[ новости /+++ | форум | теги | ]

NAME

psh - Perl SHell
 

SYNOPSIS

COPYRIGHT

DESCRIPTION

By default within psh, the Perl -w flag and '"use strict"' are not employed so that the user is not bound by their stipulations. They can both be turned on via a command-line flag; or setting "$^W = 1" will turn on warnings, and calling '"use strict"' will (almost) do the usual thing if called by the user (see LIMITATIONS, below).

Each line of input is read. psh knows a number of possible strategies for evaluating the line, such as "send it to "system()" if it starts with the name of an executable visible in "$ENV{PATH}"". (See below for a complete list.) Each strategy in turn (from a user-definable list) examines the command line to see if it can apply, and the first matching strategy evaluates the line. There is a psh configuration variable (see below) which controls whether the perl value of the evaluation is saved and printed after each command.

psh automatically collects several lines of input into a unit processed as a single line if there are unfinished Perl constructs on the line. In particular, if there is an unmatched quote, paren, brace, or square bracket, input is read until these characters match. If an input line contains the Perl ``here document'' construct as in "<<XXX", (anywhere on the line), then input is read and accumulated until "XXX" occurs on a line by itself. Then the accumulated input is processed as if it were a single line.  

OPTIONS

 psh [-d [options]] [-w] [-f RC_FILE] [-c STRING ] [FILE1 FILE2 ....]

* -w

Enables Perl's warning mode. The -w switch runs perl with the -w switch and ``use strict;''.

* -d [debug options]

The -d option puts psh into ``debugging'' mode, which prints diagnostic output. Note that you can also enter/leave this debugging mode in a running psh via the "$Psh::debugging" variable.

* -i

Only for compatibility reasons and ignored by Perl Shell.

* -f file

The -f option specifies a file of commands to be read in and evaluated before processing begins. If it is not set, and "$ENV{HOME}" is set, and the file $ENV{HOME}/.pshrc is present, it will be used. If -r is not specified and the current directory is different from "$ENV{HOME}" and it contains a .pshrc file, that file will be read and executed in addition to $ENV{HOME}/.pshrc.

* -c string

If the -c flag is present, then commands are read from "string", and then psh exits. In particular, any FILE1 ... arguments will be ignored.

If any FILE1 ... arguments are specified on the command line, they will be read and executed and then psh will exit. Otherwise, psh will enter an interactive command loop.  

TOKENIZATION

If the description of the strategy does not mention the ``words'', then the tokenization is irrelevant to that strategy.  

STANDARD EVALUATION STRATEGIES

* comment

* comment

If the first word of the input line begins with a '#' character, ignore the line.

* bang

* bang

If the first word of the input line begins with a '!' character, send everything after the '!' to system().

* brace

* brace

If the first word of the input line begins with a '{' character, evaluate the entire line as a Perl expression (including the brace).

* built_in

* built_in

If the first word of the input line matches a psh ``built-in'' function, call the subroutine associated with that built-in; the subroutine receives a single argument, which is the remainder of the input line exactly as entered.

* perlfunc

* perlfunc

If the first word of the input line matches the name of a defined Perl subroutine - or - if $Psh::Strategy::Perlfunc::builtins is set a built-in Perl function (as determined by the %Psh::Strategy::Perlfunc::perl_builtins hash), pass the line to eval. If "$Psh::Strategy::Perlfunc::expand_arguments" is true and the line contains no parens, or braces or commas (except for {a,b,c} as in shell brace-expansion), then this strategy tries to interpret the arguments on the command line in a ``shell-like'' manner: strings are literal except for variable expansion, brace expansion, and glob expansion.

The idea of this strategy is to allow perl functions, especially subroutines in main, to be called like ``ordinary commands'' (i.e., executables on disk). Or put another way, the idea is to replace bash's ``shell function'' capacity with ordinary Perl subroutines. The slogan is, ``If the command line looks like an ordinary shell command, interpret it like one, even if the first word is a Perl subroutine.''

* auto_resume (not enabled by default)

* auto_resume (not enabled by default)

If the input line matches the name of a stopped job then brings that job to the foreground instead of starting a new programm with that name.

