[ новости /+++ | форум | теги | ]

NAME

fcinfo, fcadm - Fibre Channel HBA Port Command Line Interface
 

SYNOPSIS

fcinfo hba-port [-lit] [HBA_port_WWN]...

fcadm hba-port [-lit] [HBA_port_WWN]...

fcinfo remote-port [-ls] [-p HBA_port_WWN] 
    [REMOTE_port_WWN]...

fcadm remote-port [-ls] [-p HBA_port_WWN] 
    [REMOTE_port_WWN]...

fcinfo logical-unit | lu [-v] [OS device_path]

fcadm logical-unit | lu [-v] [OS device_path]

fcadm create-npiv-port -p Virtal_Port_WWN [-n Virtual_Node_WWN] 
    PhysicalPort_port_WWN

fcadm delete-npiv-port -p Virtal_Port_WWN [-n Virtual_Node_WWN] 
    PhysicalPort_port_WWN

fcinfo [-V]

fcadm [-V]

fcinfo [-?]

fcadm [-?]

DESCRIPTION

fcinfo and fcadm are command line interfaces that collect administrative information on fibre channel host bus adapter (HBA) ports on a host. They also collect data on any fibre channel targets that might be connected to those ports in a Storage Area Network (SAN).

A port can be either in initiator mode or target mode. The same FC attribute information and remote port information are applied to both the initiator and the target modes port except that SCSI-related operations described below do not apply for the target mode port.  

SUBCOMMANDS

The following subcommands are supported by both fcinfo and fcadm:

hba-port

Lists information for the HBA port referenced by the specified HBA_port_WWN. If HBA_port_WWN is not specified, all initiator mode and target mode fibre channel HBA ports on the host will be listed.

remote-port

Lists the remote-port information for those remote ports that are specified. If no REMOTE_port_WWN is specified, all remote ports that are visible through HBA_port_WWN are listed.

logical-unit | lu

Lists the logical unit referenced by the specified device_path. If device_path is not specified, all fibre channel logical units will be listed. This subcommand applies only to the initiator mode.

The following subcommands, which administer N_Port ID Virtualization (NPIV) HBA ports, are supported only by fcadm:

create-npiv-port

Create an NPIV virtual port on the specified adapter.

delete-npiv-port

Delete an NPIV virtual port. This delete only ports create by fcadm.

OPTIONS

The following options are supported:

-l, --linkstat

Lists the link error statistics information for the port referenced by the specified HBA_port_WWN or REMOTE_port_WWN.

-i [HBA_node_WWN], -initiator [HBA_node_WWN]

Lists the information for the port with the initiator mode referenced by the specified HBA_node_WWN or all initiator mode ports discovered in the host.

-n HBA_node_WWN, --node HBA_node_WWN

When used with NPIV options, specify a virtual node WWN. If used with create-npiv-port, it can be omitted, and a random based WWN will be used. It is mandatory for delete-npiv-port.

-p HBA_port_WWN, --port HBA_port_WWN

Retrieve remote port information from the HBA_port_WWN of the local HBA port on the host. When used with the remote-port subcommand, the -p option is mandatory.

When used with NPIV options, specify a virtual port WWN. If used with create-npiv-port, it can be omitted, and a random based WWN will be used. It is mandatory for delete-npiv-port.

-s, --scsi-target

Lists the SCSI target information for all remote ports the user has asked for. The -p, --port option must always be specified and must be a valid HBA port on the host. This HBA port will be used as the initiator for which to retrieve the SCSI level target information. Note that this will only function on remote port fibre channel World-Wide Names that support an FC4 type of SCSI. This option applies only to an initiator mode port.

-t [HBA_node_WWN], -target [HBA_node_WWN]

Lists the information for the port with the target mode referenced by the specified HBA_node_WWN or all target mode ports discovered in the host.

-v, --verbose

When used with the logical-unit subcommand, the -v displays additional information for the logical unit, including SCSI vendor and product information and device type as well as the FC World-Wide names for the local and remote fibre channel ports to which this device is attached.

-V, --version

Displays the version information.

-?, --help

Displays the usage information.

EXAMPLES

Example 1 Listing All HBA Ports

The following command lists all initiator mode fibre channel HBA ports on the host:

# fcinfo hba-port

HBA Port WWN: 210000e08b074cb5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c1
       Manufacturer: QLogic Corp.
       Model: 375-3108-xx
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Serial Number: not available
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: N-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200000e08b074cb5
NPIV Port List:
       Virtual Port 1:
        Port WWN: 200000e08b074cb1
        Node WWN: 200000e08b074cb3
HBA Port WWN: 210100e08b274cb5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c2
       Manufacturer: QLogic Corp.
       Model: 375-3108-xx
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Serial Number: not available
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: N-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200100e08b274cb5
HBA Port WWN: 210000e08b072ab5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c3
       Manufacturer: QLogic Corp.
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Model: 375-3108-xx
       Serial Number: not available
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: L-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200000e08b072ab5
HBA Port WWN: 210100e08b272ab5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c4
       Manufacturer: QLogic Corp.
       Model: 375-3108-xx
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Serial Number: 0402F00-0549112808
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: N-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200100e08b272ab5    

Example 2 Listing Target Mode HBA Ports

The following command lists all target mode fibre channel HBA ports on the host:

# fcinfo hba-port -t
 HBA Port WWN: 210100e08bb09221
    Port Mode: Target
    Port ID: 10700
    OS Device Name: Not Applicable
    Manufacturer: QLogic Corp.
    Model: d30ac7e0
    Firmware Version: 4.0.109
    FCode/BIOS Version: N/A
    Type: F-port
    State: online
    Supported Speeds: not established
    Current Speed: 2Gb
    Node WWN: 200100e08bb09221
 HBA Port WWN: 210000e08b909221
    Port Mode: Target
    Port ID: 10900
    OS Device Name: Not Applicable
    Manufacturer: QLogic Corp.
    Model: d37ad1e0
    Firmware Version: 4.0.109
    FCode/BIOS Version: N/A
    Type: F-port
    State: online
    Supported Speeds: not established
    Current Speed: 2Gb
    Node WWN: 200000e08b909221

Example 3 Listing HBA Ports and Link Statistics

The following command lists information for the HBA ports and the link statistics for those ports:

# fcinfo hba-port -l 210000e08b074cb5 210100e08b274cb5

HBA Port WWN: 210000e08b074cb5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c1
       Manufacturer: QLogic Corp.
       Model: 375-3108-xx
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Serial Number: 0402F00-0549112808
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: N-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200000e08b074cb5
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
HBA Port WWN: 210100e08b274cb5
       Port Mode: Initiator
       OS Device Name: /dev/cfg/c2
       Manufacturer: QLogic Corp.
       Model: 375-3108-xx
       Firmware Version: 3.3.116
       FCode/BIOS Version: 1.13.08
       Serial Number: 0402F00-0549112808
       Driver Name: qlc
       Driver Version: 20070212-2.19
       Type: N-port
       State: online
       Supported Speeds: 1Gb 2Gb
       Current Speed: 2Gb
       Node WWN: 200100e08b274cb5
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0

Example 4 Listing All Remote Ports

The following command lists all remote ports that are visible through the given HBA port:

# fcinfo remote-port -p 210100e08b274cb5

Remote Port WWN: 50020f230000b4af
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 50020f200000b4af
Remote Port WWN: 210000e08b07daa6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200000e08b07daa6
Remote Port WWN: 20030003ba27c788
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 10000003ba27c788
Remote Port WWN: 210000e08b096a60
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200000e08b096a60

Example 5 Listing Remote Ports and Link Statistics

The following command lists information for the remote ports and the link statistics for those ports:

# fcinfo remote-port -l -p 210100e08b272ab5

Remote Port WWN: 210100e08b296a60
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296a60
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 20030003ba27d56d
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 10000003ba27d56d
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 4765165
               Loss of Signal Count: 4765165
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210100e08b27f7a6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27f7a6
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 50020f230000b897
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 50020f200000b897
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 7
               Loss of Signal Count: 7
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210100e08b27daa6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27daa6
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210000e08b074cb5
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200000e08b074cb5
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210100e08b296060
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296060
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0

Example 6 Listing All SCSI Targets and Link Statistics

The following command lists all remote ports as well as the link statistics and scsi-target information:

# fcinfo remote-port  -sl -p 210100e08b272ab5

Remote Port WWN: 210100e08b296a60
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296a60
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 20030003ba27d56d
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 10000003ba27d56d
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 4765165
               Loss of Signal Count: 4765165
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
       LUN: 0
         Vendor: SUN
         Product: T4
         OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd0s2
       LUN: 1
         Vendor: SUN
         Product: T4
         OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd1s2
Remote Port WWN: 210100e08b27f7a6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27f7a6
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 50020f230000b897
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 50020f200000b897
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 7
               Loss of Signal Count: 7
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
       LUN: 0
         Vendor: SUN
         Product: T300
         OS Device Name: Unknown
       LUN: 1
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d1s2
       LUN: 2
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d2s2
       LUN: 3
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d3s2
       LUN: 4
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d4s2
       LUN: 5
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d5s2
       LUN: 6
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d6s2
       LUN: 7
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d7s2
       LUN: 8
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d8s2
       LUN: 9
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d9s2
       LUN: 10
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d10s2
       LUN: 11
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d11s2
       LUN: 12
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d12s2
       LUN: 13
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d13s2
       LUN: 14
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d14s2
       LUN: 15
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d15s2
Remote Port WWN: 210100e08b27daa6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27daa6
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210000e08b074cb5
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200000e08b074cb5
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0
Remote Port WWN: 210100e08b296060
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296060
       Link Error Statistics:
               Link Failure Count: 0
               Loss of Sync Count: 0
               Loss of Signal Count: 0
               Primitive Seq Protocol Error Count: 0
               Invalid Tx Word Count: 0
               Invalid CRC Count: 0

Example 7 Listing SCSI Target Information

The following command lists all remote ports as well as the scsi-target information:

# fcinfo remote-port  -s -p 210100e08b272ab5

Remote Port WWN: 210100e08b296a60
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296060
Remote Port WWN: 20030003ba27d56d
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 10000003ba27d56d
       LUN: 0
         Vendor: SUN
         Product: T4
         OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd0s2
       LUN: 1
         Vendor: SUN
         Product: T4
         OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd1s2
Remote Port WWN: 210100e08b27f7a6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27f7a6
Remote Port WWN: 50020f230000b897
       Active FC4 Types: SCSI
       SCSI Target: yes
       Port Symbolic Name: unknown
       Node WWN: 50020f200000b897
       LUN: 0
         Vendor: SUN
         Product: T300
         OS Device Name: Unknown
       LUN: 1
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d1s2
       LUN: 2
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d2s2
       LUN: 3
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d3s2
       LUN: 4
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d4s2
       LUN: 5
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d5s2
       LUN: 6
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d6s2
       LUN: 7
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d7s2
       LUN: 8
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d8s2
       LUN: 9
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d9s2
       LUN: 10
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d10s2
       LUN: 11
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d11s2
       LUN: 12
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d12s2
       LUN: 13
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d13s2
       LUN: 14
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d14s2
       LUN: 15
         Vendor: SUN
         Product: T300
         OS Device Name: /dev/rdsk/c4t50020F230000B897d15s2
Remote Port WWN: 210100e08b27daa6
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b27daa6
Remote Port WWN: 210000e08b074cb5
       Active FC4 Types: SCSI,IP
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200000e08b074cb5
Remote Port WWN: 210100e08b296060
       Active FC4 Types: SCSI
       SCSI Target: no
       Port Symbolic Name: unknown
       Node WWN: 200100e08b296060

Example 8 Listing the Logical Unit

The following command lists the logical unit:

# fcinfo logical-unit

/dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2
/dev/rdsk/c0t600C0FF00000000000362272539E5B03d0s2
/dev/rmt/0n             

Example 9 Displaying Additional Information for the Logical Unit

The following command displays additional information about the logical unit using the -v option for device /dev/rmt/On:

# fcinfo lu -v /dev/rmt/On

OS Device Name: /dev/rmt/0n
       HBA Port WWN: 210000e07c030b91
              Remote Port WWN: 21010003b7830a6
                      LUN: 0
       Vendor: STK
       Product: 9940A
       Device Type: Tape device

The following command displays additional information about the logical unit using the -v option for device /dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2

# fcinfo logical-unit -v \
    /dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2

OS Device Name: /dev/rdsk/c0t600C0FF0000000000036223AE73EB705d0s2
       HBA Port WWN: 210100e08b27a8a1
               Remote Port WWN: 256000c0ffc03622
                       LUN: 0
               Remote Port WWN: 216000c0ff803622
                       LUN: 0
       HBA Port WWN: 210000e08b07a8a1
               Remote Port WWN: 256000c0ffc03622
                       LUN: 0
               Remote Port WWN: 216000c0ff803622
                       LUN: 0
       Vendor: SUN
       Product: StorEdge 3510
       Device Type: Disk device

Example 10 Adding an NIPV Port

The following command adds an NPIV port to the HBA with a port name:

210000e08b170f1c

The NPIV port has a port name of 2000000000000001 and a node name of 2100000000000001.

# fcadm create-npiv-port  -p 2000000000000001 -n 2100000000000001 \
210000e08b170f1c

Created NPIV Port:
   HBA Port WWN: 2000000000000001
   Node WWN: 2100000000000001
   Physical HBA Port WWN: 210000e08b170f1c

Example 11 Adding an NIPV Port with Random WWN

The following command adds an NPIV port to the HBA with a randomly assigned port name of 210000e08b170f1c.

# fcadm create-npiv-port 210000e08b170f1c

Created NPIV Port:
   HBA Port WWN: 2038295824942801
   Node WWN: 2100392849248001
   Physical HBA Port WWN: 210000e08b170f1c

Example 12 Deleting an NIPV Port

The following command deletes an NPIV port.

# fcadm delete-npiv-port -p 2000000000000001 -w 2100000000000001 \
210000e08b170f1c

ATTRIBUTES

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE Availability SUNW Interface Stability

SEE ALSO

attributes(5)  

ERROR MESSAGES

Errors that can occur in addition to the errors normally associated with system administration commands:

o HBA_port_WWN: not found

o Remote_port_WWN: not found

o HBA_port_WWN: NPIV not supported on this HBA

Index

NAME

SYNOPSIS

DESCRIPTION

SUBCOMMANDS

OPTIONS

EXAMPLES

ATTRIBUTES

SEE ALSO

ERROR MESSAGES

Партнёры:

Хостинг: