Author: Sergey Shtylyov <[email protected]> Date: Sat Feb 19 20:44:43 2022 +0300 ata: pata_hpt37x: disable primary channel on HPT371 commit 8d093e02e898b24c58788b0289e3202317a96d2a upstream. The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel. Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: [email protected] Signed-off-by: Sergey Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Manish Chopra <[email protected]> Date: Wed Feb 23 00:57:20 2022 -0800 bnx2x: fix driver load from initrd commit e13ad1443684f7afaff24cf207e85e97885256bd upstream. Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627 Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: Alok Prasad <[email protected]> Signed-off-by: Ariel Elior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Somnath Kotur <[email protected]> Date: Sun Feb 20 04:05:47 2022 -0500 bnxt_en: Fix active FEC reporting to ethtool commit 84d3c83e6ea7d46cf3de3a54578af73eb24a64f2 upstream. ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pavan Chebbi <[email protected]> Date: Sun Feb 20 04:05:50 2022 -0500 bnxt_en: Fix incorrect multicast rx mask setting when not requested commit 8cdb15924252e27af16c4a8fe0fc606ce5fd04dc upstream. We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd7a32 ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Michael Chan <[email protected]> Date: Sun Feb 20 04:05:48 2022 -0500 bnxt_en: Fix offline ethtool selftest with RDMA enabled commit 6758f937669dba14c6aac7ca004edda42ec1b18d upstream. For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by: Edwin Peer <[email protected]> Reviewed-by: Ben Li <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Michael Chan <[email protected]> Date: Sun Feb 20 04:05:52 2022 -0500 bnxt_en: Increase firmware message response DMA wait time [ Upstream commit b891106da52b2c12dbaf73400f6d225b06a38d80 ] When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by: Vladimir Olovyannikov <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Thu Feb 17 10:19:02 2022 -0800 bpf: Add schedule points in batch ops commit 75134f16e7dd0007aa474b281935c5f42e79f2c8 upstream. syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Stanislav Fomichev <[email protected]> Acked-by: Brian Vazquez <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Felix Maurer <[email protected]> Date: Wed Feb 9 16:55:26 2022 +0100 bpf: Do not try bpf_msg_push_data with len 0 commit 4a11678f683814df82fca9018d964771e02d7e6d upstream. If bpf_msg_push_data() is called with len 0 (as it happens during selftests/bpf/test_sockmap), we do not need to do anything and can return early. Calling bpf_msg_push_data() with len 0 previously lead to a wrong ENOMEM error: we later called get_order(copy + len); if len was 0, copy + len was also often 0 and get_order() returned some undefined value (at the moment 52). alloc_pages() caught that and failed, but then bpf_msg_push_data() returned ENOMEM. This was wrong because we are most probably not out of memory and actually do not need any additional memory. Fixes: 6fff607e2f14b ("bpf: sk_msg program helper bpf_msg_push_data") Signed-off-by: Felix Maurer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/df69012695c7094ccb1943ca02b4920db3537466.1644421921.git.fmaurer@redhat.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yonghong Song <[email protected]> Date: Fri Feb 11 11:49:53 2022 -0800 bpf: Fix a bpf_timer initialization issue commit 5eaed6eedbe9612f642ad2b880f961d1c6c8ec2b upstream. The patch in [1] intends to fix a bpf_timer related issue, but the fix caused existing 'timer' selftest to fail with hang or some random errors. After some debug, I found an issue with check_and_init_map_value() in the hashtab.c. More specifically, in hashtab.c, we have code l_new = bpf_map_kmalloc_node(&htab->map, ...) check_and_init_map_value(&htab->map, l_new...) Note that bpf_map_kmalloc_node() does not do initialization so l_new contains random value. The function check_and_init_map_value() intends to zero the bpf_spin_lock and bpf_timer if they exist in the map. But I found bpf_spin_lock is zero'ed but bpf_timer is not zero'ed. With [1], later copy_map_value() skips copying of bpf_spin_lock and bpf_timer. The non-zero bpf_timer caused random failures for 'timer' selftest. Without [1], for both bpf_spin_lock and bpf_timer case, bpf_timer will be zero'ed, so 'timer' self test is okay. For check_and_init_map_value(), why bpf_spin_lock is zero'ed properly while bpf_timer not. In bpf uapi header, we have struct bpf_spin_lock { __u32 val; }; struct bpf_timer { __u64 :64; __u64 :64; } __attribute__((aligned(8))); The initialization code: *(struct bpf_spin_lock *)(dst + map->spin_lock_off) = (struct bpf_spin_lock){}; *(struct bpf_timer *)(dst + map->timer_off) = (struct bpf_timer){}; It appears the compiler has no obligation to initialize anonymous fields. For example, let us use clang with bpf target as below: $ cat t.c struct bpf_timer { unsigned long long :64; }; struct bpf_timer2 { unsigned long long a; }; void test(struct bpf_timer *t) { *t = (struct bpf_timer){}; } void test2(struct bpf_timer2 *t) { *t = (struct bpf_timer2){}; } $ clang -target bpf -O2 -c -g t.c $ llvm-objdump -d t.o ... 0000000000000000 <test>: 0: 95 00 00 00 00 00 00 00 exit 0000000000000008 <test2>: 1: b7 02 00 00 00 00 00 00 r2 = 0 2: 7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2 3: 95 00 00 00 00 00 00 00 exit gcc11.2 does not have the above issue. But from INTERNATIONAL STANDARD ©ISO/IEC ISO/IEC 9899:201x Programming languages — C http://www.open-std.org/Jtc1/sc22/wg14/www/docs/n1547.pdf page 157: Except where explicitly stated otherwise, for the purposes of this subclause unnamed members of objects of structure and union type do not participate in initialization. Unnamed members of structure objects have indeterminate value even after initialization. To fix the problem, let use memset for bpf_timer case in check_and_init_map_value(). For consistency, memset is also used for bpf_spin_lock case. [1] https://lore.kernel.org/bpf/[email protected]/ Fixes: 68134668c17f3 ("bpf: Add map side support for bpf timers.") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kumar Kartikeya Dwivedi <[email protected]> Date: Wed Feb 9 12:33:23 2022 +0530 bpf: Fix crash due to incorrect copy_map_value commit a8abb0c3dc1e28454851a00f8b7333d9695d566c upstream. When both bpf_spin_lock and bpf_timer are present in a BPF map value, copy_map_value needs to skirt both objects when copying a value into and out of the map. However, the current code does not set both s_off and t_off in copy_map_value, which leads to a crash when e.g. bpf_spin_lock is placed in map value with bpf_timer, as bpf_map_update_elem call will be able to overwrite the other timer object. When the issue is not fixed, an overwriting can produce the following splat: [root@(none) bpf]# ./test_progs -t timer_crash [ 15.930339] bpf_testmod: loading out-of-tree module taints kernel. [ 16.037849] ================================================================== [ 16.038458] BUG: KASAN: user-memory-access in __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.038944] Write of size 8 at addr 0000000000043ec0 by task test_progs/325 [ 16.039399] [ 16.039514] CPU: 0 PID: 325 Comm: test_progs Tainted: G OE 5.16.0+ #278 [ 16.039983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 16.040485] Call Trace: [ 16.040645] <TASK> [ 16.040805] dump_stack_lvl+0x59/0x73 [ 16.041069] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.041427] kasan_report.cold+0x116/0x11b [ 16.041673] ? __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042040] __pv_queued_spin_lock_slowpath+0x32b/0x520 [ 16.042328] ? memcpy+0x39/0x60 [ 16.042552] ? pv_hash+0xd0/0xd0 [ 16.042785] ? lockdep_hardirqs_off+0x95/0xd0 [ 16.043079] __bpf_spin_lock_irqsave+0xdf/0xf0 [ 16.043366] ? bpf_get_current_comm+0x50/0x50 [ 16.043608] ? jhash+0x11a/0x270 [ 16.043848] bpf_timer_cancel+0x34/0xe0 [ 16.044119] bpf_prog_c4ea1c0f7449940d_sys_enter+0x7c/0x81 [ 16.044500] bpf_trampoline_6442477838_0+0x36/0x1000 [ 16.044836] __x64_sys_nanosleep+0x5/0x140 [ 16.045119] do_syscall_64+0x59/0x80 [ 16.045377] ? lock_is_held_type+0xe4/0x140 [ 16.045670] ? irqentry_exit_to_user_mode+0xa/0x40 [ 16.046001] ? mark_held_locks+0x24/0x90 [ 16.046287] ? asm_exc_page_fault+0x1e/0x30 [ 16.046569] ? asm_exc_page_fault+0x8/0x30 [ 16.046851] ? lockdep_hardirqs_on+0x7e/0x100 [ 16.047137] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.047405] RIP: 0033:0x7f9e4831718d [ 16.047602] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48 [ 16.048764] RSP: 002b:00007fff488086b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000023 [ 16.049275] RAX: ffffffffffffffda RBX: 00007f9e48683740 RCX: 00007f9e4831718d [ 16.049747] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007fff488086d0 [ 16.050225] RBP: 00007fff488086f0 R08: 00007fff488085d7 R09: 00007f9e4cb594a0 [ 16.050648] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f9e484cde30 [ 16.051124] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 16.051608] </TASK> [ 16.051762] ================================================================== Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.") Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dāvis Mosāns <[email protected]> Date: Wed Feb 2 23:44:55 2022 +0200 btrfs: prevent copying too big compressed lzo segment commit 741b23a970a79d5d3a1db2d64fa2c7b375a4febb upstream. Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK> CC: [email protected] # 4.9+ Signed-off-by: Dāvis Mosāns <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Su Yue <[email protected]> Date: Fri Jan 21 17:33:35 2022 +0800 btrfs: tree-checker: check item_size for dev_item commit ea1d1ca4025ac6c075709f549f9aa036b5b6597d upstream. Check item size before accessing the device item to avoid out of bound access, similar to inode_item check. Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Su Yue <[email protected]> Date: Fri Jan 21 17:33:34 2022 +0800 btrfs: tree-checker: check item_size for inode_item commit 0c982944af27d131d3b74242f3528169f66950ad upstream. while mounting the crafted image, out-of-bounds access happens: [350.429619] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1 [350.429636] index 1048096 is out of range for type 'page *[16]' [350.429650] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4 #1 [350.429652] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [350.429653] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs] [350.429772] Call Trace: [350.429774] <TASK> [350.429776] dump_stack_lvl+0x47/0x5c [350.429780] ubsan_epilogue+0x5/0x50 [350.429786] __ubsan_handle_out_of_bounds+0x66/0x70 [350.429791] btrfs_get_16+0xfd/0x120 [btrfs] [350.429832] check_leaf+0x754/0x1a40 [btrfs] [350.429874] ? filemap_read+0x34a/0x390 [350.429878] ? load_balance+0x175/0xfc0 [350.429881] validate_extent_buffer+0x244/0x310 [btrfs] [350.429911] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs] [350.429935] end_bio_extent_readpage+0x3af/0x850 [btrfs] [350.429969] ? newidle_balance+0x259/0x480 [350.429972] end_workqueue_fn+0x29/0x40 [btrfs] [350.429995] btrfs_work_helper+0x71/0x330 [btrfs] [350.430030] ? __schedule+0x2fb/0xa40 [350.430033] process_one_work+0x1f6/0x400 [350.430035] ? process_one_work+0x400/0x400 [350.430036] worker_thread+0x2d/0x3d0 [350.430037] ? process_one_work+0x400/0x400 [350.430038] kthread+0x165/0x190 [350.430041] ? set_kthread_struct+0x40/0x40 [350.430043] ret_from_fork+0x1f/0x30 [350.430047] </TASK> [350.430077] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2 check_leaf() is checking the leaf: corrupt leaf: root=4 block=29396992 slot=1, bad key order, prev (16140901064495857664 1 0) current (1 204 12582912) leaf 29396992 items 6 free space 3565 generation 6 owner DEV_TREE leaf 29396992 flags 0x1(WRITTEN) backref revision 1 fs uuid a62e00e8-e94e-4200-8217-12444de93c2e chunk uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 item 0 key (16140901064495857664 INODE_ITEM 0) itemoff 3955 itemsize 40 generation 0 transid 0 size 0 nbytes 17592186044416 block group 0 mode 52667 links 33 uid 0 gid 2104132511 rdev 94223634821136 sequence 100305 flags 0x2409000(none) atime 0.0 (1970-01-01 08:00:00) ctime 2973280098083405823.4294967295 (-269783007-01-01 21:37:03) mtime 18446744071572723616.4026825121 (1902-04-16 12:40:00) otime 9249929404488876031.4294967295 (622322949-04-16 04:25:58) item 1 key (1 DEV_EXTENT 12582912) itemoff 3907 itemsize 48 dev extent chunk_tree 3 chunk_objectid 256 chunk_offset 12582912 length 8388608 chunk_tree_uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 The corrupted leaf of device tree has an inode item. The leaf passed checksum and others checks in validate_extent_buffer until check_leaf_item(). Because of the key type BTRFS_INODE_ITEM, check_inode_item() is called even we are in the device tree. Since the item offset + sizeof(struct btrfs_inode_item) > eb->len, out-of-bounds access is triggered. The item end vs leaf boundary check has been done before check_leaf_item(), so fix it by checking item size in check_inode_item() before access of the inode item in extent buffer. Other check functions except check_dev_item() in check_leaf_item() have their item size checks. The commit for check_dev_item() is followed. No regression observed during running fstests. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299 CC: [email protected] # 5.10+ CC: Wenqing Liu <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Tue Feb 15 11:35:47 2022 +0100 CDC-NCM: avoid overflow in sanity checking commit 8d2b1a1ec9f559d30b724877da4ce592edc41fdc upstream. A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. Signed-off-by: Oliver Neukum <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Michal Koutný <[email protected]> Date: Thu Feb 17 17:11:28 2022 +0100 cgroup-v1: Correct privileges check in release_agent writes commit 467a726b754f474936980da793b4ff2ec3e382a7 upstream. The idea is to check: a) the owning user_ns of cgroup_ns, b) capabilities in init_user_ns. The commit 24f600856418 ("cgroup-v1: Require capabilities to set release_agent") got this wrong in the write handler of release_agent since it checked user_ns of the opener (may be different from the owning user_ns of cgroup_ns). Secondly, to avoid possibly confused deputy, the capability of the opener must be checked. Fixes: 24f600856418 ("cgroup-v1: Require capabilities to set release_agent") Cc: [email protected] Link: https://lore.kernel.org/stable/[email protected]/ Signed-off-by: Michal Koutný <[email protected]> Reviewed-by: Masami Ichikawa(CIP) <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhang Qiao <[email protected]> Date: Fri Jan 21 18:12:10 2022 +0800 cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream. As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario: cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem) To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock. Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: [email protected] # v2.6.32+ Reported-by: Zhao Gongyi <[email protected]> Signed-off-by: Zhang Qiao <[email protected]> Acked-by: Waiman Long <[email protected]> Reviewed-by: Michal Koutný <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Siarhei Volkau <[email protected]> Date: Sat Feb 5 20:18:49 2022 +0300 clk: jz4725b: fix mmc0 clock gating commit 2f0754f27a230fee6e6d753f07585cee03bedfe3 upstream. The mmc0 clock gate bit was mistakenly assigned to "i2s" clock. You can find that the same bit is assigned to "mmc0" too. It leads to mmc0 hang for a long time after any sound activity also it prevented PM_SLEEP to work properly. I guess it was introduced by copy-paste from jz4740 driver where it is really controls I2S clock gate. Fixes: 226dfa4726eb ("clk: Add Ingenic jz4725b CGU driver") Signed-off-by: Siarhei Volkau <[email protected]> Tested-by: Siarhei Volkau <[email protected]> Reviewed-by: Paul Cercueil <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: ChenXiaoSong <[email protected]> Date: Tue Feb 15 15:10:30 2022 +0800 configfs: fix a race in configfs_{,un}register_subsystem() [ Upstream commit 84ec758fb2daa236026506868c8796b0500c047d ] When configfs_register_subsystem() or configfs_unregister_subsystem() is executing link_group() or unlink_group(), it is possible that two processes add or delete list concurrently. Some unfortunate interleavings of them can cause kernel panic. One of cases is: A --> B --> C --> D A <-- B <-- C <-- D delete list_head *B | delete list_head *C --------------------------------|----------------------------------- configfs_unregister_subsystem | configfs_unregister_subsystem unlink_group | unlink_group unlink_obj | unlink_obj list_del_init | list_del_init __list_del_entry | __list_del_entry __list_del | __list_del // next == C | next->prev = prev | | next->prev = prev prev->next = next | | // prev == B | prev->next = next Fix this by adding mutex when calling link_group() or unlink_group(), but parent configfs_subsystem is NULL when config_item is root. So I create a mutex configfs_subsystem_mutex. Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem") Signed-off-by: ChenXiaoSong <[email protected]> Signed-off-by: Laibin Qiu <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mårten Lindahl <[email protected]> Date: Wed Feb 16 10:41:28 2022 +0100 driver core: Free DMA range map when device is released commit d8f7a5484f2188e9af2d9e4e587587d724501b12 upstream. When unbinding/binding a driver with DMA mapped memory, the DMA map is not freed before the driver is reloaded. This leads to a memory leak when the DMA map is overwritten when reprobing the driver. This can be reproduced with a platform driver having a dma-range: dummy { ... #address-cells = <0x2>; #size-cells = <0x2>; ranges; dma-ranges = <...>; ... }; and then unbinding/binding it: ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/unbind DMA map object 0xffffff800b0ae540 still being held by &pdev->dev ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/bind ~# echo scan > /sys/kernel/debug/kmemleak ~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff800b0ae540 (size 64): comm "sh", pid 833, jiffies 4295174550 (age 2535.352s) hex dump (first 32 bytes): 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................ backtrace: [<ffffffefd1694708>] create_object.isra.0+0x108/0x344 [<ffffffefd1d1a850>] kmemleak_alloc+0x8c/0xd0 [<ffffffefd167e2d0>] __kmalloc+0x440/0x6f0 [<ffffffefd1a960a4>] of_dma_get_range+0x124/0x220 [<ffffffefd1a8ce90>] of_dma_configure_id+0x40/0x2d0 [<ffffffefd198b68c>] platform_dma_configure+0x5c/0xa4 [<ffffffefd198846c>] really_probe+0x8c/0x514 [<ffffffefd1988990>] __driver_probe_device+0x9c/0x19c [<ffffffefd1988cd8>] device_driver_attach+0x54/0xbc [<ffffffefd1986634>] bind_store+0xc4/0x120 [<ffffffefd19856e0>] drv_attr_store+0x30/0x44 [<ffffffefd173c9b0>] sysfs_kf_write+0x50/0x60 [<ffffffefd173c1c4>] kernfs_fop_write_iter+0x124/0x1b4 [<ffffffefd16a013c>] new_sync_write+0xdc/0x160 [<ffffffefd16a256c>] vfs_write+0x23c/0x2a0 [<ffffffefd16a2758>] ksys_write+0x64/0xec To prevent this we should free the dma_range_map when the device is released. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Cc: stable <[email protected]> Suggested-by: Rob Herring <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Mårten Lindahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bas Nieuwenhuizen <[email protected]> Date: Sat Feb 12 16:40:00 2022 +0100 drm/amd/display: Protect update_bw_bounding_box FPU code. commit 1432108d00e42ffa383240bcac8d58f89ae19104 upstream. For DCN3/3.01/3.02 at least these use the fpu. v2: squash in build fix for when DCN is not enabled (Leo) Signed-off-by: Bas Nieuwenhuizen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Evan Quan <[email protected]> Date: Thu Jan 20 19:16:19 2022 +0800 drm/amd/pm: fix some OEM SKU specific stability issues commit e3f3824874da78db5775a5cb9c0970cd1c6978bc upstream. Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU specific stability issues. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mario Limonciello <[email protected]> Date: Tue Feb 1 10:26:33 2022 -0600 drm/amd: Check if ASPM is enabled from PCIe subsystem commit 7294863a6f01248d72b61d38478978d638641bee upstream. commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") enabled ASPM by default but a variety of hardware configurations it turns out that this caused a regression. * PPC64LE hardware does not support ASPM at a hardware level. CONFIG_PCIEASPM is often disabled on these architectures. * Some dGPUs on ALD platforms don't work with ASPM enabled and PCIe subsystem disables it Check with the PCIe subsystem to see that ASPM has been enabled or not. Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://wiki.raptorcs.com/w/images/a/ad/P9_PHB_version1.0_27July2018_pub.pdf Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1723 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1739 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1885 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1907 Tested-by: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Evan Quan <[email protected]> Date: Thu Jan 20 16:15:52 2022 +0800 drm/amdgpu: disable MMHUB PG for Picasso commit f626dd0ff05043e5a7154770cc7cda66acee33a3 upstream. MMHUB PG needs to be disabled for Picasso for stability reasons. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chen Gong <[email protected]> Date: Thu Feb 17 15:29:41 2022 +0800 drm/amdgpu: do not enable asic reset for raven2 commit 1e2be869c8a7247a7253ef4f461f85e2f5931b95 upstream. The GPU reset function of raven2 is not maintained or tested, so it should be very unstable. Now the amdgpu_asic_reset function is added to amdgpu_pmops_suspend, which causes the S3 test of raven2 to fail, so the asic_reset of raven2 is ignored here. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Chen Gong <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maxime Ripard <[email protected]> Date: Thu Feb 3 12:54:16 2022 +0100 drm/edid: Always set RGB444 commit ecbd4912a693b862e25cba0a6990a8c95b00721e upstream. In order to fill the drm_display_info structure each time an EDID is read, the code currently will call drm_add_display_info with the parsed EDID. drm_add_display_info will then call drm_reset_display_info to reset all the fields to 0, and then set them to the proper value depending on the EDID. In the color_formats case, we will thus report that we don't support any color format, and then fill it back with RGB444 plus the additional formats described in the EDID Feature Support byte. However, since that byte only contains format-related bits since the 1.4 specification, this doesn't happen if the EDID is following an earlier specification. In turn, it means that for one of these EDID, we end up with color_formats set to 0. The EDID 1.3 specification never really specifies what it means by RGB exactly, but since both HDMI and DVI will use RGB444, it's fairly safe to assume it's supposed to be RGB444. Let's move the addition of RGB444 to color_formats earlier in drm_add_display_info() so that it's always set for a digital display. Fixes: da05a5a71ad8 ("drm: parse color format support for digital displays") Cc: Ville Syrjälä <[email protected]> Reported-by: Matthias Reichl <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Matt Roper <[email protected]> Date: Tue Feb 15 08:35:45 2022 -0800 drm/i915/dg2: Print PHY name properly on calibration error commit 28adef861233c6fce47372ebd2070b55eaa8e899 upstream. We need to use phy_name() to convert the PHY value into a human-readable character in the error message. Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init") Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Swathi Dhanavanthri <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ville Syrjälä <[email protected]> Date: Fri Feb 18 08:40:34 2022 +0200 drm/i915: Correctly populate use_sagv_wm for all pipes commit afc189df6bcc6be65961deb54e15ec60e7f85337 upstream. When changing between SAGV vs. no SAGV on tgl+ we have to update the use_sagv_wm flag for all the crtcs or else an active pipe not already in the state will end up using the wrong watermarks. That is especially bad when we end up with the tighter non-SAGV watermarks with SAGV enabled. Usually ends up in underruns. Cc: [email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ville Syrjälä <[email protected]> Date: Fri Feb 18 08:40:35 2022 +0200 drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV commit ec663bca9128f13eada25cd0446e7fcb5fcdc088 upstream. If the only thing that is changing is SAGV vs. no SAGV but the number of active planes and the total data rates end up unchanged we currently bail out of intel_bw_atomic_check() early and forget to actually compute the new WGV point mask and thus won't actually enable/disable SAGV as requested. This ends up poorly if we end up running with SAGV enabled when we shouldn't. Usually ends up in underruns. To fix this let's go through the QGV point mask computation if either the data rates/number of planes, or the state of SAGV is changing. v2: Check more carefully if things are changing to avoid the extra calculations/debugs from introducing unwanted overhead Cc: [email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> #v1 Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ville Syrjälä <[email protected]> Date: Mon Feb 14 11:18:08 2022 +0200 drm/i915: Widen the QGV point mask commit 3f33364836aacc28cd430d22cf22379e3b5ecd77 upstream. adlp+ adds some extra bits to the QGV point mask. The code attempts to handle that but forgot to actually make sure we can store those bits in the bw state. Fix it. Cc: [email protected] Cc: Stanislav Lisovskiy <[email protected]> Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> (cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e) Signed-off-by: Tvrtko Ursulin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maxime Ripard <[email protected]> Date: Thu Feb 3 11:20:03 2022 +0100 drm/vc4: crtc: Fix runtime_pm reference counting commit 6764eb690e77ecded48587d6d4e346ba2e196546 upstream. At boot on the BCM2711, if the HDMI controllers are running, the CRTC driver will disable itself and its associated HDMI controller to work around a hardware bug that would leave some pixels stuck in a FIFO. In order to avoid that issue, we need to run some operations in lockstep between the CRTC and HDMI controller, and we need to make sure the HDMI controller will be powered properly. However, since we haven't enabled it through KMS, the runtime_pm state is off at this point so we need to make sure the device is powered through pm_runtime_resume_and_get, and once the operations are complete, we call pm_runtime_put. However, the HDMI controller will do that itself in its post_crtc_powerdown, which means we'll end up calling pm_runtime_put for a single pm_runtime_get, throwing the reference counting off. Let's remove the pm_runtime_put call in the CRTC code in order to have the proper counting. Fixes: bca10db67bda ("drm/vc4: crtc: Make sure the HDMI controller is powered when disabling") Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Samuel Holland <[email protected]> Date: Sat Feb 12 14:50:48 2022 -0600 gpio: rockchip: Reset int_bothedge when changing trigger [ Upstream commit 7920af5c826cb4a7ada1ae26fdd317642805adc2 ] With v2 hardware, an IRQ can be configured to trigger on both edges via a bit in the int_bothedge register. Currently, the driver sets this bit when changing the trigger type to IRQ_TYPE_EDGE_BOTH, but fails to reset this bit if the trigger type is later changed to something else. This causes spurious IRQs, and when using gpio-keys with wakeup-event-action set to EV_ACT_(DE)ASSERTED, those IRQs translate into spurious wakeups. Fixes: 3bcbd1a85b68 ("gpio/rockchip: support next version gpio controller") Reported-by: Guillaume Savaton <[email protected]> Tested-by: Guillaume Savaton <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marc Zyngier <[email protected]> Date: Fri Feb 11 09:39:04 2022 +0000 gpio: tegra186: Fix chip_data type confusion commit d1e972ace42390de739cde87d96043dcbe502286 upstream. The tegra186 GPIO driver makes the assumption that the pointer returned by irq_data_get_irq_chip_data() is a pointer to a tegra_gpio structure. Unfortunately, it is actually a pointer to the inner gpio_chip structure, as mandated by the gpiolib infrastructure. Nice try. The saving grace is that the gpio_chip is the first member of tegra_gpio, so the bug has gone undetected since... forever. Fix it by performing a container_of() on the pointer. This results in no additional code, and makes it possible to understand how the whole thing works. Fixes: 5b2b135a87fc ("gpio: Add Tegra186 support") Signed-off-by: Marc Zyngier <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Bartosz Golaszewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mikko Perttunen <[email protected]> Date: Mon Feb 7 15:19:31 2022 +0200 gpu: host1x: Always return syncpoint value when waiting commit 184b58fa816fb5ee1854daf0d430766422bf2a77 upstream. The new TegraDRM UAPI uses syncpoint waiting with timeout set to zero to indicate reading the syncpoint value. To support that we need to return the syncpoint value always when waiting. Fixes: 44e961381354 ("drm/tegra: Implement syncpoint wait UAPI") Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tao Liu <[email protected]> Date: Fri Feb 18 22:35:24 2022 +0800 gso: do not skip outer ip header in case of ipip and net_failover commit cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream. We encounter a tcp drop issue in our cloud environment. Packet GROed in host forwards to a VM virtio_net nic with net_failover enabled. VM acts as a IPVS LB with ipip encapsulation. The full path like: host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat -> ipip encap -> net_failover tx -> virtio_net tx When net_failover transmits a ipip pkt (gso_type = 0x0103, which means SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso did because it supports TSO and GSO_IPXIP4. But network_header points to inner ip header. Call Trace: tcp4_gso_segment ------> return NULL inet_gso_segment ------> inner iph, network_header points to ipip_gso_segment inet_gso_segment ------> outer iph skb_mac_gso_segment Afterwards virtio_net transmits the pkt, only inner ip header is modified. And the outer one just keeps unchanged. The pkt will be dropped in remote host. Call Trace: inet_gso_segment ------> inner iph, outer iph is skipped skb_mac_gso_segment __skb_gso_segment validate_xmit_skb validate_xmit_skb_list sch_direct_xmit __qdisc_run __dev_queue_xmit ------> virtio_net dev_hard_start_xmit __dev_queue_xmit ------> net_failover ip_finish_output2 ip_output iptunnel_xmit ip_tunnel_xmit ipip_tunnel_xmit ------> ipip dev_hard_start_xmit __dev_queue_xmit ip_finish_output2 ip_output ip_forward ip_rcv __netif_receive_skb_one_core netif_receive_skb_internal napi_gro_receive receive_buf virtnet_poll net_rx_action The root cause of this issue is specific with the rare combination of SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option. SKB_GSO_DODGY is set from external virtio_net. We need to reset network header when callbacks.gso_segment() returns NULL. This patch also includes ipv6_gso_segment(), considering SIT, etc. Fixes: cb32f511a70b ("ipip: add GSO/TSO support") Signed-off-by: Tao Liu <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Guenter Roeck <[email protected]> Date: Mon Feb 21 08:32:14 2022 -0800 hwmon: Handle failure to register sensor with thermal zone correctly commit 1b5f517cca36292076d9e38fa6e33a257703e62e upstream. If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter <[email protected]> Cc: Dmitry Osipenko <[email protected]> Fixes: 1597b374af222 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko <[email protected]> Tested-by: Jon Hunter <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mike Marciniszyn <[email protected]> Date: Thu Feb 17 08:59:32 2022 -0500 IB/qib: Fix duplicate sysfs directory name commit 32f57cb1b2c8d6f20aefec7052b1bfeb7e3b69d4 upstream. The qib driver load has been failing with the following message: sysfs: cannot create duplicate filename '/devices/pci0000:80/0000:80:02.0/0000:81:00.0/infiniband/qib0/ports/1/linkcontrol' The patch below has two "linkcontrol" names causing the duplication. Fix by using the correct "diag_counters" name on the second instance. Fixes: 4a7aaf88c89f ("RDMA/qib: Use attributes for the port sysfs") Link: https://lore.kernel.org/r/1645106372-23004-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Cc: <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sukadev Bhattiprolu <[email protected]> Date: Mon Feb 21 15:05:45 2022 -0600 ibmvnic: schedule failover only if vioctl fails commit 277f2bb14361790a70e4b3c649e794b75a91a597 upstream. If client is unable to initiate a failover reset via H_VIOCTL hcall, then it should schedule a failover reset as a last resort. Otherwise, there is no need to do a last resort. Fixes: 334c42414729 ("ibmvnic: improve failover sysfs entry") Reported-by: Cris Forno <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: Dany Madden <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tom Rix <[email protected]> Date: Mon Feb 14 06:33:27 2022 -0800 ice: check the return of ice_ptp_gettimex64 commit ed22d9c8d128293fc7b0b086c7d3654bcb99a8dd upstream. Clang static analysis reports this issue time64.h:69:50: warning: The left operand of '+' is a garbage value set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec, ~~~~~~~~~~ ^ In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now' is set by ice_ptp_gettimex64(). This function can fail with -EBUSY, so 'now' can have a gargbage value. So check the return. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Tom Rix <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jacob Keller <[email protected]> Date: Fri Feb 25 12:21:01 2022 -0800 ice: fix concurrent reset and removal of VFs commit fadead80fe4c033b5e514fcbadd20b55c4494112 upstream. Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown") Cc: <[email protected]> # e6ba5273d4ed: ice: Fix race conditions between virtchnl handling and VF ndo ops Cc: <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Brett Creeley <[email protected]> Date: Fri Feb 25 12:21:00 2022 -0800 ice: Fix race conditions between virtchnl handling and VF ndo ops commit e6ba5273d4ede03d075d7a116b8edad1f6115f4d upstream. The VF can be configured via the PF's ndo ops at the same time the PF is receiving/handling virtchnl messages. This has many issues, with one of them being the ndo op could be actively resetting a VF (i.e. resetting it to the default state and deleting/re-adding the VF's VSI) while a virtchnl message is being handled. The following error was seen because a VF ndo op was used to change a VF's trust setting while the VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by making sure the virtchnl handling and VF ndo ops that trigger VF resets cannot run concurrently. This is done by adding a struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex will be locked around the critical operations and VFR. Since the ndo ops will trigger a VFR, the virtchnl thread will use mutex_trylock(). This is done because if any other thread (i.e. VF ndo op) has the mutex, then that means the current VF message being handled is no longer valid, so just ignore it. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Cc: <[email protected]> Signed-off-by: Brett Creeley <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> [I had to fix the cherry-pick manually as the patch added a line around some context that was missing.] Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tom Rix <[email protected]> Date: Mon Feb 14 07:40:43 2022 -0800 ice: initialize local variable 'tlv' commit 5950bdc88dd1d158f2845fdff8fb1de86476806c upstream. Clang static analysis reports this issues ice_common.c:5008:21: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ldo->phy_type_low |= ((u64)buf << (i * 16)); ~~~~~~~~~~~~~~~~~ ^ When called from ice_cfg_phy_fec() ldo is the uninitialized local variable tlv. So initialize. Fixes: ea78ce4dab05 ("ice: add link lenient and default override support") Signed-off-by: Tom Rix <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sean Nyekjaer <[email protected]> Date: Mon Dec 20 13:51:43 2021 +0100 iio: accel: fxls8962af: add padding to regmap for SPI commit ccbed9d8d2a5351d8238f2d3f0741c9a3176f752 upstream. Add missing don't care padding between address and data for SPI transfers Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Signed-off-by: Sean Nyekjaer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Cosmin Tanislav <[email protected]> Date: Wed Jan 12 22:00:36 2022 +0200 iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits commit 0e33d15f1dce9e3a80a970ea7f0b27837168aeca upstream. According to page 90 of the datasheet [1], AIN_BUFP is bit 6 and AIN_BUFM is bit 5 of the CONFIG_0 -> CONFIG_7 registers. Fix the mask used for setting these bits. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdf Fixes: 0eaecea6e487 ("iio: adc: ad7124: Add buffered input support") Signed-off-by: Cosmin Tanislav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Sat Jan 29 09:32:47 2022 +0100 iio: adc: men_z188_adc: Fix a resource leak in an error handling path commit e0a2e37f303828d030a83f33ffe14b36cb88d563 upstream. If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function. Fixes: 74aeac4da66f ("iio: adc: Add MEN 16z188 ADC driver") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/320fc777863880247c2aff4a9d1a54ba69abf080.1643445149.git.christophe.jaillet@wanadoo.fr Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oleksij Rempel <[email protected]> Date: Fri Jan 7 09:14:01 2022 +0100 iio: adc: tsc2046: fix memory corruption by preventing array overflow commit b7a78a8adaa8849c02f174d707aead0f85dca0da upstream. On one side we have indio_dev->num_channels includes all physical channels + timestamp channel. On other side we have an array allocated only for physical channels. So, fix memory corruption by ARRAY_SIZE() instead of num_channels variable. Note the first case is a cleanup rather than a fix as the software timestamp channel bit in active_scanmask is never set by the IIO core. Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller") Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Miaoqian Lin <[email protected]> Date: Thu Jan 6 11:23:09 2022 +0000 iio: Fix error handling for PM commit 632fe0bb8c5b9c06ec961f575ee42a6fff5eceeb upstream. The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fix this problem for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553. Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lorenzo Bianconi <[email protected]> Date: Sat Feb 5 22:57:42 2022 +0100 iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot commit ea85bf906466191b58532bb19f4fbb4591f0a77e upstream. We need to wait for sensor settling time (~ 3/ODR) before reading data in st_lsm6dsx_read_oneshot routine in order to avoid corrupted samples. Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Reported-by: Mario Tesi <[email protected]> Tested-by: Mario Tesi <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/b41ebda5535895298716c76d939f9f165fcd2d13.1644098120.git.lorenzo@kernel.org Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Nuno Sá <[email protected]> Date: Fri Jan 14 14:26:08 2022 +0100 iio:imu:adis16480: fix buffering for devices with no burst mode commit b0e85f95e30d4d2dc22ea123a30dba36406879a1 upstream. The trigger handler defined in the driver assumes that burst mode is being used. Hence, for devices that do not support it, we have to use the adis library default trigger implementation. Tested-by: Julia Pineda <[email protected]> Fixes: 941f130881fa9 ("iio: adis16480: support burst read function") Signed-off-by: Nuno Sá <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Mon Feb 14 20:10:03 2022 -0800 io_uring: add a schedule point in io_add_buffers() commit f240762f88b4b1b58561939ffd44837759756477 upstream. Looping ~65535 times doing kmalloc() calls can trigger soft lockups, especially with DEBUG features (like KASAN). [ 253.536212] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [b219417889:12575] [ 253.544433] Modules linked in: vfat fat i2c_mux_pca954x i2c_mux spidev cdc_acm xhci_pci xhci_hcd sha3_generic gq(O) [ 253.544451] CPU: 64 PID: 12575 Comm: b219417889 Tainted: G S O 5.17.0-smp-DEV #801 [ 253.544457] RIP: 0010:kernel_text_address (./include/asm-generic/sections.h:192 ./include/linux/kallsyms.h:29 kernel/extable.c:67 kernel/extable.c:98) [ 253.544464] Code: 0f 93 c0 48 c7 c1 e0 63 d7 a4 48 39 cb 0f 92 c1 20 c1 0f b6 c1 5b 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 48 89 fb <48> c7 c0 00 00 80 a0 41 be 01 00 00 00 48 39 c7 72 0c 48 c7 c0 40 [ 253.544468] RSP: 0018:ffff8882d8baf4c0 EFLAGS: 00000246 [ 253.544471] RAX: 1ffff1105b175e00 RBX: ffffffffa13ef09a RCX: 00000000a13ef001 [ 253.544474] RDX: ffffffffa13ef09a RSI: ffff8882d8baf558 RDI: ffffffffa13ef09a [ 253.544476] RBP: ffff8882d8baf4d8 R08: ffff8882d8baf5e0 R09: 0000000000000004 [ 253.544479] R10: ffff8882d8baf5e8 R11: ffffffffa0d59a50 R12: ffff8882eab20380 [ 253.544481] R13: ffffffffa0d59a50 R14: dffffc0000000000 R15: 1ffff1105b175eb0 [ 253.544483] FS: 00000000016d3380(0000) GS:ffff88af48c00000(0000) knlGS:0000000000000000 [ 253.544486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.544488] CR2: 00000000004af0f0 CR3: 00000002eabfa004 CR4: 00000000003706e0 [ 253.544491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 253.544492] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 253.544494] Call Trace: [ 253.544496] <TASK> [ 253.544498] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544505] __kernel_text_address (kernel/extable.c:78) [ 253.544508] unwind_get_return_address (arch/x86/kernel/unwind_frame.c:19) [ 253.544514] arch_stack_walk (arch/x86/kernel/stacktrace.c:27) [ 253.544517] ? io_queue_sqe (fs/io_uring.c:7143) [ 253.544521] stack_trace_save (kernel/stacktrace.c:123) [ 253.544527] ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544531] ? ____kasan_kmalloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:515) [ 253.544533] ? __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544535] ? kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544541] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544544] ? __io_queue_sqe (fs/io_uring.c:?) [ 253.544551] __kasan_kmalloc (mm/kasan/common.c:524) [ 253.544553] kmem_cache_alloc_trace (./include/linux/kasan.h:270 mm/slab.c:3567) [ 253.544556] ? io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544560] io_issue_sqe (fs/io_uring.c:4556 fs/io_uring.c:4589 fs/io_uring.c:6828) [ 253.544564] ? __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544567] ? __kasan_slab_alloc (mm/kasan/common.c:39 mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) [ 253.544569] ? kmem_cache_alloc_bulk (mm/slab.h:732 mm/slab.c:3546) [ 253.544573] ? __io_alloc_req_refill (fs/io_uring.c:2078) [ 253.544578] ? io_submit_sqes (fs/io_uring.c:7441) [ 253.544581] ? __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544584] ? __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544587] ? do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544590] ? entry_SYSCALL_64_after_hwframe (??:?) [ 253.544596] __io_queue_sqe (fs/io_uring.c:?) [ 253.544600] io_queue_sqe (fs/io_uring.c:7143) [ 253.544603] io_submit_sqe (fs/io_uring.c:?) [ 253.544608] io_submit_sqes (fs/io_uring.c:?) [ 253.544612] __se_sys_io_uring_enter (fs/io_uring.c:10154 fs/io_uring.c:10096) [ 253.544616] __x64_sys_io_uring_enter (fs/io_uring.c:10096) [ 253.544619] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) [ 253.544623] entry_SYSCALL_64_after_hwframe (??:?) Fixes: ddf0322db79c ("io_uring: add IORING_OP_PROVIDE_BUFFERS") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Pavel Begunkov <[email protected]> Cc: io-uring <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dylan Yudaken <[email protected]> Date: Tue Feb 22 08:17:51 2022 -0800 io_uring: disallow modification of rsrc_data during quiesce commit 80912cef18f16f8fe59d1fb9548d4364342be360 upstream. io_rsrc_ref_quiesce will unlock the uring while it waits for references to the io_rsrc_data to be killed. There are other places to the data that might add references to data via calls to io_rsrc_node_switch. There is a race condition where this reference can be added after the completion has been signalled. At this point the io_rsrc_ref_quiesce call will wake up and relock the uring, assuming the data is unused and can be freed - although it is actually being used. To fix this check in io_rsrc_ref_quiesce if a resource has been revived. Reported-by: [email protected] Cc: [email protected] Signed-off-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jens Axboe <[email protected]> Date: Mon Feb 21 05:49:30 2022 -0700 io_uring: don't convert to jiffies for waiting on timeouts commit 228339662b398a59b3560cd571deb8b25b253c7e upstream. If an application calls io_uring_enter(2) with a timespec passed in, convert that timespec to ktime_t rather than jiffies. The latter does not provide the granularity the application may expect, and may in fact provided different granularity on different systems, depending on what the HZ value is configured at. Turn the timespec into an absolute ktime_t, and use that with schedule_hrtimeout() instead. Link: https://github.com/axboe/liburing/issues/531 Cc: [email protected] Reported-by: Bob Chen <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Liang Zhang <[email protected]> Date: Tue Feb 22 11:12:39 2022 +0800 KVM: x86/mmu: make apf token non-zero to fix bug commit 6f3c1fc53d86d580d8d6d749c4af23705e4f6f79 upstream. In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 Signed-off-by: Liang Zhang <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Wed Mar 2 11:48:10 2022 +0100 Linux 5.15.26 Link: https://lore.kernel.org/r/[email protected] Tested-by: Shuah Khan <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Ron Economos <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Allen Pais <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Slade Watkins <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Miaohe Lin <[email protected]> Date: Thu Feb 17 22:53:27 2022 +0800 memblock: use kfree() to release kmalloced memblock regions commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream. memblock.{reserved,memory}.regions may be allocated using kmalloc() in memblock_double_array(). Use kfree() to release these kmalloced regions indicated by memblock_{reserved,memory}_in_slab. Signed-off-by: Miaohe Lin <[email protected]> Fixes: 3010f876500f ("mm: discard memblock data later") Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Matthew Wilcox (Oracle) <[email protected]> Date: Wed Feb 23 15:59:18 2022 +0000 mm/filemap: Fix handling of THPs in generic_file_buffered_read() When a THP is present in the page cache, we can return it several times, leading to userspace seeing the same data repeatedly if doing a read() that crosses a 64-page boundary. This is probably not a security issue (since the data all comes from the same file), but it can be interpreted as a transient data corruption issue. Fortunately, it is very rare as it can only occur when CONFIG_READ_ONLY_THP_FOR_FS is enabled, and it can only happen to executables. We don't often call read() on executables. This bug is fixed differently in v5.17 by commit 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache"). That commit is unsuitable for backporting, so fix this in the clearest way. It sacrifices a little performance for clarity, but this should never be a performance path in these kernel versions. Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read") Cc: [email protected] # v5.15, v5.16 Link: https://lore.kernel.org/r/[email protected]/ Analyzed-by: Adam Majer <[email protected]> Analyzed-by: Dirk Mueller <[email protected]> Bisected-by: Takashi Iwai <[email protected]> Reported-by: Vlastimil Babka <[email protected]> Tested-by: Vlastimil Babka <[email protected]> Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paolo Abeni <[email protected]> Date: Fri Feb 18 13:35:42 2022 -0800 mptcp: add mibs counter for ignored incoming options commit f73c1194634506ab60af0debef04671fc431a435 upstream. The MPTCP in kernel path manager has some constraints on incoming addresses announce processing, so that in edge scenarios it can end-up dropping (ignoring) some of such announces. The above is not very limiting in practice since such scenarios are very uncommon and MPTCP will recover due to ADD_ADDR retransmissions. This patch adds a few MIB counters to account for such drop events to allow easier introspection of the critical scenarios. Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paolo Abeni <[email protected]> Date: Fri Feb 18 13:35:41 2022 -0800 mptcp: fix race in incoming ADD_ADDR option processing commit 837cf45df163a3780bc04b555700231e95b31dc9 upstream. If an MPTCP endpoint received multiple consecutive incoming ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite the current remote address value after the PM lock is released in mptcp_pm_nl_add_addr_received() and before such address is echoed. Fix the issue caching the remote address value a little earlier and always using the cached value after releasing the PM lock. Fixes: f7efc7771eac ("mptcp: drop argument port from mptcp_pm_announce_addr") Reviewed-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe Kerello <[email protected]> Date: Sun Feb 20 15:14:32 2022 +0000 mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios property commit 6c7621890995d089a56a06d11580d185ede7c2f8 upstream. Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. A new Boolean flag named ignore_wp has been added in nvmem_config. In case ignore_wp is set, it means that the GPIO is handled by the provider. Lets set this flag in MTD layer to avoid the conflict on wp_gpios property. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: [email protected] Acked-by: Miquel Raynal <[email protected]> Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Thu Feb 17 09:05:02 2022 -0800 net-timestamp: convert sk->sk_tskey to atomic_t [ Upstream commit a1cdec57e03a1352e92fbbe7974039dda4efcec0 ] UDP sendmsg() can be lockless, this is causing all kinds of data races. This patch converts sk->sk_tskey to remove one of these races. BUG: KCSAN: data-race in __ip_append_data / __ip_append_data read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1: __ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0: __ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994 ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636 udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000054d -> 0x0000054e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams") Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yevgeny Kliteynik <[email protected]> Date: Fri Dec 24 01:07:30 2021 +0200 net/mlx5: DR, Cache STE shadow memory commit e5b2bc30c21139ae10f0e56989389d0bc7b7b1d6 upstream. During rule insertion on each ICM memory chunk we also allocate shadow memory used for management. This includes the hw_ste, dr_ste and miss list per entry. Since the scale of these allocations is large we noticed a performance hiccup that happens once malloc and free are stressed. In extreme usecases when ~1M chunks are freed at once, it might take up to 40 seconds to complete this, up to the point the kernel sees this as self-detected stall on CPU: rcu: INFO: rcu_sched self-detected stall on CPU To resolve this we will increase the reuse of shadow memory. Doing this we see that a time in the aforementioned usecase dropped from ~40 seconds to ~8-10 seconds. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yevgeny Kliteynik <[email protected]> Date: Thu Jan 13 14:52:48 2022 +0200 net/mlx5: DR, Don't allow match on IP w/o matching on full ethertype/ip_version commit ffb0753b954763d94f52c901adfe58ed0d4005e6 upstream. Currently SMFS allows adding rule with matching on src/dst IP w/o matching on full ethertype or ip_version, which is not supported by HW. This patch fixes this issue and adds the check as it is done in DMFS. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yevgeny Kliteynik <[email protected]> Date: Wed Dec 29 22:22:05 2021 +0200 net/mlx5: DR, Fix the threshold that defines when pool sync is initiated commit ecd9c5cd46e013659e2fad433057bad1ba66888e upstream. When deciding whether to start syncing and actually free all the "hot" ICM chunks, we need to consider the type of the ICM chunks that we're dealing with. For instance, the amount of available ICM for MODIFY_ACTION is significantly lower than the usual STE ICM, so the threshold should account for that - otherwise we can deplete MODIFY_ACTION memory just by creating and deleting the same modify header action in a continuous loop. This patch replaces the hard-coded threshold with a dynamic value. Fixes: 1c58651412bb ("net/mlx5: DR, ICM memory pools sync optimization") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maor Gottlieb <[email protected]> Date: Mon Jan 24 21:25:04 2022 +0200 net/mlx5: Fix possible deadlock on rule deletion commit b645e57debca846f51b3209907546ea857ddd3f5 upstream. Add missing call to up_write_ref_node() which releases the semaphore in case the FTE doesn't have destinations, such in drop rule case. Fixes: 465e7baab6d9 ("net/mlx5: Fix deletion of duplicate rules") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chris Mi <[email protected]> Date: Tue Dec 14 03:52:53 2021 +0200 net/mlx5: Fix tc max supported prio for nic mode commit be7f4b0ab149afd19514929fad824b2117d238c9 upstream. Only prio 1 is supported if firmware doesn't support ignore flow level for nic mode. The offending commit removed the check wrongly. Add it back. Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ariel Levkovich <[email protected]> Date: Sat Jan 29 01:39:24 2022 +0200 net/mlx5: Fix wrong limitation of metadata match on ecpf commit 07666c75ad17d7389b18ac0235c8cf41e1504ea8 upstream. Match metadata support check returns false for ecpf device. However, this support does exist for ecpf and therefore this limitation should be removed to allow feature such as stacked devices and internal port offloaded to be supported. Fixes: 92ab1eb392c6 ("net/mlx5: E-Switch, Enable vport metadata matching if firmware supports it") Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maher Sanalla <[email protected]> Date: Wed Feb 16 11:01:04 2022 +0200 net/mlx5: Update log_max_qp value to be 17 at most commit 7f839965b2d77e1926ad08b23c51d60988f10a99 upstream. Currently, log_max_qp value is dependent on what FW reports as its max capability. In reality, due to a bug, some FWs report a value greater than 17, even though they don't support log_max_qp > 17. This FW issue led the driver to exhaust memory on startup. Thus, log_max_qp value is set to be no more than 17 regardless of what FW reports, as it was before the cited commit. Fixes: f79a609ea6bf ("net/mlx5: Update log_max_qp value to FW max capability") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Avihai Horon <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Meir Lichtinger <[email protected]> Date: Mon Jan 10 10:14:41 2022 +0200 net/mlx5: Update the list of the PCI supported devices commit f908a35b22180c4da64cf2647e4f5f0cd3054da7 upstream. Add the upcoming BlueField-4 and ConnectX-8 device IDs. Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Gal Pressman <[email protected]> Date: Wed Feb 2 16:07:21 2022 +0200 net/mlx5e: Fix wrong return value on ioctl EEPROM query failure commit 0b89429722353d112f8b8b29ca397e95fa994d27 upstream. The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tariq Toukan <[email protected]> Date: Mon Jan 31 10:26:19 2022 +0200 net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets commit 7eaf1f37b8817c608c4e959d69986ef459d345cd upstream. For RX TLS device-offloaded packets, the HW spec guarantees checksum validation for the offloaded packets, but does not define whether the CQE.checksum field matches the original packet (ciphertext) or the decrypted one (plaintext). This latitude allows architetctural improvements between generations of chips, resulting in different decisions regarding the value type of CQE.checksum. Hence, for these packets, the device driver should not make use of this CQE field. Here we block CHECKSUM_COMPLETE usage for RX TLS device-offloaded packets, and use CHECKSUM_UNNECESSARY instead. Value of the packet's tcp_hdr.csum is not modified by the HW, and it always matches the original ciphertext. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maor Dickman <[email protected]> Date: Thu Jan 6 14:46:24 2022 +0200 net/mlx5e: MPLSoUDP decap, fix check for unsupported matches commit fdc18e4e4bded2a08638cdcd22dc087a64b9ddad upstream. Currently offload of rule on bareudp device require tunnel key in order to match on mpls fields and without it the mpls fields are ignored, this is incorrect due to the fact udp tunnel doesn't have key to match on. Fix by returning error in case flow is matching on tunnel key. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paul Blakey <[email protected]> Date: Thu Feb 17 11:30:48 2022 +0200 net/sched: act_ct: Fix flow table lookup after ct clear or switching zones commit 2f131de361f6d0eaff17db26efdb844c178432f8 upstream. Flow table lookup is skipped if packet either went through ct clear action (which set the IP_CT_UNTRACKED flag on the packet), or while switching zones and there is already a connection associated with the packet. This will result in no SW offload of the connection, and the and connection not being removed from flow table with TCP teardown (fin/rst packet). To fix the above, remove these unneccary checks in flow table lookup. Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows") Signed-off-by: Paul Blakey <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Fabio M. De Francesco <[email protected]> Date: Wed Feb 23 11:02:52 2022 +0100 net/smc: Use a mutex for locking "struct smc_pnettable" commit 7ff57e98fb78ad94edafbdc7435f2d745e9e6bb5 upstream. smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib() which, in turn, calls mutex_lock(&smc_ib_devices.mutex). read_lock() disables preemption. Therefore, the code acquires a mutex while in atomic context and it leads to a SAC bug. Fix this bug by replacing the rwlock with a mutex. Reported-and-tested-by: [email protected] Fixes: 64e28b52c7a6 ("net/smc: add pnet table namespace support") Confirmed-by: Tony Lu <[email protected]> Signed-off-by: Fabio M. De Francesco <[email protected]> Acked-by: Karsten Graul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Sun Feb 20 07:40:52 2022 -0800 net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends commit ef527f968ae05c6717c39f49c8709a7e2c19183a upstream. Whenever one of these functions pull all data from an skb in a frag_list, use consume_skb() instead of kfree_skb() to avoid polluting drop monitoring. Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Thu Feb 17 14:35:49 2022 +0100 net: Force inlining of checksum functions in net/checksum.h commit 5486f5bf790b5c664913076c3194b8f916a5c7ad upstream. All functions defined as static inline in net/checksum.h are meant to be inlined for performance reason. But since commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") the compiler is allowed to uninline functions when it wants. Fair enough in the general case, but for tiny performance critical checksum helpers that's counter-productive. The problem mainly arises when selecting CONFIG_CC_OPTIMISE_FOR_SIZE, Those helpers being 'static inline' in header files you suddenly find them duplicated many times in the resulting vmlinux. Here is a typical exemple when building powerpc pmac32_defconfig with CONFIG_CC_OPTIMISE_FOR_SIZE. csum_sub() appears 4 times: c04a23cc <csum_sub>: c04a23cc: 7c 84 20 f8 not r4,r4 c04a23d0: 7c 63 20 14 addc r3,r3,r4 c04a23d4: 7c 63 01 94 addze r3,r3 c04a23d8: 4e 80 00 20 blr ... c04a2ce8: 4b ff f6 e5 bl c04a23cc <csum_sub> ... c04a2d2c: 4b ff f6 a1 bl c04a23cc <csum_sub> ... c04a2d54: 4b ff f6 79 bl c04a23cc <csum_sub> ... c04a754c <csum_sub>: c04a754c: 7c 84 20 f8 not r4,r4 c04a7550: 7c 63 20 14 addc r3,r3,r4 c04a7554: 7c 63 01 94 addze r3,r3 c04a7558: 4e 80 00 20 blr ... c04ac930: 4b ff ac 1d bl c04a754c <csum_sub> ... c04ad264: 4b ff a2 e9 bl c04a754c <csum_sub> ... c04e3b08 <csum_sub>: c04e3b08: 7c 84 20 f8 not r4,r4 c04e3b0c: 7c 63 20 14 addc r3,r3,r4 c04e3b10: 7c 63 01 94 addze r3,r3 c04e3b14: 4e 80 00 20 blr ... c04e5788: 4b ff e3 81 bl c04e3b08 <csum_sub> ... c04e65c8: 4b ff d5 41 bl c04e3b08 <csum_sub> ... c0512d34 <csum_sub>: c0512d34: 7c 84 20 f8 not r4,r4 c0512d38: 7c 63 20 14 addc r3,r3,r4 c0512d3c: 7c 63 01 94 addze r3,r3 c0512d40: 4e 80 00 20 blr ... c0512dfc: 4b ff ff 39 bl c0512d34 <csum_sub> ... c05138bc: 4b ff f4 79 bl c0512d34 <csum_sub> ... Restore the expected behaviour by using __always_inline for all functions defined in net/checksum.h vmlinux size is even reduced by 256 bytes with this patch: text data bss dec hex filename 6980022 2515362 194384 9689768 93daa8 vmlinux.before 6979862 2515266 194384 9689512 93d9a8 vmlinux.now Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Cc: Masahiro Yamada <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xiaoke Wang <[email protected]> Date: Fri Feb 18 10:19:39 2022 +0800 net: ll_temac: check the return value of devm_kmalloc() commit b352c3465bb808ab700d03f5bac2f7a6f37c5350 upstream. devm_kmalloc() returns a pointer to allocated memory on success, NULL on failure. While lp->indirect_lock is allocated by devm_kmalloc() without proper check. It is better to check the value of it to prevent potential wrong memory access. Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP") Signed-off-by: Xiaoke Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baruch Siach <[email protected]> Date: Mon Feb 21 13:45:57 2022 +0200 net: mdio-ipq4019: add delay after clock enable commit b6ad6261d27708567b309fdb3102b12c42a070cc upstream. Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f80ac ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by: Baruch Siach <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Mauri Sandberg <[email protected]> Date: Wed Feb 23 16:23:37 2022 +0200 net: mv643xx_eth: process retval from of_get_mac_address commit 42404d8f1c01861b22ccfa1d70f950242720ae57 upstream. Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Florian Westphal <[email protected]> Date: Mon Feb 21 13:31:49 2022 +0100 netfilter: nf_tables: fix memory leak during stateful obj update commit dad3bdeef45f81a6e90204bcc85360bb76eccec7 upstream. stateful objects can be updated from the control plane. The transaction logic allocates a temporary object for this purpose. The ->init function was called for this object, so plain kfree() leaks resources. We must call ->destroy function of the object. nft_obj_destroy does this, but it also decrements the module refcount, but the update path doesn't increment it. To avoid special-casing the update object release, do module_get for the update case too and release it via nft_obj_destroy(). Fixes: d62d0ba97b58 ("netfilter: nf_tables: Introduce stateful object update operation") Cc: Fernando Fernandez Mancera <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Fri Feb 18 12:45:32 2022 +0100 netfilter: nf_tables: unregister flowtable hooks on netns exit commit 6069da443bf65f513bb507bb21e2f87cfb1ad0b6 upstream. Unregister flowtable hooks before they are releases via nf_tables_flowtable_destroy() otherwise hook core reports UAF. BUG: KASAN: use-after-free in nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 Read of size 4 at addr ffff8880736f7438 by task syz-executor579/3666 CPU: 0 PID: 3666 Comm: syz-executor579 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] __dump_stack lib/dump_stack.c:88 [inline] lib/dump_stack.c:106 dump_stack_lvl+0x1dc/0x2d8 lib/dump_stack.c:106 lib/dump_stack.c:106 print_address_description+0x65/0x380 mm/kasan/report.c:247 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] __kasan_report mm/kasan/report.c:433 [inline] mm/kasan/report.c:450 kasan_report+0x19a/0x1f0 mm/kasan/report.c:450 mm/kasan/report.c:450 nf_hook_entries_grow+0x5a7/0x700 net/netfilter/core.c:142 net/netfilter/core.c:142 __nf_register_net_hook+0x27e/0x8d0 net/netfilter/core.c:429 net/netfilter/core.c:429 nf_register_net_hook+0xaa/0x180 net/netfilter/core.c:571 net/netfilter/core.c:571 nft_register_flowtable_net_hooks+0x3c5/0x730 net/netfilter/nf_tables_api.c:7232 net/netfilter/nf_tables_api.c:7232 nf_tables_newflowtable+0x2022/0x2cf0 net/netfilter/nf_tables_api.c:7430 net/netfilter/nf_tables_api.c:7430 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv_batch net/netfilter/nfnetlink.c:513 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] net/netfilter/nfnetlink.c:652 nfnetlink_rcv+0x10e6/0x2550 net/netfilter/nfnetlink.c:652 net/netfilter/nfnetlink.c:652 __nft_release_hook() calls nft_unregister_flowtable_net_hooks() which only unregisters the hooks, then after RCU grace period, it is guaranteed that no packets add new entries to the flowtable (no flow offload rules and flowtable hooks are reachable from packet path), so it is safe to call nf_flow_table_free() which cleans up the remaining entries from the flowtable (both software and hardware) and it unbinds the flow_block. Fixes: ff4bf2f42a40 ("netfilter: nf_tables: add nft_unregister_flowtable_hook()") Reported-by: [email protected] Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Thu Feb 17 23:41:20 2022 +0100 netfilter: nf_tables_offload: incorrect flow offload action array size commit b1a5983f56e371046dcf164f90bfaf704d2b89f6 upstream. immediate verdict expression needs to allocate one slot in the flow offload action array, however, immediate data expression does not need to do so. fwd and dup expression need to allocate one slot, this is missing. Add a new offload_action interface to report if this expression needs to allocate one slot in the flow offload action array. Fixes: be2861dc36d7 ("netfilter: nft_{fwd,dup}_netdev: add offload support") Reported-and-tested-by: Nick Gregory <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Feb 8 18:30:43 2022 -0800 netfilter: xt_socket: fix a typo in socket_mt_destroy() commit 75063c9294fb239bbe64eb72141b6871fe526d29 upstream. Calling nf_defrag_ipv4_disable() instead of nf_defrag_ipv6_disable() was probably not the intent. I found this by code inspection, while chasing a possible issue in TPROXY. Fixes: de8c12110a13 ("netfilter: disable defrag once its no longer needed") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Sat Feb 12 00:44:11 2022 +0100 netfilter: xt_socket: missing ifdef CONFIG_IP6_NF_IPTABLES dependency commit 2874b7911132f6975e668f6849c8ac93bc4e1f35 upstream. nf_defrag_ipv6_disable() requires CONFIG_IP6_NF_IPTABLES. Fixes: 75063c9294fb ("netfilter: xt_socket: fix a typo in socket_mt_destroy()") Reported-by: kernel test robot <[email protected]> Reviewed-by: Eric Dumazet<[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Fri Feb 18 14:15:35 2022 +0100 nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() commit 3a14d0888eb4b0045884126acc69abfb7b87814d upstream. ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christoph Hellwig <[email protected]> Date: Wed Feb 16 14:14:58 2022 +0100 nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info commit 602e57c9799c19f27e440639deed3ec45cfe1651 upstream. Commit e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") introduced the NVME_NS_READY flag, which nvme_path_is_disabled() uses to check if a path can be used or not. We also need to set this flag for devices that fail the ZNS feature validation and which are available through passthrough devices only to that they can be used in multipathing setups. Fixes: e7d65803e2bb ("nvme-multipath: revalidate paths during rescan") Reported-by: Kanchan Joshi <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Daniel Wagner <[email protected]> Tested-by: Kanchan Joshi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe Kerello <[email protected]> Date: Sun Feb 20 15:14:31 2022 +0000 nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios property commit f6c052afe6f802d87c74153b7a57c43b2e9faf07 upstream. Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: [email protected] Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paul Blakey <[email protected]> Date: Wed Feb 23 18:34:16 2022 +0200 openvswitch: Fix setting ipv6 fields causing hw csum failure commit d9b5ae5c1b241b91480aa30408be12fe91af834a upstream. Ipv6 ttl, label and tos fields are modified without first pulling/pushing the ipv6 header, which would have updated the hw csum (if available). This might cause csum validation when sending the packet to the stack, as can be seen in the trace below. Fix this by updating skb->csum if available. Trace resulted by ipv6 ttl dec and then sending packet to conntrack [actions: set(ipv6(hlimit=63)),ct(zone=99)]: [295241.900063] s_pf0vf2: hw csum failure [295241.923191] Call Trace: [295241.925728] <IRQ> [295241.927836] dump_stack+0x5c/0x80 [295241.931240] __skb_checksum_complete+0xac/0xc0 [295241.935778] nf_conntrack_tcp_packet+0x398/0xba0 [nf_conntrack] [295241.953030] nf_conntrack_in+0x498/0x5e0 [nf_conntrack] [295241.958344] __ovs_ct_lookup+0xac/0x860 [openvswitch] [295241.968532] ovs_ct_execute+0x4a7/0x7c0 [openvswitch] [295241.979167] do_execute_actions+0x54a/0xaa0 [openvswitch] [295242.001482] ovs_execute_actions+0x48/0x100 [openvswitch] [295242.006966] ovs_dp_process_packet+0x96/0x1d0 [openvswitch] [295242.012626] ovs_vport_receive+0x6c/0xc0 [openvswitch] [295242.028763] netdev_frame_hook+0xc0/0x180 [openvswitch] [295242.034074] __netif_receive_skb_core+0x2ca/0xcb0 [295242.047498] netif_receive_skb_internal+0x3e/0xc0 [295242.052291] napi_gro_receive+0xba/0xe0 [295242.056231] mlx5e_handle_rx_cqe_mpwrq_rep+0x12b/0x250 [mlx5_core] [295242.062513] mlx5e_poll_rx_cq+0xa0f/0xa30 [mlx5_core] [295242.067669] mlx5e_napi_poll+0xe1/0x6b0 [mlx5_core] [295242.077958] net_rx_action+0x149/0x3b0 [295242.086762] __do_softirq+0xd7/0x2d6 [295242.090427] irq_exit+0xf7/0x100 [295242.093748] do_IRQ+0x7f/0xd0 [295242.096806] common_interrupt+0xf/0xf [295242.100559] </IRQ> [295242.102750] RIP: 0033:0x7f9022e88cbd [295242.125246] RSP: 002b:00007f9022282b20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda [295242.132900] RAX: 0000000000000005 RBX: 0000000000000010 RCX: 0000000000000000 [295242.140120] RDX: 00007f9022282ba8 RSI: 00007f9022282a30 RDI: 00007f9014005c30 [295242.147337] RBP: 00007f9014014d60 R08: 0000000000000020 R09: 00007f90254a8340 [295242.154557] R10: 00007f9022282a28 R11: 0000000000000246 R12: 0000000000000000 [295242.161775] R13: 00007f902308c000 R14: 000000000000002b R15: 00007f9022b71f40 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Paul Blakey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jens Wiklander <[email protected]> Date: Thu Jan 27 15:29:39 2022 +0100 optee: use driver internal tee_context for some rpc commit aceeafefff736057e8f93f19bbfbef26abd94604 upstream. Adds a driver private tee_context by moving the tee_context in struct optee_notif to struct optee. This tee_context was previously used when doing internal calls to secure world to deliver notification. The new driver internal tee_context is now also when allocating driver private shared memory. This decouples the shared memory object from its original tee_context. This is needed when the life time of such a memory allocation outlives the client tee_context. This patch fixes the problem described below: The addition of a shutdown hook by commit f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") introduced a kernel shutdown regression that can be triggered after running the OP-TEE xtest suites. Once the shutdown hook is called it is not possible to communicate any more with the supplicant process because the system is not scheduling task any longer. Thus if the optee driver shutdown path receives a supplicant RPC request from the OP-TEE we will deadlock the kernel's shutdown. Fixes: f25889f93184 ("optee: fix tee out of memory failure seen during kexec reboot") Fixes: 217e0250cccb ("tee: use reference counting for tee_context") Reported-by: Lars Persson <[email protected]> Cc: [email protected] Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Jens Wiklander <[email protected]> [JW: backport to 5.15-stable + update commit message] Signed-off-by: Jens Wiklander <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Fri Feb 18 09:25:20 2022 +0100 parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel commit dd2288f4a020d693360e3e8d72f8b9d9c25f5ef6 upstream. Usually the kernel provides fixup routines to emulate the fldd and fstd floating-point instructions if they load or store 8-byte from/to a not natuarally aligned memory location. On a 32-bit kernel I noticed that those unaligned handlers didn't worked and instead the application got a SEGV. While checking the code I found two problems: First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel. This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd instructions. The second problem are two bugs in the 32-bit inline assembly code, where the wrong registers where used. The calculation of the natural alignment used %2 (vall) instead of %3 (ior), and the first word was stored back to address %1 (valh) instead of %3 (ior). Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Fri Feb 18 23:40:14 2022 +0100 parisc/unaligned: Fix ldw() and stw() unalignment handlers commit a97279836867b1cb50a3d4f0b1bf60e0abe6d46c upstream. Fix 3 bugs: a) emulate_stw() doesn't return the error code value, so faulting instructions are not reported and aborted. b) Tell emulate_ldw() to handle fldw_l as floating point instruction c) Tell emulate_ldw() to handle ldw_m as integer instruction Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alexey Bayduraev <[email protected]> Date: Fri Feb 18 18:23:41 2022 +0300 perf data: Fix double free in perf_session__delete() commit 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 upstream. When perf_data__create_dir() fails, it calls close_dir(), but perf_session__delete() also calls close_dir() and since dir.version and dir.nr were initialized by perf_data__create_dir(), a double free occurs. This patch moves the initialization of dir.version and dir.nr after successful initialization of dir.files, that prevents double freeing. This behavior is already implemented in perf_data__open_dir(). Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Alexey Bayduraev <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Antonov <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Budankov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhengjun Xing <[email protected]> Date: Fri Feb 18 17:31:27 2022 +0800 perf evlist: Fix failed to use cpu list for uncore events commit 8a3d2ee0de3828e0d01f9682d35ee53704659bd0 upstream. The 'perf record' and 'perf stat' commands have supported the option '-C/--cpus' to count or collect only on the list of CPUs provided. Commit 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid") add it to be supported for hybrid. For hybrid support, it checks the cpu list are available on hybrid PMU. But when we test only uncore events(or events not in cpu_core and cpu_atom), there is a bug: Before: # perf stat -C0 -e uncore_clock/clockticks/ sleep 1 failed to use cpu list 0 In this case, for uncore event, its pmu_name is not cpu_core or cpu_atom, so in evlist__fix_hybrid_cpus, perf_pmu__find_hybrid_pmu should return NULL,both events_nr and unmatched_count should be 0 ,then the cpu list check function evlist__fix_hybrid_cpus return -1 and the error "failed to use cpu list 0" will happen. Bypass "events_nr=0" case then the issue is fixed. After: # perf stat -C0 -e uncore_clock/clockticks/ sleep 1 Performance counter stats for 'CPU(s) 0': 195,476,873 uncore_clock/clockticks/ 1.004518677 seconds time elapsed When testing with at least one core event and uncore events, it has no issue. # perf stat -C0 -e cpu_core/cpu-cycles/,uncore_clock/clockticks/ sleep 1 Performance counter stats for 'CPU(s) 0': 5,993,774 cpu_core/cpu-cycles/ 301,025,912 uncore_clock/clockticks/ 1.003964934 seconds time elapsed Fixes: 1d3351e631fc34d7 ("perf tools: Enable on a list of CPUs for hybrid") Reviewed-by: Kan Liang <[email protected]> Signed-off-by: Zhengjun Xing <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Wed Feb 9 21:08:06 2022 +0300 pinctrl: fix loop in k210_pinconf_get_drive() commit ba2ab85951c91a140a8fa51d8347d54e59ec009d upstream. The loop exited too early so the k210_pinconf_drive_strength[0] array element was never used. Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/20220209180804.GA18385@kili Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sean Anderson <[email protected]> Date: Wed Feb 9 13:28:22 2022 -0500 pinctrl: k210: Fix bias-pull-up commit e9f7b9228a94778edb7a63fde3c0a3c5bb793064 upstream. Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xin Long <[email protected]> Date: Wed Feb 23 22:41:08 2022 -0500 ping: remove pr_err from ping_lookup commit cd33bdcbead882c2e58fdb4a54a7bd75b610a452 upstream. As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Xin Long <[email protected]> Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jason Gunthorpe <[email protected]> Date: Wed Feb 23 11:23:57 2022 -0400 RDMA/cma: Do not change route.addr.src_addr outside state checks commit 22e9f71072fa605cbf033158db58e0790101928d upstream. If the state is not idle then resolve_prepare_src() should immediately fail and no change to global state should happen. However, it unconditionally overwrites the src_addr trying to build a temporary any address. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) Which would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae This is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address derived from the dst build one explicitly on the stack and bind to that as any other normal flow would do. rdma_bind_addr() will copy it over the src_addr once it knows the state is valid. This is similar to commit bc0bdc5afaa7 ("RDMA/cma: Do not change route.addr.src_addr.ss_family") Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: [email protected] Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bart Van Assche <[email protected]> Date: Tue Feb 15 13:05:11 2022 -0800 RDMA/ib_srp: Fix a deadlock [ Upstream commit 081bdc9fe05bb23248f5effb6f811da3da4b8252 ] Remove the flush_workqueue(system_long_wq) call since flushing system_long_wq is deadlock-prone and since that call is redundant with a preceding cancel_work_sync() Link: https://lore.kernel.org/r/[email protected] Fixes: ef6c49d87c34 ("IB/srp: Eliminate state SRP_TARGET_DEAD") Reported-by: [email protected] Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Md Haris Iqbal <[email protected]> Date: Thu Feb 17 04:09:28 2022 +0100 RDMA/rtrs-clt: Fix possible double free in error case [ Upstream commit 8700af2cc18c919b2a83e74e0479038fd113c15d ] Callback function rtrs_clt_dev_release() for put_device() calls kfree(clt) to free memory. We shouldn't call kfree(clt) again, and we can't use the clt after kfree too. Replace device_register() with device_initialize() and device_add() so that dev_set_name can() be used appropriately. Move mutex_destroy() to the release function so it can be called in the alloc_clt err path. Fixes: eab098246625 ("RDMA/rtrs-clt: Refactor the failure cases in alloc_clt") Link: https://lore.kernel.org/r/[email protected] Reported-by: Miaoqian Lin <[email protected]> Signed-off-by: Md Haris Iqbal <[email protected]> Reviewed-by: Jack Wang <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Md Haris Iqbal <[email protected]> Date: Thu Feb 17 04:09:29 2022 +0100 RDMA/rtrs-clt: Move free_permit from free_clt to rtrs_clt_close [ Upstream commit c46fa8911b17e3f808679061a8af8bee219f4602 ] Error path of rtrs_clt_open() calls free_clt(), where free_permit is called. This is wrong since error path of rtrs_clt_open() does not need to call free_permit(). Also, moving free_permits() call to rtrs_clt_close(), makes it more aligned with the call to alloc_permit() in rtrs_clt_open(). Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Md Haris Iqbal <[email protected]> Reviewed-by: Jack Wang <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Prasad Kumpatla <[email protected]> Date: Thu Feb 17 14:20:07 2022 +0530 regmap-irq: Update interrupt clear register for proper reset [ Upstream commit d04ad245d67a3991dfea5e108e4c452c2ab39bac ] With the existing logic where clear_ack is true (HW doesn’t support auto clear for ICR), interrupt clear register reset is not handled properly. Due to this only the first interrupts get processed properly and further interrupts are blocked due to not resetting interrupt clear register. Example for issue case where Invert_ack is false and clear_ack is true: Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2 interrupts making ISR = 0x11. Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to be cleared with the help of ICR once the Interrupt is processed. Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00. Step 3: Issue - In the existing code, ICR is written with ICR = ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts from raising except for interrupts 0 and 4. So expectation here is to reset ICR, which will unblock all the interrupts. if (chip->clear_ack) { if (chip->ack_invert && !ret) ........ else if (!ret) ret = regmap_write(map, reg, ~data->status_buf[i]); So writing 0 and 0xff (when ack_invert is true) should have no effect, other than clearing the ACKs just set. Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers") Signed-off-by: Prasad Kumpatla <[email protected]> Reviewed-by: Charles Keepax <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mateusz Palczewski <[email protected]> Date: Wed Feb 23 09:53:47 2022 -0800 Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" commit fe20371578ef640069e6ae9fa8038f60e7908565 upstream. Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf. Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by: Mateusz Palczewski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dmytro Bagrii <[email protected]> Date: Thu Feb 10 18:41:37 2022 +0200 Revert "USB: serial: ch341: add new Product ID for CH341A" commit 198a7ebd5fa17b4d0be8cb70240ee1be885175c0 upstream. This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63. CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table. Mode is selected by corresponding jumper setting. Signed-off-by: Dmytro Bagrii <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Damien Le Moal <[email protected]> Date: Wed Feb 9 12:56:23 2022 +0900 riscv: fix nommu_k210_sdcard_defconfig commit 762e52f79c95ea20a7229674ffd13b94d7d8959c upstream. Instead of an arbitrary delay, use the "rootwait" kernel option to wait for the mmc root device to be ready. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Changbin Du <[email protected]> Date: Sun Feb 13 16:18:45 2022 +0800 riscv: fix oops caused by irqsoff latency tracer commit 22e2100b1b07d6f5acc71cc1acb53f680c677d77 upstream. The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <[email protected]> Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Phil Elwell <[email protected]> Date: Wed Feb 16 16:08:02 2022 +0000 sc16is7xx: Fix for incorrect data being transmitted commit eebb0f4e894f1e9577a56b337693d1051dd6ebfd upstream. UART drivers are meant to use the port spinlock within certain methods, to protect against reentrancy. The sc16is7xx driver does very little locking, presumably because when added it triggers "scheduling while atomic" errors. This is due to the use of mutexes within the regmap abstraction layer, and the mutex implementation's habit of sleeping the current thread while waiting for access. Unfortunately this lack of interlocking can lead to corruption of outbound data, which occurs when the buffer used for I2C transmission is used simultaneously by two threads - a work queue thread running sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both of which can call sc16is7xx_handle_tx. An earlier patch added efr_lock, a mutex that controls access to the EFR register. This mutex is already claimed in the IRQ handler, and all that is required is to claim the same mutex in sc16is7xx_tx_proc. See: https://github.com/raspberrypi/linux/issues/4885 Fixes: 6393ff1c4435 ("sc16is7xx: Use threaded IRQ") Cc: stable <[email protected]> Signed-off-by: Phil Elwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Felix Maurer <[email protected]> Date: Fri Feb 11 18:43:36 2022 +0100 selftests: bpf: Check bpf_msg_push_data return value commit 61d06f01f9710b327a53492e5add9f972eb909b3 upstream. bpf_msg_push_data may return a non-zero value to indicate an error. The return value should be checked to prevent undetected errors. To indicate an error, the BPF programs now perform a different action than their intended one to make the userspace test program notice the error, i.e., the programs supposed to pass/redirect drop, the program supposed to drop passes. Fixes: 84fbfe026acaa ("bpf: test_sockmap add options to use msg_push_data") Signed-off-by: Felix Maurer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paolo Abeni <[email protected]> Date: Fri Feb 18 13:35:44 2022 -0800 selftests: mptcp: be more conservative with cookie MPJ limits commit e35f885b357d47e04380a2056d1b2cc3e6f4f24b upstream. Since commit 2843ff6f36db ("mptcp: remote addresses fullmesh"), an MPTCP client can attempt creating multiple MPJ subflow simultaneusly. In such scenario the server, when syncookies are enabled, could end-up accepting incoming MPJ syn even above the configured subflow limit, as the such limit can be enforced in a reliable way only after the subflow creation. In case of syncookie, only after the 3rd ack reception. As a consequence the related self-tests case sporadically fails, as it verify that the server always accept the expected number of MPJ syn. Address the issues relaxing the MPJ syn number constrain. Note that the check on the accepted number of MPJ 3rd ack still remains intact. Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Paolo Abeni <[email protected]> Date: Fri Feb 18 13:35:38 2022 -0800 selftests: mptcp: fix diag instability commit 0cd33c5ffec12bd77a1c02db2469fac08f840939 upstream. Instead of waiting for an arbitrary amount of time for the MPTCP MP_CAPABLE handshake to complete, explicitly wait for the relevant socket to enter into the established status. Additionally let the data transfer application use the slowest transfer mode available (-r), to cope with very slow host, or high jitter caused by hosting VMs. Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258 Reported-and-tested-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ondrej Mosnacek <[email protected]> Date: Mon Feb 21 15:06:49 2022 +0100 selinux: fix misuse of mutex_is_locked() commit ce2fc710c9d2b25afc710f49bb2065b4439a62bc upstream. mutex_is_locked() tests whether the mutex is locked *by any task*, while here we want to test if it is held *by the current task*. To avoid false/missed WARNINGs, use lockdep_assert_is_held() and lockdep_assert_is_not_held() instead, which do the right thing (though they are a no-op if CONFIG_LOCKDEP=n). Cc: [email protected] Fixes: 2554a48f4437 ("selinux: measure state and policy capabilities") Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: Paul Moore <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhou Qingyang <[email protected]> Date: Wed Dec 1 01:22:53 2021 +0800 spi: spi-zynq-qspi: Fix a NULL pointer dereference in zynq_qspi_exec_mem_op() [ Upstream commit ab3824427b848da10e9fe2727f035bbeecae6ff4 ] In zynq_qspi_exec_mem_op(), kzalloc() is directly used in memset(), which could lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of tmpbuf. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_SPI_ZYNQ_QSPI=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller") Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Thu Feb 17 14:10:44 2022 +0100 sr9700: sanity check for packet length commit e9da0b56fe27206b49f39805f7dcda8a89379062 upstream. A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check. Signed-off-by: Oliver Neukum <[email protected]> Reviewed-by: Grant Grundler <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Graute <[email protected]> Date: Thu Feb 10 09:53:22 2022 +0100 staging: fbtft: fb_st7789v: reset display before initialization commit b6821b0d9b56386d2bf14806f90ec401468c799f upstream. In rare cases the display is flipped or mirrored. This was observed more often in a low temperature environment. A clean reset on init_display() should help to get registers in a sane state. Fixes: ef8f317795da (staging: fbtft: use init function instead of init sequence) Cc: [email protected] Signed-off-by: Oliver Graute <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Feb 24 11:18:48 2022 +0100 surface: surface3_power: Fix battery readings on batteries without a serial number commit 21d90aaee8d5c2a097ef41f1430d97661233ecc6 upstream. The battery on the 2nd hand Surface 3 which I recently bought appears to not have a serial number programmed in. This results in any I2C reads from the registers containing the serial number failing with an I2C NACK. This was causing mshw0011_bix() to fail causing the battery readings to not work at all. Ignore EREMOTEIO (I2C NACK) errors when retrieving the serial number and continue with an empty serial number to fix this. Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation") BugLink: https://github.com/linux-surface/linux-surface/issues/608 Reviewed-by: Benjamin Tissoires <[email protected]> Reviewed-by: Maximilian Luz <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jens Wiklander <[email protected]> Date: Mon Oct 4 16:11:52 2021 +0200 tee: export teedev_open() and teedev_close_context() commit 1e2c3ef0496e72ba9001da5fd1b7ed56ccb30597 upstream. Exports the two functions teedev_open() and teedev_close_context() in order to make it easier to create a driver internal struct tee_context. Reviewed-by: Sumit Garg <[email protected]> Signed-off-by: Jens Wiklander <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chuansheng Liu <[email protected]> Date: Wed Feb 23 08:20:24 2022 +0800 thermal: int340x: fix memory leak in int3400_notify() commit 3abea10e6a8f0e7804ed4c124bea2d15aca977c8 upstream. It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly. Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event") Signed-off-by: Chuansheng Liu <[email protected]> Cc: 4.14+ <[email protected]> # 4.14+ Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Tue Feb 22 16:43:12 2022 +0300 tipc: Fix end of loop tests for list_for_each_entry() commit a1f8fec4dac8bc7b172b2bdbd881e015261a6322 upstream. These tests are supposed to check if the loop exited via a break or not. However the tests are wrong because if we did not exit via a break then "p" is not a valid pointer. In that case, it's the equivalent of "if (*(u32 *)sr == *last_key) {". That's going to work most of the time, but there is a potential for those to be equal. Fixes: 1593123a6a49 ("tipc: add name table dump to new netlink api") Fixes: 1a1a143daf84 ("tipc: add publication dump to new netlink api") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jens Axboe <[email protected]> Date: Tue Feb 15 11:22:04 2022 -0700 tps6598x: clear int mask on probe failure commit aba2081e0a9c977396124aa6df93b55ed5912b19 upstream. The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <[email protected]> Cc: stable <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Steven Rostedt (Google) <[email protected]> Date: Fri Feb 25 15:34:26 2022 -0500 tracefs: Set the group ownership in apply_options() not parse_options() commit 851e99ebeec3f4a672bb5010cf1ece095acee447 upstream. Al Viro brought it to my attention that the dentries may not be filled when the parse_options() is called, causing the call to set_gid() to possibly crash. It should only be called if parse_options() succeeds totally anyway. He suggested the logical place to do the update is in apply_options(). Link: https://lore.kernel.org/all/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Acked-by: Al Viro <[email protected]> Reported-by: Al Viro <[email protected]> Fixes: 48b27b6b5191 ("tracefs: Set all files to the same group ownership as the mount option") Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Daniel Bristot de Oliveira <[email protected]> Date: Sun Feb 20 23:49:57 2022 +0100 tracing: Dump stacktrace trigger to the corresponding instance commit ce33c845b030c9cf768370c951bc699470b09fa7 upstream. The stacktrace event trigger is not dumping the stacktrace to the instance where it was enabled, but to the global "instance." Use the private_data, pointing to the trigger file, to figure out the corresponding trace instance, and use it in the trigger action, like snapshot_trigger does. Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org Cc: [email protected] Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Reviewed-by: Tom Zanussi <[email protected]> Tested-by: Tom Zanussi <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Steven Rostedt (Google) <[email protected]> Date: Wed Feb 23 22:38:37 2022 -0500 tracing: Have traceon and traceoff trigger honor the instance commit 302e9edd54985f584cfc180098f3554774126969 upstream. If a trigger is set on an event to disable or enable tracing within an instance, then tracing should be disabled or enabled in the instance and not at the top level, which is confusing to users. Link: https://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Tested-by: Daniel Bristot de Oliveira <[email protected]> Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:23 2022 -0800 tty: n_gsm: fix deadlock in gsmtty_open() commit a2ab75b8e76e455af7867e3835fd9cdf386b508f upstream. In the current implementation the user may open a virtual tty which then could fail to establish the underlying DLCI. The function gsmtty_open() gets stuck in tty_port_block_til_ready() while waiting for a carrier rise. This happens if the remote side fails to acknowledge the link establishment request in time or completely. At some point gsm_dlci_close() is called to abort the link establishment attempt. The function tries to inform the associated virtual tty by performing a hangup. But the blocking loop within tty_port_block_til_ready() is not informed about this event. The patch proposed here fixes this by resetting the initialization state of the virtual tty to ensure the loop exits and triggering it to make tty_port_block_til_ready() return. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:17 2022 -0800 tty: n_gsm: fix encoding of control signal octet bit DV commit 737b0ef3be6b319d6c1fd64193d1603311969326 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side. This patch fixes this behavior by setting the DV bit on the initiator side unconditionally. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:20 2022 -0800 tty: n_gsm: fix NULL pointer access due to DLCI release commit 96b169f05cdcc844b400695184d77e42071d14f2 upstream. The here fixed commit made the tty hangup asynchronous to avoid a circular locking warning. I could not reproduce this warning. Furthermore, due to the asynchronous hangup the function call now gets queued up while the underlying tty is being freed. Depending on the timing this results in a NULL pointer access in the global work queue scheduler. To be precise in process_one_work(). Therefore, the previous commit made the issue worse which it tried to fix. This patch fixes this by falling back to the old behavior which uses a blocking tty hangup call before freeing up the associated tty. Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:19 2022 -0800 tty: n_gsm: fix proper link termination after failed open commit e3b7468f082d106459e86e8dc6fb9bdd65553433 upstream. Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state. This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:22 2022 -0800 tty: n_gsm: fix wrong modem processing in convergence layer type 2 commit 687f9ad43c52501f46164758e908a5dd181a87fc upstream. The function gsm_process_modem() exists to handle modem status bits of incoming frames. This includes incoming MSC (modem status command) frames and convergence layer type 2 data frames. The function, however, was only designed to handle MSC frames as it expects the command length. Within gsm_dlci_data() it is wrongly assumed that this is the same as the data frame length. This is only true if the data frame contains only 1 byte of payload. This patch names the length parameter of gsm_process_modem() in a generic manner to reflect its association. It also corrects all calls to the function to handle the variable number of modem status octets correctly in both cases. Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: [email protected] <[email protected]> Date: Thu Feb 17 23:31:21 2022 -0800 tty: n_gsm: fix wrong tty control line for flow control commit c19d93542a6081577e6da9bf5e887979c72e80c1 upstream. tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle(). Both functions propagate the outgoing hardware flow control state to the remote side via MSC (modem status command) frames. The local state is taken from the RTS (ready to send) flag of the tty. However, RTS gets mapped to DTR (data terminal ready), which is wrong. This patch corrects this by mapping RTS to RTS. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Tue Feb 22 16:42:51 2022 +0300 udp_tunnel: Fix end of loop test in udp_tunnel_nic_unregister() commit de7b2efacf4e83954aed3f029d347dfc0b7a4f49 upstream. This test is checking if we exited the list via break or not. However if it did not exit via a break then "node" does not point to a valid udp_tunnel_nic_shared_node struct. It will work because of the way the structs are laid out it's the equivalent of "if (info->shared->udp_tunnel_nic_info != dev)" which will always be true, but it's not the right way to test. Fixes: 74cc6d182d03 ("udp_tunnel: add the ability to share port tables") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Fabrice Gasnier <[email protected]> Date: Wed Feb 16 09:12:15 2022 +0100 usb: dwc2: drd: fix soft connect when gadget is unconfigured commit 32fde84362c40961726a5c91f35ad37355ccc0c6 upstream. When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <[email protected]> Signed-off-by: Fabrice Gasnier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sebastian Andrzej Siewior <[email protected]> Date: Fri Feb 18 18:32:45 2022 +0100 usb: dwc3: gadget: Let the interrupt handler disable bottom halves. commit 84918a89d6efaff075de570b55642b6f4ceeac6d upstream. The interrupt service routine registered for the gadget is a primary handler which mask the interrupt source and a threaded handler which handles the source of the interrupt. Since the threaded handler is voluntary threaded, the IRQ-core does not disable bottom halves before invoke the handler like it does for the forced-threaded handler. Due to changes in networking it became visible that a network gadget's completions handler may schedule a softirq which remains unprocessed. The gadget's completion handler is usually invoked either in hard-IRQ or soft-IRQ context. In this context it is enough to just raise the softirq because the softirq itself will be handled once that context is left. In the case of the voluntary threaded handler, there is nothing that will process pending softirqs. Which means it remain queued until another random interrupt (on this CPU) fires and handles it on its exit path or another thread locks and unlocks a lock with the bh suffix. Worst case is that the CPU goes idle and the NOHZ complains about unhandled softirqs. Disable bottom halves before acquiring the lock (and disabling interrupts) and enable them after dropping the lock. This ensures that any pending softirqs will handled right away. Link: https://lkml.kernel.org/r/[email protected] Fixes: e5f68b4a3e7b0 ("Revert "usb: dwc3: gadget: remove unnecessary _irqsave()"") Cc: stable <[email protected]> Reported-by: Marek Szyprowski <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lore.kernel.org/r/Yg/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sun Feb 13 14:05:16 2022 +0100 usb: dwc3: pci: Add "snps,dis_u2_susphy_quirk" for Intel Bay Trail commit d7c93a903f33ff35aa0e6b5a8032eb9755b00826 upstream. Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") fixed an issue where ULPI transfers would timeout if any requests where send to the phy sometime after init, giving it enough time to auto-suspend. Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") changed the behavior to instead of clearing the DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set. But on Bay Trail devices, when phy_set_mode() gets called during init, this leads to errors like these: [ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a [ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to fix this. This restores the old behavior for Bay Trail devices, since previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first ulpi_read/_write() and then was never set again. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Cc: [email protected] Cc: Serge Semin <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sun Feb 13 14:05:17 2022 +0100 usb: dwc3: pci: Fix Bay Trail phy GPIO mappings commit 62e3f0afe246720f7646eb1b034a6897dac34405 upstream. When the Bay Trail phy GPIO mappings where added cs and reset were swapped, this did not cause any issues sofar, because sofar they were always driven high/low at the same time. Note the new mapping has been verified both in /sys/kernel/debug/gpio output on Android factory images on multiple devices, as well as in the schematics for some devices. Fixes: 5741022cbdf3 ("usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resources") Cc: stable <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Daehwan Jung <[email protected]> Date: Tue Feb 22 14:29:28 2022 +0900 usb: gadget: rndis: add spinlock for rndis response list commit aaaba1c86d04dac8e49bf508b492f81506257da3 upstream. There's no lock for rndis response list. It could cause list corruption if there're two different list_add at the same time like below. It's better to add in rndis_add_response / rndis_free_response / rndis_get_next_response to prevent any race condition on response list. [ 361.894299] [1: irq/191-dwc3:16979] list_add corruption. next->prev should be prev (ffffff80651764d0), but was ffffff883dc36f80. (next=ffffff80651764d0). [ 361.904380] [1: irq/191-dwc3:16979] Call trace: [ 361.904391] [1: irq/191-dwc3:16979] __list_add_valid+0x74/0x90 [ 361.904401] [1: irq/191-dwc3:16979] rndis_msg_parser+0x168/0x8c0 [ 361.904409] [1: irq/191-dwc3:16979] rndis_command_complete+0x24/0x84 [ 361.904417] [1: irq/191-dwc3:16979] usb_gadget_giveback_request+0x20/0xe4 [ 361.904426] [1: irq/191-dwc3:16979] dwc3_gadget_giveback+0x44/0x60 [ 361.904434] [1: irq/191-dwc3:16979] dwc3_ep0_complete_data+0x1e8/0x3a0 [ 361.904442] [1: irq/191-dwc3:16979] dwc3_ep0_interrupt+0x29c/0x3dc [ 361.904450] [1: irq/191-dwc3:16979] dwc3_process_event_entry+0x78/0x6cc [ 361.904457] [1: irq/191-dwc3:16979] dwc3_process_event_buf+0xa0/0x1ec [ 361.904465] [1: irq/191-dwc3:16979] dwc3_thread_interrupt+0x34/0x5c Fixes: f6281af9d62e ("usb: gadget: rndis: use list_for_each_entry_safe") Cc: stable <[email protected]> Signed-off-by: Daehwan Jung <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Szymon Heidrich <[email protected]> Date: Mon Feb 21 13:24:56 2022 +0100 USB: gadget: validate endpoint index for xilinx udc commit 7f14c7227f342d9932f9b918893c8814f86d2a0d upstream. Assure that host may not manipulate the index to point past endpoint array. Signed-off-by: Szymon Heidrich <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Slark Xiao <[email protected]> Date: Mon Feb 14 10:14:01 2022 +0800 USB: serial: option: add support for DW5829e commit 6ecb3f0b18b320320460a42e40d6fb603f6ded96 upstream. Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below: DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG. Signed-off-by: Slark Xiao <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: drop unnecessary reservation of interface 1 ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Daniele Palmas <[email protected]> Date: Fri Feb 18 14:45:52 2022 +0100 USB: serial: option: add Telit LE910R1 compositions commit cfc4442c642d568014474b6718ccf65dc7ca6099 upstream. Add support for the following Telit LE910R1 compositions: 0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oliver Neukum <[email protected]> Date: Mon Feb 14 15:08:18 2022 +0100 USB: zaurus: support another broken Zaurus commit 6605cc67ca18b9d583eb96e18a20f5f4e726103c upstream. This SL-6000 says Direct Line, not Ethernet v2: added Reporter and Link Signed-off-by: Oliver Neukum <[email protected]> Reported-by: Ross Maynard <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215361 Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Stefano Garzarella <[email protected]> Date: Tue Feb 22 10:47:42 2022 +0100 vhost/vsock: don't check owner in vhost_vsock_stop() while releasing commit a58da53ffd70294ebea8ecd0eb45fd0d74add9f9 upstream. vhost_vsock_stop() calls vhost_dev_check_owner() to check the device ownership. It expects current->mm to be valid. vhost_vsock_stop() is also called by vhost_vsock_dev_release() when the user has not done close(), so when we are in do_exit(). In this case current->mm is invalid and we're releasing the device, so we should clean it anyway. Let's check the owner only when vhost_vsock_stop() is called by an ioctl. When invoked from release we can not fail so we don't check return code of vhost_vsock_stop(). We need to stop vsock even if it's not the owner. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: [email protected] Reported-by: [email protected] Reported-and-tested-by: [email protected] Signed-off-by: Stefano Garzarella <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Andy Lutomirski <[email protected]> Date: Mon Feb 14 13:05:49 2022 +0100 x86/ptrace: Fix xfpregs_set()'s incorrect xmm clearing commit 44cad52cc14ae10062f142ec16ede489bccf4469 upstream. xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual code treats these regsets as modern FX state (i.e. the beginning part of XSTATE). The declarations of the regsets thought they were the legacy i387 format. The code thought they were the 32-bit (no xmm8..15) variant of XSTATE and, for good measure, made the high bits disappear by zeroing the wrong part of the buffer. The latter broke ptrace, and everything else confused anyone trying to understand the code. In particular, the nonsense definitions of the regsets confused me when I wrote this code. Clean this all up. Change the declarations to match reality (which shouldn't change the generated code, let alone the ABI) and fix xfpregs_set() to clear the correct bits and to only do so for 32-bit callers. Fixes: 6164331d15f7 ("x86/fpu: Rewrite xfpregs_set()") Reported-by: Luís Ferreira <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215524 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hongyu Xie <[email protected]> Date: Tue Feb 15 14:33:20 2022 +0200 xhci: Prevent futile URB re-submissions due to incorrect return value. commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream. The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: [email protected] Signed-off-by: Hongyu Xie <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Puma Hsu <[email protected]> Date: Tue Feb 15 14:33:19 2022 +0200 xhci: re-initialize the HC during resume if HCE was set commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream. When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: [email protected] Signed-off-by: Puma Hsu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>