* perlscript (not enabled by default)

* perlscript (not enabled by default)

If (1) the first word of the input line matches the name of a file found in one of the directories listed in the path ("$ENV{PATH}"), and (2) that file starts with "#!/.../perl", and (3) that "perl" is the same as the Perl under which psh is running, psh will fork and run the script using the already-loaded Perl interpreter. The idea is to save the exec half of the fork-exec that the executable strategy would do; typically the exec is more expensive. Right now this strategy can only handle the -w command-line switch on the "#!" line. Note this strategy only makes sense before the ``executable'' strategy; if it came after, it could never trigger.

* executable

* executable

If the first word of the input line matches the name of an executable file in the path given by "$ENV{PATH}", then pass the line to system. Perl variable substitution will be done on the line first if the "$Psh::executable_expand_arguments" configuration variable is true and the binary which is executed does not match one of the regular expresions in "@Psh::executable_noexpand"

* fallback_builtin

* fallback_builtin

If the first word of the input line is a ``fallback builtin'' provided for operating systems that do not have common binaries --- such as ``ls'', ``env'', etc, then call the associated subroutine like an ordinary builtin. If you want all of these commands to be executed within the shell, you can move this strategy ahead of executable.

* eval

* eval

Pass the line to eval, regardless of any condition. This is a catch-all strategy; strategies placed after it will never be triggered.

The list of evaluation strategies to try is kept in the configuration variable "@Psh::strategies", which defaults to "qw(comment bang brace built_in executable fallback_builtin eval)". If you want to ensure that ``print'' (for example) refers to the Perl function ``print'' and not ``/usr/bin/print'', try adding the ``perlfunc'' strategy before ``executable''.  

GLOBBING

In addition, Perl Shell knows the very powerful '**' globbing, replacing many "find"s in your daily work. '**' will be replaced by 'current directories and all sub directories'. For example:

    grep foo lib/**/*.pm

PIPELINES

    cat a.txt b.txt | wc -l

MANIFEST FILTERS

There are three kinds of manifest filters: quick, grep and substitution.

A quick filter consists of a block of code surrounded by curly braces, with a trailing '"q"' modifier. The Perl Shell turns this into a line-by-line filter. For the code in the braces, "$_" will contain the line as it was read from input (including any end-of-line character). The filter block should

     ls | { print ++$i, ": $_"; }q

     netstat | { $_[1]>2; }g

    ls | s/a/b/

    ls | { s/a/b/; print; }q

BUILT-IN FUNCTIONS

For details about the implementation of built-ins, please see the pshdevel manpage.  

PSH SCALAR VARIABLES

$Psh::bin (the basename of the file psh was invoked by)

The name of the current shell.

$Psh::cmd

The command serial number in the currently-executing processing loop.

$Psh::currently_active (0)

The pid of the process psh will currently forward signals to, or 0 if psh will handle the signals internally. Usually 0 unless psh is waiting for a process in the ``foreground''.

$Psh::debugging (the value of the -d option or 0)

Whether psh's internal debugging output should be produced. If this variable is set to 1, all available debug output will be shown. If this is set to a string to characters, only debug output belonging to the classes signified by the characters will be shown. Debug classes etc. are in pshdevel

$Psh::echo (0)

Controls whether the processing loop saves and displays the Perl value of executing a line of input. Three cases are distinguished: a false value, in which case no results are displayed; a subroutine reference, in which case the subroutine is called with the results (this may be multiple arguments if the eval returned an array) and should return true to display, false to not; or a true (scalar) value, in which case any non-undef, non-empty value is displayed.

In addition to displaying the value, it is pushed onto the array determined by "$Psh::result_array". Note that scalar values are pushed directly onto this array, but array values are pushed by reference.

$Psh::eval_preamble (package main;)

$Psh::eval_preamble (``package main;'')

Every Perl expression that psh evaluates as part of its read-eval loop is prepended with this string, intended primarily to set the expected package context.

$Psh::executable_expand_arguments (0)

If this variable is true, then the following procedure is applied to each argument ARG of the command line before passing the command line on to ``system'': If ARG starts with a single quote, it is untouched. If ARG starts with a double quote, it is passed to ``eval'', and then double quotes are placed around the result. Otherwise, double quotes are placed around ARG, it is passed to eval, and the result is used directly. The intention of these steps is to do variable substitution of perl variables that appear in the command line as the user would expect, and in a way similar to shells such as bash. For example, if @files = (file1, file2, file3), then
 'ls @files' will expand to 'ls file1 file2 file3', whereas
 'echo ``@files''' will expand to 'echo ``file1 file2 file3'''.

$Psh::handle_segfaults (0)

If set to true, psh will ignore all segfaults and attempt to continue.

$Psh::ignore_die (0)

If set to true, psh will attempt to continue after internal errors.

$Psh::history_file ($ENV{HOME}/.${bin}_history) [late]

$Psh::history_file (``$ENV{HOME}/.${bin}_history'') [late]

The filename psh will use to save the command history in from one invocation to the next, if "$Psh::save_history" is true.

$Psh::history_length (50) [late]

The number of lines of command history to keep.

$Psh::host (the output of hostname -s) [late]

$Psh::host (the output of ``hostname -s'') [late]

The short host name of the machine psh is currently running on.

$Psh::interactive

This is not a customization variable but a flag which tells wether you are currently in interactive mode (1) or processing a file (0)

$Psh::login_shell (0)

Set to true if psh is the user's login shell. On systems where this does not apply, set to true unless called from another instance of psh.

$Psh::longhost (the output of hostname) [late]

$Psh::longhost (the output of ``hostname'') [late]

The fully qualified host name of the machine psh is running on.

$Psh::prompt ('\s\$') [late]

Controls the prompt string in interactive use, see below.

$Psh::prompt_cont ('> ') [late]

Just like $Psh::prompt, but for continuation lines when multi-line input is being read.

$Psh::window_title ('\w')

Controls the window title in interactive use. See prompt evaluation for escape codes.

$Psh::result_array ('Psh::val')

Controls where the results of Perl evaluations saved via "$Psh::echo" will go. It may be a reference to an array, or the string name of an array.

$Psh::save_history (1) [late]

If this is true, the command history is saved in "$Psh::history_file" from one invocation of psh to the next.

$Psh::which_regexp ('^[-a-zA-Z0-9_~+]*$')

When "Psh::Util::which" is asked to locate a filename in the current PATH, it will only look for filenames which match this regexp. Names that do not match this regexp will automatically come back ``not found''.

$Psh::Strategy::Perlfunc::builtins (0)

If this variable is true, the perlfunc evaluation strategy will also match those Perl builtins determined by %Psh::perl_builtins

$Psh::Strategy::Perlfunc::packages (1)

If this variable is true, the perlfunc evaluation strategy will also match functions with full package specification

$Psh::Strategy::Perlfunc::expand_arguments (0)

If this variable is true, then command lines interpreted by the perlfunc strategy which contain no parens, or braces or commas except in bash-like brace-expansion expressions, will not be simply evaluated. Rather, they will be interpreted much like traditional shells do: the line will be spilt into words, which undergo globbing, brace expansion, and variable expansion, and the resulting array of words is passed to the specified function as its arguments.

PSH ARRAY VARIABLES

@Psh::Completion::bookmarks ( from /etc/hosts )

Supposed to contain your most used IP numbers, hostnames or URLs. Those will be eligible for TAB completion if you add a command for completion using complete "-A" hostname command. "psh" will initialize this list with your /etc/hosts file

@Psh::executable_noexpand ( whois, ^ezmlm-, etc. )

Contains regular expressions. If $Psh::executable_expand_arguments is set commands which match one of these REs won't have perl variables expanded. This is especially useful for commands which expect email adresses, and therefore an at-sign.

@Psh::history

An array of lines to write to the history file when psh exits, only filled when the ReadLine module doesn't handle the history file.

@Psh::mon ( Jan, Feb, etc. )

An array of month names used in printing dates, for example in prompt strings.

@Psh::strategies ( comment, bang, built_in, executable, eval)

The list of strategies for executing a line, tried in order.

@Psh::val

The default array where psh stores away the results of executing lines, as described in "$Psh::echo" above.

@Psh::wday ( Mon, Tue, Wed, Thu, Fri, Sat)

An array of the weekday names used in printing dates, for example in prompt strings.

PSH HASH VARIABLES

%Psh::array_exports

Contains a list of environment variables which should be tied to arrays. The key of the hash is the name of the variable, the value is the delimiter of the list (e.g. ':' in PATH). The default value for array_exports currently contains PATH, CLASSPATH, LD_LIBRARY_PATH, FIGNORE and CDPATH.

%Psh::built_ins

The keys are command names, the values do not matter. Builtins on this list may be autoloaded. This is initialized on startup by &Psh::Builtins::built_autoload_list() - please see pshdevel for more information.

%Psh::fallback_builtins

A list of fallback builtins Psh should provide. This currently defaults to ls and env.

%Psh::Strategy::Perlfunc::perl_builtins (by default, all Perl builtins and keywords)

The perlfunc evaluation strategy uses this hash on the first word of a command line to determine whether it should handle that command line. If the first word is present as a key in this hash, then the corresponding value determines the treatment: 0 means don't handle this line; any positive value means do handle the line as long as it has at least that many words. (Since the first word counts, a value of '1' will guarantee that the perlfunc strategy handles the line.) Useful for example to set "$Psh::perl_builtins{grep} = 0;" if you don't want ``grep'' to be treated as a perl function.

Note that the perlfunc strategy will also handle the line if the first word is not present as a key in this hash but a Perl subroutine of that name is defined.

%Psh::Strategy::Perlfunc::perl_builtins_noexpand (by default, Perl flow-control keywords)

The keys of this hash never have their arguments expanded in a shell-like fashion, even if $Psh::perlfunc_expand_arguments is true.

%Psh::prompt_vars

The keys of this hash are single characters, and the values are subroutine references that implement the given escape character in prompt strings. (See the PROMPT STRINGS entry elsewhere in this document below.)

%Psh::strategy_which

%Psh::strategy_eval

These hashes implement the named strategies used in psh's evaluation of input lines. It is possible to add new strategies, see below.

PSH FUNCTIONS

&Psh::evl

&Psh::evl

This function takes a string, evaluates it as if it were a line of psh input, and returns the value. Useful in loops like:

 C<psh$ for $file (glob $pat) { Psh::evl("ls -ld $file"); }>

&Psh::is_number

&Psh::is_number

Returns true if its first argument is a number. Intended for use in filter subroutines placed in $Psh::echo. For example, "$Psh::echo = \&Psh::is_number;" will cause only numeric return values to be printed.

&Psh::news

&Psh::news

Returns the current news, as a string.

&Psh::Util::print_debug, print_error, print_out, print_warning

&Psh::Util::print_debug, print_error, print_out, print_warning

These four functions are called whenever psh wants to produce -d-mode output, error messages, normal output, and warnings, respectively. They could conceivably be redefined to implement logging or similar facilities.

&Psh::symbols

&Psh::symbols

Takes one argument, a package name, and shows all of the symbols in that package.

There are other functions in the psh:: package, but they are probably not useful except internally to psh.  

PROMPT STRINGS

  $Psh::prompt = sub { $i++; "psh [$i]\$ "; }

psh uses some of the same ``prompting variables'' as bash. They are accessed by placing a backslash followed by the code in the prompt string, either hard coded, or as returned by the prompt string function. The variables supported are:

d The date in ``Weekday Month Day'' format

E The escape character

h The short hostname

H The long hostname

n A carriage return and line feed

s The name of the shell

t The current time in HH:MM:SS format

u The username of the current user

w The current working directory

W The basename of the current working directory

# The command number of the current command

$ `#' if the effective UID is zero, else `$'

[ ] Used for Term::ReadLine::Gnu to ignore control characters while determining the length of the prompt

Please note that bash's support of backticks to execute code from within the prompt is not supported in psh. Instead use the newer syntax \$(command) which is also support by bash.

Custom prompting variables may be added by adding entries to the array %Psh::prompt_vars keyed by the single character code. The entries should be subroutine references that return the replacement string.  

LIMITATIONS

The loop inside psh will clobber $1 and other variables (including possible $_) because it uses matches to implement some of its special functions.

Right now, job control simply assumes that the POSIX interface is fully implemented. There should be a way to turn job control off if this is not the case.

The ``exit status'' of programs invoked in the foreground by the ``executable'' strategy (or even the ``bang'' strategy) isn't available from within psh.

Note that since expressions like 'use foo' return undef when sent to eval(), it is not possible to use that return value as indication of an error. Instead, we use the heuristic that there was no error unless the special Perl variable '$@' is non-empty. Note that the side effects of 'use foo' as a psh command line appear to be exactly as expected.  

REQUIREMENTS

Term::ReadLine::Gnu or Term::ReadLine::Perl for readline support (command history, special editing chars etc.).

Term::Size or Term::ReadKey to offer the ability to change the environment variables LINES and COLUMNS when the terminal window size changes while running as standard shell

OTHER PERL SHELLS

Larry Walls' Perl Shell

lpsh

He has placed it on the web at "http://www.dfw.nostrum.com/~leakin/psh" (for the code) and "http://www.dfw.nostrum.com/~leakin/psh.README" for a short explanation of the code and a reference to the main Perl Shell site.  

Perl Debugger Shell

perlsh

PSH.pm

SoftList

timtosh

vbsh

Comparison of perl shells

  Key to features:
    PE : Perl evaluation of Perl expressions
    SHE: shell-like evaluation of shell-like expressions, including 
         'exec'ing executables searched for in PATH
    CLE: command-line editing
    JC : job control
    PL : pipelines

  Key to symbols:
    * : feature present
    - : feature absent
    ? : don't know

  The shells:

    Shell Name         PE    SHE   CLE    JC    PL

 psh (this one)         *     *     *     *     *            
 Larry Wall shell       *     -     -     -     -
 lpsh                   *     -     *     -     -
 Perl debugger shell    *     -     *     -     -
 perlsh                 *     -     *     -     -
 Krynicky PSH.pm        *     *     ?     -     ?
 SoftList               *     ?     *     ?     ?
 timtosh                -     *     *     *     *
 vbsh                   ?     ?     ?     ?     -

ENVIRONMENT VARIABLES

FIGNORE - A list (separated by the path separator) of file endings to ignore when performing TAB completion. No default.

HISTSIZE - The maximum number of lines to save in the history file. Defaults to 50.

IGNOREEOF - Controls the action of the shell on receipt of an EOF character as the sole input. If set, the value is the number of consecutive EOF characters typed as the first characters on an input line before bash exits. If the variable exists but does not have a numeric value, the default value is 10. If it does not exist, EOF signifies the end of input to the shell.

LANG - Sets the language of the shell.

SHLVL - The number of shells deep that psh is nested. Initially set to 1. Many other shells do not increment this variable, so it is not authoritative.

PS1 - If $Psh::prompt is unset, psh will try to use this environment variable as prompt.

PS2 - If $Psh::prompt_cont is unset, psh will try to use this variable as continuation prompt.

PSH_TITLE - If $Psh::window_title is unset, psh will try to use this variable as window title.

USER - The name of the current user  

FILES

.pshrc - The user's Perl Shell `profile'. May be in "$HOME" or the current directory; if both are present, both will be read in the order mentioned.  

AUTHOR

CREDITS

Prodigious Contributors

Markus Peter <[email protected]> added job and signal handling, globbing, redirection, pipelines, parts of completion code, Win32 port, i18n code, some bash compatibility builtins and environment variables and some more minor updates.

Glen Whitney <[email protected]> added evaluation strategies, improved interrupt/job handling, "&Psh::evl", "$Psh::echo", more extensive documentation, and other more minor features.

Omer Shenker <[email protected]> added file locking, Win32 code, login shell handling, various bits of documentation, and other minor features and updates.

Hiroo Hayashi <[email protected]> added the current, bash compatible support for programmable completions and some small fixes

ReadLine Support

Code examples showing how to apply the Term::ReadLine package were contributed by Billy Naylor <[email protected]> (in his "pash.pl" program, which is his own Perl shell).

Symbol Table Dumping

Billy Naylor <[email protected]> also had an example of a symbol table printing function that was used as the starting point for the "psh" function "psh::symbols()". The "psh" version adds the ability to specify a package name, and it also filters out some special variables. The implementation technique is also different from Billy's.

Prompt String Variables

Matthew D. Allen <[email protected]> contributed an enhanced prompt string handling routine that emulates the "bash" prompt variables. This was expanded into the form now present.

Typo Spotting

Allan Kelly <[email protected]> found some problems with the generated documentation.

Index

NAME

SYNOPSIS

COPYRIGHT

DESCRIPTION

OPTIONS

TOKENIZATION

STANDARD EVALUATION STRATEGIES

GLOBBING

PIPELINES

MANIFEST FILTERS

BUILT-IN FUNCTIONS

PSH SCALAR VARIABLES

PSH ARRAY VARIABLES

PSH HASH VARIABLES

PSH FUNCTIONS

PROMPT STRINGS

LIMITATIONS

REQUIREMENTS

OTHER PERL SHELLS

Larry Walls' Perl Shell

lpsh

Perl Debugger Shell

perlsh

PSH.pm

SoftList

timtosh

vbsh

Comparison of perl shells

ENVIRONMENT VARIABLES

FILES

AUTHOR

CREDITS

Партнёры:

Хостинг: