rem_drv - remove a device driver from the system
rem_drv [-b basedir] device_driver
The rem_drv command informs the system that the device driver device_driver is no longer valid. If possible, rem_drv unloads device_driver from memory. rem_drv also updates the system driver configuration files.
If rem_drv has been executed, the next time the system is rebooted it automatically performs a reconfiguration boot (see kernel(1M)).
The following options are supported:
-b basedir
Note -
-C
Example 1 Removing the sd Driver
The following example removes the sd driver from use:
example% rem_drv sd
Example 2 Removing a Diskless Client
The following example removes the driver from the sun1 diskless client. The driver is not uninstalled or unloaded until the client machine is rebooted.
example% rem_drv -b /export/root/sun1 sd
Note the caveat on the use of the -b option in the description of that option, above.
See attributes(5) for descriptions of the following attributes:
|
add_drv(1M), kernel(1M), update_drv(1M), attributes(5), zones(5), devfs(7FS)
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |