Author: Dominique Martinet <[email protected]> Date: Wed May 3 16:49:26 2023 +0900 9p: virtio: fix unlikely null pointer deref in handle_rerror [ Upstream commit 13ade4ac5c28e8a014fa85278f5a4270b215f906 ] handle_rerror can dereference the pages pointer, but it is not necessarily set for small payloads. In practice these should be filtered out by the size check, but might as well double-check explicitly. This fixes the following scan-build warnings: net/9p/trans_virtio.c:401:24: warning: Dereference of null pointer [core.NullDereference] memcpy_from_page(to, *pages++, offs, n); ^~~~~~~~ net/9p/trans_virtio.c:406:23: warning: Dereference of null pointer (loaded from variable 'pages') [core.NullDereference] memcpy_from_page(to, *pages, offs, size); ^~~~~~ Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Dominique Martinet <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dominique Martinet <[email protected]> Date: Wed May 3 16:49:27 2023 +0900 9p: virtio: make sure 'offs' is initialized in zc_request [ Upstream commit 4a73edab69d3a6623f03817fe950a2d9585f80e4 ] Similarly to the previous patch: offs can be used in handle_rerrors without initializing on small payloads; in this case handle_rerrors will not use it because of the size check, but it doesn't hurt to make sure it is zero to please scan-build. This fixes the following warning: net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage] handle_rerror(req, in_hdr_len, offs, in_pages); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Dominique Martinet <[email protected]> Signed-off-by: Eric Van Hensbergen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mario Limonciello <[email protected]> Date: Fri Aug 18 14:40:04 2023 -0500 ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table [ Upstream commit 9cc8cd086f05d9a01026c65c98da88561e9c619e ] The constraints table should be resetting the `list` object after running through all of `info_obj` iterations. This adjusts whitespace as well as less code will now be included with each loop. This fixes a functional problem is fixed where a badly formed package in the inner loop may have incorrect data. Fixes: 146f1ed852a8 ("ACPI: PM: s2idle: Add AMD support to handle _DSM") Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mario Limonciello <[email protected]> Date: Fri Aug 18 14:40:02 2023 -0500 ACPI: x86: s2idle: Post-increment variables when getting constraints [ Upstream commit 3c6b1212d20bbbffcad5709ab0f2d5ed9b5859a8 ] When code uses a pre-increment it makes the reader question "why". In the constraint fetching code there is no reason for the variables to be pre-incremented so adjust to post-increment. No intended functional changes. Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]> Suggested-by: Bjorn Helgaas <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Stable-dep-of: 9cc8cd086f05 ("ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table") Signed-off-by: Sasha Levin <[email protected]>
Author: Su Hui <[email protected]> Date: Wed Aug 23 10:52:13 2023 +0800 ALSA: ac97: Fix possible error value of *rac97 [ Upstream commit 67de40c9df94037769967ba28c7d951afb45b7fb ] Before committing 79597c8bf64c, *rac97 always be NULL if there is an error. When error happens, make sure *rac97 is NULL is safer. For examble, in snd_vortex_mixer(): err = snd_ac97_mixer(pbus, &ac97, &vortex->codec); vortex->isquad = ((vortex->codec == NULL) ? 0 : (vortex->codec->ext_id&0x80)); If error happened but vortex->codec isn't NULL, this may cause some problems. Move the judgement order to be clearer and better. Fixes: 79597c8bf64c ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer") Suggested-by: Christophe JAILLET <[email protected]> Acked-by: Christophe JAILLET <[email protected]> Signed-off-by: Su Hui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vitaly Rodionov <[email protected]> Date: Mon Sep 4 17:00:33 2023 +0100 ALSA: hda/cirrus: Fix broken audio on hardware with two CS42L42 codecs. commit 99bf5b0baac941176a6a3d5cef7705b29808de34 upstream. Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers (commit 0c52310f260014d95c1310364379772cb74cf82d) and causing few issues on platforms with two CS42L42 codecs. Canonical/Dell has reported an issue with Vostro-3910. We need to increase this value by 15ms. Link: https://bugs.launchpad.net/somerville/+bug/2031060 Fixes: 9fb9fa18fb50 ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.") Signed-off-by: Vitaly Rodionov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chris Chiu <[email protected]> Date: Tue Jun 6 22:57:47 2023 +0800 ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform [ Upstream commit b752a385b584d385683c65cb76a1298f1379a88c ] In the commit 7bb62340951a ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform"), speakers and LEDs are fixed but only 2 CS35L41 amplifiers on SPI bus connected to Realtek codec are enabled. Need the ALC245_FIXUP_CS35L41_SPI_4_HP_GPIO_LED to get all amplifiers working. Signed-off-by: Chris Chiu <[email protected]> Fixes: 7bb62340951a ("ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue Aug 29 15:43:44 2023 +0200 ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl commit 358040e3807754944dbddf948a23c6d914297ed7 upstream. The update of rate_num/den and msbits were factored out to fixup_unreferenced_params() function to be called explicitly after the hw_refine or hw_params procedure. It's called from snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl. This ended up with the incomplete rate_num/den and msbits parameters when 32bit compat ioctl is used. This patch adds the missing call in snd_pcm_ioctl_hw_params_compat(). Reported-by: [email protected] Fixes: f9a076bff053 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible") Reviewed-by: Takashi Sakamoto <[email protected]> Reviewed-by: Jaroslav Kysela <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Mon Jun 12 14:55:33 2023 +0200 ALSA: seq: oss: Fix racy open/close of MIDI devices [ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ] Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be called concurrently from different code paths, we have no proper data protection against races. Introduce open_mutex to each seq_oss_midi object for avoiding the races. Reported-by: "Gong, Sishuai" <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue Jul 25 11:20:57 2023 +0200 ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset [ Upstream commit 3da435063777f8d861ba5a165344e3f75f839357 ] Microsoft Modern Wireless Headset (appearing on the host as "Microsoft USB Link") has a playback and a capture mixer volume/switch, but they are fairly broken. The descriptor reports wrong dB ranges for playback, and the capture volume/switch don't influence on the actual recording at all. Moreover, there seem instabilities in the connection, and at best, we should disable the runtime PM. So this ended up with a quirk entry for: - Correct the playback dB range; I picked up some reasonable values but it's a guess work - Disable the capture mixer; it's completely useless and confuses PA/PW - Suppress get-sample-rate, apply the delay for message handling, and suppress the auto-suspend The behavior of the wheel control on the headset is somehow flaky, too, but it's an issue of HID. Link: https://bugzilla.suse.com/show_bug.cgi?id=1207129 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jussi Laako <[email protected]> Date: Wed Jul 26 19:56:45 2023 +0300 ALSA: usb-audio: Update for native DSD support quirks [ Upstream commit f7fea075edfa085c25eb34c44ceacf3602537f98 ] Maintenance patch for native DSD support. Remove incorrect T+A device quirks. Move set of device quirks to vendor quirks. Add set of missing device and vendor quirks. Signed-off-by: Jussi Laako <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Fan <[email protected]> Date: Mon Aug 21 10:39:27 2023 +0800 amba: bus: fix refcount leak [ Upstream commit e312cbdc11305568554a9e18a2ea5c2492c183f3 ] commit 5de1540b7bc4 ("drivers/amba: create devices from device tree") increases the refcount of of_node, but not releases it in amba_device_release, so there is refcount leak. By using of_node_put to avoid refcount leak. Fixes: 5de1540b7bc4 ("drivers/amba: create devices from device tree") Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mark Brown <[email protected]> Date: Mon Jul 31 14:58:48 2023 +0100 arm64/fpsimd: Only provide the length to cpufeature for xCR registers [ Upstream commit 01948b09edc3fecf8486c57c2d2fb8b80886f3d0 ] For both SVE and SME we abuse the generic register field comparison support in the cpufeature code as part of our detection of unsupported variations in the vector lengths available to PEs, reporting the maximum vector lengths via ZCR_EL1.LEN and SMCR_EL1.LEN. Since these are configuration registers rather than identification registers the assumptions the cpufeature code makes about how unknown bitfields behave are invalid, leading to warnings when SME features like FA64 are enabled and we hotplug a CPU: CPU features: SANITY CHECK: Unexpected variation in SYS_SMCR_EL1. Boot CPU: 0x0000000000000f, CPU3: 0x0000008000000f CPU features: Unsupported CPU feature variation detected. SVE has no controls other than the vector length so is not yet impacted but the same issue will apply there if any are defined. Since the only field we are interested in having the cpufeature code handle is the length field and we use a custom read function to obtain the value we can avoid these warnings by filtering out all other bits when we return the register value, if we're doing that we don't need to bother reading the register at all and can simply use the RDVL/RDSVL value we were filling in instead. Fixes: 2e0f2478ea37 ("arm64/sve: Probe SVE capabilities and usable vector lengths") FixeS: b42990d3bf77 ("arm64/sme: Identify supported SME vector lengths at boot") Signed-off-by: Mark Brown <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Mon Jul 17 19:55:05 2023 +0200 arm64/ptrace: Clean up error handling path in sve_set_common() [ Upstream commit 5f69ca4229c7d8e23f238174827ee7aa49b0bcb2 ] All error handling paths go to 'out', except this one. Be consistent and also branch to 'out' here. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Mark Brown <[email protected]> Reviewed-by: Anshuman Khandual <[email protected]> Link: https://lore.kernel.org/r/aa61301ed2dfd079b74b37f7fede5f179ac3087a.1689616473.git.christophe.jaillet@wanadoo.fr Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mark Brown <[email protected]> Date: Tue Dec 27 13:04:35 2022 +0000 arm64/sme: Don't use streaming mode to probe the maximum SME VL [ Upstream commit fcd3d2c082b2a19da2326b2b38ba5a05536dcd32 ] During development the architecture added the RDSVL instruction which means we do not need to enter streaming mode to enumerate the SME VLs, use it when we probe the maximum supported VL. Other users were already updated. No functional change. Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Stable-dep-of: 01948b09edc3 ("arm64/fpsimd: Only provide the length to cpufeature for xCR registers") Signed-off-by: Sasha Levin <[email protected]>
Author: Will Deacon <[email protected]> Date: Thu Sep 7 09:54:11 2023 +0100 arm64: csum: Fix OoB access in IP checksum code for negative lengths commit 8bd795fedb8450ecbef18eeadbd23ed8fc7630f5 upstream. Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length calls") added an early return for zero-length input, syzkaller has popped up with an example of a _negative_ length which causes an undefined shift and an out-of-bounds read: | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975 | | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 | Call trace: | dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 | show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 | __dump_stack lib/dump_stack.c:88 [inline] | dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 | print_address_description mm/kasan/report.c:351 [inline] | print_report+0x174/0x514 mm/kasan/report.c:462 | kasan_report+0xd4/0x130 mm/kasan/report.c:572 | kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 | __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31 | do_csum+0x44/0x254 arch/arm64/lib/csum.c:39 | csum_partial+0x30/0x58 lib/checksum.c:128 | gso_make_checksum include/linux/skbuff.h:4928 [inline] | __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332 | udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47 | ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119 | skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141 | __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401 | skb_gso_segment include/linux/netdevice.h:4859 [inline] | validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659 | validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709 | sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327 | __dev_xmit_skb net/core/dev.c:3805 [inline] | __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210 | dev_queue_xmit include/linux/netdevice.h:3085 [inline] | packet_xmit+0x6c/0x318 net/packet/af_packet.c:276 | packet_snd net/packet/af_packet.c:3081 [inline] | packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113 | sock_sendmsg_nosec net/socket.c:724 [inline] | sock_sendmsg net/socket.c:747 [inline] | __sys_sendto+0x3b4/0x538 net/socket.c:2144 Extend the early return to reject negative lengths as well, aligning our implementation with the generic code in lib/checksum.c Cc: Robin Murphy <[email protected]> Fixes: 5777eaed566a ("arm64: Implement optimised checksum routine") Reported-by: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bryan O'Donoghue <[email protected]> Date: Sat Aug 12 00:47:33 2023 +0100 arm64: dts: qcom: apq8016-sbc: Fix ov5640 regulator supply names [ Upstream commit 43a684580819e7f35b6cb38236be63c4cba26ef4 ] The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names. The ov5640 has depended on these names since the driver was committed upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different regulator names since its own initial commit in 2020. Perhaps the regulators were left on in previous 410c bootloaders. In any case today on 6.5 we won't switch on the ov5640 without correctly naming the regulators. Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes") Signed-off-by: Bryan O'Donoghue <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Sat Jun 17 19:15:28 2023 +0200 arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply [ Upstream commit 6a541eaa6e8e5283efb993ae7a947bede8d01fa5 ] liteon,ltr559 light sensor takes VDDIO, not VIO, supply: msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Nikita Travkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Thu Jul 20 13:53:31 2023 +0200 arm64: dts: qcom: msm8996-gemini: fix touchscreen VIO supply [ Upstream commit 21fc24ee9c5943732c9ae538766c9be93d70d936 ] According to bindings and Linux driver, there is no VDDA but VIO supply. Fixes: 4ac46b3682c5 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5") Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jun 27 18:24:27 2023 +0200 arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller [ Upstream commit 36541089c4733355ed844c67eebd0c3936953454 ] The interrupt line was previously not described. Take care of that. Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Wronek <[email protected]> Date: Sat Aug 5 15:09:37 2023 +0200 arm64: dts: qcom: msm8996: Fix dsi1 interrupts [ Upstream commit bd3b4ac11845b428996cfd2c7b8302ba6a07340d ] Fix IRQ flags mismatch which was keeping dsi1 from probing by changing interrupts = <4> to interrupts = <5>. Fixes: 2752bb7d9b58 ("arm64: dts: qcom: msm8996: add second DSI interface") Signed-off-by: David Wronek <[email protected]> Acked-by: Yassine Oudjana <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Aug 9 21:20:25 2023 +0200 arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU [ Upstream commit 7f828f3207142351750e9545527341425187de7b ] The MMSS SMMU has its own power domain. Attach it so that we can drop the "keep it always-on" hack. Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu") Reviewed-by: Jeffrey Hugo <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Aug 9 21:20:24 2023 +0200 arm64: dts: qcom: msm8998: Drop bus clock reference from MMSS SMMU [ Upstream commit a3ce236364b82688ca4c7605f63c4efd68e9589c ] The MMSS SMMU has been abusingly consuming the exposed RPM interconnect clock. Drop it. Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu") Reviewed-by: Jeffrey Hugo <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 22:00:25 2023 +0200 arm64: dts: qcom: pm6150l: Add missing short interrupt [ Upstream commit 7e1f024ef0d1da456f61d00f01dc3287ede915b3 ] Add the missing short interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['ovp'] is too short Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 22:00:26 2023 +0200 arm64: dts: qcom: pm660l: Add missing short interrupt [ Upstream commit 9a4ac09db3c7413e334b4abd6b2f6de8930dd781 ] Add the missing short interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['ovp'] is too short Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Fri Jul 7 15:30:21 2023 +0300 arm64: dts: qcom: pm8350: fix thermal zone name [ Upstream commit 64f19c06f704846db5e4885ca63c689d9bef5723 ] The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name. Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config") Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Fri Jul 7 15:30:22 2023 +0300 arm64: dts: qcom: pm8350b: fix thermal zone name [ Upstream commit aad41d9e6c44dfe299cddab97528a5333f17bdfe ] The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name. Fixes: 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config") Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 22:00:28 2023 +0200 arm64: dts: qcom: pmi8994: Add missing OVP interrupt [ Upstream commit 8db94432690371b1736e9a2566a9b3d8a73d5a97 ] Add the missing OVP interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['short'] is too short Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Fri Jul 7 15:30:24 2023 +0300 arm64: dts: qcom: pmk8350: fix ADC-TM compatible string [ Upstream commit 435a73d7377ceb29c1a22d2711dd85c831b40c45 ] The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350") for the ADC TM (thermal monitoring device) have used the compatible string from the vendor kernel ("qcom,adc-tm7"). Use the proper compatible string that is defined in the upstream kernel ("qcom,spmi-adc-tm5-gen2"). Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350") Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Fri Jul 7 15:30:23 2023 +0300 arm64: dts: qcom: pmr735b: fix thermal zone name [ Upstream commit 99f8cf491d546cd668236f573c7d846d3e94f2d6 ] The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts with the thermal zone in pmr735a.dtsi. Rename the thermal zone according to the chip name. Fixes: 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config") Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bjorn Andersson <[email protected]> Date: Tue Jun 20 13:39:14 2023 -0700 arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO [ Upstream commit 9566b5271f68bdf6e69b7c511850e3fb75cd18be ] The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on the CRD. Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device") Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Thu Aug 3 15:05:26 2023 +0200 arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins [ Upstream commit 7868ed0144b33903e16a50485775f669c109e41a ] Pins 83-86 and 158-160 are NC, so there's no point in keeping them reserved. Take care of that. Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Thu Jun 22 17:56:16 2023 +0200 arm64: dts: qcom: sc8280xp: Add missing SCM interconnect [ Upstream commit 0a69ccf20b0837db857abfc94d7e3bacf1cb771b ] The SCM interconnect path was missing. Add it. Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jun 27 19:27:50 2023 +0200 arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path [ Upstream commit 9acc60c3e2d449243e4c2126e3b56f1c4f7fd3bc ] UART6 is used for debug (routed via uSD pins) and UART9 is connected to the bluetooth chip. Set indexed aliases to make the GENI UART driver happy and route serial traffic through the debug uart by default. Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Marijn Suijten <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Thu Jul 20 11:10:48 2023 +0530 arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC [ Upstream commit 4b6ea15c0a1122422b44bf6c47a3c22fc8d46777 ] GCC and it's GDSCs are under the RPMh CX power domain. So let's add the missing RPMh power domain to the GCC node. Fixes: 6d4cf750d03a ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP") Reviewed-by: Konrad Dybcio <[email protected]> Co-developed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Thu Jul 20 11:10:49 2023 +0530 arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk" [ Upstream commit bbbef6e24bc4493602df68b052f6f48d48e3184a ] Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the downstream vendor devicetree. So fix it! https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.7.3.r1-09300-sdm845.0/arch/arm64/boot/dts/qcom/sdm845.dtsi Fixes: 433f9a57298f ("arm64: dts: sdm845: add Inline Crypto Engine registers and clock") Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Jun 14 13:35:37 2023 +0200 arm64: dts: qcom: sm6350: Fix ZAP region [ Upstream commit 44bcded2be4fe9b9d0b6e48075c9947b75c0af63 ] The previous ZAP region definition was wrong. Fix it. Note this is not a device-specific fixup, but a fixup to the generic PIL load address. Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zeyan Li <[email protected]> Date: Thu Jul 27 10:53:21 2023 +0800 arm64: dts: qcom: sm8150: Fix the I2C7 interrupt [ Upstream commit f9568d22ce06192a7e14bda3a29dc216659554ff ] I2C6 and I2C7 use the same interrupts, which is incorrect. In the downstream kernel, I2C7 has interrupts of 608 instead of 607. Fixes: 81bee6953b58 ("arm64: dts: qcom: sm8150: add i2c nodes") Signed-off-by: Zeyan Li <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jun 20 13:05:35 2023 +0200 arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs [ Upstream commit 6b8a63350752c6a5e4b54f2de6174084652cd3cd ] Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX203&206 DTSIs to better document the hardware. Diff between 203 and 206: pm8009_gpios < "CAM_PWR_LD_EN", > "NC", pm8150_gpios < "NC", > "G_ASSIST_N", < "WLC_EN_N", /* GPIO_10 */ > "NC", /* GPIO_10 */ Which is due to 5 II having an additional Google Assistant hardware button and 1 II having a wireless charger & different camera wiring to accommodate the additional 3D iToF sensor. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jun 20 13:05:34 2023 +0200 arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM [ Upstream commit 40b398beabdfe0e9088b13976e56b1dc706fe851 ] Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX203&206 DTSIs to better document the hardware. Diff between 203 and 206: < "CAM_PWR_A_CS", > "FRONTC_PWR_EN", < "CAM4_MCLK", < "TOF_RST_N", > "NC", > "NC", < "WLC_I2C_SDA", < "WLC_I2C_SCL", /* GPIO_120 */ > "NC", > "NC", < "WLC_INT_N", > "NC", Which makes sense, as 203 has a 3D iToF, slightly different camera power wiring and WLC (WireLess Charging). Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jun 20 13:05:37 2023 +0200 arm64: dts: qcom: sm8250-edo: Rectify gpio-keys [ Upstream commit a422c6a91a667b309ca1a6c08b30dbfcf7d4e866 ] Set up the corresponding GPIOs properly and add the leftover hardware buttons to mark this piece of the puzzle complete. Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys") Reviewed-by: Marijn Suijten <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Tue Jul 11 08:30:11 2023 +0200 arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again [ Upstream commit b8fbeea0253211d97c579eae787274633d3eaf0d ] gpio-keys,wakeup is a deprecated property: m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Fixes: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vincent Guittot <[email protected]> Date: Thu Jun 15 17:48:52 2023 +0200 arm64: dts: qcom: sm8250: correct dynamic power coefficients [ Upstream commit 775a5283c25d160b2a1359018c447bc518096547 ] sm8250 faces the same problem with its Energy Model as sdm845. The energy cost of LITTLE cores is reported to be higher than medium or big cores EM computes the energy with formula: energy = OPP's cost / maximum cpu capacity * utilization On v6.4-rc6 we have: max capacity of CPU0 = 284 capacity of CPU0's OPP(1612800 Hz) = 253 cost of CPU0's OPP(1612800 Hz) = 191704 max capacity of CPU4 = 871 capacity of CPU4's OPP(710400 Hz) = 255 cost of CPU4's OPP(710400 Hz) = 343217 Both OPPs have almost the same compute capacity but the estimated energy per unit of utilization will be estimated to: energy CPU0 = 191704 / 284 * 1 = 675 energy CPU4 = 343217 / 871 * 1 = 394 EM estimates that little CPU0 will consume 71% more than medium CPU4 for the same compute capacity. According to [1], little consumes 25% less than medium core for Coremark benchmark at those OPPs for the same duration. Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model for little CPUs. [1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s Fixes: 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model") Signed-off-by: Vincent Guittot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue Jul 4 14:23:17 2023 +0200 arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent [ Upstream commit 339d38a436f30d0f874815eafc7de2257346bf26 ] The PCIe hosts on SM8250 are cache-coherent. Mark them as such. Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Jul 5 15:36:23 2023 +0200 arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq [ Upstream commit 951151c2bb548e0f6b2c40ab4c48675f5342c914 ] Add the missing interrupts that communicate the hardware-managed throttling to Linux. Fixes: ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Jul 5 15:36:22 2023 +0200 arm64: dts: qcom: sm8350: Fix CPU idle state residency times [ Upstream commit 91ce3693e2fb685f31d39605a5ad1fbd940804da ] The present values look to have been copypasted from 8150 or 8180. Fix that. Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Thu Jul 6 18:35:37 2023 +0200 arm64: dts: qcom: sm8350: Use proper CPU compatibles [ Upstream commit 4390730cc12af25f7c997f477795f5f4200149c0 ] The Kryo names (once again) turned out to be fake. The CPUs report: 0x412fd050 (CA55 r2p0) (0 - 3) 0x411fd410 (CA78 r1p1) (4 - 6) 0x411fd440 (CX1 r1p1) (7) Use the compatibles that reflect that. Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Qi Zheng <[email protected]> Date: Thu Aug 10 09:32:41 2023 +0000 arm64: mm: use ptep_clear() instead of pte_clear() in clear_flush() [ Upstream commit 00de2c9f26b15f1a6f2af516dd8ec5f8d28189b7 ] In clear_flush(), the original pte may be a present entry, so we should use ptep_clear() to let page_table_check track the pte clearing operation, otherwise it may cause false positive in subsequent set_pte_at(). Link: https://lkml.kernel.org/r/[email protected] Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK") Signed-off-by: Qi Zheng <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Kefeng Wang <[email protected]> Cc: Muchun Song <[email protected]> Cc: Pasha Tatashin <[email protected]> Cc: Qi Zheng <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: D Scott Phillips <[email protected]> Date: Mon Jun 26 17:29:39 2023 -0700 arm64: sdei: abort running SDEI handlers during crash commit 5cd474e57368f0957c343bb21e309cf82826b1ef upstream. Interrupts are blocked in SDEI context, per the SDEI spec: "The client interrupts cannot preempt the event handler." If we crashed in the SDEI handler-running context (as with ACPI's AGDI) then we need to clean up the SDEI state before proceeding to the crash kernel so that the crash kernel can have working interrupts. Track the active SDEI handler per-cpu so that we can COMPLETE_AND_RESUME the handler, discarding the interrupted context. Fixes: f5df26961853 ("arm64: kernel: Add arch-specific SDEI entry code and CPU masking") Signed-off-by: D Scott Phillips <[email protected]> Cc: [email protected] Reviewed-by: James Morse <[email protected]> Tested-by: Mihai Carabas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jon Hunter <[email protected]> Date: Mon Jul 3 12:36:17 2023 +0100 arm64: tegra: Fix HSUART for Jetson AGX Orin [ Upstream commit 861dbb2b15b1049113887fb95e856f7123eea0cc ] After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") was applied, the HSUART failed to probe and the following error is seen: serial-tegra 3100000.serial: Couldn't get the reset serial-tegra: probe of 3100000.serial failed with error -2 Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") is correct because the "reset-names" property is not needed for 8250 UARTs. However, the "reset-names" is required for the HSUART and should have been populated as part of commit ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header") that enabled the HSUART for Jetson AGX Orin. Fix this by populating the "reset-names" property for the HSUART on Jetson AGX Orin. Fixes: ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header") Signed-off-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Diogo Ivo <[email protected]> Date: Fri Jul 14 11:10:17 2023 +0100 arm64: tegra: Fix HSUART for Smaug [ Upstream commit 590bfe51838f6345a6a3288507661dc9b7208464 ] After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") was applied, the HSUART failed to probe and the following error is seen: serial-tegra 70006300.serial: Couldn't get the reset serial-tegra: probe of 70006300.serial failed with error -2 Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and reset-names") is correct because the "reset-names" property is not needed for 8250 UARTs. However, the "reset-names" is required for the HSUART and should have been populated as part of commit a63c0cd83720c ("arm64: dts: tegra: smaug: Add Bluetooth node") that enabled the HSUART for the Pixel C. Fix this by populating the "reset-names" property for the HSUART on the Pixel C. Fixes: a63c0cd83720 ("arm64: dts: tegra: smaug: Add Bluetooth node") Signed-off-by: Diogo Ivo <[email protected]> Reviewed-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rob Herring <[email protected]> Date: Tue May 2 12:25:29 2023 -0500 ARM: dts: Add .dts files missing from the build [ Upstream commit 86684c2481b6e6a46c2282acee13554e34e66071 ] Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <[email protected]> Stable-dep-of: 92632115fb57 ("samples/bpf: fix bio latency check with tracepoint") Signed-off-by: Sasha Levin <[email protected]>
Author: Rafał Miłecki <[email protected]> Date: Fri Jul 7 13:40:03 2023 +0200 ARM: dts: BCM53573: Add cells sizes to PCIe node [ Upstream commit 3392ef368d9b04622fe758b1079b512664b6110a ] This fixes: arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rafał Miłecki <[email protected]> Date: Fri Jul 7 13:40:02 2023 +0200 ARM: dts: BCM53573: Drop nonexistent #usb-cells [ Upstream commit 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 ] Such property simply doesn't exist (is not documented or used anywhere). This fixes: arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rafał Miłecki <[email protected]> Date: Thu Jul 13 13:11:45 2023 +0200 ARM: dts: BCM53573: Fix Ethernet info for Luxul devices [ Upstream commit 44ad8207806973f4e4f7d870fff36cc01f494250 ] Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that use a non-default design. They don't include switch but have a single Ethernet port and BCM54210E PHY connected to the Ethernet controller's MDIO bus. Support for those devices regressed due to two changes: 1. Describing MDIO bus with switch After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Linux stopped probing for MDIO devices. 2. Dropping hardcoded BCM54210E delays In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays configuration for BCM54210E") support for other PHY modes was added but that requires a proper "phy-mode" value in DT. Both above changes are correct (they don't need to be reverted or anything) but they need this fix for DT data to be correct and for Linux to work properly. Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch") Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rafał Miłecki <[email protected]> Date: Sun Jul 23 21:54:14 2023 +0200 ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port [ Upstream commit 7141209db9c335ab261a17933809a3e660ebdc12 ] Primary Ethernet interface is connected to the port 8 (not 5). Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports") Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rafał Miłecki <[email protected]> Date: Fri Jul 7 13:40:04 2023 +0200 ARM: dts: BCM53573: Use updated "spi-gpio" binding properties [ Upstream commit 2c0fd6b3d0778ceab40205315ccef74568490f17 ] Switch away from deprecated properties. This fixes: arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]] From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected) From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xiaolei Wang <[email protected]> Date: Mon Jul 24 23:45:10 2023 +0800 ARM: dts: imx: Set default tuning step for imx7d usdhc [ Upstream commit be18293e47cbca7c6acee9231fc851601d69563a ] If the tuning step is not set, the tuning step is set to 1. For some sd cards, the following Tuning timeout will occur. Tuning failed, falling back to fixed sampling clock mmc0: Tuning failed, falling back to fixed sampling clock So set the default tuning step. This refers to the NXP vendor's commit below: https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/ arch/arm/boot/dts/imx7s.dtsi#L1216-L1217 Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting") Signed-off-by: Xiaolei Wang <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Robert Marko <[email protected]> Date: Fri Aug 11 13:01:16 2023 +0200 ARM: dts: qcom: ipq4019: correct SDHCI XO clock [ Upstream commit b5ed7a5c1fdb3981713f7b637b72aa390c3db036 ] Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct, it seems that I somehow made a mistake of passing it instead of the fixed XO clock. Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node") Signed-off-by: Robert Marko <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Fri Apr 21 11:57:21 2023 +0200 ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210 [ Upstream commit b77904ba177a9c67b6dbc3637fdf1faa22df6e5c ] Backlight is supplied by DC5V regulator. The DTS has no PMIC node, so just add a regulator-fixed to solve it and fix dtbs_check warning: s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)") Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Thu Jul 13 17:29:25 2023 +0200 ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split) [ Upstream commit cf0cb2af6a18f28b84f9f1416bff50ca60d6e98a ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: a43736deb47d ("ARM: dts: Add dts file for S3C6410-based Mini6410 board") Reviewed-by: Alim Akhtar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Thu Jul 13 17:29:26 2023 +0200 ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split) [ Upstream commit 982655cb0e7f18934d7532c32366e574ad61dbd7 ] The davicom,dm9000 Ethernet Controller accepts two reg addresses. Fixes: b672b27d232e ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards") Reviewed-by: Alim Akhtar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Tue Jul 11 15:09:07 2023 +0200 ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM [ Upstream commit deb7edbc27a6ec4d8f5edfd8519b7ed13cbd2a52 ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Thu May 18 03:12:42 2023 +0200 ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon [ Upstream commit 0ee0ef38aa9f75f21b51f729dd42b2e932515188 ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Thu May 18 03:12:43 2023 +0200 ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM [ Upstream commit 966f04a89d77548e673de2c400abe0b2cf5c15db ] Add missing "detach" mailbox to this board to permit the CPU to inform the remote processor on a detach. This signal allows the remote processor firmware to stop IPC communication and to reinitialize the resources for a re-attach. Without this mailbox, detach is not possible and kernel log contains the following warning to, so make sure all the STM32MP15xx platform DTs are in sync regarding the mailboxes to fix the detach issue and the warning: " stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach" " Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Olivier Moysan <[email protected]> Date: Tue May 30 14:45:34 2023 +0200 ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon [ Upstream commit c46e9b6cc98245f7264a8d15394d1f95d433abec ] Use STM32 ADC generic bindings instead of legacy bindings on emtrion GmbH Argon boards. The STM32 ADC specific binding to declare channels has been deprecated, hence adopt the generic IIO channels bindings, instead. The STM32MP151 device tree now exposes internal channels using the generic binding. This makes the change mandatory here to avoid a mixed use of legacy and generic binding, which is not supported by the driver. Signed-off-by: Olivier Moysan <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon") Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Tue Sep 27 00:44:37 2022 +0200 ARM: dts: stm32: Rename mdio0 to mdio [ Upstream commit a306d8962a24f4e8385853793fd58f9792c7aa61 ] Replace "mdio0" node with "mdio" to match mdio.yaml DT schema. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon") Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Tue May 30 14:45:37 2023 +0200 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems [ Upstream commit 9bcfc3cdc903485a52c6f471f4ae96a41fa51803 ] The generic ADC channel binding is recommended over legacy one, update the DT to the modern binding. No functional change. For further details, see commit which adds the generic binding to STM32 ADC binding document: '664b9879f56e ("dt-bindings: iio: stm32-adc: add generic channel binding")' Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Stable-dep-of: deb7edbc27a6 ("ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM") Signed-off-by: Sasha Levin <[email protected]>
Author: Pierre-Yves MORDRET <[email protected]> Date: Mon Apr 3 10:01:06 2023 +0200 ARM: dts: stm32: YAML validation fails for Argon Boards [ Upstream commit fc8d2b21bc5d5d7a6eadaa8c2a5d2e6856689480 ] "make dtbs_check" gives following output : stm32mp157c-emstamp-argon.dtb: gpu@59000000: 'contiguous-area' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml Signed-off-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon") Signed-off-by: Sasha Levin <[email protected]>
Author: Pierre-Yves MORDRET <[email protected]> Date: Mon Apr 3 09:58:31 2023 +0200 ARM: dts: stm32: YAML validation fails for Odyssey Boards [ Upstream commit 84a34e1862aae43e4dcdfb743a7dd3ade1fe4a3c ] "make dtbs_check" gives following output : stm32mp157c-odyssey.dt.yaml: gpu@59000000: 'contiguous-area' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml Signed-off-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Stable-dep-of: 966f04a89d77 ("ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM") Signed-off-by: Sasha Levin <[email protected]>
Author: Gustavo A. R. Silva <[email protected]> Date: Wed Jun 7 22:12:11 2023 -0600 ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch() commit 847fb80cc01a54bc827b02547bb8743bdb59ddab upstream. If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end up accessing array pwrdm->state_counter through negative index -22. This is wrong and the compiler is legitimately warning us about this potential problem. Fix this by sanity checking the value stored in variable _prev_ before accessing array pwrdm->state_counter. Address the following -Warray-bounds warning: arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds] Link: https://github.com/KSPP/linux/issues/307 Fixes: ba20bb126940 ("OMAP: PM counter infrastructure.") Cc: [email protected] Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%[email protected]/ Signed-off-by: Gustavo A. R. Silva <[email protected]> Message-ID: <ZIFVGwImU3kpaGeH@work> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kees Cook <[email protected]> Date: Thu Aug 10 12:54:18 2023 -0700 ARM: ptrace: Restore syscall restart tracing [ Upstream commit cf007647475b5090819c5fe8da771073145c7334 ] Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall"), the seccomp selftests "syscall_restart" has been broken. This was caused by the restart syscall not being stored to "abi_syscall" during restart setup before branching to the "local_restart" label. Tracers would see the wrong syscall, and scno would get overwritten while returning from the TIF_WORK path. Add the missing store. Cc: Russell King <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Lecopzer Chen <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: [email protected] Fixes: 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall") Reviewed-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kees Cook <[email protected]> Date: Thu Aug 10 12:54:19 2023 -0700 ARM: ptrace: Restore syscall skipping for tracers [ Upstream commit 4697b5848bd933f68ebd04836362c8de0cacaf71 ] Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall"), the seccomp selftests "syscall_errno" and "syscall_faked" have been broken. Both seccomp and PTRACE depend on using the special value of "-1" for skipping syscalls. This value wasn't working because it was getting masked by __NR_SYSCALL_MASK in both PTRACE_SET_SYSCALL and get_syscall_nr(). Explicitly test for -1 in PTRACE_SET_SYSCALL and get_syscall_nr(), leaving it exposed when present, allowing tracers to skip syscalls again. Cc: Russell King <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Lecopzer Chen <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: [email protected] Fixes: 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall") Reviewed-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guiting Shen <[email protected]> Date: Sat Jul 15 11:06:20 2023 +0800 ASoC: atmel: Fix the 8K sample parameter in I2SC master [ Upstream commit f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 ] The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary). So use the 6.144Mhz instead of 12.288Mhz to support 8K sample. Signed-off-by: Guiting Shen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Edgar <[email protected]> Date: Wed Jul 19 13:47:22 2023 +0800 ASoc: codecs: ES8316: Fix DMIC config [ Upstream commit d20d35d1ad62c6cca36368c1e8f29335a068659e ] According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 } Signed-off-by: Edgar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Phil Elwell <[email protected]> Date: Wed Jun 21 16:32:29 2023 +0100 ASoC: cs43130: Fix numerator/denominator mixup [ Upstream commit a9e7c964cea4fb1541cc81a11d1b2fd135f4cf38 ] In converting to using the standard u16_fract type, commit [1] made the obvious mistake and failed to take account of the difference in numerator and denominator ordering, breaking all uses of the cs43130 codec. Fix it. [1] commit e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract") Fixes: e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract") Signed-off-by: Phil Elwell <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmytro Maluka <[email protected]> Date: Mon Jul 17 21:37:37 2023 +0200 ASoC: da7219: Check for failure reading AAD IRQ events [ Upstream commit f0691dc16206f21b13c464434366e2cd632b8ed7 ] When handling an AAD interrupt, if IRQ events read failed (for example, due to i2c "Transfer while suspended" failure, i.e. when attempting to read it while DA7219 is suspended, which may happen due to a spurious AAD interrupt), the events array contains garbage uninitialized values. So instead of trying to interprete those values and doing any actions based on them (potentially resulting in misbehavior, e.g. reporting bogus events), refuse to handle the interrupt. Signed-off-by: Dmytro Maluka <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmytro Maluka <[email protected]> Date: Mon Jul 17 21:37:36 2023 +0200 ASoC: da7219: Flush pending AAD IRQ when suspending [ Upstream commit 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 ] da7219_aad_suspend() disables jack detection, which should prevent generating new interrupts by DA7219 while suspended. However, there is a theoretical possibility that there is a pending interrupt generated just before suspending DA7219 and not handled yet, so the IRQ handler may still run after DA7219 is suspended. To prevent that, wait until the pending IRQ handling is done. This patch arose as an attempt to fix the following I2C failure occurring sometimes during system suspend or resume: [ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] <TASK> [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] </TASK> which indicates that the AAD IRQ handler is unexpectedly running when DA7219 is suspended, and as a result, is trying to read data from DA7219 over I2C and is hitting the I2C driver "Transfer while suspended" failure. However, with this patch the above failure is still reproducible. So this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an IRQ unexpectedly generated after jack detection is already disabled. Signed-off-by: Dmytro Maluka <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Edson Juliano Drosdeck <[email protected]> Date: Wed Jul 19 17:02:41 2023 -0300 ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect [ Upstream commit 1bc40efdaf4a0ccfdb10a1c8e4b458f4764e8e5f ] Add a quirk mechanism to allow specifying that active-high jack-detection should be used on platforms where this info is not available in devicetree. And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that jack-detection will work properly on this laptop. Signed-off-by: Edson Juliano Drosdeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shuming Fan <[email protected]> Date: Fri Jul 21 17:06:43 2023 +0800 ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0 [ Upstream commit 02fb23d72720df2b6be3f29fc5787ca018eb92c3 ] When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shuming Fan <[email protected]> Date: Fri Jul 21 17:07:11 2023 +0800 ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0 [ Upstream commit 23adeb7056acd4fd866969f4afb91441776cc4f5 ] When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shuming Fan <[email protected]> Date: Fri Jul 21 17:06:54 2023 +0800 ASoC: rt711: fix for JD event handling in ClockStop Mode0 [ Upstream commit b69de265bd0e877015a00fbba453ef72af162e0f ] When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan <[email protected]> Reported-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vijendar Mukunda <[email protected]> Date: Wed Aug 23 13:03:39 2023 +0530 ASoC: SOF: amd: clear dsp to host interrupt status [ Upstream commit 38592ae6dc9f84b7a994c43de2136b8115ca30f6 ] DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be accessed by both ACP firmware and driver. This register contains register bits corresponds to host to dsp interrupts and vice versa. when dsp to host interrupt is reported, only clear dsp to host interrupt bit in DSP_SW_INTR_STAT_OFFSET. Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Randy Dunlap <[email protected]> Date: Fri Jun 30 21:48:36 2023 -0700 ASoC: stac9766: fix build errors with REGMAP_AC97 [ Upstream commit c70064b96f509daa78f57992aeabcf274fb2fed4 ] Select REGMAP_AC97 to fix these build errors: ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined! ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined! Fixes: 6bbf787bb70c ("ASoC: stac9766: Convert to regmap") Signed-off-by: Randy Dunlap <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Mark Brown <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Minjie Du <[email protected]> Date: Tue Jul 25 11:06:25 2023 +0800 ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer() [ Upstream commit 4139f992c49356391fb086c0c8ce51f66c26d623 ] It is possible for dma_request_chan() to return EPROBE_DEFER, which means acdev->host->dev is not ready yet. At this point dev_err() will have no output. Use dev_err_probe() instead. Signed-off-by: Minjie Du <[email protected]> Acked-by: Viresh Kumar <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gaosheng Cui <[email protected]> Date: Tue Aug 8 20:14:35 2023 +0800 audit: fix possible soft lockup in __audit_inode_child() [ Upstream commit b59bc6e37237e37eadf50cd5de369e913f524463 ] Tracefs or debugfs maybe cause hundreds to thousands of PATH records, too many PATH records maybe cause soft lockup. For example: 1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n 2. auditctl -a exit,always -S open -k key 3. sysctl -w kernel.watchdog_thresh=5 4. mkdir /sys/kernel/debug/tracing/instances/test There may be a soft lockup as follows: watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498] Kernel panic - not syncing: softlockup: hung tasks Call trace: dump_backtrace+0x0/0x30c show_stack+0x20/0x30 dump_stack+0x11c/0x174 panic+0x27c/0x494 watchdog_timer_fn+0x2bc/0x390 __run_hrtimer+0x148/0x4fc __hrtimer_run_queues+0x154/0x210 hrtimer_interrupt+0x2c4/0x760 arch_timer_handler_phys+0x48/0x60 handle_percpu_devid_irq+0xe0/0x340 __handle_domain_irq+0xbc/0x130 gic_handle_irq+0x78/0x460 el1_irq+0xb8/0x140 __audit_inode_child+0x240/0x7bc tracefs_create_file+0x1b8/0x2a0 trace_create_file+0x18/0x50 event_create_dir+0x204/0x30c __trace_add_new_event+0xac/0x100 event_trace_add_tracer+0xa0/0x130 trace_array_create_dir+0x60/0x140 trace_array_create+0x1e0/0x370 instance_mkdir+0x90/0xd0 tracefs_syscall_mkdir+0x68/0xa0 vfs_mkdir+0x21c/0x34c do_mkdirat+0x1b4/0x1d4 __arm64_sys_mkdirat+0x4c/0x60 el0_svc_common.constprop.0+0xa8/0x240 do_el0_svc+0x8c/0xc0 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Therefore, we add cond_resched() to __audit_inode_child() to fix it. Fixes: 5195d8e217a7 ("audit: dynamically allocate audit_names when not enough space is in the names array") Signed-off-by: Gaosheng Cui <[email protected]> Signed-off-by: Paul Moore <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Tue Jun 13 13:06:36 2023 +0200 backlight/bd6107: Compare against struct fb_info.device commit 992bdddaabfba19bdc77c1c7a4977b2aa41ec891 upstream. Struct bd6107_platform_data refers to a platform device within the Linux device hierarchy. The test in bd6107_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Fixes: 67b43e590415 ("backlight: Add ROHM BD6107 backlight driver") Signed-off-by: Thomas Zimmermann <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Lee Jones <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: [email protected] Cc: <[email protected]> # v3.12+ Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Tue Jun 13 13:06:38 2023 +0200 backlight/gpio_backlight: Compare against struct fb_info.device commit 7b91d017f77c1bda56f27c2f4bbb70de7c6eca08 upstream. Struct gpio_backlight_platform_data refers to a platform device within the Linux device hierarchy. The test in gpio_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: 8b770e3c9824 ("backlight: Add GPIO-based backlight driver") Cc: Laurent Pinchart <[email protected]> Cc: Rich Felker <[email protected]> Cc: John Paul Adrian Glaubitz <[email protected]> Cc: Lee Jones <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v3.12+ Reviewed-by: Sam Ravnborg <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Zimmermann <[email protected]> Date: Tue Jun 13 13:06:40 2023 +0200 backlight/lv5207lp: Compare against struct fb_info.device commit 1ca8819320fd84e7d95b04e7668efc5f9fe9fa5c upstream. Struct lv5207lp_platform_data refers to a platform device within the Linux device hierarchy. The test in lv5207lp_backlight_check_fb() compares it against the fbdev device in struct fb_info.dev, which is different. Fix the test by comparing to struct fb_info.device. Fixes a bug in the backlight driver and prepares fbdev for making struct fb_info.dev optional. v2: * move renames into separate patch (Javier, Sam, Michael) Fixes: 82e5c40d88f9 ("backlight: Add Sanyo LV5207LP backlight driver") Signed-off-by: Thomas Zimmermann <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: John Paul Adrian Glaubitz <[email protected]> Cc: Lee Jones <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v3.12+ Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zhiguo Niu <[email protected]> Date: Thu Aug 3 19:12:42 2023 +0800 block/mq-deadline: use correct way to throttling write requests [ Upstream commit d47f9717e5cfd0dd8c0ba2ecfa47c38d140f1bb6 ] The original formula was inaccurate: dd->async_depth = max(1UL, 3 * q->nr_requests / 4); For write requests, when we assign a tags from sched_tags, data->shallow_depth will be passed to sbitmap_find_bit, see the following code: nr = sbitmap_find_bit_in_word(&sb->map[index], min_t (unsigned int, __map_depth(sb, index), depth), alloc_hint, wrap); The smaller of data->shallow_depth and __map_depth(sb, index) will be used as the maximum range when allocating bits. For a mmc device (one hw queue, deadline I/O scheduler): q->nr_requests = sched_tags = 128, so according to the previous calculation method, dd->async_depth = data->shallow_depth = 96, and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5, sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or a write I/O, tags can be allocated to the maximum range each time, which has not throttling effect. In addition, refer to the methods of bfg/kyber I/O scheduler, limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift. This patch can throttle write requests really. Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests") Signed-off-by: Zhiguo Niu <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christoph Hellwig <[email protected]> Date: Fri Jul 7 11:42:38 2023 +0200 block: cleanup queue_wc_store [ Upstream commit c4e21bcd0f9d01f9c5d6c52007f5541871a5b1de ] Get rid of the local queue_wc_store variable and handling setting and clearing the QUEUE_FLAG_WC flag diretly instead the if / else if. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Stable-dep-of: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it") Signed-off-by: Sasha Levin <[email protected]>
Author: Li Lingfeng <[email protected]> Date: Thu Aug 31 15:59:00 2023 +0800 block: don't add or resize partition on the disk with GENHD_FL_NO_PART commit 1a721de8489fa559ff4471f73c58bb74ac5580d3 upstream. Commit a33df75c6328 ("block: use an xarray for disk->part_tbl") remove disk_expand_part_tbl() in add_partition(), which means all kinds of devices will support extended dynamic `dev_t`. However, some devices with GENHD_FL_NO_PART are not expected to add or resize partition. Fix this by adding check of GENHD_FL_NO_PART before add or resize partition. Fixes: a33df75c6328 ("block: use an xarray for disk->part_tbl") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christoph Hellwig <[email protected]> Date: Fri Jul 7 11:42:39 2023 +0200 block: don't allow enabling a cache on devices that don't support it [ Upstream commit 43c9835b144c7ce29efe142d662529662a9eb376 ] Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC flag on devices that never claimed the capability. Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by blk_queue_write_cache and guards re-enabling the cache through sysfs. Note that any rescan that calls blk_queue_write_cache will still re-enable the write cache as in the current code. Fixes: 93e9d8e836cb ("block: add ability to flag write back caching on a device") Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Wed Aug 23 11:46:37 2023 +0800 Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave() [ Upstream commit 2a05334d7f91ff189692089c05fc48cc1d8204de ] It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only. Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Min Li <[email protected]> Date: Mon Aug 7 19:07:41 2023 +0800 Bluetooth: Fix potential use-after-free when clear keys [ Upstream commit 3673952cf0c6cf81b06c66a0b788abeeb02ff3ae ] Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu() call. Fixes: d7d41682efc2 ("Bluetooth: Fix Suspicious RCU usage warnings") Signed-off-by: Min Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manish Mandlik <[email protected]> Date: Fri Aug 4 11:14:45 2023 -0700 Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor() [ Upstream commit a2bcd2b63271a93a695fabbfbf459c603d956d48 ] KSAN reports use-after-free in hci_add_adv_monitor(). While adding an adv monitor, hci_add_adv_monitor() calls -> msft_add_monitor_pattern() calls -> msft_add_monitor_sync() calls -> msft_le_monitor_advertisement_cb() calls in an error case -> hci_free_adv_monitor() which frees the *moniter. This is referenced by bt_dev_dbg() in hci_add_adv_monitor(). Fix the bt_dev_dbg() by using handle instead of monitor->handle. Fixes: b747a83690c8 ("Bluetooth: hci_sync: Refactor add Adv Monitor") Signed-off-by: Manish Mandlik <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Douglas Anderson <[email protected]> Date: Fri Jun 30 15:33:15 2023 -0700 Bluetooth: hci_sync: Don't double print name in add/remove adv_monitor [ Upstream commit 6f55eea116ba3646fb5fbb31de703f8cf79d8214 ] The hci_add_adv_monitor() hci_remove_adv_monitor() functions call bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro automatically adds in the device's name. That means that we shouldn't include the name in the bt_dev_dbg() calls. Suggested-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Stable-dep-of: a2bcd2b63271 ("Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()") Signed-off-by: Sasha Levin <[email protected]>
Author: Yuanjun Gong <[email protected]> Date: Wed Jul 26 21:30:00 2023 +0800 Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe() [ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ] in nokia_bluetooth_serdev_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Yuanjun Gong <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Christensen <[email protected]> Date: Thu Jun 8 16:01:43 2023 -0400 bnx2x: fix page fault following EEH recovery [ Upstream commit 7ebe4eda4265642859507d1b3ca330d8c196cfe5 ] In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference. This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface. Signed-off-by: David Christensen <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yafang Shao <[email protected]> Date: Sun Jul 9 02:56:25 2023 +0000 bpf: Clear the probe_addr for uprobe [ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ] To avoid returning uninitialized or random values when querying the file descriptor (fd) and accessing probe_addr, it is necessary to clear the variable prior to its use. Fixes: 41bdc4b40ed6 ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY") Signed-off-by: Yafang Shao <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yafang Shao <[email protected]> Date: Thu Jul 13 02:56:41 2023 +0000 bpf: Fix an error in verifying a field in a union [ Upstream commit 33937607efa050d9e237e0c4ac4ada02d961c466 ] We are utilizing BPF LSM to monitor BPF operations within our container environment. When we add support for raw_tracepoint, it hits below error. ; (const void *)attr->raw_tracepoint.name); 27: (79) r3 = *(u64 *)(r2 +0) access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8 It can be reproduced with below BPF prog. SEC("lsm/bpf") int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size) { switch (cmd) { case BPF_RAW_TRACEPOINT_OPEN: bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name); break; default: break; } return 0; } The reason is that when accessing a field in a union, such as bpf_attr, if the field is located within a nested struct that is not the first member of the union, it can result in incorrect field verification. union bpf_attr { struct { __u32 map_type; <<<< Actually it will find that field. __u32 key_size; __u32 value_size; ... }; ... struct { __u64 name; <<<< We want to verify this field. __u32 prog_fd; } raw_tracepoint; }; Considering the potential deep nesting levels, finding a perfect solution to address this issue has proven challenging. Therefore, I propose a solution where we simply skip the verification process if the field in question is located within a union. Fixes: 7e3617a72df3 ("bpf: Add array support to btf_struct_access") Signed-off-by: Yafang Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yafang Shao <[email protected]> Date: Wed Aug 23 02:07:02 2023 +0000 bpf: Fix issue in verifying allow_ptr_leaks commit d75e30dddf73449bc2d10bb8e2f1a2c446bc67a2 upstream. After we converted the capabilities of our networking-bpf program from cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program failed to start. Because it failed the bpf verifier, and the error log is "R3 pointer comparison prohibited". A simple reproducer as follows, SEC("cls-ingress") int ingress(struct __sk_buff *skb) { struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr); if ((long)(iph + 1) > (long)skb->data_end) return TC_ACT_STOLEN; return TC_ACT_OK; } Per discussion with Yonghong and Alexei [1], comparison of two packet pointers is not a pointer leak. This patch fixes it. Our local kernel is 6.1.y and we expect this fix to be backported to 6.1.y, so stable is CCed. [1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ Suggested-by: Yonghong Song <[email protected]> Suggested-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yafang Shao <[email protected]> Acked-by: Eduard Zingerman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lorenz Bauer <[email protected]> Date: Thu Jul 20 17:30:06 2023 +0200 bpf: reject unhashed sockets in bpf_sk_assign [ Upstream commit 67312adc96b5a585970d03b62412847afe2c6b01 ] The semantics for bpf_sk_assign are as follows: sk = some_lookup_func() bpf_sk_assign(skb, sk) bpf_sk_release(sk) That is, the sk is not consumed by bpf_sk_assign. The function therefore needs to make sure that sk lives long enough to be consumed from __inet_lookup_skb. The path through the stack for a TCPv4 packet is roughly: netif_receive_skb_core: takes RCU read lock __netif_receive_skb_core: sch_handle_ingress: tcf_classify: bpf_sk_assign() deliver_ptype_list_skb: deliver_skb: ip_packet_type->func == ip_rcv: ip_rcv_core: ip_rcv_finish_core: dst_input: ip_local_deliver: ip_local_deliver_finish: ip_protocol_deliver_rcu: tcp_v4_rcv: __inet_lookup_skb: skb_steal_sock The existing helper takes advantage of the fact that everything happens in the same RCU critical section: for sockets with SOCK_RCU_FREE set bpf_sk_assign never takes a reference. skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put if necessary. This approach assumes that SOCK_RCU_FREE is never set on a sk between bpf_sk_assign and skb_steal_sock, but this invariant is violated by unhashed UDP sockets. A new UDP socket is created in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only added in udp_lib_get_port() which happens when a socket is bound. When bpf_sk_assign was added it wasn't possible to access unhashed UDP sockets from BPF, so this wasn't a problem. This changed in commit 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets"), but the helper wasn't adjusted accordingly. The following sequence of events will therefore lead to a refcount leak: 1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap. 2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount. 3. bind() or connect() the socket, setting SOCK_RCU_FREE. 4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE. 5. tcp_v4_rcv() skips sock_put(). Fix the problem by rejecting unhashed sockets in bpf_sk_assign(). This matches the behaviour of __inet_lookup_skb which is ultimately the goal of bpf_sk_assign(). Fixes: cf7fbe660f2d ("bpf: Add socket assign support") Cc: Joe Stringer <[email protected]> Signed-off-by: Lorenz Bauer <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Lobakin <[email protected]> Date: Fri Jul 7 10:54:23 2023 +0100 bpftool: Define a local bpf_perf_link to fix accessing its fields [ Upstream commit 67a43462ee2405c94e985a747bdcb8e3a0d66203 ] When building bpftool with !CONFIG_PERF_EVENTS: skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link' perf_link = container_of(link, struct bpf_perf_link, link); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of' ((type *)(__mptr - offsetof(type, member))); \ ^~~~~~~~~~~~~~~~~~~~~~ tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof' #define offsetof(TYPE, MEMBER) ((unsigned long)&((TYPE *)0)->MEMBER) ~~~~~~~~~~~^ skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link' struct bpf_perf_link *perf_link; ^ &bpf_perf_link is being defined and used only under the ifdef. Define struct bpf_perf_link___local with the `preserve_access_index` attribute inside the pid_iter BPF prog to allow compiling on any configs. CO-RE will substitute it with the real struct bpf_perf_link accesses later on. container_of() uses offsetof(), which does the necessary CO-RE relocation if the field is specified with `preserve_access_index` - as is the case for struct bpf_perf_link___local. Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output") Suggested-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Lobakin <[email protected]> Date: Fri Jul 7 10:54:25 2023 +0100 bpftool: Use a local bpf_perf_event_value to fix accessing its fields [ Upstream commit 658ac06801315b739774a15796ff06913ef5cad5 ] Fix the following error when building bpftool: CLANG profiler.bpf.o CLANG pid_iter.bpf.o skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value' __uint(value_size, sizeof(struct bpf_perf_event_value)); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint' tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value' struct bpf_perf_event_value; ^ struct bpf_perf_event_value is being used in the kernel only when CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then. Define struct bpf_perf_event_value___local with the `preserve_access_index` attribute inside the pid_iter BPF prog to allow compiling on any configs. It is a full mirror of a UAPI structure, so is compatible both with and w/o CO-RE. bpf_perf_event_read_value() requires a pointer of the original type, so a cast is needed. Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command") Suggested-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Quentin Monnet <[email protected]> Date: Fri Jul 7 10:54:24 2023 +0100 bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c [ Upstream commit 44ba7b30e84fb40da2295e85a6d209e199fdc977 ] In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile correctly on hosts where vmlinux.h does not define BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for example), define and use a local copy of the enum value. This requires LLVM 12 or newer to build the BPF program. Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output") Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Lobakin <[email protected]> Date: Fri Jul 7 10:54:22 2023 +0100 bpftool: use a local copy of perf_event to fix accessing :: Bpf_cookie [ Upstream commit 4cbeeb0dc02f8ac7b975b2ab0080ace53d43d62a ] When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty. However, the structure is being used by bpftool indirectly via BTF. This leads to: skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event' return BPF_CORE_READ(event, bpf_cookie); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~ ... skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long') return BPF_CORE_READ(event, bpf_cookie); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tools and samples can't use any CONFIG_ definitions, so the fields used there should always be present. Define struct perf_event___local with the `preserve_access_index` attribute inside the pid_iter BPF prog to allow compiling on any configs. CO-RE will substitute it with the real struct perf_event accesses later on. Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output") Suggested-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexander Lobakin <[email protected]> Signed-off-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Lindgren <[email protected]> Date: Fri Aug 4 13:38:01 2023 +0300 bus: ti-sysc: Fix build warning for 64-bit build [ Upstream commit e1e1e9bb9d943ec690670a609a5f660ca10eaf85 ] Fix "warning: cast from pointer to integer of different size" on 64-bit builds. Note that this is a cosmetic fix at this point as the driver is not yet used for 64-bit systems. Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling") Reviewed-by: Dhruva Gole <[email protected]> Reviewed-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tony Lindgren <[email protected]> Date: Tue Aug 15 08:49:05 2023 +0300 bus: ti-sysc: Fix cast to enum warning [ Upstream commit de44bf2f7683347f75690ef6cf61a1d5ba8f0891 ] Fix warning for "cast to smaller integer type 'enum sysc_soc' from 'const void *'". Cc: Nishanth Menon <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: e1e1e9bb9d94 ("bus: ti-sysc: Fix build warning for 64-bit build") Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marc Kleine-Budde <[email protected]> Date: Tue Jul 4 11:23:37 2023 +0200 can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM [ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Waiman Long <[email protected]> Date: Tue Jun 27 10:35:00 2023 -0400 cgroup/cpuset: Inherit parent's load balance state in v2 [ Upstream commit c8c926200c55454101f072a4b16c9ff5b8c9e56f ] Since commit f28e22441f35 ("cgroup/cpuset: Add a new isolated cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset can be on or off. The child cpusets of a partition root must have the same setting as its parent or it may screw up the rebuilding of sched domains. Fix this problem by making sure the a child v2 cpuset will follows its parent cpuset load balance state unless the child cpuset is a new partition root itself. Fixes: f28e22441f35 ("cgroup/cpuset: Add a new isolated cpus.partition type") Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lu Jialin <[email protected]> Date: Thu Aug 10 11:25:28 2023 +0000 cgroup:namespace: Remove unused cgroup_namespaces_init() [ Upstream commit 82b90b6c5b38e457c7081d50dff11ecbafc1e61a ] cgroup_namspace_init() just return 0. Therefore, there is no need to call it during start_kernel. Just remove it. Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces") Signed-off-by: Lu Jialin <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shyam Prasad N <[email protected]> Date: Fri Jun 9 17:46:58 2023 +0000 cifs: fix max_credits implementation [ Upstream commit 5e90aa21eb1372736e08cee0c0bf47735c5c4b95 ] The current implementation of max_credits on the client does not work because the CreditRequest logic for several commands does not take max_credits into account. Still, we can end up asking the server for more credits, depending on the number of credits in flight. For this, we need to limit the credits while parsing the responses too. Signed-off-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Shyam Prasad N <[email protected]> Date: Fri Jun 9 17:46:59 2023 +0000 cifs: fix sockaddr comparison in iface_cmp [ Upstream commit 2991b77409891e14a10b96899755c004b0c07edb ] iface_cmp used to simply do a memcmp of the two provided struct sockaddrs. The comparison needs to do more based on the address family. Similar logic was already present in cifs_match_ipaddr. Doing something similar now. Signed-off-by: Shyam Prasad N <[email protected]> Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nathan Chancellor <[email protected]> Date: Wed Mar 8 13:47:11 2023 -0700 clk: Avoid invalid function names in CLK_OF_DECLARE() commit 5cf9d015be160e2d90d29ae74ef1364390e8fce8 upstream. After commit c28cd1f3433c ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro"), drivers/clk/mvebu/kirkwood.c fails to build: drivers/clk/mvebu/kirkwood.c:358:1: error: expected identifier or '(' CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock", ^ include/linux/clk-provider.h:1367:21: note: expanded from macro 'CLK_OF_DECLARE' static void __init name##_of_clk_init_declare(struct device_node *np) \ ^ <scratch space>:124:1: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ drivers/clk/mvebu/kirkwood.c:358:1: error: invalid digit 'd' in decimal constant include/linux/clk-provider.h:1372:34: note: expanded from macro 'CLK_OF_DECLARE' OF_DECLARE_1(clk, name, compat, name##_of_clk_init_declare) ^ <scratch space>:125:3: note: expanded from here 98dx1135_clk_of_clk_init_declare ^ C function names must start with either an alphabetic letter or an underscore. To avoid generating invalid function names from clock names, add two underscores to the beginning of the identifier. Fixes: c28cd1f3433c ("clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro") Suggested-by: Saravana Kannan <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Saravana Kannan <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baoquan He <[email protected]> Date: Fri Jul 7 21:58:51 2023 +0800 clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM [ Upstream commit e7dd44f4f3166db45248414f5df8f615392de47a ] On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset: ------ ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup': clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap' ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap' ------ Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Baoquan He <[email protected]> Cc: Michael Turquette <[email protected]> Cc: Stephen Boyd <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marco Felsch <[email protected]> Date: Mon Jul 31 16:21:49 2023 +0200 clk: imx8mp: fix sai4 clock [ Upstream commit c30f600f1f41dcf5ef0fb02e9a201f9b2e8f31bd ] The reference manual don't mention a SAI4 hardware block. This would be clock slice 78 which is skipped (TRM, page 237). Remove any reference to this clock to align the driver with the reality. Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver") Acked-by: Stephen Boyd <[email protected]> Signed-off-by: Marco Felsch <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ahmad Fatoum <[email protected]> Date: Mon Aug 7 10:22:00 2023 +0200 clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op [ Upstream commit 4dd432d985ef258e3bc436e568fba4b987b59171 ] Reconfiguring the clock divider to the exact same value is observed on an i.MX8MN to often cause a longer than usual clock pause, probably because the divider restarts counting whenever the register is rewritten. This issue doesn't show up normally, because the clock framework will take care to not call set_rate when the clock rate is the same. However, when we reconfigure an upstream clock, the common code will call set_rate with the newly calculated rate on all children, e.g.: - sai5 is running normally and divides Audio PLL out by 16. - Audio PLL rate is increased by 32Hz (glitch-free kdiv change) - rates for children are recalculated and rates are set recursively - imx8m_clk_composite_divider_set_rate(sai5) is called with 32/16 = 2Hz more - imx8m_clk_composite_divider_set_rate computes same divider as before - divider register is written, so it restarts counting from zero and MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns. Some external clock consumers can be upset by such unexpected clock pauses, so let's make sure we only rewrite the divider value when the value to be written is actually different. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Ahmad Fatoum <[email protected]> Reviewed-by: Peng Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Fan <[email protected]> Date: Sun Jun 25 20:33:40 2023 +0800 clk: imx: imx8ulp: update SPLL2 type [ Upstream commit 7653a59be8af043adc4c09473975a860e6055ff9 ] The SPLL2 on iMX8ULP is different with other frac PLLs, it can support VCO from 650Mhz to 1Ghz. Following the changes to pllv4, use the new type IMX_PLLV4_IMX8ULP_1GHZ. Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ye Li <[email protected]> Date: Sun Jun 25 20:33:39 2023 +0800 clk: imx: pllv4: Fix SPLL2 MULT range [ Upstream commit 3f0cdb945471f1abd1cf4d172190e9c489c5052a ] The SPLL2 on iMX8ULP is different with other frac PLLs, it can support VCO from 650Mhz to 1Ghz. According to RM, the MULT is using a range from 27 to 54, not some fixed values. If using current PLL implementation, some clock rate can't be supported. Fix the issue by adding new type for the SPLL2 and use MULT range to replace MULT table Fixes: 5f0601c47c33 ("clk: imx: Update the pllv4 to support imx8ulp") Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Jacky Bai <[email protected]> Signed-off-by: Ye Li <[email protected]> Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Saravana Kannan <[email protected]> Date: Wed Mar 1 17:46:38 2023 -0800 clk: Mark a fwnode as initialized when using CLK_OF_DECLARE() macro commit c28cd1f3433c7e339315d1ddacaeacf0fdfbe252 upstream. We already mark fwnodes as initialized when they are registered as clock providers. We do this so that fw_devlink can tell when a clock driver doesn't use the driver core framework to probe/initialize its device. This ensures fw_devlink doesn't block the consumers of such a clock provider indefinitely. However, some users of CLK_OF_DECLARE() macros don't use the same node that matches the macro as the node for the clock provider, but they initialize the entire node. To cover these cases, also mark the nodes that match the macros as initialized when the init callback function is called. An example of this is "stericsson,u8500-clks" that's handled using CLK_OF_DECLARE() and looks something like this: clocks { compatible = "stericsson,u8500-clks"; prcmu_clk: prcmu-clock { #clock-cells = <1>; }; prcc_pclk: prcc-periph-clock { #clock-cells = <2>; }; prcc_kclk: prcc-kernel-clock { #clock-cells = <2>; }; prcc_reset: prcc-reset-controller { #reset-cells = <2>; }; ... }; This patch makes sure that "clocks" is marked as initialized so that fw_devlink knows that all nodes under it have been initialized. If the driver creates struct devices for some of the subnodes, fw_devlink is smart enough to know to wait for those devices to probe, so no special handling is required for those cases. Cc: Greg Kroah-Hartman <[email protected]> Reported-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/lkml/CACRpkdamxDX6EBVjKX5=D3rkHp17f5pwGdBVhzFU90-0MHY6dQ@mail.gmail.com/ Fixes: 4a032827daa8 ("of: property: Simplify of_link_to_phandle()") Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Linus Walleij <[email protected]> Tested-by: Linus Walleij <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: David Wronek <[email protected]> Date: Sun Jul 23 21:05:02 2023 +0200 clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src [ Upstream commit fd0b5ba87ad5709f0fd3d2bc4b7870494a75f96a ] Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: David Wronek <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrew Halaney <[email protected]> Date: Thu Apr 13 14:15:39 2023 -0500 clk: qcom: gcc-sc8280xp: Add EMAC GDSCs [ Upstream commit 32c2f2a46db1322caaf78d5ea747ed5c56d2e353 ] Add the EMAC GDSCs to allow the EMAC hardware to be enabled. Acked-by: Stephen Boyd <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Tested-by: Brian Masney <[email protected]> Signed-off-by: Andrew Halaney <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: 2fd02de27054 ("clk: qcom: gcc-sc8280xp: Add missing GDSC flags") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 19:48:06 2023 +0200 clk: qcom: gcc-sc8280xp: Add missing GDSC flags [ Upstream commit 2fd02de27054576a4a8c89302e2f77122c55e957 ] All of the 8280's GCC GDSCs can and should use the retain registers so as not to lose their state when entering lower power modes. Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver") Signed-off-by: Konrad Dybcio <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 19:48:08 2023 +0200 clk: qcom: gcc-sc8280xp: Add missing GDSCs [ Upstream commit 4712eb7ff85bd3dd09c6668b8de4080e02b3eea9 ] There are 10 more GDSCs that we've not been caring about, and by extension (and perhaps even more importantly), not putting to sleep. Add them. Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver") Signed-off-by: Konrad Dybcio <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luca Weiss <[email protected]> Date: Fri Aug 4 16:09:30 2023 +0200 clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src [ Upstream commit df04d166d1f346dbf740bbea64a3bed3e7f14c8d ] GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error when booting. Set .flags = CLK_OPS_PARENT_ENABLE to fix the error. Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver") Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Patrick Whewell <[email protected]> Date: Wed Aug 2 14:04:00 2023 -0700 clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src [ Upstream commit 783cb693828ce487cf0bc6ad16cbcf2caae6f8d9 ] GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg didn't update its configuration" error when booting. Set .flags = CLK_OPS_PARENT_ENABLE to fix the error. Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Patrick Whewell <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Fri Aug 11 19:35:53 2023 +0200 clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs [ Upstream commit a27ac3806b0a0e6954fb5967223b8635242e5b8f ] Use the floor ops to prevent warnings like this at suspend exit and boot: mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Jun 14 13:35:33 2023 +0200 clk: qcom: gpucc-sm6350: Fix clock source names [ Upstream commit 743913b343a3ec2510fe3c0dfaff03d049659922 ] fw_name for GCC inputs didn't match the bindings. Fix it. Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Wed Jun 14 13:35:32 2023 +0200 clk: qcom: gpucc-sm6350: Introduce index-based clk lookup [ Upstream commit f6f89d194e4ddcfe197ac8a05ed4161f642a5c68 ] Add the nowadays-prefered and marginally faster way of looking up parent clocks in the device tree. It also allows for clock-names-independent operation, so long as the order (which is enforced by schema) is kept. Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Stable-dep-of: 743913b343a3 ("clk: qcom: gpucc-sm6350: Fix clock source names") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Fri Jul 28 09:57:38 2023 +0200 clk: qcom: reset: Use the correct type of sleep/delay based on length [ Upstream commit 181b66ee7cdd824797fc99b53bec29cf5630a04f ] Use the fsleep() helper that (based on the length of the delay, see: [1]) chooses the correct sleep/delay functions. [1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alibek Omarov <[email protected]> Date: Wed Jun 14 16:47:50 2023 +0300 clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz [ Upstream commit dafebd0f9a4f56b10d7fbda0bff1f540d16a2ea4 ] PLL rate on RK356x is calculated through the simple formula: ((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2) The PLL rate setting for 78.75MHz seems to be copied from 96MHz so this patch fixes it and configures it properly. Signed-off-by: Alibek Omarov <[email protected]> Fixes: 842f4cb72639 ("clk: rockchip: Add more PLL rates for rk3568") Reviewed-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Jianhua <[email protected]> Date: Sat Jul 22 15:31:07 2023 +0000 clk: sunxi-ng: Modify mismatched function name [ Upstream commit 075d9ca5b4e17f84fd1c744a405e69ec743be7f0 ] No functional modification involved. drivers/clk/sunxi-ng/ccu_mmc_timing.c:54: warning: expecting prototype for sunxi_ccu_set_mmc_timing_mode(). Prototype was for sunxi_ccu_get_mmc_timing_mode() instead Fixes: f6f64ed868d3 ("clk: sunxi-ng: Add interface to query or configure MMC timing modes.") Signed-off-by: Zhang Jianhua <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ruidong Tian <[email protected]> Date: Fri Aug 4 16:15:14 2023 +0800 coresight: tmc: Explicit type conversions to prevent integer overflow [ Upstream commit fd380097cdb305582b7a1f9476391330299d2c59 ] Perf cs_etm session executed unexpectedly when AUX buffer > 1G. perf record -C 0 -m ,2G -e cs_etm// -- <workload> [ perf record: Captured and wrote 2.615 MB perf.data ] Perf only collect about 2M perf data rather than 2G. This is becasuse the operation, "nr_pages << PAGE_SHIFT", in coresight tmc driver, will overflow when nr_pages >= 0x80000(correspond to 1G AUX buffer). The overflow cause buffer allocation to fail, and TMC driver will alloc minimal buffer size(1M). You can just get about 2M perf data(1M AUX buffer + perf data header) at least. Explicit convert nr_pages to 64 bit to avoid overflow. Fixes: 22f429f19c41 ("coresight: etm-perf: Add support for ETR backend") Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework") Fixes: 2e499bbc1a92 ("coresight: tmc: implementing TMC-ETF AUX space API") Signed-off-by: Ruidong Tian <[email protected]> Reviewed-by: James Clark <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Junhao He <[email protected]> Date: Fri Aug 18 16:40:52 2023 +0800 coresight: trbe: Fix TRBE potential sleep in atomic context [ Upstream commit c0a232f1e19e378c5c4e5973a996392942c80090 ] smp_call_function_single() will allocate an IPI interrupt vector to the target processor and send a function call request to the interrupt vector. After the target processor receives the IPI interrupt, it will execute arm_trbe_remove_coresight_cpu() call request in the interrupt handler. According to the device_unregister() stack information, if other process is useing the device, the down_write() may sleep, and trigger deadlocks or unexpected errors. arm_trbe_remove_coresight_cpu coresight_unregister device_unregister device_del kobject_del __kobject_del sysfs_remove_dir kernfs_remove down_write ---------> it may sleep Add a helper arm_trbe_disable_cpu() to disable TRBE precpu irq and reset per TRBE. Simply call arm_trbe_remove_coresight_cpu() directly without useing the smp_call_function_single(), which is the same as registering the TRBE coresight device. Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver") Signed-off-by: Junhao He <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ Remove duplicate cpumask checks during removal ] Signed-off-by: Suzuki K Poulose <[email protected]> [ v3 - Remove the operation of assigning NULL to cpudata->drvdata ] Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Thomas Gleixner <[email protected]> Date: Wed Aug 23 10:47:02 2023 +0200 cpu/hotplug: Prevent self deadlock on CPU hot-unplug commit 2b8272ff4a70b866106ae13c36be7ecbef5d5da2 upstream. Xiongfeng reported and debugged a self deadlock of the task which initiates and controls a CPU hot-unplug operation vs. the CFS bandwidth timer. CPU1 CPU2 T1 sets cfs_quota starts hrtimer cfs_bandwidth 'period_timer' T1 is migrated to CPU2 T1 initiates offlining of CPU1 Hotplug operation starts ... 'period_timer' expires and is re-enqueued on CPU1 ... take_cpu_down() CPU1 shuts down and does not handle timers anymore. They have to be migrated in the post dead hotplug steps by the control task. T1 runs the post dead offline operation T1 is scheduled out T1 waits for 'period_timer' to expire T1 waits there forever if it is scheduled out before it can execute the hrtimer offline callback hrtimers_dead_cpu(). Cure this by delegating the hotplug control operation to a worker thread on an online CPU. This takes the initiating user space task, which might be affected by the bandwidth timer, completely out of the picture. Reported-by: Xiongfeng Wang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Yu Liao <[email protected]> Acked-by: Vincent Guittot <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/lkml/[email protected] Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Swapnil Sapkal <[email protected]> Date: Fri Aug 18 11:44:52 2023 +0000 cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver [ Upstream commit 60dd283804479c4a52f995b713f448e2cd65b8c8 ] After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf() and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy of the CPU and mark it as busy. In these functions, cpufreq_cpu_put() should be used to release the policy, but it is not, so any other entity trying to access the policy is blocked indefinitely. One such scenario is when amd_pstate mode is changed, leading to the following splat: [ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds. [ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5 [ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006 [ 1332.123143] Call Trace: [ 1332.123145] <TASK> [ 1332.123148] __schedule+0x3c1/0x16a0 [ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70 [ 1332.123157] schedule+0x6f/0x110 [ 1332.123160] schedule_timeout+0x14f/0x160 [ 1332.123162] ? preempt_count_add+0x86/0xd0 [ 1332.123165] __wait_for_common+0x92/0x190 [ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10 [ 1332.123170] wait_for_completion+0x28/0x30 [ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90 [ 1332.123177] cpufreq_policy_free+0x157/0x1d0 [ 1332.123178] ? preempt_count_add+0x58/0xd0 [ 1332.123180] cpufreq_remove_dev+0xb6/0x100 [ 1332.123182] subsys_interface_unregister+0x114/0x120 [ 1332.123185] ? preempt_count_add+0x58/0xd0 [ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10 [ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0 [ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50 [ 1332.123194] store_status+0xe9/0x180 [ 1332.123197] dev_attr_store+0x1b/0x30 [ 1332.123199] sysfs_kf_write+0x42/0x50 [ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0 [ 1332.123204] vfs_write+0x2df/0x400 [ 1332.123208] ksys_write+0x6b/0xf0 [ 1332.123210] __x64_sys_write+0x1d/0x30 [ 1332.123213] do_syscall_64+0x60/0x90 [ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50 [ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0 [ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20 [ 1332.123225] ? irqentry_exit+0x3f/0x50 [ 1332.123226] ? exc_page_fault+0x8e/0x190 [ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1332.123232] RIP: 0033:0x7fa74c514a37 [ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37 [ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001 [ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff [ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 [ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00 [ 1332.123247] </TASK> Fix this by calling cpufreq_cpu_put() wherever necessary. Fixes: 14eb1c96e3a3 ("cpufreq: amd-pstate: Add test module for amd-pstate driver") Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Meng Li <[email protected]> Reviewed-by: Wyes Karny <[email protected]> Suggested-by: Wyes Karny <[email protected]> Signed-off-by: Swapnil Sapkal <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Swapnil Sapkal <[email protected]> Date: Fri Aug 18 11:44:51 2023 +0000 cpufreq: amd-pstate-ut: Remove module parameter access [ Upstream commit 8d6e5e8268e89979d86501dbb8385ce2e6154de1 ] In amd-pstate-ut, shared memory-based systems call get_shared_mem() as part of amd_pstate_ut_check_enabled() function. This function was written when CONFIG_X86_AMD_PSTATE was tristate config and amd_pstate can be built as a module. Currently CONFIG_X86_AMD_PSTATE is a boolean config and module parameter shared_mem is removed. But amd-pstate-ut code still accesses this module parameter. Remove those accesses. Fixes: 456ca88d8a52 ("cpufreq: amd-pstate: change amd-pstate driver to be built-in type") Reviewed-by: Mario Limonciello <[email protected]> Reviewed-by: Meng Li <[email protected]> Reviewed-by: Wyes Karny <[email protected]> Suggested-by: Wyes Karny <[email protected]> Signed-off-by: Swapnil Sapkal <[email protected]> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gustavo A. R. Silva <[email protected]> Date: Mon Jul 31 21:15:48 2023 -0600 cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug commit e520d0b6be950ce3738cf4b9bd3b392be818f1dc upstream. Allocate extra space for terminating element at: drivers/cpufreq/brcmstb-avs-cpufreq.c: 449 table[i].frequency = CPUFREQ_TABLE_END; and add code comment to make this clear. This fixes the following -Warray-bounds warning seen after building ARM with multi_v7_defconfig (GCC 13): In function 'brcm_avs_get_freq_table', inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15: drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=] 449 | table[i].frequency = CPUFREQ_TABLE_END; In file included from include/linux/node.h:18, from include/linux/cpu.h:17, from include/linux/cpufreq.h:12, from drivers/cpufreq/brcmstb-avs-cpufreq.c:44: In function 'devm_kmalloc_array', inlined from 'devm_kcalloc' at include/linux/device.h:328:9, inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10, inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15: include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc' 323 | return devm_kmalloc(dev, bytes, flags); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -Warray-bounds. Link: https://github.com/KSPP/linux/issues/324 Fixes: de322e085995 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs") Cc: [email protected] Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Liao Chang <[email protected]> Date: Tue Aug 29 07:03:18 2023 +0000 cpufreq: Fix the race condition while updating the transition_task of policy [ Upstream commit 61bfbf7951ba561dcbdd5357702d3cbc2d447812 ] The field 'transition_task' of policy structure is used to track the task which is performing the frequency transition. Using this field to print a warning once detect a case where the same task is calling _begin() again before completing the preivous frequency transition via the _end(). However, there is a potential race condition in _end() and _begin() APIs while updating the field 'transition_task' of policy, the scenario is depicted below: Task A Task B /* 1st freq transition */ Invoke _begin() { ... ... } /* 2nd freq transition */ Invoke _begin() { ... //waiting for A to ... //clear ... //transition_ongoing ... //in _end() for ... //the 1st transition | Change the frequency | | Invoke _end() { | ... | ... | transition_ongoing = false; V transition_ongoing = true; transition_task = current; transition_task = NULL; ... //A overwrites the task ... //performing the transition ... //result in error warning. } To fix this race condition, the transition_lock of policy structure is now acquired before updating policy structure in _end() API. Which ensure that only one task can update the 'transition_task' field at a time. Link: https://lore.kernel.org/all/[email protected]/ Fixes: ca654dc3a93d ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end") Signed-off-by: Liao Chang <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Doug Smythies <[email protected]> Date: Sun Aug 20 13:46:49 2023 -0700 cpufreq: intel_pstate: set stale CPU frequency to minimum commit d51847acb018d83186e4af67bc93f9a00a8644f7 upstream. The intel_pstate CPU frequency scaling driver does not use policy->cur and it is 0. When the CPU frequency is outdated arch_freq_get_on_cpu() will default to the nominal clock frequency when its call to cpufreq_quick_getpolicy_cur returns the never updated 0. Thus, the listed frequency might be outside of currently set limits. Some users are complaining about the high reported frequency, albeit stale, when their system is idle and/or it is above the reduced maximum they have set. This patch will maintain policy_cur for the intel_pstate driver at the current minimum CPU frequency. Reported-by: Yang Jie <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217597 Signed-off-by: Doug Smythies <[email protected]> [ rjw: White space damage fixes and comment adjustment ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Keyon Jie <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Liao Chang <[email protected]> Date: Sat Aug 26 09:51:13 2023 +0000 cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit() [ Upstream commit 03997da042dac73c69e60d91942c727c76828b65 ] Since the 'cpus' field of policy structure will become empty in the cpufreq core API, it is better to use 'related_cpus' in the exit() callback of driver. Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly") Signed-off-by: Liao Chang <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Herbert Xu <[email protected]> Date: Thu Aug 3 17:59:28 2023 +0800 crypto: api - Use work queue in crypto_destroy_instance [ Upstream commit 9ae4577bc077a7e32c3c7d442c95bc76865c0f17 ] The function crypto_drop_spawn expects to be called in process context. However, when an instance is unregistered while it still has active users, the last user may cause the instance to be freed in atomic context. Fix this by delaying the freeing to a work queue. Fixes: 6bfd48096ff8 ("[CRYPTO] api: Added spawns") Reported-by: Florent Revest <[email protected]> Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Herbert Xu <[email protected]> Tested-by: Florent Revest <[email protected]> Acked-by: Florent Revest <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gaurav Jain <[email protected]> Date: Tue Aug 8 12:55:25 2023 +0200 crypto: caam - fix unchecked return value error [ Upstream commit e30685204711a6be40dec2622606950ccd37dafe ] error: Unchecked return value (CHECKED_RETURN) check_return: Calling sg_miter_next without checking return value fix: added check if(!sg_miter_next) Fixes: 8a2a0dd35f2e ("crypto: caam - strip input zeros from RSA input buffer") Signed-off-by: Gaurav Jain <[email protected]> Signed-off-by: Meenakshi Aggarwal <[email protected]> Reviewed-by: Gaurav Jain <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Giovanni Cabiddu <[email protected]> Date: Thu Jun 22 10:26:35 2023 +0100 crypto: qat - change value of default idle filter [ Upstream commit 0f942bdfe9d463be3073301519492f8d53c6b2d5 ] The power management configuration of 4xxx devices is too aggressive and in some conditions the device might be prematurely put to a low power state. Increase the idle filter value to prevent that. In future, this will be set by firmware. Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4") Signed-off-by: Giovanni Cabiddu <[email protected]> Reviewed-by: Damian Muszynski <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Herbert Xu <[email protected]> Date: Tue Nov 22 13:53:38 2022 +0800 crypto: rsa-pkcs1pad - Use helper to set reqsize commit 5b11d1a360ea23c80c6d4ec3f5986a788d0a0995 upstream. The value of reqsize must only be changed through the helper. Signed-off-by: Herbert Xu <[email protected]> Cc: Giovanni Cabiddu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Thomas Bourgoin <[email protected]> Date: Thu Jul 13 17:15:15 2023 +0200 crypto: stm32 - fix loop iterating through scatterlist for DMA commit d9c83f71eeceed2cb54bb78be84f2d4055fd9a1f upstream. We were reading the length of the scatterlist sg after copying value of tsg inside. So we are using the size of the previous scatterlist and for the first one we are using an unitialised value. Fix this by copying tsg in sg[0] before reading the size. Fixes : 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module") Cc: [email protected] Signed-off-by: Thomas Bourgoin <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Uwe Kleine-König <[email protected]> Date: Mon Jul 31 18:54:54 2023 +0200 crypto: stm32 - Properly handle pm_runtime_get failing [ Upstream commit aec48805163338f8413118796c1dd035661b9140 ] If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this means the clk wasn't prepared and enabled. Returning early in this case however is wrong as then the following resource frees are skipped and this is never catched up. So do all the cleanups but clk_disable_unprepare(). Also don't emit a warning, as stm32_hash_runtime_resume() already emitted one. Note that the return value of stm32_hash_remove() is mostly ignored by the device core. The only effect of returning zero instead of an error value is to suppress another warning in platform_remove(). So return 0 even if pm_runtime_resume_and_get() failed. Fixes: 8b4d566de6a5 ("crypto: stm32/hash - Add power management support") Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Suman Ghosh <[email protected]> Date: Thu Aug 24 13:40:32 2023 +0530 cteonxt2-pf: Fix backpressure config for multiple PFC priorities to work simultaneously [ Upstream commit 597d0ec0e4ca6a912affea4cc94df08959e9ec74 ] MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress hierarchical scheduler tree depending on link level config done. If there are multiple PFC priorities enabled at a time and for all such flows to backoff, each priority will have to assert backpressure at different TL3/TL2 scheduler nodes and these flows will need to submit egress pkts to these nodes. Current PFC configuration has an issue where in only one backpressure scheduler node is being allocated which is resulting in only one PFC priority to work. This patch fixes this issue. Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support") Signed-off-by: Suman Ghosh <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jann Horn <[email protected]> Date: Fri Aug 25 15:32:41 2023 +0200 dccp: Fix out of bounds access in DCCP error handler commit 977ad86c2a1bcaf58f01ab98df5cc145083c489c upstream. There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required. Fixes: 6706a97fec96 ("dccp: fix out of bound access in dccp_v4_err()") Fixes: 1aa9d1a0e7ee ("ipv6: dccp: fix out of bound access in dccp_v6_err()") Cc: [email protected] Signed-off-by: Jann Horn <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alexander Aring <[email protected]> Date: Thu Aug 24 16:51:42 2023 -0400 dlm: fix plock lookup when using multiple lockspaces commit 7c53e847ff5e97f033fdd31f71949807633d506b upstream. All posix lock ops, for all lockspaces (gfs2 file systems) are sent to userspace (dlm_controld) through a single misc device. The dlm_controld daemon reads the ops from the misc device and sends them to other cluster nodes using separate, per-lockspace cluster api communication channels. The ops for a single lockspace are ordered at this level, so that the results are received in the same sequence that the requests were sent. When the results are sent back to the kernel via the misc device, they are again funneled through the single misc device for all lockspaces. When the dlm code in the kernel processes the results from the misc device, these results will be returned in the same sequence that the requests were sent, on a per-lockspace basis. A recent change in this request/reply matching code missed the "per-lockspace" check (fsid comparison) when matching request and reply, so replies could be incorrectly matched to requests from other lockspaces. Cc: [email protected] Reported-by: Barry Marson <[email protected]> Fixes: 57e2c2f2d94c ("fs: dlm: fix mismatch of plock results from userspace") Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David Teigland <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Rob Clark <[email protected]> Date: Mon Jul 24 07:49:41 2023 -0700 dma-buf/sync_file: Fix docs syntax [ Upstream commit 05d56d8079d510a2994039470f65bea85f0075ee ] Fixes the warning: include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info' Fixes: 2d75c88fefb2 ("staging/android: refactor SYNC IOCTLs") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rex Zhang <[email protected]> Date: Wed Jun 14 14:27:06 2023 +0800 dmaengine: idxd: Modify the dependence of attribute pasid_enabled [ Upstream commit 50c5e6f41d5ad7c731c31135a30d0e4f0e4fea26 ] Kernel PASID and user PASID are separately enabled. User needs to know the user PASID enabling status to decide how to use IDXD device in user space. This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled. It's unnecessary for user to know the kernel PASID enabling status because user won't use the kernel PASID. But instead of showing the user PASID enabling status, the attribute shows the kernel PASID enabling status. Fix the issue by showing the user PASID enabling status in the attribute. Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling") Signed-off-by: Rex Zhang <[email protected]> Acked-by: Fenghua Yu <[email protected]> Acked-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: ruanjinjie <[email protected]> Date: Mon Jul 24 14:41:08 2023 +0000 dmaengine: ste_dma40: Add missing IRQ check in d40_probe [ Upstream commit c05ce6907b3d6e148b70f0bb5eafd61dcef1ddc1 ] Check for the return value of platform_get_irq(): if no interrupt is specified, it wouldn't make sense to call request_irq(). Fixes: 8d318a50b3d7 ("DMAENGINE: Support for ST-Ericssons DMA40 block v3") Signed-off-by: Ruan Jinjie <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Randy Dunlap <[email protected]> Date: Sun Jul 9 22:23:05 2023 -0700 docs: ABI: fix spelling/grammar in SBEFIFO timeout interface [ Upstream commit 2cd9ec2a51474d4c0b4d2a061f2de7da34eff476 ] Correct spelling problems as identified by codespell. Correct one grammar error. Fixes: 9a93de620e0a ("docs: ABI: testing: Document the SBEFIFO timeout interface") Signed-off-by: Randy Dunlap <[email protected]> Cc: Eddie James <[email protected]> Cc: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason Gunthorpe <[email protected]> Date: Mon Jul 24 14:40:46 2023 -0300 driver core: Call dma_cleanup() on the test_remove path [ Upstream commit f429378a9bf84d79a7e2cae05d2e3384cf7d68ba ] When test_remove is enabled really_probe() does not properly pair dma_configure() with dma_remove(), it will end up calling dma_configure() twice. This corrupts the owner_cnt and renders the group unusable with VFIO/etc. Add the missing cleanup before going back to re_probe. Fixes: 25f3bcfc54bc ("driver core: Add dma_cleanup callback in bus_type") Reported-by: Zenghui Yu <[email protected]> Tested-by: Zenghui Yu <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Tue Jul 18 10:03:49 2023 +0300 driver core: test_async: fix an error code [ Upstream commit 22d2381bbd70a5853c2ee77522f4965139672db9 ] The test_platform_device_register_node() function should return error pointers instead of NULL. That is what the callers are expecting. Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Gow <[email protected]> Date: Thu Jul 20 14:45:09 2023 +0200 drivers: base: Free devm resources when unregistering a device [ Upstream commit 699fb50d99039a50e7494de644f96c889279aca3 ] In the current code, devres_release_all() only gets called if the device has a bus and has been probed. This leads to issues when using bus-less or driver-less devices where the device might never get freed if a managed resource holds a reference to the device. This is happening in the DRM framework for example. We should thus call devres_release_all() in the device_del() function to make sure that the device-managed actions are properly executed when the device is unregistered, even if it has neither a bus nor a driver. This is effectively the same change than commit 2f8d16a996da ("devres: release resources on device_del()") that got reverted by commit a525a3ddeaca ("driver core: free devres in device_release") over memory leaks concerns. This patch effectively combines the two commits mentioned above to release the resources both on device_del() and device_release() and get the best of both worlds. Fixes: a525a3ddeaca ("driver core: free devres in device_release") Signed-off-by: David Gow <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Minjie Du <[email protected]> Date: Wed Jul 12 18:22:46 2023 +0800 drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init() [ Upstream commit a995c50db887ef97f3160775aef7d772635a6f6e ] The function clk_register_pll() may return NULL or an ERR_PTR. Don't treat an ERR_PTR as valid. Signed-off-by: Minjie Du <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver") [[email protected]: Reword commit text] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Maciej S. Szmigiero <[email protected]> Date: Wed Aug 9 20:40:18 2023 +0200 Drivers: hv: vmbus: Don't dereference ACPI root object handle [ Upstream commit 78e04bbff849b51b56f5925b1945db2c6e128b61 ] Since the commit referenced in the Fixes: tag below the VMBus client driver is walking the ACPI namespace up from the VMBus ACPI device to the ACPI namespace root object trying to find Hyper-V MMIO ranges. However, if it is not able to find them it ends trying to walk resources of the ACPI namespace root object itself. This object has all-ones handle, which causes a NULL pointer dereference in the ACPI code (from dereferencing this pointer with an offset). This in turn causes an oops on boot with VMBus host implementations that do not provide Hyper-V MMIO ranges in their VMBus ACPI device or its ancestors. The QEMU VMBus implementation is an example of such implementation. I guess providing these ranges is optional, since all tested Windows versions seem to be able to use VMBus devices without them. Fix this by explicitly terminating the lookup at the ACPI namespace root object. Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface by default - they only do so if the KVM PV interface is missing or disabled. Example stack trace of such oops: [ 3.710827] ? __die+0x1f/0x60 [ 3.715030] ? page_fault_oops+0x159/0x460 [ 3.716008] ? exc_page_fault+0x73/0x170 [ 3.716959] ? asm_exc_page_fault+0x22/0x30 [ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0 [ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0 [ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0 [ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200 [ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0 [ 3.723559] ? down_timeout+0x3a/0x60 [ 3.724455] ? acpi_ns_get_node+0x3a/0x60 [ 3.725412] acpi_ns_get_node+0x3a/0x60 [ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0 [ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0 [ 3.728400] acpi_rs_get_method_data+0x2b/0x70 [ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus] [ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus] [ 3.732411] acpi_walk_resources+0x78/0xd0 [ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus] [ 3.734802] platform_probe+0x3d/0x90 [ 3.735684] really_probe+0x19b/0x400 [ 3.736570] ? __device_attach_driver+0x100/0x100 [ 3.737697] __driver_probe_device+0x78/0x160 [ 3.738746] driver_probe_device+0x1f/0x90 [ 3.739743] __driver_attach+0xc2/0x1b0 [ 3.740671] bus_for_each_dev+0x70/0xc0 [ 3.741601] bus_add_driver+0x10e/0x210 [ 3.742527] driver_register+0x55/0xf0 [ 3.744412] ? 0xffffffffc039a000 [ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus] Fixes: 7f163a6fd957 ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.") Signed-off-by: Maciej S. Szmigiero <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Wei Liu <[email protected]> Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com Signed-off-by: Sasha Levin <[email protected]>
Author: Dongliang Mu <[email protected]> Date: Mon Feb 27 18:24:08 2023 +0800 drivers: usb: smsusb: fix error handling code in smsusb_init_device [ Upstream commit b9c7141f384097fa4fa67d2f72e5731d628aef7c ] The previous commit 4b208f8b561f ("[media] siano: register media controller earlier")moves siano_media_device_register before smscore_register_device, and adds corresponding error handling code if smscore_register_device fails. However, it misses the following error handling code of smsusb_init_device. Fix this by moving error handling code at the end of smsusb_init_device and adding a goto statement in the following error handling parts. Fixes: 4b208f8b561f ("[media] siano: register media controller earlier") Signed-off-by: Dongliang Mu <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Fudong Wang <[email protected]> Date: Fri Aug 11 08:24:59 2023 +0800 drm/amd/display: Add smu write msg id fail retry process commit 72105dcfa3d12b5af49311f857e3490baa225135 upstream. A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: [email protected] # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Fudong Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wesley Chalmers <[email protected]> Date: Thu Nov 3 22:29:31 2022 -0400 drm/amd/display: Do not set drr on pipe commit [ Upstream commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7 ] [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. [HOW] Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets optimized_required. This change expects that Freesync requests are blocked when optimized_required is true. Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Wesley Chalmers <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hamza Mahfooz <[email protected]> Date: Fri Aug 4 11:13:04 2023 -0400 drm/amd/display: ensure async flips are only accepted for fast updates commit a7c0cad0dc060bb77e9c9d235d68441b0fc69507 upstream. We should be checking to see if async flips are supported in amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also, async flipping isn't supported if a plane's framebuffer changes memory domains during an atomic commit. So, move the check from dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if the memory domain has changed in amdgpu_dm_atomic_check(). Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733 Fixes: c1e18c44dc7f ("drm/amd/display: only accept async flips for fast updates") Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: Mario Limonciello <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Leo Chen <[email protected]> Date: Wed Jul 12 16:50:15 2023 -0400 drm/amd/display: Exit idle optimizations before attempt to access PHY [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Leo Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: George Shen <[email protected]> Date: Tue Jul 11 13:22:36 2023 -0400 drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family [ Upstream commit 25b054c3c89cb6a7106a7982f0f70e83d0797dab ] [Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hamza Mahfooz <[email protected]> Date: Tue Aug 22 12:31:09 2023 -0400 drm/amd/display: register edp_backlight_control() for DCN301 commit 1611917f39bee1abfc01501238db8ac19649042d upstream. As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yang Wang <[email protected]> Date: Tue Aug 1 16:53:23 2023 +0800 drm/amd/pm: fix variable dereferenced issue in amdgpu_device_attr_create() [ Upstream commit 25e6373a5b8efc623443f2699d2b929bf3067d76 ] - fix variable ('attr') dereferenced issue. - using condition check instead of BUG_ON(). Fixes: 4e01847c38f7 ("drm/amdgpu: optimize amdgpu device attribute code") Cc: Dan Carpenter <[email protected]> Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jane Jian <[email protected]> Date: Thu Jul 20 18:08:07 2023 +0800 drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock [ Upstream commit 4a37c55b859a69f429bfa7fab4fc43ee470b60ed ] Report current GFX clock also from average clock value as the original CurrClock data is not valid/accurate any more as per FW team Signed-off-by: Jane Jian <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Fri Jul 7 13:11:51 2023 +0200 drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar() [ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ] On 32-bit architectures comparing a resource against a value larger than U32_MAX can cause a warning: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] res->start > 0x100000000ull) ~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ As gcc does not warn about this in dead code, add an IS_ENABLED() check at the start of the function. This will always return success but not actually resize the BAR on 32-bit architectures without high memory, which is exactly what we want here, as the driver can fall back to bank switching the VRAM access. Fixes: 31b8adab3247 ("drm/amdgpu: require a root bus window above 4GB for BAR resize") Reviewed-by: Christian König <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lijo Lazar <[email protected]> Date: Tue Jul 25 19:11:54 2023 +0530 drm/amdgpu: Match against exact bootloader status [ Upstream commit d3de41ee5febe5c2d9989fe9810bce2bb54a3a8e ] On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the least significant bits for any command submission. Hence match against the exact register value, otherwise a register value of all 0xFFs also could falsely indicate that boot loader is ready. Also, from PSP v13.0.6 and newer, bits[7:0] will be used to indicate command error status. Signed-off-by: Lijo Lazar <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Srinivasan Shanmugam <[email protected]> Date: Sun Jul 23 12:29:14 2023 +0530 drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl' [ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ] Fixes the following: WARNING: min() should probably be min_t(size_t, size, sizeof(ip)) + ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip))); And other style fixes: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: Missing a blank line after declarations Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:57 2023 +0300 drm/amdgpu: Use RMW accessors for changing LNKCTL [ Upstream commit ce7d88110b9ed5f33fe79ea6d4ed049fb0e57bce ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. And in the case of upstream bridge, the driver does not even own the device it's changing the registers for. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. Suggested-by: Lukas Wunner <[email protected]> Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts") Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Mon Jul 17 15:25:40 2023 +0200 drm/armada: Fix off-by-one error in armada_overlay_get_property() [ Upstream commit 5f0d984053f74983a287100a9519b2fabb785fb5 ] As ffs() returns one more than the index of the first bit set (zero means no bits set), the color key mode value is shifted one position too much. Fix this by using FIELD_GET() instead. Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <[email protected]>
Author: Chen-Yu Tsai <[email protected]> Date: Mon Jul 10 17:09:27 2023 +0800 drm/bridge: anx7625: Use common macros for DP power sequencing commands [ Upstream commit 2ba776f903cb7157e80b5f314fb0b4faf6ea6958 ] The DRM DP code has macros for the DP power sequencing commands. Use them in the anx7625 driver instead of raw numbers. Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream") Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status") Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: NÃcolas F. R. A. Prado <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Chen-Yu Tsai <[email protected]> Date: Mon Jul 10 17:12:01 2023 +0800 drm/bridge: anx7625: Use common macros for HDCP capabilities [ Upstream commit 41639b3a8b0f1f194dfe0577d99db70613f78626 ] The DRM DP code has macros for the DP HDCP capabilities. Use them in the anx7625 driver instead of raw numbers. Fixes: cd1637c7e480 ("drm/bridge: anx7625: add HDCP support") Suggested-by: NÃcolas F. R. A. Prado <[email protected]> Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Thu Jun 15 17:28:17 2023 +0200 drm/bridge: tc358764: Fix debug print parameter order [ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ] The debug print parameters were swapped in the output and they were printed as decimal values, both the hardware address and the value. Update the debug print to print the parameters in correct order, and use hexadecimal print for both address and value. Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Lucas Stach <[email protected]> Date: Fri Apr 14 16:38:10 2023 +0200 drm/etnaviv: fix dumping of active MMU context [ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ] gpu->mmu_context is the MMU context of the last job in the HW queue, which isn't necessarily the same as the context from the bad job. Dump the MMU context from the scheduler determined bad submit to make it work as intended. Fixes: 17e4660ae3d7 ("drm/etnaviv: implement per-process address spaces on MMUv2") Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Christian Gmeiner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sui Jingfeng <[email protected]> Date: Sun Jul 9 18:05:14 2023 +0800 drm/hyperv: Fix a compilation issue because of not including screen_info.h [ Upstream commit 8d1077cf2e43b15fefd76ebec2b71541eb27ef2c ] Fixes the following build errors on arm64: drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem': >> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function) 1033 | base = screen_info.lfb_base; | ^~~~~~~~~~~ drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in >> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function) 75 | drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base, | ^~~~~~~~~~~ drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: 81d2393485f0 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures") Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header") Signed-off-by: Sui Jingfeng <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: AngeloGioacchino Del Regno <[email protected]> Date: Tue Jul 25 09:32:24 2023 +0200 drm/mediatek: dp: Add missing error checks in mtk_dp_parse_capabilities [ Upstream commit cfc146137a9f12e883ba64bc496b6da4d23f26d5 ] If reading the RX capabilities fails the training pattern will be set wrongly: add error checking for drm_dp_read_dpcd_caps() and return if anything went wrong with it. While at it, also add a less critical error check when writing to clear the ESI0 IRQ vector. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Chen-Yu Tsai <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Reviewed-by: CK Hu <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sui Jingfeng <[email protected]> Date: Thu Jul 6 21:40:00 2023 +0800 drm/mediatek: Fix potential memory leak if vmap() fail [ Upstream commit 379091e0f6d179d1a084c65de90fa44583b14a70 ] Also return -ENOMEM if such a failure happens, the implement should take responsibility for the error handling. Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function") Reviewed-by: Matthias Brugger <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Signed-off-by: Sui Jingfeng <[email protected]> Reviewed-by: CK Hu <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason-JH.Lin <[email protected]> Date: Fri Jul 14 17:49:05 2023 +0800 drm/mediatek: Remove freeing not dynamic allocated memory [ Upstream commit 27b9e2ea3f2757da26bb8280e46f7fdbb1acb219 ] Fixing the coverity issue of: mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle So remove the free function. Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc") Signed-off-by: Jason-JH.Lin <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: CK Hu <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Chun-Kuang Hu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Fabio Estevam <[email protected]> Date: Tue Jun 20 20:23:19 2023 -0300 drm/msm/a2xx: Call adreno_gpu_init() earlier [ Upstream commit db07ce5da8b26bfeaf437a676ae49bd3bb1eace6 ] The adreno_is_a20x() and adreno_is_a225() functions rely on the GPU revision, but such information is retrieved inside adreno_gpu_init(), which is called afterwards. Fix this problem by caling adreno_gpu_init() earlier, so that the GPU information revision is available when adreno_is_a20x() and adreno_is_a225() run. Tested on a imx53-qsb board. Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/543456/ Signed-off-by: Rob Clark <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Baryshkov <[email protected]> Date: Wed Aug 2 13:04:19 2023 +0300 drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done [ Upstream commit d93cf453f51da168f4410ba73656f1e862096973 ] Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to dpu_encoder_helper_wait_for_irq()") the dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather than the IRQ index in phys_enc->intr table, however writeback got the older invocation in place. This was unnoticed for several releases, but now it's time to fix it. Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/550924/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel Vetter <[email protected]> Date: Thu Aug 3 22:45:21 2023 +0200 drm/msm/mdp5: Don't leak some plane state [ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ] Apparently no one noticed that mdp5 plane states leak like a sieve ever since we introduced plane_state->commit refcount a few years ago in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Fix it by using the right helpers. Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Cc: Maarten Lankhorst <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Rob Clark <[email protected]> Cc: Abhinav Kumar <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: [email protected] Cc: [email protected] Reported-and-tested-by: [email protected] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Reviewed-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/551236/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryan McCann <[email protected]> Date: Fri Jul 7 18:24:40 2023 -0700 drm/msm: Update dev core dump to not print backwards [ Upstream commit 903705111d863ed8ccf73465da77d232fc422ec1 ] Device core dump add block method adds hardware blocks to dumping queue with stack behavior which causes the hardware blocks to be printed in reverse order. Change the addition to dumping queue data structure from "list_add" to "list_add_tail" for FIFO queue behavior. Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Signed-off-by: Ryan McCann <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/546200/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Sun Jul 9 15:49:14 2023 +0200 drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01 [ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ] The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:58 2023 +0300 drm/radeon: Use RMW accessors for changing LNKCTL [ Upstream commit 7189576e8a829130192b33c5b64e8a475369c776 ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. And in the case of upstream bridge, the driver does not even own the device it's changing the registers for. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. Suggested-by: Lukas Wunner <[email protected]> Fixes: 8a7cd27679d0 ("drm/radeon/cik: add support for pcie gen1/2/3 switching") Fixes: b9d305dfb66c ("drm/radeon: implement pcie gen2/3 support for SI") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Thu Mar 17 09:18:30 2022 +0100 drm/repaper: Reduce temporary buffer size in repaper_fb_dirty() [ Upstream commit fedf429e071f6dbbe7a69dfc342492e037692018 ] As the temporary buffer is no longer used to store 8-bit grayscale data, its size can be reduced to the size needed to store the monochrome bitmap data. Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Yangtao Li <[email protected]> Date: Mon Jul 10 11:23:49 2023 +0800 drm/tegra: dpaux: Fix incorrect return value of platform_get_irq [ Upstream commit 2a1ca44b654346cadfc538c4fb32eecd8daf3140 ] When platform_get_irq fails, we should return dpaux->irq instead of -ENXIO. Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support") Signed-off-by: Yangtao Li <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Bogdan Togorean <[email protected]> Date: Wed Jul 19 09:01:43 2023 +0300 drm: adv7511: Fix low refresh rate register for ADV7533/5 [ Upstream commit d281eeaa4de2636ff0c8e6ae387bb07b50e5fcbb ] For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register. So depending on ADV model write 0xfb or 0x4a register. Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533") Reviewed-by: Robert Foss <[email protected]> Reviewed-by: Nuno Sa <[email protected]> Signed-off-by: Bogdan Togorean <[email protected]> Signed-off-by: Alexandru Ardelean <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Jiasheng Jiang <[email protected]> Date: Wed Jun 7 10:05:29 2023 +0800 drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask [ Upstream commit 1832fba7f9780aff67c96ad30f397c2d76141833 ] Add check for dma_set_mask() and return the error if it fails. Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem") Signed-off-by: Jiasheng Jiang <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jun 26 19:48:07 2023 +0200 dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs [ Upstream commit 9eba4db02a88e7a810aabd70f7a6960f184f391f ] There are 10 more GDSCs that we've not been caring about, and by extension (and perhaps even more importantly), not putting to sleep. Add them. Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings") Acked-by: Rob Herring <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Krzysztof Kozlowski <[email protected]> Date: Thu Jul 20 10:01:40 2023 +0200 dt-bindings: extcon: maxim,max77843: restrict connector properties [ Upstream commit fb2c3f72e819254d8c76de95917e5f9ff232586c ] Do not allow any other properties in connector child, except what usb-connector.yaml evaluates. Fixes: 9729cad0278b ("dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Qiuxu Zhuo <[email protected]> Date: Tue Jul 25 16:04:27 2023 +0800 EDAC/igen6: Fix the issue of no error events [ Upstream commit ce53ad81ed36c24aff075f94474adecfabfcf239 ] Current igen6_edac checks for pending errors before the registration of the error handler. However, there is a possibility that the error occurs during the registration process, leading to unhandled pending errors and no future error events. This issue can be reproduced by repeatedly injecting errors during the loading of the igen6_edac. Fix this issue by moving the pending error handler after the registration of the error handler, ensuring that no pending errors are left unhandled. Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Reported-by: Ee Wey Lim <[email protected]> Tested-by: Ee Wey Lim <[email protected]> Signed-off-by: Qiuxu Zhuo <[email protected]> Signed-off-by: Tony Luck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Yuanjun Gong <[email protected]> Date: Thu Jul 20 22:42:08 2023 +0800 ethernet: atheros: fix return value check in atl1c_tso_csum() [ Upstream commit 8d01da0a1db237c44c92859ce3612df7af8d3a53 ] in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wen Yang <[email protected]> Date: Sun Jul 9 14:54:51 2023 +0800 eventfd: prevent underflow for eventfd semaphores [ Upstream commit 758b492047816a3158d027e9fca660bc5bcf20bf ] For eventfd with flag EFD_SEMAPHORE, when its ctx->count is 0, calling eventfd_ctx_do_read will cause ctx->count to overflow to ULLONG_MAX. An underflow can happen with EFD_SEMAPHORE eventfds in at least the following three subsystems: (1) virt/kvm/eventfd.c (2) drivers/vfio/virqfd.c (3) drivers/virt/acrn/irqfd.c where (2) and (3) are just modeled after (1). An eventfd must be specified for use with the KVM_IRQFD ioctl(). This can also be an EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been decremented to zero an underflow can be triggered when the irqfd is shut down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD ioctl(): // ctx->count == 0 kvm_vm_ioctl() -> kvm_irqfd() -> kvm_irqfd_deassign() -> irqfd_deactivate() -> irqfd_shutdown() -> eventfd_ctx_remove_wait_queue(&cnt) -> eventfd_ctx_do_read(&cnt) Userspace polling on the eventfd wouldn't notice the underflow because 1 is always returned as the value from eventfd_read() while ctx->count would've underflowed. It's not a huge deal because this should only be happening when the irqfd is shutdown but we should still fix it and avoid the spurious wakeup. Fixes: cb289d6244a3 ("eventfd - allow atomic read and waitqueue remove") Signed-off-by: Wen Yang <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Dylan Yudaken <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: [email protected] Cc: [email protected] Message-Id: <[email protected]> [brauner: rewrite commit message and add explanation how this underflow can happen] Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Tue Aug 1 22:31:56 2023 +0800 ext4: avoid potential data overflow in next_linear_group [ Upstream commit 60c672b7f2d1e5dd1774f2399b355c9314e709f8 ] ngroups is ext4_group_t (unsigned int) while next_linear_group treat it in int. If ngroups is bigger than max number described by int, it will be treat as a negative number. Then "return group + 1 >= ngroups ? 0 : group + 1;" may keep returning 0. Switch int to ext4_group_t in next_linear_group to fix the overflow. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Tue Aug 1 22:31:55 2023 +0800 ext4: correct grp validation in ext4_mb_good_group [ Upstream commit a9ce5993a0f5c0887c8a1b4ffa3b8046fbcfdc93 ] Group corruption check will access memory of grp and will trigger kernel crash if grp is NULL. So do NULL check before corruption check. Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail") Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhihao Cheng <[email protected]> Date: Wed Jun 28 21:20:11 2023 +0800 ext4: fix unttached inode after power cut with orphan file feature enabled [ Upstream commit 1524773425ae8113b0b782886366e68656b34e53 ] Running generic/475(filesystem consistent tests after power cut) could easily trigger unattached inode error while doing fsck: Unattached zero-length inode 39405. Clear? no Unattached inode 39405 Connect to /lost+found? no Above inconsistence is caused by following process: P1 P2 ext4_create inode = ext4_new_inode_start_handle // itable records nlink=1 ext4_add_nondir err = ext4_add_entry // ENOSPC ext4_append ext4_bread ext4_getblk ext4_map_blocks // returns ENOSPC drop_nlink(inode) // won't be updated into disk inode ext4_orphan_add(handle, inode) ext4_orphan_file_add ext4_journal_stop(handle) jbd2_journal_commit_transaction // commit success >> power cut << ext4_fill_super ext4_load_and_init_journal // itable records nlink=1 ext4_orphan_cleanup ext4_process_orphan if (inode->i_nlink) // true, inode won't be deleted Then, allocated inode will be reserved on disk and corresponds to no dentries, so e2fsck reports 'unattached inode' problem. The problem won't happen if orphan file feature is disabled, because ext4_orphan_add() will update disk inode in orphan list mode. There are several places not updating disk inode while putting inode into orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout in ext4_rename(). Fix it by updating inode into disk in all error branches of these places. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605 Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling") Signed-off-by: Zhihao Cheng <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Fri Aug 4 15:28:49 2023 +0200 extcon: cht_wc: add POWER_SUPPLY dependency [ Upstream commit d20a3a8a32e3fa564ff25da860c5fc1a97642dfe ] The driver fails to link when CONFIG_POWER_SUPPLY is disabled: x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop': extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event': extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe': extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register' It should be possible to change the driver to not require this at compile time and still provide other functions, but adding a hard Kconfig dependency does not seem to have any practical downsides and is simpler since the option is normally enabled anyway. Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chao Yu <[email protected]> Date: Thu Jul 6 10:06:14 2023 +0800 f2fs: fix to avoid mmap vs set_compress_option case [ Upstream commit b5ab3276eb69cacf44ecfb11b2bfab73096ff4e4 ] Compression option in inode should not be changed after they have been used, however, it may happen in below race case: Thread A Thread B - f2fs_ioc_set_compress_option - check f2fs_is_mmap_file() - check get_dirty_pages() - check F2FS_HAS_BLOCKS() - f2fs_file_mmap - set_inode_flag(FI_MMAP_FILE) - fault - do_page_mkwrite - f2fs_vm_page_mkwrite - f2fs_get_block_locked - fault_dirty_shared_page - set_page_dirty - update i_compress_algorithm - update i_log_cluster_size - update i_cluster_size Avoid such race condition by covering f2fs_file_mmap() w/ i_sem lock, meanwhile add mmap file check condition in f2fs_may_compress() as well. Fixes: e1e8debec656 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl") Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yangtao Li <[email protected]> Date: Tue Nov 29 20:29:28 2022 +0800 f2fs: judge whether discard_unit is section only when have CONFIG_BLK_DEV_ZONED [ Upstream commit b5a711acab305e04278c136c841ba37c589c16a1 ] The current logic, regardless of whether CONFIG_BLK_DEV_ZONED is enabled or not, will judge whether discard_unit is SECTION, when f2fs_sb_has_blkzoned. In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment is a path that will never be accessed. At this time, -EINVAL will be returned in the parse_options function, accompanied by the message "Zoned block device support is not enabled". Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED. Signed-off-by: Yangtao Li <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Stable-dep-of: 2bd4df8fcbc7 ("f2fs: Only lfs mode is allowed with zoned block device feature") Signed-off-by: Sasha Levin <[email protected]>
Author: Chunhai Guo <[email protected]> Date: Thu Aug 3 22:28:42 2023 +0800 f2fs: Only lfs mode is allowed with zoned block device feature [ Upstream commit 2bd4df8fcbc72f58ce3c62ed021ab291ca42de0b ] Now f2fs support four block allocation modes: lfs, adaptive, fragment:segment, fragment:block. Only lfs mode is allowed with zoned block device feature. Fixes: 6691d940b0e0 ("f2fs: introduce fragment allocation mode mount option") Signed-off-by: Chunhai Guo <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vlad Karpovich <[email protected]> Date: Tue Aug 15 12:29:08 2023 -0500 firmware: cs_dsp: Fix new control name check [ Upstream commit 7ac1102b227b36550452b663fd39ab1c09378a95 ] Before adding a new FW control, its name is checked against existing controls list. But the string length in strncmp used to compare controls names is taken from the list, so if beginnings of the controls are matching, then the new control is not created. For example, if CAL_R control already exists, CAL_R_SELECTED is not created. The fix is to compare string lengths as well. Fixes: 6477960755fb ("ASoC: wm_adsp: Move check for control existence") Signed-off-by: Vlad Karpovich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Shurong <[email protected]> Date: Sat Jul 15 22:13:38 2023 +0800 firmware: meson_sm: fix to avoid potential NULL pointer dereference [ Upstream commit f2ed165619c16577c02b703a114a1f6b52026df4 ] of_match_device() may fail and returns a NULL pointer. Fix this by checking the return value of of_match_device. Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver") Signed-off-by: Zhang Shurong <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nishanth Menon <[email protected]> Date: Tue Jun 20 08:03:29 2023 -0500 firmware: ti_sci: Use system_state to determine polling [ Upstream commit 9225bcdedf16297a346082e7d23b0e8434aa98ed ] Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") aims to resolve issues with tisci operations during system suspend operation. However, the system may enter a no_irq stage in various other usage modes, including power-off and restart. To determine if polling mode is appropriate, use the system_state instead. While at this, drop the unused is_suspending state variable and related helpers. Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") Reported-by: Francesco Dolcini <[email protected]> Reported-by: Wadim Egorov <[email protected]> Tested-by: Francesco Dolcini <[email protected]> # Toradex Verdin AM62 Link: https://lore.kernel.org/r/[email protected] Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Winston Wen <[email protected]> Date: Mon Jul 24 10:10:56 2023 +0800 fs/nls: make load_nls() take a const parameter [ Upstream commit c1ed39ec116272935528ca9b348b8ee79b0791da ] load_nls() take a char * parameter, use it to find nls module in list or construct the module name to load it. This change make load_nls() take a const parameter, so we don't need do some cast like this: ses->local_nls = load_nls((char *)ctx->local_nls->charset); Suggested-by: Stephen Rothwell <[email protected]> Signed-off-by: Winston Wen <[email protected]> Reviewed-by: Paulo Alcantara <[email protected]> Reviewed-by: Christian Brauner <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wang Ming <[email protected]> Date: Thu Jul 13 20:05:42 2023 +0800 fs: Fix error checking for d_hash_and_lookup() [ Upstream commit 0d5a4f8f775ff990142cdc810a84eae078589d27 ] The d_hash_and_lookup() function returns error pointers or NULL. Most incorrect error checks were fixed, but the one in int path_pts() was forgotten. Fixes: eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") Signed-off-by: Wang Ming <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Su Hui <[email protected]> Date: Fri Aug 4 09:26:57 2023 +0800 fs: lockd: avoid possible wrong NULL parameter [ Upstream commit de8d38cf44bac43e83bad28357ba84784c412752 ] clang's static analysis warning: fs/lockd/mon.c: line 293, column 2: Null pointer passed as 2nd argument to memory copy function. Assuming 'hostname' is NULL and calling 'nsm_create_handle()', this will pass NULL as 2nd argument to memory copy function 'memcpy()'. So return NULL if 'hostname' is invalid. Fixes: 77a3ef33e2de ("NSM: More clean up of nsm_get_handle()") Signed-off-by: Su Hui <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Artem Chernyshev <[email protected]> Date: Thu Aug 3 17:54:17 2023 +0300 fs: ocfs2: namei: check return value of ocfs2_add_entry() [ Upstream commit 6b72e5f9e79360fce4f2be7fe81159fbdf4256a5 ] Process result of ocfs2_add_entry() in case we have an error value. Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://lkml.kernel.org/r/[email protected] Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Artem Chernyshev <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Artem Chernyshev <[email protected]> Cc: Joel Becker <[email protected]> Cc: Kurt Hackel <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eddie James <[email protected]> Date: Mon Jun 12 14:56:50 2023 -0500 fsi: aspeed: Reset master errors after CFAM reset [ Upstream commit 52300909f4670ac552bfeb33c1355b896eac8c06 ] It has been observed that sometimes the FSI master will return all 0xffs after a CFAM has been taken out of reset, without presenting any error. Resetting the FSI master errors resolves the issue. Fixes: 4a851d714ead ("fsi: aspeed: Support CFAM reset GPIO") Signed-off-by: Eddie James <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Biggers <[email protected]> Date: Tue Aug 1 21:03:53 2023 -0700 fsverity: skip PKCS#7 parser when keyring is empty commit 919dc320956ea353a7fb2d84265195ad5ef525ac upstream. If an fsverity builtin signature is given for a file but the ".fs-verity" keyring is empty, there's no real reason to run the PKCS#7 parser. Skip this to avoid the PKCS#7 attack surface when builtin signature support is configured into the kernel but is not being used. This is a hardening improvement, not a fix per se, but I've added Fixes and Cc stable to get it out to more users. Fixes: 432434c9f8e1 ("fs-verity: support builtin file signatures") Cc: [email protected] Reviewed-by: Jarkko Sakkinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Illia Ostapyshyn <[email protected]> Date: Tue Jun 13 17:26:00 2023 +0200 HID: input: Support devices sending Eraser without Invert [ Upstream commit 276e14e6c3993317257e1787e93b7166fbc30905 ] Some digitizers (notably XP-Pen Artist 24) do not report the Invert usage when erasing. This causes the device to be permanently stuck with the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only usage that can release the tool. In this state, Touch and Inrange are no longer reported to userspace, rendering the pen unusable. Prior to commit 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were simply translated into BTN_TOUCH without causing an inconsistent state. Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during hidinput_configure_usage(). This quirk causes the tool to be released as soon as Eraser is reported as not set. Set BTN_TOOL_RUBBER in input->keybit when mapping Eraser. Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT") Co-developed-by: Nils Fuhler <[email protected]> Signed-off-by: Nils Fuhler <[email protected]> Signed-off-by: Illia Ostapyshyn <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nikita Zhandarovich <[email protected]> Date: Tue Jun 13 03:16:35 2023 -0700 HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode() [ Upstream commit 6f20d3261265885f6a6be4cda49d7019728760e0 ] Presently, if a call to logi_dj_recv_send_report() fails, we do not learn about the error until after sending short HID_OUTPUT_REPORT with hid_hw_raw_request(). To handle this somewhat unlikely issue, return on error in logi_dj_recv_send_report() (minding ugly sleep workaround) and take into account the result of hid_hw_raw_request(). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 6a9ddc897883 ("HID: logitech-dj: enable notifications on connect/disconnect") Signed-off-by: Nikita Zhandarovich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rahul Rameshbabu <[email protected]> Date: Thu Aug 24 06:14:33 2023 +0000 HID: multitouch: Correct devm device reference for hidinput input_dev name [ Upstream commit 4794394635293a3e74591351fff469cea7ad15a2 ] Reference the HID device rather than the input device for the devm allocation of the input_dev name. Referencing the input_dev would lead to a use-after-free when the input_dev was unregistered and subsequently fires a uevent that depends on the name. At the point of firing the uevent, the name would be freed by devres management. Use devm_kasprintf to simplify the logic for allocating memory and formatting the input_dev name string. Reported-by: Maxime Ripard <[email protected]> Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae Fixes: c08d46aa805b ("HID: multitouch: devm conversion") Suggested-by: Maxime Ripard <[email protected]> Suggested-by: Dmitry Torokhov <[email protected]> Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rahul Rameshbabu <[email protected]> Date: Thu Aug 24 06:14:17 2023 +0000 HID: uclogic: Correct devm device reference for hidinput input_dev name [ Upstream commit dd613a4e45f8d35f49a63a2064e5308fa5619e29 ] Reference the HID device rather than the input device for the devm allocation of the input_dev name. Referencing the input_dev would lead to a use-after-free when the input_dev was unregistered and subsequently fires a uevent that depends on the name. At the point of firing the uevent, the name would be freed by devres management. Use devm_kasprintf to simplify the logic for allocating memory and formatting the input_dev name string. Reported-by: [email protected] Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/ Reported-by: Maxime Ripard <[email protected]> Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae Fixes: cce2dbdf258e ("HID: uclogic: name the input nodes based on their tool") Suggested-by: Maxime Ripard <[email protected]> Suggested-by: Dmitry Torokhov <[email protected]> Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Biju Das <[email protected]> Date: Thu Aug 24 21:44:54 2023 +0100 hwmon: (tmp513) Fix the channel number in tmp51x_is_visible() [ Upstream commit d103337e38e7e64c3d915029e947b1cb0b512737 ] The supported channels for this driver are {0..3}. Fix the incorrect channel in tmp51x_is_visible(). Reported-by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.") Signed-off-by: Biju Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Florian Fainelli <[email protected]> Date: Thu Aug 10 12:22:08 2023 -0700 hwrng: iproc-rng200 - Implement suspend and resume calls [ Upstream commit 8e03dd62e5be811efbf0cbeba47e79e793519105 ] Chips such as BCM7278 support system wide suspend/resume which will cause the HWRNG block to lose its state and reset to its power on reset register values. We need to cleanup and re-initialize the HWRNG for it to be functional coming out of a system suspend cycle. Fixes: c3577f6100ca ("hwrng: iproc-rng200 - Add support for BCM7278") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Martin Kaiser <[email protected]> Date: Sun Jul 2 19:35:02 2023 +0200 hwrng: nomadik - keep clock enabled while hwrng is registered [ Upstream commit 039980de89dc9dd757418d6f296e4126cc3f86c3 ] The nomadik driver uses devres to register itself with the hwrng core, the driver will be unregistered from hwrng when its device goes out of scope. This happens after the driver's remove function is called. However, nomadik's clock is disabled in the remove function. There's a short timeframe where nomadik is still registered with the hwrng core although its clock is disabled. I suppose the clock must be active to access the hardware and serve requests from the hwrng core. Switch to devm_clk_get_enabled and let devres disable the clock and unregister the hwrng. This avoids the race condition. Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Martin Kaiser <[email protected]> Date: Tue Jul 4 19:32:01 2023 +0200 hwrng: pic32 - use devm_clk_get_enabled [ Upstream commit 6755ad74aac0fb1c79b14724feb81b2f6ff25847 ] Use devm_clk_get_enabled in the pic32 driver. Ensure that the clock is enabled as long as the driver is registered with the hwrng core. Fixes: 7ea39973d1e5 ("hwrng: pic32 - Use device-managed registration API") Signed-off-by: Martin Kaiser <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Frank Li <[email protected]> Date: Thu Aug 31 10:13:24 2023 -0400 i3c: master: svc: fix probe failure when no i3c device exist commit 6e13d6528be2f7e801af63c8153b87293f25d736 upstream. I3C masters are expected to support hot-join. This means at initialization time we might not yet discover any device and this should not be treated as a fatal error. During the DAA procedure which happens at probe time, if no device has joined, all CCC will be NACKed (from a bus perspective). This leads to an early return with an error code which fails the probe of the master. Let's avoid this by just telling the core through an I3C_ERROR_M2 return command code that no device was discovered, which is a valid situation. This way the master will no longer bail out and fail to probe for a wrong reason. Cc: [email protected] Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Frank Li <[email protected]> Acked-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xiang Yang <[email protected]> Date: Fri Aug 4 10:25:25 2023 +0800 IB/uverbs: Fix an potential error pointer dereference [ Upstream commit 26b7d1a27167e7adf75b150755e05d2bc123ce55 ] smatch reports the warning below: drivers/infiniband/core/uverbs_std_types_counters.c:110 ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr' dereferencing possible ERR_PTR() The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking the value of uattr before using it. Fixes: ebb6796bd397 ("IB/uverbs: Add read counters support") Signed-off-by: Xiang Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jacob Keller <[email protected]> Date: Wed Aug 23 08:18:14 2023 -0700 ice: avoid executing commands on other ports when driving sync [ Upstream commit 0aacec49c29e7c5b1487e859b0c0a42388c34092 ] The ice hardware has a synchronization mechanism used to drive the simultaneous application of commands on both PHY ports and the source timer in the MAC. When issuing a sync via ice_ptp_exec_tmr_cmd(), the hardware will simultaneously apply the commands programmed for the main timer and each PHY port. Neither the main timer command register, nor the PHY port command registers auto clear on command execution. During the execution of a timer command intended for a single port on E822 devices, such as those used to configure a PHY during link up, the driver is not correctly clearing the previous commands. This results in unintentionally executing the last programmed command on the main timer and other PHY ports whenever performing reconfiguration on E822 ports after link up. This results in unintended side effects on other timers, depending on what command was previously programmed. To fix this, the driver must ensure that the main timer and all other PHY ports are properly initialized to perform no action. The enumeration for timer commands does not include an enumeration value for doing nothing. Introduce ICE_PTP_NOP for this purpose. When writing a timer command to hardware, leave the command bits set to zero which indicates that no operation should be performed on that port. Modify ice_ptp_one_port_cmd() to always initialize all ports. For all ports other than the one being configured, write their timer command register to ICE_PTP_NOP. This ensures that no side effect happens on the timer command. To fix this for the PHY ports, modify ice_ptp_one_port_cmd() to always initialize all other ports to ICE_PTP_NOP. This ensures that no side effects happen on the other ports. Call ice_ptp_src_cmd() with a command value if ICE_PTP_NOP in ice_sync_phy_timer_e822() and ice_start_phy_timer_e822(). With both of these changes, the driver should no longer execute a stale command on the main timer or another PHY port when reconfiguring one of the PHY ports after link up. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Siddaraju DH <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Tested-by: Sunitha Mekala <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Przemek Kitszel <[email protected]> Date: Tue Aug 8 17:54:15 2023 -0400 ice: ice_aq_check_events: fix off-by-one check when filling buffer [ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ] Allow task's event buffer to be filled also in the case that it's size is exactly the size of the message. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Przemek Kitszel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Baoquan He <[email protected]> Date: Fri Jul 7 21:58:45 2023 +0800 idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM [ Upstream commit b1e213a9e31c20206f111ec664afcf31cbfe0dbb ] On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset. -------- ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined! ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined! -------- Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Baoquan He <[email protected]> Cc: Vinod Koul <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Radoslaw Tyl <[email protected]> Date: Thu Aug 24 13:46:19 2023 -0700 igb: set max size RX buffer when store bad packet is enabled commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream. Increase the RX buffer size to 3K when the SBP bit is on. The size of the RX buffer determines the number of pages allocated which may not be sufficient for receive frames larger than the set MTU size. Cc: [email protected] Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.") Reported-by: Manfred Rudigier <[email protected]> Signed-off-by: Radoslaw Tyl <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Sep 5 04:23:38 2023 +0000 igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU commit c3b704d4a4a265660e665df51b129e8425216ed1 upstream. This is a follow up of commit 915d975b2ffa ("net: deal with integer overflows in kmalloc_reserve()") based on David Laight feedback. Back in 2010, I failed to realize malicious users could set dev->mtu to arbitrary values. This mtu has been since limited to 0x7fffffff but regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack() to allocate more than IP_MAX_MTU and risk various skb fields overflows. Fixes: 57e1ab6eaddc ("igmp: refine skb allocations") Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Eric Dumazet <[email protected]> Reported-by: David Laight <[email protected]> Cc: Kyle Zeng <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Biju Das <[email protected]> Date: Tue Jul 25 18:16:23 2023 +0100 iio: accel: adxl313: Fix adxl313_i2c_id[] table [ Upstream commit f636554c4cd1c644109cc525900a056495b86cc9 ] The .driver_data in adxl313_i2c_id[] for adxl312 and adxl314 is wrong. Fix this issue by adding corresponding adxl31x_chip_info data. Reported-by: Jonathan Cameron <[email protected]> Closes: https://lore.kernel.org/all/20230722172832.04ad7738@jic23-huawei Fixes: a7a1c60bc4c9 ("drivers: iio: accel: adxl312 and adxl314 support") Signed-off-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nayna Jain <[email protected]> Date: Tue Jul 11 12:44:47 2023 -0400 ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig [ Upstream commit 5087fd9e80e539d2163accd045b73da64de7de95 ] Time to remove "IMA_TRUSTED_KEYRING". Fixes: f4dc37785e9b ("integrity: define '.evm' as a builtin 'trusted' keyring") # v4.5+ Signed-off-by: Nayna Jain <[email protected]> Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Werner Sembach <[email protected]> Date: Wed Jul 12 11:56:51 2023 -0700 Input: i8042 - add quirk for TUXEDO Gemini 17 Gen1/Clevo PD70PN commit eb09074bdb05ffd6bfe77f8b4a41b76ef78c997b upstream. The touchpad of this device is both connected via PS/2 and i2c. This causes strange behavior when both driver fight for control. The easy fix is to prevent the PS/2 driver from accessing the mouse port as the full feature set of the touchpad is only supported in the i2c interface anyway. The strange behavior in this case is, that when an external screen is connected and the notebook is closed, the pointer on the external screen is moving to the lower right corner. When the notebook is opened again, this movement stops, but the touchpad clicks are unresponsive afterwards until reboot. Signed-off-by: Werner Sembach <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Sat Aug 12 01:16:15 2023 +0200 interconnect: qcom: bcm-voter: Improve enable_mask handling [ Upstream commit a1f4170dec440f023601d57e49227b784074d218 ] We don't need all the complex arithmetic for BCMs utilizing enable_mask, as all we need to do is to determine whether there's any user (or keepalive) asking for it to be on. Separate the logic for such BCMs for a small speed boost. Suggested-by: Bjorn Andersson <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Stable-dep-of: 1a70ca71547b ("interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Sat Aug 12 01:16:16 2023 +0200 interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting [ Upstream commit 1a70ca71547be051769f0628aa09717694f508f0 ] BCMs with an enable_mask expect to only have that specific value written to them. The current implementation only works by miracle for BCMs with enable mask == BIT(0), as the minimal vote we've been using so far just so happens to be equal to that. Use the correct value with keepalive voting. Fixes: d8630f050d3f ("interconnect: qcom: Add support for mask-based BCMs") Reported-by: Bjorn Andersson <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Mon Jul 24 12:49:22 2023 +0200 interconnect: qcom: qcm2290: Enable sync state [ Upstream commit 4e048e9b7a160f7112069c0ec2947be15f3e8154 ] Enable the generic .sync_state callback to ensure there are no outstanding votes that would waste power. Generally one would need a bunch of interface clocks to access the QoS registers when trying to go over all possible nodes during sync_state, but QCM2290 surprisingly does not seem to require any such handling. Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support") Signed-off-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Fri Aug 11 19:34:57 2023 +0200 interconnect: qcom: sm8450: Enable sync_state [ Upstream commit 16862f1b2110eca6330e5be6d804e1a08e06a202 ] Enable sync_state on sm8450 so that the interconnect votes actually mean anything and aren't just pinned to INT_MAX. Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pavel Begunkov <[email protected]> Date: Wed Aug 9 16:20:21 2023 +0100 io_uring: break iopolling on signal commit dc314886cb3d0e4ab2858003e8de2917f8a3ccbd upstream. Don't keep spinning iopoll with a signal set. It'll eventually return back, e.g. by virtue of need_resched(), but it's not a nice user experience. Cc: [email protected] Fixes: def596e9557c9 ("io_uring: support for IO polling") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/eeba551e82cad12af30c3220125eb6cb244cc94c.1691594339.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Pavel Begunkov <[email protected]> Date: Wed Aug 9 13:21:41 2023 +0100 io_uring: fix drain stalls by invalid SQE [ Upstream commit cfdbaa3a291d6fd2cb4a1a70d74e63b4abc2f5ec ] cq_extra is protected by ->completion_lock, which io_get_sqe() misses. The bug is harmless as it doesn't happen in real life, requires invalid SQ index array and racing with submission, and only messes up the userspace, i.e. stall requests execution but will be cleaned up on ring destruction. Fixes: 15641e427070f ("io_uring: don't cache number of dropped SQEs") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/66096d54651b1a60534bb2023f2947f09f50ef73.1691538547.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Matthew Wilcox (Oracle) <[email protected]> Date: Fri Jun 2 18:09:11 2023 -0400 iomap: Remove large folio handling in iomap_invalidate_folio() [ Upstream commit a221ab717c43147f728d93513923ba3528f861bf ] We do not need to release the iomap_page in iomap_invalidate_folio() to allow the folio to be split. The splitting code will call ->release_folio() if there is still per-fs private data attached to the folio. At that point, we will check if the folio is still dirty and decline to release the iomap_page. It is possible to trigger the warning in perfectly legitimate circumstances (eg if a disk read fails, we do a partial write to the folio, then we truncate the folio), which will cause those writes to be lost. Fixes: 60d8231089f0 ("iomap: Support large folios in invalidatepage") Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel Marcovitch <[email protected]> Date: Fri Jun 9 10:51:45 2023 +0000 iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbind [ Upstream commit 534103bcd52ca9c1fecbc70e717b4a538dc4ded8 ] When unbinding pasid - a race condition exists vs outstanding page faults. To prevent this, the pasid_state object contains a refcount. * set to 1 on pasid bind * incremented on each ppr notification start * decremented on each ppr notification done * decremented on pasid unbind Since refcount_dec assumes that refcount will never reach 0: the current implementation causes the following to be invoked on pasid unbind: REFCOUNT_WARN("decrement hit 0; leaking memory") Fix this issue by changing refcount_dec to refcount_dec_and_test to explicitly handle refcount=1. Fixes: 8bc54824da4e ("iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count") Signed-off-by: Daniel Marcovitch <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chengci.Xu <[email protected]> Date: Fri Jun 2 17:02:22 2023 +0800 iommu/mediatek: Fix two IOMMU share pagetable issue [ Upstream commit cf69ef46dbd980a0b1c956d668e066a73e0acd0f ] Prepare for mt8188 to fix a two IOMMU HWs share pagetable issue. We have two MM IOMMU HWs in mt8188, one is VPP-IOMMU, the other is VDO-IOMMU. The 2 MM IOMMU HWs share pagetable don't work in this case: a) VPP-IOMMU probe firstly. b) VDO-IOMMU probe. c) The master for VDO-IOMMU probe (means frstdata is vpp-iommu). d) The master in another domain probe. No matter it is vdo or vpp. Then it still create a new pagetable in step d). The problem is "frstdata->bank[0]->m4u_dom" was not initialized. Then when d) enter, it still create a new one. In this patch, we create a new variable "share_dom" for this share pgtable case, it should be helpful for readable. and put all the share pgtable logic in the mtk_iommu_domain_finalise. In mt8195, the master of VPP-IOMMU probes before than VDO-IOMMU from its dtsi node sequence, we don't see this issue in it. Prepare for mt8188. Fixes: 645b87c190c9 ("iommu/mediatek: Fix 2 HW sharing pgtable issue") Signed-off-by: Chengci.Xu <[email protected]> Signed-off-by: Yong Wu <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yong Wu <[email protected]> Date: Tue Oct 18 10:42:58 2022 +0800 iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data [ Upstream commit 9ff894edd542618dad2fef538f8272c620a501db ] Just remove a unused variable that only is for mtk_iommu_v1. Signed-off-by: Yong Wu <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Stable-dep-of: cf69ef46dbd9 ("iommu/mediatek: Fix two IOMMU share pagetable issue") Signed-off-by: Sasha Levin <[email protected]>
Author: AngeloGioacchino Del Regno <[email protected]> Date: Thu Jun 22 11:27:39 2023 +0200 iommu/qcom: Disable and reset context bank before programming [ Upstream commit 9f3fef23d9b5a858a6e6d5f478bb1b6b76265e76 ] Writing the new TTBRs, TCRs and MAIRs on a previously enabled context bank may trigger a context fault, resulting in firmware driven AP resets: change the domain initialization programming sequence to disable the context bank(s) and to also clear the related fault address (CB_FAR) and fault status (CB_FSR) registers before writing new values to TTBR0/1, TCR/TCR2, MAIR0/1. Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason Gunthorpe <[email protected]> Date: Mon Jul 24 14:36:05 2023 -0300 iommu/sprd: Add missing force_aperture [ Upstream commit d48a51286c698f7fe8efc688f23a532f4fe9a904 ] force_aperture was intended to false only by GART drivers that have an identity translation outside the aperture. This does not describe sprd, so add the missing 'force_aperture = true'. Fixes: b23e4fc4e3fa ("iommu: add Unisoc IOMMU basic driver") Signed-off-by: Jason Gunthorpe <[email protected]> Acked-by: Chunyan Zhang <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yanfei Xu <[email protected]> Date: Wed Aug 9 20:48:04 2023 +0800 iommu/vt-d: Fix to flush cache of PASID directory table [ Upstream commit 8a3b8e63f8371c1247b7aa24ff9c5312f1a6948b ] Even the PCI devices don't support pasid capability, PASID table is mandatory for a PCI device in scalable mode. However flushing cache of pasid directory table for these devices are not taken after pasid table is allocated as the "size" of table is zero. Fix it by calculating the size by page order. Found this when reading the code, no real problem encountered for now. Fixes: 194b3348bdbb ("iommu/vt-d: Fix PASID directory pointer coherency") Suggested-by: Lu Baolu <[email protected]> Signed-off-by: Yanfei Xu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Karlman <[email protected]> Date: Sat Jun 17 18:25:45 2023 +0000 iommu: rockchip: Fix directory table address encoding [ Upstream commit 6df63b7ebdaf5fcd75dceedf6967d0761e56eca1 ] The physical address to the directory table is currently encoded using the following bit layout for IOMMU v2. 31:12 - Address bit 31:0 11: 4 - Address bit 39:32 This is also the bit layout used by the vendor kernel. However, testing has shown that addresses to the directory/page tables and memory pages are all encoded using the same bit layout. IOMMU v1: 31:12 - Address bit 31:0 IOMMU v2: 31:12 - Address bit 31:0 11: 8 - Address bit 35:32 7: 4 - Address bit 39:36 Change to use the mk_dtentries ops to encode the directory table address correctly. The value written to DTE_ADDR may include the valid bit set, a bit that is ignored and DTE_ADDR reg read it back as 0. This also update the bit layout comment for the page address and the number of nybbles that are read back for DTE_ADDR comment. These changes render the dte_addr_phys and dma_addr_dte ops unused and is removed. Fixes: 227014b33f62 ("iommu: rockchip: Add internal ops to handle variants") Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Fixes: c987b65a574f ("iommu/rockchip: Fix physical address decoding") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiasheng Jiang <[email protected]> Date: Mon Jun 19 17:28:02 2023 +0800 ipmi:ssif: Add check for kstrdup [ Upstream commit c5586d0f711e9744d0cade39b0c4a2d116a333ca ] Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface") Signed-off-by: Jiasheng Jiang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Corey Minyard <[email protected]> Date: Mon Jun 19 11:43:33 2023 -0500 ipmi:ssif: Fix a memory leak when scanning for an adapter [ Upstream commit b8d72e32e1453d37ee5c8a219f24e7eeadc471ef ] The adapter scan ssif_info_find() sets info->adapter_name if the adapter info came from SMBIOS, as it's not set in that case. However, this function can be called more than once, and it will leak the adapter name if it had already been set. So check for NULL before setting it. Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface") Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yi Yang <[email protected]> Date: Thu Jun 29 20:33:28 2023 +0800 ipmi_si: fix a memleak in try_smi_init() commit 6cf1a126de2992b4efe1c3c4d398f8de4aed6e3f upstream. Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`. Cc: [email protected] # 4.19+ Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler") Signed-off-by: Yi Yang <[email protected]> Co-developed-by: GONG, Ruiqi <[email protected]> Signed-off-by: GONG, Ruiqi <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bibo Mao <[email protected]> Date: Fri Aug 11 17:58:04 2023 +0800 irqchip/loongson-eiointc: Fix return value checking of eiointc_index [ Upstream commit 2e99b73afde18853754c5fae8e8d1a66fe5e3f64 ] Return value of function eiointc_index is int, however it is converted into uint32_t and then compared smaller than zero, this will cause logic problem. Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support") Signed-off-by: Bibo Mao <[email protected]> Reviewed-by: Philippe Mathieu-Daudé <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Alexei Filippov <[email protected]> Date: Sat Aug 19 20:32:16 2023 +0300 jfs: validate max amount of blocks before allocation. [ Upstream commit 0225e10972fa809728b8d4c1bd2772b3ec3fdb57 ] The lack of checking bmp->db_max_freebud in extBalloc() can lead to shift out of bounds, so this patch prevents undefined behavior, because bmp->db_max_freebud == -1 only if there is no free space. Signed-off-by: Aleksei Filippov <[email protected]> Signed-off-by: Dave Kleikamp <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2 Signed-off-by: Sasha Levin <[email protected]>
Author: Miguel Ojeda <[email protected]> Date: Fri Jun 16 02:16:25 2023 +0200 kbuild: rust_is_available: add check for `bindgen` invocation [ Upstream commit 52cae7f28ed6c3992489f16bb355f5b623f0912e ] `scripts/rust_is_available.sh` calls `bindgen` with a special header in order to check whether the `libclang` version in use is suitable. However, the invocation itself may fail if, for instance, `bindgen` cannot locate `libclang`. This is fine for Kconfig (since the script will still fail and therefore disable Rust as it should), but it is pretty confusing for users of the `rustavailable` target given the error will be unrelated: ./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + " make: *** [Makefile:1816: rustavailable] Error 2 Instead, run the `bindgen` invocation independently in a previous step, saving its output and return code. If it fails, then show the user a proper error message. Otherwise, continue as usual with the saved output. Since the previous patch we show a reference to the docs, and the docs now explain how `bindgen` looks for `libclang`, thus the error message can leverage the documentation, avoiding duplication here (and making users aware of the setup guide in the documentation). Reported-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/ Reported-by: François Valenduc <[email protected]> Closes: https://github.com/Rust-for-Linux/linux/issues/934 Reported-by: Alexandru Radovici <[email protected]> Closes: https://github.com/Rust-for-Linux/linux/pull/921 Reported-by: Matthew Leach <[email protected]> Closes: https://lore.kernel.org/rust-for-linux/[email protected]/ Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`") Reviewed-by: Martin Rodriguez Reboredo <[email protected]> Reviewed-by: Masahiro Yamada <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Miguel Ojeda <[email protected]> Date: Fri Jun 16 02:16:27 2023 +0200 kbuild: rust_is_available: fix confusion when a version appears in the path [ Upstream commit 9eb7e20e0c5cd069457845f965b3e8a7d736ecb7 ] `bindgen`'s output for `libclang`'s version check contains paths, which in turn may contain strings that look like version numbers [1][2]: .../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0 [-W#pragma-messages], err: false which the script will pick up as the version instead of the latter. It is also the case that versions may appear after the actual version (e.g. distribution's version text), which was the reason behind `head` [3]: .../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false Thus instead ask for a match after the `clang version` string. Reported-by: Jordan Isaacs <[email protected]> Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1] Reported-by: "Ethan D. Twardy" <[email protected]> Closes: https://lore.kernel.org/rust-for-linux/[email protected]/ [2] Reported-by: Tiago Lam <[email protected]> Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3] Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`") Reviewed-by: Martin Rodriguez Reboredo <[email protected]> Reviewed-by: Ethan Twardy <[email protected]> Tested-by: Ethan Twardy <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Russell Currey <[email protected]> Date: Fri Jun 16 02:16:22 2023 +0200 kbuild: rust_is_available: fix version check when CC has multiple arguments [ Upstream commit dee3a6b819c96fc8b1907577f585fd66f5c0fefe ] rust_is_available.sh uses cc-version.sh to identify which C compiler is in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to be able to handle multiple arguments in one variable, i.e. "ccache clang". Its invocation in rust_is_available.sh quotes "$CC", which makes $1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang. cc-version.sh could also be changed to handle having "ccache clang" as one argument, but it only has the one consumer upstream, making it simpler to fix the caller here. Signed-off-by: Russell Currey <[email protected]> Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`") Link: https://github.com/Rust-for-Linux/linux/pull/873 [ Reworded title prefix and reflow line to 75 columns. ] Reviewed-by: Martin Rodriguez Reboredo <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Masahiro Yamada <[email protected]> Date: Fri Jun 16 02:16:21 2023 +0200 kbuild: rust_is_available: remove -v option [ Upstream commit d824d2f98565e7c4cb1b862c230198fbe1a968be ] The -v option is passed when this script is invoked from Makefile, but not when invoked from Kconfig. As you can see in scripts/Kconfig.include, the 'success' macro suppresses stdout and stderr anyway, so this script does not need to be quiet. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Miguel Ojeda <[email protected]> Tested-by: Miguel Ojeda <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ Reworded prefix to match the others in the patch series. ] Reviewed-by: Martin Rodriguez Reboredo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]> Stable-dep-of: dee3a6b819c9 ("kbuild: rust_is_available: fix version check when CC has multiple arguments") Signed-off-by: Sasha Levin <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Mon Jul 24 14:18:16 2023 +0200 kernfs: add stub helper for kernfs_generic_poll() [ Upstream commit 79038a99445f69c5d28494dd4f8c6f0509f65b2e ] In some randconfig builds, kernfs ends up being disabled, so there is no prototype for kernfs_generic_poll() In file included from kernel/sched/build_utility.c:97: kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration] kernfs_generic_poll(t->of, wait); ^ Add a stub helper for it, as we have it for other kernfs functions. Fixes: aff037078ecae ("sched/psi: use kernfs polling functions for PSI trigger polling") Fixes: 147e1a97c4a0b ("fs: kernfs: add poll file operation") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Chengming Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Masami Hiramatsu (Google) <[email protected]> Date: Tue Jul 11 10:50:47 2023 +0900 kprobes: Prohibit probing on CFI preamble symbol [ Upstream commit de02f2ac5d8cfb311f44f2bf144cc20002f1fbbd ] Do not allow to probe on "__cfi_" or "__pfx_" started symbol, because those are used for CFI and not executed. Probing it will break the CFI. Link: https://lore.kernel.org/all/168904024679.116016.18089228029322008512.stgit@devnote2/ Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Sun Jul 23 15:27:37 2023 +0900 ksmbd: fix out of bounds in init_smb2_rsp_hdr() [ Upstream commit 536bb492d39bb6c080c92f31e8a55fe9934f452b ] If client send smb2 negotiate request and then send smb1 negotiate request, init_smb2_rsp_hdr is called for smb1 negotiate request since need_neg is set to false. This patch ignore smb1 packets after ->need_neg is set to false. Reported-by: [email protected] # ZDI-CAN-21541 Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Sat Jul 22 00:09:28 2023 +0900 ksmbd: fix out of bounds in smb3_decrypt_req() [ Upstream commit dc318846f3dd54574a36ae97fc8d8b75dd7cdb1e ] smb3_decrypt_req() validate if pdu_length is smaller than smb2_transform_hdr size. Reported-by: [email protected] # ZDI-CAN-21589 Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Sun Jul 23 15:22:33 2023 +0900 ksmbd: no response from compound read [ Upstream commit e202a1e8634b186da38cbbff85382ea2b9e297cf ] ksmbd doesn't support compound read. If client send read-read in compound to ksmbd, there can be memory leak from read buffer. Windows and linux clients doesn't send it to server yet. For now, No response from compound read. compound read will be supported soon. Reported-by: [email protected] # ZDI-CAN-21587, ZDI-CAN-21588 Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Namjae Jeon <[email protected]> Date: Sun Jul 23 15:21:11 2023 +0900 ksmbd: validate session id and tree id in compound request [ Upstream commit 3df0411e132ee74a87aa13142dfd2b190275332e ] `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound. Reported-by: [email protected] # ZDI-CAN-21506 Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Torokhov <[email protected]> Date: Fri Jul 14 15:45:32 2023 -0700 kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() [ Upstream commit 9e0f4f2918c2ff145d3dedee862d9919a6ed5812 ] kvm_vfio_group_add() creates kvg instance, links it to kv->group_list, and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after dropping kv->lock. If we race group addition and deletion calls, kvg instance may get freed by the time we get around to calling kvm_vfio_file_set_kvm(). Previous iterations of the code did not reference kvg->file outside of the critical section, but used a temporary variable. Still, they had similar problem of the file reference being owned by kvg structure and potential for kvm_vfio_group_del() dropping it before kvm_vfio_group_add() had a chance to complete. Fix this by moving call to kvm_vfio_file_set_kvm() under the protection of kv->lock. We already call it while holding the same lock when vfio group is being deleted, so it should be safe here as well. Fixes: 2fc1bec15883 ("kvm: set/clear kvm to/from vfio_group when group add/delete") Reviewed-by: Alex Williamson <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yi Liu <[email protected]> Date: Tue Jul 18 06:55:29 2023 -0700 kvm/vfio: Prepare for accepting vfio device fd [ Upstream commit 2f99073a722beef5f74f3b0f32bda227ba3df1e0 ] This renames kvm_vfio_group related helpers to prepare for accepting vfio device fd. No functional change is intended. Reviewed-by: Kevin Tian <[email protected]> Reviewed-by: Eric Auger <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Tested-by: Terrence Xu <[email protected]> Tested-by: Nicolin Chen <[email protected]> Tested-by: Matthew Rosato <[email protected]> Tested-by: Yanting Jiang <[email protected]> Tested-by: Shameer Kolothum <[email protected]> Tested-by: Zhenzhong Duan <[email protected]> Signed-off-by: Yi Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]> Stable-dep-of: 9e0f4f2918c2 ("kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()") Signed-off-by: Sasha Levin <[email protected]>
Author: Sean Christopherson <[email protected]> Date: Thu Jun 1 17:58:59 2023 -0700 KVM: x86/mmu: Add "never" option to allow sticky disabling of nx_huge_pages commit 0b210faf337314e4bc88e796218bc70c72a51209 upstream. Add a "never" option to the nx_huge_pages module param to allow userspace to do a one-way hard disabling of the mitigation, and don't create the per-VM recovery threads when the mitigation is hard disabled. Letting userspace pinky swear that userspace doesn't want to enable NX mitigation (without reloading KVM) allows certain use cases to avoid the latency problems associated with spawning a kthread for each VM. E.g. in FaaS use cases, the guest kernel is trusted and the host may create 100+ VMs per logical CPU, which can result in 100ms+ latencies when a burst of VMs is created. Reported-by: Li RongQing <[email protected]> Closes: https://lore.kernel.org/all/[email protected] Cc: Yong He <[email protected]> Cc: Robert Hoo <[email protected]> Cc: Kai Huang <[email protected]> Reviewed-by: Robert Hoo <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Luiz Capitulino <[email protected]> Reviewed-by: Li RongQing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sean Christopherson <[email protected]> [ Resolved a small conflict in arch/x86/kvm/mmu/mmu.c::kvm_mmu_post_init_vm() which is due kvm_nx_lpage_recovery_worker() being renamed in upstream commit 55c510e26ab6181c132327a8b90c864e6193ce27 ] Signed-off-by: Luiz Capitulino <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Sat Jan 14 10:39:11 2023 +0100 KVM: x86/mmu: Use kstrtobool() instead of strtobool() commit 11b36fe7d4500c8ef73677c087f302fd713101c2 upstream. strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/670882aa04dbdd171b46d3b20ffab87158454616.1673689135.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Luiz Capitulino <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Marek Behún <[email protected]> Date: Tue Aug 1 17:16:23 2023 +0200 leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false [ Upstream commit c3f853184bed04105682383c2971798c572226b5 ] At the time we call BUG_ON(props.color == LED_COLOR_ID_MULTI); the props variable is still initialized to zero. Call the BUG_ON only after we parse fwnode into props. Fixes: 77dce3a22e89 ("leds: disallow /sys/class/leds/*:multi:* for now") Signed-off-by: Marek Behún <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Behún <[email protected]> Date: Tue Aug 1 14:49:31 2023 +0200 leds: multicolor: Use rounded division when calculating color components [ Upstream commit 065d099f1be58187e6629273c50b948a02b7e1bf ] Given channel intensity, LED brightness and max LED brightness, the multicolor LED framework helper led_mc_calc_color_components() computes the color channel brightness as chan_brightness = brightness * chan_intensity / max_brightness Consider the situation when (brightness, intensity, max_brightness) is for example (16, 15, 255), then chan_brightness is computed to 0 although the fractional divison would give 0.94, which should be rounded to 1. Use DIV_ROUND_CLOSEST here for the division to give more realistic component computation: chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity, max_brightness) Fixes: 55d5d3b46b08 ("leds: multicolor: Introduce a multicolor class definition") Signed-off-by: Marek Behún <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Tue Jul 11 09:13:34 2023 +0300 leds: pwm: Fix error code in led_pwm_create_fwnode() [ Upstream commit cadb2de2a7fd9e955381307de3eddfcc386c208e ] Negative -EINVAL was intended, not positive EINVAL. Fix it. Fixes: 95138e01275e ("leds: pwm: Make error handling more robust") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Behún <[email protected]> Date: Wed Aug 2 11:07:53 2023 +0200 leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead [ Upstream commit 730094577e0c37e1bc40be37cbd41f71b0a8a2a4 ] The tty LED trigger uses the obsolete LED_ON & LED_OFF constants when setting LED brightness. This is bad because the LED_ON constant is equal to 1, and so when activating the tty LED trigger on a LED class device with max_brightness greater than 1, the LED is dimmer than it can be (when max_brightness is 255, the LED is very dimm indeed; some devices translate 1/255 to 0, so the LED is OFF all the time). Instead of directly setting brightness to a specific value, use the led_blink_set_oneshot() function from LED core to configure the blink. This function takes the current configured brightness as blink brightness if not zero, and max brightness otherwise. This also changes the behavior of the TTY LED trigger. Previously if rx/tx stats kept changing, the LED was ON all the time they kept changing. With this patch the LED will blink on TTY activity. Fixes: fd4a641ac88f ("leds: trigger: implement a tty trigger") Signed-off-by: Marek Behún <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andrii Nakryiko <[email protected]> Date: Mon Jul 10 19:41:50 2023 -0700 libbpf: Fix realloc API handling in zero-sized edge cases [ Upstream commit 8a0260dbf6553c969248b6530cafadac46562f47 ] realloc() and reallocarray() can either return NULL or a special non-NULL pointer, if their size argument is zero. This requires a bit more care to handle NULL-as-valid-result situation differently from NULL-as-error case. This has caused real issues before ([0]), and just recently bit again in production when performing bpf_program__attach_usdt(). This patch fixes 4 places that do or potentially could suffer from this mishandling of NULL, including the reported USDT-related one. There are many other places where realloc()/reallocarray() is used and NULL is always treated as an error value, but all those have guarantees that their size is always non-zero, so those spot don't need any extra handling. [0] d08ab82f59d5 ("libbpf: Fix double-free when linker processes empty sections") Fixes: 999783c8bbda ("libbpf: Wire up spec management and other arch-independent USDT logic") Fixes: b63b3c490eee ("libbpf: Add bpf_program__set_insns function") Fixes: 697f104db8a6 ("libbpf: Support custom SEC() handlers") Fixes: b12688267280 ("libbpf: Change the order of data and text relocations.") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Wed Sep 13 09:43:05 2023 +0200 Linux 6.1.53 Link: https://lore.kernel.org/r/[email protected] Tested-by: Shuah Khan <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Takeshi Ogasawara <[email protected]> Tested-by: Conor Dooley <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Florian Fainelli <[email protected]> Tested-by: Guenter Roeck <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]> Tested-by: Ron Economos <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Qi Hu <[email protected]> Date: Thu Jun 15 14:35:52 2023 +0800 LoongArch: Fix the write_fcsr() macro [ Upstream commit 346dc929623cef70ff7832a4fa0ffd1b696e312a ] The "write_fcsr()" macro uses wrong the positions for val and dest in asm. Fix it! Reported-by: Miao HAO <[email protected]> Signed-off-by: Qi Hu <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hongchen Zhang <[email protected]> Date: Thu Jun 15 14:35:52 2023 +0800 LoongArch: Let pmd_present() return true when splitting pmd [ Upstream commit ddc1729b07cc84bb29f577698b8d2e74a4004a6e ] When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should return true, otherwise it would be treated as a swap pmd. This is the same as arm64 does in commit b65399f6111b ("arm64/mm: Change THP helpers to comply with generic MM semantics"), we also add a new bit named _PAGE_PRESENT_INVALID for LoongArch. Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hongchen Zhang <[email protected]> Date: Wed Sep 6 22:53:09 2023 +0800 LoongArch: mm: Add p?d_leaf() definitions commit 303be4b33562a5b689261ced1616bf16ad49efa7 upstream. When I do LTP test, LTP test case ksm06 caused panic at break_ksm_pmd_entry -> pmd_leaf (Huge page table but False) -> pte_present (panic) The reason is pmd_leaf() is not defined, So like commit 501b81046701 ("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for LoongArch. Fixes: 09cfefb7fa70 ("LoongArch: Add memory management") Cc: [email protected] Acked-by: David Hildenbrand <[email protected]> Signed-off-by: Hongchen Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yan Zhai <[email protected]> Date: Thu Aug 17 19:58:14 2023 -0700 lwt: Check LWTUNNEL_XMIT_CONTINUE strictly [ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ] LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2, such that any positive return value from a xmit hook could cause unexpected continue behavior, despite that related skb may have been freed. This could be error-prone for future xmit hook ops. One of the possible errors is to return statuses of dst_output directly. To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to distinguish from dst_output statuses and check the continue condition explicitly. Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Suggested-by: Dan Carpenter <[email protected]> Signed-off-by: Yan Zhai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com Signed-off-by: Sasha Levin <[email protected]>
Author: Yan Zhai <[email protected]> Date: Thu Aug 17 19:58:11 2023 -0700 lwt: Fix return values of BPF xmit ops [ Upstream commit 29b22badb7a84b783e3a4fffca16f7768fb31205 ] BPF encap ops can return different types of positive values, such like NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in ip(6)_finish_output2. When this happens, skbs that have been freed would continue to the neighbor subsystem, causing use-after-free bug and kernel crashes. To fix the incorrect behavior, skb_do_redirect return values can be simply discarded, the same as tc-egress behavior. On the other hand, bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU information. Thus convert its return values to avoid the conflict with LWTUNNEL_XMIT_CONTINUE. Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Reported-by: Jordan Griege <[email protected]> Suggested-by: Martin KaFai Lau <[email protected]> Suggested-by: Stanislav Fomichev <[email protected]> Signed-off-by: Yan Zhai <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/0d2b878186cfe215fec6b45769c1cd0591d3628d.1692326837.git.yan@cloudflare.com Signed-off-by: Sasha Levin <[email protected]>
Author: Ben Hutchings <[email protected]> Date: Fri Jun 16 17:36:10 2023 +0200 m68k: Fix invalid .section syntax [ Upstream commit 922a9bd138101e3e5718f0f4d40dba68ef89bb43 ] gas supports several different forms for .section for ELF targets, including: .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]] and: .section "NAME"[, #FLAGS...] In several places we use a mix of these two forms: .section NAME, #FLAGS... A current development snapshot of binutils (2.40.50.20230611) treats this mixed syntax as an error. Change to consistently use: .section NAME, "FLAGS" as is used elsewhere in the kernel. Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1 Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Jan-Benedict Glaw <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Fri Jun 23 17:24:00 2023 +0200 mac80211: make ieee80211_tx_info padding explicit [ Upstream commit a7a2ef0c4b3efbd7d6f3fabd87dbbc0b3f2de5af ] While looking at a bug, I got rather confused by the layout of the 'status' field in ieee80211_tx_info. Apparently, the intention is that status_driver_data[] is used for driver specific data, and fills up the size of the union to 40 bytes, just like the other ones. This is indeed what actually happens, but only because of the combination of two mistakes: - "void *status_driver_data[18 / sizeof(void *)];" is intended to be 18 bytes long but is actually two bytes shorter because of rounding-down in the division, to a multiple of the pointer size (4 bytes or 8 bytes). - The other fields combined are intended to be 22 bytes long, but are actually 24 bytes because of padding in front of the unaligned tx_time member, and in front of the pointer array. The two mistakes cancel out. so the size ends up fine, but it seems more helpful to make this explicit, by having a multiple of 8 bytes in the size calculation and explicitly describing the padding. Fixes: ea5907db2a9cc ("mac80211: fix struct ieee80211_tx_info size") Fixes: 02219b3abca59 ("mac80211: add WMM admission control support") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Thu Jul 6 16:37:27 2023 +0800 md/md-bitmap: hold 'reconfig_mutex' in backlog_store() [ Upstream commit 44abfa6a95df425c0660d56043020b67e6d93ab8 ] Several reasons why 'reconfig_mutex' should be held: 1) rdev_for_each() is not safe to be called without the lock, because rdev can be removed concurrently. 2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not be called concurrently. 3) mddev_suspend() from mddev_destroy/create_serial_pool() should be protected by the lock. Fixes: 10c92fca636e ("md-bitmap: create and destroy wb_info_pool with the change of backlog") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Thu Jul 6 16:37:26 2023 +0800 md/md-bitmap: remove unnecessary local variable in backlog_store() [ Upstream commit b4d129640f194ffc4cc64c3e97f98ae944c072e8 ] Local variable is definied first in the beginning of backlog_store(), there is no need to define it again. Fixes: 8c13ab115b57 ("md/bitmap: don't set max_write_behind if there is no write mostly device") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jan Kara <[email protected]> Date: Mon Aug 14 11:27:07 2023 +0200 md/raid0: Factor out helper for mapping and submitting a bio [ Upstream commit af50e20afb401cc203bd2a9ff62ece0ae4976103 ] Factor out helper function for mapping and submitting a bio out of raid0_make_request(). We will use it later for submitting both parts of a split bio. Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes") Signed-off-by: Sasha Levin <[email protected]>
Author: Jan Kara <[email protected]> Date: Mon Aug 14 11:27:08 2023 +0200 md/raid0: Fix performance regression for large sequential writes [ Upstream commit 319ff40a542736d67e5bce18635de35d0e7a0bff ] Commit f00d7c85be9e ("md/raid0: fix up bio splitting.") among other things changed how bio that needs to be split is submitted. Before this commit, we have split the bio, mapped and submitted each part. After this commit, we map only the first part of the split bio and submit the second part unmapped. Due to bio sorting in __submit_bio_noacct() this results in the following request ordering: 9,0 18 1181 0.525037895 15995 Q WS 1479315464 + 63392 Split off chunk-sized (1024 sectors) request: 9,0 18 1182 0.629019647 15995 X WS 1479315464 / 1479316488 Request is unaligned to the chunk so it's split in raid0_make_request(). This is the first part mapped and punted to bio_list: 8,0 18 7053 0.629020455 15995 A WS 739921928 + 1016 <- (9,0) 1479315464 Now raid0_make_request() returns, second part is postponed on bio_list. __submit_bio_noacct() resorts the bio_list, mapped request is submitted to the underlying device: 8,0 18 7054 0.629022782 15995 G WS 739921928 + 1016 Now we take another request from the bio_list which is the remainder of the original huge request. Split off another chunk-sized bit from it and the situation repeats: 9,0 18 1183 0.629024499 15995 X WS 1479316488 / 1479317512 8,16 18 6998 0.629025110 15995 A WS 739921928 + 1016 <- (9,0) 1479316488 8,16 18 6999 0.629026728 15995 G WS 739921928 + 1016 ... 9,0 18 1184 0.629032940 15995 X WS 1479317512 / 1479318536 [libnetacq-write] 8,0 18 7059 0.629033294 15995 A WS 739922952 + 1016 <- (9,0) 1479317512 8,0 18 7060 0.629033902 15995 G WS 739922952 + 1016 ... This repeats until we consume the whole original huge request. Now we finally get to processing the second parts of the split off requests (in reverse order): 8,16 18 7181 0.629161384 15995 A WS 739952640 + 8 <- (9,0) 1479377920 8,0 18 7239 0.629162140 15995 A WS 739952640 + 8 <- (9,0) 1479376896 8,16 18 7186 0.629163881 15995 A WS 739951616 + 8 <- (9,0) 1479375872 8,0 18 7242 0.629164421 15995 A WS 739951616 + 8 <- (9,0) 1479374848 ... I guess it is obvious that this IO pattern is extremely inefficient way to perform sequential IO. It also makes bio_list to grow to rather long lengths. Change raid0_make_request() to map both parts of the split bio. Since we know we are provided with at most chunk-sized bios, we will always need to split the incoming bio at most once. Fixes: f00d7c85be9e ("md/raid0: fix up bio splitting.") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Li Nan <[email protected]> Date: Sat Jul 1 16:05:28 2023 +0800 md/raid10: factor out dereference_rdev_and_rrdev() [ Upstream commit b99f8fd2d91eb734f13098aa1cf337edaca454b7 ] Factor out a helper to get 'rdev' and 'replacement' from config->mirrors. Just to make code cleaner and prepare to fix the bug of io loss while 'replacement' replace 'rdev'. There is no functional change. Signed-off-by: Li Nan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Stable-dep-of: 673643490b9a ("md/raid10: use dereference_rdev_and_rrdev() to get devices") Signed-off-by: Sasha Levin <[email protected]>
Author: Li Nan <[email protected]> Date: Sat Jul 1 16:05:29 2023 +0800 md/raid10: use dereference_rdev_and_rrdev() to get devices [ Upstream commit 673643490b9a0eb3b25633abe604f62b8f63dba1 ] Commit 2ae6aaf76912 ("md/raid10: fix io loss while replacement replace rdev") reads replacement first to prevent io loss. However, there are same issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by using dereference_rdev_and_rrdev() to get devices. Fixes: d30588b2731f ("md/raid10: improve raid10 discard request") Fixes: f2e7e269a752 ("md/raid10: pull the code that wait for blocked dev into one function") Signed-off-by: Li Nan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Sat Jul 8 17:17:27 2023 +0800 md/raid5-cache: fix a deadlock in r5l_exit_log() [ Upstream commit a705b11b358dee677aad80630e7608b2d5f56691 ] Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing work") introduce a new problem: // caller hold reconfig_mutex r5l_exit_log flush_work(&log->disable_writeback_work) r5c_disable_writeback_async wait_event /* * conf->log is not NULL, and mddev_trylock() * will fail, wait_event() can never pass. */ conf->log = NULL Fix this problem by setting 'config->log' to NULL before wake_up() as it used to be, so that wait_event() from r5c_disable_writeback_async() can exist. In the meantime, move forward md_unregister_thread() so that null-ptr-deref this commit fixed can still be fixed. Fixes: b13015af94cf ("md/raid5-cache: Clear conf->log after finishing work") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Tue Aug 8 18:49:12 2023 +0800 md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid() [ Upstream commit 0d0bd28c500173bfca78aa840f8f36d261ef1765 ] r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is empty, and then submit 'flush_bio', however, r5l_log_flush_endio() is clearing the list first and then clear the bio, which will cause null-ptr-deref: T1: submit flush io raid5d handle_active_stripes r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init submit_bio // io1 T2: io1 is done r5l_log_flush_endio list_splice_tail_init // clear the list T3: submit new flush io ... r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init bio_uninit // clear bio->bi_blkg submit_bio // null-ptr-deref Fix this problem by clearing bio before clearing the list in r5l_log_flush_endio(). Fixes: 0dd00cba99c3 ("raid5-cache: fully initialize flush_bio when needed") Reported-and-tested-by: Corey Hickey <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mariusz Tkaczyk <[email protected]> Date: Mon Mar 6 14:03:17 2023 +0100 md: add error_handlers for raid0 and linear [ Upstream commit c31fea2f8e2a72c817f318016bbc327095175a9f ] After the commit 9631abdbf406c("md: Set MD_BROKEN for RAID1 and RAID10") MD_BROKEN must be set if array is failed because state_store() checks it. If it is set then -EBUSY is returned to userspace. For raid0 and linear MD_BROKEN is not set by error_handler(). As a result mdadm is unable to trigger clean-up actions. It is a regression. This patch adds appropriate error_handler for raid0 and linear. The error handler sets MD_BROKEN for this device. Reviewed-by: Xiao Ni <[email protected]> Signed-off-by: Mariusz Tkaczyk <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes") Signed-off-by: Sasha Levin <[email protected]>
Author: Xiao Ni <[email protected]> Date: Tue Jan 31 13:17:10 2023 +0800 md: Change active_io to percpu [ Upstream commit 72adae23a72cb12e2ef0dcd7c0aa042867f27998 ] Now the type of active_io is atomic. It's used to count how many ios are in the submitting process and it's added and decreased very time. But it only needs to check if it's zero when suspending the raid. So we can switch atomic to percpu to improve the performance. After switching active_io to percpu type, we use the state of active_io to judge if the raid device is suspended. And we don't need to wake up ->sb_wait in md_handle_request anymore. It's done in the callback function which is registered when initing active_io. The argument mddev->suspended is only used to count how many users are trying to set raid to suspend state. Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()") Signed-off-by: Sasha Levin <[email protected]>
Author: Xiao Ni <[email protected]> Date: Tue Jan 31 13:17:09 2023 +0800 md: Factor out is_md_suspended helper [ Upstream commit d19329133d25ad3dc32f8a62635692cb2f189014 ] This helper function will be used in next patch. It's easy for understanding. Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()") Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Tue Mar 28 17:44:00 2023 +0800 md: fix regression for null-ptr-deference in __md_stop() commit 433279beba1d4872da10b7b60a539e0cb828b32b upstream. Commit 3e453522593d ("md: Free resources in __md_stop") tried to fix null-ptr-deference for 'active_io' by moving percpu_ref_exit() to __md_stop(), however, the commit also moving 'writes_pending' to __md_stop(), and this will cause mdadm tests broken: BUG: kernel NULL pointer dereference, address: 0000000000000038 Oops: 0000 [#1] PREEMPT SMP CPU: 15 PID: 17830 Comm: mdadm Not tainted 6.3.0-rc3-next-20230324-00009-g520d37 RIP: 0010:free_percpu+0x465/0x670 Call Trace: <TASK> __percpu_ref_exit+0x48/0x70 percpu_ref_exit+0x1a/0x90 __md_stop+0xe9/0x170 do_md_stop+0x1e1/0x7b0 md_ioctl+0x90c/0x1aa0 blkdev_ioctl+0x19b/0x400 vfs_ioctl+0x20/0x50 __x64_sys_ioctl+0xba/0xe0 do_syscall_64+0x6c/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0xcd And the problem can be reporduced 100% by following test: mdadm -CR /dev/md0 -l1 -n1 /dev/sda --force echo inactive > /sys/block/md0/md/array_state echo read-auto > /sys/block/md0/md/array_state echo inactive > /sys/block/md0/md/array_state Root cause: // start raid raid1_run mddev_init_writes_pending percpu_ref_init // inactive raid array_state_store do_md_stop __md_stop percpu_ref_exit // start raid again array_state_store do_md_run raid1_run mddev_init_writes_pending if (mddev->writes_pending.percpu_count_ptr) // won't reinit // inactive raid again ... percpu_ref_exit -> null-ptr-deference Before the commit, 'writes_pending' is exited when mddev is freed, and it's safe to restart raid because mddev_init_writes_pending() already make sure that 'writes_pending' will only be initialized once. Fix the prblem by moving 'writes_pending' back, it's a litter hard to find the relationship between alloc memory and free memory, however, code changes is much less and we lived with this for a long time already. Fixes: 3e453522593d ("md: Free resources in __md_stop") Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xiao Ni <[email protected]> Date: Wed Feb 22 11:59:16 2023 +0800 md: Free resources in __md_stop commit 3e453522593d74a87cf68a38e14aa36ebca1dbcd upstream. If md_run() fails after ->active_io is initialized, then percpu_ref_exit is called in error path. However, later md_free_disk will call percpu_ref_exit again which leads to a panic because of null pointer dereference. It can also trigger this bug when resources are initialized but are freed in error path, then will be freed again in md_free_disk. BUG: kernel NULL pointer dereference, address: 0000000000000038 Oops: 0000 [#1] PREEMPT SMP Workqueue: md_misc mddev_delayed_delete RIP: 0010:free_percpu+0x110/0x630 Call Trace: <TASK> __percpu_ref_exit+0x44/0x70 percpu_ref_exit+0x16/0x90 md_free_disk+0x2f/0x80 disk_release+0x101/0x180 device_release+0x84/0x110 kobject_put+0x12a/0x380 kobject_put+0x160/0x380 mddev_delayed_delete+0x19/0x30 process_one_work+0x269/0x680 worker_thread+0x266/0x640 kthread+0x151/0x1b0 ret_from_fork+0x1f/0x30 For creating raid device, md raid calls do_md_run->md_run, dm raid calls md_run. We alloc those memory in md_run. For stopping raid device, md raid calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can free those memory resources in __md_stop. Fixes: 72adae23a72c ("md: Change active_io to percpu") Reported-and-tested-by: Yu Kuai <[email protected]> Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: David Jeffery <[email protected]> Date: Wed Aug 16 14:13:55 2023 -0400 md: raid0: account for split bio in iostat accounting [ Upstream commit cc22b5407e9ca76adb7efeed843146510b1b72a5 ] When a bio is split by md raid0, the newly created bio will not be tracked by md for I/O accounting. Only the portion of I/O still assigned to the original bio which was reduced by the split will be accounted for. This results in md iostat data sometimes showing I/O values far below the actual amount of data being sent through md. md_account_bio() needs to be called for all bio generated by the bio split. A simple example of the issue was generated using a raid0 device on partitions to the same device. Since all raid0 I/O then goes to one device, it makes it easy to see a gap between the md device and its sd storage. Reading an lvm device on top of the md device, the iostat output (some 0 columns and extra devices removed to make the data more compact) was: Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read md2 0.00 0.00 0.00 0.00 0 sde 0.00 0.00 0.00 0.00 0 md2 1364.00 411496.00 0.00 0.00 411496 sde 1734.00 646144.00 0.00 0.00 646144 md2 1699.00 510680.00 0.00 0.00 510680 sde 2155.00 802784.00 0.00 0.00 802784 md2 803.00 241480.00 0.00 0.00 241480 sde 1016.00 377888.00 0.00 0.00 377888 md2 0.00 0.00 0.00 0.00 0 sde 0.00 0.00 0.00 0.00 0 I/O was generated doing large direct I/O reads (12M) with dd to a linear lvm volume on top of the 4 leg raid0 device. The md2 reads were showing as roughly 2/3 of the reads to the sde device containing all of md2's raid partitions. The sum of reads to sde was 1826816 kB, which was the expected amount as it was the amount read by dd. With the patch, the total reads from md will match the reads from sde and be consistent with the amount of I/O generated. Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5") Signed-off-by: David Jeffery <[email protected]> Tested-by: Laurence Oberman <[email protected]> Reviewed-by: Laurence Oberman <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Yu Kuai <[email protected]> Date: Wed Jun 28 09:29:31 2023 +0800 md: restore 'noio_flag' for the last mddev_resume() [ Upstream commit e24ed04389f9619e0aaef615a8948633c182a8b0 ] memalloc_noio_save() is called for the first mddev_suspend(), and repeated mddev_suspend() only increase 'suspended'. However, memalloc_noio_restore() is also called for the first mddev_resume(), which means that memory reclaim will be enabled before the last mddev_resume() is called, while the array is still suspended. Fix this problem by restore 'noio_flag' for the last mddev_resume(). Fixes: 78f57ef9d50a ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sun Jun 18 20:17:40 2023 +0200 media: ad5820: Drop unsupported ad5823 from i2c_ and of_device_id tables [ Upstream commit f126ff7e4024f6704e6ec0d4137037568708a3c7 ] The supported ad5820 and ad5821 VCMs both use a single 16 bit register which is written by sending 2 bytes with the data directly after sending the i2c-client address. The ad5823 OTOH has a more typical i2c / smbus device setup with multiple 8 bit registers where the first byte send after the i2c-client address is the register address and the actual data only starts from the second byte after the i2c-client address. The ad5823 i2c_ and of_device_id-s was added at the same time as the ad5821 ids with as rationale: """ Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdf """ The AD5823 may be an electrical and functional replacement of the AD5820, but from a software pov it is not compatible at all and it is going to need its own driver, drop its id from the ad5820 driver. Fixes: b8bf73136bae ("media: ad5820: Add support for ad5821 and ad5823") Cc: Pavel Machek <[email protected]> Cc: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jun 13 17:14:08 2023 +0800 media: amphion: add helper function to get id name [ Upstream commit 12cd8b8ac02525977b2e860a877add10e8ce7468 ] convert numbers into meaningful names, then it can improve the log readability Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Signed-off-by: Ming Qian <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jul 18 17:50:13 2023 +0800 media: amphion: ensure the bitops don't cross boundaries [ Upstream commit 5bd28eae48589694ff4e5badb03bf75dae695b3f ] the supported_instance_count determine the instance index range, it shouldn't exceed the bits number of instance_mask, otherwise the bitops of instance_mask may cross boundaries Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jul 18 17:50:09 2023 +0800 media: amphion: fix CHECKED_RETURN issues reported by coverity [ Upstream commit b237b058adbc7825da9c8f358f1ff3f0467d623a ] calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs" without checking return value Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jul 18 17:50:10 2023 +0800 media: amphion: fix REVERSE_INULL issues reported by coverity [ Upstream commit 79d3bafaecc13bccab1ebbd28a15e669c5a4cdaf ] null-checking of a pointor is suggested before dereferencing it Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jul 18 17:50:11 2023 +0800 media: amphion: fix UNINIT issues reported by coverity [ Upstream commit c224d0497a31ea2d173e1ea16af308945bff9037 ] using uninitialized value may introduce risk Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jul 18 17:50:12 2023 +0800 media: amphion: fix UNUSED_VALUE issue reported by coverity [ Upstream commit cf6a06354989c41b536be8e094561ee16223cf1f ] assign value '-EINVAL' to ret, but the stored value is overwritten before it can be used Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Ming Qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Qian <[email protected]> Date: Tue Jun 13 15:48:46 2023 +0800 media: amphion: reinit vpu if reqbufs output 0 [ Upstream commit 73e3f09292a0492a3fe0f87a8170a74f12624c5e ] according to v4l2 stateful decoder document 4.5.1.3. State Machine, the state should change from seek to initialization if call VIDIOC_REQBUFS(OUTPUT, 0). so reinit the vpu decoder if reqbufs output 0 Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by: Ming Qian <[email protected]> Tested-by: Nicolas Dufresne <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Stein <[email protected]> Date: Tue Jan 31 11:32:44 2023 +0100 media: amphion: use dev_err_probe [ Upstream commit 517f088385e1b8015606143e6212cb30f8714070 ] This simplifies the code and silences -517 error messages. Also the reason is listed in /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: ming_qian <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans Verkuil <[email protected]> Date: Mon Jun 12 15:58:37 2023 +0200 media: cec: core: add adap_nb_transmit_canceled() callback [ Upstream commit da53c36ddd3f118a525a04faa8c47ca471e6c467 ] A potential deadlock was found by Zheng Zhang with a local syzkaller instance. The problem is that when a non-blocking CEC transmit is canceled by calling cec_data_cancel, that in turn can call the high-level received() driver callback, which can call cec_transmit_msg() to transmit a new message. The cec_data_cancel() function is called with the adap->lock mutex held, and cec_transmit_msg() tries to take that same lock. The root cause is that the received() callback can either be used to pass on a received message (and then adap->lock is not held), or to report a canceled transmit (and then adap->lock is held). This is confusing, so create a new low-level adap_nb_transmit_canceled callback that reports back that a non-blocking transmit was canceled. And the received() callback is only called when a message is received, as was the case before commit f9d0ecbf56f4 ("media: cec: correctly pass on reply results") complicated matters. Reported-by: Zheng Zhang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Fixes: f9d0ecbf56f4 ("media: cec: correctly pass on reply results") Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans Verkuil <[email protected]> Date: Mon Jun 12 15:58:38 2023 +0200 media: cec: core: add adap_unconfigured() callback [ Upstream commit 948a77aaecf202f722cf2264025f9987e5bd5c26 ] The adap_configured() callback was called with the adap->lock mutex held if the 'configured' argument was false, and without the adap->lock mutex held if that argument was true. That was very confusing, and so split this up in a adap_unconfigured() callback and a high-level configured() callback. This also makes it easier to understand when the mutex is held: all low-level adap_* callbacks are called with the mutex held. All other callbacks are called without that mutex held. Signed-off-by: Hans Verkuil <[email protected]> Fixes: f1b57164305d ("media: cec: add optional adap_configured callback") Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniil Dulov <[email protected]> Date: Fri Jun 2 01:55:01 2023 -0700 media: cx24120: Add retval check for cx24120_message_send() [ Upstream commit 96002c0ac824e1773d3f706b1f92e2a9f2988047 ] If cx24120_message_send() returns error, we should keep local struct unchanged. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 5afc9a25be8d ("[media] Add support for TechniSat Skystar S2") Signed-off-by: Daniil Dulov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniil Dulov <[email protected]> Date: Fri Mar 24 06:38:32 2023 -0700 media: dib7000p: Fix potential division by zero [ Upstream commit a1db7b2c5533fc67e2681eb5efc921a67bc7d5b8 ] Variable loopdiv can be assigned 0, then it is used as a denominator, without checking it for 0. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 713d54a8bd81 ("[media] DiB7090: add support for the dib7090 based") Signed-off-by: Daniil Dulov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [hverkuil: (bw != NULL) -> bw] Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Mon May 29 07:58:36 2023 +0200 media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() [ Upstream commit ea9ef6c2e001c5dc94bee35ebd1c8a98621cf7b8 ] 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. Fixes: a2ab06d7c4d6 ("media: m920x: don't use stack on USB reads") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Fri Sep 8 10:20:36 2023 +0100 media: dvb: symbol fixup for dvb_attach() commit 86495af1171e1feec79faa9b64c05c89f46e41d1 upstream. In commit 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable <[email protected]> Reported-by: Stefan Lippers-Hollmann <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Luis Chamberlain <[email protected]> Acked-by: Hans Verkuil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Colin Ian King <[email protected]> Date: Thu Jul 27 19:40:07 2023 +0200 media: go7007: Remove redundant if statement [ Upstream commit f33cb49081da0ec5af0888f8ecbd566bd326eed1 ] The if statement that compares msgs[i].len != 3 is always false because it is in a code block where msg[i].len is equal to 3. The check is redundant and can be removed. As detected by cppcheck static analysis: drivers/media/usb/go7007/go7007-i2c.c:168:20: warning: Opposite inner 'if' condition leads to a dead code block. [oppositeInnerCondition] Link: https://lore.kernel.org/linux-media/[email protected] Fixes: 866b8695d67e ("Staging: add the go7007 video driver") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sakari Ailus <[email protected]> Date: Thu Jun 15 10:29:07 2023 +0200 media: i2c: Add a camera sensor top level menu commit 7d3c7d2a2914e10bec3b9cdacdadb8e1f65f715a upstream. Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This also adds the options to drivers that don't specifically need them, these are still seldom used drivers using old APIs. The upside is that these should now all compile --- many drivers have had missing dependencies. The "menu" is replaced by selectable "menuconfig" to select the needed V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options. Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively depends on, and add the I2C dependency to the menu. Reported-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Cc: [email protected] # for >= 6.1 Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sakari Ailus <[email protected]> Date: Sat Jul 29 20:59:25 2023 +0200 media: i2c: ccs: Check rules is non-NULL commit 607bcc4213d998d051541d8f10b5bbb7d546c0be upstream. Fix the following smatch warning: drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address of NULL pointer 'rules' The CCS static data rule parser does not check an if rule has been obtained before checking for other rule types (which depend on the if rule). In practice this means parsing invalid CCS static data could lead to dereferencing a NULL pointer. Reported-by: Hans Verkuil <[email protected]> Fixes: a6b396f410b1 ("media: ccs: Add CCS static data parser library") Cc: [email protected] # for 5.11 and up Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Stevenson <[email protected]> Date: Mon Dec 5 15:21:45 2022 +0000 media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips [ Upstream commit 66274280b2c745d380508dc27b9a4dfd736e5eda ] The driver changes the Bayer order based on the flips, but does not define the control correctly with the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Signed-off-by: Dave Stevenson <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Stable-dep-of: 7b5a42e6ae71 ("media: ov2680: Remove auto-gain and auto-exposure controls") Signed-off-by: Sasha Levin <[email protected]>
Author: Jacopo Mondi <[email protected]> Date: Thu Aug 10 15:33:37 2023 +0200 media: i2c: rdacm21: Fix uninitialized value [ Upstream commit 33c7ae8f49e3413c81e879e1fdfcea4c5516e37b ] Fix the following smatch warning: drivers/media/i2c/rdacm21.c:373 ov10640_check_id() error: uninitialized symbol 'val'. Initialize 'val' to 0 in the ov10640_check_id() function. Fixes: 2b821698dc73 ("media: i2c: rdacm21: Power up OV10640 before OV490") Reported-by: Hans Verkuil <[email protected]> Signed-off-by: Jacopo Mondi <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Claudiu Beznea <[email protected]> Date: Thu Jun 15 12:30:30 2023 +0200 media: i2c: tvp5150: check return value of devm_kasprintf() [ Upstream commit 26ce7054d804be73935b9268d6e0ecf2fbbc8aef ] devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Signed-off-by: Claudiu Beznea <[email protected]> Reviewed-by: Marco Felsch <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Wed Jun 14 16:05:39 2023 +0300 media: mediatek: vcodec: fix potential double free [ Upstream commit be40f524b6edac4fb9a98ef79620fd9b9497a998 ] The "lat_buf->private_data" needs to be set to NULL to prevent a double free. How this would happen is if vdec_msg_queue_init() failed twice in a row and on the second time it failed earlier than on the first time. The vdec_msg_queue_init() function has a loop which does: for (i = 0; i < NUM_BUFFER_COUNT; i++) { Each iteration initializes one element in the msg_queue->lat_buf[] array and then the clean up function vdec_msg_queue_deinit() frees each element of the msg_queue->lat_buf[] array. This clean up code relies on the assumption that every element is either initialized or zeroed. Leaving a freed pointer which is non-zero breaks the assumption. Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Wed Jun 14 16:06:47 2023 +0300 media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init() [ Upstream commit cf10b0bb503c974ba049d6f888b21178be20a962 ] If we encounter any error in the vdec_msg_queue_init() then we need to set "msg_queue->wdma_addr.size = 0;". Normally, this is done inside the vdec_msg_queue_deinit() function. However, if the first call to allocate &msg_queue->wdma_addr fails, then the vdec_msg_queue_deinit() function is a no-op. For that situation, just set the size to zero explicitly and return. There were two other error paths which did not clean up before returning. Change those error paths to goto mem_alloc_err. Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture") Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Irui Wang <[email protected]> Date: Wed Jul 5 17:14:41 2023 +0800 media: mediatek: vcodec: Return NULL if no vdec_fb is found [ Upstream commit dfa2d6e07432270330ae191f50a0e70636a4cd2b ] "fb_use_list" is used to store used or referenced frame buffers for vp9 stateful decoder. "NULL" should be returned when getting target frame buffer failed from "fb_use_list", not a random unexpected one. Fixes: f77e89854b3e ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver") Signed-off-by: Irui Wang <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zheng Wang <[email protected]> Date: Fri Jul 7 17:24:14 2023 +0800 media: mtk-jpeg: Fix use after free bug due to uncanceled work [ Upstream commit c677d7ae83141d390d1253abebafa49c962afb52 ] In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run and mtk_jpeg_enc_device_run may be called to start the work. If we remove the module which will call mtk_jpeg_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in the mtk_jpeg_remove CPU0 CPU1 |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver") Signed-off-by: Zheng Wang <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:21 2023 +0200 media: ov2680: Add ov2680_fill_format() helper function [ Upstream commit 6d6849b2203f3244b575ba01d3e41ee19aa2cadf ] Add a ov2680_fill_format() helper function and use this everywhere were a v4l2_mbus_framefmt struct needs to be filled in so that the driver always fills it consistently. This is a preparation patch for fixing ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in the passed in v4l2_mbus_framefmt struct. Note that for ov2680_init_cfg() this now simply always fills the try_fmt struct of the passed in sd_state. This is correct because ov2680_init_cfg() is never called with a NULL sd_state so the old sd_state check is not necessary. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Acked-by: Rui Miguel Silva <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:20 2023 +0200 media: ov2680: Don't take the lock for try_fmt calls [ Upstream commit e521b9cc1a49de677f4fc65909ce4877fbf7b113 ] On ov2680_set_fmt() calls with format->which == V4L2_SUBDEV_FORMAT_TRY, ov2680_set_fmt() does not talk to the sensor. So in this case there is no need to lock the sensor->lock mutex or to check that the sensor is streaming. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Acked-by: Rui Miguel Silva <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:17 2023 +0200 media: ov2680: Fix ov2680_bayer_order() [ Upstream commit 50a7bad4e0a37d7018ab6fe843dd84bc6b2ecf72 ] The index into ov2680_hv_flip_bayer_order[] should be 0-3, but ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as max index, while the intention was to use: 0 + 1 + 2 as max index. Fix the index calculation in ov2680_bayer_order(), while at it also just use the ctrl values rather then reading them back using a slow i2c-read transaction. This also allows making the function void, since there now are no more i2c-reads to error check. Note the check for the ctrls being NULL is there to allow adding an ov2680_fill_format() helper later, which will call ov2680_set_bayer_order() during probe() before the ctrls are created. [Sakari Ailus: Change all users of ov2680_set_bayer_order() here] Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Reviewed-by: Daniel Scally <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:22 2023 +0200 media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY not working [ Upstream commit c0e97a4b4f20639f74cd5809b42ba6cbf9736a7d ] ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY was getting the try_fmt v4l2_mbus_framefmt struct from the passed in sd_state and then storing the contents of that into the return by reference format->format struct. While the right thing to do would be filling format->format based on the just looked up mode and then store the results of that in sd_state->pads[0].try_fmt . Before the previous change introducing ov2680_fill_format() this resulted in ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY always returning the zero-ed out sd_state->pads[0].try_fmt in format->format breaking callers using this. After the introduction of ov2680_fill_format() which at least initializes sd_state->pads[0].try_fmt properly, format->format is now always being filled with the default 800x600 mode set by ov2680_init_cfg() independent of the actual requested mode. Move the filling of format->format with ov2680_fill_format() to before the if (which == V4L2_SUBDEV_FORMAT_TRY) and then store the filled in format->format in sd_state->pads[0].try_fmt to fix this. Note this removes the fmt local variable because IMHO having a local variable which points to a sub-struct of one of the function arguments just leads to confusion when reading the code. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Acked-by: Rui Miguel Silva <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:23 2023 +0200 media: ov2680: Fix regulators being left enabled on ov2680_power_on() errors [ Upstream commit 84b4bd7e0d98166aa32fd470e672721190492eae ] When the ov2680_power_on() "sensor soft reset failed" path is hit during probe() the WARN() about putting an enabled regulator at drivers/regulator/core.c:2398 triggers 3 times (once for each regulator), filling dmesg with backtraces. Fix this by properly disabling the regulators on ov2680_power_on() errors. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Reviewed-by: Daniel Scally <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:18 2023 +0200 media: ov2680: Fix vflip / hflip set functions [ Upstream commit d5d08ad330c9ccebc5e066fda815423a290f48b0 ] ov2680_vflip_disable() / ov2680_hflip_disable() pass BIT(0) instead of 0 as value to ov2680_mod_reg(). While fixing this also: 1. Stop having separate enable/disable functions for hflip / vflip 2. Move the is_streaming check, which is unique to hflip / vflip into the ov2680_set_?flip() functions. for a nice code cleanup. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Reviewed-by: Daniel Scally <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:16 2023 +0200 media: ov2680: Remove auto-gain and auto-exposure controls [ Upstream commit 7b5a42e6ae71927359ea67a2c22570ba97fa4059 ] Quoting the OV2680 datasheet: "3.2 exposure and gain control In the OV2680, the exposure time and gain are set manually from an external controller. The OV2680 supports manual gain and exposure control only for normal applications, no auto mode." And indeed testing with the atomisp_ov2680 fork of ov2680.c has shown that auto-exposure and auto-gain do not work. Note that the code setting the auto-exposure flag was broken, callers of ov2680_exposure_set() were directly passing !!ctrls->auto_exp->val as "bool auto_exp" value, but ctrls->auto_exp is a menu control with: enum v4l2_exposure_auto_type { V4L2_EXPOSURE_AUTO = 0, V4L2_EXPOSURE_MANUAL = 1, ... So instead of passing !!ctrls->auto_exp->val they should have been passing ctrls->auto_exp->val == V4L2_EXPOSURE_AUTO, iow the passed value was inverted of what it should have been. Also remove ov2680_g_volatile_ctrl() since without auto support the gain and exposure controls are not volatile. This also fixes the control values not being properly applied in ov2680_mode_set(). The 800x600 mode register-list also sets gain, exposure and vflip overriding the last set ctrl values. ov2680_mode_set() does call ov2680_gain_set() and ov2680_exposure_set() but did this before writing the mode register-list, so these values would still be overridden by the mode register-list. Add a v4l2_ctrl_handler_setup() call after writing the mode register-list to restore all ctrl values. Also remove the ctrls->gain->is_new check from ov2680_gain_set() so that the gain always gets restored properly. Last since ov2680_mode_set() now calls v4l2_ctrl_handler_setup(), remove the v4l2_ctrl_handler_setup() call after ov2680_mode_restore() since ov2680_mode_restore() calls ov2680_mode_set(). Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Reviewed-by: Daniel Scally <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Aug 3 11:33:19 2023 +0200 media: ov2680: Remove VIDEO_V4L2_SUBDEV_API ifdef-s [ Upstream commit 49c282d5a8c5f4d1d9088622bec792294c716010 ] VIDEO_V4L2_SUBDEV_API is now automatically selected in Kconfig for all sensor drivers. Remove the ifdef CONFIG_VIDEO_V4L2_SUBDEV_API checks. This is a preparation patch for fixing ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in the passed in v4l2_mbus_framefmt struct. Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver") Reviewed-by: Daniel Scally <[email protected]> Acked-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Wed Aug 2 16:47:25 2023 +0200 media: ov5640: Enable MIPI interface in ov5640_set_power_mipi() [ Upstream commit 98cb72d3b9c5e03b10fa993752ecfcbd9c572d8c ] Set OV5640_REG_IO_MIPI_CTRL00 bit 2 to 1 instead of 0, since 1 means MIPI CSI2 interface, while 0 means CPI parallel interface. In the ov5640_set_power_mipi() the interface should obviously be set to MIPI CSI2 since this functions is used to power up the sensor when operated in MIPI CSI2 mode. The sensor should not be in CPI mode in that case. This fixes a corner case where capturing the first frame on i.MX8MN with CSI/ISI resulted in corrupted frame. Fixes: aa4bb8b8838f ("media: ov5640: Re-work MIPI startup sequence") Reviewed-by: Jacopo Mondi <[email protected]> Tested-by: Jacopo Mondi <[email protected]> # [Test on imx6q] Signed-off-by: Marek Vasut <[email protected]> Tested-by: Jai Luthra <[email protected]> # [Test on bplay, sk-am62] Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Marek Vasut <[email protected]> Date: Tue Jul 25 00:21:16 2023 +0200 media: ov5640: Fix initial RESETB state and annotate timings [ Upstream commit a210df337c5f5c2cd82f36c9dbb154ec63365c80 ] The initial state of RESETB input signal of OV5640 should be asserted, i.e. the sensor should be in reset. This is not the case, make it so. Since the subsequent assertion of RESETB signal is no longer necessary and the timing of the power sequencing could be slightly adjusted, add annotations to the delays which match OV5640 datasheet rev. 2.03, both: figure 2-3 power up timing with internal DVDD figure 2-4 power up timing with external DVDD source The 5..10ms delay between PWDN assertion and RESETB assertion is not even documented in the power sequencing diagram, and with this reset fix, it is no longer even necessary. Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver") Reported-by: Jacopo Mondi <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> Tested-by: Jai Luthra <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guoniu.zhou <[email protected]> Date: Mon Jun 12 04:43:40 2023 +0200 media: ov5640: fix low resolution image abnormal issue [ Upstream commit a828002f38c5ee49d3f0c0e64c0f0caa1aec8dc2 ] OV5640 will output abnormal image data when work at low resolution (320x240, 176x144 and 160x120) after switching from high resolution, such as 1080P, the time interval between high and low switching must be less than 1000ms in order to OV5640 don't enter suspend state during the time. The reason is by 0x3824 value don't restore to initialize value when do resolution switching. In high resolution setting array, 0x3824 is set to 0x04, but low resolution setting array remove 0x3824 in commit db15c1957a2d ("media: ov5640: Remove duplicated mode settings"). So when do resolution switching from high to low, such as 1080P to 320x240, and the time interval is less than auto suspend delay time which means global initialize setting array will not be loaded, the output image data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c to avoid same issue. Fixes: db15c1957a2d ("media: ov5640: Remove duplicated mode settings") Signed-off-by: Guoniu.zhou <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nikolay Burykin <[email protected]> Date: Tue Jan 10 10:09:00 2023 +0100 media: pci: cx23885: fix error handling for cx23885 ATSC boards [ Upstream commit 4aaa96b59df5fac41ba891969df6b092061ea9d7 ] After having been assigned to NULL value at cx23885-dvb.c:1202, pointer '0' is dereferenced at cx23885-dvb.c:2469. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Nikolay Burykin <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Tue Jun 6 06:38:15 2023 +0200 media: pulse8-cec: handle possible ping error [ Upstream commit 92cbf865ea2e0f2997ff97815c6db182eb23df1b ] Handle (and warn about) possible error waiting for MSGCODE_PING result. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Gaignard <[email protected]> Date: Mon Jul 17 17:06:11 2023 +0200 media: rkvdec: increase max supported height for H.264 [ Upstream commit f000e6ca2d60fefd02a180a57df2c4162fa0c1b7 ] After testing it is possible for the hardware to decode H264 bistream with a height up to 2560. Signed-off-by: Benjamin Gaignard <[email protected]> Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver") Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Gaignard <[email protected]> Date: Wed May 24 16:07:38 2023 +0800 media: uapi: HEVC: Add num_delta_pocs_of_ref_rps_idx field [ Upstream commit ae440c5da33cdb90a109f2df2a0360c67b3fab7e ] Some drivers firmwares parse by themselves slice header and need num_delta_pocs_of_ref_rps_idx value to parse slice header short_term_ref_pic_set(). Use one of the 4 reserved bytes to store this value without changing the v4l2_ctrl_hevc_decode_params structure size and padding. This value also exist in DXVA API. Signed-off-by: Benjamin Gaignard <[email protected]> Signed-off-by: Yunfei Dong <[email protected]> Reviewed-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [hverkuil: fix typo in num_delta_pocs_of_ref_rps_idx doc] Stable-dep-of: 297160d411e3 ("media: mediatek: vcodec: move core context from device to each instance") Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Wed Jun 14 20:31:05 2023 +0200 media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link() [ Upstream commit d7b13edd4cb4bfa335b6008ab867ac28582d3e5c ] If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos. Fixes: ca50c197bd96 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue May 30 14:30:35 2023 +0200 media: venus: hfi_venus: Only consider sys_idle_indicator on V1 [ Upstream commit 6283e4834c69fa93a108efa18c6aa09c7e626f49 ] As per information from Qualcomm [1], this property is not really supported beyond msm8916 (HFI V1) and some newer HFI versions really dislike receiving it, going as far as crashing the device. Only consider toggling it (via the module option) on HFIV1. While at it, get rid of the global static variable (which defaulted to zero) which was never explicitly assigned to for V1. Note: [1] is a reply to the actual message in question, as lore did not properly receive some of the emails.. [1] https://lore.kernel.org/lkml/[email protected]/ Fixes: 7ed9e0b3393c ("media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations") Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Dybcio <[email protected]> Date: Tue May 30 14:30:36 2023 +0200 media: venus: hfi_venus: Write to VIDC_CTRL_INIT after unmasking interrupts commit d74e481609808330b4625b3691cf01e1f56e255e upstream. The startup procedure shouldn't be started with interrupts masked, as that may entail silent failures. Kick off initialization only after the interrupts are unmasked. Cc: [email protected] # v4.12+ Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files") Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Stanimir Varbanov <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vadim Pasternak <[email protected]> Date: Thu Aug 24 15:43:10 2023 +0200 mlxsw: core_hwmon: Adjust module label names based on MTCAP sensor counter [ Upstream commit 3fc134a07438055fc93ce1bbacf2702ddd09500c ] Transceiver module temperature sensors are indexed after ASIC and platform sensors. The current label printing method does not take this into account and simply prints the index of the transceiver module sensor. On new systems that have platform sensors this results in incorrect (shifted) transceiver module labels being printed: $ sensors [...] front panel 002: +37.0°C (crit = +70.0°C, emerg = +75.0°C) front panel 003: +47.0°C (crit = +70.0°C, emerg = +75.0°C) [...] Fix by taking the sensor count into account. After the fix: $ sensors [...] front panel 001: +37.0°C (crit = +70.0°C, emerg = +75.0°C) front panel 002: +47.0°C (crit = +70.0°C, emerg = +75.0°C) [...] Fixes: a53779de6a0e ("mlxsw: core: Add QSFP module temperature label attribute to hwmon") Signed-off-by: Vadim Pasternak <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vadim Pasternak <[email protected]> Date: Thu Aug 24 15:43:08 2023 +0200 mlxsw: i2c: Fix chunk size setting in output mailbox buffer [ Upstream commit 146c7c330507c0384bf29d567186632bfe975927 ] The driver reads commands output from the output mailbox. If the size of the output mailbox is not a multiple of the transaction / block size, then the driver will not issue enough read transactions to read the entire output, which can result in driver initialization errors. Fix by determining the number of transactions using DIV_ROUND_UP(). Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size") Signed-off-by: Vadim Pasternak <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vadim Pasternak <[email protected]> Date: Thu Aug 24 15:43:09 2023 +0200 mlxsw: i2c: Limit single transaction buffer size [ Upstream commit d7248f1cc835bd80e936dc5b2d94b149bdd0077d ] Maximum size of buffer is obtained from underlying I2C adapter and in case adapter allows I2C transaction buffer size greater than 100 bytes, transaction will fail due to firmware limitation. As a result driver will fail initialization. Limit the maximum size of transaction buffer by 100 bytes to fit to firmware. Remove unnecessary calculation: max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size). This condition can not happened. Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size") Signed-off-by: Vadim Pasternak <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Joel Fernandes (Google) <[email protected]> Date: Mon Sep 4 18:08:04 2023 +0000 mm/vmalloc: add a safer version of find_vm_area() for debug commit 0818e739b5c061b0251c30152380600fb9b84c0c upstream. It is unsafe to dump vmalloc area information when trying to do so from some contexts. Add a safer trylock version of the same function to do a best-effort VMA finding and use it from vmalloc_dump_obj(). [applied test robot feedback on unused function fix.] [applied Uladzislau feedback on locking.] Link: https://lkml.kernel.org/r/[email protected] Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Joel Fernandes (Google) <[email protected]> Reviewed-by: Uladzislau Rezki (Sony) <[email protected]> Reported-by: Zhen Lei <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Zqiang <[email protected]> Cc: <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wolfram Sang <[email protected]> Date: Wed Jul 12 16:00:11 2023 +0200 mmc: renesas_sdhi: register irqs before registering controller commit 74f45de394d979cc7770271f92fafa53e1ed3119 upstream. IRQs should be ready to serve when we call mmc_add_host() via tmio_mmc_host_probe(). To achieve that, ensure that all irqs are masked before registering the handlers. Signed-off-by: Wolfram Sang <[email protected]> Tested-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: William Zhang <[email protected]> Date: Thu Jul 6 11:29:09 2023 -0700 mtd: rawnand: brcmnand: Fix mtd oobsize [ Upstream commit 60177390fa061c62d156f4a546e3efd90df3c183 ] brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: William Zhang <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Yi Yang <[email protected]> Date: Thu Aug 17 19:58:39 2023 +0800 mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume() [ Upstream commit a5a88125d00612586e941ae13e7fcf36ba8f18a7 ] In fsmc_nand_resume(), the return value of clk_prepare_enable() should be checked since it might fail. Fixes: e25da1c07dfb ("mtd: fsmc_nand: Add clk_{un}prepare() support") Signed-off-by: Yi Yang <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Hsin-Yi Wang <[email protected]> Date: Fri Aug 18 14:42:23 2023 +0800 mtd: spi-nor: Check bus width while setting QE bit [ Upstream commit f01d8155a92e33cdaa85d20bfbe6c441907b3c1f ] spi_nor_write_16bit_sr_and_check() should also check if bus width is 4 before setting QE bit. Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()") Suggested-by: Michael Walle <[email protected]> Suggested-by: Tudor Ambarus <[email protected]> Signed-off-by: Hsin-Yi Wang <[email protected]> Reviewed-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tudor Ambarus <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Abel Wu <[email protected]> Date: Mon Aug 14 15:09:11 2023 +0800 net-memcg: Fix scope of sockmem pressure indicators [ Upstream commit ac8a52962164a50e693fa021d3564d7745b83a7f ] Now there are two indicators of socket memory pressure sit inside struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating memory reclaim pressure in memcg->memory and ->tcpmem respectively. When in legacy mode (cgroupv1), the socket memory is charged into ->tcpmem which is independent of ->memory, so socket_pressure has nothing to do with socket's pressure at all. Things could be worse by taking socket_pressure into consideration in legacy mode, as a pressure in ->memory can lead to premature reclamation/throttling in socket. While for the default mode (cgroupv2), the socket memory is charged into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used. So {socket,tcpmem}_pressure are only used in default/legacy mode respectively for indicating socket memory pressure. This patch fixes the pieces of code that make mixed use of both. Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure") Signed-off-by: Abel Wu <[email protected]> Acked-by: Shakeel Butt <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:59 2023 +0300 net/mlx5: Use RMW accessors for changing LNKCTL [ Upstream commit 30de872537bda526664d7a20b646adfb3e7ce6e6 ] Don't assume that only the driver would be accessing LNKCTL of the upstream bridge. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. Suggested-by: Lukas Wunner <[email protected]> Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Budimir Markovic <[email protected]> Date: Thu Aug 24 01:49:05 2023 -0700 net/sched: sch_hfsc: Ensure inner classes have fsc curve [ Upstream commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f ] HFSC assumes that inner classes have an fsc curve, but it is currently possible for classes without an fsc curve to become parents. This leads to bugs including a use-after-free. Don't allow non-root classes without HFSC_FSC to become parents. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Budimir Markovic <[email protected]> Signed-off-by: Budimir Markovic <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Sat Aug 19 04:06:46 2023 +0000 net: annotate data-races around sk->sk_lingertime [ Upstream commit bc1fb82ae11753c5dec53c667a055dc37796dbd2 ] sk_getsockopt() runs locklessly. This means sk->sk_lingertime can be read while other threads are changing its value. Other reads also happen without socket lock being held, and must be annotated. Remove preprocessor logic using BITS_PER_LONG, compilers are smart enough to figure this by themselves. v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning (Jakub) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Fri Jul 28 15:03:12 2023 +0000 net: annotate data-races around sk->sk_{rcv|snd}timeo [ Upstream commit 285975dd674258ccb33e77a1803e8f2015e67105 ] sk_getsockopt() runs without locks, we must add annotations to sk->sk_rcvtimeo and sk->sk_sndtimeo. In the future we might allow fetching these fields before we lock the socket in TCP fast path. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jinjie Ruan <[email protected]> Date: Thu Aug 24 14:43:36 2023 +0800 net: arcnet: Do not call kfree_skb() under local_irq_disable() [ Upstream commit 786c96e92fb9e854cb8b0cb7399bb2fb28e15c4b ] It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under local_irq_disable(). Compile tested only. Fixes: 05fcd31cc472 ("arcnet: add err_skb package for package status feedback") Signed-off-by: Jinjie Ruan <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jordan Rife <[email protected]> Date: Mon Aug 21 16:45:23 2023 -0500 net: Avoid address overwrite in kernel_connect commit 0bdf399342c5acbd817c9098b6c7ed21f1974312 upstream. BPF programs that run on connect can rewrite the connect address. For the connect system call this isn't a problem, because a copy of the address is made when it is moved into kernel space. However, kernel_connect simply passes through the address it is given, so the caller may observe its address value unexpectedly change. A practical example where this is problematic is where NFS is combined with a system such as Cilium which implements BPF-based load balancing. A common pattern in software-defined storage systems is to have an NFS mount that connects to a persistent virtual IP which in turn maps to an ephemeral server IP. This is usually done to achieve high availability: if your server goes down you can quickly spin up a replacement and remap the virtual IP to that endpoint. With BPF-based load balancing, mounts will forget the virtual IP address when the address rewrite occurs because a pointer to the only copy of that address is passed down the stack. Server failover then breaks, because clients have forgotten the virtual IP address. Reconnects fail and mounts remain broken. This patch was tested by setting up a scenario like this and ensuring that NFS reconnects worked after applying the patch. Signed-off-by: Jordan Rife <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lukasz Majewski <[email protected]> Date: Thu Jul 27 10:13:42 2023 +0200 net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundaries [ Upstream commit 8d7ae22ae9f8c8a4407f8e993df64440bdbd0cee ] The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nicolas Dichtel <[email protected]> Date: Wed Aug 23 15:41:02 2023 +0200 net: handle ARPHRD_PPP in dev_is_mac_header_xmit() commit a4f39c9f14a634e4cd35fcd338c239d11fcc73fc upstream. The goal is to support a bpf_redirect() from an ethernet device (ingress) to a ppp device (egress). The l2 header is added automatically by the ppp driver, thus the ethernet header should be removed. CC: [email protected] Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <[email protected]> Tested-by: Siwar Zitouni <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jian Shen <[email protected]> Date: Mon Aug 7 19:34:49 2023 +0800 net: hns3: restore user pause configure when disable autoneg [ Upstream commit 15159ec0c831b565820c2de05114ea1b4cf07681 ] Restore the mac pause state to user configuration when autoneg is disabled Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Peiyang Wang <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Josua Mayer <[email protected]> Date: Fri Aug 18 13:05:56 2023 +0200 net: sfp: handle 100G/25G active optical cables in sfp_parse_support [ Upstream commit db1a6ad77c180efc7242d7204b9a0c72c8a5a1bb ] Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC) for active optical cables supporting 25G and 100G speeds. Since the specification makes no statement about transmitter range, and as the specific sfp module that had been tested features only 2m fiber - short-range (SR) modes are selected. The 100G speed is irrelevant because it would require multiple fibers / multiple SFP28 modules combined under one netdev. sfp-bus.c only handles a single module per netdev, so only 25Gbps modes are selected. sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR with compatible properties, however that entry is a contradiction in itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely be a mode for qsfp modules only. Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r interface mode and 25000baseSR link mode. Also enforce SFP28 bitrate limits on the values read from sfp eeprom as requested by Russell King. Tested with fs.com S28-AO02 AOC SFP28 module. Signed-off-by: Josua Mayer <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Menglong Dong <[email protected]> Date: Fri Aug 11 10:55:29 2023 +0800 net: tcp: fix unexcepted socket die when snd_wnd is 0 [ Upstream commit e89688e3e97868451a5d05b38a9d2633d6785cd4 ] In tcp_retransmit_timer(), a window shrunk connection will be regarded as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not right all the time. The retransmits will become zero-window probes in tcp_retransmit_timer() if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to TCP_RTO_MAX sooner or later. However, the timer can be delayed and be triggered after 122877ms, not TCP_RTO_MAX, as I tested. Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true once the RTO come up to TCP_RTO_MAX, and the socket will die. Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout', which is exact the timestamp of the timeout. However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp could already be a long time (minutes or hours) in the past even on the first RTO. So we double check the timeout with the duration of the retransmission. Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket dying too soon. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/netdev/CADxym3YyMiO+zMD4zj03YPM3FBi-1LHi6gSD2XT8pyAMM096pg@mail.gmail.com/ Signed-off-by: Menglong Dong <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Martin Kohn <[email protected]> Date: Thu Jul 27 20:00:43 2023 +0000 net: usb: qmi_wwan: add Quectel EM05GV2 [ Upstream commit d4480c9bb9258db9ddf2e632f6ef81e96b41089c ] Add support for Quectel EM05GV2 (G=global) with vendor ID 0x2c7c and product ID 0x030e Enabling DTR on this modem was necessary to ensure stable operation. Patch for usb: serial: option: is also in progress. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030e Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Martin Kohn <[email protected]> Link: https://lore.kernel.org/r/AM0PR04MB57648219DE893EE04FA6CC759701A@AM0PR04MB5764.eurprd04.prod.outlook.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kyle Zeng <[email protected]> Date: Tue Sep 5 15:04:09 2023 -0700 netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c commit 050d91c03b28ca479df13dfb02bcd2c60dd6a878 upstream. The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue. Fixes: 886503f34d63 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net") Suggested-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Kyle Zeng <[email protected]> Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xiao Liang <[email protected]> Date: Fri Aug 25 13:33:27 2023 +0800 netfilter: nft_exthdr: Fix non-linear header modification commit 28427f368f0e08d504ed06e74bc7cc79d6d06511 upstream. Fix skb_ensure_writable() size. Don't use nft_tcp_header_pointer() to make it explicit that pointers point to the packet (not local buffer). Fixes: 99d1712bc41c ("netfilter: exthdr: tcp option set support") Fixes: 7890cbea66e7 ("netfilter: exthdr: add support for tcp option removal") Cc: [email protected] Signed-off-by: Xiao Liang <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wander Lairson Costa <[email protected]> Date: Mon Aug 28 19:12:55 2023 -0300 netfilter: xt_sctp: validate the flag_info count commit e99476497687ef9e850748fe6d232264f30bc8f9 upstream. sctp_mt_check doesn't validate the flag_count field. An attacker can take advantage of that to trigger a OOB read and leak memory information. Add the field validation in the checkentry function. Fixes: 2e4e6a17af35 ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables") Cc: [email protected] Reported-by: Lucas Leong <[email protected]> Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wander Lairson Costa <[email protected]> Date: Mon Aug 28 10:21:07 2023 -0300 netfilter: xt_u32: validate user space input commit 69c5d284f67089b4750d28ff6ac6f52ec224b330 upstream. The xt_u32 module doesn't validate the fields in the xt_u32 structure. An attacker may take advantage of this to trigger an OOB read by setting the size fields with a value beyond the arrays boundaries. Add a checkentry function to validate the structure. This was originally reported by the ZDI project (ZDI-CAN-18408). Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match") Cc: [email protected] Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dmitry Mastykin <[email protected]> Date: Thu Jun 8 16:57:54 2023 +0300 netlabel: fix shift wrapping bug in netlbl_catmap_setlong() [ Upstream commit b403643d154d15176b060b82f7fc605210033edd ] There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted. Signed-off-by: Dmitry Mastykin <[email protected]> Acked-by: Paul Moore <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Thu Aug 24 09:50:59 2023 -0700 netrom: Deny concurrent connect(). [ Upstream commit c2f8fd7949603efb03908e05abbf7726748c8de3 ] syzkaller reported null-ptr-deref [0] related to AF_NETROM. This is another self-accept issue from the strace log. [1] syz-executor creates an AF_NETROM socket and calls connect(), which is blocked at that time. Then, sk->sk_state is TCP_SYN_SENT and sock->state is SS_CONNECTING. [pid 5059] socket(AF_NETROM, SOCK_SEQPACKET, 0) = 4 [pid 5059] connect(4, {sa_family=AF_NETROM, sa_data="..." <unfinished ...> Another thread calls connect() concurrently, which finally fails with -EINVAL. However, the problem here is the socket state is reset even while the first connect() is blocked. [pid 5060] connect(4, NULL, 0 <unfinished ...> [pid 5060] <... connect resumed>) = -1 EINVAL (Invalid argument) As sk->state is TCP_CLOSE and sock->state is SS_UNCONNECTED, the following listen() succeeds. Then, the first connect() looks up itself as a listener and puts skb into the queue with skb->sk itself. As a result, the next accept() gets another FD of itself as 3, and the first connect() finishes. [pid 5060] listen(4, 0 <unfinished ...> [pid 5060] <... listen resumed>) = 0 [pid 5060] accept(4, NULL, NULL <unfinished ...> [pid 5060] <... accept resumed>) = 3 [pid 5059] <... connect resumed>) = 0 Then, accept4() is called but blocked, which causes the general protection fault later. [pid 5059] accept4(4, NULL, 0x20000400, SOCK_NONBLOCK <unfinished ...> After that, another self-accept occurs by accept() and writev(). [pid 5060] accept(4, NULL, NULL <unfinished ...> [pid 5061] writev(3, [{iov_base=...}] <unfinished ...> [pid 5061] <... writev resumed>) = 99 [pid 5060] <... accept resumed>) = 6 Finally, the leader thread close()s all FDs. Since the three FDs reference the same socket, nr_release() does the cleanup for it three times, and the remaining accept4() causes the following fault. [pid 5058] close(3) = 0 [pid 5058] close(4) = 0 [pid 5058] close(5) = -1 EBADF (Bad file descriptor) [pid 5058] close(6) = 0 [pid 5058] <... exit_group resumed>) = ? [ 83.456055][ T5059] general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN To avoid the issue, we need to return an error for connect() if another connect() is in progress, as done in __inet_stream_connect(). [0]: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 5059 Comm: syz-executor.0 Not tainted 6.5.0-rc5-syzkaller-00194-gace0ab3a4b54 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5012 Code: 45 85 c9 0f 84 cc 0e 00 00 44 8b 05 11 6e 23 0b 45 85 c0 0f 84 be 0d 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 d1 48 c1 e9 03 <80> 3c 11 00 0f 85 e8 40 00 00 49 81 3a a0 69 48 90 0f 84 96 0d 00 RSP: 0018:ffffc90003d6f9e0 EFLAGS: 00010006 RAX: ffff8880244c8000 RBX: 1ffff920007adf6c RCX: 0000000000000003 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000018 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000018 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f51d519a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f51d5158d58 CR3: 000000002943f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5761 [inline] lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x50 kernel/locking/spinlock.c:162 prepare_to_wait+0x47/0x380 kernel/sched/wait.c:269 nr_accept+0x20d/0x650 net/netrom/af_netrom.c:798 do_accept+0x3a6/0x570 net/socket.c:1872 __sys_accept4_file net/socket.c:1913 [inline] __sys_accept4+0x99/0x120 net/socket.c:1943 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x96/0x100 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f51d447cae9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f51d519a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000120 RAX: ffffffffffffffda RBX: 00007f51d459bf80 RCX: 00007f51d447cae9 RDX: 0000000020000400 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007f51d44c847a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000800 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f51d459bf80 R15: 00007ffc25c34e48 </TASK> Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=152cdb63a80000 [1] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=666c97e4686410e79649 Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Mon Jul 24 11:08:46 2023 +0300 nfs/blocklayout: Use the passed in gfp flags [ Upstream commit 08b45fcb2d4675f6182fe0edc0d8b1fe604051fa ] This allocation should use the passed in GFP_ flags instead of GFP_KERNEL. One places where this matters is in filelayout_pg_init_write() which uses GFP_NOFS as the allocation flags. Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Coddington <[email protected]> Date: Tue Aug 22 14:22:38 2023 -0400 NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN [ Upstream commit f67b55b6588bcf9316a1e6e8d529100a5aa3ebe6 ] Commit 64cfca85bacd asserts the only valid return values for nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the client's behavior will be to endlessly retry the operation. We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce truncated listings without any error. The client should return an error for this case to clearly assert that the server implementation must be corrected. Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()") Signed-off-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chuck Lever <[email protected]> Date: Wed Aug 16 10:20:52 2023 -0400 NFSD: da_addr_body field missing in some GETDEVICEINFO replies [ Upstream commit 6372e2ee629894433fe6107d7048536a3280a284 ] The XDR specification in RFC 8881 looks like this: struct device_addr4 { layouttype4 da_layout_type; opaque da_addr_body<>; }; struct GETDEVICEINFO4resok { device_addr4 gdir_device_addr; bitmap4 gdir_notification; }; union GETDEVICEINFO4res switch (nfsstat4 gdir_status) { case NFS4_OK: GETDEVICEINFO4resok gdir_resok4; case NFS4ERR_TOOSMALL: count4 gdir_mincount; default: void; }; Looking at nfsd4_encode_getdeviceinfo() .... When the client provides a zero gd_maxcount, then the Linux NFS server implementation encodes the da_layout_type field and then skips the da_addr_body field completely, proceeding directly to encode gdir_notification field. There does not appear to be an option in the specification to skip encoding da_addr_body. Moreover, Section 18.40.3 says: > If the client wants to just update or turn off notifications, it > MAY send a GETDEVICEINFO operation with gdia_maxcount set to zero. > In that event, if the device ID is valid, the reply's da_addr_body > field of the gdir_device_addr field will be of zero length. Since the layout drivers are responsible for encoding the da_addr_body field, put this fix inside the ->encode_getdeviceinfo methods. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Reviewed-by: Christoph Hellwig <[email protected]> Cc: Tom Haynes <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Tue May 16 11:19:25 2023 -0400 NFSv4.2: Fix a potential double free with READ_PLUS commit 43439d858bbae244a510de47f9a55f667ca4ed52 upstream. kfree()-ing the scratch page isn't enough, we also need to set the pointer back to NULL to avoid a double-free in the case of a resend. Fixes: fbd2a05f29a9 (NFSv4.2: Rework scratch handling for READ_PLUS) Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Olga Kornievskaia <[email protected]> Date: Thu Aug 24 16:43:53 2023 -0400 NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ [ Upstream commit 5690eed941ab7e33c3c3d6b850100cabf740f075 ] If the client sent a synchronous copy and the server replied with ERR_OFFLOAD_NO_REQ indicating that it wants an asynchronous copy instead, the client should retry with asynchronous copy. Fixes: 539f57b3e0fd ("NFS handle COPY ERR_OFFLOAD_NO_REQS") Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Wed May 31 17:02:54 2023 -0400 NFSv4.2: Fix READ_PLUS size calculations [ Upstream commit 8d18f6c5bb864d97a730f471c56cdecf313efe64 ] I bump the decode_read_plus_maxsz to account for hole segments, but I need to subtract out this increase when calling rpc_prepare_reply_pages() so the common case of single data segment replies can be directly placed into the xdr pages without needing to be shifted around. Reported-by: Chuck Lever <[email protected]> Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code") Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Wed May 24 17:27:08 2023 -0400 NFSv4.2: Fix READ_PLUS smatch warnings [ Upstream commit bb05a617f06b7a882e19c4f475b8e37f14d9ceac ] Smatch reports: fs/nfs/nfs42xdr.c:1131 decode_read_plus() warn: missing error code? 'status' Which Dan suggests to fix by doing a hardcoded "return 0" from the "if (segments == 0)" check. Additionally, smatch reports that the "status = -EIO" assignment is not used. This patch addresses both these issues. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code") Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Wed Nov 30 13:15:26 2022 -0500 NFSv4.2: Fix up READ_PLUS alignment [ Upstream commit f8527028a7e52da884055c401abc04e0b0c84285 ] Assume that the first segment will be a DATA segment, and place the data directly into the xdr pages so it doesn't need to be shifted. Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> Stable-dep-of: 8d18f6c5bb86 ("NFSv4.2: Fix READ_PLUS size calculations") Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Thu Apr 6 15:16:52 2023 -0400 NFSv4.2: Rework scratch handling for READ_PLUS [ Upstream commit fbd2a05f29a95d5b42b294bf47e55a711424965b ] Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed buffer that is allocated when checking for read plus usage. This lets us use the buffer before decoding any part of the READ_PLUS operation instead of setting it right before segment decoding, meaning it should be a little more robust. Signed-off-by: Anna Schumaker <[email protected]> Stable-dep-of: bb05a617f06b ("NFSv4.2: Fix READ_PLUS smatch warnings") Signed-off-by: Sasha Levin <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Fri Jun 9 15:26:25 2023 -0400 NFSv4.2: Rework scratch handling for READ_PLUS (again) commit 303a78052091c81e9003915c521fdca1c7e117af upstream. I found that the read code might send multiple requests using the same nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is how we ended up occasionally double-freeing the scratch buffer, but also means we set a NULL pointer but non-zero length to the xdr scratch buffer. This results in an oops the first time decoding needs to copy something to scratch, which frequently happens when decoding READ_PLUS hole segments. I fix this by moving scratch handling into the pageio read code. I provide a function to allocate scratch space for decoding read replies, and free the scratch buffer when the nfs_pgio_header is freed. Fixes: fbd2a05f29a9 (NFSv4.2: Rework scratch handling for READ_PLUS) Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Jiang <[email protected]> Date: Tue Aug 22 09:04:45 2023 -0700 ntb: Clean up tx tail index on link down commit cc79bd2738c2d40aba58b2be6ce47dc0e471df0e upstream. The tx tail index is not reset when the link goes down. This causes the tail index to go out of sync when the link goes down and comes back up. Refactor the ntb_qp_link_down_reset() and reset the tail index as well. Fixes: 2849b5d70641 ("NTB: Reset transport QP link stats on down") Reported-by: Yuan Y Lu <[email protected]> Tested-by: Yuan Y Lu <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Jiang <[email protected]> Date: Tue Aug 22 09:04:51 2023 -0700 ntb: Drop packets when qp link is down commit f195a1a6fe416882984f8bd6c61afc1383171860 upstream. Currently when the transport receive packets after netdev has closed the transport returns error and triggers tx errors to be incremented and carrier to be stopped. There is no reason to return error if the device is already closed. Drop the packet and return 0. Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Reported-by: Yuan Y Lu <[email protected]> Tested-by: Yuan Y Lu <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Jiang <[email protected]> Date: Tue Aug 22 09:04:57 2023 -0700 ntb: Fix calculation ntb_transport_tx_free_entry() commit 5a7693e6bbf19b22fd6c1d2c4b7beb0a03969e2c upstream. ntb_transport_tx_free_entry() never returns 0 with the current calculation. If head == tail, then it would return qp->tx_max_entry. Change compare to tail >= head and when they are equal, a 0 would be returned. Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev") Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: renlonglong <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Jon Mason <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Konstantin Meskhidze <[email protected]> Date: Thu Aug 17 19:41:03 2023 +0800 nvdimm: Fix dereference after free in register_nvdimm_pmu() [ Upstream commit 08ca6906a4b7e48f8e93b7c1f49a742a415be6d5 ] 'nd_pmu->pmu.attr_groups' is dereferenced in function 'nvdimm_pmu_free_hotplug_memory' call after it has been freed. Because in function 'nvdimm_pmu_free_hotplug_memory' memory pointed by the fields of 'nd_pmu->pmu.attr_groups' is deallocated it is necessary to call 'kfree' after 'nvdimm_pmu_free_hotplug_memory'. Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats") Co-developed-by: Ivanov Mikhail <[email protected]> Signed-off-by: Konstantin Meskhidze <[email protected]> Reviewed-by: Jeff Moyer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konstantin Meskhidze <[email protected]> Date: Thu Aug 17 19:59:45 2023 +0800 nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu() [ Upstream commit 85ae42c72142346645e63c33835da947dfa008b3 ] Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function 'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function 'unregister_nvdimm_pmu'. Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats") Co-developed-by: Ivanov Mikhail <[email protected]> Signed-off-by: Konstantin Meskhidze <[email protected]> Reviewed-by: Jeff Moyer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Suman Ghosh <[email protected]> Date: Thu Aug 24 13:40:30 2023 +0530 octeontx2-pf: Fix PFC TX scheduler free [ Upstream commit a9ac2e18779597f280d68a5b5f5bdd51a34080fa ] During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set which caused free up all schedulers other than the PFC schedulers. This patch fixes that to free only the PFC Tx schedulers. Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support") Signed-off-by: Suman Ghosh <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hariprasad Kelam <[email protected]> Date: Sat May 13 14:21:39 2023 +0530 octeontx2-pf: Refactor schedular queue alloc/free calls [ Upstream commit 6b4b2ded9c4282deea421eef144ab0ced954721c ] 1. Upon txschq free request, the transmit schedular config in hardware is not getting reset. This patch adds necessary changes to do the same. 2. Current implementation calls txschq alloc during interface initialization and in response handler updates the default txschq array. This creates a problem for htb offload where txsch alloc will be called for every tc class. This patch addresses the issue by reading txschq response in mbox caller function instead in the response handler. 3. Current otx2_txschq_stop routine tries to free all txschq nodes allocated to the interface. This creates a problem for htb offload. This patch introduces the otx2_txschq_free_one to free txschq in a given level. Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Naveen Mamindlapalli <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: a9ac2e187795 ("octeontx2-pf: Fix PFC TX scheduler free") Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Fri Jul 28 10:50:28 2023 +0200 of: overlay: Call of_changeset_init() early [ Upstream commit a9515ff4fb142b690a0d2b58782b15903b990dba ] When of_overlay_fdt_apply() fails, the changeset may be partially applied, and the caller is still expected to call of_overlay_remove() to clean up this partial state. However, of_overlay_apply() calls of_resolve_phandles() before init_overlay_changeset(). Hence if the overlay fails to apply due to an unresolved symbol, the overlay_changeset.cset.entries list is still uninitialized, and cleanup will crash with a NULL-pointer dereference in overlay_removal_is_ok(). Fix this by moving the call to of_changeset_init() from init_overlay_changeset() to of_overlay_fdt_apply(), where all other early initialization is done. Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Douglas Anderson <[email protected]> Date: Thu Jul 27 10:16:31 2023 -0700 of: property: fw_devlink: Add a devlink for panel followers commit fbf0ea2da3c7cd0b33ed7ae53a67ab1c24838cba upstream. Inform fw_devlink of the fact that a panel follower (like a touchscreen) is effectively a consumer of the panel from the purposes of fw_devlink. NOTE: this patch isn't required for correctness but instead optimizes probe order / helps avoid deferrals. Acked-by: Rob Herring <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.4.Ibf8e1342b5b7906279db2365aca45e6253857bb3@changeid Cc: Adam Ford <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Saravana Kannan <[email protected]> Date: Mon Feb 6 17:42:01 2023 -0800 of: property: Simplify of_link_to_phandle() commit 4a032827daa89350365166b19d14d82fe8219128 upstream. The driver core now: - Has the parent device of a supplier pick up the consumers if the supplier never has a device created for it. - Ignores a supplier if the supplier has no parent device and will never be probed by a driver And already prevents creating a device link with the consumer as a supplier of a parent. So, we no longer need to find the "compatible" node of the supplier or do any other checks in of_link_to_phandle(). We simply need to make sure that the supplier is available in DT. Signed-off-by: Saravana Kannan <[email protected]> Tested-by: Colin Foster <[email protected]> Tested-by: Sudeep Holla <[email protected]> Tested-by: Douglas Anderson <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Tested-by: Luca Weiss <[email protected]> # qcom/sm7225-fairphone-fp4 Link: https://lore.kernel.org/r/[email protected] Fixes: eaf9b5612a47 ("driver core: fw_devlink: Don't purge child fwnode's consumer links") Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ruan Jinjie <[email protected]> Date: Thu Jul 27 16:02:46 2023 +0800 of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name() [ Upstream commit d6ce4f0ea19c32f10867ed93d8386924326ab474 ] when kmalloc() fail to allocate memory in kasprintf(), name or full_name will be NULL, strcmp() will cause null pointer dereference. Fixes: 0d638a07d3a1 ("of: Convert to using %pOF instead of full_name") Signed-off-by: Ruan Jinjie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Fri Jul 28 10:50:29 2023 +0200 of: unittest: Fix overlay type in apply/revert check [ Upstream commit 6becf8f845ae1f0b1cfed395bbeccbd23654162d ] The removal check in of_unittest_apply_revert_overlay_check() always uses the platform device overlay type, while it should use the actual overlay type, as passed as a parameter to the function. This has no impact on any current test, as all tests calling of_unittest_apply_revert_overlay_check() use the platform device overlay type. Fixes: d5e75500ca401d31 ("of: unitest: Add I2C overlay unit tests.") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/ba0234c41ba808f10112094f88792beeb6dbaedf.1690533838.git.geert+renesas@glider.be Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Fri Jul 21 18:16:34 2023 +0530 OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd() [ Upstream commit d920920f85a82c1c806a4143871a0e8f534732f2 ] If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to PTR_ERR() as reported by the smatch warning below: drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR' Fix it by checking for the non-NULL virt_dev pointer before passing it to PTR_ERR. Otherwise return -ENODEV. Fixes: 4ea9496cbc95 ("opp: Fix error check in dev_pm_opp_attach_genpd()") Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Snowberg <[email protected]> Date: Tue Jul 25 17:56:46 2023 -0400 ovl: Always reevaluate the file signature for IMA [ Upstream commit 18b44bc5a67275641fb26f2c54ba7eef80ac5950 ] Commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version") partially closed an IMA integrity issue when directly modifying a file on the lower filesystem. If the overlay file is first opened by a user and later the lower backing file is modified by root, but the extended attribute is NOT updated, the signature validation succeeds with the old original signature. Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to force signature reevaluation on every file access until a fine grained solution can be found. Signed-off-by: Eric Snowberg <[email protected]> Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Helge Deller <[email protected]> Date: Fri Aug 18 22:48:04 2023 +0200 parisc: Fix /proc/cpuinfo output for lscpu commit 9f5ba4b3e1b3c123eeca5d2d09161e8720048b5c upstream. The lscpu command is broken since commit cab56b51ec0e ("parisc: Fix device names in /proc/iomem") added the PA pathname to all PA devices, includig the CPUs. lscpu parses /proc/cpuinfo and now believes it found different CPU types since every CPU is listed with an unique identifier (PA pathname). Fix this problem by simply dropping the PA pathname when listing the CPUs in /proc/cpuinfo. There is no need to show the pathname in this procfs file. Fixes: cab56b51ec0e ("parisc: Fix device names in /proc/iomem") Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # v4.9+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Daniel Miess <[email protected]> Date: Wed May 31 11:47:35 2023 -0400 Partially revert "drm/amd/display: Fix possible underflow for displays with large vblank" [ Upstream commit a99a4ff6ef205d125002fc7e0857074e4e6597b6 ] This partially reverts commit de231189e7bf ("drm/amd/display: Fix possible underflow for displays with large vblank"). [Why] The increased value of VBlankNomDefaultUS causes underflow at the desktop of an IP KVM setup [How] Change the value from 800 back to 668 Reviewed-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:56 2023 +0300 PCI/ASPM: Use RMW accessors for changing LNKCTL [ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ] Don't assume that the device is fully under the control of ASPM and use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register values. If configuration fails in pcie_aspm_configure_common_clock(), the function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather than the content of the whole LNKCTL registers. It aligns better with how pcie_lnkctl_clear_and_set() expects its parameter and makes the code more obvious to understand. Suggested-by: Lukas Wunner <[email protected]> Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ira Weiny <[email protected]> Date: Wed Jul 26 11:29:42 2023 -0700 PCI/DOE: Fix destroy_work_on_stack() race [ Upstream commit e3a3a097eaebaf234a482b4d2f9f18fe989208c1 ] The following debug object splat was observed in testing: ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510 WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0 ... Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: ? debug_print_object+0x7d/0xb0 ? __pfx_doe_statemachine_work+0x10/0x10 debug_object_free.part.0+0x11b/0x150 doe_statemachine_work+0x45e/0x510 process_one_work+0x1d4/0x3c0 This occurs because destroy_work_on_stack() was called after signaling the completion in the calling thread. This creates a race between destroy_work_on_stack() and the task->work struct going out of scope in pci_doe(). Signal the work complete after destroying the work struct. This is safe because signal_task_complete() is the final thing the work item does and the workqueue code is careful not to access the work struct after. Fixes: abf04be0e707 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ira Weiny <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Lukas Wunner <[email protected]> Acked-by: Dan Williams <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Feiyang Chen <[email protected]> Date: Thu Aug 24 09:37:38 2023 +0800 PCI/PM: Only read PCI_PM_CTRL register when available commit 5694ba13b004eea683c6d4faeb6d6e7a9636bda0 upstream. For a device with no Power Management Capability, pci_power_up() previously returned 0 (success) if the platform was able to put the device in D0, which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even though it doesn't exist. Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted dev->current_state. This led to messages like this in some cases: pci 0000:01:00.0: Refused to change power state from D3hot to D0 To prevent this, make pci_power_up() always return a negative failure code if the device lacks a Power Management Capability, even if non-PCI platform power management has been able to put the device in D0. The failure will prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL. Fixes: e200904b275c ("PCI/PM: Split pci_power_up()") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Feiyang Chen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: "Rafael J. Wysocki" <[email protected]> Cc: [email protected] # v5.19+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:53 2023 +0300 PCI: Add locking to RMW PCI Express Capability Register accessors [ Upstream commit 5e70d0acf0825f439079736080350371f8d6699a ] Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <[email protected]> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ira Weiny <[email protected]> Date: Mon Sep 26 14:57:10 2022 -0700 PCI: Allow drivers to request exclusive config regions [ Upstream commit 278294798ac9118412c9624a801d3f20f2279363 ] PCI config space access from user space has traditionally been unrestricted with writes being an understood risk for device operation. Unfortunately, device breakage or odd behavior from config writes lacks indicators that can leave driver writers confused when evaluating failures. This is especially true with the new PCIe Data Object Exchange (DOE) mailbox protocol where backdoor shenanigans from user space through things such as vendor defined protocols may affect device operation without complete breakage. A prior proposal restricted read and writes completely.[1] Greg and Bjorn pointed out that proposal is flawed for a couple of reasons. First, lspci should always be allowed and should not interfere with any device operation. Second, setpci is a valuable tool that is sometimes necessary and it should not be completely restricted.[2] Finally methods exist for full lock of device access if required. Even though access should not be restricted it would be nice for driver writers to be able to flag critical parts of the config space such that interference from user space can be detected. Introduce pci_request_config_region_exclusive() to mark exclusive config regions. Such regions trigger a warning and kernel taint if accessed via user space. Create pci_warn_once() to restrict the user from spamming the log. [1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/ [2] https://lore.kernel.org/all/[email protected]/ Cc: Bjorn Helgaas <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Suggested-by: Dan Williams <[email protected]> Signed-off-by: Ira Weiny <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dan Williams <[email protected]> Stable-dep-of: 5e70d0acf082 ("PCI: Add locking to RMW PCI Express Capability Register accessors") Signed-off-by: Sasha Levin <[email protected]>
Author: Sven Peter <[email protected]> Date: Sat Mar 11 14:34:53 2023 +0100 PCI: apple: Initialize pcie->nvecs before use [ Upstream commit d8650c0c2aa2e413594e4cb0faafa9958c1d7782 ] The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set up the number of MSIs available for each port. However, it's called before apple_msi_init(), which initializes pcie->nvecs. Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such, initialized as zero. ilog2(0) happens to be 0xffffffff which then simply configures more MSIs in hardware than we have. This doesn't break anything because we never hand out those vectors. Thus, swap the order of the two calls so that the correctly initialized value is then used. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/[email protected] Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support") Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Alyssa Rosenzweig <[email protected]> Reviewed-by: Eric Curtin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ross Lagerwall <[email protected]> Date: Wed Sep 6 12:08:46 2023 +0100 PCI: Free released resource after coalescing commit 8ec9c1d5d0a5a4744516adb483b97a238892f9d5 upstream. release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. Closes: https://lore.kernel.org/r/[email protected]/ Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing") Link: https://lore.kernel.org/r/[email protected] Reported-by: Kalle Valo <[email protected]> Tested-by: Kalle Valo <[email protected]> Signed-off-by: Ross Lagerwall <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: [email protected] # v5.16+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dexuan Cui <[email protected]> Date: Wed Aug 16 10:59:39 2023 -0700 PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation commit 04bbe863241a9be7d57fb4cf217ee4a72f480e70 upstream. When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. Link: https://lore.kernel.org/r/[email protected] Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling") Signed-off-by: Dexuan Cui <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: [email protected] Reviewed-by: Michael Kelley <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wu Zongyong <[email protected]> Date: Mon Apr 10 20:34:11 2023 +0800 PCI: Mark NVIDIA T4 GPUs to avoid bus reset [ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ] NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs PCI_DEV_FLAGS_NO_BUS_RESET. Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset") Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daire McNamara <[email protected]> Date: Fri Jul 28 14:13:55 2023 +0100 PCI: microchip: Correct the DED and SEC interrupt bit offsets [ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ] The SEC and DED interrupt bits are laid out the wrong way round so the SEC interrupt handler attempts to mask, unmask, and clear the DED interrupt and vice versa. Correct the bit offsets so that each interrupt handler operates properly. Link: https://lore.kernel.org/r/[email protected] Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:04:55 2023 +0300 PCI: pciehp: Use RMW accessors for changing LNKCTL [ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ] As hotplug is not the only driver touching LNKCTL, use the RMW capability accessor which handles concurrent changes correctly. Suggested-by: Lukas Wunner <[email protected]> Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: "Rafael J. Wysocki" <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Manivannan Sadhasivam <[email protected]> Date: Tue Jun 27 19:40:36 2023 +0530 PCI: qcom-ep: Switch MHI bus master clock off during L1SS [ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ] Currently, as part of the qcom_pcie_perst_deassert() function, instead of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable "val" is re-read. This must be fixed to ensure that the master clock supplied to the MHI bus is correctly gated during L1.1/L1.2 to save power. Thus, replace the line that re-reads "val" with a line that writes the updated value to the register to clear PARF_MSTR_AXI_CLK_EN. [kwilczynski: commit log] Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS") Link: https://lore.kernel.org/linux-pci/[email protected] Reported-by: Krzysztof Wilczyński <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Rick Wertenbroek <[email protected]> Date: Mon Jul 3 10:58:45 2023 +0200 PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream. A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs. This would result in the upper 32 bits being unintentionally zeroed and MSIs getting mapped to incorrect PCI addresses if the address had any of the upper bits set. Replace 32-bit mask by appropriate 64-bit mask. [kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/[email protected] Link: https://lore.kernel.org/linux-pci/[email protected] Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Rick Wertenbroek <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Xu Yang <[email protected]> Date: Fri Aug 11 09:54:38 2023 +0800 perf/imx_ddr: don't enable counter0 if none of 4 counters are used [ Upstream commit f4e2bd91ddf5e8543cbe7ad80b3fba3d2dc63fa3 ] In current driver, counter0 will be enabled after ddr_perf_pmu_enable() is called even though none of the 4 counters are used. This will cause counter0 continue to count until ddr_perf_pmu_disabled() is called. If pmu is not disabled all the time, the pmu interrupt will be asserted from time to time due to counter0 will overflow and irq handler will clear it. It's not an expected behavior. This patch will not enable counter0 if none of 4 counters are used. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Signed-off-by: Xu Yang <[email protected]> Reviewed-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kan Liang <[email protected]> Date: Tue Sep 5 06:42:48 2023 -0700 perf/x86/uncore: Correct the number of CHAs on EMR commit 6f7f984fa85b305799076a1bcec941b9377587de upstream. Starting from SPR, the basic uncore PMON information is retrieved from the discovery table (resides in an MMIO space populated by BIOS). It is called the discovery method. The existing value of the type->num_boxes is from the discovery table. On some SPR variants, there is a firmware bug that makes the value from the discovery table incorrect. We use the value from the SPR_MSR_UNC_CBO_CONFIG MSR to replace the one from the discovery table: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR") Unfortunately, the SPR_MSR_UNC_CBO_CONFIG isn't available for the EMR XCC (Always returns 0), but the above firmware bug doesn't impact the EMR XCC. Don't let the value from the MSR replace the existing value from the discovery table. Fixes: 38776cc45eb7 ("perf/x86/uncore: Correct the number of CHAs on SPR") Reported-by: Stephane Eranian <[email protected]> Reported-by: Yunying Sun <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Yunying Sun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jonas Karlman <[email protected]> Date: Thu Jun 15 17:10:21 2023 +0000 phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write [ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ] inno_write is used to configure 0xaa reg, that also hold the POST_PLL_POWER_DOWN bit. When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not taken into consideration. Fix this by keeping the power down bit until configuration is complete. Also reorder the reg write order for consistency. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zheng Yang <[email protected]> Date: Thu Jun 15 17:10:19 2023 +0000 phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate [ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ] inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found in the pre pll config table when the fractal divider is used. This can prevent proper power_on because a tmdsclock for the new rate is not found in the pre pll config table. Fix this by saving and returning a rounded pixel rate that exist in the pre pll config table. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Zheng Yang <[email protected]> Signed-off-by: Jonas Karlman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jonas Karlman <[email protected]> Date: Thu Jun 15 17:10:17 2023 +0000 phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 [ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ] inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro when configuring vco_div_5 on RK3328. Fix this by using correct vco_div_5 macro for RK3328. Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy") Signed-off-by: Jonas Karlman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Adrien Thierry <[email protected]> Date: Thu Jun 29 10:45:40 2023 -0400 phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code [ Upstream commit 8932089b566c24ea19b57e37704c492678de1420 ] The return value from qcom_snps_hsphy_suspend/resume is not used. Make sure qcom_snps_hsphy_runtime_suspend/resume return this value as well. Signed-off-by: Adrien Thierry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Claudiu Beznea <[email protected]> Date: Wed Jun 21 13:04:09 2023 +0300 pinctrl: mcp23s08: check return value of devm_kasprintf() [ Upstream commit f941714a7c7698eadb59bc27d34d6d6f38982705 ] devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 0f04a81784fe ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI") Signed-off-by: Claudiu Beznea <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tzung-Bi Shih <[email protected]> Date: Thu Aug 3 09:12:45 2023 +0800 platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER commit 0820debb7d489e9eb1f68b7bb69e6ae210699b3f upstream. `element->buffer.pointer` should be binary blob. `%s` doesn't work perfect for them. Print hex string for ACPI_TYPE_BUFFER. Also update the documentation to reflect this. Fixes: 0a4cad9c11ad ("platform/chrome: Add ChromeOS ACPI device driver") Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tzung-Bi Shih <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Shih-Yi Chen <[email protected]> Date: Mon Aug 21 11:06:27 2023 -0400 platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications [ Upstream commit 0848cab765c634597636810bf76d0934003cce28 ] rshim console does not show all entries of dmesg. Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification. Signed-off-by: Shih-Yi Chen <[email protected]> Reviewed-by: Liming Sung <[email protected]> Reviewed-by: David Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mario Limonciello <[email protected]> Date: Wed Aug 23 13:54:21 2023 -0500 platform/x86/amd/pmf: Fix a missing cleanup path [ Upstream commit 4dbd6e61adc7e52dd1c9165f0ccaa90806611e40 ] On systems that support slider notifications but don't otherwise support granular slider the SPS cleanup path doesn't run. This means that loading/unloading/loading leads to failures because the sysfs files don't get setup properly when reloaded. Add the missing cleanup path. Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update") Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yang Li <[email protected]> Date: Thu Jul 27 09:43:15 2023 +0800 platform/x86/amd/pmf: Fix unsigned comparison with less than zero [ Upstream commit 785c00993dc4c4bb2f7b0f3a3f29c03a6f7aab2e ] The return value from the call to amd_pmf_get_pprof_modes() is int. However, the return value is being assigned to an unsigned char variable 'mode', so making 'mode' an int. silence the warning: ./drivers/platform/x86/amd/pmf/sps.c:183:5-9: WARNING: Unsigned expression compared with zero: mode < 0 Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5995 Signed-off-by: Yang Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Maxim Mikityanskiy <[email protected]> Date: Sun Jul 16 21:32:13 2023 +0300 platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks [ Upstream commit 7783e97f8558ad7a4d1748922461bc88483fbcdf ] HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS method. If VGBS is not called on boot, the firmware sends an initial 0xcd event shortly after calling the BTNL method, but only if the device is booted in the laptop mode. However, if the device is booted in the tablet mode and VGBS is not called, there is no initial 0xcc event, and the input device for SW_TABLET_MODE is not registered up until the user turns the device into the laptop mode. Call VGBS on boot on this device to get the initial state of SW_TABLET_MODE in a reliable way. Tested with BIOS 1.13.1. Signed-off-by: Maxim Mikityanskiy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kristian Angelov <[email protected]> Date: Thu Jul 20 18:29:50 2023 +0300 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops [ Upstream commit 6a758a3e831ce1a84c9c209ac6dc755f4c8ce77a ] This patch fixes setting the cmd values to 0xb3 and 0xb4. This is necessary on some TUF laptops in order to set the RGB mode. Closes: https://lore.kernel.org/platform-driver-x86/[email protected] Signed-off-by: Kristian Angelov <[email protected]> Reviewed-by: Luke D. Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Armin Wolf <[email protected]> Date: Sat Aug 5 07:36:10 2023 +0200 platform/x86: dell-sysman: Fix reference leak [ Upstream commit 7295a996fdab7bf83dc3d4078fa8b139b8e0a1bf ] If a duplicate attribute is found using kset_find_obj(), a reference to that attribute is returned. This means that we need to dispose it accordingly. Use kobject_put() to dispose the duplicate attribute in such a case. Compile-tested only. Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Signed-off-by: Armin Wolf <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Konstantin Shelekhin <[email protected]> Date: Sat Jul 22 18:59:20 2023 +0300 platform/x86: huawei-wmi: Silence ambient light sensor [ Upstream commit c21733754cd6ecbca346f2adf9b17d4cfa50504f ] Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022: ... [36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ... Fix that by ignoring events generated by ambient light sensor. This issue was reported on GitHub and resolved with the following merge request: https://github.com/aymanbagabas/Huawei-WMI/pull/70 I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list. Signed-off-by: Konstantin Shelekhin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sat Jul 15 20:15:16 2023 +0200 platform/x86: intel: hid: Always call BTNL ACPI method [ Upstream commit e3ab18de2b09361d6f0e4aafb9cfd6d002ce43a1 ] On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called. Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array. Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function. Reported-by: Maxim Mikityanskiy <[email protected]> Closes: https://lore.kernel.org/platform-driver-x86/[email protected]/ Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Wang Ming <[email protected]> Date: Mon Jul 17 18:11:02 2023 +0800 platform/x86: think-lmi: Use kfree_sensitive instead of kfree [ Upstream commit 1da0893aed2e48e2bdf37c29b029f2e060d25927 ] key might contain private part of the key, so better use kfree_sensitive to free it. Signed-off-by: Wang Ming <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Boris Brezillon <[email protected]> Date: Wed Aug 9 13:31:08 2023 +0200 PM / devfreq: Fix leak in devfreq_dev_release() commit 5693d077595de721f9ddbf9d37f40e5409707dfe upstream. srcu_init_notifier_head() allocates resources that need to be released with a srcu_cleanup_notifier_head() call. Reported by kmemleak. Fixes: 0fe3a66410a3 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier") Cc: <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Dhruva Gole <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Anna Schumaker <[email protected]> Date: Wed Aug 30 14:31:31 2023 -0400 pNFS: Fix assignment of xprtdata.cred [ Upstream commit c4a123d2e8c4dc91d581ee7d05c0cd51a0273fab ] The comma at the end of the line was leftover from an earlier refactor of the _nfs4_pnfs_v3_ds_connect() function. This is technically valid C, so the compilers didn't catch it, but if I'm understanding how it works correctly it assigns the return value of rpc_clnt_add_xprtr() to xprtdata.cred. Reported-by: Olga Kornievskaia <[email protected]> Fixes: a12f996d3413 ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family") Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nathan Chancellor <[email protected]> Date: Thu Apr 27 12:34:53 2023 -0700 powerpc/boot: Disable power10 features after BOOTAFLAGS assignment [ Upstream commit 2b694fc96fe33a7c042e3a142d27d945c8c668b0 ] When building the boot wrapper assembly files with clang after commit 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU"), the following warnings appear for each file built: '-prefixed' is not a recognized feature for this target (ignoring feature) '-pcrel' is not a recognized feature for this target (ignoring feature) While it is questionable whether or not LLVM should be emitting a warning when passed negative versions of code generation flags when building assembly files (since it does not emit a warning for the altivec and vsx flags), it is easy enough to work around this by just moving the disabled flags to BOOTCFLAGS after the assignment of BOOTAFLAGS, so that they are not added when building assembly files. Do so to silence the warnings. Fixes: 648a1783fe25 ("powerpc/boot: Fix boot wrapper code generation with CONFIG_POWER10_CPU") Link: https://github.com/ClangBuiltLinux/linux/issues/1839 Reviewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/20230427-remove-power10-args-from-boot-aflags-clang-v1-1-9107f7c943bc@kernel.org Signed-off-by: Sasha Levin <[email protected]>
Author: Sourabh Jain <[email protected]> Date: Tue Jul 4 10:37:15 2023 +0530 powerpc/fadump: reset dump area size if fadump memory reserve fails [ Upstream commit d1eb75e0dfed80d2d85b664e28a39f65b290ab55 ] In case fadump_reserve_mem() fails to reserve memory, the reserve_dump_area_size variable will retain the reserve area size. This will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect memory reserved by fadump. To fix this problem, reserve dump area size variable is set to 0 if fadump failed to reserve memory. Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size") Signed-off-by: Sourabh Jain <[email protected]> Acked-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Russell Currey <[email protected]> Date: Wed Mar 22 14:53:22 2023 +1100 powerpc/iommu: Fix notifiers being shared by PCI and VIO buses [ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ] fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both PCI and VIO buses. struct notifier_block is a linked list node, so this causes any notifiers later registered to either bus type to also be registered to the other since they share the same node. This causes issues in (at least) the vgaarb code, which registers a notifier for PCI buses. pci_notify() ends up being called on a vio device, converted with to_pci_dev() even though it's not a PCI device, and finally makes a bad access in vga_arbiter_add_pci_device() as discovered with KASAN: BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00 Read of size 4 at addr c000000264c26fdc by task swapper/0/1 Call Trace: dump_stack_lvl+0x1bc/0x2b8 (unreliable) print_report+0x3f4/0xc60 kasan_report+0x244/0x698 __asan_load4+0xe8/0x250 vga_arbiter_add_pci_device+0x60/0xe00 pci_notify+0x88/0x444 notifier_call_chain+0x104/0x320 blocking_notifier_call_chain+0xa0/0x140 device_add+0xac8/0x1d30 device_register+0x58/0x80 vio_register_device_node+0x9ac/0xce0 vio_bus_scan_register_devices+0xc4/0x13c __machine_initcall_pseries_vio_device_init+0x94/0xf0 do_one_initcall+0x12c/0xaa8 kernel_init_freeable+0xa48/0xba8 kernel_init+0x64/0x400 ret_from_kernel_thread+0x5c/0x64 Fix this by creating separate notifier_block structs for each bus type. Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection") Reported-by: Nageswara R Sastry <[email protected]> Signed-off-by: Russell Currey <[email protected]> Tested-by: Nageswara R Sastry <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> [mpe: Add #ifdef to fix CONFIG_IBMVIO=n build] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Liang He <[email protected]> Date: Wed Mar 22 11:04:23 2023 +0800 powerpc/mpc5xxx: Add missing fwnode_handle_put() [ Upstream commit b9bbbf4979073d5536b7650decd37fcb901e6556 ] In mpc5xxx_fwnode_get_bus_frequency(), we should add fwnode_handle_put() when break out of the iteration fwnode_for_each_parent_node() as it will automatically increase and decrease the refcounter. Fixes: de06fba62af6 ("powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode") Signed-off-by: Liang He <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Fri Aug 18 10:59:44 2023 +0200 powerpc/perf: Convert fsl_emb notifier to state machine callbacks [ Upstream commit 34daf445f82bd3a4df852bb5f1dffd792ac830a0 ] CC arch/powerpc/perf/core-fsl-emb.o arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes] 675 | void hw_perf_event_setup(int cpu) | ^~~~~~~~~~~~~~~~~~~ Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf: Convert book3s notifier to state machine callbacks") While at it, also fix following error: arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt': arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable] 648 | int found = 0; | ^~~~~ Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
Author: Benjamin Gray <[email protected]> Date: Thu Jul 6 11:08:16 2023 +1000 powerpc/powermac: Use early_* IO variants in via_calibrate_decr() [ Upstream commit 86582e6189dd8f9f52c25d46c70fe5d111da6345 ] On a powermac platform, via the call path: start_kernel() time_init() ppc_md.calibrate_decr() (pmac_calibrate_decr) via_calibrate_decr() ioremap() and iounmap() are called. The unmap can enable interrupts unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a warning later in the boot sequence in start_kernel(). Use the early_* variants of these IO functions to prevent this. The issue is pre-existing, but is surfaced by commit 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management"). Signed-off-by: Benjamin Gray <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Nicholas Piggin <[email protected]> Date: Tue May 9 19:15:59 2023 +1000 powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n [ Upstream commit 750bd41aeaeb1f0e0128aa4f8fcd6dd759713641 ] With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested instead of its value. This results in the tracing slowpath always being taken unnecessarily. Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Russell Currey <[email protected]> Date: Wed Aug 23 15:53:17 2023 +1000 powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT [ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ] lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca") Signed-off-by: Russell Currey <[email protected]> [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Wed Aug 9 10:01:43 2023 +0200 powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE [ Upstream commit 4a9dd8f292efd614f0a18452e6474fe19ae17b47 ] With skiboot_defconfig, Clang reports: CC arch/powerpc/mm/book3s64/radix_tlb.o arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function] static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid, ^ arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function] static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end, ^ This is because those functions are only called from functions enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE Move below functions inside that #ifdef * __tlbie_pid_lpid(unsigned long pid, * __tlbie_va_lpid(unsigned long va, unsigned long pid, * fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid) * _tlbie_pid_lpid(unsigned long pid, unsigned long lpid, * fixup_tlbie_va_range_lpid(unsigned long va, * __tlbie_va_range_lpid(unsigned long start, unsigned long end, * _tlbie_va_range_lpid(unsigned long start, unsigned long end, Fixes: f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Ellerman <[email protected]> Date: Wed Aug 23 15:53:16 2023 +1000 powerpc: Don't include lppaca.h in paca.h [ Upstream commit 1aa000667669fa855853decbb1c69e974d8ff716 ] By adding a forward declaration for struct lppaca we can untangle paca.h and lppaca.h. Also move get_lppaca() into lppaca.h for consistency. Add includes of lppaca.h to some files that need it. Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Stable-dep-of: eac030b22ea1 ("powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT") Signed-off-by: Sasha Levin <[email protected]>
Author: Kees Cook <[email protected]> Date: Thu Aug 10 22:45:32 2023 -0700 printk: ringbuffer: Fix truncating buffer size min_t cast commit 53e9e33ede37a247d926db5e4a9e56b55204e66c upstream. If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in copy_data() was causing writes to truncate. This manifested as output bytes being skipped, seen as %NUL bytes in pstore dumps when the available record size was larger than 65536. Fix the cast to no longer truncate the calculation. Cc: Petr Mladek <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: John Ogness <[email protected]> Reported-by: Vijay Balakrishna <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: b6cf8b3f3312 ("printk: add lockless ringbuffer") Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Tested-by: Vijay Balakrishna <[email protected]> Tested-by: Guilherme G. Piccoli <[email protected]> # Steam Deck Reviewed-by: Tyler Hicks (Microsoft) <[email protected]> Tested-by: Tyler Hicks (Microsoft) <[email protected]> Reviewed-by: John Ogness <[email protected]> Reviewed-by: Sergey Senozhatsky <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aleksa Sarai <[email protected]> Date: Fri Jul 14 00:09:58 2023 +1000 procfs: block chmod on /proc/thread-self/comm commit ccf61486fe1e1a48e18c638d1813cda77b3c0737 upstream. Due to an oversight in commit 1b3044e39a89 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD, chmod operations on /proc/thread-self/comm were no longer blocked as they are on almost all other procfs files. A very similar situation with /proc/self/environ was used to as a root exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a correctness issue. Ref: https://lwn.net/Articles/191954/ Ref: 6d76fa58b050 ("Don't allow chmod() on the /proc/<pid>/ files") Fixes: 1b3044e39a89 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE") Cc: [email protected] # v4.7+ Signed-off-by: Aleksa Sarai <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Enlin Mu <[email protected]> Date: Tue Aug 1 14:04:32 2023 +0800 pstore/ram: Check start of empty przs during init commit fe8c3623ab06603eb760444a032d426542212021 upstream. After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as valid"), initialization would assume a prz was valid after seeing that the buffer_size is zero (regardless of the buffer start position). This unchecked start value means it could be outside the bounds of the buffer, leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do_translation_fault+0x68/0x80 do_mem_abort+0x68/0xf8 el1_da+0x1c/0xc0 __raw_writeb+0x38/0x174 __memcpy_toio+0x40/0xac persistent_ram_update+0x44/0x12c persistent_ram_write+0x1a8/0x1b8 ramoops_pstore_write+0x198/0x1e8 pstore_console_write+0x94/0xe0 ... To avoid this, also check if the prz start is 0 during the initialization phase. If not, the next prz sanity check case will discover it (start > size) and zap the buffer back to a sane state. Fixes: 30696378f68a ("pstore/ram: Do not treat empty buffers as valid") Cc: Yunlong Xing <[email protected]> Cc: [email protected] Signed-off-by: Enlin Mu <[email protected]> Link: https://lore.kernel.org/r/[email protected] [kees: update commit log with backtrace and clarifications] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Baokun Li <[email protected]> Date: Fri Jun 30 19:08:20 2023 +0800 quota: add new helper dquot_active() [ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ] Add new helper function dquot_active() to make the code more concise. Signed-off-by: Baokun Li <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Fri Jun 30 19:08:18 2023 +0800 quota: factor out dquot_write_dquot() [ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ] Refactor out dquot_write_dquot() to reduce duplicate code. Signed-off-by: Baokun Li <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Fri Jun 30 19:08:21 2023 +0800 quota: fix dqput() to follow the guarantees dquot_srcu should provide [ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ] The dquot_mark_dquot_dirty() using dquot references from the inode should be protected by dquot_srcu. quota_off code takes care to call synchronize_srcu(&dquot_srcu) to not drop dquot references while they are used by other users. But dquot_transfer() breaks this assumption. We call dquot_transfer() to drop the last reference of dquot and add it to free_dquots, but there may still be other users using the dquot at this time, as shown in the function graph below: cpu1 cpu2 _________________|_________________ wb_do_writeback CHOWN(1) ... ext4_da_update_reserve_space dquot_claim_block ... dquot_mark_dquot_dirty // try to dirty old quota test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE if (test_bit(DQ_MOD_B, &dquot->dq_flags)) // test no dirty, wait dq_list_lock ... dquot_transfer __dquot_transfer dqput_all(transfer_from) // rls old dquot dqput // last dqput dquot_release clear_bit(DQ_ACTIVE_B, &dquot->dq_flags) atomic_dec(&dquot->dq_count) put_dquot_last(dquot) list_add_tail(&dquot->dq_free, &free_dquots) // add the dquot to free_dquots if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags)) add dqi_dirty_list // add released dquot to dirty_list This can cause various issues, such as dquot being destroyed by dqcache_shrink_scan() after being added to free_dquots, which can trigger a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots and then to dirty_list, it is added to free_dquots again after dquot_writeback_dquots() is executed, which causes the free_dquots list to be corrupted and triggers a UAF when dqcache_shrink_scan() is called for freeing dquot twice. As Honza said, we need to fix dquot_transfer() to follow the guarantees dquot_srcu should provide. But calling synchronize_srcu() directly from dquot_transfer() is too expensive (and mostly unnecessary). So we add dquot whose last reference should be dropped to the new global dquot list releasing_dquots, and then queue work item which would call synchronize_srcu() and after that perform the final cleanup of all the dquots on releasing_dquots. Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots") Suggested-by: Jan Kara <[email protected]> Signed-off-by: Baokun Li <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Baokun Li <[email protected]> Date: Fri Jun 30 19:08:19 2023 +0800 quota: rename dquot_active() to inode_quota_active() [ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ] Now we have a helper function dquot_dirty() to determine if dquot has DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by renaming it to inode_quota_active() and later on we will add the helper function dquot_active() to determine if dquot has DQ_ACTIVE_B bit. Signed-off-by: Baokun Li <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide") Signed-off-by: Sasha Levin <[email protected]>
Author: Heiner Kallweit <[email protected]> Date: Fri Aug 25 21:44:01 2023 +0200 r8169: fix ASPM-related issues on a number of systems with NIC version from RTL8168h commit 90ca51e8c654699b672ba61aeaa418dfb3252e5e upstream. This effectively reverts 4b5f82f6aaef. On a number of systems ASPM L1 causes tx timeouts with RTL8168h, see referenced bug report. Fixes: 4b5f82f6aaef ("r8169: enable ASPM L1/L1.1 from RTL8168h") Cc: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217814 Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zqiang <[email protected]> Date: Mon Sep 4 18:08:05 2023 +0000 rcu: dump vmalloc memory info safely commit c83ad36a18c02c0f51280b50272327807916987f upstream. Currently, for double invoke call_rcu(), will dump rcu_head objects memory info, if the objects is not allocated from the slab allocator, the vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to be held, since the call_rcu() can be invoked in interrupt context, therefore, there is a possibility of spinlock deadlock scenarios. And in Preempt-RT kernel, the rcutorture test also trigger the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 3 locks held by swapper/0/1: #0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0 #1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370 #2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70 irq event stamp: 565512 hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940 hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370 softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170 softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0 Preemption disabled at: [<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xb0 dump_stack+0x14/0x20 __might_resched+0x1aa/0x280 ? __pfx_rcu_torture_err_cb+0x10/0x10 rt_spin_lock+0x53/0x130 ? find_vmap_area+0x1f/0x70 find_vmap_area+0x1f/0x70 vmalloc_dump_obj+0x20/0x60 mem_dump_obj+0x22/0x90 __call_rcu_common+0x5bf/0x940 ? debug_smp_processor_id+0x1b/0x30 call_rcu_hurry+0x14/0x20 rcu_torture_init+0x1f82/0x2370 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_leak_cb+0x10/0x10 ? __pfx_rcu_torture_init+0x10/0x10 do_one_initcall+0x6c/0x300 ? debug_smp_processor_id+0x1b/0x30 kernel_init_freeable+0x2b9/0x540 ? __pfx_kernel_init+0x10/0x10 kernel_init+0x1f/0x150 ret_from_fork+0x40/0x50 ? __pfx_kernel_init+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The previous patch fixes this by using the deadlock-safe best-effort version of find_vm_area. However, in case of failure print the fact that the pointer was a vmalloc pointer so that we print at least something. Link: https://lkml.kernel.org/r/[email protected] Fixes: 98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory") Signed-off-by: Zqiang <[email protected]> Signed-off-by: Joel Fernandes (Google) <[email protected]> Reported-by: Zhen Lei <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Uladzislau Rezki (Sony) <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Yonatan Nachum <[email protected]> Date: Tue Aug 22 08:27:25 2023 +0000 RDMA/efa: Fix wrong resources deallocation order [ Upstream commit dc202c57e9a1423aed528e4b8dc949509cd32191 ] When trying to destroy QP or CQ, we first decrease the refcount and potentially free memory regions allocated for the object and then request the device to destroy the object. If the device fails, the object isn't fully destroyed so the user/IB core can try to destroy the object again which will lead to underflow when trying to decrease an already zeroed refcount. Deallocate resources in reverse order of allocating them to safely free them. Fixes: ff6629f88c52 ("RDMA/efa: Do not delay freeing of DMA pages") Reviewed-by: Michael Margolin <[email protected]> Reviewed-by: Yossi Leybovich <[email protected]> Signed-off-by: Yonatan Nachum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chengchang Tang <[email protected]> Date: Fri Aug 4 09:27:11 2023 +0800 RDMA/hns: Fix CQ and QP cache affinity [ Upstream commit 9e03dbea2b0634b21a45946b4f8097e0dc86ebe1 ] Currently, the affinity between QP cache and CQ cache is not considered when assigning QPN, it will affect the message rate of HW. Allocate QPN from QP cache with better CQ affinity to get better performance. Fixes: 71586dd20010 ("RDMA/hns: Create QP with selected QPN for bank load balance") Signed-off-by: Chengchang Tang <[email protected]> Signed-off-by: Junxian Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Junxian Huang <[email protected]> Date: Fri Aug 4 09:27:10 2023 +0800 RDMA/hns: Fix inaccurate error label name in init instance [ Upstream commit c9c0bd3c177d93d80968f720304087ba83fe8f74 ] This patch fixes inaccurate error label name in init instance. Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT") Signed-off-by: Junxian Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Junxian Huang <[email protected]> Date: Fri Aug 4 09:27:09 2023 +0800 RDMA/hns: Fix incorrect post-send with direct wqe of wr-list [ Upstream commit 706efac4477cdb8be857f6322457de524acc02ff ] Currently, direct wqe is not supported for wr-list. RoCE driver excludes direct wqe for wr-list by judging whether the number of wr is 1. For a wr-list where the second wr is a length-error atomic wr, the post-send driver handles the first wr and adds 1 to the wr number counter firstly. While handling the second wr, the driver finds out a length error and terminates the wr handle process, remaining the counter at 1. This causes the driver mistakenly judges there is only 1 wr and thus enters the direct wqe process, carrying the current length-error atomic wqe. This patch fixes the error by adding a judgement whether the current wr is a bad wr. If so, use the normal doorbell process but not direct wqe despite the wr number is 1. Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe") Signed-off-by: Junxian Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chengchang Tang <[email protected]> Date: Fri Aug 4 09:27:08 2023 +0800 RDMA/hns: Fix port active speed [ Upstream commit df1bcf90a66a10967a3a43510b42cb3566208011 ] HW supports a variety of different speed, but the current speed is fixed. The real speed should be querried from ethernet. Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Chengchang Tang <[email protected]> Signed-off-by: Junxian Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christopher Bednarz <[email protected]> Date: Fri Aug 18 09:48:38 2023 -0500 RDMA/irdma: Prevent zero-length STAG registration [ Upstream commit bb6d73d9add68ad270888db327514384dfa44958 ] Currently irdma allows zero-length STAGs to be programmed in HW during the kernel mode fast register flow. Zero-length MR or STAG registration disable HW memory length checks. Improve gaps in bounds checking in irdma by preventing zero-length STAG or MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set. This addresses the disclosure CVE-2023-25775. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Christopher Bednarz <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gustavo A. R. Silva <[email protected]> Date: Wed Aug 2 08:46:26 2023 -0600 RDMA/irdma: Replace one-element array with flexible-array member [ Upstream commit 38313c6d2a02c28162e06753b01bd885caf9386d ] One-element and zero-length arrays are deprecated. So, replace one-element array in struct irdma_qvlist_info with flexible-array member. A patch for this was sent a while ago[1]. However, it seems that, at the time, the changes were partially folded[2][3], and the actual flexible-array transformation was omitted. This patch fixes that. The only binary difference seen before/after changes is shown below: | drivers/infiniband/hw/irdma/hw.o | @@ -868,7 +868,7 @@ | drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2) | size += struct_size(iw_qvlist, qv_info, rf->msix_count); | 55b: imul $0x45c,%rdi,%rdi |- 562: add $0x10,%rdi |+ 562: add $0x4,%rdi which is, of course, expected as it reflects the mistake made while folding the patch I've mentioned above. Worth mentioning is the fact that with this change we save 12 bytes of memory, as can be inferred from the diff snapshot above. Notice that: $ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o struct irdma_qv_info { u32 v_idx; /* 0 4 */ u16 ceq_idx; /* 4 2 */ u16 aeq_idx; /* 6 2 */ u8 itr_idx; /* 8 1 */ /* size: 12, cachelines: 1, members: 4 */ /* padding: 3 */ /* last cacheline: 12 bytes */ }; Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/ [1] Link: https://lore.kernel.org/linux-hardening/[email protected]/ [2] Link: https://lore.kernel.org/linux-rdma/[email protected]/T/#u [3] Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Minjie Du <[email protected]> Date: Thu Jul 6 10:27:03 2023 +0800 RDMA/qedr: Remove a duplicate assignment in irdma_query_ah() [ Upstream commit 65e02e840847158c7ee48ca8e6e91062b0f78662 ] Delete a duplicate statement from this function implementation. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Minjie Du <[email protected]> Acked-by: Alok Prasad <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bob Pearson <[email protected]> Date: Fri Jul 21 15:07:49 2023 -0500 RDMA/rxe: Fix incomplete state save in rxe_requester [ Upstream commit 5d122db2ff80cd2aed4dcd630befb56b51ddf947 ] If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed. Fixes: 3050b9985024 ("IB/rxe: Fix race condition between requester and completer") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bob Pearson <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bob Pearson <[email protected]> Date: Fri Oct 21 15:01:05 2022 -0500 RDMA/rxe: Split rxe_run_task() into two subroutines [ Upstream commit dccb23f6c312e4480fe32ccbc2afac1a5cac7e5e ] Split rxe_run_task(task, sched) into rxe_run_task(task) and rxe_sched_task(task). Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ian Ziemba <[email protected]> Signed-off-by: Bob Pearson <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Stable-dep-of: 5d122db2ff80 ("RDMA/rxe: Fix incomplete state save in rxe_requester") Signed-off-by: Sasha Levin <[email protected]>
Author: Guoqing Jiang <[email protected]> Date: Mon Aug 21 21:32:53 2023 +0800 RDMA/siw: Balance the reference of cep->kref in the error path [ Upstream commit b056327bee09e6b86683d3f709a438ccd6031d72 ] The siw_connect can go to err in below after cep is allocated successfully: 1. If siw_cm_alloc_work returns failure. In this case socket is not assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc. We need to call siw_cep_put twice since cep->kref is increased once after it was initialized. 2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get and when associate socket with cep after it was initialized. So we need to call siw_cep_put three times (one in siw_socket_disassoc). 3. siw_send_mpareqrep returns error, this scenario is similar as 2. So we need to remove one siw_cep_put in the error path. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Signed-off-by: Guoqing Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Bernard Metzler <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Guoqing Jiang <[email protected]> Date: Mon Aug 21 21:32:54 2023 +0800 RDMA/siw: Correct wrong debug message [ Upstream commit bee024d20451e4ce04ea30099cad09f7f75d288b ] We need to print num_sle first then pbl->max_buf per the condition. Also replace mem->pbl with pbl while at it. Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Signed-off-by: Guoqing Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Bernard Metzler <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chuck Lever <[email protected]> Date: Mon Jul 17 11:12:12 2023 -0400 RDMA/siw: Fabricate a GID on tun and loopback devices [ Upstream commit bad5b6e34ffbaacc77ad28a0f482e33b3929e635 ] LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses. Currently, siw_device_create() falls back to copying the IB device's name in those cases, because an all-zero MAC address breaks the RDMA core address resolution mechanism. However, at the point when siw_device_create() constructs a GID, the ib_device::name field is uninitialized, leaving the MAC address to remain in an all-zero state. Fabricate a random artificial GID for such devices, and ensure this artificial GID is returned for all device query operations. Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net Reported-by: Tom Talpey <[email protected]> Fixes: a2d36b02c15d ("RDMA/siw: Enable siw on tunnel devices") Reviewed-by: Bernard Metzler <[email protected]> Reviewed-by: Tom Talpey <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Waiman Long <[email protected]> Date: Fri Jul 7 13:53:55 2023 -0400 refscale: Fix uninitalized use of wait_queue_head_t [ Upstream commit f5063e8948dad7f31adb007284a5d5038ae31bb8 ] Running the refscale test occasionally crashes the kernel with the following error: [ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8 [ 8569.952900] #PF: supervisor read access in kernel mode [ 8569.952902] #PF: error_code(0x0000) - not-present page [ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0 [ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI [ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021 [ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190 : [ 8569.952940] Call Trace: [ 8569.952941] <TASK> [ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale] [ 8569.952959] kthread+0x10e/0x130 [ 8569.952966] ret_from_fork+0x1f/0x30 [ 8569.952973] </TASK> The likely cause is that init_waitqueue_head() is called after the call to the torture_create_kthread() function that creates the ref_scale_reader kthread. Although this init_waitqueue_head() call will very likely complete before this kthread is created and starts running, it is possible that the calling kthread will be delayed between the calls to torture_create_kthread() and init_waitqueue_head(). In this case, the new kthread will use the waitqueue head before it is properly initialized, which is not good for the kernel's health and well-being. The above crash happened here: static inline void __add_wait_queue(...) { : if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here The offset of flags from list_head entry in wait_queue_entry is -0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task structure is zero initialized, the instruction will try to access address 0xffffffffffffffe8, which is exactly the fault address listed above. This commit therefore invokes init_waitqueue_head() before creating the kthread. Fixes: 653ed64b01dc ("refperf: Add a test to measure performance of read-side synchronization") Signed-off-by: Waiman Long <[email protected]> Reviewed-by: Qiuxu Zhuo <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Acked-by: Joel Fernandes (Google) <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Fri Jul 21 17:55:33 2023 +0300 regmap: rbtree: Use alloc_flags for memory allocations [ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ] The kunit tests discovered a sleeping in atomic bug. The allocations in the regcache-rbtree code should use the map->alloc_flags instead of GFP_KERNEL. [ 5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 [ 5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch [ 5.006219] preempt_count: 1, expected: 0 [ 5.006414] 1 lock held by kunit_try_catch/117: [ 5.006590] #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c [ 5.007493] irq event stamp: 162 [ 5.007627] hardirqs last enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294 [ 5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80 [ 5.008119] softirqs last enabled at (0): [<801110ac>] copy_process+0x810/0x2138 [ 5.008356] softirqs last disabled at (0): [<00000000>] 0x0 [ 5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G N 6.4.4-rc3-g0e8d2fdfb188 #1 [ 5.009011] Hardware name: Generic DT based system [ 5.009277] unwind_backtrace from show_stack+0x18/0x1c [ 5.009497] show_stack from dump_stack_lvl+0x38/0x5c [ 5.009676] dump_stack_lvl from __might_resched+0x188/0x2d0 [ 5.009860] __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c [ 5.010061] __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8 [ 5.010254] kmalloc_trace from regcache_rbtree_write+0x26c/0x468 [ 5.010446] regcache_rbtree_write from _regmap_write+0x88/0x140 [ 5.010634] _regmap_write from regmap_write+0x44/0x68 [ 5.010803] regmap_write from basic_read_write+0x8c/0x270 [ 5.010980] basic_read_write from kunit_try_run_case+0x48/0xa0 Fixes: 28644c809f44 ("regmap: Add the rbtree cache support") Reported-by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Dan Carpenter <[email protected]> Tested-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Matthew Wilcox <[email protected]> Date: Sun Jun 4 12:16:06 2023 +0100 reiserfs: Check the return value from __getblk() [ Upstream commit ba38980add7ffc9e674ada5b4ded4e7d14e76581 ] __getblk() can return a NULL pointer if we run out of memory or if we try to access beyond the end of the device; check it and handle it appropriately. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Link: https://lore.kernel.org/lkml/CAFcO6XOacq3hscbXevPQP7sXRoYFz34ZdKPYjmd6k5sZuhGFDw@mail.gmail.com/ Tested-by: butt3rflyh4ck <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # probably introduced in 2002 Acked-by: Edward Shishkin <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Tue Jul 18 10:41:52 2023 -0700 Revert "bridge: Add extack warning when enabling STP in netns." [ Upstream commit 7ebd00a5a20c48e6020d49a3b2afb3cdfd2da8b7 ] This reverts commit 56a16035bb6effb37177867cea94c13a8382f745. Since the previous commit, STP works on bridge in netns. # unshare -n # ip link add br0 type bridge # ip link add veth0 type veth peer name veth1 # ip link set veth0 master br0 up [ 50.558135] br0: port 1(veth0) entered blocking state [ 50.558366] br0: port 1(veth0) entered disabled state [ 50.558798] veth0: entered allmulticast mode [ 50.564401] veth0: entered promiscuous mode # ip link set veth1 master br0 up [ 54.215487] br0: port 2(veth1) entered blocking state [ 54.215657] br0: port 2(veth1) entered disabled state [ 54.215848] veth1: entered allmulticast mode [ 54.219577] veth1: entered promiscuous mode # ip link set br0 type bridge stp_state 1 # ip link set br0 up [ 61.960726] br0: port 2(veth1) entered blocking state [ 61.961097] br0: port 2(veth1) entered listening state [ 61.961495] br0: port 1(veth0) entered blocking state [ 61.961653] br0: port 1(veth0) entered listening state [ 63.998835] br0: port 2(veth1) entered blocking state [ 77.437113] br0: port 1(veth0) entered learning state [ 86.653501] br0: received packet on veth0 with own address as source address (addr:6e:0f:e7:6f:5f:5f, vlan:0) [ 92.797095] br0: port 1(veth0) entered forwarding state [ 92.797398] br0: topology change detected, propagating Let's remove the warning. Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michel Dänzer <[email protected]> Date: Mon May 22 15:08:23 2023 +0200 Revert "drm/amd/display: Do not set drr on pipe commit" commit 360930985ec9f394c82ba0b235403b4a366d1560 upstream. This reverts commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7. Caused a regression: Samsung Odyssey Neo G9, running at 5120x1440@240/VRR, connected to Navi 21 via DisplayPort, blanks and the GPU hangs while starting the Steam game Assetto Corsa Competizione (via Proton 7.0). Example dmesg excerpt: amdgpu 0000:0c:00.0: [drm] ERROR [CRTC:82:crtc-0] flip_done timed out NMI watchdog: Watchdog detected hard LOCKUP on cpu 6 [...] RIP: 0010:amdgpu_device_rreg.part.0+0x2f/0xf0 [amdgpu] Code: 41 54 44 8d 24 b5 00 00 00 00 55 89 f5 53 48 89 fb 4c 3b a7 60 0b 00 00 73 6a 83 e2 02 74 29 4c 03 a3 68 0b 00 00 45 8b 24 24 <48> 8b 43 08 0f b7 70 3e 66 90 44 89 e0 5b 5d 41 5c 31 d2 31 c9 31 RSP: 0000:ffffb39a119dfb88 EFLAGS: 00000086 RAX: ffffffffc0eb96a0 RBX: ffff9e7963dc0000 RCX: 0000000000007fff RDX: 0000000000000000 RSI: 0000000000004ff6 RDI: ffff9e7963dc0000 RBP: 0000000000004ff6 R08: ffffb39a119dfc40 R09: 0000000000000010 R10: ffffb39a119dfc40 R11: ffffb39a119dfc44 R12: 00000000000e05ae R13: 0000000000000000 R14: ffff9e7963dc0010 R15: 0000000000000000 FS: 000000001012f6c0(0000) GS:ffff9e805eb80000(0000) knlGS:000000007fd40000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000461ca000 CR3: 00000002a8a20000 CR4: 0000000000350ee0 Call Trace: <TASK> dm_read_reg_func+0x37/0xc0 [amdgpu] generic_reg_get2+0x22/0x60 [amdgpu] optc1_get_crtc_scanoutpos+0x6a/0xc0 [amdgpu] dc_stream_get_scanoutpos+0x74/0x90 [amdgpu] dm_crtc_get_scanoutpos+0x82/0xf0 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x91/0x190 [amdgpu] ? dm_read_reg_func+0x37/0xc0 [amdgpu] amdgpu_get_vblank_counter_kms+0xb4/0x1a0 [amdgpu] dm_pflip_high_irq+0x213/0x2f0 [amdgpu] amdgpu_dm_irq_handler+0x8a/0x200 [amdgpu] amdgpu_irq_dispatch+0xd4/0x220 [amdgpu] amdgpu_ih_process+0x7f/0x110 [amdgpu] amdgpu_irq_handler+0x1f/0x70 [amdgpu] __handle_irq_event_percpu+0x46/0x1b0 handle_irq_event+0x34/0x80 handle_edge_irq+0x9f/0x240 __common_interrupt+0x66/0x110 common_interrupt+0x5c/0xd0 asm_common_interrupt+0x22/0x40 Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Chao Yu <[email protected]> Date: Thu Jul 20 19:29:53 2023 +0800 Revert "f2fs: fix to do sanity check on extent cache correctly" [ Upstream commit 958ccbbf1ce716d77c7cfa79ace50a421c1eed73 ] syzbot reports a f2fs bug as below: UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19 index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]') Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 inline_data_addr fs/f2fs/f2fs.h:3275 [inline] __recover_inline_status fs/f2fs/inode.c:113 [inline] do_read_inode fs/f2fs/inode.c:480 [inline] f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604 f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601 mount_bdev+0x276/0x3b0 fs/super.c:1391 legacy_get_tree+0xef/0x190 fs/fs_context.c:611 vfs_get_tree+0x8c/0x270 fs/super.c:1519 do_new_mount+0x28f/0xae0 fs/namespace.c:3335 do_mount fs/namespace.c:3675 [inline] __do_sys_mount fs/namespace.c:3884 [inline] __se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue was bisected to: commit d48a7b3a72f121655d95b5157c32c7d555e44c05 Author: Chao Yu <[email protected]> Date: Mon Jan 9 03:49:20 2023 +0000 f2fs: fix to do sanity check on extent cache correctly The root cause is we applied both v1 and v2 of the patch, v2 is the right fix, so it needs to revert v1 in order to fix reported issue. v1: commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/[email protected]/ v2: commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly") https://lore.kernel.org/lkml/[email protected]/ Reported-by: [email protected] Closes: https://lore.kernel.org/linux-f2fs-devel/[email protected]/ Fixes: d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly") Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Leon Romanovsky <[email protected]> Date: Mon Aug 21 10:57:14 2023 +0300 Revert "IB/isert: Fix incorrect release of isert connection" [ Upstream commit dfe261107c080709459c32695847eec96238852b ] Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is causing problems on OPA when DEVICE_REMOVAL is happening. ------------[ cut here ]------------ WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359 ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1 Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core] Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83 c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206 RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640 RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18 R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38 FS: 00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0 Call Trace: <TASK> ? __warn+0x80/0x130 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] ? report_bug+0x195/0x1a0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core] disable_device+0x9d/0x160 [ib_core] __ib_unregister_device+0x42/0xb0 [ib_core] ib_unregister_device+0x22/0x30 [ib_core] rvt_unregister_device+0x20/0x90 [rdmavt] hfi1_unregister_ib_device+0x16/0xf0 [hfi1] remove_one+0x55/0x1a0 [hfi1] pci_device_remove+0x36/0xa0 device_release_driver_internal+0x193/0x200 driver_detach+0x44/0x90 bus_remove_driver+0x69/0xf0 pci_unregister_driver+0x2a/0xb0 hfi1_mod_cleanup+0xc/0x3c [hfi1] __do_sys_delete_module.constprop.0+0x17a/0x2f0 ? exit_to_user_mode_prepare+0xc4/0xd0 ? syscall_trace_enter.constprop.0+0x126/0x1a0 do_syscall_64+0x5c/0x90 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exc_page_fault+0x65/0x150 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7ff1e643f5ab Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8 RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000 R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8 R13: 0000000000000000 R14: 00005615267fdcb8 R15: 00007ffec9105ff8 </TASK> ---[ end trace 0000000000000000 ]--- And... restrack: ------------[ cut here ]------------ infiniband hfi1_0: BUG: RESTRACK detected leak of resources restrack: Kernel PD object allocated by ib_isert is not freed restrack: Kernel CQ object allocated by ib_core is not freed restrack: Kernel QP object allocated by rdma_cm is not freed restrack: ------------[ cut here ]------------ Fixes: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") Reported-by: Dennis Dalessandro <[email protected]> Closes: https://lore.kernel.org/all/[email protected] Link: https://lore.kernel.org/r/a27982d3235005c58f6d321f3fad5eb6e1beaf9e.1692604607.git.leonro@nvidia.com Tested-by: Dennis Dalessandro <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Maciej W. Rozycki <[email protected]> Date: Thu Jun 1 13:56:36 2023 +0100 Revert "MIPS: unhide PATA_PLATFORM" [ Upstream commit 1e13da548fbffb807633df85a244b70caa90bdf7 ] Revert commit 75b18aac6fa3 ("MIPS: unhide PATA_PLATFORM") now that HAVE_PATA_PLATFORM is set selectively for all the relevant platforms. Verified with `db1xxx_defconfig' and `sb1250_swarm_defconfig' by making sure PATA_PLATFORM is still there in `.config' with this change applied, and with `malta_defconfig' by making sure it's now gone. Signed-off-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sabrina Dubroca <[email protected]> Date: Mon Sep 4 10:56:04 2023 +0200 Revert "net: macsec: preserve ingress frame ordering" commit d3287e4038ca4f81e02067ab72d087af7224c68b upstream. This reverts commit ab046a5d4be4c90a3952a0eae75617b49c0cb01b. It was trying to work around an issue at the crypto layer by excluding ASYNC implementations of gcm(aes), because a bug in the AESNI version caused reordering when some requests bypassed the cryptd queue while older requests were still pending on the queue. This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd reordering problem on gcm"), which pre-dates ab046a5d4be4. Herbert Xu confirmed that all ASYNC implementations are expected to maintain the ordering of completions wrt requests, so we can use them in MACsec. On my test machine, this restores the performance of a single netperf instance, from 1.4Gbps to 4.4Gbps. Link: https://lore.kernel.org/netdev/9328d206c5d9f9239cae27e62e74de40b258471d.1692279161.git.sd@queasysnail.net/T/ Link: https://lore.kernel.org/netdev/[email protected]/ Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: ab046a5d4be4 ("net: macsec: preserve ingress frame ordering") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/11c952469d114db6fb29242e1d9545e61f52f512.1693757159.git.sd@queasysnail.net Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bjorn Helgaas <[email protected]> Date: Fri Sep 8 14:55:30 2023 -0500 Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset" commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream. This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83. d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vidya Sagar <[email protected]> Date: Mon Jun 19 15:56:04 2023 +0530 Revert "PCI: tegra194: Enable support for 256 Byte payload" commit ebfde1584d9f037b6309fc682c96e22dac7bcb7a upstream. After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating the hierarchy. Consider an Endpoint that supports only MPS=128. In the default situation (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux tries to configure the MPS of every device to match the upstream bridge. If the Endpoint is directly below the Root Port, Linux can reduce the Root Port MPS to 128 to match the Endpoint. But if there's a switch in the middle, Linux doesn't reduce the Root Port MPS because other devices below the switch may already be configured with MPS larger than 128. This scenario results in uncorrectable Malformed TLP errors if the Root Port sends TLPs with payloads larger than 128 bytes. These errors can be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't seem to be a good idea to always have this parameter even for basic functionality to work. Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") so the Root Ports default to MPS=128, which all devices support. If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to get the benefit of larger MPS settings. [bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at the top, add missing acked by tag] Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") Link: https://lore.kernel.org/linux-pci/[email protected] Signed-off-by: Vidya Sagar <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Acked-by: Jon Hunter <[email protected]> Cc: [email protected] # v6.0-rc1+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Aurabindo Pillai <[email protected]> Date: Wed Mar 22 14:29:26 2023 -0400 Revert "Revert drm/amd/display: Enable Freesync Video Mode by default" [ Upstream commit 11b92df8a2f7f4605ccc764ce6ae4a72760674df ] This reverts commit 4243c84aa082d8fba70c45f48eb2bb5c19799060. Enables freesync video by default, since the hang and corruption issue on eDP panels are now fixed. Acked-by: Stylon Wang <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nilesh Javali <[email protected]> Date: Mon Aug 21 18:30:44 2023 +0530 Revert "scsi: qla2xxx: Fix buffer overrun" commit 641671d97b9199f1ba35ccc2222d4b189a6a5de5 upstream. Revert due to Get PLOGI Template failed. This reverts commit b68710a8094fdffe8dd4f7a82c82649f479bb453. Cc: [email protected] Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kalle Valo <[email protected]> Date: Mon Jul 24 13:08:23 2023 +0300 Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on GCC 12" [ Upstream commit a1ce186db7f0e449f35d12fb55ae0da2a1b400e2 ] This reverts commit bd1d129daa3ede265a880e2c6a7f91eab0f4dc62. The dangling-pointer warnings were disabled kernel-wide by commit 49beadbd47c2 ("gcc-12: disable '-Wdangling-pointer' warning for now") for v5.19. So this hack in ath6kl is not needed anymore. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Jiasheng Jiang <[email protected]> Date: Mon Jun 19 11:06:31 2023 +0800 rpmsg: glink: Add check for kstrdup [ Upstream commit b5c9ee8296a3760760c7b5d2e305f91412adc795 ] Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Signed-off-by: Jiasheng Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Stefan Haberland <[email protected]> Date: Fri Jul 21 21:36:46 2023 +0200 s390/dasd: fix hanging device after request requeue [ Upstream commit 8a2278ce9c25048d999fe1a3561def75d963f471 ] The DASD device driver has a function to requeue requests to the blocklayer. This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings. The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue. In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly. Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices. Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiko Carstens <[email protected]> Date: Mon Aug 28 17:31:42 2023 +0200 s390/dasd: fix string length handling commit f7cf22424665043787a96a66a048ff6b2cfd473c upstream. Building dasd_eckd.o with latest clang reveals this bug: CC drivers/s390/block/dasd_eckd.o drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 11 [-Wfortify-source] 1082 | snprintf(print_uid, sizeof(*print_uid), | ^ drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 10 [-Wfortify-source] 1087 | snprintf(print_uid, sizeof(*print_uid), | ^ Fix this by moving and using the existing UID_STRLEN for the arrays that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN to clarify its scope. Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf") Reviewed-by: Peter Oberparleiter <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Tested-by: Nick Desaulniers <[email protected]> # build Reported-by: Nathan Chancellor <[email protected]> Closes: https://github.com/ClangBuiltLinux/linux/issues/1923 Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Stefan Haberland <[email protected]> Date: Fri Jul 21 21:36:45 2023 +0200 s390/dasd: use correct number of retries for ERP requests [ Upstream commit acea28a6b74f458defda7417d2217b051ba7d444 ] If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery. The ERP request gets a number of retries assigned. This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs. Correctly use the number of retries of the original request for ERP requests. Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gerald Schaefer <[email protected]> Date: Thu Aug 10 10:22:36 2023 +0200 s390/dcssblk: fix kernel crash with list_add corruption commit c8f40a0bccefd613748d080147469a4652d6e74c upstream. Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") Cc: <[email protected]> # 5.17+ Acked-by: Heiko Carstens <[email protected]> Signed-off-by: Gerald Schaefer <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Sven Schnelle <[email protected]> Date: Tue Aug 15 09:26:06 2023 +0200 s390/ipl: add missing secure/has_secure file to ipl type 'unknown' commit ea5717cb13468323a7c3dd394748301802991f39 upstream. OS installers are relying on /sys/firmware/ipl/has_secure to be present on machines supporting secure boot. This file is present for all IPL types, but not the unknown type, which prevents a secure installation when an LPAR is booted in HMC via FTP(s), because this is an unknown IPL type in linux. While at it, also add the secure file. Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute") Cc: [email protected] Signed-off-by: Sven Schnelle <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Holger Dengler <[email protected]> Date: Wed Aug 9 14:23:45 2023 +0200 s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs [ Upstream commit cba33db3fc4dbf2e54294b0e499d2335a3a00d78 ] Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a supplement to the PKEY_TYPE_EP11 (which won't work in environments with session-bound keys). This new keyblobs has a different maximum size, so fix paes crypto module to accept also these larger keyblobs. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <[email protected]> Reviewed-by: Ingo Franzki <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Holger Dengler <[email protected]> Date: Fri Aug 4 16:02:58 2023 +0200 s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes [ Upstream commit b9352e4b9b9eff949bcc6907b8569b3a1d992f1e ] Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as a supplement to the existing PKEY_TYPE_EP11 (which won't work in environments with session-bound keys). The pkey EP11 securekey attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11) keyblobs, to make the generated keyblobs usable also in environments, where session-bound keys are required. There should be no negative impacts to userspace because the internal structure of the keyblobs is opaque. The increased size of the generated keyblobs is reflected by the changed size of the attributes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <[email protected]> Reviewed-by: Ingo Franzki <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Holger Dengler <[email protected]> Date: Tue Jul 25 09:49:55 2023 +0200 s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_GENSECK2 IOCTL [ Upstream commit fb249ce7f7bfd8621a38e4ad401ba74b680786d4 ] Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2 IOCTL, to enable userspace to generate securekey blobs of this type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can generate securekey blobs of this type. The start of the header and the keyblob, as well as the length need special handling, depending on the internal keyversion. Add a helper function that splits an uninitialized buffer into start and size of the header as well as start and size of the payload, depending on the requested keyversion. Do the header-related calculations and the raw genkey request handling in separate functions. Use the raw genkey request function for internal purposes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <[email protected]> Reviewed-by: Ingo Franzki <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Holger Dengler <[email protected]> Date: Wed Jul 26 11:33:45 2023 +0200 s390/pkey: fix/harmonize internal keyblob headers [ Upstream commit 37a08f010b7c423b5e4c9ed3b187d21166553007 ] Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to PKEY_TYPE_EP11. All pkeys have an internal header/payload structure, which is opaque to the userspace. The header structures for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there is no reason, why different structures are used. In preparation to fix the keyversion handling in the broken PKEY IOCTLs, the same header structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This reduces the number of different code paths and increases the readability. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <[email protected]> Reviewed-by: Ingo Franzki <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel T. Lee <[email protected]> Date: Fri Aug 18 18:01:16 2023 +0900 samples/bpf: fix bio latency check with tracepoint [ Upstream commit 92632115fb57ff9e368f256913e96d6fd5abf5ab ] Recently, a new tracepoint for the block layer, specifically the block_io_start/done tracepoints, was introduced in commit 5a80bd075f3b ("block: introduce block_io_start/block_io_done tracepoints"). Previously, the kprobe entry used for this purpose was quite unstable and inherently broke relevant probes [1]. Now that a stable tracepoint is available, this commit replaces the bio latency check with it. One of the changes made during this replacement is the key used for the hash table. Since 'struct request' cannot be used as a hash key, the approach taken follows that which was implemented in bcc/biolatency [2]. (uses dev:sector for the key) [1]: https://github.com/iovisor/bcc/issues/4261 [2]: https://github.com/iovisor/bcc/pull/4691 Fixes: 450b7879e345 ("block: move blk_account_io_{start,done} to blk-mq.c") Signed-off-by: Daniel T. Lee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel T. Lee <[email protected]> Date: Fri Aug 18 18:01:17 2023 +0900 samples/bpf: fix broken map lookup probe [ Upstream commit d93a7cf6ca2cfcd7de5d06f753ce8d5e863316ac ] In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock"), a potential deadlock issue was addressed, which resulted in *_map_lookup_elem not triggering BPF programs. (prior to lookup, bpf_disable_instrumentation() is used) To resolve the broken map lookup probe using "htab_map_lookup_elem", this commit introduces an alternative approach. Instead, it utilize "bpf_map_copy_value" and apply a filter specifically for the hash table with map_type. Signed-off-by: Daniel T. Lee <[email protected]> Fixes: 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Randy Dunlap <[email protected]> Date: Sun Jul 30 20:07:40 2023 -0700 sched/psi: Select KERNFS as needed [ Upstream commit 98dfdd9ee93995a408192dbbf3dd219ba23e3738 ] Users of KERNFS should select it to enforce its being built, so do this to prevent a build error. In file included from ../kernel/sched/build_utility.c:97: ../kernel/sched/psi.c: In function 'psi_trigger_poll': ../kernel/sched/psi.c:1479:17: error: implicit declaration of function 'kernfs_generic_poll' [-Werror=implicit-function-declaration] 1479 | kernfs_generic_poll(t->of, wait); Fixes: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling") Reported-by: kernel test robot <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Suren Baghdasaryan <[email protected]> Link: lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Cyril Hrubis <[email protected]> Date: Wed Aug 2 17:19:05 2023 +0200 sched/rt: Fix sysctl_sched_rr_timeslice intial value [ Upstream commit c7fcb99877f9f542c918509b2801065adcaf46fa ] There is a 10% rounding error in the intial value of the sysctl_sched_rr_timeslice with CONFIG_HZ_300=y. This was found with LTP test sched_rr_get_interval01: sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90 sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90 What this test does is to compare the return value from the sched_rr_get_interval() and the sched_rr_timeslice_ms sysctl file and fails if they do not match. The problem it found is the intial sysctl file value which was computed as: static int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE; which works fine as long as MSEC_PER_SEC is multiple of HZ, however it introduces 10% rounding error for CONFIG_HZ_300: (MSEC_PER_SEC / HZ) * (100 * HZ / 1000) (1000 / 300) * (100 * 300 / 1000) 3 * 30 = 90 This can be easily fixed by reversing the order of the multiplication and division. After this fix we get: (MSEC_PER_SEC * (100 * HZ / 1000)) / HZ (1000 * (100 * 300 / 1000)) / 300 (1000 * 30) / 300 = 100 Fixes: 975e155ed873 ("sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds") Signed-off-by: Cyril Hrubis <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Petr Vorel <[email protected]> Acked-by: Mel Gorman <[email protected]> Tested-by: Petr Vorel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Sagar Biradar <[email protected]> Date: Fri May 19 16:08:34 2023 -0700 scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity [ Upstream commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e ] Fix the I/O hang that arises because of the MSIx vector not having a mapped online CPU upon receiving completion. SCSI cmds take the blk_mq route, which is setup during init. Reserved cmds fetch the vector_no from mq_map after init is complete. Before init, they have to use 0 - as per the norm. Reviewed-by: Gilbert Wu <[email protected]> Signed-off-by: Sagar Biradar <[email protected]> Reviewed-by: John Garry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Sun Jul 23 15:59:38 2023 +0800 scsi: be2iscsi: Add length check when parsing nlattrs [ Upstream commit ee0268f230f66cb472df3424f380ea668da2749a ] beiscsi_iface_set_param() parses nlattr with nla_for_each_attr and assumes every attributes can be viewed as struct iscsi_iface_param_info. This is not true because there is no any nla_policy to validate the attributes passed from the upper function iscsi_set_iface_params(). Add the nla_len check before accessing the nlattr data and return EINVAL if the length check fails. Fixes: 0e43895ec1f4 ("[SCSI] be2iscsi: adding functionality to change network settings using iscsiadm") Signed-off-by: Lin Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Chris Leech <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bart Van Assche <[email protected]> Date: Fri Jul 21 09:01:32 2023 -0700 scsi: core: Fix the scsi_set_resid() documentation commit f669b8a683e4ee26fa5cafe19d71cec1786b556a upstream. Because scsi_finish_command() subtracts the residual from the buffer length, residual overflows must not be reported. Reflect this in the SCSI documentation. See also commit 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface") Cc: Damien Le Moal <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Douglas Gilbert <[email protected]> Cc: [email protected] Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tony Battersby <[email protected]> Date: Mon Aug 14 10:03:25 2023 -0400 scsi: core: Use 32-bit hostnum in scsi_host_lookup() [ Upstream commit 62ec2092095b678ff89ce4ba51c2938cd1e8e630 ] Change scsi_host_lookup() hostnum argument type from unsigned short to unsigned int to match the type used everywhere else. Fixes: 6d49f63b415c ("[SCSI] Make host_no an unsigned int") Signed-off-by: Tony Battersby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chengfeng Ye <[email protected]> Date: Thu Aug 17 07:47:08 2023 +0000 scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock [ Upstream commit 1a1975551943f681772720f639ff42fbaa746212 ] There is a long call chain that &fip->ctlr_lock is acquired by isr fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context code acquiring the lock should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU. [ISR] fnic_isr_msix_wq_copy() -> fnic_wq_copy_cmpl_handler() -> fnic_fcpio_cmpl_handler() -> fnic_fcpio_flogi_reg_cmpl_handler() -> fnic_flush_tx() -> fnic_send_frame() -> fcoe_ctlr_els_send() -> spin_lock_bh(&fip->ctlr_lock) [Process Context] 1. fcoe_ctlr_timer_work() -> fcoe_ctlr_flogi_send() -> spin_lock_bh(&fip->ctlr_lock) 2. fcoe_ctlr_recv_work() -> fcoe_ctlr_recv_handler() -> fcoe_ctlr_recv_els() -> fcoe_ctlr_announce() -> spin_lock_bh(&fip->ctlr_lock) 3. fcoe_ctlr_recv_work() -> fcoe_ctlr_recv_handler() -> fcoe_ctlr_recv_els() -> fcoe_ctlr_flogi_retry() -> spin_lock_bh(&fip->ctlr_lock) 4. -> fcoe_xmit() -> fcoe_ctlr_els_send() -> spin_lock_bh(&fip->ctlr_lock) spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a hardirq. These flaws were found by an experimental static analysis tool I am developing for irq-related deadlock. The patch fix the potential deadlocks by spin_lock_irqsave() to disable hard irq. Fixes: 794d98e77f59 ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible") Signed-off-by: Chengfeng Ye <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Davidlohr Bueso <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xingui Yang <[email protected]> Date: Tue Jul 11 11:14:58 2023 +0800 scsi: hisi_sas: Fix normally completed I/O analysed as failed [ Upstream commit f5393a5602cacfda2014e0ff8220e5a7564e7cd1 ] The PIO read command has no response frame and the struct iu[1024] won't be filled. I/Os which are normally completed will be treated as failed in sas_ata_task_done() when iu contains abnormal dirty data. Consequently ending_fis should not be filled by iu when the response frame hasn't been written to memory. Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep") Signed-off-by: Xingui Yang <[email protected]> Signed-off-by: Xiang Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xingui Yang <[email protected]> Date: Mon May 15 10:41:21 2023 +0800 scsi: hisi_sas: Fix warnings detected by sparse [ Upstream commit c0328cc595124579328462fc45d7a29a084cf357 ] This patch fixes the following warning: drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:2168:43: sparse: sparse: restricted __le32 degrades to integer Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Xingui Yang <[email protected]> Signed-off-by: Xiang Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Stable-dep-of: f5393a5602ca ("scsi: hisi_sas: Fix normally completed I/O analysed as failed") Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Tue Jul 25 10:45:29 2023 +0800 scsi: iscsi: Add length check for nlattr payload [ Upstream commit 971dfcb74a800047952f5288512b9c7ddedb050a ] The current NETLINK_ISCSI netlink parsing loop checks every nlmsg to make sure the length is bigger than sizeof(struct iscsi_uevent) and then calls iscsi_if_recv_msg(). nlh = nlmsg_hdr(skb); if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) || skb->len < nlh->nlmsg_len) { break; } ... err = iscsi_if_recv_msg(skb, nlh, &group); Hence, in iscsi_if_recv_msg() the nlmsg_data can be safely converted to iscsi_uevent as the length is already checked. However, in other cases the length of nlattr payload is not checked before the payload is converted to other data structures. One example is iscsi_set_path() which converts the payload to type iscsi_path without any checks: params = (struct iscsi_path *)((char *)ev + sizeof(*ev)); Whereas iscsi_if_transport_conn() correctly checks the pdu_len: pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev); if ((ev->u.send_pdu.hdr_size > pdu_len) .. err = -EINVAL; To sum up, some code paths called in iscsi_if_recv_msg() do not check the length of the data (see below picture) and directly convert the data to another data structure. This could result in an out-of-bound reads and heap dirty data leakage. _________ nlmsg_len(nlh) _______________ / \ +----------+--------------+---------------------------+ | nlmsghdr | iscsi_uevent | data | +----------+--------------+---------------------------+ \ / iscsi_uevent->u.set_param.len Fix the issue by adding the length check before accessing it. To clean up the code, an additional parameter named rlen is added. The rlen is calculated at the beginning of iscsi_if_recv_msg() which avoids duplicated calculation. Fixes: ac20c7bf070d ("[SCSI] iscsi_transport: Added Ping support") Fixes: 43514774ff40 ("[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.") Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event") Fixes: 01cb225dad8d ("[SCSI] iscsi: add target discvery event to transport class") Fixes: 264faaaa1254 ("[SCSI] iscsi: add transport end point callbacks") Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up") Signed-off-by: Lin Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Chris Leech <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Sun Jul 23 15:58:20 2023 +0800 scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param() [ Upstream commit ce51c817008450ef4188471db31639d42d37a5e1 ] The functions iscsi_if_set_param() and iscsi_if_set_host_param() convert an nlattr payload to type char* and then call C string handling functions like sscanf and kstrdup: char *data = (char*)ev + sizeof(*ev); ... sscanf(data, "%d", &value); However, since the nlattr is provided by the user-space program and the nlmsg skb is allocated with GFP_KERNEL instead of GFP_ZERO flag (see netlink_alloc_large_skb() in netlink_sendmsg()), dirty data on the heap can lead to an OOB access for those string handling functions. By investigating how the bug is introduced, we find it is really interesting as the old version parsing code starting from commit fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up") treated the nlattr as integer bytes instead of string and had length check in iscsi_copy_param(): if (ev->u.set_param.len != sizeof(uint32_t)) BUG(); But, since the commit a54a52caad4b ("[SCSI] iscsi: fixup set/get param functions"), the code treated the nlattr as C string while forgetting to add any strlen checks(), opening the possibility of an OOB access. Fix the potential OOB by adding the strlen() check before accessing the buf. If the data passes this check, all low-level set_param handlers can safely treat this buf as legal C string. Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up") Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event") Signed-off-by: Lin Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Chris Leech <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Wenchao Hao <[email protected]> Date: Tue Nov 22 18:11:05 2022 +0000 scsi: iscsi: Rename iscsi_set_param() to iscsi_if_set_param() [ Upstream commit 0c26a2d7c98039e913e63f9250fde738a3f88a60 ] There are two iscsi_set_param() functions defined in libiscsi.c and scsi_transport_iscsi.c respectively which is confusing. Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param(). Signed-off-by: Wenchao Hao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Reviewed-by: Lee Duncan <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Stable-dep-of: 971dfcb74a80 ("scsi: iscsi: Add length check for nlattr payload") Signed-off-by: Sasha Levin <[email protected]>
Author: Justin Tee <[email protected]> Date: Wed Jun 14 10:59:44 2023 -0700 scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path [ Upstream commit 9cefd6e7e0a77b0fbca5c793f6fb6821b0962775 ] The kernel test robot reported sparse warnings regarding incorrect type assignment for __be16 variables in bsg loopback path. Change the flagged lines to use the be16_to_cpu() and cpu_to_be16() macros appropriately. Signed-off-by: Justin Tee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Justin Tee <[email protected]> Date: Thu Aug 3 14:19:32 2023 -0700 scsi: lpfc: Remove reftag check in DIF paths [ Upstream commit 8eebf0e84f0614cebc7347f7bbccba4056d77d42 ] When preparing protection DIF I/O for DMA, the driver obtains reference tags from scsi_prot_ref_tag(). Previously, there was a wrong assumption that an all 0xffffffff value meant error and thus the driver failed the I/O. This patch removes the evaluation code and accepts whatever the upper layer returns. Signed-off-by: Justin Tee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ranjan Kumar <[email protected]> Date: Tue Aug 29 14:30:19 2023 +0530 scsi: mpt3sas: Perform additional retries if doorbell read returns 0 commit 4ca10f3e31745d35249a727ecd108eb58f0a8c5e upstream. The driver retries certain register reads 3 times if the returned value is 0. This was done because the controller could return 0 for certain registers if other registers were being accessed concurrently by the BMC. In certain systems with increased BMC interactions, the register values returned can be 0 for longer than 3 retries. Change the retry count from 3 to 30 for the affected registers to prevent problems with out-of-band management. Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads") Cc: [email protected] Signed-off-by: Ranjan Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Oleksandr Natalenko <[email protected]> Date: Mon Jul 31 10:40:33 2023 +0200 scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly [ Upstream commit 31b5991a9a91ba97237ac9da509d78eec453ff72 ] The qedf_dbg_debug_cmd_read() function invokes sprintf() directly on a __user pointer, which may crash the kernel. Avoid doing that by using a small on-stack buffer for scnprintf() and then calling simple_read_from_buffer() which does a proper copy_to_user() call. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/linux-scsi/[email protected]/ Cc: Saurav Kashyap <[email protected]> Cc: Rob Evers <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: David Laight <[email protected]> Cc: Jozef Bacik <[email protected]> Cc: Laurence Oberman <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Laurence Oberman <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Tested-by: Laurence Oberman <[email protected]> Acked-by: Saurav Kashyap <[email protected]> Signed-off-by: Oleksandr Natalenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oleksandr Natalenko <[email protected]> Date: Mon Jul 31 10:40:34 2023 +0200 scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly [ Upstream commit 25dbc20deab5165f847b4eb42f376f725a986ee8 ] The qedf_dbg_fp_int_cmd_read() function invokes sprintf() directly on a __user pointer, which may crash the kernel. Avoid doing that by vmalloc()'ating a buffer for scnprintf() and then calling simple_read_from_buffer() which does a proper copy_to_user() call. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/linux-scsi/[email protected]/ Cc: Saurav Kashyap <[email protected]> Cc: Rob Evers <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: David Laight <[email protected]> Cc: Jozef Bacik <[email protected]> Cc: Laurence Oberman <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Laurence Oberman <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Tested-by: Laurence Oberman <[email protected]> Acked-by: Saurav Kashyap <[email protected]> Signed-off-by: Oleksandr Natalenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Oleksandr Natalenko <[email protected]> Date: Mon Jul 31 10:40:32 2023 +0200 scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly [ Upstream commit 7d3d20dee4f648ec44e9717d5f647d594d184433 ] The qedf_dbg_stop_io_on_error_cmd_read() function invokes sprintf() directly on a __user pointer, which may crash the kernel. Avoid doing that by using a small on-stack buffer for scnprintf() and then calling simple_read_from_buffer() which does a proper copy_to_user() call. Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/linux-scsi/[email protected]/ Cc: Saurav Kashyap <[email protected]> Cc: Rob Evers <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: David Laight <[email protected]> Cc: Jozef Bacik <[email protected]> Cc: Laurence Oberman <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Laurence Oberman <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Tested-by: Laurence Oberman <[email protected]> Acked-by: Saurav Kashyap <[email protected]> Signed-off-by: Oleksandr Natalenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chengfeng Ye <[email protected]> Date: Wed Jul 26 12:56:55 2023 +0000 scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock [ Upstream commit dd64f80587190265ca8a0f4be6c64c2fda6d3ac2 ] As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(), other acquisitions of the same lock under process context should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU. qedi_cpu_offline() is one such function which acquires the lock in process context. [Deadlock Scenario] qedi_cpu_offline() ->spin_lock(&p->p_work_lock) <irq> ->qedi_msix_handler() ->edi_process_completions() ->spin_lock_irqsave(&p->p_work_lock, flags); (deadlock here) This flaw was found by an experimental static analysis tool I am developing for IRQ-related deadlocks. The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context. Signed-off-by: Chengfeng Ye <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Manish Rangankar <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Sun Jul 23 16:00:53 2023 +0800 scsi: qla4xxx: Add length check when parsing nlattrs [ Upstream commit 47cd3770e31df942e2bb925a9a855c79ed0662eb ] There are three places that qla4xxx parses nlattrs: - qla4xxx_set_chap_entry() - qla4xxx_iface_set_param() - qla4xxx_sysfs_ddb_set_param() and each of them directly converts the nlattr to specific pointer of structure without length checking. This could be dangerous as those attributes are not validated and a malformed nlattr (e.g., length 0) could result in an OOB read that leaks heap dirty data. Add the nla_len check before accessing the nlattr data and return EINVAL if the length check fails. Fixes: 26ffd7b45fe9 ("[SCSI] qla4xxx: Add support to set CHAP entries") Fixes: 1e9e2be3ee03 ("[SCSI] qla4xxx: Add flash node mgmt support") Fixes: 00c31889f751 ("[SCSI] qla4xxx: fix data alignment and use nl helpers") Signed-off-by: Lin Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Chris Leech <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bart Van Assche <[email protected]> Date: Mon Jul 24 13:08:30 2023 -0700 scsi: RDMA/srp: Fix residual handling [ Upstream commit 89e637c19b2441aabc8dbf22a8745b932fd6996e ] Although the code for residual handling in the SRP initiator follows the SCSI documentation, that documentation has never been correct. Because scsi_finish_command() starts from the data buffer length and subtracts the residual, scsi_set_resid() must not be called if a residual overflow occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a residual overflow occurrs. Cc: Leon Romanovsky <[email protected]> Cc: Jason Gunthorpe <[email protected]> Fixes: 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface") Fixes: e714531a349f ("IB/srp: Fix residual handling") Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Leon Romanovsky <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Michael Kelley <[email protected]> Date: Fri Jun 9 13:38:21 2023 -0700 scsi: storvsc: Always set no_report_opcodes [ Upstream commit 31d16e712bdcaee769de4780f72ff8d6cd3f0589 ] Hyper-V synthetic SCSI devices do not support the MAINTENANCE_IN SCSI command, so scsi_report_opcode() always fails, resulting in messages like this: hv_storvsc <guid>: tag#205 cmd 0xa3 status: scsi 0x2 srb 0x86 hv 0xc0000001 The recently added support for command duration limits calls scsi_report_opcode() four times as each device comes online, which significantly increases the number of messages logged in a system with many disks. Fix the problem by always marking Hyper-V synthetic SCSI devices as not supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI command is not issued and no messages are logged. Signed-off-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bart Van Assche <[email protected]> Date: Tue Oct 18 13:29:55 2022 -0700 scsi: ufs: Try harder to change the power mode [ Upstream commit 579a4e9dbd53978cad8df88dc612837cdd210ce0 ] Instead of only retrying the START STOP UNIT command if a unit attention is reported, repeat it if any SCSI error is reported by the device or if the command timed out. Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Stable-dep-of: fe8637f7708c ("scsi: ufs: core: Increase the START STOP UNIT timeout from one to ten seconds") Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Fri Jun 9 14:04:43 2023 +0300 sctp: handle invalid error codes without calling BUG() [ Upstream commit a0067dfcd9418fd3b0632bc59210d120d038a9c6 ] The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM. This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead. This code predates git. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christian Göttsche <[email protected]> Date: Thu May 11 14:32:52 2023 +0200 security: keys: perform capable check only on privileged operations [ Upstream commit 2d7f105edbb3b2be5ffa4d833abbf9b6965e9ce7 ] If the current task fails the check for the queried capability via `capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message. Issuing such denial messages unnecessarily can lead to a policy author granting more privileges to a subject than needed to silence them. Reorder CAP_SYS_ADMIN checks after the check whether the operation is actually privileged. Signed-off-by: Christian Göttsche <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yipeng Zou <[email protected]> Date: Mon Aug 14 11:07:27 2023 +0800 selftests/bpf: Clean up fmod_ret in bench_rename test script [ Upstream commit 83a89c4b6ae93481d3f618aba6a29d89208d26ed ] Running the bench_rename test script, the following error occurs: # ./benchs/run_bench_rename.sh base : 0.819 ± 0.012M/s kprobe : 0.538 ± 0.009M/s kretprobe : 0.503 ± 0.004M/s rawtp : 0.779 ± 0.020M/s fentry : 0.726 ± 0.007M/s fexit : 0.691 ± 0.007M/s benchmark 'rename-fmodret' not found The bench_rename_fmodret has been removed in commit b000def2e052 ("selftests: Remove fmod_ret from test_overhead"), thus remove it from the runners in the test script. Fixes: b000def2e052 ("selftests: Remove fmod_ret from test_overhead") Signed-off-by: Yipeng Zou <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Daniel Borkmann <[email protected]> Date: Mon Jun 26 15:19:42 2023 +0200 selftests/bpf: Fix bpf_nf failure upon test rerun [ Upstream commit 17e8e5d6e09adb4b4f4fb5c89b3ec3fcae2c64a6 ] Alexei reported: After fast forwarding bpf-next today bpf_nf test started to fail when run twice: $ ./test_progs -t bpf_nf #17 bpf_nf:OK Summary: 1/10 PASSED, 0 SKIPPED, 0 FAILED $ ./test_progs -t bpf_nf All error logs: test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK --set-mark 42/0 0 nsec (network_helpers.c:102: errno: Address already in use) Failed to bind socket test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0 #17/1 bpf_nf/xdp-ct:FAIL test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK --set-mark 42/0 0 nsec (network_helpers.c:102: errno: Address already in use) Failed to bind socket test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0 #17/2 bpf_nf/tc-bpf-ct:FAIL #17 bpf_nf:FAIL Summary: 0/8 PASSED, 0 SKIPPED, 1 FAILED I was able to locally reproduce as well. Rearrange the connection teardown so that the client closes its connection first so that we don't need to linger in TCP time-wait. Fixes: e81fbd4c1ba7 ("selftests/bpf: Add existing connection bpf_*_ct_lookup() test") Reported-by: Alexei Starovoitov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/CAADnVQ+0dnDq_v_vH1EfkacbfGnHANaon7zsw10pMb-D9FS0Pw@mail.gmail.com Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Yipeng Zou <[email protected]> Date: Mon Aug 14 11:14:34 2023 +0800 selftests/bpf: Fix repeat option when kfunc_call verification fails [ Upstream commit 811915db674f8daf19bb4fcb67da9017235ce26d ] There is no way where topts.repeat can be set to 1 when tc_test fails. Fix the typo where the break statement slipped by one line. Fixes: fb66223a244f ("selftests/bpf: add test for accessing ctx from syscall program type") Signed-off-by: Yipeng Zou <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Li Zetao <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Alan Maguire <[email protected]> Date: Wed Aug 2 08:39:06 2023 +0100 selftests/bpf: fix static assert compilation issue for test_cls_*.c [ Upstream commit 416c6d01244ecbf0abfdb898fd091b50ef951b48 ] commit bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE") ...was backported to stable trees such as 5.15. The problem is that with older LLVM/clang (14/15) - which is often used for older kernels - we see compilation failures in BPF selftests now: In file included from progs/test_cls_redirect_subprogs.c:2: progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression sizeof(flow_ports_t) != ^~~~~~~~~~~~~~~~~~~~~~~ progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression offsetofend(struct bpf_sock_tuple, ipv4.dport) - ^ progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend' (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER))) ^ tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof' ^ In file included from progs/test_cls_redirect_subprogs.c:2: progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression sizeof(flow_ports_t) != ^~~~~~~~~~~~~~~~~~~~~~~ progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression offsetofend(struct bpf_sock_tuple, ipv6.dport) - ^ progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend' (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER))) ^ tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof' ^ 2 errors generated. make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1 The problem is the new offsetof() does not play nice with static asserts. Given that the context is a static assert (and CO-RE relocation is not needed at compile time), offsetof() usage can be replaced by restoring the original offsetof() definition as __builtin_offsetof(). Fixes: bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE") Reported-by: Colm Harrington <[email protected]> Signed-off-by: Alan Maguire <[email protected]> Tested-by: Yipeng Zou <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nysal Jan K.A <[email protected]> Date: Mon Aug 14 13:39:27 2023 +0530 selftests/futex: Order calls to futex_lock_pi [ Upstream commit fbf4dec702774286db409815ffb077711a96b824 ] Observed occassional failures in the futex_wait_timeout test: ok 1 futex_wait relative succeeds ok 2 futex_wait_bitset realtime succeeds ok 3 futex_wait_bitset monotonic succeeds ok 4 futex_wait_requeue_pi realtime succeeds ok 5 futex_wait_requeue_pi monotonic succeeds not ok 6 futex_lock_pi realtime returned 0 ...... The test expects the child thread to complete some steps before the parent thread gets to run. There is an implicit expectation of the order of invocation of futex_lock_pi between the child thread and the parent thread. Make this order explicit. If the order is not met, the futex_lock_pi call in the parent thread succeeds and will not timeout. Fixes: f4addd54b161 ("selftests: futex: Expand timeout test") Signed-off-by: Nysal Jan K.A <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kees Cook <[email protected]> Date: Mon Aug 7 10:43:58 2023 -0700 selftests/harness: Actually report SKIP for signal tests [ Upstream commit b3d46e11fec0c5a8972e5061bb1462119ae5736d ] Tests that were expecting a signal were not correctly checking for a SKIP condition. Move the check before the signal checking when processing test result. Cc: Shuah Khan <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Will Drewry <[email protected]> Cc: [email protected] Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 16:14:49 2023 +0300 selftests/resctrl: Add resctrl.h into build deps [ Upstream commit 8e289f4542890168705219e54f0231dccfabddbe ] Makefile only lists *.c as build dependencies for the resctrl_tests executable which excludes resctrl.h. Add *.h to wildcard() to include resctrl.h. Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data") Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Tested-by: Babu Moger <[email protected]> Tested-by: Shaopeng Tan (Fujitsu) <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 16:14:52 2023 +0300 selftests/resctrl: Close perf value read fd on errors [ Upstream commit 51a0c3b7f028169e40db930575dd01fe81c3e765 ] Perf event fd (fd_lm) is not closed when run_fill_buf() returns error. Close fd_lm only in cat_val() to make it easier to track it is always closed. Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest") Signed-off-by: Ilpo Järvinen <[email protected]> Tested-by: Babu Moger <[email protected]> Tested-by: Shaopeng Tan (Fujitsu) <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 16:14:50 2023 +0300 selftests/resctrl: Don't leak buffer in fill_cache() [ Upstream commit 2d320b1029ee7329ee0638181be967789775b962 ] The error path in fill_cache() does return before the allocated buffer is freed leaking the buffer. The leak was introduced when fill_cache_read() started to return errors in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed"), before that both fill functions always returned 0. Move free() earlier to prevent the mem leak. Fixes: c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed") Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Tested-by: Babu Moger <[email protected]> Tested-by: Shaopeng Tan (Fujitsu) <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 16:14:51 2023 +0300 selftests/resctrl: Unmount resctrl FS if child fails to run benchmark [ Upstream commit f99e413eb54652e2436cc56d081176bc9a34cd8d ] A child calls PARENT_EXIT() when it fails to run a benchmark to kill the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and the parent won't be there to unmount it either after it gets killed. Add the resctrl FS unmount also to PARENT_EXIT(). Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data") Signed-off-by: Ilpo Järvinen <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Tested-by: Babu Moger <[email protected]> Tested-by: Shaopeng Tan (Fujitsu) <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hugo Villeneuve <[email protected]> Date: Mon Aug 7 17:45:54 2023 -0400 serial: sc16is7xx: fix regression with GPIO configuration [ Upstream commit 0499942928341d572a42199580433c2b0725211e ] Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "nxp,modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new DT property. Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: [email protected] Signed-off-by: Hugo Villeneuve <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Lech Perczak <[email protected]> Tested-by: Lech Perczak <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hugo Villeneuve <[email protected]> Date: Mon Aug 7 17:45:52 2023 -0400 serial: sc16is7xx: remove obsolete out_thread label [ Upstream commit dabc54a45711fe77674a6c0348231e00e66bd567 ] Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") moved GPIO setup code later in probe function. Doing so also required to move ports cleanup code (out_ports label) after the GPIO cleanup code. After these moves, the out_thread label becomes misplaced and makes part of the cleanup code illogical. This patch remove the now obsolete out_thread label and make GPIO setup code jump to out_ports label if it fails. Signed-off-by: Hugo Villeneuve <[email protected]> Reviewed-by: Lech Perczak <[email protected]> Tested-by: Lech Perczak <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 049994292834 ("serial: sc16is7xx: fix regression with GPIO configuration") Signed-off-by: Sasha Levin <[email protected]>
Author: Chunyan Zhang <[email protected]> Date: Tue Jul 25 14:40:52 2023 +0800 serial: sprd: Assign sprd_port after initialized to avoid wrong access [ Upstream commit f9608f1887568b728839d006024585ab02ef29e5 ] The global pointer 'sprd_port' may not zero when sprd_probe returns failure, that is a risk for sprd_port to be accessed afterward, and may lead to unexpected errors. For example: There are two UART ports, UART1 is used for console and configured in kernel command line, i.e. "console="; The UART1 probe failed and the memory allocated to sprd_port[1] was released, but sprd_port[1] was not set to NULL; In UART2 probe, the same virtual address was allocated to sprd_port[2], and UART2 probe process finally will go into sprd_console_setup() to register UART1 as console since it is configured as preferred console (filled to console_cmdline[]), but the console parameters (sprd_port[1]) belong to UART2. So move the sprd_port[] assignment to where the port already initialized can avoid the above issue. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chunyan Zhang <[email protected]> Date: Tue Jul 25 14:40:53 2023 +0800 serial: sprd: Fix DMA buffer leak issue [ Upstream commit cd119fdc3ee1450fbf7f78862b5de44c42b6e47f ] Release DMA buffer when _probe() returns failure to avoid memory leak. Fixes: f4487db58eb7 ("serial: sprd: Add DMA mode support") Signed-off-by: Chunyan Zhang <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yi Yang <[email protected]> Date: Thu Aug 17 18:54:06 2023 +0800 serial: tegra: handle clk prepare error in tegra_uart_hw_init() [ Upstream commit 5abd01145d0cc6cd1b7c2fe6ee0b9ea0fa13671e ] In tegra_uart_hw_init(), the return value of clk_prepare_enable() should be checked since it might fail. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Signed-off-by: Yi Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alex Austin <[email protected]> Date: Thu Aug 24 17:46:57 2023 +0100 sfc: Check firmware supports Ethernet PTP filter [ Upstream commit c4413a20fa6d7c4888009fb7dd391685f196cd36 ] Not all firmware variants support RSS filters. Do not fail all PTP functionality when raw ethernet PTP filters fail to insert. Fixes: e4616f64726b ("sfc: support PTP over Ethernet") Signed-off-by: Alex Austin <[email protected]> Acked-by: Edward Cree <[email protected]> Reviewed-by: Pieter Jansen van Vuuren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mohamed Khalfella <[email protected]> Date: Thu Aug 31 02:17:02 2023 -0600 skbuff: skb_segment, Call zero copy functions before using skbuff frags commit 2ea35288c83b3d501a88bc17f2df8f176b5cc96f upstream. Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <[email protected]> Reported-by: Amit Goyal <[email protected]> Cc: [email protected] Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Thu Jul 6 08:52:39 2023 +0300 smackfs: Prevent underflow in smk_set_cipso() [ Upstream commit 3ad49d37cf5759c3b8b68d02e3563f633d9c1aee ] There is a upper bound to "catlen" but no lower bound to prevent negatives. I don't see that this necessarily causes a problem but we may as well be safe. Fixes: e114e473771c ("Smack: Simplified Mandatory Access Control Kernel") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Casey Schaufler <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Luca Weiss <[email protected]> Date: Mon May 29 10:41:15 2023 +0200 soc: qcom: ocmem: Add OCMEM hardware version print [ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ] It might be useful to know what hardware version of the OCMEM block the SoC contains. Add a debug print for that. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros") Signed-off-by: Sasha Levin <[email protected]>
Author: Luca Weiss <[email protected]> Date: Wed Jun 14 18:35:47 2023 +0200 soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros [ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ] Since we're using these two macros to read a value from a register, we need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise we're getting wrong values. So instead of: [ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved we now get the correct value of: [ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Reviewed-by: Caleb Connolly <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chen Jiahao <[email protected]> Date: Tue Aug 1 17:48:07 2023 +0800 soc: qcom: smem: Fix incompatible types in comparison [ Upstream commit 5f908786cf44fcb397cfe0f322ef2f41b0909e2a ] This patch fixes the following sparse error: drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add ress spaces): drivers/soc/qcom/smem.c:738:30: void * drivers/soc/qcom/smem.c:738:30: void [noderef] __iomem * In addr_in_range(), "base" is of type void __iomem *, converting void *addr to the same type to fix above sparse error. Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST") Signed-off-by: Chen Jiahao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Shurong <[email protected]> Date: Sat Jul 22 23:49:09 2023 +0800 spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe() [ Upstream commit 29a449e765ff70a5bd533be94babb6d36985d096 ] The platform_get_irq might be failed and return a negative result. So there should have an error handling code. Fixed this by adding an error handling code. Fixes: 8528547bcc33 ("spi: tegra: add spi driver for sflash controller") Signed-off-by: Zhang Shurong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Raphael Gallais-Pou <[email protected]> Date: Tue Jul 18 19:20:24 2023 +0200 staging: fbtft: ili9341: use macro FBTFT_REGISTER_SPI_DRIVER [ Upstream commit 4912649e1cf0317bf563f91655e04a303cacaf8d ] Using FBTFT_REGISTER_DRIVER resolves to a NULL struct spi_device_id. This ultimately causes a warning when the module probes. Fixes it. Signed-off-by: Raphael Gallais-Pou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Jul 18 16:20:49 2023 +0000 tcp: tcp_enter_quickack_mode() should be static [ Upstream commit 03b123debcbc8db987bda17ed8412cc011064c22 ] After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"), tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c. Fixes: d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP") Signed-off-by: Eric Dumazet <[email protected]> Cc: Yuchung Cheng <[email protected]> Cc: Neal Cardwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peng Fan <[email protected]> Date: Wed Jul 19 09:16:36 2023 +0800 thermal/of: Fix potential uninitialized value access [ Upstream commit f96801f0cfcefc0a16b146596577c53c75ee9773 ] If of_parse_phandle_with_args() called from __thermal_of_bind() or __thermal_of_unbind() fails, cooling_spec.np will not be initialized, so move the of_node_put() calls below the respective return value checks to avoid dereferencing an uninitialized pointer. Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Peng Fan <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Paul Gortmaker <[email protected]> Date: Fri Aug 18 16:07:57 2023 -0400 tick/rcu: Fix false positive "softirq work is pending" messages [ Upstream commit 96c1fa04f089a7e977a44e4e8fdc92e81be20bef ] In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the new function report_idle_softirq() was created by breaking code out of the existing can_stop_idle_tick() for kernels v5.18 and newer. In doing so, the code essentially went from a one conditional: if (a && b && c) warn(); to a three conditional: if (!a) return; if (!b) return; if (!c) return; warn(); But that conversion got the condition for the RT specific local_bh_blocked() wrong. The original condition was: !local_bh_blocked() but the conversion failed to negate it so it ended up as: if (!local_bh_blocked()) return false; This issue lay dormant until another fixup for the same commit was added in commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition"). This commit realized the ratelimit was essentially set to zero instead of ten, and hence *no* softirq pending messages would ever be issued. Once this commit was backported via linux-stable, both the v6.1 and v6.4 preempt-rt kernels started printing out 10 instances of this at boot: NOHZ tick-stop error: local softirq work is pending, handler #80!!! Remove the negation and return when local_bh_blocked() evaluates to true to bring the correct behaviour back. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Ahmad Fatoum <[email protected]> Reviewed-by: Wen Yang <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Christian Brauner <[email protected]> Date: Tue Aug 1 18:17:04 2023 +0200 tmpfs: verify {g,u}id mount options correctly [ Upstream commit 0200679fc7953177941e41c2a4241d0b6c2c5de8 ] A while ago we received the following report: "The other outstanding issue I noticed comes from the fact that fsconfig syscalls may occur in a different userns than that which called fsopen. That means that resolving the uid/gid via current_user_ns() can save a kuid that isn't mapped in the associated namespace when the filesystem is finally mounted. This means that it is possible for an unprivileged user to create files owned by any group in a tmpfs mount (since we can set the SUID bit on the tmpfs directory), or a tmpfs that is owned by any user, including the root group/user." The contract for {g,u}id mount options and {g,u}id values in general set from userspace has always been that they are translated according to the caller's idmapping. In so far, tmpfs has been doing the correct thing. But since tmpfs is mountable in unprivileged contexts it is also necessary to verify that the resulting {k,g}uid is representable in the namespace of the superblock to avoid such bugs as above. The new mount api's cross-namespace delegation abilities are already widely used. After having talked to a bunch of userspace this is the most faithful solution with minimal regression risks. I know of one users - systemd - that makes use of the new mount api in this way and they don't set unresolable {g,u}ids. So the regression risk is minimal. Link: https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com Fixes: f32356261d44 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Reviewed-by: "Seth Forshee (DigitalOcean)" <[email protected]> Reported-by: Seth Jenkins <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ian Rogers <[email protected]> Date: Thu Dec 1 20:57:41 2022 -0800 tools lib subcmd: Add dependency test to install_headers commit 5d890591db6bed8ca69bd4bfe0cdaca372973033 upstream. Compute the headers to be installed from their source headers and make each have its own build target to install it. Using dependencies avoids headers being reinstalled and getting a new timestamp which then causes files that depend on the header to be rebuilt. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ian Rogers <[email protected]> Date: Wed Nov 9 10:49:02 2022 -0800 tools lib subcmd: Add install target commit 630ae80ea1dd253609cb50cff87f3248f901aca3 upstream. This allows libsubcmd to be installed as a dependency. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ian Rogers <[email protected]> Date: Wed Nov 16 16:43:55 2022 -0800 tools lib subcmd: Make install_headers clearer commit 77dce6890a2a715b186bdc149c843571a5bb47df upstream. Add libsubcmd to the name so that this install_headers build appears different to similar targets in different libraries. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Hao Luo <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: Stanislav Fomichev <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ian Rogers <[email protected]> Date: Mon Jan 23 22:43:24 2023 -0800 tools/resolve_btfids: Alter how HOSTCC is forced commit 13e07691a16ff31b209fbfce25c01ff296b05e45 upstream. HOSTCC is always wanted when building. Setting CC to HOSTCC happens after tools/scripts/Makefile.include is included, meaning flags are set assuming say CC is gcc, but then it can be later set to HOSTCC which may be clang. tools/scripts/Makefile.include is needed for host set up and common macros in objtool's Makefile. Rather than override CC to HOSTCC, just pass CC as HOSTCC to Makefile.build, the libsubcmd builds and the linkage step. This means the Makefiles don't see things like CC changing and tool flag determination, and similar, work properly. Also, clear the passed subdir as otherwise an outer build may break by inadvertently passing an inappropriate value. Signed-off-by: Ian Rogers <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jiri Olsa <[email protected]> Date: Thu Feb 2 12:28:39 2023 +0100 tools/resolve_btfids: Compile resolve_btfids as host program commit 56a2df7615fa050cc67b89245b2a482849077939 upstream. Making resolve_btfids to be compiled as host program so we can avoid cross compile issues as reported by Nathan. Also we no longer need HOST_OVERRIDES for BINARY target, just for 'prepare' targets. Fixes: 13e07691a16f ("tools/resolve_btfids: Alter how HOSTCC is forced") Reported-by: Nathan Chancellor <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Acked-by: Ian Rogers <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Viktor Malik <[email protected]> Date: Tue May 30 14:33:52 2023 +0200 tools/resolve_btfids: Fix setting HOSTCFLAGS commit edd75c802855271c8610f58a2fc9e54aefc49ce5 upstream. Building BPF selftests with custom HOSTCFLAGS yields an error: # make HOSTCFLAGS="-O2" [...] HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o main.c:73:10: fatal error: linux/rbtree.h: No such file or directory 73 | #include <linux/rbtree.h> | ^~~~~~~~~~~~~~~~ The reason is that tools/bpf/resolve_btfids/Makefile passes header include paths by extending HOSTCFLAGS which is overridden by setting HOSTCFLAGS in the make command (because of Makefile rules [1]). This patch fixes the above problem by passing the include paths via `HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include and can be combined with overridding HOSTCFLAGS. [1] https://www.gnu.org/software/make/manual/html_node/Overriding.html Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program") Signed-off-by: Viktor Malik <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ian Rogers <[email protected]> Date: Mon Jan 23 22:43:23 2023 -0800 tools/resolve_btfids: Install subcmd headers commit af03299d8536d62b49c7f3cb929349eb2d66bcd5 upstream. Previously tools/lib/subcmd was added to the include path, switch to installing the headers and then including from that directory. This avoids dependencies on headers internal to tools/lib/subcmd. Add the missing subcmd directory to the affected #include. Signed-off-by: Ian Rogers <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jiri Olsa <[email protected]> Date: Thu Feb 9 15:37:35 2023 +0100 tools/resolve_btfids: Pass HOSTCFLAGS as EXTRA_CFLAGS to prepare targets commit 2531ba0e4ae67d6d0219400af27805fe52cd28e8 upstream. Thorsten reported build issue with command line that defined extra HOSTCFLAGS that were not passed into 'prepare' targets, but were used to build resolve_btfids objects. This results in build fail when these objects are linked together: /usr/bin/ld: /build.../tools/bpf/resolve_btfids//libbpf/libbpf.a(libbpf-in.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE \ object; recompile with -fPIE Fixing this by passing HOSTCFLAGS in EXTRA_CFLAGS as part of HOST_OVERRIDES variable for prepare targets. [1] https://lore.kernel.org/bpf/[email protected]/ Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program") Reported-by: Thorsten Leemhuis <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Thorsten Leemhuis <[email protected]> Acked-by: Ian Rogers <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ian Rogers <[email protected]> Date: Thu Feb 2 14:42:53 2023 -0800 tools/resolve_btfids: Tidy HOST_OVERRIDES commit e0975ab92f2406fd3e12834f62dc57cb10404f85 upstream. Don't set EXTRA_CFLAGS to HOSTCFLAGS, ensure CROSS_COMPILE isn't passed through. Signed-off-by: Ian Rogers <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Shen Jiamin <[email protected]> Date: Thu Dec 15 12:47:03 2022 +0800 tools/resolve_btfids: Use pkg-config to locate libelf commit 0e43662e61f2569500ab83b8188c065603530785 upstream. When libelf was not installed in the standard location, it cannot be located by the current building config. Use pkg-config to help locate libelf in such cases. Signed-off-by: Shen Jiamin <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Cc: Nathan Chancellor <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jarkko Sakkinen <[email protected]> Date: Mon Sep 4 21:12:10 2023 +0300 tpm: Enable hwrng only for Pluton on AMD CPUs commit 8f7f35e5aa6f2182eabcfa3abef4d898a48e9aa8 upstream. The vendor check introduced by commit 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs") doesn't work properly on a number of Intel fTPMs. On the reported systems the TPM doesn't reply at bootup and returns back the command code. This makes the TPM fail probe on Lenovo Legion Y540 laptop. Since only Microsoft Pluton is the only known combination of AMD CPU and fTPM from other vendor, disable hwrng otherwise. In order to make sysadmin aware of this, print also info message to the klog. Cc: [email protected] Fixes: 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs") Reported-by: Todd Brandt <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217804 Reported-by: Patrick Steinhardt <[email protected]> Reported-by: Raymond Jay Golo <[email protected]> Reported-by: Ronan Pigott <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Cc: Thorsten Leemhuis <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zheng Yejian <[email protected]> Date: Thu Aug 31 21:27:39 2023 +0800 tracing: Fix race issue between cpu buffer write and swap [ Upstream commit 3163f635b20e9e1fb4659e74f47918c9dddfe64e ] Warning happened in rb_end_commit() at code: if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))) WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142 rb_commit+0x402/0x4a0 Call Trace: ring_buffer_unlock_commit+0x42/0x250 trace_buffer_unlock_commit_regs+0x3b/0x250 trace_event_buffer_commit+0xe5/0x440 trace_event_buffer_reserve+0x11c/0x150 trace_event_raw_event_sched_switch+0x23c/0x2c0 __traceiter_sched_switch+0x59/0x80 __schedule+0x72b/0x1580 schedule+0x92/0x120 worker_thread+0xa0/0x6f0 It is because the race between writing event into cpu buffer and swapping cpu buffer through file per_cpu/cpu0/snapshot: Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1 -------- -------- tracing_snapshot_write() [...] ring_buffer_lock_reserve() cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a'; [...] rb_reserve_next_event() [...] ring_buffer_swap_cpu() if (local_read(&cpu_buffer_a->committing)) goto out_dec; if (local_read(&cpu_buffer_b->committing)) goto out_dec; buffer_a->buffers[cpu] = cpu_buffer_b; buffer_b->buffers[cpu] = cpu_buffer_a; // 2. cpu_buffer has swapped here. rb_start_commit(cpu_buffer); if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer' [...] // has not changed here. return NULL; } cpu_buffer_b->buffer = buffer_a; cpu_buffer_a->buffer = buffer_b; [...] // 4. Reserve event from 'cpu_buffer_a'. ring_buffer_unlock_commit() [...] cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!! rb_commit(cpu_buffer) rb_end_commit() // 6. WARN for the wrong 'committing' state !!! Based on above analysis, we can easily reproduce by following testcase: ``` bash #!/bin/bash dmesg -n 7 sysctl -w kernel.panic_on_warn=1 TR=/sys/kernel/tracing echo 7 > ${TR}/buffer_size_kb echo "sched:sched_switch" > ${TR}/set_event while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & ``` To fix it, IIUC, we can use smp_call_function_single() to do the swap on the target cpu where the buffer is located, so that above race would be avoided. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: <[email protected]> Fixes: f1affcaaa861 ("tracing: Add snapshot in the per_cpu trace directories") Signed-off-by: Zheng Yejian <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zheng Yejian <[email protected]> Date: Fri Aug 18 10:26:45 2023 +0800 tracing: Introduce pipe_cpumask to avoid race on trace_pipes [ Upstream commit c2489bb7e6be2e8cdced12c16c42fa128403ac03 ] There is race issue when concurrently splice_read main trace_pipe and per_cpu trace_pipes which will result in data read out being different from what actually writen. As suggested by Steven: > I believe we should add a ref count to trace_pipe and the per_cpu > trace_pipes, where if they are opened, nothing else can read it. > > Opening trace_pipe locks all per_cpu ref counts, if any of them are > open, then the trace_pipe open will fail (and releases any ref counts > it had taken). > > Opening a per_cpu trace_pipe will up the ref count for just that > CPU buffer. This will allow multiple tasks to read different per_cpu > trace_pipe files, but will prevent the main trace_pipe file from > being opened. But because we only need to know whether per_cpu trace_pipe is open or not, using a cpumask instead of using ref count may be easier. After this patch, users will find that: - Main trace_pipe can be opened by only one user, and if it is opened, all per_cpu trace_pipes cannot be opened; - Per_cpu trace_pipes can be opened by multiple users, but each per_cpu trace_pipe can only be opened by one user. And if one of them is opened, main trace_pipe cannot be opened. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Suggested-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Zheng Yejian <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Mikhail Kobuk <[email protected]> Date: Fri Aug 25 13:34:30 2023 +0300 tracing: Remove extra space at the end of hwlat_detector/mode [ Upstream commit 2cf0dee989a8b2501929eaab29473b6b1fa11057 ] Space is printed after each mode value including the last one: $ echo \"$(sudo cat /sys/kernel/tracing/hwlat_detector/mode)\" "none [round-robin] per-cpu " Found by Linux Verification Center (linuxtesting.org) with SVACE. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Fixes: 8fa826b7344d ("trace/hwlat: Implement the mode config option") Signed-off-by: Mikhail Kobuk <[email protected]> Reviewed-by: Alexey Khoroshilov <[email protected]> Acked-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Brian Foster <[email protected]> Date: Thu Aug 31 08:55:00 2023 -0400 tracing: Zero the pipe cpumask on alloc to avoid spurious -EBUSY commit 3d07fa1dd19035eb0b13ae6697efd5caa9033e74 upstream. The pipe cpumask used to serialize opens between the main and percpu trace pipes is not zeroed or initialized. This can result in spurious -EBUSY returns if underlying memory is not fully zeroed. This has been observed by immediate failure to read the main trace_pipe file on an otherwise newly booted and idle system: # cat /sys/kernel/debug/tracing/trace_pipe cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy Zero the allocation of pipe_cpumask to avoid the problem. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Fixes: c2489bb7e6be ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes") Reviewed-by: Zheng Yejian <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Brian Foster <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Geert Uytterhoeven <[email protected]> Date: Thu Mar 30 15:26:13 2023 +0200 treewide: Fix probing of devices in DT overlays commit 1a50d9403fb90cbe4dea0ec9fd0351d2ecbd8924 upstream. When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a032827daa89350 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for I2C Acked-by: Shawn Guo <[email protected]> Acked-by: Saravana Kannan <[email protected]> Tested-by: Ivan Bornyakov <[email protected]> Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vladislav Efanov <[email protected]> Date: Thu Feb 2 17:04:56 2023 +0300 udf: Check consistency of Space Bitmap Descriptor commit 1e0d4adf17e7ef03281d7b16555e7c1508c8ed2d upstream. Bits, which are related to Bitmap Descriptor logical blocks, are not reset when buffer headers are allocated for them. As the result, these logical blocks can be treated as free and be used for other blocks.This can cause usage of one buffer header for several types of data. UDF issues WARNING in this situation: WARNING: CPU: 0 PID: 2703 at fs/udf/inode.c:2014 __udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014 RIP: 0010:__udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014 Call Trace: udf_setup_indirect_aext+0x573/0x880 fs/udf/inode.c:1980 udf_add_aext+0x208/0x2e0 fs/udf/inode.c:2067 udf_insert_aext fs/udf/inode.c:2233 [inline] udf_update_extents fs/udf/inode.c:1181 [inline] inode_getblk+0x1981/0x3b70 fs/udf/inode.c:885 Found by Linux Verification Center (linuxtesting.org) with syzkaller. [JK: Somewhat cleaned up the boundary checks] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Vladislav Efanov <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jan Kara <[email protected]> Date: Mon Dec 19 20:10:35 2022 +0100 udf: Handle error when adding extent to a file commit 19fd80de0a8b5170ef34704c8984cca920dffa59 upstream. When adding extent to a file fails, so far we've silently squelshed the error. Make sure to propagate it up properly. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tom Rix <[email protected]> Date: Fri Dec 30 12:53:41 2022 -0500 udf: initialize newblock to 0 commit 23970a1c9475b305770fd37bebfec7a10f263787 upstream. The clang build reports this error fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (*err < 0) ^~~~~~~~ newblock is never set before error handling jump. Initialize newblock to 0 and remove redundant settings. Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file") Reported-by: Nathan Chancellor <[email protected]> Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Jan Kara <[email protected]> Message-Id: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Lorenz Bauer <[email protected]> Date: Thu Jul 20 17:30:05 2023 +0200 udp: re-score reuseport groups when connected sockets are present [ Upstream commit f0ea27e7bfe1c34e1f451a63eb68faa1d4c3a86d ] Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED sockets. To support these properly we remember whether a group has a connected socket and skip the fast reuseport early-return. In effect we continue scoring all reuseport sockets and then choose the one with the highest score. The current code fails to re-calculate the score for the result of lookup_reuseport. According to Kuniyuki Iwashima: 1) SO_INCOMING_CPU is set -> selected sk might have +1 score 2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk -> selected sk will have more than 8 Using the old score could trigger more lookups depending on the order that sockets are created. sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED) | | `-> select the next SO_INCOMING_CPU sk | `-> select itself (We should save this lookup) Fixes: efc6b6f6c311 ("udp: Improve load balancing for SO_REUSEPORT.") Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Randy Dunlap <[email protected]> Date: Tue Aug 1 22:15:00 2023 -0700 um: Fix hostaudio build errors [ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ] Use "select" to ensure that the required kconfig symbols are set as expected. Drop HOSTAUDIO since it is now equivalent to UML_SOUND. Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the status quo of the default configs. Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a kconfig warning for unmet dependencies. (This was not an issue when SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig builds and didn't find any issues.) This fixes build errors when CONFIG_SOUND is not set: ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module': hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer' ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp' ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module': hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp' ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer' ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp' and this kconfig warning: WARNING: unmet direct dependencies detected for SOUND Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: d886e87cb82b ("sound: make OSS sound core optional") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Closes: lore.kernel.org/r/[email protected] Cc: Richard Weinberger <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: Johannes Berg <[email protected]> Cc: [email protected] Cc: Tejun Heo <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Nicolas Schier <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Masahiro Yamada <[email protected]> Signed-off-by: Richard Weinberger <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 4 15:12:21 2023 -0400 USB: core: Change usb_get_device_descriptor() API commit de28e469da75359a2bb8cd8778b78aa64b1be1f4 upstream. The usb_get_device_descriptor() routine reads the device descriptor from the udev device and stores it directly in udev->descriptor. This interface is error prone, because the USB subsystem expects in-memory copies of a device's descriptors to be immutable once the device has been initialized. The interface is changed so that the device descriptor is left in a kmalloc-ed buffer, not copied into the usb_device structure. A pointer to the buffer is returned to the caller, who is then responsible for kfree-ing it. The corresponding changes needed in the various callers are fairly small. Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 11 13:38:46 2023 -0400 USB: core: Fix oversight in SuperSpeed initialization commit 59cf445754566984fd55af19ba7146c76e6627bc upstream. Commit 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") altered the way USB devices are enumerated following detection, and in the process it messed up the initialization of SuperSpeed (or faster) devices: [ 31.650759] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd [ 31.663107] usb 2-1: device descriptor read/8, error -71 [ 31.952697] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 31.965122] usb 2-1: device descriptor read/8, error -71 [ 32.080991] usb usb2-port1: attempt power cycle ... The problem was caused by the commit forgetting that in SuperSpeed or faster devices, the device descriptor uses a logarithmic encoding of the bMaxPacketSize0 value. (For some reason I thought the 255 case in the switch statement was meant for these devices, but it isn't -- it was meant for Wireless USB and is no longer needed.) We can fix the oversight by testing for buf->bMaxPacketSize0 = 9 (meaning 512, the actual maxpacket size for ep0 on all SuperSpeed devices) and straightening out the logic that checks and adjusts our initial guesses of the maxpacket value. Reported-and-tested-by: Thinh Nguyen <[email protected]> Closes: https://lore.kernel.org/linux-usb/[email protected]/ Signed-off-by: Alan Stern <[email protected]> Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 4 15:14:14 2023 -0400 USB: core: Fix race by not overwriting udev->descriptor in hub_port_init() commit ff33299ec8bb80cdcc073ad9c506bd79bb2ed20b upstream. Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors(): BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011 CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351 print_report mm/kasan/report.c:462 [inline] kasan_report+0x11c/0x130 mm/kasan/report.c:572 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883 ... Allocated by task 758: ... __do_kmalloc_node mm/slab_common.c:966 [inline] __kmalloc+0x5e/0x190 mm/slab_common.c:979 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:680 [inline] usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline] usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545 As analyzed by Khazhy Kumykov, the cause of this bug is a race between read_descriptors() and hub_port_init(): The first routine uses a field in udev->descriptor, not expecting it to change, while the second overwrites it. Prior to commit 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") this race couldn't occur, because the routines were mutually exclusive thanks to the device locking. Removing that locking from read_descriptors() exposed it to the race. The best way to fix the bug is to keep hub_port_init() from changing udev->descriptor once udev has been initialized and registered. Drivers expect the descriptors stored in the kernel to be immutable; we should not undermine this expectation. In fact, this change should have been made long ago. So now hub_port_init() will take an additional argument, specifying a buffer in which to store the device descriptor it reads. (If udev has not yet been initialized, the buffer pointer will be NULL and then hub_port_init() will store the device descriptor in udev as before.) This eliminates the data race responsible for the out-of-bounds read. The changes to hub_port_init() appear more extensive than they really are, because of indentation changes resulting from an attempt to avoid writing to other parts of the usb_device structure after it has been initialized. Similar changes should be made to the code that reads the BOS descriptor, but that can be handled in a separate patch later on. This patch is sufficient to fix the bug found by syzbot. Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/#r Signed-off-by: Alan Stern <[email protected]> Cc: Khazhy Kumykov <[email protected]> Fixes: 45bf39f8df7f ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 4 15:10:59 2023 -0400 USB: core: Unite old scheme and new scheme descriptor reads commit 85d07c55621676d47d873d2749b88f783cd4d5a1 upstream. In preparation for reworking the usb_get_device_descriptor() routine, it is desirable to unite the two different code paths responsible for initially determining endpoint 0's maximum packet size in a newly discovered USB device. Making this determination presents a chicken-and-egg sort of problem, in that the only way to learn the maxpacket value is to get it from the device descriptor retrieved from the device, but communicating with the device to retrieve a descriptor requires us to know beforehand the ep0 maxpacket size. In practice this problem is solved in two different ways, referred to in hub.c as the "old scheme" and the "new scheme". The old scheme (which is the approach recommended by the USB-2 spec) involves asking the device to send just the first eight bytes of its device descriptor. Such a transfer uses packets containing no more than eight bytes each, and every USB device must have an ep0 maxpacket size >= 8, so this should succeed. Since the bMaxPacketSize0 field of the device descriptor lies within the first eight bytes, this is all we need. The new scheme is an imitation of the technique used in an early Windows USB implementation, giving it the happy advantage of working with a wide variety of devices (some of them at the time would not work with the old scheme, although that's probably less true now). It involves making an initial guess of the ep0 maxpacket size, asking the device to send up to 64 bytes worth of its device descriptor (which is only 18 bytes long), and then resetting the device to clear any error condition that might have resulted from the guess being wrong. The initial guess is determined by the connection speed; it should be correct in all cases other than full speed, for which the allowed values are 8, 16, 32, and 64 (in this case the initial guess is 64). The reason for this patch is that the old- and new-scheme parts of hub_port_init() use different code paths, one involving usb_get_device_descriptor() and one not, for their initial reads of the device descriptor. Since these reads have essentially the same purpose and are made under essentially the same circumstances, this is illogical. It makes more sense to have both of them use a common subroutine. This subroutine does basically what the new scheme's code did, because that approach is more general than the one used by the old scheme. It only needs to know how many bytes to transfer and whether or not it is being called for the first iteration of a retry loop (in case of certain time-out errors). There are two main differences from the former code: We initialize the bDescriptorType field of the transfer buffer to 0 before performing the transfer, to avoid possibly accessing an uninitialized value afterward. We read the device descriptor into a temporary buffer rather than storing it directly into udev->descriptor, which the old scheme implementation used to do. Since the whole point of this first read of the device descriptor is to determine the bMaxPacketSize0 value, that is what the new routine returns (or an error code). The value is stored in a local variable rather than in udev->descriptor. As a side effect, this necessitates moving a section of code that checks the bcdUSB field for SuperSpeed devices until after the full device descriptor has been retrieved. Signed-off-by: Alan Stern <[email protected]> Cc: Oliver Neukum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 11 13:44:38 2023 -0400 USB: gadget: core: Add missing kerneldoc for vbus_work [ Upstream commit 159a98afc88e88f588077afe818081d67f50a5e0 ] Add a missing kerneldoc description of the vbus_work field in struct usb_udc. Signed-off-by: Alan Stern <[email protected]> Fixes: 50966da807c8 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alan Stern <[email protected]> Date: Fri Aug 11 13:47:04 2023 -0400 USB: gadget: f_mass_storage: Fix unused variable warning [ Upstream commit 55c3e571d2a0aabef4f1354604443f1c415d2e85 ] Fix a "variable set but not used" warning in f_mass_storage.c. rc is used if verbose debugging is enabled but not otherwise. Signed-off-by: Alan Stern <[email protected]> Fixes: d5e2b67aae79 ("USB: g_mass_storage: template f_mass_storage.c file created") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xu Yang <[email protected]> Date: Tue Jun 27 19:03:52 2023 +0800 usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host() [ Upstream commit 5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 ] The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is 0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real state if the ID pin is float, such as Host-only or Type-C cases. The value of OTG_ID_VALUE is always 1 which means device mode. This patch will fix the issue by judging the current mode based on last_event. The controller will update last_event in time. Fixes: 7b09e67639d6 ("usb: phy: mxs: refine mxs_phy_disconnect_line") Signed-off-by: Xu Yang <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: RD Babiera <[email protected]> Date: Mon Aug 14 18:05:59 2023 +0000 usb: typec: bus: verify partner exists in typec_altmode_attention commit f23643306430f86e2f413ee2b986e0773e79da31 upstream. Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: [email protected] Signed-off-by: RD Babiera <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: RD Babiera <[email protected]> Date: Mon Jul 31 16:59:23 2023 +0000 usb: typec: tcpm: set initial svdm version based on pd revision commit c97cd0b4b54eb42aed7f6c3c295a2d137f6d2416 upstream. When sending Discover Identity messages to a Port Partner that uses Power Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0, expecting the port partner to respond with its highest supported SVDM version as stated in Section 6.4.4.2.3 in the Power Delivery v3 specification. However, sending SVDM v2 to some Power Delivery v2 port partners results in a NAK whereas sending SVDM v1 does not. NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1), and one solution could be to resend Discover Identity on a lower SVDM version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK response Should be taken as an indication not to retry that particular Command." Instead, we can set the SVDM version to the maximum one supported by the negotiated PD revision. When operating in PD v2, this obeys Section 6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate Version 2.0." Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: [email protected] Signed-off-by: RD Babiera <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Stefan Hajnoczi <[email protected]> Date: Tue Aug 1 11:53:52 2023 -0400 vfio/type1: fix cap_migration information leak [ Upstream commit cd24e2a60af633f157d7e59c0a6dba64f131c0b1 ] Fix an information leak where an uninitialized hole in struct vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace. The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as shown in this pahole(1) output: struct vfio_iommu_type1_info_cap_migration { struct vfio_info_cap_header header; /* 0 8 */ __u32 flags; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ __u64 pgsize_bitmap; /* 16 8 */ __u64 max_dirty_bitmap_size; /* 24 8 */ /* size: 32, cachelines: 1, members: 4 */ /* sum members: 28, holes: 1, sum holes: 4 */ /* last cacheline: 32 bytes */ }; The cap_mig variable is filled in without initializing the hole: static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu, struct vfio_info_cap *caps) { struct vfio_iommu_type1_info_cap_migration cap_mig; cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION; cap_mig.header.version = 1; cap_mig.flags = 0; /* support minimum pgsize */ cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap); cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX; return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig)); } The structure is then copied to a temporary location on the heap. At this point it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace later: int vfio_info_add_capability(struct vfio_info_cap *caps, struct vfio_info_cap_header *cap, size_t size) { struct vfio_info_cap_header *header; header = vfio_info_cap_add(caps, size, cap->id, cap->version); if (IS_ERR(header)) return PTR_ERR(header); memcpy(header + 1, cap + 1, size - sizeof(*header)); return 0; } This issue was found by code inspection. Signed-off-by: Stefan Hajnoczi <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Fixes: ad721705d09c ("vfio iommu: Add migration capability to report supported features") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: David Howells <[email protected]> Date: Tue Aug 8 07:34:20 2023 -0400 vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing [ Upstream commit d80a8f1b58c2bc8d7c6bfb65401ea4f7ec8cddc2 ] When NFS superblocks are created by automounting, their LSM parameters aren't set in the fs_context struct prior to sget_fc() being called, leading to failure to match existing superblocks. This bug leads to messages like the following appearing in dmesg when fscache is enabled: NFS: Cache volume key already in use (nfs,4.2,2,108,106a8c0,1,,,,100000,100000,2ee,3a98,1d4c,3a98,1) Fix this by adding a new LSM hook to load fc->security for submount creation. Signed-off-by: David Howells <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Link: https://lore.kernel.org/r/165962680944.3334508.6610023900349142034.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165962729225.3357250.14350728846471527137.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/165970659095.2812394.6868894171102318796.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/166133579016.3678898.6283195019480567275.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/[email protected]/ # v5 Fixes: 9bc61ab18b1d ("vfs: Introduce fs_context, switch vfs_kern_mount() to it.") Fixes: 779df6a5480f ("NFS: Ensure security label is set for root inode") Tested-by: Jeff Layton <[email protected]> Acked-by: Casey Schaufler <[email protected]> Acked-by: "Christian Brauner (Microsoft)" <[email protected]> Acked-by: Paul Moore <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yuan Yao <[email protected]> Date: Tue Aug 8 05:10:59 2023 +0000 virtio_ring: fix avail_wrap_counter in virtqueue_add_packed [ Upstream commit 1acfe2c1225899eab5ab724c91b7e1eb2881b9ab ] In current packed virtqueue implementation, the avail_wrap_counter won't flip, in the case when the driver supplies a descriptor chain with a length equals to the queue size; total_sg == vq->packed.vring.num. Let’s assume the following situation: vq->packed.vring.num=4 vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 0 Then the driver adds a descriptor chain containing 4 descriptors. We expect the following result with avail_wrap_counter flipped: vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 1 But, the current implementation gives the following result: vq->packed.next_avail_idx: 1 vq->packed.avail_wrap_counter: 0 To reproduce the bug, you can set a packed queue size as small as possible, so that the driver is more likely to provide a descriptor chain with a length equal to the packed queue size. For example, in qemu run following commands: sudo qemu-system-x86_64 \ -enable-kvm \ -nographic \ -kernel "path/to/kernel_image" \ -m 1G \ -drive file="path/to/rootfs",if=none,id=disk \ -device virtio-blk,drive=disk \ -drive file="path/to/disk_image",if=none,id=rwdisk \ -device virtio-blk,drive=rwdisk,packed=on,queue-size=4,\ indirect_desc=off \ -append "console=ttyS0 root=/dev/vda rw init=/bin/bash" Inside the VM, create a directory and mount the rwdisk device on it. The rwdisk will hang and mount operation will not complete. This commit fixes the wrap counter error by flipping the packed.avail_wrap_counter, when start of descriptor chain equals to the end of descriptor chain (head == i). Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") Signed-off-by: Yuan Yao <[email protected]> Message-Id: <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ani Sinha <[email protected]> Date: Wed Jul 5 19:14:07 2023 +0530 vmbus_testing: fix wrong python syntax for integer value comparison [ Upstream commit ed0cf84e9cc42e6310961c87709621f1825c2bb8 ] It is incorrect in python to compare integer values using the "is" keyword. The "is" keyword in python is used to compare references to two objects, not their values. Newer version of python3 (version 3.8) throws a warning when such incorrect comparison is made. For value comparison, "==" should be used. Fix this in the code and suppress the following warning: /usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="? Signed-off-by: Ani Sinha <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:05:02 2023 +0300 wifi: ath10k: Use RMW accessors for changing LNKCTL [ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which does proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <[email protected]> Fixes: 76d870ed09ab ("ath10k: enable ASPM") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilpo Järvinen <[email protected]> Date: Mon Jul 17 15:05:00 2023 +0300 wifi: ath11k: Use RMW accessors for changing LNKCTL [ Upstream commit 6c1b6bdb34aaf8f94f65a9cae1d63490320c11bc ] Don't assume that only the driver would be accessing LNKCTL. ASPM policy changes can trigger write to LNKCTL outside of driver's control. Use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register value. On restore, clear the ASPMC field properly. Suggested-by: Lukas Wunner <[email protected]> Fixes: e9603f4bdcc0 ("ath11k: pci: disable ASPM L0sLs before downloading firmware") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Fedor Pchelkin <[email protected]> Date: Tue Apr 25 22:26:06 2023 +0300 wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx [ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ] Currently, the synchronization between ath9k_wmi_cmd() and ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd(). Consider the following scenario: CPU0 CPU1 ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) ath9k_wmi_cmd_issue(...) wait_for_completion_timeout(...) --- timeout --- /* the callback is being processed * before last_seq_id became zero */ ath9k_wmi_ctrl_rx(...) spin_lock_irqsave(...) /* wmi->last_seq_id check here * doesn't detect timeout yet */ spin_unlock_irqrestore(...) /* last_seq_id is zeroed to * indicate there was a timeout */ wmi->last_seq_id = 0 mutex_unlock(&wmi->op_mutex) return -ETIMEDOUT ath9k_wmi_cmd(...) mutex_lock(&wmi->op_mutex) /* the buffer is replaced with * another one */ wmi->cmd_rsp_buf = rsp_buf wmi->cmd_rsp_len = rsp_len ath9k_wmi_cmd_issue(...) spin_lock_irqsave(...) spin_unlock_irqrestore(...) wait_for_completion_timeout(...) /* the continuation of the * callback left after the first * ath9k_wmi_cmd call */ ath9k_wmi_rsp_callback(...) /* copying data designated * to already timeouted * WMI command into an * inappropriate wmi_cmd_buf */ memcpy(...) complete(&wmi->cmd_wait) /* awakened by the bogus callback * => invalid return result */ mutex_unlock(&wmi->op_mutex) return 0 To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd() under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for initially designated wmi_cmd call, otherwise the path would be rejected with last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Fedor Pchelkin <[email protected]> Date: Tue Apr 25 22:26:07 2023 +0300 wifi: ath9k: protect WMI command response buffer replacement with a lock [ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ] If ath9k_wmi_cmd() has exited with a timeout, it is possible that during next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command writes to new wmi->cmd_rsp_buf and makes a completion. This results in an invalid ath9k_wmi_cmd() return value. Move the replacement of WMI command response buffer and length under wmi_lock. Note that last_seq_id value is updated there, too. Thus, the buffer cannot be written to by a belated wmi_rsp callback because that path is properly rejected by the last_seq_id check. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Wang Ming <[email protected]> Date: Thu Jul 13 11:03:44 2023 +0800 wifi: ath9k: use IS_ERR() with debugfs_create_dir() [ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ] The debugfs_create_dir() function returns error pointers, it never returns NULL. Most incorrect error checks were fixed, but the one in ath9k_htc_init_debug() was forgotten. Fix the remaining error check. Fixes: e5facc75fa91 ("ath9k_htc: Cleanup HTC debugfs") Signed-off-by: Wang Ming <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sat Jul 29 16:05:00 2023 +0200 wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() [ Upstream commit 16e455a465fca91907af0108f3d013150386df30 ] Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers a backtrace caused by the following field-spanning warning: memcpy: detected field-spanning write (size 120) of single field "¶ms_le->channel_list[0]" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2) The driver still works after this warning. The warning was introduced by the new field-spanning write checks which were enabled recently. Fix this by replacing the channel_list[1] declaration at the end of the struct with a flexible array declaration. Most users of struct brcmf_scan_params_le calculate the size to alloc using the size of the non flex-array part of the struct + needed extra space, so they do not care about sizeof(struct brcmf_scan_params_le). brcmf_notify_escan_complete() however uses the struct on the stack, expecting there to be room for at least 1 entry in the channel-list to store the special -1 abort channel-id. To make this work use an anonymous union with a padding member added + the actual channel_list flexible array. Cc: Kees Cook <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Franky Lin <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Johannes Berg <[email protected]> Date: Thu Jun 8 16:36:04 2023 +0300 wifi: cfg80211: remove links only on AP [ Upstream commit 34d4e3eb67fed9c19719bedb748e5a8b6ccc97a5 ] Since links are only controlled by userspace via cfg80211 in AP mode, also only remove them from the driver in that case. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30715fe642bc5fc4340c8f@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilan Peer <[email protected]> Date: Thu Jun 8 16:36:07 2023 +0300 wifi: mac80211: Use active_links instead of valid_links in Tx [ Upstream commit 7b3b9ac899b54f53f7c9fc07e1c562f56b2187fa ] Fix few places on the Tx path where the valid_links were used instead of active links. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230608163202.e24832691fc8.I9ac10dc246d7798a8d26b1a94933df5668df63fc@changeid Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryder Lee <[email protected]> Date: Thu Jul 27 02:35:06 2023 +0800 wifi: mt76: mt7915: fix power-limits while chan_switch [ Upstream commit 6c0570bc21ec2073890aa252c8420ca7bec402e4 ] If user changes the channel without completely disabling the interface the txpower_sku values reported track the old channel the device was operating on. If user bounces the interface the correct power tables are applied. mt7915_sku_group_len array gets updated before the channel switch happens so it uses data from the old channel. Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting") Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support") Reported-By: Chad Monroe <[email protected]> Tested-by: Chad Monroe <[email protected]> Signed-off-by: Allen Ye <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ming Yen Hsieh <[email protected]> Date: Thu May 18 22:08:14 2023 +0800 wifi: mt76: mt7921: fix non-PSC channel scan fail [ Upstream commit 0e5911bb7cc92c00dda9b4d635c1266b7ca915c6 ] Due to the scan command may only request legacy bands and PSC channel in 6GHz band, we are unable to scan the APs on non-PSC channel in this case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel (obtained during scan on legacy bands) in 6GHz scan request. Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support") Signed-off-by: Ming Yen Hsieh <[email protected]> Signed-off-by: Deren Wu <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Sun Jul 23 16:03:50 2023 +0800 wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH [ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ] It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]); in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read. Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma <[email protected]> Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Mon Aug 14 12:49:57 2023 +0300 wifi: mwifiex: avoid possible NULL skb pointer dereference [ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ] In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling") Acked-by: Brian Norris <[email protected]> Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Mon Jul 31 10:43:07 2023 +0300 wifi: mwifiex: fix error recovery in PCIE buffer descriptor management [ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ] Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do 'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should be released with 'dma_free_coherent()'. The latter is performed in 'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)' 'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'. Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset") Signed-off-by: Dmitry Antipov <[email protected]> Acked-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Dmitry Antipov <[email protected]> Date: Wed Aug 2 19:07:15 2023 +0300 wifi: mwifiex: fix memory leak in mwifiex_histogram_read() [ Upstream commit 9c8fd72a5c2a031cbc680a2990107ecd958ffcdb ] Always free the zeroed page on return from 'mwifiex_histogram_read()'. Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support") Acked-by: Brian Norris <[email protected]> Signed-off-by: Dmitry Antipov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Polaris Pi <[email protected]> Date: Thu Aug 10 08:39:11 2023 +0000 wifi: mwifiex: Fix missed return in oob checks failed path [ Upstream commit 2785851c627f2db05f9271f7f63661b5dbd95c4c ] Add missed return in mwifiex_uap_queue_bridged_pkt() and mwifiex_process_rx_packet(). Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets") Signed-off-by: Polaris Pi <[email protected]> Reported-by: Dmitry Antipov <[email protected]> Acked-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Polaris Pi <[email protected]> Date: Sun Jul 23 07:07:41 2023 +0000 wifi: mwifiex: Fix OOB and integer underflow when rx packets [ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ] Make sure mwifiex_process_mgmt_packet, mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet, mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet not out-of-bounds access the skb->data buffer. Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211") Signed-off-by: Polaris Pi <[email protected]> Reviewed-by: Matthew Wang <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Lin Ma <[email protected]> Date: Wed Aug 9 11:31:51 2023 +0800 wifi: nl80211/cfg80211: add forgotten nla_policy for BSS color attribute [ Upstream commit 218d690c49b7e9c94ad0d317adbdd4af846ea0dc ] The previous commit dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") adds a parameter for NDP ranging by introducing a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR. However, the author forgot to also describe the nla_policy at nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just complement it to avoid malformed attribute that causes out-of-attribute access. Fixes: dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhang Shurong <[email protected]> Date: Sat Jul 15 21:42:57 2023 +0800 wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set() [ Upstream commit 59b4cc439f184c5eaa34161ec67af1e16ffabed4 ] If there is a failure during kstrtobool_from_user() rtw89_debug_priv_btc_manual_set should return a negative error code instead of returning the count directly. Fix this bug by returning an error code instead of a count after a failed call of the function "kstrtobool_from_user". Moreover I omitted the label "out" with this source code correction. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Zhang Shurong <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Thore Sommer <[email protected]> Date: Tue Aug 15 14:29:42 2023 +0300 X.509: if signature is unsupported skip validation commit ef5b52a631f8c18353e80ccab8408b963305510c upstream. When the hash algorithm for the signature is not available the digest size is 0 and the signature in the certificate is marked as unsupported. When validating a self-signed certificate, this needs to be checked, because otherwise trying to validate the signature will fail with an warning: Loading compiled-in X.509 certificates WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \ pkcs1pad_verify+0x46/0x12c ... Problem loading in-kernel X.509 certificate (-22) Signed-off-by: Thore Sommer <[email protected]> Cc: [email protected] # v4.7+ Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier") Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Randy Dunlap <[email protected]> Date: Thu Jul 27 18:11:20 2023 -0700 x86/APM: drop the duplicate APM_MINOR_DEV macro [ Upstream commit 4ba2909638a29630a346d6c4907a3105409bee7d ] This source file already includes <linux/miscdevice.h>, which contains the same macro. It doesn't need to be defined here again. Fixes: 874bcd00f520 ("apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.h") Signed-off-by: Randy Dunlap <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: [email protected] Cc: Sohil Mehta <[email protected]> Cc: Corentin Labbe <[email protected]> Reviewed-by: Sohil Mehta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ard Biesheuvel <[email protected]> Date: Mon Aug 7 18:26:58 2023 +0200 x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved [ Upstream commit 264b82fdb4989cf6a44a2bcd0c6ea05e8026b2ac ] The 4-to-5 level mode switch trampoline disables long mode and paging in order to be able to flick the LA57 bit. According to section 3.4.1.1 of the x86 architecture manual [0], 64-bit GPRs might not retain the upper 32 bits of their contents across such a mode switch. Given that RBP, RBX and RSI are live at this point, preserve them on the stack, along with the return address that might be above 4G as well. [0] Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture "Because the upper 32 bits of 64-bit general-purpose registers are undefined in 32-bit modes, the upper 32 bits of any general-purpose register are not preserved when switching from 64-bit mode to a 32-bit mode (to protected mode or compatibility mode). Software must not depend on these bits to maintain a value after a 64-bit to 32-bit mode switch." Fixes: 194a9749c73d650c ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G") Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Mikel Rychliski <[email protected]> Date: Wed Aug 23 17:51:58 2023 -0400 x86/efistub: Fix PCI ROM preservation in mixed mode [ Upstream commit 8b94da92559f7e403dc7ab81937cc50f949ee2fd ] preserve_pci_rom_image() was accessing the romsize field in efi_pci_io_protocol_t directly instead of using the efi_table_attr() helper. This prevents the ROM image from being saved correctly during a mixed mode boot. Fixes: 2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function") Signed-off-by: Mikel Rychliski <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Yazen Ghannam <[email protected]> Date: Mon Aug 14 15:08:53 2023 -0500 x86/MCE: Always save CS register on AMD Zen IF Poison errors commit 4240e2ebe67941ce2c4f5c866c3af4b5ac7a0c67 upstream. The Instruction Fetch (IF) units on current AMD Zen-based systems do not guarantee a synchronous #MC is delivered for poison consumption errors. Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the microarchitecture does guarantee that the exception is delivered within the same context. In other words, the exact rIP is not known, but the context is known to not have changed. There is no architecturally-defined method to determine this behavior. The Code Segment (CS) register is always valid on such IF unit poison errors regardless of the value of MCG_STATUS[EIPV|RIPV]. Add a quirk to save the CS register for poison consumption from the IF unit banks. This is needed to properly determine the context of the error. Otherwise, the severity grading function will assume the context is IN_KERNEL due to the m->cs value being 0 (the initialized value). This leads to unnecessary kernel panics on data poison errors due to the kernel believing the poison consumption occurred in kernel context. Signed-off-by: Yazen Ghannam <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Janusz Krzysztofik <[email protected]> Date: Mon Jul 10 09:36:14 2023 +0200 x86/mm: Fix PAT bit missing from page protection modify mask [ Upstream commit 548cb932051fb6232ac983ed6673dae7bdf3cf4c ] Visible glitches have been observed when running graphics applications on Linux under Xen hypervisor. Those observations have been confirmed with failures from kms_pwrite_crc Intel GPU test that verifies data coherency of DRM frame buffer objects using hardware CRC checksums calculated by display controllers, exposed to userspace via debugfs. Affected processing paths have then been identified with new IGT test variants that mmap the objects using different methods and caching modes [1]. When running as a Xen PV guest, Linux uses Xen provided PAT configuration which is different from its native one. In particular, Xen specific PTE encoding of write-combining caching, likely used by graphics applications, differs from the Linux default one found among statically defined minimal set of supported modes. Since Xen defines PTE encoding of the WC mode as _PAGE_PAT, it no longer belongs to the minimal set, depends on correct handling of _PAGE_PAT bit, and can be mismatched with write-back caching. When a user calls mmap() for a DRM buffer object, DRM device specific .mmap file operation, called from mmap_region(), takes care of setting PTE encoding bits in a vm_page_prot field of an associated virtual memory area structure. Unfortunately, _PAGE_PAT bit is not preserved when the vma's .vm_flags are then applied to .vm_page_prot via vm_set_page_prot(). Bits to be preserved are determined with _PAGE_CHG_MASK symbol that doesn't cover _PAGE_PAT. As a consequence, WB caching is requested instead of WC when running under Xen (also, WP is silently changed to WT, and UC downgraded to UC_MINUS). When running on bare metal, WC is not affected, but WP and WT extra modes are unintentionally replaced with WC and UC, respectively. WP and WT modes, encoded with _PAGE_PAT bit set, were introduced by commit 281d4078bec3 ("x86: Make page cache mode a real type"). Care was taken to extend _PAGE_CACHE_MASK symbol with that additional bit, but that symbol has never been used for identification of bits preserved when applying page protection flags. Support for all cache modes under Xen, including the problematic WC mode, was then introduced by commit 47591df50512 ("xen: Support Xen pv-domains using PAT"). The issue needs to be fixed by including _PAGE_PAT bit into a bitmask used by pgprot_modify() for selecting bits to be preserved. We can do that either internally to pgprot_modify() (as initially proposed), or by making _PAGE_PAT a part of _PAGE_CHG_MASK. If we go for the latter then, since _PAGE_PAT is the same as _PAGE_PSE, we need to note that _HPAGE_CHG_MASK -- a huge pmds' counterpart of _PAGE_CHG_MASK, introduced by commit c489f1257b8c ("thp: add pmd_modify"), defined as (_PAGE_CHG_MASK | _PAGE_PSE) -- will no longer differ from _PAGE_CHG_MASK. If such modification of _PAGE_CHG_MASK was irrelevant to its users then one might wonder why that new _HPAGE_CHG_MASK symbol was introduced instead of reusing the existing one with that otherwise irrelevant bit (_PAGE_PSE in that case) added. Add _PAGE_PAT to _PAGE_CHG_MASK and _PAGE_PAT_LARGE to _HPAGE_CHG_MASK for symmetry. Split out common bits from both symbols to a common symbol for clarity. [ dhansen: tweak the solution changelog description ] [1] https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/0f0754413f14 Fixes: 281d4078bec3 ("x86: Make page cache mode a real type") Signed-off-by: Janusz Krzysztofik <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Tested-by: Marek Marczykowski-Górecki <[email protected]> Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7648 Link: https://lore.kernel.org/all/20230710073613.8006-2-janusz.krzysztofik%40linux.intel.com Signed-off-by: Sasha Levin <[email protected]>
Author: Steve Rutherford <[email protected]> Date: Thu Aug 24 15:37:31 2023 -0700 x86/sev: Make enc_dec_hypercall() accept a size instead of npages commit ac3f9c9f1b37edaa7d1a9b908bc79d843955a1a2 upstream. enc_dec_hypercall() accepted a page count instead of a size, which forced its callers to round up. As a result, non-page aligned vaddrs caused pages to be spuriously marked as decrypted via the encryption status hypercall, which in turn caused consistent corruption of pages during live migration. Live migration requires accurate encryption status information to avoid migrating pages from the wrong perspective. Fixes: 064ce6c550a0 ("mm: x86: Invoke hypercall when page encryption status is changed") Signed-off-by: Steve Rutherford <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Tom Lendacky <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Tested-by: Ben Hillier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jack Wang <[email protected]> Date: Wed Sep 6 15:17:12 2023 +0200 x86/sgx: Break up long non-preemptible delays in sgx_vepc_release() commit 3d7d72a34e05b23e21bafc8bfb861e73c86b31f3 upstream. On large enclaves we hit the softlockup warning with following call trace: xa_erase() sgx_vepc_release() __fput() task_work_run() do_exit() The latency issue is similar to the one fixed in: 8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves") The test system has 64GB of enclave memory, and all is assigned to a single VM. Release of 'vepc' takes a longer time and causes long latencies, which triggers the softlockup warning. Add cond_resched() to give other tasks a chance to run and reduce latencies, which also avoids the softlockup detector. [ mingo: Rewrote the changelog. ] Fixes: 540745ddbc70 ("x86/sgx: Introduce virtual EPC for use by KVM guests") Reported-by: Yu Zhang <[email protected]> Signed-off-by: Jack Wang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Yu Zhang <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Reviewed-by: Kai Huang <[email protected]> Acked-by: Haitao Huang <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dave Hansen <[email protected]> Date: Tue Aug 29 08:07:25 2023 -0700 x86/speculation: Mark all Skylake CPUs as vulnerable to GDS [ Upstream commit c9f4c45c8ec3f07f4f083f9750032a1ec3eab6b2 ] The Gather Data Sampling (GDS) vulnerability is common to all Skylake processors. However, the "client" Skylakes* are now in this list: https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html which means they are no longer included for new vulnerabilities here: https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html or in other GDS documentation. Thus, they were not included in the original GDS mitigation patches. Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the other Skylake CPUs (which include Kaby Lake). Also group the CPUs so that the ones that share the exact same vulnerabilities are next to each other. Last, move SRBDS to the end of each line. This makes it clear at a glance that SKYLAKE_X is unique. Of the five Skylakes, it is the only "server" CPU and has a different implementation from the clients of the "special register" hardware, making it immune to SRBDS. This makes the diff much harder to read, but the resulting table is worth it. I very much appreciate the report from Michael Zhivich about this issue. Despite what level of support a hardware vendor is providing, the kernel very much needs an accurate and up-to-date list of vulnerable CPUs. More reports like this are very welcome. * Client Skylakes are CPUID 406E3/506E3 which is family 6, models 0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L. Reported-by: Michael Zhivich <[email protected]> Fixes: 8974eb588283 ("x86/speculation: Add Gather Data Sampling mitigation") Signed-off-by: Dave Hansen <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Daniel Sneddon <[email protected]> Cc: Linus Torvalds <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Matthew Wilcox (Oracle) <[email protected]> Date: Wed Jul 26 22:58:17 2023 -0400 XArray: Do not return sibling entries from xa_load() commit cbc02854331edc6dc22d8b77b6e22e38ebc7dd51 upstream. It is possible for xa_load() to observe a sibling entry pointing to another sibling entry. An example: Thread A: Thread B: xa_store_range(xa, entry, 188, 191, gfp); xa_load(xa, 191); entry = xa_entry(xa, node, 63); [entry is a sibling of 188] xa_store_range(xa, entry, 184, 191, gfp); if (xa_is_sibling(entry)) offset = xa_to_sibling(entry); entry = xa_entry(xas->xa, node, offset); [entry is now a sibling of 184] It is sufficient to go around this loop until we hit a non-sibling entry. Sibling entries always point earlier in the node, so we are guaranteed to terminate this search. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Max Filippov <[email protected]> Date: Mon Jul 24 00:58:24 2023 -0700 xtensa: PMU: fix base address for the newer hardware commit 687eb3c42f4ad81e7c947c50e2d865f692064291 upstream. With introduction of ERI access control in RG.0 base address of the PMU unit registers has changed. Add support for the new PMU configuration. Cc: [email protected] Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>