Интерактивная система просмотра системных руководств (man-ов)
foo2oak-wrapper (1)
>> foo2oak-wrapper (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream
SYNOPSIS
foo2oak-wrapper
[options] [ps-file]
DESCRIPTION
foo2oak-wrapper
is a Foomatic compatible printer wrapper for the foo2oak printer driver.
This script reads a Postscript ps-file or standard input
and converts it to Oak Technology OAKT printer format
for driving the HP Color LaserJet 1500 laser printer
and other OAKT-based printers.
This script can be used in a standalone fashion, but is intended to
be called from a printer spooler system which uses the Foomatic
printer database.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a
print job that are usually controlled on a per job basis.
-b bits
Number of bits per plane (1 or 2) [1].
-c
Print in color (else monochrome).
-m media
Media code to send to printer [1].
1 standard 259 letterhead
2 transparency 261 thickstock
3 glossy 262 postcard
257 envelope 263 labels
-p paper
Paper size code to send to printer [1].
1 letter 9 A4
5 legal 11 A5
7 executive 13 B5
-n copies
Number of copies [1].
-r xresxyres
Set device resolution in pixels/inch [600x600].
-s source
Source (Input Slot) code to send to printer [7].
1 upper 4 manual
7 auto
-2
Print in 2-up. Requires the psutils package.
-4
Print in 4-up. Requires the psutils package.
Printer Tweaking Options
These are the options used to customize the operation of foo2oak
for a particular printer.
-u xoffxyoff
Set the offset of the start of the printable region from the
upper left corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-l xoffxyoff
Set the offset of the end of the printable region from the
lower right corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-L mask
Send the logical clipping values from -u/-l in the OAKT stream.
foo2oak-wrapper always runs Ghostscript with the ideal page dimensions,
so that the scale of the image is correct,
regardless whether or not the printer has unprintable regions.
This option is used to move the position of the clipped image
back to where it belongs on the page. The default is to send
the amount which was clipped by -u and -l, and should be
good in most cases.
NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream
SYNOPSIS
foo2oak-wrapper
[options] [ps-file]
DESCRIPTION
foo2oak-wrapper
is a Foomatic compatible printer wrapper for the foo2oak printer driver.
This script reads a Postscript ps-file or standard input
and converts it to Oak Technology OAKT printer format
for driving the HP Color LaserJet 1500 laser printer
and other OAKT-based printers.
This script can be used in a standalone fashion, but is intended to
be called from a printer spooler system which uses the Foomatic
printer database.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a
print job that are usually controlled on a per job basis.
-b bits
Number of bits per plane (1 or 2) [1].
-c
Print in color (else monochrome).
-m media
Media code to send to printer [1].
1 standard 259 letterhead
2 transparency 261 thickstock
3 glossy 262 postcard
257 envelope 263 labels
-p paper
Paper size code to send to printer [1].
1 letter 9 A4
5 legal 11 A5
7 executive 13 B5
-n copies
Number of copies [1].
-r xresxyres
Set device resolution in pixels/inch [600x600].
-s source
Source (Input Slot) code to send to printer [7].
1 upper 4 manual
7 auto
-2
Print in 2-up. Requires the psutils package.
-4
Print in 4-up. Requires the psutils package.
Printer Tweaking Options
These are the options used to customize the operation of foo2oak
for a particular printer.
-u xoffxyoff
Set the offset of the start of the printable region from the
upper left corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-l xoffxyoff
Set the offset of the end of the printable region from the
lower right corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-L mask
Send the logical clipping values from -u/-l in the OAKT stream.
foo2oak-wrapper always runs Ghostscript with the ideal page dimensions,
so that the scale of the image is correct,
regardless whether or not the printer has unprintable regions.
This option is used to move the position of the clipped image
back to where it belongs on the page. The default is to send
the amount which was clipped by -u and -l, and should be
good in most cases.
NAME
foo2oak-wrapper - Convert Postscript into an OAKT printer stream
SYNOPSIS
foo2oak-wrapper
[options] [ps-file]
DESCRIPTION
foo2oak-wrapper
is a Foomatic compatible printer wrapper for the foo2oak printer driver.
This script reads a Postscript ps-file or standard input
and converts it to Oak Technology OAKT printer format
for driving the HP Color LaserJet 1500 laser printer
and other OAKT-based printers.
This script can be used in a standalone fashion, but is intended to
be called from a printer spooler system which uses the Foomatic
printer database.
COMMAND LINE OPTIONS
Normal Options
These are the options used to select the parameters of a
print job that are usually controlled on a per job basis.
-b bits
Number of bits per plane (1 or 2) [1].
-c
Print in color (else monochrome).
-m media
Media code to send to printer [1].
1 standard 259 letterhead
2 transparency 261 thickstock
3 glossy 262 postcard
257 envelope 263 labels
-p paper
Paper size code to send to printer [1].
1 letter 9 A4
5 legal 11 A5
7 executive 13 B5
-n copies
Number of copies [1].
-r xresxyres
Set device resolution in pixels/inch [600x600].
-s source
Source (Input Slot) code to send to printer [7].
1 upper 4 manual
7 auto
-2
Print in 2-up. Requires the psutils package.
-4
Print in 4-up. Requires the psutils package.
Printer Tweaking Options
These are the options used to customize the operation of foo2oak
for a particular printer.
-u xoffxyoff
Set the offset of the start of the printable region from the
upper left corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-l xoffxyoff
Set the offset of the end of the printable region from the
lower right corner, in pixels [varies with paper size].
The defaults should work on the 2200DL and 2300DL, and have not
been tested on any other printers.
-L mask
Send the logical clipping values from -u/-l in the OAKT stream.
foo2oak-wrapper always runs Ghostscript with the ideal page dimensions,
so that the scale of the image is correct,
regardless whether or not the printer has unprintable regions.
This option is used to move the position of the clipped image
back to where it belongs on the page. The default is to send
the amount which was clipped by -u and -l, and should be
good in most cases.
end any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
Color Tweaking Options
These are the options used to control the quality of color output.
Color correction is currently a WORK IN PROGRESS.
-g gsopts
Additional options to pass to Ghostscript, such as -glq-dDITHERPPI=nnnrq,
etc. This option may appear more than once.
-G profile.icm
Convert profile.icm to a Postscript color rendering
dictionary (CRD) using foo2zjs-icc2ps and
adjust the printer colors by using the Postscript setcolorrendering
operator. (WORK IN PROGRESS).
-G gamma-file.ps
Prepend gamma-file.ps to the Postscript input to perform
color correction using the setcolortransfer Postscript operator.
For example, the file might contain:
{0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
Debugging Options
These options are used for debugging foo2oak and its wrapper.
-S plane
Output just a single color plane from a color print and print it
on the black plane. The default is to output all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
-D level
Set Debug level [0].
EXAMPLES
Create a monochrome OAKT stream from a Postscript document,
examine it, and then print it using a RAW print queue:
