Партнёры:
Хостинг:
file - determine file type
The type printed will usually contain one of the words ``text '' (the file contains only printing characters and a few common control characters and is probably safe to read on an ASCII terminal), ``executable '' (the file contains the result of compiling a program in a form understandable to some UNIX kernel or another), or ``data '' meaning anything else (data is usually `binary' or non-printable). Exceptions are well-known file formats (core files, tar archives) that are known to contain binary data. When modifying the file /usr/share/misc/magic or the program itself, preserve these keywords People depend on knowing that all the readable files in a directory have the word ``text '' printed. Do not do as Berkeley did and change ``shell commands text '' to ``shell script '' Note that the file /usr/share/misc/magic is built mechanically from a large number of small files in the subdirectory Magdir in the source distribution of this program.
The file system tests are based on examining the return from a stat(2) system call. The program checks to see if the file is empty, or if it is some sort of special file. Any known file types appropriate to the system you are running on (sockets, symbolic links, or named pipes (FIFOs) on those systems that implement them) are intuited if they are defined in the system header file In sys/stat.h .
The magic number tests are used to check for files with data in
particular fixed formats.
The canonical example of this is a binary executable (compiled program)
a.out
file, whose format is defined in
#include <a.out.h>
and possibly
#include <exec.h>
in the standard include directory.
These files have a
`magic number'
stored in a particular place
near the beginning of the file that tells the
UNIX
operating system
that the file is a binary executable, and which of several types thereof.
The concept of
`magic number'
has been applied by extension to data files.
Any file with some invariant identifier at a small fixed
offset into the file can usually be described in this way.
The information identifying these files is read from the compiled
magic file
/usr/share/misc/magic.mgc
or
/usr/share/misc/magic
if the compile file does not exist.
#include <addition>
will look in
$HOME/.magic.mgc
or
$HOME/.magic
for magic entries.
If a file does not match any of the entries in the magic file, it is examined to see if it seems to be a text file. ASCII, ISO-8859-x, non-ISO 8-bit extended-ASCII character sets (such as those used on Macintosh and IBM PC systems), UTF-8-encoded Unicode, UTF-16-encoded Unicode, and EBCDIC character sets can be distinguished by the different ranges and sequences of bytes that constitute printable text in each set. If a file passes any of these tests, its character set is reported. ASCII, ISO-8859-x, UTF-8, and extended-ASCII files are identified as ``text '' because they will be mostly readable on nearly any terminal; UTF-16 and EBCDIC are only ``character data '' because, while they contain text, it is text that will require translation before it can be read. In addition, will attempt to determine other characteristics of text-type files. If the lines of a file are terminated by CR, CRLF, or NEL, instead of the UNIX LF, this will be reported. Files that contain embedded escape sequences or overstriking will also be identified.
Once has determined the character set used in a text-type file, it will attempt to determine in what language the file is written. The language tests look for particular strings (cf names.h that can appear anywhere in the first few blocks of a file. For example, the keyword .br indicates that the file is most likely a troff(1) input file, just as the keyword struct indicates a C program. These tests are less reliable than the previous two groups, so they are performed last. The language test routines also test for some miscellany (such as tar(1) archives).
Any file that cannot be identified as having been written in any of the character sets listed above is simply said to be ``data ''
The one significant difference between this version and System V is that this version treats any white space as a delimiter, so that spaces in pattern strings must be escaped. For example,
">10 string language impress (imPRESS data)"
in an existing magic file would have to be changed to
">10 string language\ impress (imPRESS data)"
In addition, in this version, if a pattern string contains a backslash,
it must be escaped.
For example
"0 string \begindata Andrew Toolkit document"
in an existing magic file would have to be changed to
"0 string \\begindata Andrew Toolkit document"
SunOS releases 3.2 and later from Sun Microsystems include a
file(1)
command derived from the System V one, but with some extensions.
My version differs from Sun's only in minor ways.
It includes the extension of the
`&
'
operator, used as,
for example,
">16 long&0x7fffffff >0 not stripped"
The order of entries in the magic file is significant. Depending on what system you are using, the order that they are put together may be incorrect. If your old command uses a magic file, keep the old magic file around for comparison purposes (rename it to /usr/share/misc/magic.orig )
$ file file.c file /dev/{wd0a,hda}
file.c: C program text
file: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV),
dynamically linked (uses shared libs), stripped
/dev/wd0a: block special (0/0)
/dev/hda: block special (3/0)
$ file -s /dev/wd0{b,d}
/dev/wd0b: data
/dev/wd0d: x86 boot sector
$ file -s /dev/hda{,1,2,3,4,5,6,7,8,9,10}
/dev/hda: x86 boot sector
/dev/hda1: Linux/i386 ext2 filesystem
/dev/hda2: x86 boot sector
/dev/hda3: x86 boot sector, extended partition table
/dev/hda4: Linux/i386 ext2 filesystem
/dev/hda5: Linux/i386 swap file
/dev/hda6: Linux/i386 swap file
/dev/hda7: Linux/i386 swap file
/dev/hda8: Linux/i386 swap file
/dev/hda9: empty
/dev/hda10: empty
$ file -i file.c file /dev/{wd0a,hda}
file.c: text/x-c
file: application/x-executable, dynamically linked (uses shared libs),
not stripped
/dev/hda: application/x-not-regular-file
/dev/wd0a: application/x-not-regular-file
This program, based on the System V version, was written by An Ian Darwin Aq [email protected] without looking at anybody else's source code.
An John Gilmore revised the code extensively, making it better than the first version. An Geoff Collyer found several inadequacies and provided some magic file entries. Contributions by the `& ' operator by An Rob McMahon Aq [email protected] , 1989.
An Guy Harris Aq [email protected] , made many changes from 1993 to the present.
Primary development and maintenance from 1990 to the present by An Christos Zoulas Aq [email protected] .
Altered by An Chris Lowth Aq [email protected] , 2000: Handle the -i option to output mime type strings and using an alternative magic file and internal logic.
Altered by An Eric Fischer Aq [email protected] , July, 2000, to identify character codes and attempt to identify the languages of non- ASCII files.
The list of contributors to the Magdir directory (source for the /usr/share/misc/magic file) is too long to include here. You know who you are; thank you.
The files tar.h and is_tar.c were written by An John Gilmore from his public-domain tar program, and are not covered by the above license.
The utility uses several algorithms that favor speed over accuracy, thus it can be misled about the contents of text files.
The support for text files (primarily for programming languages) is simplistic, inefficient and requires recompilation to update.
There should be an else clause to follow a series of continuation lines.
The magic file and keywords should have regular expression support. Their use of ASCII TAB as a field delimiter is ugly and makes it hard to edit the files, but is entrenched.
It might be advisable to allow upper-case letters in keywords for e.g., troff(1) commands vs man page macros. Regular expression support would make this easy.
The program does not grok FORTRAN It should be able to figure FORTRAN by seeing some keywords which appear indented at the start of line. Regular expression support would make this easy.
The list of keywords in ascmagic probably belongs in the Magic file. This could be done by using some keyword like `* ' for the offset value.
Another optimisation would be to sort the magic file so that we can just run down all the tests for the first byte, first word, first long, etc, once we have fetched it. Complain about conflicts in the magic file entries. Make a rule that the magic entries sort based on file offset rather than position within the magic file?
The program should provide a way to give an estimate of ``how good'' a guess is. We end up removing guesses (e.g. ``From '' as first 5 chars of file) because they are not as good as other guesses (e.g. ``Newsgroups: '' versus ``Return-Path: '' Still, if the others do not pan out, it should be possible to use the first guess.
This program is slower than some vendors' file commands. The new support for multiple character codes makes it even slower.
This manual page, and particularly this section, is too long.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |