The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

dictzip (1)
  • >> dictzip (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    dictzip, dictunzip - compress (or expand) files, allowing random access
     
    

    SYNOPSIS

    dictzip [options] name
    
    dictunzip [options] name
     

    DESCRIPTION

    dictzip compresses files using the gzip(1) algorithm (LZ77) in a manner which is completely compatible with the gzip file format. An extension to the gzip file format (Extra Field, described in 2.3.1.1 of RFC 1952) allows extra data to be stored in the header of a compressed file. Programs like gzip and zcat will ignore this extra data. However, dictd(8), the DICT protocol dictionary server will make use of this data to perform pseudo-random access on the file. Files in the dictzip format should end in ".dz" so that they may be distinguished from common gzip files that do not contain the special header information. From RFC 1952, the extra field is specified as follows:

    If the FLG.FEXTRA bit is set, an "extra field" is present in the header, with total length XLEN bytes. It consists of a series of subfields, each of the form:

    +---+---+---+---+==================================+
    |SI1|SI2|  LEN  |... LEN bytes of subfield data ...|
    +---+---+---+---+==================================+
    

    SI1 and SI2 provide a subfield ID, typically two ASCII letters with some mnemonic value. Jean-Loup Gailly <[email protected]> is maintaining a registry of subfield IDs; please send him any subfield ID you wish to use. Subfield IDs with SI2 = 0 are reserved for future use. LEN gives the length of the subfield data, excluding the 4 initial bytes.

    The dictzip program uses 'R' for SI1, and 'A' for SI2 (i.e., "Random Access"). After the LEN field, the data is arranged as follows:

    +---+---+---+---+---+---+===============================+
    |  VER  | CHLEN | CHCNT |  ... CHCNT words of data ...  |
    +---+---+---+---+---+---+===============================+
    

    As per RFC 1952, all data is stored least-significant byte first. For VER 1 of the data, all values are 16-bits long (2 bytes), and are unsigned integers. XLEN (which is specified earlier in the header) is a two byte integer, so the extra field can be 0xffff bytes long, 2 bytes of which are used for the subfield ID (SI1 and SI1), and 2 bytes of which are used for the subfield length (LEN). This leaves 0xfffb bytes (0x7ffd 2-byte entries or 0x3ffe 4-byte entries). Given that the zip output buffer must be 10% + 12 bytes larger than the input buffer, we can store 58969 bytes per entry, or about 1.8GB if the 2-byte entries are used. If this becomes a limiting factor, another format version can be selected and defined for 4-byte entries. For compression, the file is divided up into "chunks" of data, each chunk is less than 64kB, and can be compressed into an area that is also less than 64kB long (taking incompressible data into account -- usually the data is compressed into a block that is much smaller than the original). The CHLEN field specifies the length of a "chunk" of data. The CHCNT field specifies how many chunks are preset, and the CHCNT words of data specifies how long each chunk is after compression (i.e., in the current compressed file). To perform random access on the data, the offset and length of the data are provided to library routines. These routines determine the chunk in which the desired data begins, and decompresses that chunk. Consecutive chunks are decompressed as necessary.  

    TRADEOFFS

    Speed
    True random file access is not realized, since any access, even for a single byte, requires that a 64kB chunk be read and decompressed. This is slower than accessing a flat text file, but is much, much faster than performing serial access on a fully compressed file.
    Space
    For the textual dictionary databases we are working with, the use of 64kB chunks and maximal LZ77 compression realizes a file which is only about 4% larger than the same file compressed all at once.
     

    OPTIONS

    -d or --decompress
    Decompress. This is the default if the executable is called dictunzip.
    -c or --stdout
    Write output on standard output; keep original files unchanged. This is only available when decompressing (because parts of the header must be updated after a write when compressing).
    -f or --force
    Force compression or decompression even if the output file already exists.
    -h or --help
    Display help.
    -k or --keep
    Do not delete the original file.
    -l or --list
    For each compressed file, list the following fields:


        type: dzip, gzip, or text (includes files in unknown formats)
        crc: CRC checksum
        date and time: from header
        chunks: number of chunks in file
        size: size of each uncompressed chunk
        compr.: compressed size
        uncompr.: uncompressed size
        ratio: compression ratio (0.0% if unknown)
        name: name of uncompressed file

    Unlike gzip, the compression method is not detected.

    -L or --license
    Display the dictzip license and quit.
    -t or --test
    Check the compressed file integrity. This option is not implemented. Instead, it will list the header information.
    -v or --verbose
    Verbose. Display extra information during compression.
    -V or --version
    Version. Display the version number and compilation options then quit.
    -s start or --start start
    Specify the offer to start decompression, using decimal numbers. The default is at the beginning of the file.
    -e size or --size size
    Specify the size of the portion of the file to decompress, using decimal numbers. The default is the whole file.
    -S start or --Start start
    Specify the offer to start decompression, using base64 numbers. The default is at the beginning of the file.
    -E size or --Size start
    Specify the size of the portion of the file to decompress, using base64 numbers. The default is the whole file.
    -p prefilter or --pre prefilter
    Specify a shell command to execute as a filter before compression or decompression of a chunk. The pre- and post-compression filters can be used to provide additional compression or output formatting. The filters may not increase the buffer size significantly. The pre- and post-compression filters were designed to provide the most general interface possible.
    -P postfilter or --post postfilter
    Specify a shell command to execute as a filter after compression or decompression.
     

    CREDITS

    dictzip was written by Rik Faith ([email protected]) and is distributed under the terms of the GNU General Public License. If you need to distribute under other terms, write to the author. The main libraries used by this programs (zlib, regex, libmaa) are distributed under different terms, so you may be able to use the libraries for applications which are incompatible with the GPL -- please see the copyright notices and license information that come with the libraries for more information, and consult with your attorney to resolve these issues.  

    SEE ALSO

    dict(1), dictd(8), gzip(1), gunzip(1), zcat(1)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    TRADEOFFS
    OPTIONS
    CREDITS
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру