPI for IEEE802154_MCR20A to fix it. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Stefan Schmidt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mohamed Khalfella <[email protected]> Date: Tue Sep 24 15:06:01 2024 -0600 igb: Do not bring the device up after non-fatal error [ Upstream commit 330a699ecbfc9c26ec92c6310686da1230b4e7eb ] Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up. Signed-off-by: Mohamed Khalfella <[email protected]> Reviewed-by: Yuanyuan Zhong <[email protected]> Fixes: 004d25060c78 ("igb: Fix igb_down hung on surprise removal") Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Stols <[email protected]> Date: Tue Jul 2 17:34:10 2024 +0000 iio: adc: ad7606: fix oversampling gpio array [ Upstream commit 8dc4594b54dbaaba40dc8884ad3d42083de39434 ] gpiod_set_array_value was misused here: the implementation relied on the assumption that an unsigned long was required for each gpio, while the function expects a bit array stored in "as much unsigned long as needed for storing one bit per GPIO", i.e it is using a bit field. This leaded to incorrect parameter passed to gpiod_set_array_value, that would set 1 value instead of 3. It also prevents to select the software mode correctly for the AD7606B. Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro") Signed-off-by: Guillaume Stols <[email protected]> Reviewed-by: Nuno Sa <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Stols <[email protected]> Date: Tue Jul 2 17:34:11 2024 +0000 iio: adc: ad7606: fix standby gpio state to match the documentation [ Upstream commit 059fe4f8bbdf5cad212e1aeeb3e8968c80b9ff3b ] The binding's documentation specifies that "As the line is active low, it should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled the opposite way. This commit sets the driver's behaviour in sync with the documentation Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API") Signed-off-by: Guillaume Stols <[email protected]> Reviewed-by: Nuno Sa <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Barnabás Czémán <[email protected]> Date: Mon Aug 19 00:29:40 2024 +0200 iio: magnetometer: ak8975: Fix reading for ak099xx sensors commit 129464e86c7445a858b790ac2d28d35f58256bbe upstream. Move ST2 reading with overflow handling after measurement data reading. ST2 register read have to be read after read measurment data, because it means end of the reading and realease the lock on the data. Remove ST2 read skip on interrupt based waiting because ST2 required to be read out at and of the axis read. Fixes: 57e73a423b1e ("iio: ak8975: add ak09911 and ak09912 support") Signed-off-by: Barnabás Czémán <[email protected]> Link: https://patch.msgid.link/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Florian Westphal <[email protected]> Date: Tue Mar 26 11:18:41 2024 +0100 inet: inet_defrag: prevent sk release while still in use commit 18685451fc4e546fc0e718580d32df3c0e5c8272 upstream. ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().") Diagnosed-by: Eric Dumazet <[email protected]> Reported-by: xingwei lee <[email protected]> Reported-by: yue sun <[email protected]> Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Saeed Mirzamohammadi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Nuno Sa <[email protected]> Date: Tue Oct 1 07:47:23 2024 -0700 Input: adp5589-keys - fix adp5589_gpio_get_value() commit c684771630e64bc39bddffeb65dd8a6612a6b249 upstream. The adp5589 seems to have the same behavior as similar devices as explained in commit 910a9f5636f5 ("Input: adp5588-keys - get value from data out when dir is out"). Basically, when the gpio is set as output we need to get the value from ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A. Fixes: 9d2e173644bb ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander") Signed-off-by: Nuno Sa <[email protected]> Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Marek Vasut <[email protected]> Date: Mon Jul 8 23:18:57 2024 +0200 Input: ads7846 - ratelimit the spi_sync error message [ Upstream commit ccbfea78adf75d3d9e87aa739dab83254f5333fa ] In case the touch controller is not connected, this message keeps scrolling on the console indefinitelly. Ratelimit it to avoid filling kernel logs. " ads7846 spi2.1: spi_sync --> -22 " Signed-off-by: Marek Vasut <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Mon Feb 28 22:52:31 2022 -0800 Input: goodix - use the new soc_intel_is_byt() helper commit d176708ffc20332d1c730098d2b111e0b77ece82 upstream. Use the new soc_intel_is_byt() helper from linux/platform_data/x86/soc.h. Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> [Ricardo: Resolved minor cherry-pick conflict. The file linux/regulator/ consumer.h is not #included in the upstream version but it is in v5.10.y. ] Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Werner Sembach <[email protected]> Date: Tue Sep 10 11:40:07 2024 +0200 Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line commit 01eed86d50af9fab27d876fd677b86259ebe9de3 upstream. There might be devices out in the wild where the board name is GMxXGxx instead of GMxXGxX. Adding both to be on the safe side. Signed-off-by: Werner Sembach <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Wed Aug 14 12:06:19 2024 +0200 Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table [ Upstream commit 7ce7c2283fa6843ab3c2adfeb83dcc504a107858 ] Yet another quirk entry for Fujitsu laptop. Lifebook E756 requires i8041.nomux for keeping the touchpad working after suspend/resume. Link: https://bugzilla.suse.com/show_bug.cgi?id=1229056 Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Werner Sembach <[email protected]> Date: Tue Sep 10 11:40:08 2024 +0200 Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table commit 3870e2850b56306d1d1e435c5a1ccbccd7c59291 upstream. The Gen6 devices have the same problem and the same Solution as the Gen5 ones. Some TongFang barebones have touchpad and/or keyboard issues after suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use, no negative effects could be observed when setting all four. Signed-off-by: Werner Sembach <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Werner Sembach <[email protected]> Date: Thu Sep 5 18:48:51 2024 +0200 Input: i8042 - add TUXEDO Stellaris 16 Gen5 AMD to i8042 quirk table commit e06edf96dea065dd1d9df695bf8b92784992333e upstream. Some TongFang barebones have touchpad and/or keyboard issues after suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use, no negative effects could be observed when setting all four. Signed-off-by: Werner Sembach <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jonathan Denose <[email protected]> Date: Tue Jul 23 21:33:30 2024 -0700 Input: synaptics - enable SMBus for HP Elitebook 840 G2 [ Upstream commit da897484557b34a54fabb81f6c223c19a69e546d ] The kernel reports that the touchpad for this device can support a different bus. With SMBus enabled the touchpad movement is smoother and three-finger gestures are recognized. Signed-off-by: Jonathan Denose <[email protected]> Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mathias Krause <[email protected]> Date: Wed Oct 9 05:42:01 2024 +0000 Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal commit fbf8d71742557abaf558d8efb96742d442720cc2 upstream. Calling irq_domain_remove() will lead to freeing the IRQ domain prematurely. The domain is still referenced and will be attempted to get used via rmi_free_function_list() -> rmi_unregister_function() -> irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer. With PaX's MEMORY_SANITIZE this will lead to an access fault when attempting to dereference embedded pointers, as in Torsten's report that was faulting on the 'domain->ops->unmap' test. Fix this by releasing the IRQ domain only after all related IRQs have been deactivated. Fixes: 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") Reported-by: Torsten Hilbrich <[email protected]> Signed-off-by: Mathias Krause <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Tzung-Bi Shih <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Thu Nov 30 15:04:45 2023 +0100 interconnect: qcom: sm8250: Enable sync_state [ Upstream commit bfc7db1cb94ad664546d70212699f8cc6c539e8c ] Add the generic icc sync_state callback to ensure interconnect votes are taken into account, instead of being pegged at maximum values. Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marc Gonzalez <[email protected]> Date: Tue Aug 20 15:27:19 2024 +0200 iommu/arm-smmu-qcom: hide last LPASS SMMU context bank from linux [ Upstream commit 3a8990b8a778219327c5f8ecf10b5d81377b925a ] On qcom msm8998, writing to the last context bank of lpass_q6_smmu (base address 0x05100000) produces a system freeze & reboot. The hardware/hypervisor reports 13 context banks for the LPASS SMMU on msm8998, but only the first 12 are accessible... Override the number of context banks [ 2.546101] arm-smmu 5100000.iommu: probing hardware configuration... [ 2.552439] arm-smmu 5100000.iommu: SMMUv2 with: [ 2.558945] arm-smmu 5100000.iommu: stage 1 translation [ 2.563627] arm-smmu 5100000.iommu: address translation ops [ 2.568923] arm-smmu 5100000.iommu: non-coherent table walk [ 2.574566] arm-smmu 5100000.iommu: (IDR0.CTTW overridden by FW configuration) [ 2.580220] arm-smmu 5100000.iommu: stream matching with 12 register groups [ 2.587263] arm-smmu 5100000.iommu: 13 context banks (0 stage-2 only) [ 2.614447] arm-smmu 5100000.iommu: Supported page sizes: 0x63315000 [ 2.621358] arm-smmu 5100000.iommu: Stage-1: 36-bit VA -> 36-bit IPA [ 2.627772] arm-smmu 5100000.iommu: preserved 0 boot mappings Specifically, the crashes occur here: qsmmu->bypass_cbndx = smmu->num_context_banks - 1; arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0); and here: arm_smmu_write_context_bank(smmu, i); arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT); It is likely that FW reserves the last context bank for its own use, thus a simple work-around is: DON'T USE IT in Linux. If we decrease the number of context banks, last one will be "hidden". Signed-off-by: Marc Gonzalez <[email protected]> Reviewed-by: Caleb Connolly <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lu Baolu <[email protected]> Date: Mon Sep 2 10:27:13 2024 +0800 iommu/vt-d: Always reserve a domain ID for identity setup [ Upstream commit 2c13012e09190174614fd6901857a1b8c199e17d ] We will use a global static identity domain. Reserve a static domain ID for it. Signed-off-by: Lu Baolu <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sanjay K Kumar <[email protected]> Date: Mon Sep 2 10:27:18 2024 +0800 iommu/vt-d: Fix potential lockup if qi_submit_sync called with 0 count [ Upstream commit 3cf74230c139f208b7fb313ae0054386eee31a81 ] If qi_submit_sync() is invoked with 0 invalidation descriptors (for instance, for DMA draining purposes), we can run into a bug where a submitting thread fails to detect the completion of invalidation_wait. Subsequently, this led to a soft lockup. Currently, there is no impact by this bug on the existing users because no callers are submitting invalidations with 0 descriptors. This fix will enable future users (such as DMA drain) calling qi_submit_sync() with 0 count. Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both threads then enter a while loop, waiting for their respective descriptors to complete. T1 detects its completion (i.e., T1's invalidation_wait status changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to reclaim all descriptors, potentially including adjacent ones of other threads that are also marked as QI_DONE. During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU hardware may complete the invalidation for T2, setting its status to QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's invalidation_wait descriptor and changes its status to QI_FREE, T2 will not observe the QI_DONE status for its invalidation_wait and will indefinitely remain stuck. This soft lockup does not occur when only non-zero descriptors are submitted.In such cases, invalidation descriptors are interspersed among wait descriptors with the status QI_IN_USE, acting as barriers. These barriers prevent the reclaim code from mistakenly freeing descriptors belonging to other submitters. Considered the following example timeline: T1 T2 ======================================== ID1 WD1 while(WD1!=QI_DONE) unlock lock WD1=QI_DONE* WD2 while(WD2!=QI_DONE) unlock lock WD1==QI_DONE? ID1=QI_DONE WD2=DONE* reclaim() ID1=FREE WD1=FREE WD2=FREE unlock soft lockup! T2 never sees QI_DONE in WD2 Where: ID = invalidation descriptor WD = wait descriptor * Written by hardware The root of the problem is that the descriptor status QI_DONE flag is used for two conflicting purposes: 1. signal a descriptor is ready for reclaim (to be freed) 2. signal by the hardware that a wait descriptor is complete The solution (in this patch) is state separation by using QI_FREE flag for #1. Once a thread's invalidation descriptors are complete, their status would be set to QI_FREE. The reclaim_free_desc() function would then only free descriptors marked as QI_FREE instead of those marked as QI_DONE. This change ensures that T2 (from the previous example) will correctly observe the completion of its invalidation_wait (marked as QI_DONE). Signed-off-by: Sanjay K Kumar <[email protected]> Signed-off-by: Jacob Pan <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wolfram Sang <[email protected]> Date: Sun Sep 1 11:02:11 2024 +0200 ipmi: docs: don't advertise deprecated sysfs entries [ Upstream commit 64dce81f8c373c681e62d5ffe0397c45a35d48a2 ] "i2c-adapter" class entries are deprecated since 2009. Switch to the proper location. Reported-by: Heiner Kallweit <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Signed-off-by: Wolfram Sang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Fri Aug 9 16:54:02 2024 -0700 ipv4: Check !in_dev earlier for ioctl(SIOCSIFADDR). [ Upstream commit e3af3d3c5b26c33a7950e34e137584f6056c4319 ] dev->ip_ptr could be NULL if we set an invalid MTU. Even then, if we issue ioctl(SIOCSIFADDR) for a new IPv4 address, devinet_ioctl() allocates struct in_ifaddr and fails later in inet_set_ifa() because in_dev is NULL. Let's move the check earlier. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anton Danilov <[email protected]> Date: Wed Sep 25 02:51:59 2024 +0300 ipv4: ip_gre: Fix drops of small packets in ipgre_xmit [ Upstream commit c4a14f6d9d17ad1e41a36182dd3b8a5fd91efbd7 ] Regression Description: Depending on the options specified for the GRE tunnel device, small packets may be dropped. This occurs because the pskb_network_may_pull function fails due to the packet's insufficient length. For example, if only the okey option is specified for the tunnel device, original (before encapsulation) packets smaller than 28 bytes (including the IPv4 header) will be dropped. This happens because the required length is calculated relative to the network header, not the skb->head. Here is how the required length is computed and checked: * The pull_len variable is set to 28 bytes, consisting of: * IPv4 header: 20 bytes * GRE header with Key field: 8 bytes * The pskb_network_may_pull function adds the network offset, shifting the checkable space further to the beginning of the network header and extending it to the beginning of the packet. As a result, the end of the checkable space occurs beyond the actual end of the packet. Instead of ensuring that 28 bytes are present in skb->head, the function is requesting these 28 bytes starting from the network header. For small packets, this requested length exceeds the actual packet size, causing the check to fail and the packets to be dropped. This issue affects both locally originated and forwarded packets in DMVPN-like setups. How to reproduce (for local originated packets): ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \ local <your-ip> remote 0.0.0.0 ip link set mtu 1400 dev gre1 ip link set up dev gre1 ip address add 192.168.13.1/24 dev gre1 ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1 ping -s 1374 -c 10 192.168.13.2 tcpdump -vni gre1 tcpdump -vni <your-ext-iface> 'ip proto 47' ip -s -s -d link show dev gre1 Solution: Use the pskb_may_pull function instead the pskb_network_may_pull. Fixes: 80d875cfc9d3 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()") Signed-off-by: Anton Danilov <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ido Schimmel <[email protected]> Date: Wed Aug 14 15:52:22 2024 +0300 ipv4: Mask upper DSCP bits and ECN bits in NETLINK_FIB_LOOKUP family [ Upstream commit 8fed54758cd248cd311a2b5c1e180abef1866237 ] The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB lookup according to user provided parameters and communicate the result back to user space. However, unlike other users of the FIB lookup API, the upper DSCP bits and the ECN bits of the DS field are not masked, which can result in the wrong result being returned. Solve this by masking the upper DSCP bits and the ECN bits using IPTOS_RT_MASK. The structure that communicates the request and the response is not exported to user space, so it is unlikely that this netlink family is actually in use [1]. [1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/ Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Thu Aug 1 09:38:08 2024 +0800 jbd2: correctly compare tids with tid_geq function in jbd2_fc_begin_commit commit f0e3c14802515f60a47e6ef347ea59c2733402aa upstream. Use tid_geq to compare tids to work over sequence number wraps. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Cc: [email protected] Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baokun Li <[email protected]> Date: Thu Jul 18 19:53:36 2024 +0800 jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error commit f5cacdc6f2bb2a9bf214469dd7112b43dd2dd68a upstream. In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail() to recover some journal space. But if an error occurs while executing jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free space right away, we try other branches, and if j_committing_transaction is NULL (i.e., the tid is 0), we will get the following complain: ============================================ JBD2: I/O error when updating journal superblock for sdd-8. __jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available __jbd2_log_wait_for_space: no way to get more journal space in sdd-8 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0 Modules linked in: CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1 RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0 Call Trace: <TASK> add_transaction_credits+0x5d1/0x5e0 start_this_handle+0x1ef/0x6a0 jbd2__journal_start+0x18b/0x340 ext4_dirty_inode+0x5d/0xb0 __mark_inode_dirty+0xe4/0x5d0 generic_update_time+0x60/0x70 [...] ============================================ So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to clean up at the moment, continue to try to reclaim free space in other ways. Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt when updating journal superblock fails") to make jbd2_cleanup_journal_tail return the correct error code. Fixes: 8c3f25d8950c ("jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space") Cc: [email protected] Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Edward Adam Davis <[email protected]> Date: Sat Aug 24 09:25:23 2024 +0800 jfs: check if leafidx greater than num leaves per dmap tree [ Upstream commit d64ff0d2306713ff084d4b09f84ed1a8c75ecc32 ] syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf. Shaggy: Modified sanity check to apply to control pages as well as leaf pages. Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890 Signed-off-by: Edward Adam Davis <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jeongjun Park <[email protected]> Date: Mon Aug 19 13:05:46 2024 +0900 jfs: fix out-of-bounds in dbNextAG() and diAlloc() [ Upstream commit e63866a475562810500ea7f784099bfe341e761a ] In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds. Reported-by: Jeongjun Park <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jeongjun Park <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Edward Adam Davis <[email protected]> Date: Sat Aug 24 10:50:48 2024 +0800 jfs: Fix uaf in dbFreeBits [ Upstream commit d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ] [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition. Reported-and-tested-by: [email protected] Signed-off-by: Edward Adam Davis <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhao Mengmeng <[email protected]> Date: Wed Sep 4 09:07:58 2024 +0800 jfs: Fix uninit-value access of new_ea in ea_buffer [ Upstream commit 2b59ffad47db1c46af25ccad157bb3b25147c35c ] syzbot reports that lzo1x_1_do_compress is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178 ... Uninit was stored to memory at: ea_put fs/jfs/xattr.c:639 [inline] ... Local variable ea_buf created at: __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934 ===================================================== The reason is ea_buf->new_ea is not initialized properly. Fix this by using memset to empty its content at the beginning in ea_get(). Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=02341e0daa42a15ce130 Signed-off-by: Zhao Mengmeng <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Remington Brasga <[email protected]> Date: Wed Jul 10 00:12:44 2024 +0000 jfs: UBSAN: shift-out-of-bounds in dbFindBits [ Upstream commit b0b2fc815e514221f01384f39fbfbff65d897e1c ] Fix issue with UBSAN throwing shift-out-of-bounds warning. Reported-by: [email protected] Signed-off-by: Remington Brasga <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Olsa <[email protected]> Date: Tue Oct 8 15:29:45 2024 -0700 kallsyms: Make kallsyms_on_each_symbol generally available [ Upstream commit d721def7392a7348ffb9f3583b264239cbd3702c ] Making kallsyms_on_each_symbol generally available, so it can be used outside CONFIG_LIVEPATCH option in following changes. Rather than adding another ifdef option let's make the function generally available (when CONFIG_KALLSYMS option is defined). Cc: Christoph Hellwig <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Stable-dep-of: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by: Sherry Yang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Olsa <[email protected]> Date: Tue Oct 8 15:29:46 2024 -0700 kallsyms: Make module_kallsyms_on_each_symbol generally available commit 73feb8d5fa3b755bb51077c0aabfb6aa556fd498 upstream. Making module_kallsyms_on_each_symbol generally available, so it can be used outside CONFIG_LIVEPATCH option in following changes. Rather than adding another ifdef option let's make the function generally available (when CONFIG_KALLSYMS and CONFIG_MODULES options are defined). Cc: Christoph Hellwig <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 926fe783c8a6 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well") Signed-off-by: Markus Boehme <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 329197033bb0 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well") Signed-off-by: Sherry Yang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Masahiro Yamada <[email protected]> Date: Tue Oct 1 18:02:22 2024 +0900 kconfig: qconf: fix buffer overflow in debug links [ Upstream commit 984ed20ece1c6c20789ece040cbff3eb1a388fa9 ] If you enable "Option -> Show Debug Info" and click a link, the program terminates with the following error: *** buffer overflow detected ***: terminated The buffer overflow is caused by the following line: strcat(data, "$"); The buffer needs one more byte to accommodate the additional character. Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again") Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel Jordan <[email protected]> Date: Wed Sep 4 13:55:30 2024 -0400 ktest.pl: Avoid false positives with grub2 skip regex [ Upstream commit 2351e8c65404aabc433300b6bf90c7a37e8bbc4d ] Some distros have grub2 config files with the lines if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi which match the skip regex defined for grub2 in get_grub_index(): $skip = '^\s*menuentry'; These false positives cause the grub number to be higher than it should be, and the wrong kernel can end up booting. Grub documents the menuentry command with whitespace between it and the title, so make the skip regex reflect this. Link: https://lore.kernel.org/[email protected] Signed-off-by: Daniel Jordan <[email protected]> Acked-by: John 'Warthog9' Hawley (Tenstorrent) <[email protected]> Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Clark <[email protected]> Date: Mon Dec 14 19:03:14 2020 -0800 kthread: add kthread_work tracepoints [ Upstream commit f630c7c6f10546ebff15c3a856e7949feb7a2372 ] While migrating some code from wq to kthread_worker, I found that I missed the execute_start/end tracepoints. So add similar tracepoints for kthread_work. And for completeness, queue_work tracepoint (although this one differs slightly from the matching workqueue tracepoint). Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]> Cc: Rob Clark <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "Peter Zijlstra (Intel)" <[email protected]> Cc: Phil Auld <[email protected]> Cc: Valentin Schneider <[email protected]> Cc: Thara Gopinath <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Vincent Donnefort <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Marcelo Tosatti <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ilias Stamatis <[email protected]> Cc: Liang Chen <[email protected]> Cc: Ben Dooks <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: "J. Bruce Fields" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Stable-dep-of: e16c7b07784f ("kthread: fix task state in kthread worker if being frozen") Signed-off-by: Sasha Levin <[email protected]>
Author: Chen Yu <[email protected]> Date: Tue Aug 27 19:23:08 2024 +0800 kthread: fix task state in kthread worker if being frozen [ Upstream commit e16c7b07784f3fb03025939c4590b9a7c64970a7 ] When analyzing a kernel waring message, Peter pointed out that there is a race condition when the kworker is being frozen and falls into try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a might_sleep() warning in try_to_freeze(). Although the root cause is not related to freeze()[1], it is still worthy to fix this issue ahead. One possible race scenario: CPU 0 CPU 1 ----- ----- // kthread_worker_fn set_current_state(TASK_INTERRUPTIBLE); suspend_freeze_processes() freeze_processes static_branch_inc(&freezer_active); freeze_kernel_threads pm_nosig_freezing = true; if (work) { //false __set_current_state(TASK_RUNNING); } else if (!freezing(current)) //false, been frozen freezing(): if (static_branch_unlikely(&freezer_active)) if (pm_nosig_freezing) return true; schedule() } // state is still TASK_INTERRUPTIBLE try_to_freeze() might_sleep() <--- warning Fix this by explicitly set the TASK_RUNNING before entering try_to_freeze(). Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1] Link: https://lkml.kernel.org/r/[email protected] Fixes: b56c0d8937e6 ("kthread: implement kthread_worker") Signed-off-by: Chen Yu <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Suggested-by: Andrew Morton <[email protected]> Cc: Andreas Gruenbacher <[email protected]> Cc: David Gow <[email protected]> Cc: Mateusz Guzik <[email protected]> Cc: Mickaël Salaün <[email protected]> Cc: Tejun Heo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Thu Oct 17 15:08:39 2024 +0200 Linux 5.10.227 Link: https://lore.kernel.org/r/[email protected] Tested-by: Florian Fainelli <[email protected]> Tested-by: Jon Hunter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhiguo Niu <[email protected]> Date: Thu Jun 20 22:54:34 2024 +0000 lockdep: fix deadlock issue between lockdep and rcu commit a6f88ac32c6e63e69c595bfae220d8641704c9b7 upstream. There is a deadlock scenario between lockdep and rcu when rcu nocb feature is enabled, just as following call stack: rcuop/x -000|queued_spin_lock_slowpath(lock = 0xFFFFFF817F2A8A80, val = ?) -001|queued_spin_lock(inline) // try to hold nocb_gp_lock -001|do_raw_spin_lock(lock = 0xFFFFFF817F2A8A80) -002|__raw_spin_lock_irqsave(inline) -002|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F2A8A80) -003|wake_nocb_gp_defer(inline) -003|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F30B680) -004|__call_rcu_common(inline) -004|call_rcu(head = 0xFFFFFFC082EECC28, func = ?) -005|call_rcu_zapped(inline) -005|free_zapped_rcu(ch = ?)// hold graph lock -006|rcu_do_batch(rdp = 0xFFFFFF817F245680) -007|nocb_cb_wait(inline) -007|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F245680) -008|kthread(_create = 0xFFFFFF80803122C0) -009|ret_from_fork(asm) rcuop/y -000|queued_spin_lock_slowpath(lock = 0xFFFFFFC08291BBC8, val = 0) -001|queued_spin_lock() -001|lockdep_lock() -001|graph_lock() // try to hold graph lock -002|lookup_chain_cache_add() -002|validate_chain() -003|lock_acquire -004|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F211D80) -005|lock_timer_base(inline) -006|mod_timer(inline) -006|wake_nocb_gp_defer(inline)// hold nocb_gp_lock -006|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F2A8680) -007|__call_rcu_common(inline) -007|call_rcu(head = 0xFFFFFFC0822E0B58, func = ?) -008|call_rcu_hurry(inline) -008|rcu_sync_call(inline) -008|rcu_sync_func(rhp = 0xFFFFFFC0822E0B58) -009|rcu_do_batch(rdp = 0xFFFFFF817F266680) -010|nocb_cb_wait(inline) -010|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F266680) -011|kthread(_create = 0xFFFFFF8080363740) -012|ret_from_fork(asm) rcuop/x and rcuop/y are rcu nocb threads with the same nocb gp thread. This patch release the graph lock before lockdep call_rcu. Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use") Cc: [email protected] Cc: Boqun Feng <[email protected]> Cc: Waiman Long <[email protected]> Cc: Carlos Llamas <[email protected]> Cc: Bart Van Assche <[email protected]> Signed-off-by: Zhiguo Niu <[email protected]> Signed-off-by: Xuewen Yan <[email protected]> Reviewed-by: Waiman Long <[email protected]> Reviewed-by: Carlos Llamas <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Carlos Llamas <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Signed-off-by: Boqun Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Finn Thain <[email protected]> Date: Sun Aug 11 10:12:29 2024 +1000 m68k: Fix kernel_clone_args.flags in m68k_clone() [ Upstream commit 09b3d870faa7bc3e96c0978ab3cf4e96e4b15571 ] Stan Johnson recently reported a failure from the 'dump' command: DUMP: Date of this level 0 dump: Fri Aug 9 23:37:15 2024 DUMP: Dumping /dev/sda (an unlisted file system) to /dev/null DUMP: Label: none DUMP: Writing 10 Kilobyte records DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 3595695 blocks. DUMP: Context save fork fails in parent 671 The dump program uses the clone syscall with the CLONE_IO flag, that is, flags == 0x80000000. When that value is promoted from long int to u64 by m68k_clone(), it undergoes sign-extension. The new value includes CLONE_INTO_CGROUP so the validation in cgroup_css_set_fork() fails and the syscall returns -EBADF. Avoid sign-extension by casting to u32. Reported-by: Stan Johnson <[email protected]> Closes: https://lists.debian.org/debian-68k/2024/08/msg00000.html Fixes: 6aabc1facdb2 ("m68k: Implement copy_thread_tls()") Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/3463f1e5d4e95468dc9f3368f2b78ffa7b72199b.1723335149.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Stefan Wahren <[email protected]> Date: Wed Aug 21 23:40:44 2024 +0200 mailbox: bcm2835: Fix timeout during suspend mode [ Upstream commit dc09f007caed3b2f6a3b6bd7e13777557ae22bfd ] During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: https://github.com/raspberrypi/firmware/issues/1894 Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Liao Chen <[email protected]> Date: Wed Aug 14 02:51:47 2024 +0000 mailbox: rockchip: fix a typo in module autoloading [ Upstream commit e92d87c9c5d769e4cb1dd7c90faa38dddd7e52e3 ] MODULE_DEVICE_TABLE(of, rockchip_mbox_of_match) could let the module properly autoloaded based on the alias from of_device_id table. It should be 'rockchip_mbox_of_match' instead of 'rockchp_mbox_of_match', just fix it. Fixes: f70ed3b5dc8b ("mailbox: rockchip: Add Rockchip mailbox driver") Signed-off-by: Liao Chen <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Laurent Pinchart <[email protected]> Date: Wed Jun 19 02:46:16 2024 +0300 media: sun4i_csi: Implement link validate for sun4i_csi subdev commit 2dc5d5d401f5c6cecd97800ffef82e8d17d228f0 upstream. The sun4i_csi driver doesn't implement link validation for the subdev it registers, leaving the link between the subdev and its source unvalidated. Fix it, using the v4l2_subdev_link_validate() helper. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Cc: [email protected] Signed-off-by: Laurent Pinchart <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans Verkuil <[email protected]> Date: Wed Aug 7 09:22:10 2024 +0200 media: uapi/linux/cec.h: cec_msg_set_reply_to: zero flags commit 599f6899051cb70c4e0aa9fd591b9ee220cb6f14 upstream. The cec_msg_set_reply_to() helper function never zeroed the struct cec_msg flags field, this can cause unexpected behavior if flags was uninitialized to begin with. Signed-off-by: Hans Verkuil <[email protected]> Fixes: 0dbacebede1e ("[media] cec: move the CEC framework out of staging and to media") Cc: <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Benjamin Gaignard <[email protected]> Date: Sat Mar 2 11:37:08 2024 +0100 media: usbtv: Remove useless locks in usbtv_video_free() [ Upstream commit 65e6a2773d655172143cc0b927cdc89549842895 ] Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. Fixes: c838530d230b ("media: media videobuf2: Be more flexible on the number of queue stored buffers") Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Signed-off-by: Benjamin Gaignard <[email protected]> Reviewed-by: Tomasz Figa <[email protected]> Tested-by: Hans Verkuil <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [hverkuil: fix minor spelling mistake in log message] Signed-off-by: Sasha Levin <[email protected]>
Author: Zheng Wang <[email protected]> Date: Tue Jun 18 14:55:59 2024 +0530 media: venus: fix use after free bug in venus_remove due to race condition commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream. in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. Cc: [email protected] Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Zheng Wang <[email protected]> Signed-off-by: Dikshita Agarwal <[email protected]> Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yunke Cao <[email protected]> Date: Wed Aug 14 11:06:40 2024 +0900 media: videobuf2-core: clear memory related fields in __vb2_plane_dmabuf_put() [ Upstream commit 6a9c97ab6b7e85697e0b74e86062192a5ffffd99 ] Clear vb2_plane's memory related fields in __vb2_plane_dmabuf_put(), including bytesused, length, fd and data_offset. Remove the duplicated code in __prepare_dmabuf(). Signed-off-by: Yunke Cao <[email protected]> Acked-by: Tomasz Figa <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mike Rapoport <[email protected]> Date: Mon Jul 29 08:33:27 2024 +0300 microblaze: don't treat zero reserved memory regions as error [ Upstream commit 0075df288dd8a7abfe03b3766176c393063591dd ] Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the check for non-zero of memblock.reserved.cnt in mmu_init() would always be true either because memblock.reserved.cnt is initialized to 1 or because there were memory reservations earlier. The removal of dummy empty entry in memblock caused this check to fail because now memblock.reserved.cnt is initialized to 0. Remove the check for non-zero of memblock.reserved.cnt because it's perfectly fine to have an empty memblock.reserved array that early in boot. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Reviewed-by: Wei Yang <[email protected]> Tested-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lorenzo Stoakes <[email protected]> Date: Wed Sep 11 18:51:11 2024 +0100 minmax: reduce min/max macro expansion in atomisp driver commit 7c6a3a65ace70f12b27b1a27c9a69cb791dc6e91 upstream. Avoid unnecessary nested min()/max() which results in egregious macro expansion. Use clamp_t() as this introduces the least possible expansion, and turn the {s,u}DIGIT_FITTING() macros into inline functions to avoid the nested expansion. This resolves an issue with slackware 15.0 32-bit compilation as reported by Richard Narron. Presumably the min/max fixups would be difficult to backport, this patch should be easier and fix's Richard's problem in 5.15. Reported-by: Richard Narron <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants") Cc: [email protected] Signed-off-by: Lorenzo Stoakes <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Danilo Krummrich <[email protected]> Date: Tue Aug 13 00:34:34 2024 +0200 mm: krealloc: consider spare memory for __GFP_ZERO commit 1a83a716ec233990e1fd5b6fbb1200ade63bf450 upstream. As long as krealloc() is called with __GFP_ZERO consistently, starting with the initial memory allocation, __GFP_ZERO should be fully honored. However, if for an existing allocation krealloc() is called with a decreased size, it is not ensured that the spare portion the allocation is zeroed. Thus, if krealloc() is subsequently called with a larger size again, __GFP_ZERO can't be fully honored, since we don't know the previous size, but only the bucket size. Example: buf = kzalloc(64, GFP_KERNEL); memset(buf, 0xff, 64); buf = krealloc(buf, 48, GFP_KERNEL | __GFP_ZERO); /* After this call the last 16 bytes are still 0xff. */ buf = krealloc(buf, 64, GFP_KERNEL | __GFP_ZERO); Fix this, by explicitly setting spare memory to zero, when shrinking an allocation with __GFP_ZERO flag set or init_on_alloc enabled. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Danilo Krummrich <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Acked-by: David Rientjes <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Hyeonggon Yoo <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: David Gow <[email protected]> Date: Sat Aug 3 15:46:41 2024 +0800 mm: only enforce minimum stack gap size if it's sensible commit 69b50d4351ed924f29e3d46b159e28f70dfc707f upstream. The generic mmap_base code tries to leave a gap between the top of the stack and the mmap base address, but enforces a minimum gap size (MIN_GAP) of 128MB, which is too large on some setups. In particular, on arm tasks without ADDR_LIMIT_32BIT, the STACK_TOP value is less than 128MB, so it's impossible to fit such a gap in. Only enforce this minimum if MIN_GAP < MAX_GAP, as we'd prefer to honour MAX_GAP, which is defined proportionally, so scales better and always leaves us with both _some_ stack space and some room for mmap. This fixes the usercopy KUnit test suite on 32-bit arm, as it doesn't set any personality flags so gets the default (in this case 26-bit) task size. This test can be run with: ./tools/testing/kunit/kunit.py run --arch arm usercopy --make_options LLVM=1 Link: https://lkml.kernel.org/r/[email protected] Fixes: dba79c3df4a2 ("arm: use generic mmap top-down layout and brk randomization") Signed-off-by: David Gow <[email protected]> Reviewed-by: Kees Cook <[email protected]> Cc: Alexandre Ghiti <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Russell King <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Olaf Hering <[email protected]> Date: Tue Jul 30 10:58:13 2024 +0200 mount: handle OOM on mnt_warn_timestamp_expiry [ Upstream commit 4bcda1eaf184e308f07f9c61d3a535f9ce477ce8 ] If no page could be allocated, an error pointer was used as format string in pr_warn. Rearrange the code to return early in case of OOM. Also add a check for the return value of d_path. Fixes: f8b92ba67c5d ("mount: Add mount warning for impending timestamp expiry") Signed-off-by: Olaf Hering <[email protected]> Link: https://lore.kernel.org/r/[email protected] [brauner: rewrite commit and commit message] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anthony Iliopoulos <[email protected]> Date: Tue Mar 22 14:39:22 2022 -0700 mount: warn only once about timestamp range expiration [ Upstream commit a128b054ce029554a4a52fc3abb8c1df8bafcaef ] Commit f8b92ba67c5d ("mount: Add mount warning for impending timestamp expiry") introduced a mount warning regarding filesystem timestamp limits, that is printed upon each writable mount or remount. This can result in a lot of unnecessary messages in the kernel log in setups where filesystems are being frequently remounted (or mounted multiple times). Avoid this by setting a superblock flag which indicates that the warning has been emitted at least once for any particular mount, as suggested in [1]. Link: https://lore.kernel.org/CAHk-=wim6VGnxQmjfK_tDg6fbHYKL4EFkmnTjVr9QnRqjDBAeA@mail.gmail.com/ [1] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Anthony Iliopoulos <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Christian Brauner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Deepa Dinamani <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Stable-dep-of: 4bcda1eaf184 ("mount: handle OOM on mnt_warn_timestamp_expiry") Signed-off-by: Sasha Levin <[email protected]>
Author: Geliang Tang <[email protected]> Date: Tue Sep 17 09:26:09 2024 +0200 mptcp: export lookup_anno_list_by_saddr commit d88c476f4a7dd69a2588470f6c4f8b663efa16c6 upstream. This patch exported the static function lookup_anno_list_by_saddr, and renamed it to mptcp_lookup_anno_list_by_saddr. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: b4cd80b03389 ("mptcp: pm: Fix uaf in __timer_delete_sync") Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Matthieu Baerts (NGI0) <[email protected]> Date: Mon Sep 30 18:23:46 2024 +0200 mptcp: fix sometimes-uninitialized warning Nathan reported this issue: $ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 LLVM_IAS=1 mrproper allmodconfig net/mptcp/subflow.o net/mptcp/subflow.c:877:6: warning: variable 'incr' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 877 | if (WARN_ON_ONCE(offset > skb->len)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/bug.h:101:33: note: expanded from macro 'WARN_ON_ONCE' 101 | #define WARN_ON_ONCE(condition) ({ \ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 102 | int __ret_warn_on = !!(condition); \ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 103 | if (unlikely(__ret_warn_on)) \ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 104 | __WARN_FLAGS(BUGFLAG_ONCE | \ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 105 | BUGFLAG_TAINT(TAINT_WARN)); \ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 106 | unlikely(__ret_warn_on); \ | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 107 | }) | ~~ net/mptcp/subflow.c:893:6: note: uninitialized use occurs here 893 | if (incr) | ^~~~ net/mptcp/subflow.c:877:2: note: remove the 'if' if its condition is always false 877 | if (WARN_ON_ONCE(offset > skb->len)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 878 | goto out; | ~~~~~~~~ net/mptcp/subflow.c:874:18: note: initialize the variable 'incr' to silence this warning 874 | u32 offset, incr, avail_len; | ^ | = 0 1 warning generated. As mentioned by Nathan, this issue is present because 5.10 does not include commit ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling"), which removed the use of 'incr' in the error path added by this change. This other commit does not really look suitable for stable, hence this dedicated patch for 5.10. Fixes: e93fa44f0714 ("mptcp: fix duplicate data handling") Reported-by: Nathan Chancellor <[email protected]> Closes: https://lore.kernel.org/20240928175524.GA1713144@thelio-3990X Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Edward Adam Davis <[email protected]> Date: Tue Sep 17 09:26:11 2024 +0200 mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: [email protected] Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Edward Adam Davis <[email protected]> Acked-by: Paolo Abeni <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> (cherry picked from commit b4cd80b0338945a94972ac3ed54f8338d2da2076) Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Davide Caratti <[email protected]> Date: Tue Sep 17 09:26:10 2024 +0200 mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer commit d58300c3185b78ab910092488126b97f0abe3ae2 upstream. when Linux receives an echo-ed ADD_ADDR, it checks the IP address against the list of "announced" addresses. In case of a positive match, the timer that handles retransmissions is stopped regardless of the 'Address Id' in the received packet: this behaviour does not comply with RFC8684 3.4.1. Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs. Tested using packetdrill, with the following captured output: unpatched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0 ^^^ retransmission is stopped here, but 'Address Id' is 90 patched kernel: Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0 In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0 ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: b4cd80b03389 ("mptcp: pm: Fix uaf in __timer_delete_sync") [ Conflicts in options.c, because some features are missing in this version, e.g. commit 557963c383e8 ("mptcp: move to next addr when subflow creation fail") and commit f7dafee18538 ("mptcp: use mptcp_addr_info in mptcp_options_received"). ] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Charles Han <[email protected]> Date: Wed Aug 28 17:24:27 2024 +0800 mtd: powernv: Add check devm_kasprintf() returned value [ Upstream commit 395999829880a106bb95f0ce34e6e4c2b43c6a5d ] devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name") Signed-off-by: Charles Han <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Mirsad Todorovac <[email protected]> Date: Fri Jul 12 01:43:20 2024 +0200 mtd: slram: insert break after errors in parsing the map [ Upstream commit 336c218dd7f0588ed8a7345f367975a00a4f003f ] GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution path in which, due to lazy evaluation, devlength isn't initialised with the parsed string: 289 while (map) { 290 devname = devstart = devlength = NULL; 291 292 if (!(devname = strsep(&map, ","))) { 293 E("slram: No devicename specified.\n"); 294 break; 295 } 296 T("slram: devname = %s\n", devname); 297 if ((!map) || (!(devstart = strsep(&map, ",")))) { 298 E("slram: No devicestart specified.\n"); 299 } 300 T("slram: devstart = %s\n", devstart); → 301 if ((!map) || (!(devlength = strsep(&map, ",")))) { 302 E("slram: No devicelength / -end specified.\n"); 303 } → 304 T("slram: devlength = %s\n", devlength); 305 if (parse_cmdline(devname, devstart, devlength) != 0) { 306 return(-EINVAL); 307 } Parsing should be finished after map == NULL, so a break is best inserted after each E("slram: ... \n") error message. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Miquel Raynal <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Vignesh Raghavendra <[email protected]> Cc: [email protected] Signed-off-by: Mirsad Todorovac <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Mohamed Khalfella <[email protected]> Date: Wed Sep 4 22:02:48 2024 -0600 net/mlx5: Added cond_resched() to crdump collection [ Upstream commit ec793155894140df7421d25903de2e6bc12c695b ] Collecting crdump involves reading vsc registers from pci config space of mlx device, which can take long time to complete. This might result in starving other threads waiting to run on the cpu. Numbers I got from testing ConnectX-5 Ex MCX516A-CDAT in the lab: - mlx5_vsc_gw_read_block_fast() was called with length = 1310716. - mlx5_vsc_gw_read_fast() reads 4 bytes at a time. It was not used to read the entire 1310716 bytes. It was called 53813 times because there are jumps in read_addr. - On average mlx5_vsc_gw_read_fast() took 35284.4ns. - In total mlx5_vsc_wait_on_flag() called vsc_read() 54707 times. The average time for each call was 17548.3ns. In some instances vsc_read() was called more than one time when the flag was not set. As expected the thread released the cpu after 16 iterations in mlx5_vsc_wait_on_flag(). - Total time to read crdump was 35284.4ns * 53813 ~= 1.898s. It was seen in the field that crdump can take more than 5 seconds to complete. During that time mlx5_vsc_wait_on_flag() did not release the cpu because it did not complete 16 iterations. It is believed that pci config reads were slow. Adding cond_resched() every 128 register read improves the situation. In the common case the, crdump takes ~1.8989s, the thread yields the cpu every ~4.51ms. If crdump takes ~5s, the thread yields the cpu every ~18.0ms. Fixes: 8b9d8baae1de ("net/mlx5: Add Crdump support") Reviewed-by: Yuanyuan Zhong <[email protected]> Signed-off-by: Mohamed Khalfella <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gerd Bayer <[email protected]> Date: Tue Sep 10 10:53:51 2024 +0200 net/mlx5: Fix error path in multi-packet WQE transmit [ Upstream commit 2bcae12c795f32ddfbf8c80d1b5f1d3286341c32 ] Remove the erroneous unmap in case no DMA mapping was established The multi-packet WQE transmit code attempts to obtain a DMA mapping for the skb. This could fail, e.g. under memory pressure, when the IOMMU driver just can't allocate more memory for page tables. While the code tries to handle this in the path below the err_unmap label it erroneously unmaps one entry from the sq's FIFO list of active mappings. Since the current map attempt failed this unmap is removing some random DMA mapping that might still be required. If the PCI function now presents that IOVA, the IOMMU may assumes a rogue DMA access and e.g. on s390 puts the PCI function in error state. The erroneous behavior was seen in a stress-test environment that created memory pressure. Fixes: 5af75c747e2a ("net/mlx5e: Enhanced TX MPWQE for SKBs") Signed-off-by: Gerd Bayer <[email protected]> Reviewed-by: Zhu Yanjun <[email protected]> Acked-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Meir Lichtinger <[email protected]> Date: Fri Nov 20 15:03:30 2020 -0800 net/mlx5: Update the list of the PCI supported devices [ Upstream commit dd8595eabeb486d41ad9994e6cece36e0e25e313 ] Add the upcoming BlueField-3 device ID. Signed-off-by: Meir Lichtinger <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shahar Shitrit <[email protected]> Date: Sun Aug 11 13:56:13 2024 +0300 net/mlx5e: Add missing link modes to ptys2ethtool_map [ Upstream commit 7617d62cba4a8a3ff3ed3fda0171c43f135c142e ] Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy modes in ptys2legacy_ethtool_table, since they were missing. Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API") Signed-off-by: Shahar Shitrit <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Carolina Jubran <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Mon Oct 7 18:41:30 2024 +0000 net/sched: accept TCA_STAB only for root qdisc [ Upstream commit 3cb7cf1540ddff5473d6baeb530228d19bc97b8a ] Most qdiscs maintain their backlog using qdisc_pkt_len(skb) on the assumption it is invariant between the enqueue() and dequeue() handlers. Unfortunately syzbot can crash a host rather easily using a TBF + SFQ combination, with an STAB on SFQ [1] We can't support TCA_STAB on arbitrary level, this would require to maintain per-qdisc storage. [1] [ 88.796496] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 88.798611] #PF: supervisor read access in kernel mode [ 88.799014] #PF: error_code(0x0000) - not-present page [ 88.799506] PGD 0 P4D 0 [ 88.799829] Oops: Oops: 0000 [#1] SMP NOPTI [ 88.800569] CPU: 14 UID: 0 PID: 2053 Comm: b371744477 Not tainted 6.12.0-rc1-virtme #1117 [ 88.801107] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 88.801779] RIP: 0010:sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.802544] Code: 0f b7 50 12 48 8d 04 d5 00 00 00 00 48 89 d6 48 29 d0 48 8b 91 c0 01 00 00 48 c1 e0 03 48 01 c2 66 83 7a 1a 00 7e c0 48 8b 3a <4c> 8b 07 4c 89 02 49 89 50 08 48 c7 47 08 00 00 00 00 48 c7 07 00 All code ======== 0: 0f b7 50 12 movzwl 0x12(%rax),%edx 4: 48 8d 04 d5 00 00 00 lea 0x0(,%rdx,8),%rax b: 00 c: 48 89 d6 mov %rdx,%rsi f: 48 29 d0 sub %rdx,%rax 12: 48 8b 91 c0 01 00 00 mov 0x1c0(%rcx),%rdx 19: 48 c1 e0 03 shl $0x3,%rax 1d: 48 01 c2 add %rax,%rdx 20: 66 83 7a 1a 00 cmpw $0x0,0x1a(%rdx) 25: 7e c0 jle 0xffffffffffffffe7 27: 48 8b 3a mov (%rdx),%rdi 2a:* 4c 8b 07 mov (%rdi),%r8 <-- trapping instruction 2d: 4c 89 02 mov %r8,(%rdx) 30: 49 89 50 08 mov %rdx,0x8(%r8) 34: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 3b: 00 3c: 48 rex.W 3d: c7 .byte 0xc7 3e: 07 (bad) ... Code starting with the faulting instruction =========================================== 0: 4c 8b 07 mov (%rdi),%r8 3: 4c 89 02 mov %r8,(%rdx) 6: 49 89 50 08 mov %rdx,0x8(%r8) a: 48 c7 47 08 00 00 00 movq $0x0,0x8(%rdi) 11: 00 12: 48 rex.W 13: c7 .byte 0xc7 14: 07 (bad) ... [ 88.803721] RSP: 0018:ffff9a1f892b7d58 EFLAGS: 00000206 [ 88.804032] RAX: 0000000000000000 RBX: ffff9a1f8420c800 RCX: ffff9a1f8420c800 [ 88.804560] RDX: ffff9a1f81bc1440 RSI: 0000000000000000 RDI: 0000000000000000 [ 88.805056] RBP: ffffffffc04bb0e0 R08: 0000000000000001 R09: 00000000ff7f9a1f [ 88.805473] R10: 000000000001001b R11: 0000000000009a1f R12: 0000000000000140 [ 88.806194] R13: 0000000000000001 R14: ffff9a1f886df400 R15: ffff9a1f886df4ac [ 88.806734] FS: 00007f445601a740(0000) GS:ffff9a2e7fd80000(0000) knlGS:0000000000000000 [ 88.807225] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.807672] CR2: 0000000000000000 CR3: 000000050cc46000 CR4: 00000000000006f0 [ 88.808165] Call Trace: [ 88.808459] <TASK> [ 88.808710] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 88.809261] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 88.809561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 88.809806] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 88.810074] ? sfq_dequeue (net/sched/sch_sfq.c:272 net/sched/sch_sfq.c:499) sch_sfq [ 88.810411] sfq_reset (net/sched/sch_sfq.c:525) sch_sfq [ 88.810671] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.810950] tbf_reset (./include/linux/timekeeping.h:169 net/sched/sch_tbf.c:334) sch_tbf [ 88.811208] qdisc_reset (./include/linux/skbuff.h:2135 ./include/linux/skbuff.h:2441 ./include/linux/skbuff.h:3304 ./include/linux/skbuff.h:3310 net/sched/sch_generic.c:1036) [ 88.811484] netif_set_real_num_tx_queues (./include/linux/spinlock.h:396 ./include/net/sch_generic.h:768 net/core/dev.c:2958) [ 88.811870] __tun_detach (drivers/net/tun.c:590 drivers/net/tun.c:673) [ 88.812271] tun_chr_close (drivers/net/tun.c:702 drivers/net/tun.c:3517) [ 88.812505] __fput (fs/file_table.c:432 (discriminator 1)) [ 88.812735] task_work_run (kernel/task_work.c:230) [ 88.813016] do_exit (kernel/exit.c:940) [ 88.813372] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 88.813639] ? handle_mm_fault (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/memcontrol.h:1022 ./include/linux/memcontrol.h:1045 ./include/linux/memcontrol.h:1052 mm/memory.c:5928 mm/memory.c:6088) [ 88.813867] do_group_exit (kernel/exit.c:1070) [ 88.814138] __x64_sys_exit_group (kernel/exit.c:1099) [ 88.814490] x64_sys_call (??:?) [ 88.814791] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 88.815012] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 88.815495] RIP: 0033:0x7f44560f1975 Fixes: 175f9c1bba9b ("net_sched: Add size table for qdiscs") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Daniel Borkmann <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jeongjun Park <[email protected]> Date: Fri Aug 23 03:11:09 2024 +0900 net/xen-netback: prevent UAF in xenvif_flush_hash() [ Upstream commit 0fa5e94a1811d68fbffa0725efe6d4ca62c03d12 ] During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe. Signed-off-by: Jeongjun Park <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Ahern <[email protected]> Date: Mon Mar 14 14:45:51 2022 -0600 net: Add l3mdev index to flow struct and avoid oif reset for port devices [ Upstream commit 40867d74c374b235e14d839f3a77f26684feefe5 ] The fundamental premise of VRF and l3mdev core code is binding a socket to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope. Legacy code resets flowi_oif to the l3mdev losing any original port device binding. Ben (among others) has demonstrated use cases where the original port device binding is important and needs to be retained. This patch handles that by adding a new entry to the common flow struct that can indicate the l3mdev index for later rule and table matching avoiding the need to reset flowi_oif. In addition to allowing more use cases that require port device binds, this patch brings a few datapath simplications: 1. l3mdev_fib_rule_match is only called when walking fib rules and always after l3mdev_update_flow. That allows an optimization to bail early for non-VRF type uses cases when flowi_l3mdev is not set. Also, only that index needs to be checked for the FIB table id. 2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev (e.g., VRF) device. By resetting flowi_oif only for this case the FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed, removing several checks in the datapath. The flowi_iif path can be simplified to only be called if the it is not loopback (loopback can not be assigned to an L3 domain) and the l3mdev index is not already set. 3. Avoid another device lookup in the output path when the fib lookup returns a reject failure. Note: 2 functional tests for local traffic with reject fib rules are updated to reflect the new direct failure at FIB lookup time for ping rather than the failure on packet path. The current code fails like this: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: Warning: source address might be selected on device other than: eth1 PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data. --- 172.16.3.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms where the test now directly fails: HINT: Fails since address on vrf device is out of device scope COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1 ping: connect: No route to host Signed-off-by: David Ahern <[email protected]> Tested-by: Ben Greear <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups") Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Sep 24 15:02:57 2024 +0000 net: add more sanity checks to qdisc_pkt_len_init() [ Upstream commit ab9a9a9e9647392a19e7a885b08000e89c86b535 ] One path takes care of SKB_GSO_DODGY, assuming skb->len is bigger than hdr_len. virtio_net_hdr_to_skb() does not fully dissect TCP headers, it only make sure it is at least 20 bytes. It is possible for an user to provide a malicious 'GSO' packet, total length of 80 bytes. - 20 bytes of IPv4 header - 60 bytes TCP header - a small gso_size like 8 virtio_net_hdr_to_skb() would declare this packet as a normal GSO packet, because it would see 40 bytes of payload, bigger than gso_size. We need to make detect this case to not underflow qdisc_skb_cb(skb)->pkt_len. Fixes: 1def9238d4aa ("net_sched: more precise pkt_len computation") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Simon Horman <[email protected]> Date: Wed Aug 21 16:58:57 2024 +0100 net: atlantic: Avoid warning about potential string truncation [ Upstream commit 5874e0c9f25661c2faefe4809907166defae3d7f ] W=1 builds with GCC 14.2.0 warn that: .../aq_ethtool.c:278:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] 278 | snprintf(tc_string, 8, "TC%d ", tc); | ^~ .../aq_ethtool.c:278:56: note: directive argument in the range [-2147483641, 254] 278 | snprintf(tc_string, 8, "TC%d ", tc); | ^~~~~~~ .../aq_ethtool.c:278:33: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8 278 | snprintf(tc_string, 8, "TC%d ", tc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tc is always in the range 0 - cfg->tcs. And as cfg->tcs is a u8, the range is 0 - 255. Further, on inspecting the code, it seems that cfg->tcs will never be more than AQ_CFG_TCS_MAX (8), so the range is actually 0 - 8. So, it seems that the condition that GCC flags will not occur. But, nonetheless, it would be nice if it didn't emit the warning. It seems that this can be achieved by changing the format specifier from %d to %u, in which case I believe GCC recognises an upper bound on the range of tc of 0 - 255. After some experimentation I think this is due to the combination of the use of %u and the type of cfg->tcs (u8). Empirically, updating the type of the tc variable to unsigned int has the same effect. As both of these changes seem to make sense in relation to what the code is actually doing - iterating over unsigned values - do both. Compile tested only. Signed-off-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Sep 24 15:02:56 2024 +0000 net: avoid potential underflow in qdisc_pkt_len_init() with UFO [ Upstream commit c20029db28399ecc50e556964eaba75c43b1e2f1 ] After commit 7c6d2ecbda83 ("net: be more gentle about silly gso requests coming from user") virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space to cook a bad GSO packet. Then commit cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") while fixing one issue, allowed user space to cook a GSO packet with the following characteristic : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 : gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD 107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm: b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00 eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49 All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp) b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx 22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34 mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11 mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561] RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09: ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [ 70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS: 000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.724561] CR2: 0000000000000000 CR3: 000000010c568000 CR4: 00000000000006f0 [ 70.724561] Call Trace: [ 70.724561] <TASK> [ 70.724561] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 70.724561] ? page_fault_oops (arch/x86/mm/fault.c:715) [ 70.724561] ? exc_page_fault (./arch/x86/include/asm/irqflags.h:26 ./arch/x86/include/asm/irqflags.h:87 ./arch/x86/include/asm/irqflags.h:147 arch/x86/mm/fault.c:1489 arch/x86/mm/fault.c:1539) [ 70.724561] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) [ 70.724561] ? fq_codel_enqueue (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [ 70.724561] dev_qdisc_enqueue (net/core/dev.c:3784) [ 70.724561] __dev_queue_xmit (net/core/dev.c:3880 (discriminator 2) net/core/dev.c:4390 (discriminator 2)) [ 70.724561] ? irqentry_enter (kernel/entry/common.c:237) [ 70.724561] ? sysvec_apic_timer_interrupt (./arch/x86/include/asm/hardirq.h:74 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2) arch/x86/kernel/apic/apic.c:1043 (discriminator 2)) [ 70.724561] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:58 (discriminator 4)) [ 70.724561] ? asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) [ 70.724561] ? virtio_net_hdr_to_skb.constprop.0 (./include/linux/virtio_net.h:129 (discriminator 1)) [ 70.724561] packet_sendmsg (net/packet/af_packet.c:3145 (discriminator 1) net/packet/af_packet.c:3177 (discriminator 1)) [ 70.724561] ? _raw_spin_lock_bh (./arch/x86/include/asm/atomic.h:107 (discriminator 4) ./include/linux/atomic/atomic-arch-fallback.h:2170 (discriminator 4) ./include/linux/atomic/atomic-instrumented.h:1302 (discriminator 4) ./include/asm-generic/qspinlock.h:111 (discriminator 4) ./include/linux/spinlock.h:187 (discriminator 4) ./include/linux/spinlock_api_smp.h:127 (discriminator 4) kernel/locking/spinlock.c:178 (discriminator 4)) [ 70.724561] ? netdev_name_node_lookup_rcu (net/core/dev.c:325 (discriminator 1)) [ 70.724561] __sys_sendto (net/socket.c:730 (discriminator 1) net/socket.c:745 (discriminator 1) net/socket.c:2210 (discriminator 1)) [ 70.724561] ? __sys_setsockopt (./include/linux/file.h:34 net/socket.c:2355) [ 70.724561] __x64_sys_sendto (net/socket.c:2222 (discriminator 1) net/socket.c:2218 (discriminator 1) net/socket.c:2218 (discriminator 1)) [ 70.724561] do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) [ 70.724561] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) [ 70.724561] RIP: 0033:0x41ae09 Fixes: cf9acc90c80ec ("net: virtio_net_hdr_to_skb: count transport header in UFO") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Jonathan Davies <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: Jonathan Davies <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sean Anderson <[email protected]> Date: Tue Sep 10 10:31:44 2024 -0400 net: dpaa: Pad packets to ETH_ZLEN [ Upstream commit cbd7ec083413c6a2e0c326d49e24ec7d12c7a9e0 ] When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Gorski <[email protected]> Date: Fri Oct 4 10:47:20 2024 +0200 net: dsa: b53: allow lower MTUs on BCM5325/5365 [ Upstream commit e4b294f88a32438baf31762441f3dd1c996778be ] While BCM5325/5365 do not support jumbo frames, they do support slightly oversized frames, so do not error out if requesting a supported MTU for them. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Gorski <[email protected]> Date: Fri Oct 4 10:47:17 2024 +0200 net: dsa: b53: fix jumbo frame mtu check [ Upstream commit 42fb3acf6826c6764ba79feb6e15229b43fd2f9f ] JMS_MIN_SIZE is the full ethernet frame length, while mtu is just the data payload size. Comparing these two meant that mtus between 1500 and 1518 did not trigger enabling jumbo frames. So instead compare the set mtu ETH_DATA_LEN, which is equal to JMS_MIN_SIZE - ETH_HLEN - ETH_FCS_LEN; Also do a check that the requested mtu is actually greater than the minimum length, else we do not need to enable jumbo frames. In practice this only introduced a very small range of mtus that did not work properly. Newer chips allow 2000 byte large frames by default, and older chips allow 1536 bytes long, which is equivalent to an mtu of 1514. So effectivly only mtus of 1515~1517 were broken. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Gorski <[email protected]> Date: Fri Oct 4 10:47:21 2024 +0200 net: dsa: b53: fix jumbo frames on 10/100 ports [ Upstream commit 2f3dcd0d39affe5b9ba1c351ce0e270c8bdd5109 ] All modern chips support and need the 10_100 bit set for supporting jumbo frames on 10/100 ports, so instead of enabling it only for 583XX enable it for everything except bcm63xx, where the bit is writeable, but does nothing. Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds without the bit set. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Gorski <[email protected]> Date: Fri Oct 4 10:47:18 2024 +0200 net: dsa: b53: fix max MTU for 1g switches [ Upstream commit 680a8217dc00dc7e7da57888b3c053289b60eb2b ] JMS_MAX_SIZE is the ethernet frame length, not the MTU, which is payload without ethernet headers. According to the datasheets maximum supported frame length for most gigabyte swithes is 9720 bytes, so convert that to the expected MTU when using VLAN tagged frames. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Gorski <[email protected]> Date: Fri Oct 4 10:47:19 2024 +0200 net: dsa: b53: fix max MTU for BCM5325/BCM5365 [ Upstream commit ca8c1f71c10193c270f772d70d34b15ad765d6a8 ] BCM5325/BCM5365 do not support jumbo frames, so we should not report a jumbo frame mtu for them. But they do support so called "oversized" frames up to 1536 bytes long by default, so report an appropriate MTU. Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support") Signed-off-by: Jonas Gorski <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anatolij Gustschin <[email protected]> Date: Fri Oct 4 13:36:54 2024 +0200 net: dsa: lan9303: ensure chip reset and wait for READY status commit 5c14e51d2d7df49fe0d4e64a12c58d2542f452ff upstream. Accessing device registers seems to be not reliable, the chip revision is sometimes detected wrongly (0 instead of expected 1). Ensure that the chip reset is performed via reset GPIO and then wait for 'Device Ready' status in HW_CFG register before doing any register initializations. Cc: [email protected] Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Anatolij Gustschin <[email protected]> [alex: reworked using read_poll_timeout()] Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Thu Oct 17 12:06:51 2024 +0200 net: dsa: microchip: fix build warning In commit 65a9383389db ("net: dsa: microchip: fix initial port flush problem"), the build warning of an unused variable showed up. Fix this by removing the variable entirely. Fixes: 65a9383389db ("net: dsa: microchip: fix initial port flush problem") Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Wed Sep 11 17:44:44 2024 +0800 net: enetc: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit 799a9225997799f7b1b579bc50a93b78b4fb2a01 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bbb96dc7fa1a ("enetc: Factor out the traffic start/stop procedures") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Linus Walleij <[email protected]> Date: Sat Jan 6 01:12:22 2024 +0100 net: ethernet: cortina: Drop TSO support [ Upstream commit ac631873c9e7a50d2a8de457cfc4b9f86666403e ] The recent change to allow large frames without hardware checksumming slotted in software checksumming in the driver if hardware could not do it. This will however upset TSO (TCP Segment Offloading). Typical error dumps includes this: skb len=2961 headroom=222 headlen=66 tailroom=0 (...) WARNING: CPU: 0 PID: 956 at net/core/dev.c:3259 skb_warn_bad_offload+0x7c/0x108 gemini-ethernet-port: caps=(0x0000010000154813, 0x00002007ffdd7889) And the packets do not go through. The TSO implementation is bogus: a TSO enabled driver must propagate the skb_shinfo(skb)->gso_size value to the TSO engine on the NIC. Drop the size check and TSO offloading features for now: this needs to be fixed up properly. After this ethernet works fine on Gemini devices with a direct connected PHY such as D-Link DNS-313. Also tested to still be working with a DSA switch using the Gemini ethernet as conduit interface. Link: https://lore.kernel.org/netdev/CANn89iJLfxng1sYL5Zk0mknXpyYQPCp83m3KgD2KJ2_hKCpEUg@mail.gmail.com/ Suggested-by: Eric Dumazet <[email protected]> Fixes: d4d0c5b4d279 ("net: ethernet: cortina: Handle large frames") Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksander Jan Bajkowski <[email protected]> Date: Mon Sep 23 23:49:49 2024 +0200 net: ethernet: lantiq_etop: fix memory disclosure [ Upstream commit 45c0de18ff2dc9af01236380404bbd6a46502c69 ] When applying padding, the buffer is not zeroed, which results in memory disclosure. The mentioned data is observed on the wire. This patch uses skb_put_padto() to pad Ethernet frames properly. The mentioned function zeroes the expanded buffer. In case the packet cannot be padded it is silently dropped. Statistics are also not incremented. This driver does not support statistics in the old 32-bit format or the new 64-bit format. These will be added in the future. In its current form, the patch should be easily backported to stable versions. Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets in hardware, so software padding must be applied. Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Moon Yeounsu <[email protected]> Date: Wed Aug 7 19:07:21 2024 +0900 net: ethernet: use ip_hdrlen() instead of bit shift [ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ] `ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by: Moon Yeounsu <[email protected]> Reviewed-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anastasia Kovaleva <[email protected]> Date: Thu Oct 3 13:44:31 2024 +0300 net: Fix an unsafe loop on the list commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream. The kernel may crash when deleting a genetlink family if there are still listeners for that family: Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0 LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0 Call Trace: __netlink_clear_multicast_users+0x74/0xc0 genl_unregister_family+0xd4/0x2d0 Change the unsafe loop on the list to a safe one, because inside the loop there is an element removal from this list. Fixes: b8273570f802 ("genetlink: fix netns vs. netlink table locking (2)") Cc: [email protected] Signed-off-by: Anastasia Kovaleva <[email protected]> Reviewed-by: Dmitry Bogdanov <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jacky Chou <[email protected]> Date: Fri Sep 6 14:28:31 2024 +0800 net: ftgmac100: Enable TX interrupt to avoid TX timeout [ Upstream commit fef2843bb49f414d1523ca007d088071dee0e055 ] Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jacky Chou <[email protected]> Date: Thu Aug 22 15:30:06 2024 +0800 net: ftgmac100: Ensure tx descriptor updates are visible [ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ] The driver must ensure TX descriptor updates are visible before updating TX pointer and TX clear pointer. This resolves TX hangs observed on AST2600 when running iperf3. Signed-off-by: Jacky Chou <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eyal Birger <[email protected]> Date: Tue Mar 22 06:39:54 2022 +0200 net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT commit 36c2e31ad25bd087756b8db9584994d1d80c236b upstream. Add missing netlink attribute policy and size calculation. Also enable strict validation from this new attribute onwards. Fixes: 435fe1c0c1f7 ("net: geneve: support IPv4/IPv6 as inner protocol") Signed-off-by: Eyal Birger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eyal Birger <[email protected]> Date: Wed Mar 16 08:15:57 2022 +0200 net: geneve: support IPv4/IPv6 as inner protocol [ Upstream commit 435fe1c0c1f74b682dba85641406abf4337aade6 ] This patch adds support for encapsulating IPv4/IPv6 within GENEVE. In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs to be provided at device creation. This property cannot be changed for the time being. In case IP traffic is received on a non-tun device the drop count is increased. Signed-off-by: Eyal Birger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Stable-dep-of: c471236b2359 ("bareudp: Pull inner IP header on xmit.") Signed-off-by: Sasha Levin <[email protected]>
Author: David Ahern <[email protected]> Date: Wed Apr 13 11:43:20 2022 -0600 net: Handle l3mdev in ip_tunnel_init_flow commit db53cd3d88dc328dea2e968c9c8d3b4294a8a674 upstream. Ido reported that the commit referenced in the Fixes tag broke a gre use case with dummy devices. Add a check to ip_tunnel_init_flow to see if the oif is an l3mdev port and if so set the oif to 0 to avoid the oif comparison in fib_lookup_good_nhc. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Ido Schimmel <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Tue Aug 27 16:44:19 2024 +0200 net: hisilicon: hip04: fix OF node leak in probe() [ Upstream commit 17555297dbd5bccc93a01516117547e26a61caf1 ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Tue Aug 27 16:44:20 2024 +0200 net: hisilicon: hns_dsaf_mac: fix OF node leak in hns_mac_get_info() [ Upstream commit 5680cf8d34e1552df987e2f4bb1bff0b2a8c8b11 ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in hns_mac_get_info(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Tue Aug 27 16:44:21 2024 +0200 net: hisilicon: hns_mdio: fix OF node leak in probe() [ Upstream commit e62beddc45f487b9969821fad3a0913d9bc18a2f ] Driver is leaking OF node reference from of_parse_phandle_with_fixed_args() in probe(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rosen Penev <[email protected]> Date: Mon Oct 7 16:57:11 2024 -0700 net: ibm: emac: mal: fix wrong goto [ Upstream commit 08c8acc9d8f3f70d62dd928571368d5018206490 ] dcr_map is called in the previous if and therefore needs to be unmapped. Fixes: 1ff0fcfcb1a6 ("ibm_newemac: Fix new MAL feature handling") Signed-off-by: Rosen Penev <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Wed Sep 11 17:42:34 2024 +0800 net: ieee802154: mcr20a: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit 09573b1cc76e7ff8f056ab29ea1cdc152ec8c653 ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Reviewed-by: Miquel Raynal <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Stefan Schmidt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Justin Iurman <[email protected]> Date: Wed Sep 11 19:45:57 2024 +0200 net: ipv6: rpl_iptunnel: Fix memory leak in rpl_input [ Upstream commit 2c84b0aa28b9e73e8c4b4ce038269469434ae372 ] Free the skb before returning from rpl_input when skb_cow_head() fails. Use a "drop" label and goto instructions. Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Signed-off-by: Justin Iurman <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Weißschuh <[email protected]> Date: Mon Sep 16 20:57:13 2024 +0200 net: ipv6: select DST_CACHE from IPV6_RPL_LWTUNNEL [ Upstream commit 93c21077bb9ba08807c459982d440dbbee4c7af3 ] The rpl sr tunnel code contains calls to dst_cache_*() which are only present when the dst cache is built. Select DST_CACHE to build the dst cache, similar to other kconfig options in the same file. Compiling the rpl sr tunnel without DST_CACHE will lead to linker errors. Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Signed-off-by: Thomas Weißschuh <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Simon Horman <[email protected]> # build-tested Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Simon Horman <[email protected]> Date: Tue Aug 6 12:28:24 2024 +0100 net: mvpp2: Increase size of queue_name buffer [ Upstream commit 91d516d4de48532d967a77967834e00c8c53dfe6 ] Increase size of queue_name buffer from 30 to 31 to accommodate the largest string written to it. This avoids truncation in the possibly unlikely case where the string is name is the maximum size. Flagged by gcc-14: .../mvpp2_main.c: In function 'mvpp2_probe': .../mvpp2_main.c:7636:32: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ^ .../mvpp2_main.c:7635:9: note: 'snprintf' output between 10 and 31 bytes into a destination of size 30 7635 | snprintf(priv->queue_name, sizeof(priv->queue_name), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7636 | "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev), | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 7637 | priv->port_count > 1 ? "+" : ""); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Introduced by commit 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics"). I am not flagging this as a bug as I am not aware that it is one. Compile tested only. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Marcin Wojtas <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Thu Oct 3 21:03:21 2024 +0200 net: phy: bcm84881: Fix some error handling paths [ Upstream commit 9234a2549cb6ac038bec36cc7c084218e9575513 ] If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned instead of 'val' which is likely to be 0. Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ingo van Lil <[email protected]> Date: Wed Oct 2 18:18:07 2024 +0200 net: phy: dp83869: fix memory corruption when enabling fiber [ Upstream commit a842e443ca8184f2dc82ab307b43a8b38defd6a5 ] When configuring the fiber port, the DP83869 PHY driver incorrectly calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit number (10). This corrupts some other memory location -- in case of arm64 the priv pointer in the same structure. Since the advertising flags are updated from supported at the end of the function the incorrect line isn't needed at all and can be removed. Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection") Signed-off-by: Ingo van Lil <[email protected]> Reviewed-by: Alexander Sverdlin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pawel Dembicki <[email protected]> Date: Fri Aug 9 21:38:06 2024 +0200 net: phy: vitesse: repair vsc73xx autonegotiation [ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ] When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Pawel Dembicki <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Youssef Samir <[email protected]> Date: Mon Sep 16 19:08:58 2024 +0200 net: qrtr: Update packets cloning when broadcasting [ Upstream commit f011b313e8ebd5b7abd8521b5119aecef403de45 ] When broadcasting data to multiple nodes via MHI, using skb_clone() causes all nodes to receive the same header data. This can result in packets being discarded by endpoints, leading to lost data. This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT packet is broadcasted. All nodes receive the same destination node ID, causing the node connected to the client to discard the packet and remain unaware of the client's deletion. Replace skb_clone() with pskb_copy(), to create a separate copy of the header for each sk_buff. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Youssef Samir <[email protected]> Reviewed-by: Jeffery Hugo <[email protected]> Reviewed-by: Carl Vanderlip <[email protected]> Reviewed-by: Chris Lew <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Wed Sep 4 14:54:01 2024 +0300 net: sched: consistently use rcu_replace_pointer() in taprio_change() [ Upstream commit d5c4546062fd6f5dbce575c7ea52ad66d1968678 ] According to Vinicius (and carefully looking through the whole https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa once again), txtime branch of 'taprio_change()' is not going to race against 'advance_sched()'. But using 'rcu_replace_pointer()' in the former may be a good idea as well. Suggested-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: Dmitry Antipov <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kaixin Wang <[email protected]> Date: Sun Sep 15 22:40:46 2024 +0800 net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition [ Upstream commit b5109b60ee4fcb2f2bb24f589575e10cc5283ad4 ] In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. Fixes: 6fd9c53f7186 ("net: seeq: Convert timers to use timer_setup()") Signed-off-by: Kaixin Wang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrea Mayer <[email protected]> Date: Wed Jun 8 11:19:17 2022 +0200 net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev commit a3bd2102e464202b58d57390a538d96f57ffc361 upstream. Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") adds a new entry (flowi_l3mdev) in the common flow struct used for indicating the l3mdev index for later rule and table matching. The l3mdev_update_flow() has been adapted to properly set the flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid flowi_iif is supplied to the l3mdev_update_flow(), this function can update the flowi_l3mdev entry only if it has not yet been set (i.e., the flowi_l3mdev entry is equal to 0). The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to force the routing lookup into the associated routing table. This routing operation is performed by seg6_lookup_any_nextop() preparing a flowi6 data structure used by ip6_route_input_lookup() which, in turn, (indirectly) invokes l3mdev_update_flow(). However, seg6_lookup_any_nexthop() does not initialize the new flowi_l3mdev entry which is filled with random garbage data. This prevents l3mdev_update_flow() from properly updating the flowi_l3mdev with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are broken. This patch correctly initializes the flowi6 instance allocated and used by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance is wiped out: in case new entries are added to flowi/flowi6 (as happened with the flowi_l3mdev entry), we should no longer have incorrectly initialized values. As a result of this operation, the value of flowi_l3mdev is also set to 0. The proposed fix can be tested easily. Starting from the commit referenced in the Fixes, selftests [1],[2] indicate that the SRv6 End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying this patch, those behaviors are back to work properly again. [1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh [2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Anton Makarov <[email protected]> Signed-off-by: Andrea Mayer <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: KhaiWenTan <[email protected]> Date: Wed Sep 18 14:14:22 2024 +0800 net: stmmac: Fix zero-division error when disabling tc cbs commit 675faf5a14c14a2be0b870db30a70764df81e2df upstream. The commit b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") allows the "port_transmit_rate_kbps" to be set to a value of 0, which is then passed to the "div_s64" function when tc-cbs is disabled. This leads to a zero-division error. When tc-cbs is disabled, the idleslope, sendslope, and credit values the credit values are not required to be configured. Therefore, adding a return statement after setting the txQ mode to DCB when tc-cbs is disabled would prevent a zero-division error. Fixes: b8c43360f6e4 ("net: stmmac: No need to calculate speed divider when offload is disabled") Cc: <[email protected]> Co-developed-by: Choong Yong Liang <[email protected]> Signed-off-by: Choong Yong Liang <[email protected]> Signed-off-by: KhaiWenTan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Su Hui <[email protected]> Date: Thu Sep 12 19:01:20 2024 +0800 net: tipc: avoid possible garbage value [ Upstream commit 99655a304e450baaae6b396cb942b9e47659d644 ] Clang static checker (scan-build) warning: net/tipc/bcast.c:305:4: The expression is an uninitialized value. The computed value will also be garbage [core.uninitialized.Assign] 305 | (*cong_link_cnt)++; | ^~~~~~~~~~~~~~~~~~ tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt is uninitialized. Although it won't really cause a problem, it's better to fix it. Fixes: dca4a17d24ee ("tipc: fix potential hanging after b/rcast changing") Signed-off-by: Su Hui <[email protected]> Reviewed-by: Justin Stitt <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Antoine Tenart <[email protected]> Date: Tue Dec 20 18:18:25 2022 +0100 net: vrf: determine the dst using the original ifindex for multicast commit f2575c8f404911da83f25b688e12afcf4273e640 upstream. Multicast packets received on an interface bound to a VRF are marked as belonging to the VRF and the skb device is updated to point to the VRF device itself. This was fine even when a route was associated to a device as when performing a fib table lookup 'oif' in fib6_table_lookup (coming from 'skb->dev->ifindex' in ip6_route_input) was set to 0 when FLOWI_FLAG_SKIP_NH_OIF was set. With commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") this is not longer true and multicast traffic is not received on the original interface. Instead of adding back a similar check in fib6_table_lookup determine the dst using the original ifindex for multicast VRF traffic. To make things consistent across the function do the above for all strict packets, which was the logic before commit 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF"). Note that reverting to this behavior should be fine as the change was about marking packets belonging to the VRF, not about their dst. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Andy Roulin <[email protected]> Date: Tue Oct 1 08:43:59 2024 -0700 netfilter: br_netfilter: fix panic with metadata_dst skb [ Upstream commit f9ff7665cd128012868098bbd07e28993e314fdb ] Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Andy Roulin <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Simon Horman <[email protected]> Date: Mon Sep 16 16:14:41 2024 +0100 netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS [ Upstream commit e1f1ee0e9ad8cbe660f5c104e791c5f1a7cf4c31 ] Only provide ctnetlink_label_size when it is used, which is when CONFIG_NF_CONNTRACK_EVENTS is configured. Flagged by clang-18 W=1 builds as: .../nf_conntrack_netlink.c:385:19: warning: unused function 'ctnetlink_label_size' [-Wunused-function] 385 | static inline int ctnetlink_label_size(const struct nf_conn *ct) | ^~~~~~~~~~~~~~~~~~~~ The condition on CONFIG_NF_CONNTRACK_LABELS being removed by this patch guards compilation of non-trivial implementations of ctnetlink_dump_labels() and ctnetlink_label_size(). However, this is not necessary as each of these functions will always return 0 if CONFIG_NF_CONNTRACK_LABELS is not defined as each function starts with the equivalent of: struct nf_conn_labels *labels = nf_ct_labels_find(ct); if (!labels) return 0; And nf_ct_labels_find always returns NULL if CONFIG_NF_CONNTRACK_LABELS is not enabled. So I believe that the compiler optimises the code away in such cases anyway. Found by inspection. Compile tested only. Originally splitted in two patches, Pablo Neira Ayuso collapsed them and added Fixes: tag. Fixes: 0ceabd83875b ("netfilter: ctnetlink: deliver labels to userspace") Link: https://lore.kernel.org/netfilter-devel/[email protected]/ Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Florian Westphal <[email protected]> Date: Wed Oct 9 09:19:02 2024 +0200 netfilter: fib: check correct rtable in vrf setups [ Upstream commit 05ef7055debc804e8083737402127975e7244fc4 ] We need to init l3mdev unconditionally, else main routing table is searched and incorrect result is returned unless strict (iif keyword) matching is requested. Next patch adds a selftest for this. Fixes: 2a8a7c0eaa87 ("netfilter: nft_fib: Fix for rpath check with VRF devices") Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1761 Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Phil Sutter <[email protected]> Date: Thu Feb 16 17:05:36 2023 +0100 netfilter: ip6t_rpfilter: Fix regression with VRF interfaces commit efb056e5f1f0036179b2f92c1c15f5ea7a891d70 upstream. When calling ip6_route_lookup() for the packet arriving on the VRF interface, the result is always the real (slave) interface. Expect this when validating the result. Fixes: acc641ab95b66 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field") Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Fri Sep 13 17:06:15 2024 +0000 netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put() [ Upstream commit 9c778fe48d20ef362047e3376dee56d77f8500d4 ] syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending garbage on the four reserved tcp bits (th->res1) Use skb_put_zero() to clear the whole TCP header, as done in nf_reject_ip_tcphdr_put() BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 do_softirq+0x9a/0x100 kernel/softirq.c:455 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366 inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135 __tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143 tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333 __inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679 inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750 __sys_connect_file net/socket.c:2061 [inline] __sys_connect+0x606/0x690 net/socket.c:2078 __do_sys_connect net/socket.c:2088 [inline] __se_sys_connect net/socket.c:2085 [inline] __x64_sys_connect+0x91/0xe0 net/socket.c:2085 x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was stored to memory at: nf_reject_ip6_tcphdr_put+0x2ca/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:231 nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Uninit was created at: slab_post_alloc_hook mm/slub.c:3998 [inline] slab_alloc_node mm/slub.c:4041 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4084 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] nf_send_reset6+0x98d/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:327 nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775 process_backlog+0x4ad/0xa50 net/core/dev.c:6108 __napi_poll+0xe7/0x980 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963 handle_softirqs+0x1ce/0x800 kernel/softirq.c:554 __do_softirq+0x14/0x1a kernel/softirq.c:588 Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Pablo Neira Ayuso <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue Sep 3 01:06:41 2024 +0200 netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire [ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ] Element timeout that is below CONFIG_HZ never expires because the timeout extension is not allocated given that nf_msecs_to_jiffies64() returns 0. Set timeout to the minimum value to honor timeout. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Phil Sutter <[email protected]> Date: Thu Sep 12 14:21:33 2024 +0200 netfilter: nf_tables: Keep deleted flowtable hooks until after RCU [ Upstream commit 642c89c475419b4d0c0d90e29d9c1a0e4351f379 ] Documentation of list_del_rcu() warns callers to not immediately free the deleted list item. While it seems not necessary to use the RCU-variant of list_del() here in the first place, doing so seems to require calling kfree_rcu() on the deleted item as well. Fixes: 3f0465a9ef02 ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables") Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue Sep 17 22:25:50 2024 +0200 netfilter: nf_tables: missing iterator type in lookup walk commit efefd4f00c967d00ad7abe092554ffbb70c1a793 upstream. Add missing decorator type to lookup expression and tighten WARN_ON_ONCE check in pipapo to spot earlier that this is unset. Fixes: 29b359cf6d95 ("netfilter: nft_set_pipapo: walk over current view on netlink dump") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Thu Sep 26 18:56:11 2024 +0000 netfilter: nf_tables: prevent nf_skb_duplicated corruption [ Upstream commit 92ceba94de6fb4cee2bf40b485979c342f44a492 ] syzbot found that nf_dup_ipv4() or nf_dup_ipv6() could write per-cpu variable nf_skb_duplicated in an unsafe way [1]. Disabling preemption as hinted by the splat is not enough, we have to disable soft interrupts as well. [1] BUG: using __this_cpu_write() in preemptible [00000000] code: syz.4.282/6316 caller is nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 CPU: 0 UID: 0 PID: 6316 Comm: syz.4.282 Not tainted 6.11.0-rc7-syzkaller-00104-g7052622fccb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_preemption_disabled+0x10e/0x120 lib/smp_processor_id.c:49 nf_dup_ipv4+0x651/0x8f0 net/ipv4/netfilter/nf_dup_ipv4.c:87 nft_dup_ipv4_eval+0x1db/0x300 net/ipv4/netfilter/nft_dup_ipv4.c:30 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_ipv4+0x202/0x320 net/netfilter/nft_chain_filter.c:23 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook+0x2c4/0x450 include/linux/netfilter.h:269 NF_HOOK_COND include/linux/netfilter.h:302 [inline] ip_output+0x185/0x230 net/ipv4/ip_output.c:433 ip_local_out net/ipv4/ip_output.c:129 [inline] ip_send_skb+0x74/0x100 net/ipv4/ip_output.c:1495 udp_send_skb+0xacf/0x1650 net/ipv4/udp.c:981 udp_sendmsg+0x1c21/0x2a60 net/ipv4/udp.c:1269 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f4ce4f7def9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f4ce5d4a038 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f4ce5135f80 RCX: 00007f4ce4f7def9 RDX: 0000000000000001 RSI: 0000000020005d40 RDI: 0000000000000006 RBP: 00007f4ce4ff0b76 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f4ce5135f80 R15: 00007ffd4cbc6d68 </TASK> Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue Sep 3 01:06:49 2024 +0200 netfilter: nf_tables: reject element expiration with no timeout [ Upstream commit d2dc429ecb4e79ad164028d965c00f689e6f6d06 ] If element timeout is unset and set provides no default timeout, the element expiration is silently ignored, reject this instead to let user know this is unsupported. Also prepare for supporting timeout that never expire, where zero timeout and expiration must be also rejected. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue Sep 3 01:06:58 2024 +0200 netfilter: nf_tables: reject expiration higher than timeout [ Upstream commit c0f38a8c60174368aed1d0f9965d733195f15033 ] Report ERANGE to userspace if user specifies an expiration larger than the timeout. Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue Sep 17 22:25:49 2024 +0200 netfilter: nft_set_pipapo: walk over current view on netlink dump commit 29b359cf6d95fd60730533f7f10464e95bd17c73 upstream. The generation mask can be updated while netlink dump is in progress. The pipapo set backend walk iterator cannot rely on it to infer what view of the datastructure is to be used. Add notation to specify if user wants to read/update the set. Based on patch from Florian Westphal. Fixes: 2b84e215f874 ("netfilter: nft_set_pipapo: .walk does not deal with generations") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Phil Sutter <[email protected]> Date: Wed Oct 5 18:07:05 2022 +0200 netfilter: rpfilter/fib: Populate flowic_l3mdev field [ Upstream commit acc641ab95b66b813c1ce856c377a2bbe71e7f52 ] Use the introduced field for correct operation with VRF devices instead of conditionally overwriting flowic_oif. This is a partial revert of commit b575b24b8eee3 ("netfilter: Fix rpfilter dropping vrf packets by mistake"), implementing a simpler solution. Signed-off-by: Phil Sutter <[email protected]> Reviewed-by: David Ahern <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups") Signed-off-by: Sasha Levin <[email protected]>
Author: Guillaume Nault <[email protected]> Date: Thu Oct 13 16:37:47 2022 +0200 netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces. [ Upstream commit 1fcc064b305a1aadeff0d4bff961094d27660acd ] Currently netfilter's rpfilter and fib modules implicitely initialise ->flowic_uid with 0. This is normally the root UID. However, this isn't the case in user namespaces, where user ID 0 is mapped to a different kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get the root UID of the user namespace, thus keeping the same behaviour whether or not we're running in a user namepspace. Note, this is similar to commit 8bcfd0925ef1 ("ipv4: add missing initialization for flowi4_uid"), which fixed the rp_filter sysctl. Fixes: 622ec2c9d524 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Stable-dep-of: 05ef7055debc ("netfilter: fib: check correct rtable in vrf setups") Signed-off-by: Sasha Levin <[email protected]>
Author: Phil Sutter <[email protected]> Date: Wed Sep 25 20:01:20 2024 +0200 netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED [ Upstream commit 76f1ed087b562a469f2153076f179854b749c09a ] Fix the comment which incorrectly defines it as NLA_U32. Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Wed Sep 11 17:44:45 2024 +0800 nfp: Use IRQF_NO_AUTOEN flag in request_irq() [ Upstream commit daaba19d357f0900b303a530ced96c78086267ea ] disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Trond Myklebust <[email protected]> Date: Wed Aug 21 14:05:02 2024 -0400 NFS: Avoid unnecessary rescanning of the per-server delegation list [ Upstream commit f92214e4c312f6ea9d78650cc6291d200f17abb6 ] If the call to nfs_delegation_grab_inode() fails, we will not have dropped any locks that require us to rescan the list. Signed-off-by: Trond Myklebust <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Li Lingfeng <[email protected]> Date: Wed Sep 4 20:34:57 2024 +0800 nfs: fix memory leak in error path of nfs4_do_reclaim commit 8f6a7c9467eaf39da4c14e5474e46190ab3fb529 upstream. Commit c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()") separate out the freeing of the state owners from nfs4_purge_state_owners() and finish it outside the rcu lock. However, the error path is omitted. As a result, the state owners in "freeme" will not be released. Fix it by adding freeing in the error path. Fixes: c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()") Signed-off-by: Li Lingfeng <[email protected]> Cc: [email protected] # v5.3+ Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Guoqing Jiang <[email protected]> Date: Wed Aug 21 22:03:18 2024 +0800 nfsd: call cache_put if xdr_reserve_space returns NULL [ Upstream commit d078cbf5c38de83bc31f83c47dcd2184c04a50c7 ] If not enough buffer space available, but idmap_lookup has triggered lookup_fn which calls cache_get and returns successfully. Then we missed to call cache_put here which pairs with cache_get. Fixes: ddd1ea563672 ("nfsd4: use xdr_reserve_space in attribute encoding") Signed-off-by: Guoqing Jiang <[email protected]> Reviwed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: NeilBrown <[email protected]> Date: Mon Sep 9 15:06:36 2024 +1000 nfsd: fix delegation_blocked() to block correctly for at least 30 seconds commit 45bb63ed20e02ae146336412889fe5450316a84f upstream. The pair of bloom filtered used by delegation_blocked() was intended to block delegations on given filehandles for between 30 and 60 seconds. A new filehandle would be recorded in the "new" bit set. That would then be switch to the "old" bit set between 0 and 30 seconds later, and it would remain as the "old" bit set for 30 seconds. Unfortunately the code intended to clear the old bit set once it reached 30 seconds old, preparing it to be the next new bit set, instead cleared the *new* bit set before switching it to be the old bit set. This means that the "old" bit set is always empty and delegations are blocked between 0 and 30 seconds. This patch updates bd->new before clearing the set with that index, instead of afterwards. Reported-by: Olga Kornievskaia <[email protected]> Cc: [email protected] Fixes: 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.") Signed-off-by: NeilBrown <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chuck Lever <[email protected]> Date: Sun Aug 11 13:11:07 2024 -0400 NFSD: Fix NFSv4's PUTPUBFH operation commit 202f39039a11402dcbcd5fece8d9fa6be83f49ae upstream. According to RFC 8881, all minor versions of NFSv4 support PUTPUBFH. Replace the XDR decoder for PUTPUBFH with a "noop" since we no longer want the minorversion check, and PUTPUBFH has no arguments to decode. (Ideally nfsd4_decode_noop should really be called nfsd4_decode_void). PUTPUBFH should now behave just like PUTROOTFH. Reported-by: Cedric Blancher <[email protected]> Fixes: e1a90ebd8b23 ("NFSD: Combine decode operations for v4 and v4.1") Cc: Dan Shelton <[email protected]> Cc: Roland Mainz <[email protected]> Cc: [email protected] Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jeff Layton <[email protected]> Date: Wed Jul 10 09:05:32 2024 -0400 nfsd: fix refcount leak when file is unhashed after being found [ Upstream commit 8a7926176378460e0d91e02b03f0ff20a8709a60 ] If we wait_for_construction and find that the file is no longer hashed, and we're going to retry the open, the old nfsd_file reference is currently leaked. Put the reference before retrying. Fixes: c6593366c0bf ("nfsd: don't kill nfsd_files because of lease break error") Signed-off-by: Jeff Layton <[email protected]> Tested-by: Youzhong Yang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Li Lingfeng <[email protected]> Date: Sat Aug 17 14:27:13 2024 +0800 nfsd: map the EBADMSG to nfserr_io to avoid warning commit 340e61e44c1d2a15c42ec72ade9195ad525fd048 upstream. Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30 Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Cc: [email protected] Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chuck Lever <[email protected]> Date: Sat Sep 21 14:25:37 2024 -0400 NFSD: Mark filecache "down" if init fails [ Upstream commit dc0d0f885aa422f621bc1c2124133eff566b0bc8 ] NeilBrown says: > The handling of NFSD_FILE_CACHE_UP is strange. nfsd_file_cache_init() > sets it, but doesn't clear it on failure. So if nfsd_file_cache_init() > fails for some reason, nfsd_file_cache_shutdown() would still try to > clean up if it was called. Reported-by: NeilBrown <[email protected]> Fixes: c7b824c3d06c ("NFSD: Replace the "init once" mechanism") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jeff Layton <[email protected]> Date: Thu Jul 11 15:11:13 2024 -0400 nfsd: remove unneeded EEXIST error check in nfsd_do_file_acquire [ Upstream commit 81a95c2b1d605743220f28db04b8da13a65c4059 ] Given that we do the search and insertion while holding the i_lock, I don't think it's possible for us to get EEXIST here. Remove this case. Fixes: c6593366c0bf ("nfsd: don't kill nfsd_files because of lease break error") Signed-off-by: Jeff Layton <[email protected]> Tested-by: Youzhong Yang <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Li Lingfeng <[email protected]> Date: Tue Sep 3 19:14:46 2024 +0800 nfsd: return -EINVAL when namelen is 0 [ Upstream commit 22451a16b7ab7debefce660672566be887db1637 ] When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may result in namelen being 0, which will cause memdup_user() to return ZERO_SIZE_PTR. When we access the name.data that has been assigned the value of ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is triggered. [ T1205] ================================================================== [ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260 [ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205 [ T1205] [ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406 [ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ T1205] Call Trace: [ T1205] dump_stack+0x9a/0xd0 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] __kasan_report.cold+0x34/0x84 [ T1205] ? nfs4_client_to_reclaim+0xe9/0x260 [ T1205] kasan_report+0x3a/0x50 [ T1205] nfs4_client_to_reclaim+0xe9/0x260 [ T1205] ? nfsd4_release_lockowner+0x410/0x410 [ T1205] cld_pipe_downcall+0x5ca/0x760 [ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0 [ T1205] ? down_write_killable_nested+0x170/0x170 [ T1205] ? avc_policy_seqno+0x28/0x40 [ T1205] ? selinux_file_permission+0x1b4/0x1e0 [ T1205] rpc_pipe_write+0x84/0xb0 [ T1205] vfs_write+0x143/0x520 [ T1205] ksys_write+0xc9/0x170 [ T1205] ? __ia32_sys_read+0x50/0x50 [ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110 [ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110 [ T1205] do_syscall_64+0x33/0x40 [ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1 [ T1205] RIP: 0033:0x7fdbdb761bc7 [ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514 [ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7 [ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008 [ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001 [ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b [ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000 [ T1205] ================================================================== Fix it by checking namelen. Signed-off-by: Li Lingfeng <[email protected]> Fixes: 74725959c33c ("nfsd: un-deprecate nfsdcld") Reviewed-by: Jeff Layton <[email protected]> Reviewed-by: Scott Mayhew <[email protected]> Tested-by: Scott Mayhew <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yanjun Zhang <[email protected]> Date: Tue Oct 1 16:39:30 2024 +0800 NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies() [ Upstream commit a848c29e3486189aaabd5663bc11aea50c5bd144 ] On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32c8a56 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryusuke Konishi <[email protected]> Date: Wed Sep 4 17:13:08 2024 +0900 nilfs2: determine empty node blocks as corrupted [ Upstream commit 111b812d3662f3a1b831d19208f83aa711583fe6 ] Due to the nature of b-trees, nilfs2 itself and admin tools such as mkfs.nilfs2 will never create an intermediate b-tree node block with 0 child nodes, nor will they delete (key, pointer)-entries that would result in such a state. However, it is possible that a b-tree node block is corrupted on the backing device and is read with 0 child nodes. Because operation is not guaranteed if the number of child nodes is 0 for intermediate node blocks other than the root node, modify nilfs_btree_node_broken(), which performs sanity checks when reading a b-tree node block, so that such cases will be judged as metadata corruption. Link: https://lkml.kernel.org/r/[email protected] Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi <[email protected]> Cc: Lizhi Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryusuke Konishi <[email protected]> Date: Wed Sep 4 17:13:07 2024 +0900 nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() [ Upstream commit 9403001ad65ae4f4c5de368bdda3a0636b51d51a ] Patch series "nilfs2: fix potential issues with empty b-tree nodes". This series addresses three potential issues with empty b-tree nodes that can occur with corrupted filesystem images, including one recently discovered by syzbot. This patch (of 3): If a b-tree is broken on the device, and the b-tree height is greater than 2 (the level of the root node is greater than 1) even if the number of child nodes of the b-tree root is 0, a NULL pointer dereference occurs in nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert(). This is because, when the number of child nodes of the b-tree root is 0, nilfs_btree_do_lookup() does not set the block buffer head in any of path[x].bp_bh, leaving it as the initial value of NULL, but if the level of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(), which accesses the buffer memory of path[x].bp_bh, is called. Fix this issue by adding a check to nilfs_btree_root_broken(), which performs sanity checks when reading the root node from the device, to detect this inconsistency. Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause early on. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=9bff4c7b992038a7409f Cc: Lizhi Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryusuke Konishi <[email protected]> Date: Wed Sep 4 17:13:09 2024 +0900 nilfs2: fix potential oob read in nilfs_btree_check_delete() [ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ] The function nilfs_btree_check_delete(), which checks whether degeneration to direct mapping occurs before deleting a b-tree entry, causes memory access outside the block buffer when retrieving the maximum key if the root node has no entries. This does not usually happen because b-tree mappings with 0 child nodes are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen if the b-tree root node read from a device is configured that way, so fix this potential issue by adding a check for that case. Link: https://lkml.kernel.org/r/[email protected] Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping") Signed-off-by: Ryusuke Konishi <[email protected]> Cc: Lizhi Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yonatan Maman <[email protected]> Date: Tue Oct 8 14:59:43 2024 +0300 nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error commit 835745a377a4519decd1a36d6b926e369b3033e2 upstream. The `nouveau_dmem_copy_one` function ensures that the copy push command is sent to the device firmware but does not track whether it was executed successfully. In the case of a copy error (e.g., firmware or hardware failure), the copy push command will be sent via the firmware channel, and `nouveau_dmem_copy_one` will likely report success, leading to the `migrate_to_ram` function returning a dirty HIGH_USER page to the user. This can result in a security vulnerability, as a HIGH_USER page that may contain sensitive or corrupted data could be returned to the user. To prevent this vulnerability, we allocate a zero page. Thus, in case of an error, a non-dirty (zero) page will be returned to the user. Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM") Signed-off-by: Yonatan Maman <[email protected]> Co-developed-by: Gal Shalom <[email protected]> Signed-off-by: Gal Shalom <[email protected]> Reviewed-by: Ben Skeggs <[email protected]> Cc: [email protected] Signed-off-by: Danilo Krummrich <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Thu Aug 31 20:39:27 2023 +0800 ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir() [ Upstream commit e229897d373a87ee09ec5cc4ecd4bb2f895fc16b ] The debugfs_create_dir() function returns error pointers. It never returns NULL. So use IS_ERR() to check it. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kaixin Wang <[email protected]> Date: Tue Sep 10 01:20:07 2024 +0800 ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition [ Upstream commit e51aded92d42784313ba16c12f4f88cc4f973bbb ] In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove. Signed-off-by: Kaixin Wang <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Max Hawking <[email protected]> Date: Sun Oct 8 20:45:16 2023 -0700 ntb_perf: Fix printk format [ Upstream commit 1501ae7479c8d0f66efdbfdc9ae8d6136cefbd37 ] The correct printk format is %pa or %pap, but not %pa[p]. Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk") Signed-off-by: Max Hawking <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ferry Meng <[email protected]> Date: Mon May 20 10:40:23 2024 +0800 ocfs2: add bounds checking to ocfs2_xattr_find_entry() [ Upstream commit 9e3041fecdc8f78a5900c3aa51d3d756e73264d6 ] Add a paranoia check to make sure it doesn't stray beyond valid memory region containing ocfs2 xattr entries when scanning for a match. It will prevent out-of-bound access in case of crafted images. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ferry Meng <[email protected]> Signed-off-by: Joseph Qi <[email protected]> Reported-by: lei lu <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Stable-dep-of: af77c4fc1871 ("ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()") Signed-off-by: Sasha Levin <[email protected]>
Author: Joseph Qi <[email protected]> Date: Wed Sep 4 15:10:03 2024 +0800 ocfs2: cancel dqi_sync_work before freeing oinfo commit 35fccce29feb3706f649726d410122dd81b92c18 upstream. ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the end, if error occurs after successfully reading global quota, it will trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled: ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c This reports that there is an active delayed work when freeing oinfo in error handling, so cancel dqi_sync_work first. BTW, return status instead of -1 when .read_file_info fails. Link: https://syzkaller.appspot.com/bug?extid=f7af59df5d6b25f0febd Link: https://lkml.kernel.org/r/[email protected] Fixes: 171bf93ce11f ("ocfs2: Periodic quota syncing") Signed-off-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Reported-by: [email protected] Tested-by: [email protected] Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Julian Sun <[email protected]> Date: Mon Sep 2 11:08:44 2024 +0800 ocfs2: fix null-ptr-deref when journal load failed. commit 5784d9fcfd43bd853654bb80c87ef293b9e8e80a upstream. During the mounting process, if journal_reset() fails because of too short journal, then lead to jbd2_journal_load() fails with NULL j_sb_buffer. Subsequently, ocfs2_journal_shutdown() calls jbd2_journal_flush()->jbd2_cleanup_journal_tail()-> __jbd2_update_log_tail()->jbd2_journal_update_sb_log_tail() ->lock_buffer(journal->j_sb_buffer), resulting in a null-pointer dereference error. To resolve this issue, we should check the JBD2_LOADED flag to ensure the journal was properly loaded. Additionally, use journal instead of osb->journal directly to simplify the code. Link: https://syzkaller.appspot.com/bug?extid=05b9b39d8bdfe1a0861f Link: https://lkml.kernel.org/r/[email protected] Fixes: f6f50e28f0cb ("jbd2: Fail to load a journal if it is too short") Signed-off-by: Julian Sun <[email protected]> Reported-by: [email protected] Suggested-by: Joseph Qi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lizhi Xu <[email protected]> Date: Mon Sep 2 10:36:36 2024 +0800 ocfs2: fix possible null-ptr-deref in ocfs2_set_buffer_uptodate commit 33b525cef4cff49e216e4133cc48452e11c0391e upstream. When doing cleanup, if flags without OCFS2_BH_READAHEAD, it may trigger NULL pointer dereference in the following ocfs2_set_buffer_uptodate() if bh is NULL. Link: https://lkml.kernel.org/r/[email protected] Fixes: cf76c78595ca ("ocfs2: don't put and assigning null to bh allocated outside") Signed-off-by: Lizhi Xu <[email protected]> Signed-off-by: Joseph Qi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reported-by: Heming Zhao <[email protected]> Suggested-by: Heming Zhao <[email protected]> Cc: <[email protected]> [4.20+] Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Mark Fasheh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Heming Zhao <[email protected]> Date: Fri Jul 19 19:43:10 2024 +0800 ocfs2: fix the la space leak when unmounting an ocfs2 volume commit dfe6c5692fb525e5e90cefe306ee0dffae13d35f upstream. This bug has existed since the initial OCFS2 code. The code logic in ocfs2_sync_local_to_main() is wrong, as it ignores the last contiguous free bits, which causes an OCFS2 volume to lose the last free clusters of LA window on each umount command. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Heming Zhao <[email protected]> Reviewed-by: Su Yue <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: Heming Zhao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Joseph Qi <[email protected]> Date: Wed Sep 25 17:06:00 2024 +0800 ocfs2: fix uninit-value in ocfs2_get_block() commit 2af148ef8549a12f8025286b8825c2833ee6bcb8 upstream. syzbot reported an uninit-value BUG: BUG: KMSAN: uninit-value in ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159 ocfs2_get_block+0xed2/0x2710 fs/ocfs2/aops.c:159 do_mpage_readpage+0xc45/0x2780 fs/mpage.c:225 mpage_readahead+0x43f/0x840 fs/mpage.c:374 ocfs2_readahead+0x269/0x320 fs/ocfs2/aops.c:381 read_pages+0x193/0x1110 mm/readahead.c:160 page_cache_ra_unbounded+0x901/0x9f0 mm/readahead.c:273 do_page_cache_ra mm/readahead.c:303 [inline] force_page_cache_ra+0x3b1/0x4b0 mm/readahead.c:332 force_page_cache_readahead mm/internal.h:347 [inline] generic_fadvise+0x6b0/0xa90 mm/fadvise.c:106 vfs_fadvise mm/fadvise.c:185 [inline] ksys_fadvise64_64 mm/fadvise.c:199 [inline] __do_sys_fadvise64 mm/fadvise.c:214 [inline] __se_sys_fadvise64 mm/fadvise.c:212 [inline] __x64_sys_fadvise64+0x1fb/0x3a0 mm/fadvise.c:212 x64_sys_call+0xe11/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:222 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f This is because when ocfs2_extent_map_get_blocks() fails, p_blkno is uninitialized. So the error log will trigger the above uninit-value access. The error log is out-of-date since get_blocks() was removed long time ago. And the error code will be logged in ocfs2_extent_map_get_blocks() once ocfs2_get_cluster() fails, so fix this by only logging inode and block. Link: https://syzkaller.appspot.com/bug?extid=9709e73bae885b05314b Link: https://lkml.kernel.org/r/[email protected] Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Joseph Qi <[email protected]> Reported-by: [email protected] Tested-by: [email protected] Cc: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lizhi Xu <[email protected]> Date: Mon Sep 2 10:36:35 2024 +0800 ocfs2: remove unreasonable unlock in ocfs2_read_blocks commit c03a82b4a0c935774afa01fd6d128b444fd930a1 upstream. Patch series "Misc fixes for ocfs2_read_blocks", v5. This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix the issue reported by syzbot, which detects bad unlock balance in ocfs2_read_blocks(). The second patch fixes an issue reported by Heming Zhao when reviewing above fix. This patch (of 2): There was a lock release before exiting, so remove the unreasonable unlock. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: cf76c78595ca ("ocfs2: don't put and assigning null to bh allocated outside") Signed-off-by: Lizhi Xu <[email protected]> Signed-off-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=ab134185af9ef88dfed5 Tested-by: [email protected] Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> [4.20+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Gautham Ananthakrishna <[email protected]> Date: Wed Sep 18 06:38:44 2024 +0000 ocfs2: reserve space for inline xattr before attaching reflink tree commit 5ca60b86f57a4d9648f68418a725b3a7de2816b0 upstream. One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. Link: https://lkml.kernel.org/r/[email protected] Fixes: ef962df057aa ("ocfs2: xattr: fix inlined xattr reflink") Signed-off-by: Gautham Ananthakrishna <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ferry Meng <[email protected]> Date: Mon May 20 10:40:24 2024 +0800 ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry() [ Upstream commit af77c4fc1871847b528d58b7fdafb4aa1f6a9262 ] xattr in ocfs2 maybe 'non-indexed', which saved with additional space requested. It's better to check if the memory is out of bound before memcmp, although this possibility mainly comes from crafted poisonous images. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ferry Meng <[email protected]> Signed-off-by: Joseph Qi <[email protected]> Reported-by: lei lu <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Mark Fasheh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Tue Aug 20 14:16:53 2024 +0200 of/irq: Refer to actual buffer size in of_irq_parse_one() [ Upstream commit 39ab331ab5d377a18fbf5a0e0b228205edfcc7f4 ] Replace two open-coded calculations of the buffer size by invocations of sizeof() on the buffer itself, to make sure the code will always use the actual buffer size. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.1724156125.git.geert+renesas@glider.be Signed-off-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrew Jones <[email protected]> Date: Sat Aug 17 09:41:08 2024 +0200 of/irq: Support #msi-cells=<0> in of_msi_get_domain commit db8e81132cf051843c9a59b46fa5a071c45baeb3 upstream. An 'msi-parent' property with a single entry and no accompanying '#msi-cells' property is considered the legacy definition as opposed to its definition after being expanded with commit 126b16e2ad98 ("Docs: dt: add generic MSI bindings"). However, the legacy definition is completely compatible with the current definition and, since of_phandle_iterator_next() tolerates missing and present-but- zero *cells properties since commit e42ee61017f5 ("of: Let of_for_each_phandle fallback to non-negative cell_count"), there's no need anymore to special case the legacy definition in of_msi_get_domain(). Indeed, special casing has turned out to be harmful, because, as of commit 7c025238b47a ("dt-bindings: irqchip: Describe the IMX MU block as a MSI controller"), MSI controller DT bindings have started specifying '#msi-cells' as a required property (even when the value must be zero) as an effort to make the bindings more explicit. But, since the special casing of 'msi-parent' only uses the existence of '#msi-cells' for its heuristic, and not whether or not it's also nonzero, the legacy path is not taken. Furthermore, the path to support the new, broader definition isn't taken either since that path has been restricted to the platform-msi bus. But, neither the definition of 'msi-parent' nor the definition of '#msi-cells' is platform-msi-specific (the platform-msi bus was just the first bus that needed '#msi-cells'), so remove both the special casing and the restriction. The code removal also requires changing to of_parse_phandle_with_optional_args() in order to ensure the legacy (but compatible) use of 'msi-parent' remains supported. This not only simplifies the code but also resolves an issue with PCI devices finding their MSI controllers on riscv, as the riscv,imsics binding requires '#msi-cells=<0>'. Signed-off-by: Andrew Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kamlesh Gurudasani <[email protected]> Date: Thu Aug 22 02:32:52 2024 +0530 padata: Honor the caller's alignment in case of chunk_size 0 [ Upstream commit 24cc57d8faaa4060fd58adf810b858fcfb71a02f ] In the case where we are forcing the ps.chunk_size to be at least 1, we are ignoring the caller's alignment. Move the forcing of ps.chunk_size to be at least 1 before rounding it up to caller's alignment, so that caller's alignment is honored. While at it, use max() to force the ps.chunk_size to be at least 1 to improve readability. Fixes: 6d45e1c948a8 ("padata: Fix possible divide-by-0 panic in padata_mt_helper()") Signed-off-by: Kamlesh Gurudasani <[email protected]> Acked-by: Waiman Long <[email protected]> Acked-by: Daniel Jordan <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: VanGiang Nguyen <[email protected]> Date: Fri Aug 9 06:21:42 2024 +0000 padata: use integer wrap around to prevent deadlock on seq_nr overflow commit 9a22b2812393d93d84358a760c347c21939029a6 upstream. When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow. Fixes: bfde23ce200e ("padata: unbind parallel jobs from specific CPUs") Cc: <[email protected]> Co-developed-by: Christian Gafert <[email protected]> Signed-off-by: Christian Gafert <[email protected]> Co-developed-by: Max Ferger <[email protected]> Signed-off-by: Max Ferger <[email protected]> Signed-off-by: Van Giang Nguyen <[email protected]> Acked-by: Daniel Jordan <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Sun Sep 8 00:40:38 2024 +0200 parisc: Fix 64-bit userspace syscall path commit d24449864da5838936669618356b0e30ca2999c3 upstream. Currently the glibc isn't yet ported to 64-bit for hppa, so there is no usable userspace available yet. But it's possible to manually build a static 64-bit binary and run that for testing. One such 64-bit test program is available at http://ftp.parisc-linux.org/src/64bit.tar.gz and it shows various issues with the existing 64-bit syscall path in the kernel. This patch fixes those issues. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # v4.19+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Tue Sep 10 18:32:24 2024 +0200 parisc: Fix itlb miss handler for 64-bit programs commit 9542130937e9dc707dd7c6b7af73326437da2d50 upstream. For an itlb miss when executing code above 4 Gb on ILP64 adjust the iasq/iaoq in the same way isr/ior was adjusted. This fixes signal delivery for the 64-bit static test program from http://ftp.parisc-linux.org/src/64bit.tar.gz. Note that signals are handled by the signal trampoline code in the 64-bit VDSO which is mapped into high userspace memory region above 4GB for 64-bit processes. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # v4.19+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Sat Sep 7 18:28:11 2024 +0200 parisc: Fix stack start for ADDR_NO_RANDOMIZE personality commit f31b256994acec6929306dfa86ac29716e7503d6 upstream. Fix the stack start address calculation for the parisc architecture in setup_arg_pages() when address randomization is disabled. When the ADDR_NO_RANDOMIZE process personality is disabled there is no need to add additional space for the stack. Note that this patch touches code inside an #ifdef CONFIG_STACK_GROWSUP hunk, which is why only the parisc architecture is affected since it's the only Linux architecture where the stack grows upwards. Without this patch you will find the stack in the middle of some mapped libaries and suddenly limited to 6MB instead of 8MB: root@parisc:~# setarch -R /bin/bash -c "cat /proc/self/maps" 00010000-00019000 r-xp 00000000 08:05 1182034 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:05 1182034 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] f90c4000-f9283000 r-xp 00000000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f9283000-f9285000 r--p 001bf000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f9285000-f928a000 rwxp 001c1000 08:05 1573004 /usr/lib/hppa-linux-gnu/libc.so.6 f928a000-f9294000 rwxp 00000000 00:00 0 f9301000-f9323000 rwxp 00000000 00:00 0 [stack] f98b4000-f98e4000 r-xp 00000000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f98e4000-f98e5000 r--p 00030000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f98e5000-f98e9000 rwxp 00031000 08:05 1572869 /usr/lib/hppa-linux-gnu/ld.so.1 f9ad8000-f9b00000 rw-p 00000000 00:00 0 f9b00000-f9b01000 r-xp 00000000 00:00 0 [vdso] With the patch the stack gets correctly mapped at the end of the process memory map: root@panama:~# setarch -R /bin/bash -c "cat /proc/self/maps" 00010000-00019000 r-xp 00000000 08:13 16385582 /usr/bin/cat 00019000-0001a000 rwxp 00009000 08:13 16385582 /usr/bin/cat 0001a000-0003b000 rwxp 00000000 00:00 0 [heap] fef29000-ff0eb000 r-xp 00000000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0eb000-ff0ed000 r--p 001c2000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0ed000-ff0f2000 rwxp 001c4000 08:13 16122400 /usr/lib/hppa-linux-gnu/libc.so.6 ff0f2000-ff0fc000 rwxp 00000000 00:00 0 ff4b4000-ff4e4000 r-xp 00000000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff4e4000-ff4e6000 r--p 00030000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff4e6000-ff4ea000 rwxp 00032000 08:13 16121913 /usr/lib/hppa-linux-gnu/ld.so.1 ff6d7000-ff6ff000 rw-p 00000000 00:00 0 ff6ff000-ff700000 r-xp 00000000 00:00 0 [vdso] ff700000-ff722000 rwxp 00000000 00:00 0 [stack] Reported-by: Camm Maguire <[email protected]> Signed-off-by: Helge Deller <[email protected]> Fixes: d045c77c1a69 ("parisc,metag: Fix crashes due to stack randomization on stack-grows-upwards architectures") Fixes: 17d9822d4b4c ("parisc: Consider stack randomization for mmap base only when necessary") Cc: [email protected] # v5.2+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Subramanian Ananthanarayanan <[email protected]> Date: Fri Sep 6 10:52:27 2024 +0530 PCI: Add ACS quirk for Qualcomm SA8775P [ Upstream commit 026f84d3fa62d215b11cbeb5a5d97df941e93b5c ] The Qualcomm SA8775P root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. Thus, add an ACS quirk for the SA8775P. Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Subramanian Ananthanarayanan <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: WangYuli <[email protected]> Date: Fri Aug 23 17:57:08 2024 +0800 PCI: Add function 0 DMA alias quirk for Glenfly Arise chip [ Upstream commit 9246b487ab3c3b5993aae7552b7a4c541cc14a49 ] Add DMA support for audio function of Glenfly Arise chip, which uses Requester ID of function 0. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: SiyuLi <[email protected]> Signed-off-by: WangYuli <[email protected]> [bhelgaas: lower-case hex to match local code, drop unused Device IDs] Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Fri Jul 19 18:53:26 2024 -0500 PCI: keystone: Fix if-statement expression in ks_pcie_quirk() [ Upstream commit 6188a1c762eb9bbd444f47696eda77a5eae6207a ] This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)") Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Dan Carpenter <[email protected]> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Siddharth Vadapalli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Williamson <[email protected]> Date: Thu Sep 12 15:53:27 2024 -0600 PCI: Mark Creative Labs EMU20k2 INTx masking as broken [ Upstream commit 2910306655a7072640021563ec9501bfa67f0cb1 ] Per user reports, the Creative Labs EMU20k2 (Sound Blaster X-Fi Titanium Series) generates spurious interrupts when used with vfio-pci unless DisINTx masking support is disabled. Thus, quirk the device to mark INTx masking as broken. Closes: https://lore.kernel.org/all/VI1PR10MB8207C507DB5420AB4C7281E0DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM Link: https://lore.kernel.org/linux-pci/[email protected] Reported-by: zdravko delineshev <[email protected]> Signed-off-by: Alex Williamson <[email protected]> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sean Anderson <[email protected]> Date: Fri May 31 12:13:32 2024 -0400 PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler [ Upstream commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 ] MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Sean Anderson <[email protected]> Date: Fri May 31 12:13:33 2024 -0400 PCI: xilinx-nwl: Fix register misspelling [ Upstream commit a437027ae1730b8dc379c75fa0dd7d3036917400 ] MSIC -> MISC Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Anderson <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Gleixner <[email protected]> Date: Thu Dec 10 20:25:54 2020 +0100 PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() [ Upstream commit e56427068a8d796bb7b8e297f2b6e947380e383f ] Going through a full irq descriptor lookup instead of just using the proper helper function which provides direct access is suboptimal. In fact it _is_ wrong because the chip callback needs to get the chip data which is relevant for the chip while using the irq descriptor variant returns the irq chip data of the top level chip of a hierarchy. It does not matter in this case because the chip is the top level chip, but that doesn't make it more correct. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: 0199d2f2bd8c ("PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler") Signed-off-by: Sasha Levin <[email protected]>
Author: Yang Jihong <[email protected]> Date: Tue Aug 6 10:35:33 2024 +0800 perf sched timehist: Fix missing free of session in perf_sched__timehist() [ Upstream commit 6bdf5168b6fb19541b0c1862bdaa596d116c7bfb ] When perf_time__parse_str() fails in perf_sched__timehist(), need to free session that was previously created, fix it. Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yang Jihong <[email protected]> Date: Mon Aug 19 10:47:20 2024 +0800 perf sched timehist: Fixed timestamp error when unable to confirm event sched_in time [ Upstream commit 39c243411bdb8fb35777adf49ee32549633c4e12 ] If sched_in event for current task is not recorded, sched_in timestamp will be set to end_time of time window interest, causing an error in timestamp show. In this case, we choose to ignore this event. Test scenario: perf[1229608] does not record the first sched_in event, run time and sch delay are both 0 # perf sched timehist Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000 2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003 2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000 2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004 2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000 2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007 2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000 2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004 Before: arbitrarily specify a time window of interest, timestamp will be set to an incorrect value # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- 200.000000 [0000] perf[1229608] 0.000 0.000 0.000 200.000000 [0001] perf[1229608] 0.000 0.000 0.000 200.000000 [0002] perf[1229608] 0.000 0.000 0.000 200.000000 [0003] perf[1229608] 0.000 0.000 0.000 200.000000 [0004] perf[1229608] 0.000 0.000 0.000 200.000000 [0005] perf[1229608] 0.000 0.000 0.000 200.000000 [0006] perf[1229608] 0.000 0.000 0.000 200.000000 [0007] perf[1229608] 0.000 0.000 0.000 After: # perf sched timehist --time 100,200 Samples of sched_switch event do not have callchains. time cpu task name wait time sch delay run time [tid/pid] (msec) (msec) (msec) --------------- ------ ------------------------------ --------- --------- --------- Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest") Signed-off-by: Yang Jihong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ian Rogers <[email protected]> Date: Sat Aug 31 00:04:11 2024 -0700 perf time-utils: Fix 32-bit nsec parsing [ Upstream commit 38e2648a81204c9fc5b4c87a8ffce93a6ed91b65 ] The "time utils" test fails in 32-bit builds: ... parse_nsec_time("18446744073.709551615") Failed. ptime 4294967295709551615 expected 18446744073709551615 ... Switch strtoul to strtoull as an unsigned long in 32-bit build isn't 64-bits. Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Chaitanya S Prakash <[email protected]> Cc: Colin Ian King <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominique Martinet <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Junhao He <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yang Jihong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luo Gengkun <[email protected]> Date: Sat Aug 31 07:43:15 2024 +0000 perf/core: Fix small negative period being ignored commit 62c0b1061593d7012292f781f11145b2d46f43ab upstream. In perf_adjust_period, we will first calculate period, and then use this period to calculate delta. However, when delta is less than 0, there will be a deviation compared to when delta is greater than or equal to 0. For example, when delta is in the range of [-14,-1], the range of delta = delta + 7 is between [-7,6], so the final value of delta/8 is 0. Therefore, the impact of -1 and -2 will be ignored. This is unacceptable when the target period is very short, because we will lose a lot of samples. Here are some tests and analyzes: before: # perf record -e cs -F 1000 ./a.out [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.022 MB perf.data (518 samples) ] # perf script ... a.out 396 257.956048: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.957891: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.959730: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.961545: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.963355: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.965163: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.966973: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.968785: 23 cs: ffffffff81f4eeec schedul> a.out 396 257.970593: 23 cs: ffffffff81f4eeec schedul> ... after: # perf record -e cs -F 1000 ./a.out [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.058 MB perf.data (1466 samples) ] # perf script ... a.out 395 59.338813: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.339707: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.340682: 13 cs: ffffffff81f4eeec schedul> a.out 395 59.341751: 13 cs: ffffffff81f4eeec schedul> a.out 395 59.342799: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.343765: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.344651: 11 cs: ffffffff81f4eeec schedul> a.out 395 59.345539: 12 cs: ffffffff81f4eeec schedul> a.out 395 59.346502: 13 cs: ffffffff81f4eeec schedul> ... test.c int main() { for (int i = 0; i < 20000; i++) usleep(10); return 0; } # time ./a.out real 0m1.583s user 0m0.040s sys 0m0.298s The above results were tested on x86-64 qemu with KVM enabled using test.c as test program. Ideally, we should have around 1500 samples, but the previous algorithm had only about 500, whereas the modified algorithm now has about 1400. Further more, the new version shows 1 sample per 0.001s, while the previous one is 1 sample per 0.002s.This indicates that the new algorithm is more sensitive to small negative values compared to old algorithm. Fixes: bd2b5b12849a ("perf_counter: More aggressive frequency adjustment") Signed-off-by: Luo Gengkun <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Adrian Hunter <[email protected]> Reviewed-by: Kan Liang <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Adrian Hunter <[email protected]> Date: Mon Jul 15 19:07:00 2024 +0300 perf/x86/intel/pt: Fix sampling synchronization commit d92792a4b26e50b96ab734cbe203d8a4c932a7a9 upstream. pt_event_snapshot_aux() uses pt->handle_nmi to determine if tracing needs to be stopped, however tracing can still be going because pt->handle_nmi is set to zero before tracing is stopped in pt_event_stop, whereas pt_event_snapshot_aux() requires that tracing must be stopped in order to copy a sample of trace from the buffer. Instead call pt_config_stop() always, which anyway checks config for RTIT_CTL_TRACEEN and does nothing if it is already clear. Note pt_event_snapshot_aux() can continue to use pt->handle_nmi to determine if the trace needs to be restarted afterwards. Fixes: 25e8920b301c ("perf/x86/intel/pt: Add sampling support") Signed-off-by: Adrian Hunter <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Blocher <[email protected]> Date: Wed Jul 31 01:16:26 2024 +0200 pinctrl: at91: make it work with current gpiolib [ Upstream commit 752f387faaae0ae2e84d3f496922524785e77d60 ] pinctrl-at91 currently does not support the gpio-groups devicetree property and has no pin-range. Because of this at91 gpios stopped working since patch commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges") This was discussed in the patches commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)") commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") As a workaround manually set pin-range via gpiochip_add_pin_range() until a) pinctrl-at91 is reworked to support devicetree gpio-groups b) another solution as mentioned in commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") is found Signed-off-by: Thomas Blocher <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wang Jianzheng <[email protected]> Date: Thu Aug 29 14:48:23 2024 +0800 pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function [ Upstream commit c25478419f6fd3f74c324a21ec007cf14f2688d7 ] When an error occurs during the execution of the function __devinit_dove_pinctrl_probe, the clk is not properly disabled. Fix this by calling clk_disable_unprepare before return. Fixes: ba607b6238a1 ("pinctrl: mvebu: make pdma clock on dove mandatory") Signed-off-by: Wang Jianzheng <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yangtao Li <[email protected]> Date: Tue Jul 4 20:47:40 2023 +0800 pinctrl: mvebu: Use devm_platform_get_and_ioremap_resource() [ Upstream commit 2d357f25663ddfef47ffe26da21155302153d168 ] Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Stable-dep-of: c25478419f6f ("pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function") Signed-off-by: Sasha Levin <[email protected]>
Author: Yang Yingliang <[email protected]> Date: Mon Aug 19 10:46:25 2024 +0800 pinctrl: single: fix missing error code in pcs_probe() [ Upstream commit cacd8cf79d7823b07619865e994a7916fcc8ae91 ] If pinctrl_enable() fails in pcs_probe(), it should return the error code. Fixes: 8f773bfbdd42 ("pinctrl: single: fix possible memory leak when pinctrl_enable() fails") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ckath <[email protected]> Date: Wed Sep 11 21:12:40 2024 +0200 platform/x86: touchscreen_dmi: add nanote-next quirk [ Upstream commit c11619af35bae5884029bd14170c3e4b55ddf6f3 ] Add touschscreen info for the nanote next (UMPC-03-SR). After checking with multiple owners the DMI info really is this generic. Signed-off-by: Ckath <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrew Davis <[email protected]> Date: Mon Jun 10 09:28:36 2024 -0500 power: reset: brcmstb: Do not go into infinite loop if reset fails [ Upstream commit cf8c39b00e982fa506b16f9d76657838c09150cb ] There may be other backup reset methods available, do not halt here so that other reset methods can be tried. Signed-off-by: Andrew Davis <[email protected]> Reviewed-by: Dhruva Gole <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hermann Lauer <[email protected]> Date: Wed May 12 12:58:56 2021 +0200 power: supply: axp20x_battery: allow disabling battery charging [ Upstream commit 6a0fcc87c9e35191d37a8819fdab9d30e523515b ] Allow disabling and re-enabling battery charging of an axp209 PMIC through a writable status property. With the current driver code charging is always on. This works on the axp209 of Banana {Pi M1+,Pro} and should work on all AXP chips. Signed-off-by: [email protected] Signed-off-by: Sebastian Reichel <[email protected]> Stable-dep-of: 61978807b00f ("power: supply: axp20x_battery: Remove design from min and max voltage") Signed-off-by: Sasha Levin <[email protected]>
Author: Chris Morgan <[email protected]> Date: Wed Aug 21 16:54:43 2024 -0500 power: supply: axp20x_battery: Remove design from min and max voltage [ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ] The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable properties of the battery, but for this driver they are writable values and used as the minimum and maximum values for charging. Remove the DESIGN designation from these values. Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs") Suggested-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Chris Morgan <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Artur Weber <[email protected]> Date: Sat Aug 17 12:51:14 2024 +0200 power: supply: max17042_battery: Fix SOC threshold calc w/ no current sense [ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ] Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for capacity when no rsns") made it so that capacity on systems without current sensing would be read from VFSOC instead of RepSOC. However, the SOC threshold calculation still read RepSOC to get the SOC regardless of the current sensing option state. Fix this by applying the same conditional to determine which register should be read. This also seems to be the intended behavior as per the datasheet - SOC alert config value in MiscCFG on setups without current sensing is set to a value of 0b11, indicating SOC alerts being generated based on VFSOC, instead of 0b00 which indicates SOC alerts being generated based on RepSOC. This fixes an issue on the Galaxy S3/Midas boards, where the alert interrupt would be constantly retriggered, causing high CPU usage on idle (around ~12%-15%). Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC") Signed-off-by: Artur Weber <[email protected]> Reviewed-by: Henrik Grimler <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sumeet Pawnikar <[email protected]> Date: Thu Jun 8 08:00:06 2023 +0530 powercap: RAPL: fix invalid initialization for pl4_supported field commit d05b5e0baf424c8c4b4709ac11f66ab726c8deaf upstream. The current initialization of the struct x86_cpu_id via pl4_support_ids[] is partial and wrong. It is initializing "stepping" field with "X86_FEATURE_ANY" instead of "feature" field. Use X86_MATCH_INTEL_FAM6_MODEL macro instead of initializing each field of the struct x86_cpu_id for pl4_supported list of CPUs. This X86_MATCH_INTEL_FAM6_MODEL macro internally uses another macro X86_MATCH_VENDOR_FAM_MODEL_FEATURE for X86 based CPU matching with appropriate initialized values. Reported-by: Dave Hansen <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Fixes: eb52bc2ae5b8 ("powercap: RAPL: Add Power Limit4 support for Meteor Lake SoC") Fixes: b08b95cf30f5 ("powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P") Fixes: 515755906921 ("powercap: RAPL: Add Power Limit4 support for RaptorLake") Fixes: 1cc5b9a411e4 ("powercap: Add Power Limit4 support for Alder Lake SoC") Fixes: 8365a898fe53 ("powercap: Add Power Limit4 support") Signed-off-by: Sumeet Pawnikar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> [ Ricardo: I only kept TIGERLAKE in pl4_support_ids as only this model is enumerated before this changeset. ] Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Thu Aug 8 09:05:08 2024 +0200 powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL [ Upstream commit e7e846dc6c73fbc94ae8b4ec20d05627646416f2 ] Booting with CONFIG_DEBUG_VIRTUAL leads to following warning when passing hugepage reservation on command line: Kernel command line: hugepagesz=1g hugepages=1 hugepagesz=64m hugepages=1 hugepagesz=256m hugepages=1 noreboot HugeTLB: allocating 1 of page size 1.00 GiB failed. Only allocated 0 hugepages. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/include/asm/io.h:948 __alloc_bootmem_huge_page+0xd4/0x284 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.10.0-rc6-00396-g6b0e82791bd0-dirty #936 Hardware name: MPC8544DS e500v2 0x80210030 MPC8544 DS NIP: c1020240 LR: c10201d0 CTR: 00000000 REGS: c13fdd30 TRAP: 0700 Not tainted (6.10.0-rc6-00396-g6b0e82791bd0-dirty) MSR: 00021000 <CE,ME> CR: 44084288 XER: 20000000 GPR00: c10201d0 c13fde20 c130b560 e8000000 e8001000 00000000 00000000 c1420000 GPR08: 00000000 00028001 00000000 00000004 44084282 01066ac0 c0eb7c9c efffe149 GPR16: c0fc4228 0000005f ffffffff c0eb7d0c c0eb7cc0 c0eb7ce0 ffffffff 00000000 GPR24: c1441cec efffe153 e8001000 c14240c0 00000000 c1441d64 00000000 e8000000 NIP [c1020240] __alloc_bootmem_huge_page+0xd4/0x284 LR [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 Call Trace: [c13fde20] [c10201d0] __alloc_bootmem_huge_page+0x64/0x284 (unreliable) [c13fde50] [c10207b8] hugetlb_hstate_alloc_pages+0x8c/0x3e8 [c13fdeb0] [c1021384] hugepages_setup+0x240/0x2cc [c13fdef0] [c1000574] unknown_bootoption+0xfc/0x280 [c13fdf30] [c0078904] parse_args+0x200/0x4c4 [c13fdfa0] [c1000d9c] start_kernel+0x238/0x7d0 [c13fdff0] [c0000434] set_ivor+0x12c/0x168 Code: 554aa33e 7c042840 3ce0c142 80a7427c 5109a016 50caa016 7c9a2378 7fdcf378 4180000c 7c052040 41810160 7c095040 <0fe00000> 38c00000 40800108 3c60c0eb ---[ end trace 0000000000000000 ]--- This is due to virt_addr_valid() using high_memory before it is set. high_memory is set in mem_init() using max_low_pfn, but max_low_pfn is available long before, it is set in mem_topology_setup(). So just like commit daa9ada2093e ("powerpc/mm: Fix boot crash with FLATMEM") moved the setting of max_mapnr immediately after the call to mem_topology_setup(), the same can be done for high_memory. Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/62b69c4baad067093f39e7e60df0fe27a86b8d2a.1723100702.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Wed Oct 9 18:58:02 2024 +0000 ppp: fix ppp_async_encode() illegal access [ Upstream commit 40dddd4b8bd08a69471efd96107a4e1c73fabefc ] syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ma Ke <[email protected]> Date: Wed Aug 28 21:18:14 2024 +0800 pps: add an error check in parport_attach [ Upstream commit 62c5a01a5711c8e4be8ae7b6f0db663094615d48 ] In parport_attach, the return value of ida_alloc is unchecked, witch leads to the use of an invalid index value. To address this issue, index should be checked. When the index value is abnormal, the device should be freed. Found by code review, compile tested only. Cc: [email protected] Fixes: fb56d97df70e ("pps: client: use new parport device model") Signed-off-by: Ma Ke <[email protected]> Acked-by: Rodolfo Giometti <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Sun Apr 14 12:10:17 2024 +0200 pps: remove usage of the deprecated ida_simple_xx() API [ Upstream commit 55dbc5b5174d0e7d1fa397d05aa4cb145e8b887e ] ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Link: https://lkml.kernel.org/r/9f681747d446b874952a892491387d79ffe565a9.1713089394.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <[email protected]> Cc: Rodolfo Giometti <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Stable-dep-of: 62c5a01a5711 ("pps: add an error check in parport_attach") Signed-off-by: Sasha Levin <[email protected]>
Author: Adrian Ratiu <[email protected]> Date: Fri Aug 2 11:02:25 2024 +0300 proc: add config & param to block forcing mem writes [ Upstream commit 41e8149c8892ed1962bd15350b3c3e6e90cba7f4 ] This adds a Kconfig option and boot param to allow removing the FOLL_FORCE flag from /proc/pid/mem write calls because it can be abused. The traditional forcing behavior is kept as default because it can break GDB and some other use cases. Previously we tried a more sophisticated approach allowing distributions to fine-tune /proc/pid/mem behavior, however that got NAK-ed by Linus [1], who prefers this simpler approach with semantics also easier to understand for users. Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1] Cc: Doug Anderson <[email protected]> Cc: Jeff Xu <[email protected]> Cc: Jann Horn <[email protected]> Cc: Kees Cook <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Christian Brauner <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Adrian Ratiu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiner Kallweit <[email protected]> Date: Tue Sep 17 23:04:46 2024 +0200 r8169: add tally counter fields added with RTL8125 [ Upstream commit ced8e8b8f40accfcce4a2bbd8b150aa76d5eff9a ] RTL8125 added fields to the tally counter, what may result in the chip dma'ing these new fields to unallocated memory. Therefore make sure that the allocated memory area is big enough to hold all of the tally counter values, even if we use only parts of it. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiner Kallweit <[email protected]> Date: Wed Sep 11 15:51:11 2024 +0200 r8169: disable ALDPS per default for RTL8125 [ Upstream commit b9c7ac4fe22c608acf6153a3329df2b6b6cd416c ] En-Wei reported that traffic breaks if cable is unplugged for more than 3s and then re-plugged. This was supposed to be fixed by 621735f59064 ("r8169: fix rare issue with broken rx after link-down on RTL8125"). But apparently this didn't fix the issue for everybody. The 3s threshold rang a bell, as this is the delay after which ALDPS kicks in. And indeed disabling ALDPS fixes the issue for this user. Maybe this fixes the issue in general. In a follow-up step we could remove the first fix attempt and see whether anybody complains. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Tested-by: En-Wei WU <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Colin Ian King <[email protected]> Date: Mon Sep 9 15:00:21 2024 +0100 r8169: Fix spelling mistake: "tx_underun" -> "tx_underrun" [ Upstream commit 8df9439389a44fb2cc4ef695e08d6a8870b1616c ] There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Heiner Kallweit <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: ced8e8b8f40a ("r8169: add tally counter fields added with RTL8125") Signed-off-by: Sasha Levin <[email protected]>
Author: Paul E. McKenney <[email protected]> Date: Thu Aug 1 17:43:03 2024 -0700 rcuscale: Provide clear error when async specified without primitives [ Upstream commit 11377947b5861fa59bf77c827e1dd7c081842cc9 ] Currently, if the rcuscale module's async module parameter is specified for RCU implementations that do not have async primitives such as RCU Tasks Rude (which now lacks a call_rcu_tasks_rude() function), there will be a series of splats due to calls to a NULL pointer. This commit therefore warns of this situation, but switches to non-async testing. Signed-off-by: "Paul E. McKenney" <[email protected]> Signed-off-by: Neeraj Upadhyay <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mikhail Lobanov <[email protected]> Date: Thu Sep 12 10:58:39 2024 -0400 RDMA/cxgb4: Added NULL check for lookup_atid [ Upstream commit e766e6a92410ca269161de059fff0843b8ddd65f ] The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC") Signed-off-by: Mikhail Lobanov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xi Wang <[email protected]> Date: Fri Feb 5 17:39:25 2021 +0800 RDMA/hns: Add mapped page count checking for MTR [ Upstream commit 9ea9a53ea93be1cc66729ceb920f0d07285d6bfd ] Add the mapped page count checking flow to avoid invalid page size when creating MTR. Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xi Wang <[email protected]> Signed-off-by: Weihang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Stable-dep-of: d586628b169d ("RDMA/hns: Fix the overflow risk of hem_list_calc_ba_range()") Signed-off-by: Sasha Levin <[email protected]>
Author: Chengchang Tang <[email protected]> Date: Fri Sep 6 17:34:40 2024 +0800 RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled [ Upstream commit 74d315b5af180220d561684d15897730135733a6 ] Fix missuse of spin_lock_irq()/spin_unlock_irq() when spin_lock_irqsave()/spin_lock_irqrestore() was hold. This was discovered through the lock debugging, and the corresponding log is as follows: raw_local_irq_restore() called with IRQs enabled WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40 ... Call trace: warn_bogus_irq_restore+0x30/0x40 _raw_spin_unlock_irqrestore+0x84/0xc8 add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2] hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2] hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2] create_qp+0x138/0x258 ib_create_qp_kernel+0x50/0xe8 create_mad_qp+0xa8/0x128 ib_mad_port_open+0x218/0x448 ib_mad_init_device+0x70/0x1f8 add_client_context+0xfc/0x220 enable_device_and_get+0xd0/0x140 ib_register_device.part.0+0xf4/0x1c8 ib_register_device+0x34/0x50 hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2] hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2] __hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2] hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2] Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Chengchang Tang <[email protected]> Signed-off-by: Junxian Huang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: wenglianfa <[email protected]> Date: Fri Sep 6 17:34:39 2024 +0800 RDMA/hns: Fix the overflow risk of hem_list_calc_ba_range() [ Upstream commit d586628b169d14bbf36be64d2b3ec9d9d2fe0432 ] The max value of 'unit' and 'hop_num' is 2^24 and 2, so the value of 'step' may exceed the range of u32. Change the type of 'step' to u64. Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Signed-off-by: wenglianfa <[email protected]> Signed-off-by: Junxian Huang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yixing Liu <[email protected]> Date: Fri Jun 18 18:10:12 2021 +0800 RDMA/hns: Fix uninitialized variable commit 2a38c0f10e6d7d28e06ff1eb1f350804c4850275 upstream. A random value will be returned if the condition below is not met, so it needs to be initialized. Fixes: 9ea9a53ea93b ("RDMA/hns: Add mapped page count checking for MTR") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yixing Liu <[email protected]> Signed-off-by: Weihang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Junxian Huang <[email protected]> Date: Fri Sep 6 17:34:43 2024 +0800 RDMA/hns: Optimize hem allocation performance [ Upstream commit fe51f6254d81f5a69c31df16353d6539b2b51630 ] When allocating MTT hem, for each hop level of each hem that is being allocated, the driver iterates the hem list to find out whether the bt page has been allocated in this hop level. If not, allocate a new one and splice it to the list. The time complexity is O(n^2) in worst cases. Currently the allocation for-loop uses 'unit' as the step size. This actually has taken into account the reuse of last-hop-level MTT bt pages by multiple buffer pages. Thus pages of last hop level will never have been allocated, so there is no need to iterate the hem list in last hop level. Removing this unnecessary iteration can reduce the time complexity to O(n). Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing") Signed-off-by: Junxian Huang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xi Wang <[email protected]> Date: Fri May 21 17:29:52 2021 +0800 RDMA/hns: Refactor root BT allocation for MTR [ Upstream commit 1f704d8cc07269f31daf9bdafe84882ad7596a2c ] Split the hem_list_alloc_root_bt() into serval small functions to make the code flow more clear. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Xi Wang <[email protected]> Signed-off-by: Weihang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Stable-dep-of: d586628b169d ("RDMA/hns: Fix the overflow risk of hem_list_calc_ba_range()") Signed-off-by: Sasha Levin <[email protected]>
Author: Zhu Yanjun <[email protected]> Date: Tue Aug 20 13:33:36 2024 +0200 RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency [ Upstream commit 86dfdd8288907f03c18b7fb462e0e232c4f98d89 ] In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs"), the function flush_workqueue is invoked to flush the work queue iwcm_wq. But at that time, the work queue iwcm_wq was created via the function alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM. Because the current process is trying to flush the whole iwcm_wq, if iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current process is not reclaiming memory or running on a workqueue which doesn't have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee leading to a deadlock. The call trace is as below: [ 125.350876][ T1430] Call Trace: [ 125.356281][ T1430] <TASK> [ 125.361285][ T1430] ? __warn (kernel/panic.c:693) [ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239) [ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9)) [ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970) [ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151) [ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm [ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910) [ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161) [ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm [ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma [ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma [ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231) [ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393) [ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339) [ 125.531837][ T1430] kthread (kernel/kthread.c:389) [ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147) [ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342) [ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257) [ 125.566487][ T1430] </TASK> [ 125.566488][ T1430] ---[ end trace 0000000000000000 ]--- Fixes: aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") Link: https://patch.msgid.link/r/[email protected] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Tested-by: kernel test robot <[email protected]> Signed-off-by: Zhu Yanjun <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Saravanan Vajravel <[email protected]> Date: Mon Jul 22 16:33:25 2024 +0530 RDMA/mad: Improve handling of timed out WRs of mad agent [ Upstream commit 2a777679b8ccd09a9a65ea0716ef10365179caac ] Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs Signed-off-by: Saravanan Vajravel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bob Pearson <[email protected]> Date: Fri Mar 29 09:55:04 2024 -0500 RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt commit 2b23b6097303ed0ba5f4bc036a1c07b6027af5c6 upstream. In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bob Pearson <[email protected]> Fixes: 0b1e5b99a48b ("IB/rxe: Add port protocol stats") Signed-off-by: Jason Gunthorpe <[email protected]> [Sherry: bp to fix CVE-2024-38544. Fix conflict due to missing commit: dccb23f6c312 ("RDMA/rxe: Split rxe_run_task() into two subroutines") which is not necessary to backport] Signed-off-by: Sherry Yang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Laurent Pinchart <[email protected]> Date: Mon Jul 29 18:57:38 2024 +0300 Remove *.orig pattern from .gitignore commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream. Commit 3f1b0e1f2875 (".gitignore update") added *.orig and *.rej patterns to .gitignore in v2.6.23. The commit message didn't give a rationale. Later on, commit 1f5d3a6b6532 ("Remove *.rej pattern from .gitignore") removed the *.rej pattern in v2.6.26, on the rationale that *.rej files indicated something went really wrong and should not be ignored. The *.rej files are now shown by `git status`, which helps located conflicts when applying patches and lowers the probability that they will go unnoticed. It is however still easy to overlook the *.orig files which slowly polute the source tree. That's not as big of a deal as not noticing a conflict, but it's still not nice. Drop the *.orig pattern from .gitignore to avoid this and help keep the source tree clean. Signed-off-by: Laurent Pinchart <[email protected]> [[email protected]: I do not have a strong opinion about this. Perhaps some people may have a different opinion. If you are someone who wants to ignore *.orig, it is likely you would want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore would be more suitable for your needs. gitignore(5) suggests, "Patterns which a user wants Git to ignore in all situations generally go into a file specified by core.excludesFile in the user's ~/.gitconfig". Please note that you cannot do the opposite; if *.orig is ignored by the project's .gitignore, you cannot override the decision because $XDG_CONFIG_HOME/git/ignore has a lower priority. If *.orig is sitting on the fence, I'd leave it to the users. ] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Aug 25 16:14:24 2024 +0200 reset: berlin: fix OF node leak in probe() error path [ Upstream commit 5f58a88cc91075be38cec69b7cb70aaa4ba69e8b ] Driver is leaking OF node reference on memory allocation failure. Acquire the OF node reference after memory allocation to fix this and keep it simple. Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Huang Ying <[email protected]> Date: Thu Oct 10 13:33:38 2024 +0800 resource: fix region_intersects() vs add_memory_driver_managed() commit b4afe4183ec77f230851ea139d91e5cf2644c68b upstream. On a system with CXL memory, the resource tree (/proc/iomem) related to CXL memory may look like something as follows. 490000000-50fffffff : CXL Window 0 490000000-50fffffff : region0 490000000-50fffffff : dax0.0 490000000-50fffffff : System RAM (kmem) Because drivers/dax/kmem.c calls add_memory_driver_managed() during onlining CXL memory, which makes "System RAM (kmem)" a descendant of "CXL Window X". This confuses region_intersects(), which expects all "System RAM" resources to be at the top level of iomem_resource. This can lead to bugs. For example, when the following command line is executed to write some memory in CXL memory range via /dev/mem, $ dd if=data of=/dev/mem bs=$((1 << 10)) seek=$((0x490000000 >> 10)) count=1 dd: error writing '/dev/mem': Bad address 1+0 records in 0+0 records out 0 bytes copied, 0.0283507 s, 0.0 kB/s the command fails as expected. However, the error code is wrong. It should be "Operation not permitted" instead of "Bad address". More seriously, the /dev/mem permission checking in devmem_is_allowed() passes incorrectly. Although the accessing is prevented later because ioremap() isn't allowed to map system RAM, it is a potential security issue. During command executing, the following warning is reported in the kernel log for calling ioremap() on system RAM. ioremap on RAM at 0x0000000490000000 - 0x0000000490000fff WARNING: CPU: 2 PID: 416 at arch/x86/mm/ioremap.c:216 __ioremap_caller.constprop.0+0x131/0x35d Call Trace: memremap+0xcb/0x184 xlate_dev_mem_ptr+0x25/0x2f write_mem+0x94/0xfb vfs_write+0x128/0x26d ksys_write+0xac/0xfe do_syscall_64+0x9a/0xfd entry_SYSCALL_64_after_hwframe+0x4b/0x53 The details of command execution process are as follows. In the above resource tree, "System RAM" is a descendant of "CXL Window 0" instead of a top level resource. So, region_intersects() will report no System RAM resources in the CXL memory region incorrectly, because it only checks the top level resources. Consequently, devmem_is_allowed() will return 1 (allow access via /dev/mem) for CXL memory region incorrectly. Fortunately, ioremap() doesn't allow to map System RAM and reject the access. So, region_intersects() needs to be fixed to work correctly with the resource tree with "System RAM" not at top level as above. To fix it, if we found a unmatched resource in the top level, we will continue to search matched resources in its descendant resources. So, we will not miss any matched resources in resource tree anymore. In the new implementation, an example resource tree |------------- "CXL Window 0" ------------| |-- "System RAM" --| will behave similar as the following fake resource tree for region_intersects(, IORESOURCE_SYSTEM_RAM, ), |-- "System RAM" --||-- "CXL Window 0a" --| Where "CXL Window 0a" is part of the original "CXL Window 0" that isn't covered by "System RAM". Link: https://lkml.kernel.org/r/[email protected] Fixes: c221c0b0308f ("device-dax: "Hotplug" persistent memory for use like normal RAM") Signed-off-by: "Huang, Ying" <[email protected]> Cc: Dan Williams <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Dave Jiang <[email protected]> Cc: Alison Schofield <[email protected]> Cc: Vishal Verma <[email protected]> Cc: Ira Weiny <[email protected]> Cc: Alistair Popple <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Baoquan He <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pu Lehui <[email protected]> Date: Fri Sep 27 13:51:17 2024 +0000 Revert "bpf: Eliminate rlimit-based memory accounting for devmap maps" This reverts commit 70294d8bc31f3b7789e5e32f757aa9344556d964 which is commit 844f157f6c0a905d039d2e20212ab3231f2e5eaf upstream. Commit 70294d8bc31f ("bpf: Eliminate rlimit-based memory accounting for devmap maps") is part of the v5.11+ base mechanism of memcg-based memory accounting[0]. The commit cannot be independently backported to the 5.10 stable branch, otherwise the related memory when creating devmap will be unrestricted. Let's roll back to rlimit-based memory accounting mode for devmap. Link: https://lore.kernel.org/bpf/[email protected] [0] Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pu Lehui <[email protected]> Date: Fri Sep 27 13:51:16 2024 +0000 Revert "bpf: Fix DEVMAP_HASH overflow check on 32-bit arches" This reverts commit 225da02acdc97af01b6bc6ce1a3e5362bf01d3fb which is commit 281d464a34f540de166cee74b723e97ac2515ec3 upstream. Commit 225da02acdc9 ("bpf: fix DEVMAP_HASH overflow check on 32-bit architectures") relies on the v5.11+ base mechanism of memcg-based memory accounting[0], which is not yet supported on the 5.10 stable branch, so let's revert this commit in preparation for re-adapting it. Link: https://lore.kernel.org/bpf/[email protected] [0] Signed-off-by: Pu Lehui <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mikulas Patocka <[email protected]> Date: Fri Sep 13 15:05:18 2024 +0200 Revert "dm: requeue IO if mapping table not yet available" [ Upstream commit c8691cd0fc11197515ed148de0780d927bfca38b ] This reverts commit fa247089de9936a46e290d4724cb5f0b845600f5. The following sequence of commands causes a livelock - there will be workqueue process looping and consuming 100% CPU: dmsetup create --notable test truncate -s 1MiB testdata losetup /dev/loop0 testdata dmsetup load test --table '0 2048 linear /dev/loop0 0' dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync The livelock is caused by the commit fa247089de99. The commit claims that it fixes a race condition, however, it is unknown what the actual race condition is and what program is involved in the race condition. When the inactive table is loaded, the nodes /dev/dm-0 and /sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When the device is suspended and resumed, the nodes /dev/mapper/test and /dev/disk/* are created. If some program opens a block device before it is created by dmsetup or lvm, the program is buggy, so dm could just report an error as it used to do before. Reported-by: Zdenek Kabelac <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available") Signed-off-by: Sasha Levin <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Mon Oct 7 11:39:47 2024 +0200 Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" commit 71c717cd8a2e180126932cc6851ff21c1d04d69a upstream. This reverts commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035. This patch leads to passing 0 to simple_read_from_buffer() as a fifth argument, turning the read method into a nop. The change is fundamentally flawed, as it breaks the driver. Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jisheng Zhang <[email protected]> Date: Sat Jul 6 01:02:10 2024 +0800 riscv: define ILLEGAL_POINTER_VALUE for 64bit commit 5c178472af247c7b50f962495bb7462ba453b9fb upstream. This is used in poison.h for poison pointer offset. Based on current SV39, SV48 and SV57 vm layout, 0xdead000000000000 is a proper value that is not mappable, this can avoid potentially turning an oops to an expolit. Signed-off-by: Jisheng Zhang <[email protected]> Fixes: fbe934d69eb7 ("RISC-V: Build Infrastructure") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Mon Jul 8 11:28:46 2024 +0800 riscv: Fix fp alignment bug in perf_callchain_user() [ Upstream commit 22ab08955ea13be04a8efd20cc30890e0afaa49c ] The standard RISC-V calling convention said: "The stack grows downward and the stack pointer is always kept 16-byte aligned". So perf_callchain_user() should check whether 16-byte aligned for fp. Link: https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support") Signed-off-by: Jinjie Ruan <[email protected]> Cc: Björn Töpel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Aug 25 20:31:03 2024 +0200 rtc: at91sam9: fix OF node leak in probe() error path commit 73580e2ee6adfb40276bd420da3bb1abae204e10 upstream. Driver is leaking an OF node reference obtained from of_parse_phandle_with_fixed_args(). Fixes: 43e112bb3dea ("rtc: at91sam9: make use of syscon/regmap to access GPBR registers") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Richter <[email protected]> Date: Wed Jul 10 12:23:47 2024 +0200 s390/cpum_sf: Remove WARN_ON_ONCE statements [ Upstream commit b495e710157606889f2d8bdc62aebf2aa02f67a7 ] Remove WARN_ON_ONCE statements. These have not triggered in the past. Signed-off-by: Thomas Richter <[email protected]> Acked-by: Sumanth Korikkar <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Alexander Gordeev <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiko Carstens <[email protected]> Date: Wed Sep 4 11:39:24 2024 +0200 s390/facility: Disable compile time optimization for decompressor code [ Upstream commit 0147addc4fb72a39448b8873d8acdf3a0f29aa65 ] Disable compile time optimizations of test_facility() for the decompressor. The decompressor should not contain any optimized code depending on the architecture level set the kernel image is compiled for to avoid unexpected operation exceptions. Add a __DECOMPRESSOR check to test_facility() to enforce that facilities are always checked during runtime for the decompressor. Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gerald Schaefer <[email protected]> Date: Mon Sep 2 14:02:19 2024 +0200 s390/mm: Add cond_resched() to cmm_alloc/free_pages() [ Upstream commit 131b8db78558120f58c5dc745ea9655f6b854162 ] Adding/removing large amount of pages at once to/from the CMM balloon can result in rcu_sched stalls or workqueue lockups, because of busy looping w/o cond_resched(). Prevent this by adding a cond_resched(). cmm_free_pages() holds a spin_lock while looping, so it cannot be added directly to the existing loop. Instead, introduce a wrapper function that operates on maximum 256 pages at once, and add it there. Signed-off-by: Gerald Schaefer <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Egorenkov <[email protected]> Date: Fri Feb 26 11:21:05 2021 +0100 s390/zcore: no need to check return value of debugfs_create functions [ Upstream commit 7449ca87312a5b0390b765be65a126e6e5451026 ] When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. See commit 7dd541a3fb34 ("s390: no need to check return value of debugfs_create functions"). Signed-off-by: Alexander Egorenkov <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Stable-dep-of: 0b18c852cc6f ("tracing: Have saved_cmdlines arrays all in one allocation") Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Egorenkov <[email protected]> Date: Thu Feb 25 14:28:52 2021 +0100 s390/zcore: release dump save area on restart or power down [ Upstream commit dabdfac0e85c8c1e811b10c08742f49285e78a17 ] The zFCP/NVMe standalone dumper is supposed to release the dump save area resource as soon as possible but might fail to do so, for instance, if it crashes. To avoid this situation, register a reboot notifier and ensure the dump save area resource is released on reboot or power down. Signed-off-by: Alexander Egorenkov <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Stable-dep-of: 0b18c852cc6f ("tracing: Have saved_cmdlines arrays all in one allocation") Signed-off-by: Sasha Levin <[email protected]>
Author: Anders Roxell <[email protected]> Date: Mon Aug 5 11:22:34 2024 +0200 scripts: kconfig: merge_config: config files: add a trailing newline [ Upstream commit 33330bcf031818e60a816db0cfd3add9eecc3b28 ] When merging files without trailing newlines at the end of the file, two config fragments end up at the same row if file1.config doens't have a trailing newline at the end of the file. file1.config "CONFIG_1=y" file2.config "CONFIG_2=y" ./scripts/kconfig/merge_config.sh -m .config file1.config file2.config This will generate a .config looking like this. cat .config ... CONFIG_1=yCONFIG_2=y" Making sure so we add a newline at the end of every config file that is passed into the script. Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kees Cook <[email protected]> Date: Thu Jul 11 14:57:37 2024 -0700 scsi: aacraid: Rearrange order of struct aac_srb_unit [ Upstream commit 6e5860b0ad4934baee8c7a202c02033b2631bb44 ] struct aac_srb_unit contains struct aac_srb, which contains struct sgmap, which ends in a (currently) "fake" (1-element) flexible array. Converting this to a flexible array is needed so that runtime bounds checking won't think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a flexible array. It is not legal to have a flexible array in the middle of a structure, so it either needs to be split up or rearranged so that it is at the end of the structure. Luckily, struct aac_srb_unit, which is exclusively consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member ordering. The values set in the on-stack struct aac_srb_unit instance "srbu" by the only two callers, aac_issue_safw_bmic_identify() and aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and they both implicitly initialize srbu.srb.sgmap.count to 0 during memset(). For example: memset(&srbu, 0, sizeof(struct aac_srb_unit)); srbcmd = &srbu.srb; srbcmd->flags = cpu_to_le32(SRB_DataIn); srbcmd->cdb[0] = CISS_REPORT_PHYSICAL_LUNS; srbcmd->cdb[1] = 2; /* extended reporting */ srbcmd->cdb[8] = (u8)(datasize >> 8); srbcmd->cdb[9] = (u8)(datasize); rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize); During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has srbu.srb copied into it: srb = fib_data(fibptr); memcpy(srb, &srbu->srb, sizeof(struct aac_srb)); Only then is srb.sgmap.count written and srb->sg populated: srb->count = cpu_to_le32(xfer_len); sg64 = (struct sgmap64 *)&srb->sg; sg64->count = cpu_to_le32(1); sg64->sg[0].addr[1] = cpu_to_le32(upper_32_bits(addr)); sg64->sg[0].addr[0] = cpu_to_le32(lower_32_bits(addr)); sg64->sg[0].count = cpu_to_le32(xfer_len); But this is happening in the DMA memory, not in srbu.srb. An attempt to copy the changes back to srbu does happen: /* * Copy the updated data for other dumping or other usage if * needed */ memcpy(&srbu->srb, srb, sizeof(struct aac_srb)); But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s) always meant that srbu.srb would have held truncated information and any attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count would result in attempting to parse past the end of srbu.srb.sg.sg[0] into srbu.srb_reply. After getting a reply from hardware, the reply is copied into srbu.srb_reply: srb_reply = (struct aac_srb_reply *)fib_data(fibptr); memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply)); This has always been fixed-size, so there's no issue here. It is worth noting that the two callers _never check_ srbu contents -- neither srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped xfer_buf instead.) Therefore, the ordering of members in struct aac_srb_unit does not matter, and the flexible array member can moved to the end. (Additionally, the two memcpy()s that update srbu could be entirely removed as they are never consumed, but I left that as-is.) Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xin Long <[email protected]> Date: Mon Oct 7 12:25:11 2024 -0400 sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start [ Upstream commit 4d5c70e6155d5eae198bade4afeab3c1b15073b6 ] If hashing fails in sctp_listen_start(), the socket remains in the LISTENING state, even though it was not added to the hash table. This can lead to a scenario where a socket appears to be listening without actually being accessible. This patch ensures that if the hashing operation fails, the sk_state is set back to CLOSED before returning an error. Note that there is no need to undo the autobind operation if hashing fails, as the bind port can still be used for next listen() call on the same socket. Fixes: 76c6d988aeb3 ("sctp: add sock_reuseport for the sock in __sctp_hash_endpoint") Reported-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xin Long <[email protected]> Date: Mon Sep 30 16:49:51 2024 -0400 sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start [ Upstream commit 8beee4d8dee76b67c75dc91fd8185d91e845c160 ] In sctp_listen_start() invoked by sctp_inet_listen(), it should set the sk_state back to CLOSED if sctp_autobind() fails due to whatever reason. Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash is NULL. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617 Call Trace: <TASK> __sys_listen_socket net/socket.c:1883 [inline] __sys_listen+0x1b7/0x230 net/socket.c:1894 __do_sys_listen net/socket.c:1902 [inline] Fixes: 5e8f3f703ae4 ("sctp: simplify sctp listening code") Reported-by: [email protected] Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 29 02:24:20 2024 -0700 selftests/bpf: Fix C++ compile error from missing _Bool type [ Upstream commit aa95073fd290b5b3e45f067fa22bb25e59e1ff7c ] While building, bpftool makes a skeleton from test_core_extern.c, which itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton test_core_extern.skel.h generated *does not* include <stdbool.h> or use the 'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp with g++ 12.3 for mips64el/musl-libc then fails with error: In file included from test_cpp.cpp:9: test_core_extern.skel.h:45:17: error: '_Bool' does not name a type 45 | _Bool CONFIG_BOOL; | ^~~~~ This was likely missed previously because glibc uses a GNU extension for <stdbool.h> with C++ (#define _Bool bool), not supported by musl libc. Normally, a C fragment would include <stdbool.h> and use the 'bool' type, and thus cleanly work after import by C++. The ideal fix would be for 'bpftool gen skeleton' to output the correct type/include supporting C++, but in the meantime add a conditional define as above. Fixes: 7c8dce4b1661 ("bpftool: Make skeleton C code compilable with C++ compiler") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:29 2024 -0700 selftests/bpf: Fix compile error from rlim_t in sk_storage_map.c [ Upstream commit d393f9479d4aaab0fa4c3caf513f28685e831f13 ] Cast 'rlim_t' argument to match expected type of printf() format and avoid compile errors seen building for mips64el/musl-libc: In file included from map_tests/sk_storage_map.c:20: map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free': map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=] 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ^~~~~~~~~~~~~~~~~~~~~~~ 415 | rlim_new.rlim_cur, errno); | ~~~~~~~~~~~~~~~~~ | | | rlim_t {aka long long unsigned int} ./test_maps.h:12:24: note: in definition of macro 'CHECK' 12 | printf(format); \ | ^~~~~~ map_tests/sk_storage_map.c:414:68: note: format string is defined here 414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d", | ~~^ | | | long unsigned int | %llu cc1: all warnings being treated as errors Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:40 2024 -0700 selftests/bpf: Fix compiling flow_dissector.c with musl-libc [ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ] The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest', which are not exposed by musl libc headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff' 118 | .tcp.doff = 5, | ^~~~ flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source' 119 | .tcp.source = 80, | ^~~~~~ flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest' 120 | .tcp.dest = 8080, | ^~~~ Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:39 2024 -0700 selftests/bpf: Fix compiling kfree_skb.c with musl-libc [ Upstream commit bae9a5ce7d3a9b3a9e07b31ab9e9c58450e3e9fd ] The GNU version of 'struct tcphdr' with member 'doff' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: In file included from kfree_skb.c:2: kfree_skb.c: In function 'on_sample': kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff' 45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp", | ^ Fixes: 580d656d80cf ("selftests/bpf: Add kfree_skb raw_tp test") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:41 2024 -0700 selftests/bpf: Fix compiling tcp_rtt.c with musl-libc [ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ] The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by musl headers unless _GNU_SOURCE is defined. Add this definition to fix errors seen compiling for mips64el/musl-libc: tcp_rtt.c: In function 'wait_for_ack': tcp_rtt.c:24:25: error: storage size of 'info' isn't known 24 | struct tcp_info info; | ^~~~ tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable] cc1: all warnings being treated as errors Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 29 02:24:19 2024 -0700 selftests/bpf: Fix error compiling test_lru_map.c [ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ] Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe, the sequencing can raise compile errors, so move the increment outside the macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc: In file included from test_lru_map.c:11: test_lru_map.c: In function 'sched_next_online': test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point] 129 | CPU_SET(next++, &cpuset); | ^ cc1: all warnings being treated as errors Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:46 2024 -0700 selftests/bpf: Fix errors compiling cg_storage_multi.h with musl libc [ Upstream commit 730561d3c08d4a327cceaabf11365958a1c00cec ] Remove a redundant include of '<asm/types.h>', whose needed definitions are already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c, cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids redefinition errors seen compiling for mips64el/musl-libc like: In file included from progs/cg_storage_multi_egress_only.c:13: In file included from progs/cg_storage_multi.h:6: In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23: /usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long') 29 | typedef __signed__ long __s64; | ^ /usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here 30 | __extension__ typedef __signed__ long long __s64; | ^ Fixes: 9e5bd1f7633b ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Ambardar <[email protected]> Date: Mon Jul 22 22:54:34 2024 -0700 selftests/bpf: Fix missing ARRAY_SIZE() definition in bench.c [ Upstream commit d44c93fc2f5a0c47b23fa03d374e45259abd92d2 ] Add a "bpf_util.h" include to avoid the following error seen compiling for mips64el with musl libc: bench.c: In function 'find_benchmark': bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration] 590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) { | ^~~~~~~~~~ cc1: all warnings being treated as errors Fixes: 8e7c2a023ac0 ("selftests/bpf: Add benchmark runner infrastructure") Signed-off-by: Tony Ambardar <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com Signed-off-by: Sasha Levin <[email protected]>
Author: David Hildenbrand <[email protected]> Date: Wed Aug 21 14:31:15 2024 +0200 selftests/mm: fix charge_reserved_hugetlb.sh test [ Upstream commit c41a701d18efe6b8aa402efab16edbaba50c9548 ] Currently, running the charge_reserved_hugetlb.sh selftest we can sometimes observe something like: $ ./charge_reserved_hugetlb.sh -cgroup-v2 ... write_result is 0 After write: hugetlb_usage=0 reserved_usage=10485760 killing write_to_hugetlbfs Received 2. Deleting the memory Detach failure: Invalid argument umount: /mnt/huge: target is busy. Both cases are issues in the test. While the unmount error seems to be racy, it will make the test fail: $ ./run_vmtests.sh -t hugetlb ... # [FAIL] not ok 10 charge_reserved_hugetlb.sh -cgroup-v2 # exit=32 The issue is that we are not waiting for the write_to_hugetlbfs process to quit. So it might still have a hugetlbfs file open, about which umount is not happy. Fix that by making "killall" wait for the process to quit. The other error ("Detach failure: Invalid argument") does not seem to result in a test error, but is misleading. Turns out write_to_hugetlbfs.c unconditionally tries to cleanup using shmdt(), even when we only mmap()'ed a hugetlb file. Even worse, shmaddr is never even set for the SHM case. Fix that as well. With this change it seems to work as expected. Link: https://lkml.kernel.org/r/[email protected] Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests") Signed-off-by: David Hildenbrand <[email protected]> Reported-by: Mario Casquero <[email protected]> Reviewed-by: Mina Almasry <[email protected]> Tested-by: Mario Casquero <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Muchun Song <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yifei Liu <[email protected]> Date: Mon Sep 30 15:40:25 2024 -0700 selftests: breakpoints: use remaining time to check if suspend succeed [ Upstream commit c66be905cda24fb782b91053b196bd2e966f95b7 ] step_after_suspend_test fails with device busy error while writing to /sys/power/state to start suspend. The test believes it failed to enter suspend state with $ sudo ./step_after_suspend_test TAP version 13 Bail out! Failed to enter Suspend state However, in the kernel message, I indeed see the system get suspended and then wake up later. [611172.033108] PM: suspend entry (s2idle) [611172.044940] Filesystems sync: 0.006 seconds [611172.052254] Freezing user space processes [611172.059319] Freezing user space processes completed (elapsed 0.001 seconds) [611172.067920] OOM killer disabled. [611172.072465] Freezing remaining freezable tasks [611172.080332] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [611172.089724] printk: Suspending console(s) (use no_console_suspend to debug) [611172.117126] serial 00:03: disabled some other hardware get reconnected [611203.136277] OOM killer enabled. [611203.140637] Restarting tasks ... [611203.141135] usb 1-8.1: USB disconnect, device number 7 [611203.141755] done. [611203.155268] random: crng reseeded on system resumption [611203.162059] PM: suspend exit After investigation, I noticed that for the code block if (write(power_state_fd, "mem", strlen("mem")) != strlen("mem")) ksft_exit_fail_msg("Failed to enter Suspend state\n"); The write will return -1 and errno is set to 16 (device busy). It should be caused by the write function is not successfully returned before the system suspend and the return value get messed when waking up. As a result, It may be better to check the time passed of those few instructions to determine whether the suspend is executed correctly for it is pretty hard to execute those few lines for 5 seconds. The timer to wake up the system is set to expire after 5 seconds and no re-arm. If the timer remaining time is 0 second and 0 nano secomd, it means the timer expired and wake the system up. Otherwise, the system could be considered to enter the suspend state failed if there is any remaining time. After appling this patch, the test would not fail for it believes the system does not go to suspend by mistake. It now could continue to the rest part of the test after suspend. Fixes: bfd092b8c272 ("selftests: breakpoint: add step_after_suspend_test") Reported-by: Sinadin Shan <[email protected]> Signed-off-by: Yifei Liu <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Fri Aug 30 14:28:37 2024 +0200 selftests: vDSO: fix vDSO symbols lookup for powerpc64 [ Upstream commit ba83b3239e657469709d15dcea5f9b65bf9dbf34 ] On powerpc64, following tests fail locating vDSO functions: ~ # ./vdso_test_abi TAP version 13 1..16 # [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15 # Couldn't find __kernel_gettimeofday ok 1 # SKIP __kernel_gettimeofday # clock_id: CLOCK_REALTIME # Couldn't find __kernel_clock_gettime ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME # Couldn't find __kernel_clock_getres ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME ... # Couldn't find __kernel_time ok 16 # SKIP __kernel_time # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0 ~ # ./vdso_test_getrandom __kernel_getrandom is missing! ~ # ./vdso_test_gettimeofday Could not find __kernel_gettimeofday ~ # ./vdso_test_getcpu Could not find __kernel_getcpu On powerpc64, as shown below by readelf, vDSO functions symbols have type NOTYPE, so also accept that type when looking for symbols. $ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg ELF Header: Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 Class: ELF64 Data: 2's complement, big endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: DYN (Shared object file) Machine: PowerPC64 Version: 0x1 ... Symbol table '.dynsym' contains 12 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 2: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 3: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 6: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 7: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 8: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 9: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 10: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 11: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15 Symbol table '.symtab' contains 56 entries: Num: Value Size Type Bind Vis Ndx Name ... 45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15 46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu 47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres 48: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __kernel_get_tbfreq 49: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __kernel_gettimeofday 50: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __kernel_sync_dicache 51: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_getrandom 52: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __kernel_sigtram[...] 53: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __kernel_time 54: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_g[...] 55: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __kernel_get_sys[...] Fixes: 98eedc3a9dbf ("Document the vDSO and add a reference parser") Signed-off-by: Christophe Leroy <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Scott Mayhew <[email protected]> Date: Wed Aug 28 15:51:29 2024 -0400 selinux,smack: don't bypass permissions check in inode_setsecctx hook commit 76a0e79bc84f466999fa501fce5bf7a07641b8a7 upstream. Marek Gresko reports that the root user on an NFS client is able to change the security labels on files on an NFS filesystem that is exported with root squashing enabled. The end of the kerneldoc comment for __vfs_setxattr_noperm() states: * This function requires the caller to lock the inode's i_mutex before it * is executed. It also assumes that the caller will make the appropriate * permission checks. nfsd_setattr() does do permissions checking via fh_verify() and nfsd_permission(), but those don't do all the same permissions checks that are done by security_inode_setxattr() and its related LSM hooks do. Since nfsd_setattr() is the only consumer of security_inode_setsecctx(), simplest solution appears to be to replace the call to __vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This fixes the above issue and has the added benefit of causing nfsd to recall conflicting delegations on a file when a client tries to change its security label. Cc: [email protected] Reported-by: Marek Gresko <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=218809 Signed-off-by: Scott Mayhew <[email protected]> Tested-by: Stephen Smalley <[email protected]> Reviewed-by: Stephen Smalley <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Acked-by: Casey Schaufler <[email protected]> Signed-off-by: Paul Moore <[email protected]> [Shivani: Modified to apply on v5.10.y] Signed-off-by: Shivani Agarwal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Gleixner <[email protected]> Date: Mon Jun 10 18:42:34 2024 +0200 signal: Replace BUG_ON()s [ Upstream commit 7f8af7bac5380f2d95a63a6f19964e22437166e1 ] These really can be handled gracefully without killing the machine. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Reviewed-by: Oleg Nesterov <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Wed Oct 9 09:11:32 2024 +0000 slip: make slhc_remember() more robust against malicious packets [ Upstream commit 7d3fce8cbe3a70a1c7c06c9b53696be5d5d8dd5c ] syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiawei Ye <[email protected]> Date: Mon Sep 2 08:47:26 2024 +0000 smackfs: Use rcu_assign_pointer() to ensure safe assignment in smk_set_cipso [ Upstream commit 2749749afa071f8a0e405605de9da615e771a7ce ] In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat` field is directly assigned to a new value without using the appropriate RCU pointer assignment functions. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, including data inconsistencies and impossible-to-diagnose memory corruption issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the assignment is now done using rcu_assign_pointer(), which ensures that the pointer assignment is done safely, with the necessary memory barriers and synchronization. This change prevents potential RCU dereference issues by ensuring that the `cat` field is safely updated while still adhering to RCU's requirements. Fixes: 0817534ff9ea ("smackfs: Fix use-after-free in netlbl_catmap_walk()") Signed-off-by: Jiawei Ye <[email protected]> Signed-off-by: Casey Schaufler <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Aug 25 20:05:22 2024 +0200 soc: versatile: integrator: fix OF node leak in probe() error path commit 874c5b601856adbfda10846b9770a6c66c41e229 upstream. Driver is leaking OF node reference obtained from of_find_matching_node(). Fixes: f956a785a282 ("soc: move SoC driver for the ARM Integrator") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Aug 25 20:05:23 2024 +0200 soc: versatile: realview: fix memory leak during device remove [ Upstream commit 1c4f26a41f9d052f334f6ae629e01f598ed93508 ] If device is unbound, the memory allocated for soc_dev_attr should be freed to prevent leaks. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Stable-dep-of: c774f2564c00 ("soc: versatile: realview: fix soc_dev leak during device remove") Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sun Aug 25 20:05:24 2024 +0200 soc: versatile: realview: fix soc_dev leak during device remove [ Upstream commit c774f2564c0086c23f5269fd4691f233756bf075 ] If device is unbound, the soc_dev should be unregistered to prevent memory leak. Fixes: a2974c9c1f83 ("soc: add driver for the ARM RealView") Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Fri Sep 6 15:44:49 2024 +0000 sock_map: Add a cond_resched() in sock_hash_free() [ Upstream commit b1339be951ad31947ae19bc25cb08769bf255100 ] Several syzbot soft lockup reports all have in common sock_hash_free() If a map with a large number of buckets is destroyed, we need to yield the cpu when needed. Fixes: 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Mon Sep 9 18:47:46 2024 +0200 soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps" commit 233a95fd574fde1c375c486540a90304a2d2d49f upstream. This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it breaks codecs using non-continuous masks in source and sink ports. The commit missed the point that port numbers are not used as indices for iterating over prop.sink_ports or prop.source_ports. Soundwire core and existing codecs expect that the array passed as prop.sink_ports and prop.source_ports is continuous. The port mask still might be non-continuous, but that's unrelated. Reported-by: Bard Liao <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao <[email protected]> Reviewed-by: Charles Keepax <[email protected]> Cc: [email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Tested-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Liao Chen <[email protected]> Date: Sat Aug 31 09:42:31 2024 +0000 spi: bcm63xx: Enable module autoloading [ Upstream commit 709df70a20e990d262c473ad9899314039e8ec82 ] Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Mon Aug 19 20:33:48 2024 +0800 spi: bcm63xx: Fix module autoloading commit 909f34f2462a99bf876f64c5c61c653213e32fce upstream. Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from platform_device_id table. Fixes: 44d8fb30941d ("spi/bcm63xx: move register definitions into the driver") Cc: [email protected] Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Jonas Gorski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alexander Stein <[email protected]> Date: Tue Nov 9 11:31:34 2021 +0100 spi: lpspi: release requested DMA channels [ Upstream commit f02bff30114f385d53ae3e45141db602923bca5d ] The requested DMA channels are never released. Do this in .remove as well as in .probe. spi_register_controller() can return -EPROBE_DEFER if cs-gpios are not probed yet. Signed-off-by: Alexander Stein <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Stable-dep-of: 3b577de206d5 ("spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time") Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Stein <[email protected]> Date: Mon Nov 8 15:55:23 2021 +0100 spi: lpspi: Silence error message upon deferred probe [ Upstream commit 12f62a857c83b2efcbf8d9961aacd352bf81ad3d ] Do not print error messages with error code -517. Silences the following errors upon on imx8qm: fsl_lpspi 5a000000.spi: spi_register_controller error: -517 fsl_lpspi 5a010000.spi: spi_register_controller error: -517 fsl_lpspi 5a020000.spi: spi_register_controller error: -517 Signed-off-by: Alexander Stein <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Stable-dep-of: 3b577de206d5 ("spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time") Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Fri Aug 5 23:39:19 2022 +0200 spi: lpspi: Simplify some error message commit 0df874c6712d9aa8f43c50ec887a21f7b86fc917 upstream. dev_err_probe() already prints the error code in a human readable way, so there is no need to duplicate it as a numerical value at the end of the message. Fixes: 12f62a857c83 ("spi: lpspi: Silence error message upon deferred probe") Signed-off-by: Christophe JAILLET <[email protected]> Acked-By: Alexander Stein <[email protected]> Link: https://lore.kernel.org/r/253543c462b765eca40ba54c66f4e3fdf4acdeb7.1659735546.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Han Xu <[email protected]> Date: Wed Sep 11 16:11:45 2024 -0500 spi: nxp-fspi: fix the KASAN report out-of-bounds bug commit 2a8787c1cdc7be24fdd8953ecd1a8743a1006235 upstream. Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ================================================================== [ 37.254394] Disabling lock debugging due to kernel taint 0+1 records in 0+1 records out 3 bytes copied, 0.335911 s, 0.0 kB/s Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Cc: [email protected] Signed-off-by: Han Xu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Andy Shevchenko <[email protected]> Date: Wed Aug 14 17:45:12 2024 +0300 spi: ppc4xx: Avoid returning 0 when failed to parse and map IRQ [ Upstream commit 7781f1d120fec8624fc654eda900fc8748262082 ] 0 is incorrect error code when failed to parse and map IRQ. Replace OF specific old API for IRQ retrieval with a generic one to fix this issue. Fixes: 0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors") Signed-off-by: Andy Shevchenko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ma Ke <[email protected]> Date: Wed Jul 24 16:40:47 2024 +0800 spi: ppc4xx: handle irq_of_parse_and_map() errors [ Upstream commit 0f245463b01ea254ae90e1d0389e90b0e7d8dc75 ] Zero and negative number is not a valid IRQ for in-kernel code and the irq_of_parse_and_map() function returns zero on error. So this check for valid IRQs should only accept values > 0. Fixes: 44dab88e7cc9 ("spi: add spi_ppc4xx driver") Signed-off-by: Ma Ke <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ben Dooks <[email protected]> Date: Tue Sep 24 14:40:08 2024 +0100 spi: s3c64xx: fix timeout counters in flush_fifo [ Upstream commit 68a16708d2503b6303d67abd43801e2ca40c208d ] In the s3c64xx_flush_fifo() code, the loops counter is post-decremented in the do { } while(test && loops--) condition. This means the loops is left at the unsigned equivalent of -1 if the loop times out. The test after will never pass as if tests for loops == 0. Signed-off-by: Ben Dooks <[email protected]> Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver") Reviewed-by: Andi Shyti <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Fri Sep 6 10:12:51 2024 +0800 spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time [ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ] It's important to undo pm_runtime_use_autosuspend() with pm_runtime_dont_use_autosuspend() at driver exit time unless driver initially enabled pm_runtime with devm_pm_runtime_enable() (which handles it for you). Hence, call pm_runtime_dont_use_autosuspend() at driver exit time to fix it. Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Mon Sep 23 12:00:13 2024 +0800 spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled [ Upstream commit b6e05ba0844139dde138625906015c974c86aa93 ] It is not valid to call pm_runtime_set_suspended() for devices with runtime PM enabled because it returns -EAGAIN if it is enabled already and working. So, call pm_runtime_disable() before to fix it. Fixes: 43b6bf406cd0 ("spi: imx: fix runtime pm support for !CONFIG_PM") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Thu Sep 19 11:50:33 2024 +0300 SUNRPC: Fix integer overflow in decode_rc_list() [ Upstream commit 6dbf1f341b6b35bcc20ff95b6b315e509f6c5369 ] The math in "rc_list->rcl_nrefcalls * 2 * sizeof(uint32_t)" could have an integer overflow. Add bounds checking on rc_list->rcl_nrefcalls to fix that. Fixes: 4aece6a19cf7 ("nfs41: cb_sequence xdr implementation") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason Xing <[email protected]> Date: Fri Aug 23 08:11:52 2024 +0800 tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process [ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ] We found that one close-wait socket was reset by the other side due to a new connection reusing the same port which is beyond our expectation, so we have to investigate the underlying reason. The following experiment is conducted in the test environment. We limit the port range from 40000 to 40010 and delay the time to close() after receiving a fin from the active close side, which can help us easily reproduce like what happened in production. Here are three connections captured by tcpdump: 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1 // a few seconds later, within 60 seconds 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2 127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193 // later, very quickly 127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730 127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805 127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1 As we can see, the first flow is reset because: 1) client starts a new connection, I mean, the second one 2) client tries to find a suitable port which is a timewait socket (its state is timewait, substate is fin_wait2) 3) client occupies that timewait port to send a SYN 4) server finds a corresponding close-wait socket in ehash table, then replies with a challenge ack 5) client sends an RST to terminate this old close-wait socket. I don't think the port selection algo can choose a FIN_WAIT2 socket when we turn on tcp_tw_reuse because on the server side there remain unread data. In some cases, if one side haven't call close() yet, we should not consider it as expendable and treat it at will. Even though, sometimes, the server isn't able to call close() as soon as possible like what we expect, it can not be terminated easily, especially due to a second unrelated connection happening. After this patch, we can see the expected failure if we start a connection when all the ports are occupied in fin_wait2 state: "Ncat: Cannot assign requested address." Reported-by: Jade Dong <[email protected]> Signed-off-by: Jason Xing <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Josh Hunt <[email protected]> Date: Tue Sep 10 15:08:22 2024 -0400 tcp: check skb is non-NULL in tcp_rto_delta_us() [ Upstream commit c8770db2d54437a5f49417ae7b46f7de23d14db6 ] We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_event+0x21/0x30 Jul 26 15:05:02 rx [11061396.021984] ? clockevents_program_event+0x8f/0xe0 Jul 26 15:05:02 rx [11061396.027035] run_timer_softirq+0x2a/0x50 Jul 26 15:05:02 rx [11061396.031212] __do_softirq+0xd1/0x2c1 Jul 26 15:05:02 rx [11061396.035044] do_softirq_own_stack+0x2a/0x40 Jul 26 15:05:02 rx [11061396.039480] Jul 26 15:05:02 rx [11061396.041840] do_softirq.part.0+0x46/0x50 Jul 26 15:05:02 rx [11061396.046022] __local_bh_enable_ip+0x50/0x60 Jul 26 15:05:02 rx [11061396.050460] _raw_spin_unlock_bh+0x1e/0x20 Jul 26 15:05:02 rx [11061396.054817] nf_conntrack_tcp_packet+0x29e/0xbe0 [nf_conntrack] Jul 26 15:05:02 rx [11061396.060994] ? get_l4proto+0xe7/0x190 [nf_conntrack] Jul 26 15:05:02 rx [11061396.066220] nf_conntrack_in+0xe9/0x670 [nf_conntrack] Jul 26 15:05:02 rx [11061396.071618] ipv6_conntrack_local+0x14/0x20 [nf_conntrack] Jul 26 15:05:02 rx [11061396.077356] nf_hook_slow+0x45/0xb0 Jul 26 15:05:02 rx [11061396.081098] ip6_xmit+0x3f0/0x5d0 Jul 26 15:05:02 rx [11061396.084670] ? ipv6_anycast_cleanup+0x50/0x50 Jul 26 15:05:02 rx [11061396.089282] ? __sk_dst_check+0x38/0x70 Jul 26 15:05:02 rx [11061396.093381] ? inet6_csk_route_socket+0x13b/0x200 Jul 26 15:05:02 rx [11061396.098346] inet6_csk_xmit+0xa7/0xf0 Jul 26 15:05:02 rx [11061396.102263] __tcp_transmit_skb+0x550/0xb30 Jul 26 15:05:02 rx [11061396.106701] tcp_write_xmit+0x3c6/0xc20 Jul 26 15:05:02 rx [11061396.110792] ? __alloc_skb+0x98/0x1d0 Jul 26 15:05:02 rx [11061396.114708] __tcp_push_pending_frames+0x37/0x100 Jul 26 15:05:02 rx [11061396.119667] tcp_push+0xfd/0x100 Jul 26 15:05:02 rx [11061396.123150] tcp_sendmsg_locked+0xc70/0xdd0 Jul 26 15:05:02 rx [11061396.127588] tcp_sendmsg+0x2d/0x50 Jul 26 15:05:02 rx [11061396.131245] inet6_sendmsg+0x43/0x70 Jul 26 15:05:02 rx [11061396.135075] __sock_sendmsg+0x48/0x70 Jul 26 15:05:02 rx [11061396.138994] ____sys_sendmsg+0x212/0x280 Jul 26 15:05:02 rx [11061396.143172] ___sys_sendmsg+0x88/0xd0 Jul 26 15:05:02 rx [11061396.147098] ? __seccomp_filter+0x7e/0x6b0 Jul 26 15:05:02 rx [11061396.151446] ? __switch_to+0x39c/0x460 Jul 26 15:05:02 rx [11061396.155453] ? __switch_to_asm+0x42/0x80 Jul 26 15:05:02 rx [11061396.159636] ? __switch_to_asm+0x5a/0x80 Jul 26 15:05:02 rx [11061396.163816] __sys_sendmsg+0x5c/0xa0 Jul 26 15:05:02 rx [11061396.167647] __x64_sys_sendmsg+0x1f/0x30 Jul 26 15:05:02 rx [11061396.171832] do_syscall_64+0x57/0x190 Jul 26 15:05:02 rx [11061396.175748] entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Jul 26 15:05:02 rx [11061396.181055] RIP: 0033:0x7f1ef692618d Jul 26 15:05:02 rx [11061396.184893] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48 Jul 26 15:05:02 rx [11061396.203889] RSP: 002b:00007f1ef4a26aa0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e Jul 26 15:05:02 rx [11061396.211708] RAX: ffffffffffffffda RBX: 000000000000084b RCX: 00007f1ef692618d Jul 26 15:05:02 rx [11061396.219091] RDX: 0000000000004000 RSI: 00007f1ef4a26b10 RDI: 0000000000000275 Jul 26 15:05:02 rx [11061396.226475] RBP: 0000000000004000 R08: 0000000000000000 R09: 0000000000000020 Jul 26 15:05:02 rx [11061396.233859] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000084b Jul 26 15:05:02 rx [11061396.241243] R13: 00007f1ef4a26b10 R14: 0000000000000275 R15: 000055592030f1e8 Jul 26 15:05:02 rx [11061396.248628] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler nft_ct sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 mlx5_core hid_generic pci_hyperv_intf crc32_pclmul tls usbhid ahci mlxfw bnxt_en libahci hid nvme i2c_piix4 nvme_core wmi Jul 26 15:05:02 rx [11061396.324334] CR2: 0000000000000020 Jul 26 15:05:02 rx [11061396.327944] ---[ end trace 68a2b679d1cfb4f1 ]--- Jul 26 15:05:02 rx [11061396.433435] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061396.438137] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061396.457144] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061396.462629] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061396.470012] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061396.477396] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061396.484779] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061396.492164] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061396.499547] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061396.507886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061396.513884] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061396.521267] PKRU: 55555554 Jul 26 15:05:02 rx [11061396.524230] Kernel panic - not syncing: Fatal exception in interrupt Jul 26 15:05:02 rx [11061396.530885] Kernel Offset: 0x1b200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Jul 26 15:05:03 rx [11061396.660181] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- After we hit this we disabled TLP by setting tcp_early_retrans to 0 and then hit the crash in the RACK case: Aug 7 07:26:16 rx [1006006.265582] BUG: kernel NULL pointer dereference, address: 0000000000000020 Aug 7 07:26:16 rx [1006006.272719] #PF: supervisor read access in kernel mode Aug 7 07:26:16 rx [1006006.278030] #PF: error_code(0x0000) - not-present page Aug 7 07:26:16 rx [1006006.283343] PGD 0 P4D 0 Aug 7 07:26:16 rx [1006006.286057] Oops: 0000 [#1] SMP NOPTI Aug 7 07:26:16 rx [1006006.289896] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.4.0-174-generic #193-Ubuntu Aug 7 07:26:16 rx [1006006.299107] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Aug 7 07:26:16 rx [1006006.309970] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.314584] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Aug 7 07:26:16 rx [1006006.333499] RSP: 0018:ffffb42600a50960 EFLAGS: 00010246 Aug 7 07:26:16 rx [1006006.338895] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Aug 7 07:26:16 rx [1006006.346193] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff92d687ed8160 Aug 7 07:26:16 rx [1006006.353489] RBP: ffffb42600a50978 R08: 0000000000000000 R09: 00000000cd896dcc Aug 7 07:26:16 rx [1006006.360786] R10: ffff92dc3404f400 R11: 0000000000000001 R12: ffff92d687ed8000 Aug 7 07:26:16 rx [1006006.368084] R13: ffff92d687ed8160 R14: 00000000cd896dcc R15: 00000000cd8fca81 Aug 7 07:26:16 rx [1006006.375381] FS: 0000000000000000(0000) GS:ffff93158ad40000(0000) knlGS:0000000000000000 Aug 7 07:26:16 rx [1006006.383632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Aug 7 07:26:16 rx [1006006.389544] CR2: 0000000000000020 CR3: 0000003e775ce006 CR4: 0000000000760ee0 Aug 7 07:26:16 rx [1006006.396839] PKRU: 55555554 Aug 7 07:26:16 rx [1006006.399717] Call Trace: Aug 7 07:26:16 rx [1006006.402335] Aug 7 07:26:16 rx [1006006.404525] ? show_regs.cold+0x1a/0x1f Aug 7 07:26:16 rx [1006006.408532] ? __die+0x90/0xd9 Aug 7 07:26:16 rx [1006006.411760] ? no_context+0x196/0x380 Aug 7 07:26:16 rx [1006006.415599] ? __bad_area_nosemaphore+0x50/0x1a0 Aug 7 07:26:16 rx [1006006.420392] ? _raw_spin_lock+0x1e/0x30 Aug 7 07:26:16 rx [1006006.424401] ? bad_area_nosemaphore+0x16/0x20 Aug 7 07:26:16 rx [1006006.428927] ? do_user_addr_fault+0x267/0x450 Aug 7 07:26:16 rx [1006006.433450] ? __do_page_fault+0x58/0x90 Aug 7 07:26:16 rx [1006006.437542] ? do_page_fault+0x2c/0xe0 Aug 7 07:26:16 rx [1006006.441470] ? page_fault+0x34/0x40 Aug 7 07:26:16 rx [1006006.445134] ? tcp_rearm_rto+0xe4/0x160 Aug 7 07:26:16 rx [1006006.449145] tcp_ack+0xa32/0xb30 Aug 7 07:26:16 rx [1006006.452542] tcp_rcv_established+0x13c/0x670 Aug 7 07:26:16 rx [1006006.456981] ? sk_filter_trim_cap+0x48/0x220 Aug 7 07:26:16 rx [1006006.461419] tcp_v6_do_rcv+0xdb/0x450 Aug 7 07:26:16 rx [1006006.465257] tcp_v6_rcv+0xc2b/0xd10 Aug 7 07:26:16 rx [1006006.468918] ip6_protocol_deliver_rcu+0xd3/0x4e0 Aug 7 07:26:16 rx [1006006.473706] ip6_input_finish+0x15/0x20 Aug 7 07:26:16 rx [1006006.477710] ip6_input+0xa2/0xb0 Aug 7 07:26:16 rx [1006006.481109] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Aug 7 07:26:16 rx [1006006.486151] ip6_sublist_rcv_finish+0x3d/0x50 Aug 7 07:26:16 rx [1006006.490679] ip6_sublist_rcv+0x1aa/0x250 Aug 7 07:26:16 rx [1006006.494779] ? ip6_rcv_finish_core.isra.0+0xa0/0xa0 Aug 7 07:26:16 rx [1006006.499828] ipv6_list_rcv+0x112/0x140 Aug 7 07:26:16 rx [1006006.503748] __netif_receive_skb_list_core+0x1a4/0x250 Aug 7 07:26:16 rx [1006006.509057] netif_receive_skb_list_internal+0x1a1/0x2b0 Aug 7 07:26:16 rx [1006006.514538] gro_normal_list.part.0+0x1e/0x40 Aug 7 07:26:16 rx [1006006.519068] napi_complete_done+0x91/0x130 Aug 7 07:26:16 rx [1006006.523352] mlx5e_napi_poll+0x18e/0x610 [mlx5_core] Aug 7 07:26:16 rx [1006006.528481] net_rx_action+0x142/0x390 Aug 7 07:26:16 rx [1006006.532398] __do_softirq+0xd1/0x2c1 Aug 7 07:26:16 rx [1006006.536142] irq_exit+0xae/0xb0 Aug 7 07:26:16 rx [1006006.539452] do_IRQ+0x5a/0xf0 Aug 7 07:26:16 rx [1006006.542590] common_interrupt+0xf/0xf Aug 7 07:26:16 rx [1006006.546421] Aug 7 07:26:16 rx [1006006.548695] RIP: 0010:native_safe_halt+0xe/0x10 Aug 7 07:26:16 rx [1006006.553399] Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Aug 7 07:26:16 rx [1006006.572309] RSP: 0018:ffffb42600177e70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffc2 Aug 7 07:26:16 rx [1006006.580040] RAX: ffffffff8ed08b20 RBX: 0000000000000005 RCX: 0000000000000001 Aug 7 07:26:16 rx [1006006.587337] RDX: 00000000f48eeca2 RSI: 0000000000000082 RDI: 0000000000000082 Aug 7 07:26:16 rx [1006006.594635] RBP: ffffb42600177e90 R08: 0000000000000000 R09: 000000000000020f Aug 7 07:26:16 rx [1006006.601931] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000005 Aug 7 07:26:16 rx [1006006.609229] R13: ffff93157deb5f00 R14: 0000000000000000 R15: 0000000000000000 Aug 7 07:26:16 rx [1006006.616530] ? __cpuidle_text_start+0x8/0x8 Aug 7 07:26:16 rx [1006006.620886] ? default_idle+0x20/0x140 Aug 7 07:26:16 rx [1006006.624804] arch_cpu_idle+0x15/0x20 Aug 7 07:26:16 rx [1006006.628545] default_idle_call+0x23/0x30 Aug 7 07:26:16 rx [1006006.632640] do_idle+0x1fb/0x270 Aug 7 07:26:16 rx [1006006.636035] cpu_startup_entry+0x20/0x30 Aug 7 07:26:16 rx [1006006.640126] start_secondary+0x178/0x1d0 Aug 7 07:26:16 rx [1006006.644218] secondary_startup_64+0xa4/0xb0 Aug 7 07:26:17 rx [1006006.648568] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet ast mii drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 hid_generic mlx5_core pci_hyperv_intf crc32_pclmul usbhid ahci tls mlxfw bnxt_en hid libahci nvme i2c_piix4 nvme_core wmi [last unloaded: cpuid] Aug 7 07:26:17 rx [1006006.726180] CR2: 0000000000000020 Aug 7 07:26:17 rx [1006006.729718] ---[ end trace e0e2e37e4e612984 ]--- Prior to seeing the first crash and on other machines we also see the warning in tcp_send_loss_probe() where packets_out is non-zero, but both transmit and retrans queues are empty so we know the box is seeing some accounting issue in this area: Jul 26 09:15:27 kernel: ------------[ cut here ]------------ Jul 26 09:15:27 kernel: invalid inflight: 2 state 1 cwnd 68 mss 8988 Jul 26 09:15:27 kernel: WARNING: CPU: 16 PID: 0 at net/ipv4/tcp_output.c:2605 tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif joydev input_leds rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_he> Jul 26 09:15:27 kernel: CPU: 16 PID: 0 Comm: swapper/16 Not tainted 5.4.0-174-generic #193-Ubuntu Jul 26 09:15:27 kernel: Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 09:15:27 kernel: RIP: 0010:tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: Code: 08 26 01 00 75 e2 41 0f b6 54 24 12 41 8b 8c 24 c0 06 00 00 45 89 f0 48 c7 c7 e0 b4 20 a7 c6 05 8d 08 26 01 01 e8 4a c0 0f 00 <0f> 0b eb ba 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 Jul 26 09:15:27 kernel: RSP: 0018:ffffb7838088ce00 EFLAGS: 00010286 Jul 26 09:15:27 kernel: RAX: 0000000000000000 RBX: ffff9b84b5630430 RCX: 0000000000000006 Jul 26 09:15:27 kernel: RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9b8e4621c8c0 Jul 26 09:15:27 kernel: RBP: ffffb7838088ce18 R08: 0000000000000927 R09: 0000000000000004 Jul 26 09:15:27 kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff9b84b5630000 Jul 26 09:15:27 kernel: R13: 0000000000000000 R14: 000000000000231c R15: ffff9b84b5630430 Jul 26 09:15:27 kernel: FS: 0000000000000000(0000) GS:ffff9b8e46200000(0000) knlGS:0000000000000000 Jul 26 09:15:27 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 09:15:27 kernel: CR2: 000056238cec2380 CR3: 0000003e49ede005 CR4: 0000000000760ee0 Jul 26 09:15:27 kernel: PKRU: 55555554 Jul 26 09:15:27 kernel: Call Trace: Jul 26 09:15:27 kernel: <IRQ> Jul 26 09:15:27 kernel: ? show_regs.cold+0x1a/0x1f Jul 26 09:15:27 kernel: ? __warn+0x98/0xe0 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? report_bug+0xd1/0x100 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0 Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30 Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220 Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240 Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0 Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240 Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130 Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280 Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0 Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90 Jul 26 09:15:27 kernel: ? recalibrate_cpu_khz+0x10/0x10 Jul 26 09:15:27 kernel: ? ktime_get+0x3e/0xa0 Jul 26 09:15:27 kernel: ? native_x2apic_icr_write+0x30/0x30 Jul 26 09:15:27 kernel: run_timer_softirq+0x2a/0x50 Jul 26 09:15:27 kernel: __do_softirq+0xd1/0x2c1 Jul 26 09:15:27 kernel: irq_exit+0xae/0xb0 Jul 26 09:15:27 kernel: smp_apic_timer_interrupt+0x7b/0x140 Jul 26 09:15:27 kernel: apic_timer_interrupt+0xf/0x20 Jul 26 09:15:27 kernel: </IRQ> Jul 26 09:15:27 kernel: RIP: 0010:native_safe_halt+0xe/0x10 Jul 26 09:15:27 kernel: Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 <c3> 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65 Jul 26 09:15:27 kernel: RSP: 0018:ffffb783801cfe70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 Jul 26 09:15:27 kernel: RAX: ffffffffa6908b20 RBX: 0000000000000010 RCX: 0000000000000001 Jul 26 09:15:27 kernel: RDX: 000000006fc0c97e RSI: 0000000000000082 RDI: 0000000000000082 Jul 26 09:15:27 kernel: RBP: ffffb783801cfe90 R08: 0000000000000000 R09: 0000000000000225 Jul 26 09:15:27 kernel: R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000010 Jul 26 09:15:27 kernel: R13: ffff9b8e390b0000 R14: 0000000000000000 R15: 0000000000000000 Jul 26 09:15:27 kernel: ? __cpuidle_text_start+0x8/0x8 Jul 26 09:15:27 kernel: ? default_idle+0x20/0x140 Jul 26 09:15:27 kernel: arch_cpu_idle+0x15/0x20 Jul 26 09:15:27 kernel: default_idle_call+0x23/0x30 Jul 26 09:15:27 kernel: do_idle+0x1fb/0x270 Jul 26 09:15:27 kernel: cpu_startup_entry+0x20/0x30 Jul 26 09:15:27 kernel: start_secondary+0x178/0x1d0 Jul 26 09:15:27 kernel: secondary_startup_64+0xa4/0xb0 Jul 26 09:15:27 kernel: ---[ end trace e7ac822987e33be1 ]--- The NULL ptr deref is coming from tcp_rto_delta_us() attempting to pull an skb off the head of the retransmit queue and then dereferencing that skb to get the skb_mstamp_ns value via tcp_skb_timestamp_us(skb). The crash is the same one that was reported a # of years ago here: https://lore.kernel.org/netdev/[email protected]/T/#t and the kernel we're running has the fix which was added to resolve this issue. Unfortunately we've been unsuccessful so far in reproducing this problem in the lab and do not have the luxury of pushing out a new kernel to try and test if newer kernels resolve this issue at the moment. I realize this is a report against both an Ubuntu kernel and also an older 5.4 kernel. I have reported this issue to Ubuntu here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2077657 however I feel like since this issue has possibly cropped up again it makes sense to build in some protection in this path (even on the latest kernel versions) since the code in question just blindly assumes there's a valid skb without testing if it's NULL b/f it looks at the timestamp. Given we have seen crashes in this path before and now this case it seems like we should protect ourselves for when packets_out accounting is incorrect. While we should fix that root cause we should also just make sure the skb is not NULL before dereferencing it. Also add a warn once here to capture some information if/when the problem case is hit again. Fixes: e1a10ef7fa87 ("tcp: introduce tcp_rto_delta_us() helper for xmit timer fix") Signed-off-by: Josh Hunt <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Neal Cardwell <[email protected]> Date: Tue Oct 1 20:05:16 2024 +0000 tcp: fix tcp_enter_recovery() to zero retrans_stamp when it's safe [ Upstream commit b41b4cbd9655bcebcce941bef3601db8110335be ] Fix tcp_enter_recovery() so that if there are no retransmits out then we zero retrans_stamp when entering fast recovery. This is necessary to fix two buggy behaviors. Currently a non-zero retrans_stamp value can persist across multiple back-to-back loss recovery episodes. This is because we generally only clears retrans_stamp if we are completely done with loss recoveries, and get to tcp_try_to_open() and find !tcp_any_retrans_done(sk). This behavior causes two bugs: (1) When a loss recovery episode (CA_Loss or CA_Recovery) is followed immediately by a new CA_Recovery, the retrans_stamp value can persist and can be a time before this new CA_Recovery episode starts. That means that timestamp-based undo will be using the wrong retrans_stamp (a value that is too old) when comparing incoming TS ecr values to retrans_stamp to see if the current fast recovery episode can be undone. (2) If there is a roughly minutes-long sequence of back-to-back fast recovery episodes, one after another (e.g. in a shallow-buffered or policed bottleneck), where each fast recovery successfully makes forward progress and recovers one window of sequence space (but leaves at least one retransmit in flight at the end of the recovery), followed by several RTOs, then the ETIMEDOUT check may be using the wrong retrans_stamp (a value set at the start of the first fast recovery in the sequence). This can cause a very premature ETIMEDOUT, killing the connection prematurely. This commit changes the code to zero retrans_stamp when entering fast recovery, when this is known to be safe (no retransmits are out in the network). That ensures that when starting a fast recovery episode, and it is safe to do so, retrans_stamp is set when we send the fast retransmit packet. That addresses both bug (1) and bug (2) by ensuring that (if no retransmits are out when we start a fast recovery) we use the initial fast retransmit of this fast recovery as the time value for undo and ETIMEDOUT calculations. This makes intuitive sense, since the start of a new fast recovery episode (in a scenario where no lost packets are out in the network) means that the connection has made forward progress since the last RTO or fast recovery, and we should thus "restart the clock" used for both undo and ETIMEDOUT logic. Note that if when we start fast recovery there *are* retransmits out in the network, there can still be undesirable (1)/(2) issues. For example, after this patch we can still have the (1) and (2) problems in cases like this: + round 1: sender sends flight 1 + round 2: sender receives SACKs and enters fast recovery 1, retransmits some packets in flight 1 and then sends some new data as flight 2 + round 3: sender receives some SACKs for flight 2, notes losses, and retransmits some packets to fill the holes in flight 2 + fast recovery has some lost retransmits in flight 1 and continues for one or more rounds sending retransmits for flight 1 and flight 2 + fast recovery 1 completes when snd_una reaches high_seq at end of flight 1 + there are still holes in the SACK scoreboard in flight 2, so we enter fast recovery 2, but some retransmits in the flight 2 sequence range are still in flight (retrans_out > 0), so we can't execute the new retrans_stamp=0 added here to clear retrans_stamp It's not yet clear how to fix these remaining (1)/(2) issues in an efficient way without breaking undo behavior, given that retrans_stamp is currently used for undo and ETIMEDOUT. Perhaps the optimal (but expensive) strategy would be to set retrans_stamp to the timestamp of the earliest outstanding retransmit when entering fast recovery. But at least this commit makes things better. Note that this does not change the semantics of retrans_stamp; it simply makes retrans_stamp accurate in some cases where it was not before: (1) Some loss recovery, followed by an immediate entry into a fast recovery, where there are no retransmits out when entering the fast recovery. (2) When a TFO server has a SYNACK retransmit that sets retrans_stamp, and then the ACK that completes the 3-way handshake has SACK blocks that trigger a fast recovery. In this case when entering fast recovery we want to zero out the retrans_stamp from the TFO SYNACK retransmit, and set the retrans_stamp based on the timestamp of the fast recovery. We introduce a tcp_retrans_stamp_cleanup() helper, because this two-line sequence already appears in 3 places and is about to appear in 2 more as a result of this bug fix patch series. Once this bug fix patches series in the net branch makes it into the net-next branch we'll update the 3 other call sites to use the new helper. This is a long-standing issue. The Fixes tag below is chosen to be the oldest commit at which the patch will apply cleanly, which is from Linux v3.5 in 2012. Fixes: 1fbc340514fc ("tcp: early retransmit: tcp_enter_recovery()") Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Neal Cardwell <[email protected]> Date: Tue Oct 1 20:05:15 2024 +0000 tcp: fix to allow timestamp undo if no retransmits were sent [ Upstream commit e37ab7373696e650d3b6262a5b882aadad69bb9e ] Fix the TCP loss recovery undo logic in tcp_packet_delayed() so that it can trigger undo even if TSQ prevents a fast recovery episode from reaching tcp_retransmit_skb(). Geumhwan Yu <[email protected]> recently reported that after this commit from 2019: commit bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") ...and before this fix we could have buggy scenarios like the following: + Due to reordering, a TCP connection receives some SACKs and enters a spurious fast recovery. + TSQ prevents all invocations of tcp_retransmit_skb(), because many skbs are queued in lower layers of the sending machine's network stack; thus tp->retrans_stamp remains 0. + The connection receives a TCP timestamp ECR value echoing a timestamp before the fast recovery, indicating that the fast recovery was spurious. + The connection fails to undo the spurious fast recovery because tp->retrans_stamp is 0, and thus tcp_packet_delayed() returns false, due to the new logic in the 2019 commit: commit bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") This fix tweaks the logic to be more similar to the tcp_packet_delayed() logic before bc9f38c8328e, except that we take care not to be fooled by the FLAG_SYN_ACKED code path zeroing out tp->retrans_stamp (the bug noted and fixed by Yuchung in bc9f38c8328e). Note that this returns the high-level behavior of tcp_packet_delayed() to again match the comment for the function, which says: "Nothing was retransmitted or returned timestamp is less than timestamp of the first retransmission." Note that this comment is in the original 2005-04-16 Linux git commit, so this is evidently long-standing behavior. Fixes: bc9f38c8328e ("tcp: avoid unconditional congestion window undo on SYN retransmit") Reported-by: Geumhwan Yu <[email protected]> Diagnosed-by: Geumhwan Yu <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Simon Horman <[email protected]> Date: Thu Aug 1 19:35:37 2024 +0100 tipc: guard against string buffer overrun [ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ] Smatch reports that copying media_name and if_name to name_parts may overwrite the destination. .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16) .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16) This does seem to be the case so guard against this possibility by using strscpy() and failing if truncation occurs. Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge") Compile tested only. Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tetsuo Handa <[email protected]> Date: Wed Sep 25 22:30:59 2024 +0900 tomoyo: fallback to realpath if symlink's pathname does not exist commit ada1986d07976d60bed5017aa38b7f7cf27883f7 upstream. Alfred Agrell found that TOMOYO cannot handle execveat(AT_EMPTY_PATH) inside chroot environment where /dev and /proc are not mounted, for commit 51f39a1f0cea ("syscalls: implement execveat() system call") missed that TOMOYO tries to canonicalize argv[0] when the filename fed to the executed program as argv[0] is supplied using potentially nonexistent pathname. Since "/dev/fd/<fd>" already lost symlink information used for obtaining that <fd>, it is too late to reconstruct symlink's pathname. Although <filename> part of "/dev/fd/<fd>/<filename>" might not be canonicalized, TOMOYO cannot use tomoyo_realpath_nofollow() when /dev or /proc is not mounted. Therefore, fallback to tomoyo_realpath_from_path() when tomoyo_realpath_nofollow() failed. Reported-by: Alfred Agrell <[email protected]> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1082001 Fixes: 51f39a1f0cea ("syscalls: implement execveat() system call") Cc: [email protected] # v3.19+ Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhu Jun <[email protected]> Date: Wed Aug 28 02:31:29 2024 -0700 tools/iio: Add memory allocation failure check for trigger_name [ Upstream commit 3c6b818b097dd6932859bcc3d6722a74ec5931c1 ] Added a check to handle memory allocation failure for `trigger_name` and return `-ENOMEM`. Signed-off-by: Zhu Jun <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonathan McDowell <[email protected]> Date: Fri Aug 16 12:55:46 2024 +0100 tpm: Clean up TPM space after command failure [ Upstream commit e3aaebcbb7c6b403416f442d1de70d437ce313a7 ] tpm_dev_transmit prepares the TPM space before attempting command transmission. However if the command fails no rollback of this preparation is done. This can result in transient handles being leaked if the device is subsequently closed with no further commands performed. Fix this by flushing the space in the event of command transmission failure. Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Signed-off-by: Jonathan McDowell <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrii Nakryiko <[email protected]> Date: Tue Oct 8 15:29:48 2024 -0700 tracing/kprobes: Fix symbol counting logic by looking at modules as well commit 926fe783c8a64b33997fec405cf1af3e61aed441 upstream. Recent changes to count number of matching symbols when creating a kprobe event failed to take into account kernel modules. As such, it breaks kprobes on kernel module symbols, by assuming there is no match. Fix this my calling module_kallsyms_on_each_symbol() in addition to kallsyms_on_each_match_symbol() to perform a proper counting. Link: https://lore.kernel.org/all/[email protected]/ Cc: Francis Laniel <[email protected]> Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Steven Rostedt <[email protected]> Fixes: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Markus Boehme <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> [Sherry: It's a fix for previous backport, thus backport together] Signed-off-by: Sherry Yang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Francis Laniel <[email protected]> Date: Tue Oct 8 15:29:47 2024 -0700 tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols commit b022f0c7e404887a7c5229788fc99eff9f9a80d5 upstream. When a kprobe is attached to a function that's name is not unique (is static and shares the name with other functions in the kernel), the kprobe is attached to the first function it finds. This is a bug as the function that it is attaching to is not necessarily the one that the user wants to attach to. Instead of blindly picking a function to attach to what is ambiguous, error with EADDRNOTAVAIL to let the user know that this function is not unique, and that the user must use another unique function with an address offset to get to the function they want to attach to. Link: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Fixes: 413d37d1eb69 ("tracing: Add kprobe-based event tracer") Suggested-by: Masami Hiramatsu <[email protected]> Signed-off-by: Francis Laniel <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> [Sherry: 5.10.y added a new kselftest kprobe_non_uniq_symbol.tc by backporting commit 09bcf9254838 ("selftests/ftrace: Add new test case which checks non unique symbol"). However, 5.10.y didn't backport this commit which provides unique symbol check suppport from kernel side. Minor conflicts due to context change, ignore context change] Signed-off-by: Sherry Yang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Steven Rostedt (Google) <[email protected]> Date: Tue Feb 20 09:06:14 2024 -0500 tracing: Have saved_cmdlines arrays all in one allocation [ Upstream commit 0b18c852cc6fb8284ac0ab97e3e840974a6a8a64 ] The saved_cmdlines have three arrays for mapping PIDs to COMMs: - map_pid_to_cmdline[] - map_cmdline_to_pid[] - saved_cmdlines The map_pid_to_cmdline[] is PID_MAX_DEFAULT in size and holds the index into the other arrays. The map_cmdline_to_pid[] is a mapping back to the full pid as it can be larger than PID_MAX_DEFAULT. And the saved_cmdlines[] just holds the COMMs associated to the pids. Currently the map_pid_to_cmdline[] and saved_cmdlines[] are allocated together (in reality the saved_cmdlines is just in the memory of the rounding of the allocation of the structure as it is always allocated in powers of two). The map_cmdline_to_pid[] array is allocated separately. Since the rounding to a power of two is rather large (it allows for 8000 elements in saved_cmdlines), also include the map_cmdline_to_pid[] array. (This drops it to 6000 by default, which is still plenty for most use cases). This saves even more memory as the map_cmdline_to_pid[] array doesn't need to be allocated. Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Mark Rutland <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Tim Chen <[email protected]> Cc: Vincent Donnefort <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Mete Durlu <[email protected]> Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic") Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Steven Rostedt (Google) <[email protected]> Date: Mon Mar 4 17:43:41 2024 -0500 tracing: Remove precision vsnprintf() check from print event [ Upstream commit 5efd3e2aef91d2d812290dcb25b2058e6f3f532c ] This reverts 60be76eeabb3d ("tracing: Add size check when printing trace_marker output"). The only reason the precision check was added was because of a bug that miscalculated the write size of the string into the ring buffer and it truncated it removing the terminating nul byte. On reading the trace it crashed the kernel. But this was due to the bug in the code that happened during development and should never happen in practice. If anything, the precision can hide bugs where the string in the ring buffer isn't nul terminated and it will not be checked. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Linus Torvalds <[email protected]> Fixes: 60be76eeabb3d ("tracing: Add size check when printing trace_marker output") Reported-by: Sachin Sant <[email protected]> Tested-by: Sachin Sant <[email protected]> Reviewed-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Florian Fainelli <[email protected]> Date: Fri Sep 6 15:54:33 2024 -0700 tty: rp2: Fix reset with non forgiving PCIe host bridges commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream. The write to RP2_GLOBAL_CMD followed by an immediate read of RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write, however by then the device is already in reset and cannot respond to a memory cycle access. On platforms such as the Raspberry Pi 4 and others using the pcie-brcmstb.c driver, any memory access to a device that cannot respond is met with a fatal system error, rather than being substituted with all 1s as is usually the case on PC platforms. Swapping the delay and the read ensures that the device has finished resetting before we attempt to read from it. Fixes: 7d9f49afa451 ("serial: rp2: New driver for Comtrol RocketPort 2 cards") Cc: stable <[email protected]> Suggested-by: Jim Quinlan <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Gabriel Krisman Bertazi <[email protected]> Date: Tue Oct 8 18:43:16 2024 -0400 unicode: Don't special case ignorable code points commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91 upstream. We don't need to handle them separately. Instead, just let them decompose/casefold to themselves. Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oleg Nesterov <[email protected]> Date: Mon Oct 7 19:46:01 2024 +0200 uprobes: fix kernel info leak via "[uprobes]" vma commit 34820304cc2cd1804ee1f8f3504ec77813d29c8e upstream. xol_add_vma() maps the uninitialized page allocated by __create_xol_area() into userspace. On some architectures (x86) this memory is readable even without VM_READ, VM_EXEC results in the same pgprot_t as VM_EXEC|VM_READ, although this doesn't really matter, debugger can read this memory anyway. Link: https://lore.kernel.org/all/[email protected]/ Reported-by: Will Deacon <[email protected]> Fixes: d4b3b6384f98 ("uprobes/core: Allocate XOL slots for uprobes use") Cc: [email protected] Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Sep 12 14:32:59 2024 +0200 USB: appledisplay: close race between probe and completion handler commit 8265d06b7794493d82c5c21a12d7ba43eccc30cb upstream. There is a small window during probing when IO is running but the backlight is not registered. Processing events during that time will crash. The completion handler needs to check for a backlight before scheduling work. The bug is as old as the driver. Signed-off-by: Oliver Neukum <[email protected]> CC: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xu Yang <[email protected]> Date: Fri Aug 23 15:38:32 2024 +0800 usb: chipidea: udc: enable suspend interrupt after usb reset [ Upstream commit e4fdcc10092fb244218013bfe8ff01c55d54e8e4 ] Currently, suspend interrupt is enabled before pullup enable operation. This will cause a suspend interrupt assert right after pullup DP. This suspend interrupt is meaningless, so this will ignore such interrupt by enable it after usb reset completed. Signed-off-by: Xu Yang <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Sep 12 16:19:06 2024 +0200 USB: class: CDC-ACM: fix race between get_serial and set_serial commit b41c1fa155ba56d125885b0191aabaf3c508d0a3 upstream. TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns two values. Racing with set_serial it can return an inconsistent result. The mutex must be taken. In terms of logic the bug is as old as the driver. In terms of code it goes back to the conversion to the get_serial and set_serial methods. Signed-off-by: Oliver Neukum <[email protected]> Cc: stable <[email protected]> Fixes: 99f75a1fcd865 ("cdc-acm: switch to ->[sg]et_serial()") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Shawn Shao <[email protected]> Date: Fri Aug 30 11:17:09 2024 +0800 usb: dwc2: Adjust the timing of USB Driver Interrupt Registration in the Crashkernel Scenario [ Upstream commit 4058c39bd176daf11a826802d940d86292a6b02b ] The issue is that before entering the crash kernel, the DWC USB controller did not perform operations such as resetting the interrupt mask bits. After entering the crash kernel,before the USB interrupt handler registration was completed while loading the DWC USB driver,an GINTSTS_SOF interrupt was received.This triggered the misroute_irq process within the GIC handling framework,ultimately leading to the misrouting of the interrupt,causing it to be handled by the wrong interrupt handler and resulting in the issue. Summary:In a scenario where the kernel triggers a panic and enters the crash kernel,it is necessary to ensure that the interrupt mask bit is not enabled before the interrupt registration is complete. If an interrupt reaches the CPU at this moment,it will certainly not be handled correctly,especially in cases where this interrupt is reported frequently. Please refer to the Crashkernel dmesg information as follows (the message on line 3 was added before devm_request_irq is called by the dwc2_driver_probe function): [ 5.866837][ T1] dwc2 JMIC0010:01: supply vusb_d not found, using dummy regulator [ 5.874588][ T1] dwc2 JMIC0010:01: supply vusb_a not found, using dummy regulator [ 5.882335][ T1] dwc2 JMIC0010:01: before devm_request_irq irq: [71], gintmsk[0xf300080e], gintsts[0x04200009] [ 5.892686][ C0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-jmnd1.2_RC #18 [ 5.900327][ C0] Hardware name: CMSS HyperCard4-25G/HyperCard4-25G, BIOS 1.6.4 Jul 8 2024 [ 5.908836][ C0] Call trace: [ 5.911965][ C0] dump_backtrace+0x0/0x1f0 [ 5.916308][ C0] show_stack+0x20/0x30 [ 5.920304][ C0] dump_stack+0xd8/0x140 [ 5.924387][ C0] pcie_xxx_handler+0x3c/0x1d8 [ 5.930121][ C0] __handle_irq_event_percpu+0x64/0x1e0 [ 5.935506][ C0] handle_irq_event+0x80/0x1d0 [ 5.940109][ C0] try_one_irq+0x138/0x174 [ 5.944365][ C0] misrouted_irq+0x134/0x140 [ 5.948795][ C0] note_interrupt+0x1d0/0x30c [ 5.953311][ C0] handle_irq_event+0x13c/0x1d0 [ 5.958001][ C0] handle_fasteoi_irq+0xd4/0x260 [ 5.962779][ C0] __handle_domain_irq+0x88/0xf0 [ 5.967555][ C0] gic_handle_irq+0x9c/0x2f0 [ 5.971985][ C0] el1_irq+0xb8/0x140 [ 5.975807][ C0] __setup_irq+0x3dc/0x7cc [ 5.980064][ C0] request_threaded_irq+0xf4/0x1b4 [ 5.985015][ C0] devm_request_threaded_irq+0x80/0x100 [ 5.990400][ C0] dwc2_driver_probe+0x1b8/0x6b0 [ 5.995178][ C0] platform_drv_probe+0x5c/0xb0 [ 5.999868][ C0] really_probe+0xf8/0x51c [ 6.004125][ C0] driver_probe_device+0xfc/0x170 [ 6.008989][ C0] device_driver_attach+0xc8/0xd0 [ 6.013853][ C0] __driver_attach+0xe8/0x1b0 [ 6.018369][ C0] bus_for_each_dev+0x7c/0xdc [ 6.022886][ C0] driver_attach+0x2c/0x3c [ 6.027143][ C0] bus_add_driver+0xdc/0x240 [ 6.031573][ C0] driver_register+0x80/0x13c [ 6.036090][ C0] __platform_driver_register+0x50/0x5c [ 6.041476][ C0] dwc2_platform_driver_init+0x24/0x30 [ 6.046774][ C0] do_one_initcall+0x50/0x25c [ 6.051291][ C0] do_initcall_level+0xe4/0xfc [ 6.055894][ C0] do_initcalls+0x80/0xa4 [ 6.060064][ C0] kernel_init_freeable+0x198/0x240 [ 6.065102][ C0] kernel_init+0x1c/0x12c Signed-off-by: Shawn Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Piyush Mehta <[email protected]> Date: Tue Sep 20 10:52:35 2022 +0530 usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug [ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ] When configured in HOST mode, after issuing U3/L2 exit controller fails to send proper CRC checksum in CRC5 field. Because of this behavior Transaction Error is generated, resulting in reset and re-enumeration of usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this problem. When this bit is set to '1', the UTMI/ULPI opmode will be changed to "normal" along with HS terminations, term, and xcvr signals after EOR. This option is to support certain legacy UTMI/ULPI PHYs. Added "snps,resume-hs-terminations" quirk to resolved the above issue. Signed-off-by: Piyush Mehta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 9149c9b0c7e0 ("usb: dwc3: core: update LC timer as per USB Spec V3.2") Signed-off-by: Sasha Levin <[email protected]>
Author: Selvarasu Ganesan <[email protected]> Date: Tue Sep 17 04:48:09 2024 +0530 usb: dwc3: core: Stop processing of pending events if controller is halted commit 0d410e8913f5cffebcca79ffdd596009d4a13a28 upstream. This commit addresses an issue where events were being processed when the controller was in a halted state. To fix this issue by stop processing the events as the event count was considered stale or invalid when the controller was halted. Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Cc: [email protected] Signed-off-by: Selvarasu Ganesan <[email protected]> Suggested-by: Thinh Nguyen <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Faisal Hassan <[email protected]> Date: Thu Aug 29 15:15:02 2024 +0530 usb: dwc3: core: update LC timer as per USB Spec V3.2 [ Upstream commit 9149c9b0c7e046273141e41eebd8a517416144ac ] This fix addresses STAR 9001285599, which only affects DWC_usb3 version 3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19], the link compliance test (TD7.21) may fail. If the ECN is not enabled (GUCTL2[19] = 0), the controller will use the old timer value (5us), which is still acceptable for the link compliance test. Therefore, clear GUCTL2[19] to pass the USB link compliance test: TD 7.21. Cc: [email protected] Signed-off-by: Faisal Hassan <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jack Pham <[email protected]> Date: Thu Aug 12 01:26:35 2021 -0700 usb: dwc3: Decouple USB 2.0 L1 & L2 events [ Upstream commit 843714bb37d9a3780160d7b4a4a72b8077a77589 ] On DWC_usb3 revisions 3.00a and newer (including DWC_usb31 and DWC_usb32) the GUCTL1 register gained the DEV_DECOUPLE_L1L2_EVT field (bit 31) which when enabled allows the controller in device mode to treat USB 2.0 L1 LPM & L2 events separately. After commit d1d90dd27254 ("usb: dwc3: gadget: Enable suspend events") the controller will now receive events (and therefore interrupts) for every state change when entering/exiting either L1 or L2 states. Since L1 is handled entirely by the hardware and requires no software intervention, there is no need to even enable these events and unnecessarily notify the gadget driver. Enable the aforementioned bit to help reduce the overall interrupt count for these L1 events that don't need to be handled while retaining the events for full L2 suspend/wakeup. Tested-by: Jun Li <[email protected]> Tested-by: Amit Pundir <[email protected]> # for RB5 (sm8250) Tested-by: John Stultz <[email protected]> # for HiKey960 & db845c Reviewed-by: Jun Li <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Jack Pham <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 9149c9b0c7e0 ("usb: dwc3: core: update LC timer as per USB Spec V3.2") Signed-off-by: Sasha Levin <[email protected]>
Author: Vincenzo Palazzo <[email protected]> Date: Thu Mar 2 16:07:06 2023 +0100 usb: dwc3: Fix a typo in field name commit 02c1820345e795148e6b497ef85090915401698e upstream. Fix a typo inside the dwc3 struct docs. Fixes: 63d7f9810a38 ("usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug") Signed-off-by: Vincenzo Palazzo <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Sep 12 14:54:43 2024 +0200 USB: misc: cypress_cy7c63: check for short transfer commit 49cd2f4d747eeb3050b76245a7f72aa99dbd3310 upstream. As we process the second byte of a control transfer, transfers of less than 2 bytes must be discarded. This bug is as old as the driver. SIgned-off-by: Oliver Neukum <[email protected]> CC: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Sep 12 15:21:22 2024 +0200 USB: misc: yurex: fix race between read and write [ Upstream commit 93907620b308609c72ba4b95b09a6aa2658bb553 ] The write code path touches the bbu member in a non atomic manner without taking the spinlock. Fix it. The bug is as old as the driver. Signed-off-by: Oliver Neukum <[email protected]> CC: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Moritz Fischer <[email protected]> Date: Sat Jul 17 18:51:11 2021 -0700 usb: renesas-xhci: Remove renesas_xhci_pci_exit() [ Upstream commit 884c274408296e7e0f56545f909b3d3a671104aa ] Remove empty function renesas_xhci_pci_exit() that does not actually do anything. Cc: Mathias Nyman <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Vinod Koul <[email protected]> Signed-off-by: Moritz Fischer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: f81dfa3b57c6 ("xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.") Signed-off-by: Sasha Levin <[email protected]>
Author: Junhao Xie <[email protected]> Date: Tue Sep 3 23:06:38 2024 +0800 USB: serial: pl2303: add device id for Macrosilicon MS3020 commit 7d47d22444bb7dc1b6d768904a22070ef35e1fc0 upstream. Add the device id for the Macrosilicon MS3020 which is a PL2303HXN based device. Signed-off-by: Junhao Xie <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Icenowy Zheng <[email protected]> Date: Tue Oct 1 16:34:07 2024 +0800 usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip commit a6555cb1cb69db479d0760e392c175ba32426842 upstream. JieLi tends to use SCSI via USB Mass Storage to implement their own proprietary commands instead of implementing another USB interface. Enumerating it as a generic mass storage device will lead to a Hardware Error sense key get reported. Ignore this bogus device to prevent appearing a unusable sdX device file. Signed-off-by: Icenowy Zheng <[email protected]> Cc: stable <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Edward Adam Davis <[email protected]> Date: Sun Sep 8 17:17:41 2024 +0800 USB: usbtmc: prevent kernel-usb-infoleak commit 625fa77151f00c1bd00d34d60d6f2e710b3f9aad upstream. The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. Fixes: 4ddc645f40e9 ("usb: usbtmc: Add ioctl for vendor specific write") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=9d34f80f841e948c3fdb Signed-off-by: Edward Adam Davis <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jose Alberto Reguero <[email protected]> Date: Thu Sep 19 20:42:02 2024 +0200 usb: xhci: Fix problem with xhci resume from suspend commit d44238d8254a36249d576c96473269dbe500f5e4 upstream. I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD, and other from ASMEDIA. The one from ASMEDIA have problems when resume from suspend, and keep broken until unplug the power cord. I use this kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a path to reset only the ASMEDIA xhci. Signed-off-by: Jose Alberto Reguero <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Harshit Mogalapalli <[email protected]> Date: Mon Dec 18 22:36:35 2023 -0800 usb: yurex: Fix inconsistent locking bug in yurex_read() commit e7d3b9f28654dbfce7e09f8028210489adaf6a33 upstream. Unlock before returning on the error path. Fixes: 86b20af11e84 ("usb: yurex: Replace snprintf() with the safer scnprintf() variant") Reported-by: Dan Carpenter <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Harshit Mogalapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lee Jones <[email protected]> Date: Wed Dec 13 16:42:37 2023 +0000 usb: yurex: Replace snprintf() with the safer scnprintf() variant [ Upstream commit 86b20af11e84c26ae3fde4dcc4f490948e3f8035 ] There is a general misunderstanding amongst engineers that {v}snprintf() returns the length of the data *actually* encoded into the destination array. However, as per the C99 standard {v}snprintf() really returns the length of the data that *would have been* written if there were enough space for it. This misunderstanding has led to buffer-overruns in the past. It's generally considered safer to use the {v}scnprintf() variants in their place (or even sprintf() in simple cases). So let's do that. Whilst we're at it, let's define some magic numbers to increase readability and ease of maintenance. Link: https://lwn.net/Articles/69419/ Link: https://github.com/KSPP/linux/issues/105 Cc: Tomoki Sekiyama <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 93907620b308 ("USB: misc: yurex: fix race between read and write") Signed-off-by: Sasha Levin <[email protected]>
Author: Foster Snowhill <[email protected]> Date: Tue Aug 6 19:28:09 2024 +0200 usbnet: ipheth: fix carrier detection in modes 1 and 4 [ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ] Apart from the standard "configurations", "interfaces" and "alternate interface settings" in USB, iOS devices also have a notion of "modes". In different modes, the device exposes a different set of available configurations. Depending on the iOS version, and depending on the current mode, the length and contents of the carrier state control message differs: * 1 byte (seen on iOS 4.2.1, 8.4): * 03: carrier off (mode 0) * 04: carrier on (mode 0) * 3 bytes (seen on iOS 10.3.4, 15.7.6): * 03 03 03: carrier off (mode 0) * 04 04 03: carrier on (mode 0) * 4 bytes (seen on iOS 16.5, 17.6): * 03 03 03 00: carrier off (mode 0) * 04 03 03 00: carrier off (mode 1) * 06 03 03 00: carrier off (mode 4) * 04 04 03 04: carrier on (mode 0 and 1) * 06 04 03 04: carrier on (mode 4) Before this change, the driver always used the first byte of the response to determine carrier state. From this larger sample, the first byte seems to indicate the number of available USB configurations in the current mode (with the exception of the default mode 0), and in some cases (namely mode 1 and 4) does not correlate with the carrier state. Previous logic erroneously counted `04 03 03 00` as "carrier on" and `06 04 03 04` as "carrier off" on iOS versions that support mode 1 and mode 4 respectively. Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for the ipheth driver. Check the second byte of the control message where possible, and fall back to checking the first byte on older iOS versions. Signed-off-by: Foster Snowhill <[email protected]> Tested-by: Georgi Valkov <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xie Yongji <[email protected]> Date: Thu Mar 23 13:30:40 2023 +0800 vdpa: Add eventfd for the vdpa callback [ Upstream commit 5e68470f4e80a4120e9ecec408f6ab4ad386bd4a ] Add eventfd for the vdpa callback so that user can signal it directly instead of triggering the callback. It will be used for vhost-vdpa case. Signed-off-by: Xie Yongji <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Stable-dep-of: 02e9e9366fef ("vhost_vdpa: assign irq bypass producer token correctly") Signed-off-by: Sasha Levin <[email protected]>
Author: Julian Sun <[email protected]> Date: Fri Aug 23 21:07:30 2024 +0800 vfs: fix race between evice_inodes() and find_inode()&iput() commit 88b1afbf0f6b221f6c5bb66cc80cd3b38d696687 upstream. Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/[email protected]/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=67ba3c42bcbb4665d3ad CC: [email protected] Fixes: 63997e98a3be ("split invalidate_inodes()") Signed-off-by: Julian Sun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Haoran Zhang <[email protected]> Date: Tue Oct 1 15:14:15 2024 -0500 vhost/scsi: null-ptr-dereference in vhost_scsi_get_req() commit 221af82f606d928ccef19a16d35633c63026f1be upstream. Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") a null pointer dereference bug can be triggered when guest sends an SCSI AN request. In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with `&v_req.tmf.lun[1]` within a switch-case block and is then passed to vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is set to NULL in this branch. Later, in vhost_scsi_get_req(), `vc->target` is dereferenced without being checked, leading to a null pointer dereference bug. This bug can be triggered from guest. When this bug occurs, the vhost_worker process is killed while holding `vq->mutex` and the corresponding tpg will remain occupied indefinitely. Below is the KASAN report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vhost_scsi_get_req+0x165/0x3a0 Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00 RSP: 0018:ffff888017affb50 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8 RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000 FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0 Call Trace: <TASK> ? show_regs+0x86/0xa0 ? die_addr+0x4b/0xd0 ? exc_general_protection+0x163/0x260 ? asm_exc_general_protection+0x27/0x30 ? vhost_scsi_get_req+0x165/0x3a0 vhost_scsi_ctl_handle_vq+0x2a4/0xca0 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10 ? __switch_to+0x721/0xeb0 ? __schedule+0xda5/0x5710 ? __kasan_check_write+0x14/0x30 ? _raw_spin_lock+0x82/0xf0 vhost_scsi_ctl_handle_kick+0x52/0x90 vhost_run_work_list+0x134/0x1b0 vhost_task_fn+0x121/0x350 ... </TASK> ---[ end trace 0000000000000000 ]--- Let's add a check in vhost_scsi_get_req. Fixes: 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") Signed-off-by: Haoran Zhang <[email protected]> [whitespace fixes] Signed-off-by: Mike Christie <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jason Wang <[email protected]> Date: Fri Aug 16 11:19:00 2024 +0800 vhost_vdpa: assign irq bypass producer token correctly [ Upstream commit 02e9e9366fefe461719da5d173385b6685f70319 ] We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. Reported-by: Dragos Tatulea <[email protected]> Tested-by: Dragos Tatulea <[email protected]> Reviewed-by: Dragos Tatulea <[email protected]> Fixes: 2cf1ba9a4d15 ("vhost_vdpa: implement IRQ offloading in vhost_vdpa") Signed-off-by: Jason Wang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michael S. Tsirkin <[email protected]> Date: Mon Sep 16 14:16:44 2024 -0400 virtio_console: fix misc probe bugs [ Upstream commit b9efbe2b8f0177fa97bfab290d60858900aa196b ] This fixes the following issue discovered by code review: after vqs have been created, a buggy device can send an interrupt. A control vq callback will then try to schedule control_work which has not been initialized yet. Similarly for config interrupt. Further, in and out vq callbacks invoke find_port_by_vq which attempts to take ports_lock which also has not been initialized. To fix, init all locks and work before creating vqs. Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com> Fixes: 17634ba25544 ("virtio: console: Add a new MULTIPORT feature, support for generic ports") Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Philip Chen <[email protected]> Date: Mon Aug 26 21:53:13 2024 +0000 virtio_pmem: Check device status before requesting flush [ Upstream commit e25fbcd97cf52c3c9824d44b5c56c19673c3dd50 ] If a pmem device is in a bad status, the driver side could wait for host ack forever in virtio_pmem_flush(), causing the system to hang. So add a status check in the beginning of virtio_pmem_flush() to return early if the device is not activated. Signed-off-by: Philip Chen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Pankaj Gupta <[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Blixt <[email protected]> Date: Thu Aug 1 14:18:45 2024 +0200 watchdog: imx_sc_wdt: Don't disable WDT in suspend [ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ] Parts of the suspend and resume chain is left unprotected if we disable the WDT here. >From experiments we can see that the SCU disables and re-enables the WDT when we enter and leave suspend to ram. By not touching the WDT here we are protected by the WDT all the way to the SCU. Signed-off-by: Jonas Blixt <[email protected]> CC: Anson Huang <[email protected]> Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support") Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Karthikeyan Periyasamy <[email protected]> Date: Thu Jul 4 12:38:11 2024 +0530 wifi: ath11k: fix array out-of-bound access in SoC stats [ Upstream commit 69f253e46af98af17e3efa3e5dfa72fcb7d1983d ] Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx() function access ath11k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath11k_dp_process_rx() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Kandybka <[email protected]> Date: Thu Jul 25 14:17:43 2024 +0300 wifi: ath9k: fix possible integer overflow in ath9k_get_et_stats() [ Upstream commit 3f66f26703093886db81f0610b97a6794511917c ] In 'ath9k_get_et_stats()', promote TX stats counters to 'u64' to avoid possible integer overflow. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Kandybka <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Toke Høiland-Jørgensen <[email protected]> Date: Mon Aug 12 16:24:46 2024 +0200 wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit [ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ] Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. Reported-by: [email protected] Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Mon Sep 9 12:08:06 2024 +0300 wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors [ Upstream commit 15ea13b1b1fbf6364d4cd568e65e4c8479632999 ] Although not reproduced in practice, these two cases may be considered by UBSAN as off-by-one errors. So fix them in the same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan()"). Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans") Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request") Signed-off-by: Dmitry Antipov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Thu Sep 5 18:04:00 2024 +0300 wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan() [ Upstream commit a26a5107bc52922cf5f67361e307ad66547b51c7 ] Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819 and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the following: [ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25 [ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]' <...skipped...> [ T4985] Call Trace: [ T4985] <TASK> [ T4985] dump_stack_lvl+0x1c2/0x2a0 [ T4985] ? __pfx_dump_stack_lvl+0x10/0x10 [ T4985] ? __pfx__printk+0x10/0x10 [ T4985] __ubsan_handle_out_of_bounds+0x127/0x150 [ T4985] cfg80211_wext_siwscan+0x11a4/0x1260 <...the rest is not too useful...> Even if we do 'creq->n_channels = n_channels' before 'creq->ssids = (void *)&creq->channels[n_channels]', UBSAN treats the latter as off-by-one error. Fix this by using pointer arithmetic rather than an expression with explicit array indexing and use convenient 'struct_size()' to simplify the math here and in 'kzalloc()' above. Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request") Signed-off-by: Dmitry Antipov <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://patch.msgid.link/[email protected] [fix coding style for multi-line calculation] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Berg <[email protected]> Date: Sun Aug 25 19:17:13 2024 +0300 wifi: iwlwifi: lower message level for FW buffer destination [ Upstream commit f8a129c1e10256c785164ed5efa5d17d45fbd81b ] An invalid buffer destination is not a problem for the driver and it does not make sense to report it with the KERN_ERR message level. As such, change the message to use IWL_DEBUG_FW. Reported-by: Len Brown <[email protected]> Closes: https://lore.kernel.org/r/CAJvTdKkcxJss=DM2sxgv_MR5BeZ4_OC-3ad6tA40TYH2yqHCWw@mail.gmail.com Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240825191257.20abf78f05bc.Ifbcecc2ae9fb40b9698302507dcba8b922c8d856@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Emmanuel Grumbach <[email protected]> Date: Sun Aug 25 19:17:04 2024 +0300 wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead [ Upstream commit 3a84454f5204718ca5b4ad2c1f0bf2031e2403d1 ] There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was recently converted from just a message), that can be hit if we wait for TX queues to become empty after firmware died. Clearly, we can't expect anything from the firmware after it's declared dead. Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could be a good idea to stop the flow earlier, the flush functions do some maintenance work that is not related to the firmware, so keep that part of the code running even when the firmware is not running. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid [edit commit message] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Fri Sep 6 15:31:51 2024 +0300 wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() [ Upstream commit 9d301de12da6e1bb069a9835c38359b8e8135121 ] Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. Fixes: 5061b0c2b906 ("mac80211: cooperate more with network namespaces") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819 Signed-off-by: Dmitry Antipov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Howard Hsu <[email protected]> Date: Tue Aug 27 11:30:08 2024 +0200 wifi: mt76: mt7915: fix rx filter setting for bfee functionality [ Upstream commit 6ac80fce713e875a316a58975b830720a3e27721 ] Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Howard Hsu <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gustavo A. R. Silva <[email protected]> Date: Wed Aug 21 15:23:51 2024 -0600 wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() [ Upstream commit 498365e52bebcbc36a93279fe7e9d6aec8479cee ] Replace one-element array with a flexible-array member in `struct host_cmd_ds_802_11_scan_ext`. With this, fix the following warning: elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------ elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1) elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex] Reported-by: Andy Shevchenko <[email protected]> Closes: https://lore.kernel.org/linux-hardening/[email protected]/ Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto Signed-off-by: Sasha Levin <[email protected]>
Author: Bitterblue Smith <[email protected]> Date: Tue Jul 23 22:31:36 2024 +0300 wifi: rtw88: 8822c: Fix reported RX band width commit a71ed5898dfae68262f79277915d1dfe34586bc6 upstream. "iw dev wlp2s0 station dump" shows incorrect rx bitrate: tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1 This is because the RX band width is calculated incorrectly. Fix the calculation according to the phydm_rxsc_2_bw() function from the official drivers. After: tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2 rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1 It also works correctly with the AP configured for 20 MHz and 40 MHz. Tested with RTL8822CE. Cc: [email protected] Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Bitterblue Smith <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Fri Jul 26 14:46:57 2024 +0300 wifi: rtw88: always wait for both firmware loading attempts [ Upstream commit 0e735a4c6137262bcefe45bb52fde7b1f5fc6c4d ] In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN. Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6c6c08700f9480c41fe3 Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Zong-Zhe Yang <[email protected]> Date: Thu Jul 18 15:06:15 2024 +0800 wifi: rtw88: select WANT_DEV_COREDUMP [ Upstream commit 7e989b0c1e33210c07340bf5228aa83ea52515b5 ] We have invoked device coredump when fw crash. Should select WANT_DEV_COREDUMP by ourselves. Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Jiawei Ye <[email protected]> Date: Thu Aug 29 08:17:09 2024 +0000 wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param [ Upstream commit 6d7c6ae1efb1ff68bc01d79d94fdf0388f86cdd8 ] In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path") Signed-off-by: Jiawei Ye <[email protected]> Reviewed-by: Alexis Lothoré <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Kelley <[email protected]> Date: Wed Jun 5 19:55:59 2024 -0700 x86/hyperv: Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency [ Upstream commit 8fcc514809de41153b43ccbe1a0cdf7f72b78e7e ] A Linux guest on Hyper-V gets the TSC frequency from a synthetic MSR, if available. In this case, set X86_FEATURE_TSC_KNOWN_FREQ so that Linux doesn't unnecessarily do refined TSC calibration when setting up the TSC clocksource. With this change, a message such as this is no longer output during boot when the TSC is used as the clocksource: [ 1.115141] tsc: Refined TSC clocksource calibration: 2918.408 MHz Furthermore, the guest and host will have exactly the same view of the TSC frequency, which is important for features such as the TSC deadline timer that are emulated by the Hyper-V host. Signed-off-by: Michael Kelley <[email protected]> Reviewed-by: Roman Kisel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Message-ID: <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peter Zijlstra <[email protected]> Date: Tue Mar 8 16:30:29 2022 +0100 x86/ibt,ftrace: Search for __fentry__ location commit aebfd12521d9c7d0b502cf6d06314cfbcdccfe3b upstream. Currently a lot of ftrace code assumes __fentry__ is at sym+0. However with Intel IBT enabled the first instruction of a function will most likely be ENDBR. Change ftrace_location() to not only return the __fentry__ location when called for the __fentry__ location, but also when called for the sym+0 location. Then audit/update all callsites of this function to consistently use these new semantics. Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: e60b613df8b6 ("ftrace: Fix possible use-after-free issue in ftrace_location()") [Shivani: Modified to apply on v5.10.y] Signed-off-by: Shivani Agarwal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tony Luck <[email protected]> Date: Wed Apr 24 11:15:18 2024 -0700 x86/mm: Switch to new Intel CPU model defines commit 2eda374e883ad297bd9fe575a16c1dc850346075 upstream. New CPU #defines encode vendor and family as well as model. [ dhansen: vertically align 0's in invlpg_miss_ids[] ] Signed-off-by: Tony Luck <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com [ Ricardo: I used the old match macro X86_MATCH_INTEL_FAM6_MODEL() instead of X86_MATCH_VFM() as in the upstream commit. I also kept the ALDERLAKE_N name instead of ATOM_GRACEMONT. Both refer to the same CPU model. ] Signed-off-by: Ricardo Neri <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kees Cook <[email protected]> Date: Mon Jul 8 13:22:06 2024 -0700 x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments() [ Upstream commit d19d638b1e6cf746263ef60b7d0dee0204d8216a ] Modern (fortified) memcpy() prefers to avoid writing (or reading) beyond the end of the addressed destination (or source) struct member: In function ‘fortify_memcpy_chk’, inlined from ‘syscall_get_arguments’ at ./arch/x86/include/asm/syscall.h:85:2, inlined from ‘populate_seccomp_data’ at kernel/seccomp.c:258:2, inlined from ‘__seccomp_filter’ at kernel/seccomp.c:1231:3: ./include/linux/fortify-string.h:580:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 580 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ As already done for x86_64 and compat mode, do not use memcpy() to extract syscall arguments from struct pt_regs but rather just perform direct assignments. Binary output differences are negligible, and actually ends up using less stack space: - sub $0x84,%esp + sub $0x6c,%esp and less text size: text data bss dec hex filename 10794 252 0 11046 2b26 gcc-32b/kernel/seccomp.o.stock 10714 252 0 10966 2ad6 gcc-32b/kernel/seccomp.o.after Closes: https://lore.kernel.org/lkml/[email protected]/ Reported-by: Mirsad Todorovac <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Acked-by: Dave Hansen <[email protected]> Tested-by: Mirsad Todorovac <[email protected]> Link: https://lore.kernel.org/all/20240708202202.work.477-kees%40kernel.org Signed-off-by: Sasha Levin <[email protected]>
Author: Juergen Gross <[email protected]> Date: Fri Sep 13 12:05:02 2024 +0200 xen/swiotlb: add alignment check for dma buffers [ Upstream commit 9f40ec84a7976d95c34e7cc070939deb103652b0 ] When checking a memory buffer to be consecutive in machine memory, the alignment needs to be checked, too. Failing to do so might result in DMA memory not being aligned according to its requested size, leading to error messages like: 4xxx 0000:2b:00.0: enabling device (0140 -> 0142) 4xxx 0000:2b:00.0: Ring address not aligned 4xxx 0000:2b:00.0: Failed to initialise service qat_crypto 4xxx 0000:2b:00.0: Resetting device qat_dev0 4xxx: probe of 0000:2b:00.0 failed with error -14 Fixes: 9435cce87950 ("xen/swiotlb: Add support for 64KB page granularity") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Juergen Gross <[email protected]> Date: Sat Aug 3 08:01:22 2024 +0200 xen: use correct end address of kernel for conflict checking [ Upstream commit fac1bceeeb04886fc2ee952672e6e6c85ce41dca ] When running as a Xen PV dom0 the kernel is loaded by the hypervisor using a different memory map than that of the host. In order to minimize the required changes in the kernel, the kernel adapts its memory map to that of the host. In order to do that it is checking for conflicts of its load address with the host memory map. Unfortunately the tested memory range does not include the .brk area, which might result in crashes or memory corruption when this area does conflict with the memory map of the host. Fix the test by using the _end label instead of __bss_stop. Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout") Signed-off-by: Juergen Gross <[email protected]> Tested-by: Marek Marczykowski-Górecki <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Ahern <[email protected]> Date: Fri Apr 1 12:58:37 2022 -0600 xfrm: Pass flowi_oif or l3mdev as oif to xfrm_dst_lookup commit 748b82c23e25310fec54e1eff2cb63936f391b24 upstream. The commit referenced in the Fixes tag no longer changes the flow oif to the l3mdev ifindex. A xfrm use case was expecting the flowi_oif to be the VRF if relevant and the change broke that test. Update xfrm_bundle_create to pass oif if set and any potential flowi_l3mdev if oif is not set. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: kernel test robot <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mathias Nyman <[email protected]> Date: Thu Sep 5 17:32:59 2024 +0300 xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them. [ Upstream commit f81dfa3b57c624c56f2bff171c431bc7f5b558f2 ] PCI xHC host should be stopped and xhci driver memory freed before putting host to PCI D3 state during PCI remove callback. Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around and set the host to D3 before calling usb_hcd_pci_remove(dev), which will access the host to stop it, and then free xhci. Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci") Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lasse Collin <[email protected]> Date: Sun Jul 21 16:36:24 2024 +0300 xz: cleanup CRC32 edits from 2018 [ Upstream commit 2ee96abef214550d9e92f5143ee3ac1fd1323e67 ] In 2018, a dependency on <linux/crc32poly.h> was added to avoid duplicating the same constant in multiple files. Two months later it was found to be a bad idea and the definition of CRC32_POLY_LE macro was moved into xz_private.h to avoid including <linux/crc32poly.h>. xz_private.h is a wrong place for it too. Revert back to the upstream version which has the poly in xz_crc32_init() in xz_crc32.c. Link: https://lkml.kernel.org/r/[email protected] Fixes: faa16bc404d7 ("lib: Use existing define with polynomial") Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h") Signed-off-by: Lasse Collin <[email protected]> Reviewed-by: Sam James <[email protected]> Tested-by: Michael Ellerman <[email protected]> (powerpc) Cc: Krzysztof Kozlowski <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Joel Stanley <[email protected]> Cc: Albert Ou <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Emil Renner Berthing <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Jubin Zhong <[email protected]> Cc: Jules Maselbas <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Rui Li <[email protected]> Cc: Simon Glass <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>