NAME zshall - the Z shell meta-man page SYNOPSIS DESCRIPTION Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell script command pro- cessor. Of the standard shells, zsh most closely resembles ksh but includes many enhancements. Zsh has comand line editing, builtin spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and a host of other features. This manual page includes all the separate manual pages in the following order: zshmisc (general information), zshexpn (command and parameter expansion), zshbuiltins (built-in functions), zshcompctl (completion control via the compctl built-in), zshparam (shell parameters), zshzle (command line editing) and zshoptions (shell options). NAME zshmisc - Everything and then some SYNOPSIS Everything I haven't put somewhere else SHELL GRAMMAR A simple command is a sequence of optional parameter assign- ments followed by blank-separated words, with optional redirections interspersed. The first word is the command to be executed, and the remaining words, if any, are arguments to the command. If a command name is given, the parameter assignments modify the environment of the command when it is executed. The value of a simple command is its exit status, or 128 plus the signal number if terminated by a signal. A pipeline is a sequence of one or more commands separated by | or |&. |& is shorthand for 2>&1 |. The standard out- put of each command is connected to the standard input of the next command in the pipeline. If a pipeline is preceded by coproc, it is executed as a coprocess; a two-way pipe is established between it and the parent shell. The shell can read from or write to the coprocess by means of the >&p and <&p redirection operators. The value of a pipeline is the value of the last command. If a pipeline is preceded by a !, the value of that pipeline is the logical NOT of the value of the last command. A sublist is a sequence of one or more pipelines separated by && or ||. If two pipelines are separated by &&, the second pipeline is executed only if the first is successful (returns a zero value). If two pipelines are separated by ||, the second is executed only if the first is unsuccessful (returns a nonzero value). Both operators have equal pre- cedence and are left associative. A list is a sequence of zero or more sublists separated by, and optionally terminated by, ;, &, &|, &! or a newline. Normally the shell waits for each list to finish before exe- cuting the next one. If a list is terminated by &, &| or &!, the shell executes it in the background, and does not wait for it to finish. PRECOMMAND MODIFIERS A simple command may be preceded by a precommand modifier which will alter how the command is interpreted. These modifiers are shell builtin commands with the exception of nocorrect which is a reserved word. - The command is executed with a - prepended to its argv[0] string. noglob Filename generation (globbing) is not performed on any of the words. nocorrect Spelling correction is not done on any of the words. exec The command is executed in the parent shell without forking. command The command word is taken to be the name of an external command, rather than a shell function or builtin. COMPLEX COMMANDS A complex command in zsh is one of the following: if list then list [ elif list then list ] ... [ else list ] fi The if list is executed, and, if it returns a zero exit status, the then list is executed. Otherwise, the elif list is executed and, if its value is zero, the then list is executed. If each elif list returns nonzero, the else list is executed. for name [ in word ... term ] do list done where term is one ore more newline or ;. Expand the list of words, and set the parameter name to each of them in turn, executing list each time. If the in word is omitted, use the positional parameters instead of the words. while list do list done Execute the do list as long as the while list returns a zero exit status. until list do list done Execute the do list as long as until list returns a nonzero exit status. repeat word do list done word is expanded and treated as an arithmetic expres- sion, which must evaluate to a number n. list is then executed n times. case word in [ [(] pattern [ | pattern ] ... ) list ;; ] ... esac Execute the list associated with the first pattern that matches word, if any. The form of the patterns is the same as that used for filename generation. See Filename Generation below. select name [ in word ... term ] do list done where term is one ore more newline or ;. Print the set of words, each preceded by a number. If the in word is omitted, use the positional parameters. The PROMPT3 prompt is printed and a line is read from standard input. If this line consists of the number of one of the listed words, then the parameter name is set to the word corresponding to this number. If this line is empty, the selection list is printed again. Otherwise, the value of the parameter name is set to null. The contents of the line read from standard input is saved in the parameter REPLY. list is executed for each selection until a break or end-of-file is encountered. ( list ) Execute list in a subshell. Traps set by the trap builtin are reset to their default values while execut- ing list. { list } Execute list. function word ... [ () ] [ term ] { list } word ... () [ term ] { list } word ... () [ term ] command where term is one or more newline or ;. Define a func- tion which is referenced by any one of word. Normally, only one word is provided; multiple words are usually only useful for setting traps. The body of the func- tion is the list between the { and }. See FUNCTIONS below. If the option SH_GLOB is set for compatibility with other shells, then whitespace may appear between between the left and right parentheses when there is a single word; otherwise, the parentheses will be treated as forming a globbing pattern in that case. time [ pipeline ] The pipeline is executed, and timing statistics are reported on the standard error in the form specified by the TIMEFMT parameter. If pipeline is omitted, print statistics about the shell process and its children. [[ exp ]] Evaluates the conditional expression exp and return a zero exit status if it is true. See Conditional Expressions below for a description of exp. ALTERNATE FORMS FOR COMPLEX COMMANDS Many of zsh's complex commands have alternate forms. These particular versions of complex commands should be considered deprecated and may be removed in the future. The versions in the previous section should be preferred instead. The short versions below only work if sublist is of the form { list } or if the NO_SHORT_LOOPS option is not set. if list { list } [ elif list { list } ] ... [ else { list } ] An alternate form of if. if list sublist A short form of previous one. for name ( word ... ) sublist A short form of for. for name [ in word ... term ] sublist where term is one ore more newline or ;. Another short form of for. foreach name ( word ... ) list end Another form of for. while list { list } An alternative form of while. until list { list } An alternative form of until. repeat word sublist This is a short form of repeat. case word { [ [(] pattern [ | pattern ] ... ) list ;; ] ... } An alternative form of case. select name [ in word term ] sublist where term is one ore more newline or ;. A short form of select. RESERVED WORDS The following words are recognized as reserved words when used as the first word of a command unless quoted or dis- abled using disable -r: do done esac then elif else fi for case if while func- tion repeat time until select coproc nocorrect foreach end ! [[ { } Additionally } is recognized in any position if the IGNORE_BRACES option is not set. COMMENTS In noninteractive shells, or in interactive shells with the INTERACTIVE_COMMENTS option set, a word beginning with the third character of the histchars parameter (`#' by default) causes that word and all the following characters up to a newline to be ignored. ALIASING Every token in the shell input is checked to see if there is an alias defined for it. If so, it is replaced by the text of the alias if it is in command position (if it could be the first word of a simple command), or if the alias is glo- bal. If the text ends with a space, the next word in the shell input is treated as though it were in command position for purposes of alias expansion. An alias is defined using the alias builtin; global aliases may be defined using the -g option to that builtin. Alias substitution is done on the shell input before any other substitution except history substitution. Therefore, if an alias is defined for the word foo, alias substitution may be avoided by quoting part of the word, e.g. \foo. But there is nothing to prevent an alias being defined for \foo as well. QUOTING A character may be quoted (that is, made to stand for itself) by preceding it with a \. \ followed by a newline is ignored. All characters enclosed between a pair of sin- gle quotes ('') are quoted. A single quote cannot appear within single quotes. Inside double quotes (""), parameter and command substitution occurs, and \ quotes the characters \, `, ", and $. REDIRECTION Before a command is executed, its input and output may be redirected. The following may appear anywhere in a simple command or may precede or follow a complex command. Substi- tution occurs before word or digit is used except as noted below. If the result of substitution on word produces more than one filename, redirection occurs for each separate filename in turn. <word Open file word as standard input. <>word Open file word for reading and writing as standard input. If the file does not exist then it is created. >word Open file word as standard output. If the file does not exist then it is created. If the file exists, and the CLOBBER option is unset, this causes an error; oth- erwise, it is truncated to zero length. >| word >! word Same as >, except that the file is truncated to zero length if it exists, even if CLOBBER is unset. >>word Open file word as standard output. If the file exists then output is appended to it. If the file does not exist, and the CLOBBER option is unset, this causes an error; otherwise, the file is created. >>| word >>! word Same as >>, except that the file is created if it does not exist, even if CLOBBER is unset. <<[-] word The shell input is read up to a line that is the same as word, or to an end-of-file. No parameter substitu- tion, command substitution or filename generation is performed on word. The resulting document, called a here-document, becomes the standard input. If any character of word is quoted with single or double quotes or a \, no interpretation is placed upon the characters of the document. Otherwise, parameter and command substitution occurs, \ followed by a newline is removed, and \ must be used to quote the characters \, $, `, and the first character of word. If <<- is used, then all leading tabs are stripped from word and from the document. <<<word Perform shell expansion on word and pass the result to standard input. <&digit The standard input is duplicated from file descriptor digit (see dup(2)). Similarly for standard output using >&digit. >&word Same as >word 2>&1. >>&word Same as >>word 2>&1. <&- Close the standard input. >&- Close the standard output. <&p The input from the coprocess is moved to the standard input. >&p The output to the coprocess is moved to the standard output. If one of the above is preceded by a digit, then the file descriptor referred to is that specified by the digit (instead of the default 0 or 1). The order in which redirections are specified is significant. The shell evalu- ates each redirection in terms of the (file descriptor, file) association at the time of evaluation. For example: ... 1>fname 2>&1 first associates file descriptor 1 with file fname. It then associates file descriptor 2 with the file associated with file descriptor 1 (that is, fname). If the order of redirections were reversed, file descriptor 2 would be asso- ciated with the terminal (assuming file descriptor 1 had been) and then file descriptor 1 would be associated with file fname. If the user tries to open a file descriptor for writing more than once, the shell opens the file descriptor as a pipe to a process that copies its input to all the specified out- puts, similar to tee(1), provided the MULTIOS option is set. Thus: date >foo >bar writes the date to two files, named "foo" and "bar". Note that a pipe is an implicit indirection; thus date >foo | cat writes the date to the file "foo", and also pipes it to cat. If the MULTIOS option is set, the word after a redirection operator is also subjected to filename generation (glob- bing). Thus : > * will truncate all files in the current directory, assuming there's at least one. (Without the MULTIOS option, it would create an empty file called "*".) If the user tries to open a file descriptor for reading more than once, the shell opens the file descriptor as a pipe to a process that copies all the specified inputs to its output in the order specified, similar to cat(1), provided the MUL- TIOS option is set. Thus sort <foo <fubar or even sort <f{oo,ubar} is equivalent to "cat foo fubar | sort". Similarly, you can do echo exit 0 >> *.sh Note that a pipe is in implicit indirection; thus cat bar | sort <foo is equivalent to "cat bar foo | sort" (note the order of the inputs). If the MULTIOS option is unset, each redirection replaces the previous redirection for that file descriptor. However, all files redirected to are actually opened, so echo foo > bar > baz when MULTIOS is unset will truncate bar, and write "foo" into baz. If a simple command consists of one or more redirection operators and zero or more parameter assignments, but no command name, the command cat is assumed. Thus < file copies the contents of file to the standard output. If a command is followed by & and job control is not active, then the default standard input for the command is the empty file /dev/null. Otherwise, the environment for the execu- tion of a command contains the file descriptors of the invoking shell as modified by input/output specifications. COMMAND EXECUTION If a command name contains no slashes, the shell attempts to locate it. If there exists a shell function by that name, the function is invoked as described below in FUNCTIONS. If there exists a shell builtin by that name, the builtin is invoked. Otherwise, the shell searches each element of path for a directory containing an executable file by that name. If the search is unsuccessful, the shell prints an error mes- sage and returns a nonzero exit status. If execution fails because the file is not in executable format, and the file is not a directory, it is assumed to be a shell script. /bin/sh is spawned to execute it. If the program is a file beginning with #!, the remainder of the first line specifies an interpreter for the program. The shell will execute the specified interpreter on operating systems that do not handle this executable format in the kernel. FUNCTIONS Shell functions are defined with the function reserved word or the special syntax "funcname()". The function reserved word is used to define shell functions. Shell functions are read in and stored internally. Alias names are resolved when the function is read. Functions are executed like com- mands with the arguments passed as positional parameters. (See Execution below). Functions execute in the same process as the caller and share all files and present working directory with the caller. A trap on EXIT set inside a function is executed after the function completes in the environment of the caller. The return builtin is used to return from function calls. Function identifiers can be listed with the functions buil- tin. Functions can be undefined with the unfunction buil- tin. The following functions, if defined, have special meaning to the shell: chpwd Executed whenever the current working directory is changed. precmd Executed before each prompt. preexec Executed just after a command has been read and is about to be executed. If the history mechanism is active, the string to be executed is passed as an argu- ment. periodic If the parameter PERIOD is set, this function is exe- cuted every PERIOD seconds, just before a prompt. TRAPxxx If defined and non-null, this function will be executed whenever the shell catches a signal SIGxxx, where xxx is a signal name as specified for the kill builtin (see below). The signal number will be passed as the first parameter to the function. In addition, TRAPZERR is executed whenever a command has a non-zero exit status, TRAPDEBUG is executed after each command, and TRAPEXIT is executed when the shell exits, or when the current function exits if defined inside a function. If a function of this form is defined and null, the shell and processes spawned by it will ignore SIGxxx. JOBS If the MONITOR option is set, an interactive shell associ- ates a job with each pipeline. It keeps a table of current jobs, printed by the jobs command, and assigns them small integer numbers. When a job is started asynchronously with &, the shell prints a line which looks like: [1] 1234 indicating that the job which was started asynchronously was job number 1 and had one (top-level) process, whose process id was 1234. If a job is started with &| or &!, then that job is immedi- ately disowned. After startup, it does not have a place in the job table, and is not subject to the job control features described here. If you are running a job and wish to do something else you may hit the key ^Z (control-Z) which sends a TSTP signal to the current job. The shell will then normally indicate that the job has been `suspended', and print another prompt. You can then manipulate the state of this job, putting it in the background with the bg command, or run some other commands and then eventually bring the job back into the foreground with the foreground command fg. A ^Z takes effect immedi- ately and is like an interrupt in that pending output and unread input are discarded when it is typed. A job being run in the background will suspend if it tries to read from the terminal. Background jobs are normally allowed to produce output, but this can be disabled by giv- ing the command ``stty tostop''. If you set this tty option, then background jobs will suspend when they try to produce output like they do when they try to read input. There are several ways to refer to jobs in the shell. A job can be referred to by the process id of any process of the job or by one of the following: %number The job with the given number. %string Any job whose command line begins with string. %?string Any job whose command line contains string. %% Current job. %+ Equivalent to %%. %- Previous job. The shell learns immediately whenever a process changes state. It normally informs you whenever a job becomes blocked so that no further progress is possible. If notify is not set, it waits until just before it prints a prompt before it informs you. When the monitor mode is on, each background job that com- pletes triggers any trap set for CHLD. When you try to leave the shell while jobs are running or suspended, you will be warned that `You have suspended (run- ning) jobs.' You may use the jobs command to see what they are. If you do this or immediately try to exit again, the shell will not warn you a second time; the suspended jobs will be terminated, and the running jobs will be sent a SIGHUP signal. To avoid having the shell terminate the run- ning jobs, either use the nohup(1) command or the disown builtin (see below). SIGNALS The INT and QUIT signals for an invoked command are ignored if the command is followed by & and the job MONITOR option is not active. Otherwise, signals have the values inherited by the shell from its parent (but see the TRAPxxx special function above). ARITHMETIC EVALUATION An ability to perform integer arithmetic is provided with the builtin let. Evaluations are performed using long arithmetic. A leading 0x or 0X denotes hexadecimal. Other- wise, numbers are of the form [base#]n where base is a decimal number between two and thirty-six representing the arithmetic base and n is a number in that base (for example, `16#ff' is 255 in hexadecimal). If base is omitted then base 10 is used. For backwards compatibility the form `[16]ff' is also accepted. An arithmetic expression uses nearly the same syntax, pre- cedence, and associativity of expressions in C. The follow- ing operators are supported (listed in decreasing order of precedence): + - ! ~ ++ -- unary plus/minus, logical NOT, complement, {pre,post}{in,de}crement << >> bitwise shift left, right & bitwise AND ^ bitwise XOR | bitwise OR ** exponentiation * / % multiplication, division, modulus (remainder) + - addition, subtraction < > <= >= comparison == != equality and inequality && logical AND || ^^ logical OR, XOR ? : ternary operator = += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **= assignment , comma operator The operators &&, ||, &&=, and ||= are short-circuiting, and only one of the latter two expressions in a ternary operator is evaluated. Note the precedence of the bitwise AND, OR, and XOR operators. An expression of the form #\x where x is any character gives the ascii value of this character and an expression of the form #foo gives the ascii value of the first character of the value of the parameter foo. Named parameters and subscripted arrays can be referenced by name within an arithmetic expression without using the parameter substitution syntax. An internal integer representation of a named parameter can be specified with the integer builtin. Arithmetic evalua- tion is performed on the value of each assignment to a named parameter declared integer in this manner. Since many of the arithmetic operators require quoting, an alternative form of the let command is provided. For any command which begins with a ((, all the characters until a matching )) are treated as a quoted expression. More pre- cisely, ((...)) is equivalent to let "...". CONDITIONAL EXPRESSIONS A conditional expression is used with the [[ compound com- mand to test attributes of files and to compare strings. Each expression can be constructed from one or more of the following unary or binary expressions: -a file true if file exists. -b file true if file exists and is a block special file. -c file true if file exists and is a character special file. -d file true if file exists and is a directory. -e file true if file exists. -f file true if file exists and is an ordinary file. -g file true if file exists and has its setgid bit set. -h file true if file exists and is a symbolic link. -k file true if file exists and has its sticky bit set. -n string true if length of string is non-zero. -o option true if option named option is on. option may be a single character, in which case it is a single letter option name. (See the SPECIFYING OPTIONS section of the zshoptions(1) man page.) -p file true if file exists and is a fifo special file or a pipe. -r file true if file exists and is readable by current process. -s file true if file exists and has size greater than zero. -t fd true if file descriptor number fd is open and associ- ated with a terminal device. (note: fd is not optional) -u file true if file exists and has its setuid bit set. -w file true if file exists and is writable by current process. -x file true if file exists and is executable by current pro- cess. If file exists and is a directory, then the current process has permission to search in the direc- tory. -z string true if length of string is zero. -L file true if file exists and is a symbolic link. -O file true if file exists and is owned by the effective user id of this process. -G file true if file exists and its group matches the effective group id of this process. -S file true if file exists and is a socket. -N file true if file exists and its access time is not newer than its modification time. file1 -nt file2 true if file1 exists and is newer than file2. file1 -ot file2 true if file1 exists and is older than file2. file1 -ef file2 true if file1 and file2 exist and refer to the same file. string == pattern string = pattern true if string matches pattern. The first form is the preferred one. The other form is for backward compati- bility and should be considered obsolete. string != pattern true if string does not match pattern. string1 < string2 true if string1 comes before string2 based on ASCII value of their characters. string1 > string2 true if string1 comes after string2 based on ASCII value of their characters. exp1 -eq exp2 true if exp1 is equal to exp2. exp1 -ne exp2 true if exp1 is not equal to exp2. exp1 -lt exp2 true if exp1 is less than exp2. exp1 -gt exp2 true if exp1 is greater than exp2. exp1 -le exp2 true if exp1 is less than or equal to exp2. exp1 -ge exp2 true if exp1 is greater than or equal to exp2. ( exp ) true if exp is true. ! exp true if exp is false. exp1 && exp2 true if exp1 and exp2 are both true. exp1 || exp2 true if either exp1 or exp2 is true. In each of the above expressions, if file is of the form /dev/fd/n, where n is an integer, then the test applied to the open file whose descriptor number is n, even if the underlying system does not support the /dev/fd directory. COMPATIBILITY Zsh tries to emulate sh or ksh when it is invoked as sh or ksh respectively. In this mode the following parameters are not special and not initialized by the shell: ARGC, argv, cdpath, fignore, fpath, HISTCHARS, mailpath, MANPATH, manpath, path, prompt, PROMPT, PROMPT2, PROMPT3, PROMPT4, psvar, status, watch. The usual zsh starup/shutdown scripts are not executed. Login shells source /etc/profile followed by $HOME/.profile. If the ENV environment variable is set on invocation, $ENV is sourced after the profile scripts. The value of ENV is subjected to parameter expansion, command substitution, and arithmetic expansion before being interpreted as a pathname. Note that the PRIVILEGED option also affects the execution of startup files. See zshoptions(1) for more details. The following options are set if the shell is invoked as sh or ksh: NO_BAD_PATTERN, NO_BANG_HIST, NO_BG_NICE, NO_EQUALS, NO_FUNCTION_ARGZERO, GLOB_SUBST, NO_HUP, INTERACTIVE_COMMENTS, KSH_ARRAYS, NO_MULTIOS, NO_NOMATCH, RM_STAR_SILENT, POSIX_BUILTINS, SH_FILE_EXPANSION, SH_GLOB, SH_OPTION_LETTERS, SH_WORD_SPLIT. Additionally the BSD_ECHO and the IGNORE_BRACES options are set if zsh is invoked as sh and the KSH_OPTION_PRINT, LOCAL_OPTIONS, PROMPT_SUBST and SINGLE_LINE_ZLE options are set if zsh is invoked as ksh. NOTES Source for zsh is available in the SUNWzshS package. NAME zshexpn - zsh command and parameter expansion DESCRIPTION The types of expansions performed are history expansion, alias expansion, process substitution, parameter expansion, command substitution, arithmetic expansion, brace expansion, filename expansion, and filename generation. Exansion is done in the above specified order in five steps. The first is History expansion which is only performed in interactive shells. The next step is alias expansion which is done right before the command line is parsed. They are followed by process substitution, parameter expansion, com- mand substitution, arithmetic expansion and brace expansion which are preformed in one step in left-to-right fashion. After these expansions, all unquoted occurrences of the characters \, ', and " are removed and the result is sub- jected to filename expansion followed by filename genera- tion. If the SH_FILE_EXPANSION option is set, the order of expan- sion is modified for compatibility with sh and ksh. Filename expansion is performed immediately after alias sub- stitution, preceding the set of five substitutions mentioned above. FILENAME EXPANSION Each word is checked to see if it begins with an unquoted ~. If it does, then the word up to a /, or the end of the word if there is no /, is checked to see if it can be substituted in one of the ways described here. If so, then the ~ and the checked portion are replaced with the appropriate sub- stitute value. A ~ by itself is replaced by the value of the HOME parame- ter. A ~ followed by a + or a - is replaced by the value of PWD or OLDPWD, respectively. A ~ followed by a number is replaced by the directory at that position in the directory stack. ~0 is equivalent to ~+, and ~1 is the top of the stack. ~+ followed by a number is replaced by the directory at that position in the direc- tory stack. ~+0 is equivalent to ~+, and ~+1 is the top of the stack. ~- followed by a number is replaced by the directory that many positions from the bottom of the stack. ~-0 is the bottom of the stack. The PUSHD_MINUS option exchanges the effects of ~+ and ~- where they are followed by a number. A ~ followed by anything not already covered is looked up as a named directory, and replaced by the value of that named directory if found. Named directories are typically home directories for users on the system. They may also be defined if the text after the ~ is the name of a string shell parameter whose value begins with a /. It is also possible to define directory names using the `-d' option to the hash builtin. In certain circumstances (in prompts, for instance), when the shell prints a path, the path is checked to see if it has a named directory as its prefix. If so, then the prefix portion is replaced with a ~ followed by the name of the directory. The shortest way of referring to the directory is used, with ties broken in favour of using a named direc- tory, except when the directory is /. If a word begins with an unquoted = and the EQUALS option is set, the remainder of the word is taken as the name of a command or alias. If a command exists by that name, the word is replaced by the full pathname of the command. If an alias exists by that name, the word is replaced with the text of the alias. Filename expansion is performed on the right hand side of a parameter assignment, including those appearing after com- mands of the typeset family. In this case, the right hand side will be treated as a colon-separated list in the manner of PATH so that a ~ or an = following a : is eligible for expansion. All such behavior can be disabled by quoting the ~, the =, or the whole expression (but not simply the colon); the EQUALS option is also respected. If the option MAGIC_EQUAL_SUBST is set, any unquoted shell argument in the form identifier=expression becomes eligible for file expansion as described in the previous paragraph. Quoting the first = also inhibits this. PROCESS SUBSTITUTION Each command argument of the form <(list) or >(list) or =(list) is subject to process substitution. In the case of the < or > forms, the shell will run process list asynchro- nously connected to a named pipe (FIFO). The name of this pipe will become the argument to the command. If the form with > is selected then writing on this file will provide input for list. If < is used, then the file passed as an argument will be a named pipe connected to the output of the list process. For example, paste <(cut -f1 file1) <(cut -f3 file2) | tee >(pro- cess1) >(process2) >/dev/null cuts fields 1 and 3 from the files file1 and file2 respec- tively, pastes the results together, and sends it to the processes process1 and process2. Note that the file, which is passed as an argument to the command, is a system pipe so programs that expect to lseek(2) on the file will not work. Also note that the previous example can be more compactly and efficiently written as: paste <(cut -f1 file1) <(cut -f3 file2) > >(process1) > >(process2) The shell uses pipes instead of FIFOs to implement the latter two process substitutions in the above example. If = is used, then the file passed as an argument will be the name of a temporary file containing the output of the list process. This may be used instead of the < form for a program that expects to lseek(2) on the input file. PARAMETER EXPANSION The character $ is used to introduce parameter expansions. See PARAMETERS below for a description of parameters. In the expansions discussed below that require a pattern, the form of the pattern is the same as that used for filename generation; see Filename Generation. ${name} The value, if any, of the parameter name is sub- stituted. The braces are required if name is fol- lowed by a letter, digit, or underscore that is not to be interpreted as part of its name. If name is an array parameter, then the values of each element of name is substituted, one element per word. Otherwise, the expansion results in one word only; no field splitting is done on the result unless the SH_WORD_SPLIT option is set. ${+name} If name is the name of a set parameter `1' is sub- stituted, otherwise `0' is substituted. ${name:-word} If name is set and is non-null then substitute its value; otherwise substitute word. If name is miss- ing, substitute word. ${name:=word} If name is unset or is null then set it to word; the value of the parameter is then substituted. ${name::=word} Set name to word; the value of the parameter is then substituted. ${name:?word} If name is set and is non-null, then substitute its value; otherwise, print word and exit from the shell. Interactive shells do not exit. If word is omitted, then a standard message is printed. ${name:+word} If name is set and is non-null then substitute word; otherwise substitute nothing. ${name#pattern} ${name##pattern} If the pattern matches the beginning of the value of name, then substitute the value of name with the matched portion deleted; otherwise, just sub- stitute the value of name. In the first form, the smallest matching pattern is preferred; in the second form, the largest matching pattern is pre- ferred. If name is an array and the substitution is not quoted or the @ flag or the name[@] syntax is used, matching is performed on each array ele- ments separately. ${name%pattern} ${name%%pattern} If the pattern matches the end of the value of name, then substitute the value of name with the matched portion deleted; otherwise, just substi- tute the value of name. In the first form, the smallest matching pattern is preferred; in the second form, the largest matching pattern is pre- ferred. If name is an array and the substitution is not quoted or the @ flag or the name[@] syntax is used, matching is performed on each array ele- ments separately. ${name:#pattern} If the pattern matches the value of name, then substitute the empty string; otherwise, just sub- stitute the value of name. If name is an array and the substitution is not quoted or the @ flag or the name[@] syntax is used, matching is per- formed on each array elements separately, and the matched array elements are removed (use the M flag to remove the non-matched elements). ${#spec} If spec is one of the above substitutions, substi- tute the length in characters of the result instead of the result itself. If spec is an array expression, substitute the number of elements of the result. ${^spec} Turn on the RC_EXPAND_PARAM option for the evalua- tion of spec; if the ^ is doubled, turn it off. When this option is set, array expansions of the form foo${xx}bar, where the parameter xx is set to (a b c), are substituted with fooabar foobbar foocbar instead of the default fooa b cbar. ${=spec} Turn on the SH_WORD_SPLIT option for the evalua- tion of spec; if the = is doubled, turn it off. When this option is set, parameter values are split into separate words using IFS as a delimiter before substitution. This is done by default in most other shells. ${~spec} Turn on the GLOB_SUBST option for the evaluation of spec; if the ~ is doubled, turn it off. When this option is set, any pattern characters result- ing from the substitution become eligible for file expansion and filename generation. If the colon is omitted from one of the above expressions containing a colon, then the shell only checks whether name is set or not, not whether it is null. If a ${...} type parameter expression or a $(...) type com- mand substitution is used in place of name above, it is sub- stituted first and the result is used as it were the value of name. If the opening brace is directly followed by an opening parentheses the string up to the matching closing parentheses will be taken as a list of flags. Where argu- ments are valid, any character, or the matching pairs `(...)', `{...}', `[...]', or `<...>', may be used in place of the colon as delimiters. The following flags are sup- ported: A Create an array parameter with ${...:=...} or ${...::=...}. Assignment is made before sorting or padding. @ In double quotes, array elements are put into separate words. Eg. "${(@)foo}" is equivalent to "${foo[@]}" and "${(@)foo[1,2]}" is the same as "$foo[1]" "$foo[2]". e Perform parameter expansion, command substitution and arithmetic expansion on the result. Such expansions can be nested but too deep recursion may have unpredictable effects. o Sort the resulting words in ascending order. O Sort the resulting words in descending order. i With o or O, sort case-independently. L Convert all letters in the result to lower case. U Convert all letters in the result to upper case. C Capitalize the resulting words. c With ${#name}, count the total number of charac- ters in an array, as if the elements were con- catenated with spaces between them. w With ${#name}, count words in arrays or strings; the s flag may be used to set a word delimiter. W Similar to w with the difference that empty words between repeated delimiters are also counted. p Recognize the same escape sequences as the print builtin in string arguments to subsequent flags. l:expr::string1::string2: Pad the resulting words on the left. Each word will be truncated if required and placed in a field expr characters wide. The space to the left will be filled with string1 (concatenated as often as needed) or spaces if string1 is not given. If both string1 and string2 are given, this string is inserted once directly to the left of each word, before padding. r:expr::string1::string2: As l..., but pad the words on the right and insert string2 on the right. j:string: Join the words of arrays together using string as a separator. Note that this occurs before word splitting by the SH_WORD_SPLIT option. F Join the words of arrays together using newline as a separator. This is a shorthand for pj:\n:. s:string: Force word splitting (see the option SH_WORD_SPLIT) at the separator string. Splitting only occurs in places where an array value is valid, and joining always occurs before splitting. f Split the result of the expansion to lines. This is a shorthand for ps:\n:. (All remaining flags are useful only with the ${...#...} or ${...%...} forms.) S Search substrings as well as beginnings or ends. I:expr: Search the expr'th match (where expr evaluates to a number). M Include the matched portion in the result. R Include the unmatched portion in the result (the Rest). B Include the index of the beginning of the match in the result. E Include the index of the end of the match in the result. N Include the length of the match in the result. COMMAND SUBSTITUTION A command enclosed in parentheses preceded by a dollar sign, like so: $(...) or quoted with grave accents: `...` is replaced with its standard output, with any trailing new- lines deleted. If the substitution is not enclosed in dou- ble quotes, the output is broken into words using the IFS parameter. The substitution $(cat foo) may be replaced by the equivalent but faster $(<foo). In either case, if the option GLOB_SUBST is set the output is eligible for filename generation. ARITHMETIC EXPANSION A string of the form $[exp] or $((exp)) is substituted with the value of the arithmetic expression exp. exp is subjected to parameter expansion, command substitution and arithmetic expansion before it is evaluated. See ARITHMETIC EVALUATION in zshmisc(1). BRACE EXPANSION A string of the form foo{xx,yy,zz}bar is expanded to the individual words fooxxbar, fooyybar, and foozzbar. Left- to-right order is preserved. This construct may be nested. Commas may be quoted in order to include them literally in a word. An expression of the form {n1..n2}, where n1 and n2 are integers, is expanded to every number between n1 and n2, inclusive. If either number begins with a zero, all the resulting numbers will be padded with leading zeroes to that minimum width. If the numbers are in decreasing order the resulting sequence will also be in decreasing order. If a brace expression matches none of the above forms, it is left unchanged, unless the BRACE_CCL option is set. In that case, it is expanded to a sorted list of the individual characters between the braces, in the manner of a search set. `-' is treated specially as in a search set, but `^' or `!' as the first character is treated normally. FILENAME GENERATION (GLOBBING) If a word contains an unquoted instance of one of the char- acters *, |, <, [, or ?, it is regarded as a pattern for filename generation, unless the GLOB option is unset. If the EXTENDED_GLOB option is set, the ^, ~ and # characters also denote a pattern; otherwise (except for an initial ~, see Filename Expansion above) they are not treated specially by the shell. The word is replaced with a list of sorted filenames that match the pattern. If no matching pattern is found, the shell gives an error message, unless the NULL_GLOB option is set, in which case the word is deleted; or unless the NOMATCH option is unset, in which case the word is left unchanged. In filename generation, the charac- ter / must be matched explicitly; also, a . must be matched explicitly at the beginning of a pattern or after a /, unless the GLOB_DOTS option is set. No filename generation pattern matches the files "." or "..". In other instances of pattern matching, the / and . are not treated specially. * matches any string, including the null string. ? matches any character. [...] matches any of the enclosed characters. Ranges of characters can be specified by separating two characters by a -. A - or ] may be matched by including it as the first character in the list. [^...] [!...] like [...], except that it matches any character which is not in the given set. <x-y> matches any number in the range x to y, inclusive. If x is omitted, the number must be less than or equal to y. If y is omitted, the number must be greater than or equal to x. A pattern of the form <-> matches any number. ^x matches anything except the pattern x. x|y matches either x or y. x# matches zero or more occurrences of the pattern x. x## matches one or more occurrences of the pattern x. Parentheses may be used for grouping. Note that the | char- acter must be within parentheses, so that the lexical analyzer does not think it is a pipe character. Also note that "/" has a higher precedence than "^"; that is: ls ^foo/bar will search directories in "." except "./foo" for a file named bar. A pathname component of the form (foo/)# matches a path con- sisting of zero or more directories matching the pattern foo. As a shorthand, **/ is equivalent to (*/)#. Thus: ls (*/)#bar or ls **/bar does a recursive directory search for files named bar, not following symbolic links. To follow symbolic links, use the form ***/. If used for filename generation, a pattern may contain an exclusion specifier. Such patterns are of the form pat1~pat2. This pattern will generate all files matching pat1, but which do not match pat2. For example, *.c~lex.c will match all files ending in .c, except the file lex.c. This may appear inside parentheses. Note that "~" has a higher precedence than "|", so that pat1|pat2~pat3 matches any time that pat1 matches, or if pat2 matches while pat3 does not. Note also that "/" characters are not treated specially in the exclusion specifier so that a "*" will match multiple path segments if they appear in the pattern to the left of the "~". Patterns used for filename generation may also end in a list of qualifiers enclosed in parentheses. The qualifiers specify which filenames that otherwise match the given pat- tern will be inserted in the argument list. A qualifier may be any one of the following: / directories . plain files @ symbolic links = sockets p named pipes (FIFOs) * executable plain files (0100) % device files (character or block special) %b block special files %c character special files r owner-readable files (0400) w owner-writable files (0200) x owner-executable files (0100) A group-readable files (0040) I group-writable files (0020) E group-executable files (0010) R world-readable files (0004) W world-writable files (0002) X world-executable files (0001) s setuid files (04000) S setgid files (02000) t files with the sticky bit (01000) ddev files on the device dev l[-|+]ct files having a link count less than ct (-), greater than ct (+), or is equal to ct U files owned by the effective user id G files owned by the effective group id uid files owned by user id id if it is a number, if not, than the character after the u will be used as a separator and the string between it and the next matching separator (`(', `[', `{', and `<' match `)', `]', `}', and `>' respectively, any other character matches itself) will be taken as a user name and the user id of this user will be taken (e.g. u:foo: or u[foo] for user foo) gid like uid but with group ids or names a[Mwhms][-|+]n files accessed exactly n days ago. Files accessed within the last n days are selected using a nega- tive value for n (-n). Files accessed more than n days ago are selected by a positive n value (+n). Optional unit specifiers M, w, h, m, or s (e.g. ah5) cause the check to be performed with months (of 30 days), weeks, hours, minutes, or seconds instead of days, respectively. For instance, echo *(ah-5) would echo files accessed within the last five hours. m[Mwhms][-|+]n like the file access qualifier, except that it uses the file modification time. c[Mwhms][-|+]n like the file access qualifier, except that it uses the file inode change time. L[+|-]n files less than n bytes (-), more than n bytes (+), or exactly n bytes in length. If this flag is directly followed by a k (K), m (M), or p (P) (e.g. Lk+50) the check is performed with kilo- bytes, megabytes, or blocks (of 512 bytes) instead. ^ negates all qualifiers following it - toggles between making the qualifiers work on sym- bolic links (the default) and the files they point to M sets the MARK_DIRS option for the current pattern T appends a traling qualifier mark to the file names, analogous to the LIST_TYPES option, for the current pattern (overrides M) N sets the NULL_GLOB option for the current pattern D sets the GLOB_DOTS option for the current pattern More than one of these lists can be combined, separated by commas. The whole list matches if at least one of the sub- lists matches (they are `or'ed', the qualifiers in the sub- lists are `and'ed'). If a : appears in a qualifier list, the remainder of the expression in parenthesis is interpreted as a modifier (see the subsection Modifiers of the section HISTORY EXPANSION). Note that each modifier must be introduced by a separate :. Note also that the result after modification does not have to be an existing file. The name of any existing file can be followed by a modifier of the form (:..) even if no filename generation is performed. Thus: ls *(-/) lists all directories and symbolic links that point to directories, and ls *(%W) lists all world-writable device files in the current direc- tory, and ls *(W,X) lists all files in the current directory that are world- writable or world-executable, and echo /tmp/foo*(u0^@:t) outputs the basename of all root-owned files beginning with the string "foo" in /tmp, ignoring symlinks, and ls *.*~(lex|parse).[ch](^D^l1) lists all files having a link count of one whose names con- tain a dot (but not those starting with a dot, since GLOB_DOTS is explicitly switched off) except for lex.c, lex.h, parse.c, and parse.h. HISTORY EXPANSION History substitution allows you to use words from previous command lines in the command line you are typing. This sim- plifies spelling corrections and the repetition of compli- cated commands or arguments. Command lines are saved in the history list, the size of which is controlled by the HIST- SIZE variable. The most recent command is retained in any case. A history substitution begins with the fist character of the histchars parameter which is ! by default and may occur anywhere on the command line; history substitutions do not nest. The ! can be escaped with \ or can be enclosed between a pair of single quotes ('') to suppress its special meaning. Double quotes will not work for this. Input lines containing history substitutions are echoed on the terminal after being expanded, but before any other sub- stitutions take place or the command gets executed. Event Designators An event designator is a reference to a command-line entry in the history list. ! Start a history substitution, except when followed by a blank, newline, =, or (. !! Refer to the previous command. By itself, this substitution repeats the previous command. !n Refer to command-line n. !-n Refer to the current command-line minus n. !str Refer to the most recent command starting with str. !?str[?] Refer to the most recent command containing str. !# Refer to the current command line typed in so far. The line is treated as if it were complete up to and including the word before the one with the !# reference. !{...} Insulate a history reference from adjacent charac- ters (if necessary). Word Designators A word designator indicates which word or words of a given command line will be included in a history reference. A `:' separates the event specification from the word designator. It can be omitted if the word designator begins with a ^, $, *, - or %. Word designators include: 0 The first input word (command). n The n'th argument. ^ The first argument, that is, 1. $ The last argument. % The word matched by (the most recent) ?str search. x-y A range of words; -y abbreviates 0-y. * All the arguments, or a null value if there is just one word in the event. x* Abbreviates x-$. x- Like x* but omitting word $. Note that a `%' word designator will only work when used as !%, !:%, !?str?:% and only when used after a !? substitu- tion. Anything else will result in an error, although the error may not be the most obvious one. Modifiers After the optional word designator, you can add a sequence of one or more of the following modifiers, each preceded by a :. These modifiers also work on the result of filename and parameter expansion. h Remove a trailing pathname component, leaving the head. r Remove a trailing suffix of the form `.xxx', leav- ing the basename. e Remove all but the suffix. t Remove all leading pathname components, leaving the tail. & Repeat the previous substitution. g Apply the change to the first occurrence of a match in each word, by prefixing the above (for example, g&). p Print the new command but do not execute it. q Quote the substituted words, escaping further sub- stitutions. x Like q, but break into words at each blank. l Convert the words to all lowercase. u Convert the words to all uppercase. f Repeats the immediately (without a colon) follow- ing modifier until the resulting word doesn't change any more. This and the following F, w and W modifier only work with parameter and filename expansion. F:expr: Like f, but repeats only n times if the expression expr evaluates to n. Any character can be used instead of the `:', if any of `(', `[', or `{' is used as the opening delimiter the second one has to be ')', `]', or `}' respectively. w Makes the immediately following modifier work on each word in the string. W:sep: Like w but words are considered to be the parts of the string that are separated by sep. Any charac- ter can be used instead of the `:', opening parentheses are handled specially, see above. s/l/r[/] Substitute r for l. Unless preceded by a g, the substitution is done only for the first string that matches l. The left-hand side of substitutions are not regular expres- sions, but character strings. Any character can be used as the delimiter in place of /. A backslash quotes the delim- iter character. The character &, in the right hand side, is replaced by the text from the left-hand-side. The & can be quoted with a backslash. A null l uses the previous string either from a l or from a contextual scan string s from !?s. You can omit the rightmost delimiter if a newline immedi- ately follows r; the rightmost ? in a context scan can simi- larly be omitted. By default, a history reference with no event specification refers to the same line as the last history reference on that command line, unless it is the first history reference in a command. In that case, a history reference with no event specification always refers to the previous command. However, if the option CSH_JUNKIE_HISTORY is set, then his- tory reference with no event specification will always refer to the previous command. For example, !!:1 will always refer to the first word of the previous command and !!$ will always refer to the last word of the previous command. And with CSH_JUNKIE_HISTORY set, then !:1 and !$ will function in the same manner as !!:1 and !!$, respectively. However, if CSH_JUNKIE_HISTORY is unset, then !:1 and !$ will refer to the first and last words respectively, of the last com- mand referenced on the current command line. However, if they are the first history reference on the command line, then they refer to the previous command. The character sequence ^foo^bar repeats the last command, replacing the string "foo" with the string "bar". If the shell encounters the character sequence !" in the input, the history mechanism is temporarily disabled until the current list is fully parsed. The !" is removed from the input, and any subsequent ! characters have no special significance. A less convenient but more comprehensible form of command history support is provided by the fc builtin (see the entry in zshbuiltins(1)). NOTES Source for zsh is available in the SUNWzshS package. NAME zshbuiltins - zsh built-in functions DESCRIPTIONS - simple command See the secion PRECOMMAND MODIFIERS in zshmisc(1). . file [ arg ... ] Read commands from file and execute them in the current shell environment. If file does not contain a slash, or if PATH_DIRS is set, the shell looks in the com- ponents of path to find the directory containing file. Files in the current directory are not read unless "." appears somewhere in path. If any arguments arg are given, they become the positional parameters; the old positional parameters are restored when the file is done executing. The exit status is the exit status of the last command executed. : [ arg ... ] This command only expands parameters. A zero exit code is returned. alias [ -gmrL ] [ name[=value] ] ... For each name with a corresponding value, define an alias with that value. A trailing space in value causes the next word to be checked for alias substitu- tion. If the -g flag is present, define a global alias; global aliases are expanded even if they do not occur in command position. For each name with no value, print the value of name, if any. With no argu- ments, print all currently defined aliases. If the -m flag is given the arguments are taken as patterns (they should be quoted to preserve them from being inter- preted as glob patterns) and the aliases matching these patterns are printed. When printing aliases and the -g or -r flags are present, then restrict the printing to global or regular aliases, respectively. If the -L flag is present, then print each alias in a manner suitable for putting in a startup script. The exit status is nonzero if a name (with no value) is given for which no alias has been defined. autoload [ name ... ] For each of the names (which are names of functions), create a function marked undefined. The fpath variable will be searched to find the actual function definition when the function is first referenced. The definition is contained in a file of the same name as the func- tion. If the file found contains a standard definition for the function, that is stored as the function; oth- erwise, the contents of the entire file are stored as the function. The latter format allows functions to be used directly as scripts. bg [ job ... ] job ... & Put each specified job in the background, or the current job if none is specified. bindkey -mevd bindkey -r in-string ... bindkey [ -a ] in-string [ command ] ... bindkey -s [ -a ] in-string out-string ... The -e and -v options put the keymaps in emacs mode or vi mode respectively; they cannot be used simultane- ously. The -d option resets all bindings to the compiled-in settings. If not used with options -e or -v, the maps will be left in emacs mode, or in vi mode if the VISUAL or EDITOR variables exist and contain the string "vi". Metafied characters are bound to self- insert by default. The -m option loads the compiled-in bindings of these characters for the mode determined by the preceding options, or the current mode if used alone. Any previous bindings done by the user will be preserved. If the -r option is given, remove any bind- ing for each in-string. If the -s option is not speci- fied, bind each in-string to a specified command. If no command is specified, print the binding of in-string if it is bound, or return a nonzero exit code if it is not bound. If the -s option is specified, bind each in- string to each specified out-string. When in-string is typed, out-string will be pushed back and treated as input to the line editor. This process is recursive but, to avoid infinite loops, the shell will report an error if more than 20 consecutive replacements happen. If the -a option is specified, bind the in-strings in the alternative keymap instead of the standard one. The alternative keymap is used in vi command mode. It's possible for an in-string to be bound to something and also be the beginning of a longer bound string. In this case the shell will wait a certain time to see if more characters are typed and if not it will execute the binding. This timeout is defined by the KEYTIMEOUT parameter; its default is 0.4 sec. No timeout is done if the prefix string is not bound. For either in-string or out-string, control characters may be specified in the form ^X, and the backslash may be used to introduce one of the following escape sequences: \a bell character \n linefeed (newline) \b backspace \t horizontal tab \v vertical tab \f form feed \r carriage return \e, \E escape \NNN character code in octal \xNN character code in hexadecimal \M-xxx character or escape sequence with meta bit set. The `-' after the `M' is optional. \C-X control character. The `-' after the `C' is optional. In all other cases, \ escapes the following character. Delete is written as `^?'. Note that `\M^?' and `^\M?' are not the same. Multi-character in-strings cannot contain the null character ("^@" or "^ "). If they appear in a bindkey command, they will be silently translated to "\M-^@". This restriction does not apply to out-strings, single-character in-strings and the first character of a multi-char in-string. break [ n ] Exit from an enclosing for, while, until, select, or repeat loop. If n is specified, then break n levels instead of just one. builtin name [ args ] ... Executes the builtin name, with the given args. bye Same as exit. cd [ arg ] cd old new cd _n Change the current directory. In the first form, change the current directory to arg, or to the value of HOME if arg is not specified. If arg is -, change to the value of OLDPWD, the previous directory. If a directory named arg is not found in the current direc- tory and arg does not begin with a slash, search each component of the shell parameter cdpath. If the option CDABLEVARS is set, and a parameter named arg exists whose value begins with a slash, treat its value as the directory. The second form of cd substitutes the string new for the string old in the name of the current directory, and tries to change to this new directory. The third form of cd extracts an entry from the direc- tory stack, and changes to that directory. An argument of the form +n identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings of + and - in this context are swapped. chdir Same as cd. command simple command See the secion PRECOMMAND MODIFIERS in zshmisc(1). compctl Compctl has it's own man page. Check zshcompctl(1). continue [ num ] Resume the next iteration of the enclosing for, while, until, select, or repeat loop. If n is specified, break out of n - 1 loops and resume at the nth enclos- ing loop. declare [ arg ... ] Same as typeset. dirs [ -v ] [ arg ... ] With no arguments, print the contents of the directory stack. If the -v option is given, number the direc- tories in the stack when printing. Directories are added to this stack with the pushd command, and removed with the cd or popd commands. If arguments are speci- fied, load them onto the directory stack, replacing anything that was there, and push the current directory onto the stack. disable [ -afmr ] arg ... Disable the hash table element named arg temporarily. The default is to disable builtin commands. This allows you to use an external command with the same name as a builtin command. The -a option causes dis- able to act on aliases. The -f option causes disable to act on shell functions. The -r options causes dis- able to act on reserved words. Without arguments all disabled hash table elements from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (should be quoted to preserve them from being taken as glob patterns) and all hash table elements from the corresponding hash table match- ing these patterns are disabled. Disabled objects can be enabled with the enable command. disown [ job ... ] job ... &| job ... &! Remove the specified jobs from the job table; the shell will no longer report their status, and will not com- plain if you try to exit an interactive shell with them running or stopped. If no job is specified, use the current job. echo [ -neE ] [ arg ... ] Write each arg on the standard output, with a space separating each one. If the -n flag is not present, print a newline at the end. echo recognizes the fol- lowing escape sequences: \a bell character \b backspace \c don't print an ending newline \e escape \f form feed \n newline \r carriage return \t horizontal tab \v vertical tab \\ backslash \0NNN character code in octal, with a maximum of three digits after the zero; a non-octal digit ter- minates the number \xNN character code in hexadecimal, with a maximum of two digits after the `x'; a non-hexadecimal digit terminates the number. The -E falg or the BSD_ECHO option can be used to dis- able these escape sequences. In the later case -e flag can be used to enable them. echotc cap [ arg ... ] Output the termcap string corresponding to the capabil- ity cap, with optional arguments. emulate [ -LR ] [ zsh | sh | ksh | csh ] Set up zsh options to emulate the specified shell as much as possible. csh will never be fully emulated. If the argument is not one of the shells listed above, zsh will be used as a default. If the -R option is given, all options are reset to their default value corresponding to the specified emulation mode, except for certain options describing the interactive environ- ment; otherwise, only those options likely to cause portability problems in scripts and functions are altered. If the -L option is given, the option LOCAL_OPTIONS will be set as well, causing the effect of the emulate command to be local to the immediately surrounding shell function, if any; normally this is turned off in all emulation modes except ksh. enable [ -afmr ] arg ... Enable the hash table element named arg, presumably disabled earlier with disable. The default is to enable builtin commands. The -a option causes enable to act on aliases. The -f option causes enable to act on shell functions. The -r option causes enable to act on reserved words. Without arguments all enable hash table elememts from the corresponding hash table are printed. With the -m flag the arguments are taken as patterns (should be quoted) and all hash table elements from the corresponding hash table matching these pat- terns are enabled. Enabled objects can be disabled with the disable builtin command. eval [ arg ... ] Read the arguments as input to the shell and execute the resulting command(s) in the current shell process. exec simple command See the secion PRECOMMAND MODIFIERS in zshmisc(1). exit [ n ] Exit the shell with the exit code specified by n; if none is specified, use the exit code from the last com- mand executed. An EOF condition will also cause the shell to exit, unless the IGNOREEOF option is set. export [ name[=value] ... ] The specified names are marked for automatic export to the environment of subsequently executed commands. export is equivalent to typeset -x. false Do nothing and return an exit code of 1. fc [ -e ename ] [ - nlrdDfEim ] [ old=new ... ] [ first [ last ] ] fc -ARWI [ filename ] Select a range of commands from first to last from the history list. The arguments first and last may be specified as a number or as a string. A negative number is used as an offset to the current history event number. A string specifies the most recent event beginning with the given string. All substitutions old=new, if any, are then performed on the commands. If the -l flag is given, the resulting commands are listed on standard output. If the -m flag is also given the first argument is taken as a pattern (should be quoted) and only the history events matching this pattern will be shown. Otherwise the editor program ename is invoked on a file containing these history events. If ename is not given, the value of the param- eter FCEDIT is used. If ename is "-", no editor is invoked. When editing is complete, the edited command(s) is executed. If first is not specified, it will be set to -1 (the most recent event), or to -16 if the -l flag is given. If last is not specified, it will be set to first, or to -1 if the -l flag is given. The flag -r reverses the order of the commands and the flag -n suppresses command numbers when listing. Also when listing, -d prints timestamps for each command, and -f prints full time-date stamps. Adding the -E flag causes the dates to be printed as `dd.mm.yyyy', instead of the default `mm/dd/yyyy'. Adding the -i flag causes the dates to be printed as `yyyy-mm-dd', in a fixed format. With the -D flag, fc prints elapsed times. fc -R reads the history from the given file, fc -W writes the history out to the given file, and fc -A appends the history out to the given file. fc -AI (-WI) appends (writes) only those events that are new since last incremental append (write) to the history file. In any case the file will have no more than SAVEHIST entries. fg [ job ... ] job ... Bring the specified jobs to the foreground. If no job is specified, use the current job. functions [ _tum ] [ name ... ] Equivalent to typeset -f. getln name ... Read the top value from the buffer stack and put it in the shell parameter name. Equivalent to read -zr. The flags -c, -l, -A, -e, -E, and -n are supported, too. getopts optstring name [ arg ... ] Checks arg for legal options. If arg is omitted, use the positional parameters. A valid option argument begins with a + or a -. An argument not beginning with a + or a -, or the argument --, ends the options. opt- string contains the letters that getopts recognizes. If a letter is followed by a `:', that option is expected to have an argument. The options can be separated from the argument by blanks. Each time it is invoked, getopts places the option letter it finds in the shell parameter name, prepended with a + when arg begins with a +. The index of the next arg is stored in OPTIND. The option argument, if any, is stored in OPTARG. A leading : in optstring causes getopts to store the letter of the invalid option in OPTARG, and to set name to `?' for an unknown option and to `:' when a required option is missing. Otherwise, getopts prints an error message. The exit status is nonzero when there are no more options. hash [ -dfmr ] [ name[=value] ] ... With no arguments or options, hash will list the entire command hash table. The -m option causes the arguments to be taken as pat- terns (they should be quoted) and the elements of the command hash table matching these patterns are printed. The -r option causes the command hash table to be thrown out and restarted. The -f option causes the entire path to be searched, and all the commands found are added to the hash table. These options cannot be used with any arguments. For each name with a corresponding value, put name in the command hash table, associating it with the path- name value. Whenever name is used as a command argu- ment, the shell will try to execute the file given by value. For each name with no corresponding value, search for name in the path, and add it to the command hash table, and associating it with the discovered path, if it is found. Adding the -d option causes hash to act on the named directory table instead of the command hash table. The remaing discussion of hash will assume that the -d is given. If invoked without any arguments, and without any other options, hash -d lists the entire named directory table. The -m option causes the arguments to be taken as pat- terns (they should be quoted) and the elements of the named directory table matching these patterns are printed. The -r option causes the named directory table to be thrown out and restarted so that it only contains `~'. The -f option causes all usernames to be added to the named directory table. There options cannot be used with any arguments. For each name with a corresponding value, put name in the named directory table. The directory name name is then associated with the specified path value, so that value may be referred to as `~name'. For each name with no corresponding value, search for as a username and as a parameter. If it is found, it is added to the named directory hash table. history [ -nrdDfEim ] [ first [ last ] ] Same as fc -l. integer [ _lrtux ] [ name[=value] ] ... Same as typeset -i, except that options irrelevant to integers are not permitted. jobs [ -lprs ] [ job ... ] Lists information about each given job, or all jobs if job is omitted. The -l flag lists process ids, and the -p flag lists process groups. If the -r flag is speci- fied only running jobs will be listed and if the -s flag is given only stopped jobs are shown. kill [ -s signal_name ] job ... kill [ -sig ] job ... kill -l [ sig ... ] Sends either SIGTERM or the specified signal to the given jobs or processes. Signals are given by number or by names, without the SIG prefix. If the signal being sent is not KILL or CONT, then the job will be sent a CONT signal if it is stopped. The argument job can be the process id of a job not in the job list. In the third form, kill -l, if sig is not specified the signal names are listed. Otherwise, for each sig that is a name, the corresponding signal number is listed. For each sig that is a signal number or a number representing the exit status of a process which was terminated or stopped by a signal the name of the sig- nal is printed. let arg ... Evaluate each arg as an arithmetic expression. See ARITHMETIC EVALUATION in zshmisc(1) for a description of arithmetic expressions. The exit status is 0 if the value of the last expression is nonzero, and 1 other- wise. limit [ -hs ] [ resource [ limit ] ] ... Set or display resource limits. Unless the -s flag is given the limit applies only the children of the shell. If -s is given without other arguments, the resource limits of the current shell is set to the previously set resource limits of the children. If limit is not specified, print the current limit placed on resource; otherwise set the limit to the specified value. If the -h flag is given, use hard limits instead of soft lim- its. If no resource is given, print all limits. resource is one of: cputime Maximum CPU seconds per process. filesize Largest single file allowed. datasize Maximum data size (including stack) for each pro- cess. stacksize Maximum stack size for each process. coredumpsize Maximum size of a core dump. resident Maximum resident set size. memoryuse The same as resident. memorylocked Maximum amount of memory locked in RAM. descriptors Maximum value for a file descriptor. openfiles Maximum number of open files. vmemorysize Maximum amount of virtual memory. Which of these resource limits are available depends on the system. limit is a number, with an optional scal- ing factor, as follows: nh hours. nk kilobytes. This is the default for all but cpu- time. nm megabytes or minutes. mm:ss minutes and seconds. local [ _LRZilrtu [n]] [ name[=value] ] ... Same as typeset, except that the options -x and -f are not permitted. log List all users currently logged in who are affected by the current setting of the watch parameter. logout Exit the shell, if this is a login shell. noglob simple command See the secion PRECOMMAND MODIFIERS in zshmisc(1). popd [ _n ] Removes a entry from the directory stack, and perform a cd to the new top directory. With no argument, the current top entry is removed. An argument of the form +n identifies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings of + and - in this context are swapped. print [ -nrslzpNDPoOicm ] [ -un ] [ -R [ -en ]] [ arg ... ] With no flags or with flag -, the arguments are printed on the standard output as described by echo, with the following differences: the escape sequence \M-x metafies the character x (sets the highest bit), \C-x produces a control character (\C-@ and \C-? give the characters NULL and delete) and \E is a synonym for \e. Finally, if not in an escape sequence, \ escapes the following character and is not printed. -r ignore the escape conventions of echo. -R emulate the BSD echo command which does not pro- cess escape sequences unless the -e flag is given. The -n flag suppresses the trailing newline. Only the -e and -n flags are recognized after -R, all other arguments and options are printed. -m Take the fist argument as a pattern (should be quoted) and remove it from the argument list together with subsequent arguments that do not match this pattern. -s place the results in the history list instead of on the standard output. -n do not add a newline to the output. -l print the arguments separated by newlines instead of spaces. -N print the arguments separated and terminated by nulls. -o print the arguments sorted in ascending order. -O print the arguments sorted in descending order. -i if given together with -o or -O makes them work case independently -c print the arguments in columns -un print the arguments to file descriptor n. -p print the arguments to the input of the coprocess. -z push the arguments onto the editing buffer stack, separated by spaces; no escape sequences are recognized. -D treat the arguments as directory names, replacing prefixes with ~ expressions, as appropriate. -P recognize the same escape sequences as in the PROMPT parameter. pushd [ arg ] pushd old new pushd _n Change the current directory, and push the old current directory onto the directory stack. In the first form, change the current directory to arg. If arg is not specified, change to the second directory on the stack (that is, exchange the top two entries), or change to the value of HOME if the PUSHD_TO_HOME option is set or if there is only one entry on the stack. If arg is -, change to the value of OLDPWD, the previous directory. If a directory named arg is not found in the current directory and arg does not contain a slash, search each component of the shell parameter cdpath. If the option CDABLEVARS is set, and a parameter named arg exists whose value begins with a slash, treat its value as the directory. If the option PUSHD_SILENT is not set, the directory stack will be printed after a pushd is per- formed. The second form of pushd substitutes the string new for the string old in the name of the current directory, and tries to change to this new directory. The third form of pushd changes directory by rotating the directory list. An argument of the form +n identi- fies a stack entry by counting from the left of the list shown by the dirs command, starting with zero. An argument of the form -n counts from the right. If the PUSHD_MINUS option is set, the meanings of + and - in this context are swapped. pushln Equivalent to print -nz. pwd [ -r ] Print the absolute pathname of the current working directory. If the -r flag is specified or the CHASE_LINKS option is set, the printed path will not contain symbolic links. r Equivalent to fc -e -. read [ -rzpqAclneE ] [ -k [ num ] ] [ -un ] [ name?prompt ] [ name ... ] Read one line and break it into fields using the char- acters in IFS as separators. -r Raw mode: a \ at the end of a line does not sig- nify line continuation. -q Read only one character from the terminal and set name to `y' if this character was `y' or `Y' and to `n' otherwise. With this flag set the return value is zero only if the character was `y' or `Y'. -k [ num ] Read only one (or num) characters from the termi- nal. -z Read from the editor buffer stack. The first field is assigned to the first name, the second field to the second name, etc., with leftover fields assigned to the last name. -e -E The words read are printed after the whole line is read. If the -e flag is set, the words are not assigned to the parameters. -A The first name is taken as the name of an array and all words are assigned to it. -c -l These flags are allowed only if called inside a function used for completion (specified with the -K flag to compctl). If the -c flag is given, the words of the current command are read. If the -l flag is given, the whole line is assigned as a scalar. If name is omitted then REPLY is used for scalars and reply for arrays. -n Together with either of the previous flags, this option gives the number of the word the cursor is on or the index of the character the cursor is on respectively. -un Input is read from file descriptor n. -p Input is read from the coprocess. If the first argument contains a ?, the remainder of this word is used as a prompt on standard error when the shell is interactive. The exit status is 0 unless an end-of-file is encountered. readonly [ name[=value] ] ... The given names are marked readonly; these names cannot be changed by subsequent assignment. rehash [ -df ] Throw out the command hash table and start over. If the -f option is set, rescan the command path immedi- ately, instead of rebuilding the hash table incremen- tally. The -d option causes rehash to act on the named direc- tory table instead of the command hash table. This reduces the named directory table to only the `~' entry. If the -f option is also used, the named direc- tory table is rebuilt immediately. rehash is equivalent to hash -r. return [ n ] Causes a shell function or . script to return to the invoking script with the return status specified by n. If n is omitted then the return status is that of the last command executed. If return was executed from a trap in a TRAPxxx func- tion, the effect is different for zero and non-zero return status. With zero status (or after an implicit return at the end of the trap), the shell will return to whatever it was previously processing; with a non- zero status, the shell will behave as interrupted except that the return status of the trap is retained. Note that the signal which caused the trap is passed as the first argument, so the statement `return $((128+$1))' will return the same status as if the sig- nal had not been trapped. sched [+]hh:mm command ... sched [ -item ] Make an entry in the scheduled list of commands to exe- cute. The time may be specified in either absolute or relative time. With no arguments, prints the list of scheduled commands. With the argument -item, removes the given item from the list. ] set [ _options ] [ _o option name ] ... [ _A [ name ] ] [ arg ... Set the options for the shell and/or set the positional parameters, or declare and set an array. If the -s option is given it causes the specified arguments to be sorted before assigning them to the positional parame- ters (or to the array name if -A is used). With +s sort arguments in descending order. For the meaning of the other flags, see the zshoptions man page. Flags may be specified by name using the -o option. If the -A flag is specified, name is set to an array contain- ing the given args; if +A is used and name is an array, the gien arguments will replace the initial elements of that array; if no name is specified, all arrays are printed. Otherwise the positional parameters are set. If no arguments are given, then the names and values of all parameters are printed on the standard output. If the only argument is +, the names of all parameters are printed. setopt [ _options ] [ name ... ] Set the options for the shell. All options specified either with flags or by name are set. If no arguments are supplied, the names of all options currently set are printed. In option names, case is insignificant, and all underscore characters are ignored. If the -m flag is given the arguments are taken as patterns (should be quoted to preserve them from being inter- preted as glob patterns) and all options with names matching these patterns are set. shift [ n ] [ name ... ] The positional parameters from $n+1 ... are renamed $1, where n is an arithmetic expression that defaults to 1. If any names are given then the arrays with these names are shifted instead of the positional parameters. source Same as ., except that the current directory is always searched and is always searched first, before direc- tories in path. suspend [ -f ] Suspend the execution of the shell (send it a SIGTSTP) until it receives a SIGCONT. If the -f option is not given, complain if this is a login shell. test arg ... [ arg ... ] Like the system version of test. Added for compatibil- ity; use conditional expressions instead. times Print the accumulated user and system times for the shell and for processes run from the shell. trap [ arg ] [ sig ] ... arg is a series of commands (usually quoted to protect it from immediate evaluation by the shell) to be read and executed when the shell receives sig. Each sig can be given as a number or as the name of a signal. If arg is -, then all traps sig are reset to their default values. If arg is the null string, then this signal is ignored by the shell and by the commands it invokes. If sig is ZERR then arg will be executed after each command with a nonzero exit status. If sig is DEBUG then arg will be executed after each command. If sig is 0 or EXIT and the trap statement is executed inside the body of a function, then the command arg is exe- cuted after the function completes. If sig is 0 or EXIT and the trap statement is not executed inside the body of a function, then the command arg is executed when the shell terminates. The trap command with no arguments prints a list of commands associated with each signal. Note that traps defined with the trap builtin are slightly different from those defined as `TRAPNAL () { ... }', as the latter have their own function environment (line numbers, local variables, etc.) while the former use the environment of the com- mand in which they were called. true Do nothing and return an exit code of 0. ttyctl -fu The -f option freezes the tty, and -u unfreezes it. When the tty is frozen, no changes made to the tty set- tings by external programs will be honored by the shell, except for changes in the size of the screen; the shell will simply reset the settings to their pre- vious values as soon as each command exits or is suspended. Thus, stty and similar programs have no effect when the tty is frozen. Without options it reports whether the terminal is frozen or not. type [ -fpam ] name ... Same as whence -v. typeset [ _LRUZfilrtuxm [n]] [ name[=value] ] ... Set attributes and values for shell parameters. When invoked inside a function a new parameter is created which will be unset when the function completes. The new parameter will not be exported unless ALLEXPORT is set, in which case the parameter will be exported pro- vided no parameter of that name already exists. The following attributes are valid: -L Left justify and remove leading blanks from value. If n is nonzero, it defines the width of the field; otherwise it is determined by the width of the value of the first assignment. When the parameter is printed, it is filled on the right with blanks or truncated if necessary to fit the field. Leading zeros are removed if the -Z flag is also set. -R Right justify and fill with leading blanks. If n is nonzero if defines the width of the field; oth- erwise it is determined by the width of the value of the first assignment. When the parameter is printed, the field is left filled with blanks or truncated from the end. -U For arrays keep only the first element of each duplications. It can also be set for colon separated special parameters like PATH or FIGNORE, etc. -Z Right justify and fill with leading zeros if the first non-blank character is a digit and the -L flag has not been set. If n is nonzero it defines the width of the field; otherwise it is determined by the width of the value of the first assignment. -f The names refer to functions rather than parame- ters. No assignments can be made, and the only other valid flags are -t and -u. The flag -t turns on execution tracing for this function. The flag -u causes this function to be marked for autoloading. The fpath parameter will be searched to find the function definition when the function is first referenced; see autoload. -i Use an internal integer representation. If n is nonzero it defines the output arithmetic base, otherwise it is determined by the first assign- ment. -l Convert to lower case. -r The given names are marked readonly. -t Tags the named parameters. Tags have no special meaning to the shell. -u Convert to upper case. -x Mark for automatic export to the environment of subsequently executed commands. Using + rather than - causes these flags to be turned off. If no arguments are given but flags are specified, a list of named parameters which have these flags set is printed. Using + instead of - keeps their values from being printed. If no arguments or options are given, the names and attributes of all parameters are printed. If only the -m flag is given the arguments are taken as patterns (should be quoted) and all parameters or func- tions (with the -f flag) with matching names are printed. ulimit [ -SHacdflmnpstv ] [ limit ] ... Set or display resource limits of the shell and the processes started by the shell. The value of limit can be a number in the unit specified below or the value unlimited. If the -H flag is given use hard limits instead of soft limits. If the -S flag is given together with the -H flag set both hard and soft lim- its. If no options are used, the file size limit (-f) is assumed. If limit is omitted the current value of the specified resources are printed. When more than one resource values are printed the limit name and unit is printed before each value. -a Lists all of the current resource limits. -c The number of 512-byte blocks on the size of core dumps. -d The number of K-bytes on the size of the data segment. -f The number of 512-byte blocks on the size of files written. -l The number of K-bytes on the size of locked-in memory. -m The number of K-bytes on the size of physical memory. -n The number of open file descriptors. -s The number of K-bytes on the size of the stack. -t The number of CPU seconds to be used. -u The number of processes available to the user. -v The number of K-bytes on the size of virtual memory. umask [ -S ] [ mask ] The umask is set to mask. mask can be either an octal number or a symbolic value as described in chmod(1). If mask is omitted, the current value is printed. The -S option causes the mask to be printed as a symbolic value. Otherwise, the mask is printed as an octal number. Note that in the symbolic form the permissions you specify are those which are to be allowed (not denied) to the users specified. unalias [ -m ] name ... The alias definition, if any, for each name is removed. With the -m flag the arguments are taken as patterns (should be quoted) and all aliases with names matching the patterns are removed. unalias is equivalent to unhash -a. unfunction [ -m ] name ... The function definition, if any, for each name is removed. If the -m flag is specified the arguments are taken as patterns (should be quoted) and all functions with names matching the patterns are removed. unfunc- tion is equivalent to unhash -f. unhash [ -adfm ] name ... Remove the element named name from an internal hash table. The default is remove elements from the command hash table. The -a option causes unhash to remove aliases. The -f option causes unhash to remove shell functions. The -d options causes unhash to remove named directories. If the -m flag is given the argu- ments are taken as patterns (should be quoted) and all elements of the corresponding hash table with matching names will be removed. unlimit [ -hs ] resource ... The resource limit for each resource is set to the hard limit. If the -h flag is given and the shell is running as root, the hard resource limit for each resource is removed. The resources of the shell pro- cess are only changed if the -s flag is given. unset [ -fm ] name ... Each named parameter is unset. If the -m flag is speci- fied the arguments are taken as patterns (should be quoted) and all parameters with matching names are unset. Unset -f is equivalent to unfunction. unsetopt [ _options ] [ name ... ] Unset the options for the shell. All options specified either with flags or by name are unset. If the -m flag is given the arguments are considered to be patterns (don't forget to quote them) and all options with names matching these patterns are unset. vared [ -c ] [ -h ] [ -p prompt ] [ -r rprompt ] name The value of the parameter name is loaded into the edit buffer, and the line editor is invoked. When the edi- tor exits, name is set to the string value returned by the editor. If the -c flag is given the parameter is created if it doesn't already exist. If the -p flag is given the following string will be taken as the prompt to display at the left and if the -r flag is given the following string gives the prompt to display at the right. If the -h flag is specified, the history can be accessed from zle. wait [ job ... ] Wait for the specified jobs or processes. If job is not given then all currently active child processes are waited for. Each job can be either a job specification or the process-id of a job in the job table. The exit status from this command is that of the job waited for. whence [ -vcfpam ] name ... For each name, indicate how it would be interpreted if used as a command name. The -v flag produces a more verbose report. The -c flag prints the results in a csh-like format, and takes precedence over -v. The -f flag causes the contents of a shell function to be displayed, which would otherwise not happen unless the -c flag were used. The -p flag does a path search for name even if it is an alias, reserved word, shell func- tion or builtin. The -a flag does a search for all occurrences of name throughout the command path. With the -m flag the arguments are taken as patterns (should be quoted) and the information is displayed for each command matching one of these patterns. where Same as whence -ca. which [ -pam ] name ... Same as whence -c. NOTES Source for zsh is available in the SUNWzshS package. NAME zshcompctl - zsh programmable completion DESCRIPTION compctl [ -CDT ] options [ command ... ] compctl [ -CDT ] options [ -x pattern options - ... -- ] [ + options [ -x ... -- ] ... [+] ] [ command ... ] compctl -L [ -CDT ] [ command ... ] compctl + command ... Control the editor's completion behavior according to the supplied set of options. Various editing commands, notably expand-or-complete-word, usually bound to TAB, will attempt to complete a word typed by the user, while others, notably delete-char-or-list, usually bound to ^D in emacs editing mode, list the possibilities; compctl controls what those possibilities are. They may for example be filenames (the most common case, and hence the default), shell variables, or words from a user-specified list. COMMAND FLAGS Completion of the arguments of a command may be different for each command or may use the default. The behavior when completing the command word itself may also be separately specified. These correspond to the following flags and arguments, all of which (except for -L) may be combined with any combination of the options described subsequently in the section OPTION FLAGS: command ... controls completion for the named commands, which must be listed last on the command line. If com- pletion is attempted for a command with a pathname containing slashes and no completion definition is found, the search is retried with the last path- name component. Note that aliases are expanded before the command name is determined unless the COMPLETE_ALIASES option is set. Commands should not be combined with the -D, -C or -T flags. -D controls default completion behavior for the argu- ments of commands not assigned any special behavior. If no compctl -D command has been issued, filenames are completed. -C controls completion when the command word itself is being completed. If no compctl -C command has been issued, the names of any executable command (whether in the path or specific to the shell, such as aliases or functions) are completed. -T supplies completion flags to be used before any other processing is done, even those given to specific commands with other compctl definitions. This is only useful when combined with extended completion (the -x flag, see the section EXTENDED COMPLETION below). Using this flag you can define default behavior which will apply to all commands without exception, or you can alter the standard behavior for all commands. For example, if your access to the user database is too slow and/or it contains too many users (so that completion after ~ is too slow to be usable), you can use compctl -Tx 'C[0,*/*]' -f - 's[~]' -k friends -S/ to complete the strings in the array friends after a ~. The first argument is necessary so that this form of ~-completion is not tried after the direc- tory name is finished. -L lists the existing completion behavior in a manner suitable for putting into a start-up script; the existing behavior is not changed. Any combination of the above forms may be specified, otherwise all defined completions are listed. Any other flags supplied are ignored. no argument If no argument is given, compctl lists all defined completions in an abbreviated form; with a list of options, all completions with those flags set (not counting extended completion) are listed. If the + flag is alone and followed immediately by the command list, the completion behavior for all the com- mands in the list is reset to the default. In other words, completion will subsequently use the options specified by the -D flag. OPTION FLAGS [ -fcFBdeaRGovNAIOPZEnbjrzu ] [ -k array ] [ -g globstring ] [ -s subststring ] [ -K function ] [ -H num pattern ] [ -Q ] [ -P prefix ] [ -S suffix ] [ -q ] [ -X explanation ] [ -l cmd ] [ -U ] The remaining options specify the type of command arguments to look for during completion. Any combination of these flags may be specified; the result is a sorted list of all the possibilities. The options are as follows. Simple flags These produce completion lists made up by the shell itself: -f Filenames and filesystem paths. -c Command names, including aliases, shell functions, builtins and reserved words. -F Function names. -B Names of builtin commands. -m Names of external commands. -w Reserved words. -a Alias names. -R Names of regular (non-global) aliases. -G Names of global aliases. -d This can be combined with -F, -B, -w, -a, -R and -G to get names of disabled functions, builtins, reserved words or aliases. -e This option (to show enabled commands) is in effect by default, but may be combined with -d; -de in combination with -F, -B, -w, -a, -R and -G will complete names of functions, builtins, reserved words or aliases whether or not they are disabled. -o Names of shell options (see the zshoptions manual page). -v Names of any variable defined in the shell. -N Names of scalar (non-array) parameters. -A Array names. -I Names of integer variables. -O Names of read-only variables. -p Names of parameters used by the shell (including special parameters). -Z Names of shell special parameters. -E Names of environment variables. -n Named directories. -b Key binding names. -j Job names: the first word of the job leader's command line. This is useful with the kill buil- tin. -r Names of running jobs. -z Names of suspended jobs. -u User names. Flags with arguments These have user supplied arguments to determine how the list of completions is to be made up: -k array Names taken from the elements of $array (note that the $ does not appear on the command line). Alternatively, the argument array itself may be a set of space- or comma-separated values in parentheses, in which any delimiter may be escaped with a backslash; in this case the argument should be quoted. For example, compctl -k "(cputime filesize datasize stacksize coredumpsize resident descriptors)" limit -g globstring The globstring is expanded using filename glob- bing; it should be quoted to protect it from immediate expansion. The resulting filenames are taken as the possible completions. Use `*(/)' instead of `*/' for directories. The fignore spe- cial parameter is not applied to the resulting files. More than one pattern may be given separated by blanks. (Note that brace expansion is not part of globbing. Use the syntax `(either|or)' to match alternatives.) -s subststring The subststring is split into words and these words are than expanded using all shell expansion mechanisms (see the zshexpn manual page). The resulting words are taken as possible completions. The fignore special parameter is not applied to the resulting files. Note that -g is faster for filenames. -K function Call the given function to get the completions. The function is passed two arguments: the prefix and the suffix of the word on which completion is to be attempted, in other words those characters before the cursor position, and those from the cursor position onwards. The function should set the variable reply to an array containing the com- pletions (one completion per element); note that reply should not be made local to the function. From such a function the command line can be accessed with the -c and -l flags to the read builtin. For example, function whoson { reply=(`users`); } compctl -K whoson talk completes only logged-on users after `talk'. Note that `whoson' must return an array so that "reply=`users`" is incorrect. -H num pattern The possible completions are taken from the last num history lines. Only words matching pattern are taken. If num is zero or negative the whole his- tory is searched and if pattern is the empty string all words are taken (as with `*'). A typi- cal use is compctl -D -f + -H 0 '' \ -X '(No file found; using history)' which forces completion to look back in the his- tory list for a word if no filename matches. The explanation string is useful as it tells the user that no file of that name exists, which is other- wise ambiguous. (See the next section for -X). Control flags These do not directly specify types of name to be completed, but manipulate the options that do: -Q This instructs the shell not to quote any meta- characters in the possible completions. Normally the results of a completion are inserted into the command line with any metacharacters quoted so that they are interpreted as normal characters. This is appropriate for filenames and ordinary strings. However, for special effects, such as inserting a backquoted expression from a comple- tion array (-k) so that the expression will not be evaluated until the complete line is executed, this option must be used. -P prefix The prefix is inserted just before the completed string; any initial part already typed will be completed and the whole prefix ignored for comple- tion purposes. For example, compctl -j -P "%" kill inserts a `%' after the kill command and then com- pletes job names. -S suffix When a completion is found the suffix is inserted after the completed string. In the case of menu completion the suffix is inserted immediately, but it is still possible to cycle through the list of completions by repeatedly hitting the same key. -q If used with a suffix as specified by the previous option, this causes the suffix to be removed if the next character typed is a blank or does not insert anything (the same rule as used for the AUTO_REMOVE_SLASH option). The option is most useful for list separators (comma, colon, etc.). -l cmd This option cannot be combined with any other. It restricts the range of command line words that are considered to be arguments. If combined with one of the extended completion patterns `p[...]', `r[...]', or `R[...]' (see the section EXTENDED COMPLETION below) the range is restricted to the range of arguments specified in the brackets. Completion is then performed as if these had been given as arguments to the cmd supplied with the option. If the cmd string is empty the first word in the range is instead taken as the command name, and command name completion performed on the first word in the range. For example, compctl -x 'r[-exec,;]' -l '' -- find completes arguments between `-exec' and the fol- lowing `;' (or the end of the command line if there is no such string) as if they were a separate command line. -U Use the whole list of possible completions, whether or not they actually match the word on the command line. The word typed so far will be deleted. This is most useful with a function (given by the -K option) which can examine the word components passed to it (or via the read builtin's -c and -l flags) and use its own cri- teria to decide what matches. If there is no com- pletion, the original word is retained. -X explanation Print explanation when trying completion on the current set of options. A `%n' in this string is replaced by the number of matches. ALTERNATIVE COMPLETION compctl [ -CDT ] options + options [ + ... ] [ + ] command ... The form with `+' specifies alternative options. Completion is tried with the options before the first `+'. If this pro- duces no matches completion is tried with the flags after the `+' and so on. If there are no flags after the last `+' and a match has not been found up to that point, default completion is tried. EXTENDED COMPLETION compctl [ -CDT ] options -x pattern options - ... -- [ com- mand ... ] compctl [ -CDT ] options [ -x pattern options - ... -- ] [ + options [ -x ... -- ] ... [+] ] [ command ... ] The form with `-x' specifies extended completion for the commands given; as shown, it may be combined with alterna- tive completion using +. Each pattern is examined in turn; when a match is found, the corresponding options, as described in the section OPTION FLAGS above, are used to generate possible completions. If no pattern matches, the options given before the -x are used. Note that each pattern should be supplied as a single argu- ment and should be quoted to prevent expansion of metachar- acters by the shell. A pattern is built of sub-patterns separated by commas; it matches if at least one of these sub-patterns matches (they are `or'ed'). These sub-patterns are in turn composed of other sub-patterns separated by white spaces which match if all of the sub-patterns match (they are `and'ed'). An ele- ment of the sub-patterns is of the form `c[...][...]', where the pairs of brackets may be repeated as often as necessary, and matches if any of the sets of brackets match (an `or'). The example below makes this clearer. The elements may be any of the following: s[string] ... Matches if the current word on the command line starts with one of the strings given in brackets. The string is not removed and is not part of the completion. S[string] ... Like s[string] except that the string is part of the completion. p[from,to] ... Matches if the number of the current word is between one of the from and to pairs inclusive. The comma and to are optional; to defaults to the same value as from. The numbers may be negative: -n refers to the n'th last word on the line. c[offset,string] ... Matches if the string matches the word offset by offset from the current word position. Usually offset will be negative. C[offset,pattern] ... Like c but using pattern matching instead. w[index,string] ... Matches if the word in position index is equal to the corresponding string. Note that the word count is made after any alias expansion. W[index,pattern] ... Like w but using pattern matching instead. n[index,string] ... Matches if the current word contains string. Any- thing up to and including the index'th occurrence of this string will not be considered part of the completion, but the rest will. Index may be nega- tive to count from the end: in most cases, index will be 1 or -1. N[index,string] ... Like n[index,string] except that the string will be taken as a character class. Anything up to and including the index'th occurrence of any of the characters in string will not be considered part of the completion. m[min,max] ... Matches if the total number of words lies between min and max inclusive. r[str1,str2]... Matches if the cursor is after a word with prefix str1. If there is also a word with prefix str2 on the command line it matches only if the cursor is before this word. R[str1,str2]... Like r but using pattern matching instead. EXAMPLE compctl -u -x 's[+] c[-1,-f],s[-f+]' -g '~/Mail/*(:t)' \ - 's[-f],c[-1,-f]' -f -- mail This is to be interpreted as follows: If the current command is mail, then if ((the current word begins with + and the previous word is -f) or (the current word begins with -f+)), then complete the non-directory part (the :t glob modifier) of files in the directory ~/Mail; else if the current word begins with -f or the previous word was -f, then complete any file; else complete user names. NOTES Source for zsh is available in the SUNWzshS package. NAME zshparam - zsh parameters DESCRIPTIONS A parameter has a name, a value, and a number of attributes. A name may be any sequence of alphanumeric characters and _'s, or the single characters *, @, #, ?, -, $, or !. The value may be either a scalar (a string), an integer, or an array. To assign a scalar or integer value to a parameter, use the typeset builtin. To assign an array value, use set -A name value .... The value of a parameter may also be assigned by writing: name=value ... If the integer attribute, -i, is set for name, the value is subject to arithmetic evaluation. The value of an array parameter may be assigned by writing: name=(value ...) ... Individual elements of an array may be selected using a sub- script. A subscript of the form [exp] selects the single element exp, where exp is an arithmetic expression which will be subject to arithmetic expansion as if it were sur- rounded by "$((...))". The elements are numbered beginning with 1 unless the KSH_ARRAYS option is set when they are numbered from zero. A subscript of the form [*] or [@] evaluates to all elements of an array; there is no difference between the two except when they appear within double quotes. "$foo[*]" evaluates to "$foo[1] $foo[2] ...", while "$foo[@]" evaluates to "$foo[1]" "$foo[2]", etc. A subscript of the form [exp1,exp2] selects all elements in the range exp1 to exp2, inclusive. If one of the subscripts evaluates to a negative number, say -n, then the nth element from the end of the array is used. Thus "$foo[-3]" is the third element from the end of the array foo, and "$foo[1,- 1]" is the same as "$foo[*]". Subscripting may also be performed on non-array values, in which case the subscripts specify a substring to be extracted. For example, if FOO is set to foobar, then echo $FOO[2,5] prints ooba. Subscripts may be used inside braces used to delimit a parameter name, thus ${foo[2]} is equivalent to $foo[2]. If the KSH_ARRAYS option is set, the braced form is the only one that will work, the subscript otherwise not being treated specially. If a subscript is used on the left side of an assignment the selected range is replaced by the expression on the right side. If the opening bracket or the comma is directly followed by an opening parentheses the string up to the matching closing one is considered to be a list of flags. The flags currently understood are: e this option has no effect and retained for back- ward compatibility only w if the parameter subscripted is a scalar than this flag makes subscription work on a per-word basis instead of characters s:string: this gives the string that separates words (for use with the w flag) p Recognize the same escape sequences as the print builtin in the string argument of a subsequent s flag. f if the parameter subscripted is a scalar than this flag makes subscription work on a per-line basis instead of characters. This is a shorthand for pws:\n:. r if this flag is given the exp is taken as a pat- tern and the result is the first matching array element, substring or word (if the parameter is an array, if it is a scalar, or if it is a scalar and the w flag is given, respectively); note that this is like giving a number: $foo[(r)??,3] and $foo[(r)??,(r)f*] work R like r, but gives the last match i like r, but gives the index of the match instead; this may not be combined with a second argument I like i, but gives the index of the last match n:expr: if combined with r, R, , or I, makes them give the n'th or n'th last match (if expr evaluates to n) Positional Parameters Positional parameters are set by the shell on invocation, by the set builtin, or by direct assignment. The parameter n, where n is a number, is the nth positional parameter. The parameters *, @, and argv are arrays containing all the positional parameters; thus argv[n], etc. is equivalent to simply n. Special Parameters The following parameters are automatically set by the shell: ! The process id of the last background command invoked. # The number of positional parameters in decimal. ARGC Same as #. It has no special meaning in sh/ksh compatibility mode. $ The process id of this shell. - Flags supplied to the shell on invocation or by the set or setopt commands. * An array containing the positional parameters. argv Same as *. It has no special meaning in sh/ksh compatibility mode. @ Same as argv[@] but it can be used in sh/ksh com- patibility mode. ? The exit value returned by the last command. status Same as ?. It has no special meaning in sh/ksh compatibility mode. _ The last argument of the previous command. Also, this parameter is set in the environment of every command executed to the full pathname of the com- mand. EGID The effective group id of the shell process. If you have sufficient privileges, you may change the effective group id of the shell process by assign- ing to this parameter. Also (assuming sufficient privileges), you may start a single command with a different effective group id by: (EGID=egid ; command) EUID The effective user id of the shell process. If you have sufficient privileges, you may change the effective user id of the shell process by assign- ing to this parameter. Also (assuming sufficient privileges), you may start a single command with a different effective user id by: (EUID=euid ; command) ERRNO The value of errno as set by the most recently failed system call. This value is system depen- dent and is intended for debugging purposes. GID The group id of the shell process. If you have sufficient privileges, you may change the group id of the shell process by assigning to this parame- ter. Also (assuming sufficient privileges), you may start a single command under a different group id by: (GID=gid ; command) HOST The current hostname. LINENO The line number of the current line within the current script being executed. LOGNAME If the corresponding variable is not set in the environment of the shell, it is initialized to the login name corresponding to the current login ses- sion. This parameter is exported by default but this can be disabled using the typeset builtin. MACHTYPE The machine type (microprocessor class or machine model), as determined at compile time. OLDPWD The previous working directory. OPTARG The value of the last option argument processed by the getopts command. OPTIND The index of the last option argument processed by the getopts command. OSTYPE The operating system, as determined at compile time. PPID The process id of the parent of the shell. PWD The present working directory. RANDOM A random integer from 0 to 32767, newly generated each time this parameter is referenced. The ran- dom number generator can be seeded by assigning a numeric value to RANDOM. SECONDS The number of seconds since shell invocation. If this parameter is assigned a value, then the value returned upon reference will be the value that was assigned plus the number of seconds since the assignment. SHLVL Incremented by one each time a new shell is started. signals An array containing the names of the signals. TTY The name of the tty associated with the shell, if any. TTYIDLE The idle time of the tty associated with the shell in seconds or -1 if there is no such tty. UID The user id of the shell process. If you have sufficient privileges, you may change the user id of the shell by assigning to this parameter. Also (assuming sufficient privileges), you may start a single command under a different user id by: (UID=uid ; command) USERNAME The username corresponding to the user id of the shell process. If you have sufficient privileges, you may change the username (and also the user id and group id) of the shell by assigning to this parameter. Also (assuming sufficient privileges), you may start a single command under a different username (and user id and group id) by: (USERNAME=username ; command) VENDOR The vendor, as determined at compile time. ZSHNAME Expands to the basename of the command used to invoke this instance of zsh. ZSH_NAME Expands to the basename of the command used to invoke this instance of zsh. ZSH_VERSION The version number of this zsh. The following parameters are used by the shell: ARGV0 If exported, it's value is used as argv[0] of external commands. Usually used in constructs like 'ARGV0=emacs nethack'. BAUD The baud rate of the current connection. Used by the line editor update mechanism to compensate for a slow terminal by delaying updates until neces- sary. This may be profitably set to a lower value in some circumstances, e.g. for slow modems dial- ing into a communications server which is con- nected to a host via a fast link; in this case, this variable would be set by default to the speed of the fast link, and not the modem. This parame- ter should be set to the baud rate of the slowest part of the link for best performance. The compen- sation mechanism can be turned off by setting the variable to zero. cdpath (CDPATH) An array (colon-separated list) of directories specifying the search path for the cd command. COLUMNS The number of columns for this terminal session. Used for printing select lists and for the line editor. DIRSTACKSIZE The maximum size of the directory stack. If the stack gets larger than this, it will be truncated automatically. This is useful with the AUTO_PUSHD option. FCEDIT The default editor for the fc builtin. fignore (FIGNORE) An array (colon separated list) containing the suffixes of files to be ignored during filename completion. However, if the completion generates only files which would match if this variable would be ignored, than these files are completed anyway. fpath (FPATH) An array (colon separated list) of directories specifying the search path for function defini- tions. This path is searched when a function with the -u attribute is referenced. If an executable file is found, then it is read and executed in the current environment. histchars Three characters used by the shell's history and lexical analysis mechanism. The first character signals the start of a history substitution (default `!'). The second character signals the start of a quick history substitution (default `^'). The third character is the comment charac- ter (default `#'). HISTCHARS Same as histchars. HISTFILE The file to save the history in when an interac- tive shell exits. If unset, the history is not saved. HISTSIZE The maximum size of the history list. HOME The default argument for the cd command. IFS Internal field separators, normally space, tab, and newline, that are used to separate words which result from command or parameter substitution and words read by the read builtin. Any characters from the set space, tab and newline that appear in the IFS are called IFS white space. One or more IFS white space characters or one non-IFS white space character together with any adjacent IFS white space character delimit a field. If an IFS white space character appears twice consecutively in the IFS, this character is treated as if it were not an IFS white space character. KEYTIMEOUT The time the shell waits, in hundredths of seconds, for another key to be pressed when read- ing bound multi-character sequences. LANG This variable determines the locale category for any category not specifically selected via a variable starting with LC_. LC_ALL This variable overrides the value of the LANG variable and the value of any of the other vari- ables starting with LC_. LC_COLLATE This variable determines the locale category for character collation information within ranges in glob brackets and for sorting. LC_CTYPE This variable determines the locale category for character handling functions. LC_MESSAGES This variable determines the language in which messages should be written. Note that zsh does not use message catalogs. LC_TIME This variable determines the locale category for date and time formatting in promt escape sequences. LINES The number of lines for this terminal session. Used for printing select lists and for the line editor. LISTMAX In the line editor, the number of filenames to list without asking first. If set to zero, the shell asks only if the top of the listing would scroll off the screen. LOGCHECK The interval in seconds between checks for login/logout activity using the watch parameter. MAIL If this parameter is set and mailpath is not set, the shell looks for mail in the specified file. MAILCHECK The interval in seconds between checks for new mail. mailpath (MAILPATH) An array (colon-separated list) of filenames to check for new mail. Each filename can be followed by a ? and a message that will be printed. The message will undergo parameter expansion, command substitution and arithmetic substitution with the variable $_ defined as the name of the file that has changed. The default message is "You have new mail." If an element is a directory instead of a file the shell will recursively check every file in every subdirectory of the element. manpath (MANPATH) An array (colon-separated list) whose value is not used by the shell. The manpath array can be use- ful, however, since setting it also sets MANPATH, and vice versa. NULLCMD The command name to assume if a redirection is specified with no command. Defaults to cat. For sh/ksh-like behavior, change this to :. For csh- like behavior, unset this parameter; the shell will print an error message if null commands are entered. path (PATH) An array (colon-separated list) of directories to search for commands. When this parameter is set, each directory is scanned and all files found are put in a hash table. POSTEDIT This string is output whenever the line editor exits. It usually contains termcap strings to reset the terminal. PS1 The primary prompt string, printed before a com- mand is read; the default is "%m%# ". If the escape sequence takes an optional integer, it should appear between the '%' and the next charac- ter of the sequence. The following escape sequences are recognized: %% A `%'. %) A `)'. %d %/ Present working directory ($PWD). %~ $PWD. If it has a named directory as its prefix, that part is replaced by a ~ followed by the name of the directory. If it starts with $HOME, that part is replaced by a ~. %c %. %C Trailing component of $PWD. An integer may follow the '%' to get more than one com- ponent. Unless %C is used, tilde expansion is performed first. %h %! Current history event number %M The full machine hostname. %m The hostname up to the first '.'. An integer may follow the '%' to specify how many com- ponents of the hostname are desired. %S (%s) Start (stop) standout mode. %U (%u) Start (stop) underline mode. %B (%b) Start (stop) boldface mode. %t %@ Current time of day, in 12-hour, am/pm format. %T Current time of day, in 24-hour format. %* Current time of day in 24-hour format, with seconds. %n $USERNAME. %w The date in day-dd format. %W The date in mm/dd/yy format. %D The date in yy-mm-dd format. %D{string} string is formatted using the strftime func- tion. See strftime(3) for more details, if your system has it. %l The line (tty) the user is logged in on. %? The return code of the last command executed just before the prompt. %_ The status of the parser, i.e. the shell con- structs (like `if' and `for') that have been started on the command line. If given an integer number that many strings will be printed; zero or no integer means print as many as there are. %E Clears to end of line. %# A '#' if the shell is running as root, a '%' if not. Equivalent to %(#.#.%%). %v The value of the first element of the $psvar array parameter. Following the '%' with an integer gives that element of the array. %{...%} Include a string as a literal escape sequence. The string within the braces should not change the cursor position. %(x.true-text.false-text) Specifies a ternary expression. The charac- ter following the x is arbitrary; the same character is used to separate the text for the "true" result from that for the "false" result. This separator may not appear in the true-text, except as part of a % sequence. A `)' may appear in the false-text as `%)'. True-text and false-text may both contain arbitrarily-nested escape sequences, includ- ing further ternary expressions. The left parenthesis may be preceded or followed by a positive integer n, which defaults to zero. The test character x may be any of the fol- lowing: c . ~ True if the current path, with prefix replacement, has at least n elements. / C True if the current absolute path has at least n elements. t True if the time in minutes is equal to n. T True if the time in hours is equal to n. d True if the day of the month is equal to n. D True if the month is equal to n (January = 0). w True if the day of the week is equal to n (Sunday = 0). ? True if the exit status of the last com- mand was n. # True if the effective uid of the current process is n. g True if the effective gid of the current process is n. L True if the SHLVL parameter is at least n. S True if the SECONDS parameter is at least n. v True if the array psvar has at least n elements. _ True if at least n shell constructs were started. %<string< %>string> %[xstring] Specifies truncation behaviour. The third form is equivalent to `%xstringx', i.e. x may be `<' or `>'. The numeric argument, which in the third form may appear immediately after the `[', specifies the maximum permit- ted length of the various strings that can be displayed in the prompt. If this integer is zero, or missing, truncation is disabled. Truncation is initially disabled. The forms with `<' truncate at the left of the string, and the forms with `>' truncate at the right of the string. For example, if the current directory is `/home/pike', the prompt `%8<..<%/' will expand to `..e/pike'. The string will be displayed in place of the truncated portion of any string. In this string, the terminating character (`<', `>' or `]'), or in fact any character, may be quoted by a preceding `\'. % sequences are not treated specially. If the string is longer than the specified truncation length, it will appear in full, completely replacing the truncated string. PS2 The secondary prompt, printed when the shell needs more information to complete a command. Recog- nizes the same escape sequences as $PS1. The default is "%_> ", which displays any shell con- structs or quotation marks which are currently being processed. PS3 Selection prompt used within a select loop. Recognizes the same escape sequences as $PS1. The default is "?# ". PS4 The execution trace prompt. Default is "+ ". PROMPT PROMPT2 PROMPT3 PROMPT4 Same as PS1, PS2, PS3, and PS4, respectively. These parameters do not have any special meaning in sh/ksh compatibility mode. psvar (PSVAR) An array (colon-separated list) whose first nine values can be used in PROMPT strings. Setting psvar also sets PSVAR, and vice versa. prompt Same as PS1. It has no special meaning in sh/ksh compatibility mode. READNULLCMD The command name to assume if a single input redirection is specified with no command. Defaults to more. REPORTTIME If nonnegative, commands whose combined user and system execution times (measured in seconds) are greater than this value have timing statistics printed for them. RPROMPT RPS1 This prompt is displayed on the right-hand side of the screen when the primary prompt is being displayed on the left. This does not work if the SINGLELINEZLE option is set. Recognizes the same escape sequences as PROMPT. SAVEHIST The maximum number of history events to save in the history file. SPROMPT The prompt used for spelling correction. The sequence %R expands to the string which presumably needs spelling correction, and %r expands to the proposed correction. All other PROMPT escapes are also allowed. STTY If this parameter is set in a command's environ- ment, the shell runs the stty command with the value of this parameter as arguments in order to set up the terminal before executing the command. The modes apply only to the command, and are reset when it finishes or is suspended. If the command is suspended and continued later with the fg or wait builtins it will see the modes specified by STTY, as if it were not suspended. This (inten- tionally) does not apply if the command is contin- ued via "kill -CONT". STTY is ignored if the com- mand is run in the background, or if it is in the environment of the shell but not explicitly assigned to in the input line. This avoids running stty at every external command by accidentally exporting it. Also note that STTY should not be used for window size specifications; these will not be local to the command. TIMEFMT The format of process time reports with the time keyword. The default is "%E real %U user %S system %P %J". Recognizes the following escape sequences: %% A `%'. %U CPU seconds spent in user mode. %S CPU seconds spent in kernel mode. %E Elapsed time in seconds. %P The CPU percentage, computed as (%U+%S)/%E. %J The name of this job. A star may be inserted between the percent sign and flags printing time. This cause the time to be printed in hh:mm:ss.ttt format (hours and minutes are only printed if they are not zero). TMOUT If this parameter is nonzero, the shell will receive an ALRM signal if a command is not entered within the specified number of seconds after issu- ing a prompt. If there is a trap on SIGALRM, it will be executed and a new alarm is scheduled using the value of the TMOUT parametr after exe- cecuting the trap. If no trap is set, and the idle time of the terminal is not less than the value of the TMOUT parameter, zsh terminates. Otherwise a new alarm is scheduled to TMOUT seconds after the last keypress. TMPPREFIX A pathname prefix which the shell will use for all temporary files. Note that this should include an initial part for the file name as well as any directory names. The default is /tmp/zsh. watch (WATCH) An array (colon-separated list) of login/logout events to report. If it contains the single word "all", then all login/logout events are reported. If it contains the single word "notme", then all events are reported as with "all" except $USER- NAME. An entry in this list may consist of a username, an `@' followed by a remote hostname, and a `%' followed by a line (tty). Any or all of these components may be present in an entry; if a login/logout event matches all of them, it is reported. WATCHFMT The format of login/logout reports if the watch parameter is set. Default is "%n has %a %l from %m." Recognizes the following escape sequences: %n The name of the user that logged in/out. %a The observed action, i.e. "logged on" or "logged off". %l The line (tty) the user is logged in on. %M The full hostname of the remote host. %m The hostname up to the first ".". If only the ip address is available or the utmp field contains the name of an X-windows display, the whole name is printed. NOTE: The %m and %M escapes will work only if there is a host name field in the utmp on your machine. Otherwise they are treated as ordi- nary strings. %S (%s) Start (stop) standout mode. %U (%u) Start (stop) underline mode. %B (%b) Start (stop) boldface mode. %t %@ The time, in 12-hour, am/pm format. %T The time, in 24-hour format. %w The date in day-dd format. %W The date in mm/dd/yy format. %D The date in yy-mm-dd format. %(x:true-text:false-text) Specifies a ternary expression. The charac- ter following the x is arbitrary; the same character is used to separate the text for the "true" result from that for the "false" result. Both the separator and the right parenthesis may be escaped with a backslash. Ternary expressions may be nested. The test character x may be any one of l, n, m, or M, which indicate a "true" result if the corresponding escape sequence would return a non-empty value; or may be a, which indicates a "true" result if the watched user has logged in, or "false" if he has logged out. Other characters evaluate to neither true nor false; the entire expression is omitted in this case. If the result is "true", then the true-text is formatted according to the rules above and printed, and the false-text is skipped. If "false", the true-text is skipped and the false-text is formatted and printed. Either or both of the branches may be empty, but both separators must be present in any case. WORDCHARS A list of nonalphanumeric characters considered part of a word by the line editor. ZDOTDIR The directory to search for shell startup files (.zshrc, etc), if not $HOME. NOTES Source for zsh is available in the SUNWzshS package. NAME zshzle - zsh command line editor DESCRIPTION If the ZLE option is set (it is by default) and the shell input is attached to the terminal, the user is allowed to edit command lines. There are two display modes. The first, multiline mode, is the default. It only works if the TERM parameter is set to a valid terminal type that can move the cursor up. The second, single line mode, is used if TERM is invalid or incapable of moving the cursor up, or if the SINGLE_LINE_ZLE option is set. This mode is similar to ksh, and uses no termcap sequences. If TERM is "emacs", the ZLE option will be unset by the shell. Bindings Command bindings may be set using the bindkey builtin. There are two keymaps-the main keymap and the alternate key- map. The alternate keymap is bound to vi command mode. The main keymap is bound to emacs mode by default. To bind the main keymap to vi insert mode, use bindkey -v. However, if one of the VISUAL or EDITOR environment variables contain the string vi when the shell starts up the main keymap will be bound to vi insert mode by default. The following is a list of all the key commands and their default bindings in emacs mode, vi command mode and vi insert mode. Movement vi-backward-blank-word (unbound) (B) (unbound) Move backward one word, where a word is defined as a series of non-blank characters. backward-char (^B ESC-[D) (unbound) (unbound) Move backward one character. vi-backward-char (unbound) (^H h ^?) (unbound) Move backward one character, without changing lines. backward-word (ESC-B ESC-b) (unbound) (unbound) Move to the beginning of the previous word. emacs-backward-word Move to the beginning of the previous word. vi-backward-word (unbound) (b) (unbound) Move to the beginning of the previous word, vi-style. beginning-of-line (^A) (unbound) (unbound) Move to the beginning of the line. If already at the beginning of the line, move to the beginning of the previous line, if any. vi-beginning-of-line Move to the beginning of the line, without changing lines. end-of-line (^E) (unbound) (unbound) Move to the end of the line. If already at the end of the line, move to the end of the next line, if any. vi-end-of-line (unbound) ($) (unbound) Move to the end of the line. If an argument is given to this command, the cursor will be moved to the end of the line (argument - 1) lines down. vi-forward-blank-word (unbound) (W) (unbound) Move forward one word, where a word is defined as a series of non-blank characters. vi-forward-blank-word-end (unbound) (E) (unbound) Move to the end of the current word, or, if at the end of the current word, to the end of the next word, where a word is defined as a series of non-blank characters. forward-char (^F ESC-[C) (unbound) (unbound) Move forward one character. vi-forward-char (unbound) (space l) (unbound) Move forward one character. vi-find-next-char (^X^F) (f) (unbound) Read a character from the keyboard, and move to the next occurrence of it in the line. vi-find-next-char-skip (unbound) (t) (unbound) Read a character from the keyboard, and move to the position just before the next occurrence of it in the line. vi-find-prev-char (unbound) (F) (unbound) Read a character from the keyboard, and move to the previous occurrence of it in the line. vi-find-prev-char-skip (unbound) (T) (unbound) Read a character from the keyboard, and move to the position just after the previous occurrence of it in the line. vi-first-non-blank (unbound) (^) (unbound) Move to the first non-blank character in the line. vi-forward-word (unbound) (w) (unbound) Move forward one word, vi-style. forward-word (ESC-F ESC-f) (unbound) (unbound) Move to the beginning of the next word. The editor's idea of a word is specified with the WORDCHARS parame- ter. emacs-forward-word Move to the end of the next word. vi-forward-word-end (unbound) (e) (unbound) Move to the end of the next word. vi-goto-column (ESC-|) (|) (unbound) Move to the column specified by the numeric argument. vi-goto-mark (unbound) (`) (unbound) Move to the specified mark. vi-goto-mark-line (unbound) (') (unbound) Move to beginning of the line containing the specified mark. vi-repeat-find (unbound) (;) (unbound) Repeat the last vi-find command. vi-rev-repeat-find (unbound) (,) (unbound) Repeat the last vi-find command in the opposite direc- tion. History beginning-of-buffer-or-history (ESC-<) (unbound) (unbound) Move to the beginning of the buffer, or if already there, move to the first event in the history list. beginning-of-line-hist Move to the beginning of the line. If already at the beginning of the buffer, move to the previous history line. beginning-of-history Move to the first event in the history list. down-line-or-history (^N ESC-[B) (j) (unbound) Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list. vi-down-line-or-history (unbound) (+) (unbound) Move down a line in the buffer, or if already at the bottom line, move to the next event in the history list. Then move to the first non-blank character on the line. down-line-or-search Move down a line in the buffer, or if already at the bottom line, search forward in the history for a line beginning with the first word in the buffer. down-history (unbound) (^N) (unbound) Move to the next event in the history list. history-beginning-search-backward Search backward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position. end-of-buffer-or-history (ESC->) (unbound) (unbound) Move to the end of the buffer, or if already there, move to the last event in the history list. end-of-line-hist Move to the end of the line. If already at the end of the buffer, move to the next history line. end-of-history Move to the last event in the history list. vi-fetch-history (unbound) (G) (unbound) Fetch the history line specified by the numeric argu- ment. This defaults to the current history line (i.e. the one that isn't history yet). history-incremental-search- backward (^R ^Xr) (unbound) (unbound) Search backward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line. A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will stop the search and go back to the original line. An undefined key will have the same effect. The sup- ported functions are: backward-delete-char, vi- backward-delete-char, clear-screen, redisplay, quoted- insert, vi-quoted-insert, accept-and-hold, accept-and- infer-next-history, accept-line and accept-line-and- down-history; magic-space just inserts a space. vi- cmd-mode toggles between the main and alternate key bindings; the main key bindings (insert mode) will be selected initially. Any string that is bound to an out-string (via bindkey -s) will behave as if out- string were typed directly. Typing the binding of history-incremental-search-backward will get the next occurrence of the contents of the mini-buffer. Typing the binding of history-incremental-search-forward inverts the sense of the search. vi-repeat-search and vi-rev-repeat-search are similarly supported. The direction of the search is indicated in the mini- buffer. Any multi-character string that is not bound to one of the above functions will beep and interrupt the search, leaving the last found line in the buffer. Any single character that is not bound to one of the above functions, or self-insert or self-insert-unmeta, will have the same effect but the function will be exe- cuted. history-incremental-search- forward (^S ^Xs) (unbound) (unbound) Search forward incrementally for a specified string. The search is case-insensitive if the search string does not have uppercase letters and no numeric argument was given. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for history-incremental-search-backward. history-search-backward (ESC-P ESC-p) (unbound) (unbound) Search backward in the history for a line beginning with the first word in the buffer. vi-history-search-backward (unbound) (/) (unbound) Search backward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will stop the search. The functions available in the mini-buffer are: accept-line, vi-cmd-mode (treated the same as accept-line), backward-delete-char, vi-backward- delete-char, backward-kill-word, vi-backward-kill-word, clear-screen, redisplay, magic-space (treated as a space), quoted-insert and vi-quoted-insert. Any string that is bound to an out-string (via bindkey -s) will behave as if out-string were typed directly. Any other character that is not bound to self-insert or self- insert-unmeta will beep and be ignored. If the function is called from vi command mode, the bindings of the current insert mode will be used. history-search-forward (ESC-N ESC-n) (unbound) (unbound) Search forward in the history for a line beginning with the first word in the buffer. vi-history-search-forward (unbound) (?) (unbound) Search forward in the history for a specified string. The string may begin with `^' to anchor the search to the beginning of the line. The functions available in the mini-buffer are the same as for vi-history-search- backward. infer-next-history (^X^N) (unbound) (unbound) Search in the history list for a line matching the current one and fetch the event following it. insert-last-word (ESC-_ ESC-.) (unbound) (unbound) Insert the last word from the previous history event at the cursor position. If a positive numeric argument is given, insert that word from the end of the previous history event. If the argument is zero or negative insert that word from the left (zero inserts the previ- ous command word). vi-repeat-search (unbound) (n) (unbound) Repeat the last vi history search. vi-rev-repeat-search (unbound) (N) (unbound) Repeat the last vi history search, but in reverse. up-line-or-history (^P ESC-[A) (k) (unbound) Move up a line in the buffer, or if already at the top line, move to the previous event in the history list. vi-up-line-or-history (unbound) (-) (unbound) Move up a line in the buffer, or if already at the top line, move to the previous event in the history list. Then move to the first non-blank character on the line. up-line-or-search Move up a line in the buffer, or if already at the top line, search backward in the history for a line begin- ning with the first word in the buffer. up-history (unbound) (^P) (unbound) Move to the previous event in the history list. history-beginning-search-forward Search forward in the history for a line beginning with the current line up to the cursor. This leaves the cursor in its original position. Modifying Text vi-add-eol (unbound) (A) (unbound) Move to the end of the line and enter insert mode. vi-add-next (unbound) (a) (unbound) Enter insert mode after the current cursor position, without changing lines. backward-delete-char (^H ^?) (unbound) (unbound) Delete the character behind the cursor. vi-backward-delete-char (unbound) (X) (^H) Delete the character behind the cursor, without chang- ing lines. If in insert mode, this won't delete past the point where insert mode was last entered. backward-delete-word Delete the word behind the cursor. backward-kill-line Kill from the beginning of the line to the cursor posi- tion. backward-kill-word (^W ESC-^H ESC-^?) (unbound) (unbound) Kill the word behind the cursor. vi-backward-kill-word (unbound) (unbound) (^W) Kill the word behind the cursor, without going past the point where insert mode was last entered. capitalize-word (ESC-C ESC-c) (unbound) (unbound) Capitalize the current word and move past it. vi-change (unbound) (c) (unbound) Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the move- ment. Then enter insert mode. If the command is vi- change, change the current line. vi-change-eol (unbound) (C) (unbound) Kill to the end of the line and enter insert mode. vi-change-whole-line (unbound) (S) (unbound) Kill the current line and enter insert mode. copy-region-as-kill (ESC-W ESC-w) (unbound) (unbound) Copy the area from the cursor to the mark to the kill buffer. copy-prev-word (ESC-^_) (unbound) (unbound) Duplicate the word behind the cursor. vi-delete (unbound) (d) (unbound) Read a movement command from the keyboard, and kill from the cursor position to the endpoint of the move- ment. If the command is vi-delete, kill the current line. delete-char Delete the character under the cursor. vi-delete-char (unbound) (x) (unbound) Delete the character under the cursor, without going past the end of the line. delete-word Delete the current word. down-case-word (ESC-L ESC-l) (unbound) (unbound) Convert the current word to all lowercase and move past it. kill-word (ESC-D ESC-d) (unbound) (unbound) Kill the current word. gosmacs-transpose-chars Exchange the two characters behind the cursor. vi-indent (unbound) (>) (unbound) Indent a number of lines. vi-insert (unbound) (i) (unbound) Enter insert mode. vi-insert-bol (unbound) (I) (unbound) Move to the first non-blank character on the line and enter insert mode. vi-join (^X^J) (J) (unbound) Join the current line with the next one. kill-line (^K) (unbound) (unbound) Kill from the cursor to the end of the line. If already on the end of the line, kill the newline char- acter. vi-kill-line (unbound) (unbound) (^U) Kill from the cursor back to wherever insert mode was last entered. vi-kill-eol (unbound) (D) (unbound) Kill from the cursor to the end of the line. kill-region Kill from the cursor to the mark. kill-buffer (^X^K) (unbound) (unbound) Kill the entire buffer. kill-whole-line (^U) (unbound) (unbound) Kill the current line. vi-match-bracket (^X^B) (%) (unbound) Move to the bracket character (one of {}, (), or []) that matches the one under the cursor. If the cursor is not on a bracket character, move forward without going past the end of the line to find one, and then go to the matching bracket. vi-open-line-above (unbound) (O) (unbound) Open a line above the cursor and enter insert mode. vi-open-line-below (unbound) (o) (unbound) Open a line below the cursor and enter insert mode. vi-oper-swap-case Read a movement command from the keyboard, and swap the case of all characters from the cursor position to the endpoint of the movement. If the movement command is vi-oper-swap-case, swap the case of all characters on the current line. overwrite-mode (^X^O) (unbound) (unbound) Toggle between overwrite mode and insert mode. vi-put-before (unbound) (P) (unbound) Insert the contents of the kill buffer before the cur- sor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it above the current line. vi-put-after (unbound) (p) (unbound) Insert the contents of the kill buffer after the cur- sor. If the kill buffer contains a sequence of lines (as opposed to characters), paste it below the current line. quoted-insert (^V) (unbound) (unbound) Insert the next character typed into the buffer literally. An interrupt character will not be inserted. vi-quoted-insert (unbound) (unbound) (^Q ^V) Display a `^' at the cursor position, and insert the next character typed into the buffer literally. An interrupt character will not be inserted. quote-line (ESC-') (unbound) (unbound) Quote the current line; that is, put a ' character at the beginning and the end, and convert all ' characters to '\''. quote-region (ESC-") (unbound) (unbound) Quote the region from the cursor to the mark. vi-replace (unbound) (R) (unbound) Enter overwrite mode. vi-repeat-change (unbound) (.) (unbound) Repeat the last vi mode text modification. If a count was used with the modification, it is remembered. If a count is given to this command, it overrides the remem- bered count, and is remembered for future uses of this command. The cut buffer specification is similarly remembered. vi-replace-chars (unbound) (r) (unbound) Replace the character under the cursor with a character read from the keyboard. ters and some control characters) self- insert (printable characters) (unbound) (printable charac- Put a character in the buffer at the cursor position. self-insert-unmeta (ESC-^I ESC-^J ESC- ^M) (unbound) (unbound) Put a character in the buffer after stripping the meta bit and converting ^M to ^J. vi-substitute (unbound) (s) (unbound) Substitute the next character(s). vi-swap-case (unbound) (~) (unbound) Swap the case of the character under the cursor and move past it. transpose-chars (^T) (unbound) (unbound) Exchange the two characters to the left of the cursor if at end of line, else exchange the character under the cursor with the character to the left. transpose-words (ESC-T ESC-t) (unbound) (unbound) Exchange the current word with the one before it. vi-unindent (unbound) (<) (unbound) Unindent a number of lines. up-case-word (ESC-U ESC-u) (unbound) (unbound) Convert the current word to all caps and move past it. yank (^Y) (unbound) (unbound) Insert the contents of the kill buffer at the cursor position. yank-pop (ESC-y) (unbound) (unbound) Remove the text just yanked, rotate the kill-ring, and yank the new top. Only works following yank or yank- pop. vi-yank (unbound) (y) (unbound) Read a movement command from the keyboard, and copy the region from the cursor position to the endpoint of the movement into the kill buffer. If the command is vi- yank, copy the current line. vi-yank-whole-line (unbound) (Y) (unbound) Copy the current line into the kill buffer. vi-yank-eol Copy the region from the cursor position to the end of the line into the kill buffer. Arguably, this is what Y should do in vi, but it isn't what it actually does. Arguments digit-argument (ESC-0..ESC-9) (1-9) (unbound) Start a new numeric argument, or add to the current one. See also vi-digit-or-beginning-of-line. neg-argument (ESC--) (unbound) (unbound) Changes the sign of the following argument. universal-argument Multiply the argument of the next command by 4. Completion accept-and-menu-complete In a menu completion, insert the current completion into the buffer, and advance to the next possible com- pletion. complete-word Attempt completion on the current word. delete-char-or-list (^D) (unbound) (unbound) Delete the character under the cursor. If the cursor is at the end of the line, list possible completions for the current word. expand-cmd-path Expand the current command to its full pathname. expand-or-complete (TAB) (unbound) (TAB) Attempt shell expansion on the current word. If that fails, attempt completion. expand-or-complete-prefix Attempt shell expansion on the current word upto cur- sor. expand-history (ESC-space ESC-!) (unbound) (unbound) Perform history expansion on the edit buffer. expand-word (^X*) (unbound) (unbound) Attempt shell expansion on the current word. list-choices (ESC-^D) (^D =) (^D) List possible completions for the current word. list-expand (^Xg ^XG) (^G) (^G) List the expansion of the current word. magic-space Perform history expansion and insert a space into the buffer. This is intended to be bound to space. menu-complete Like complete-word, except that menu completion is used. See the MENU_COMPLETE option below. menu-expand-or-complete Like expand-or-complete, except that menu completion is used. reverse-menu-complete See the MENU_COMPLETE option below. Miscellaneous accept-and-hold (ESC-A ESC-a) (unbound) (unbound) Push the contents of the buffer on the buffer stack and execute it. accept-and-infer-next-history Execute the contents of the buffer. Then search the history list for a line matching the current one and push the event following onto the buffer stack. accept-line (^J ^M) (^J ^M) (^J ^M) Execute the contents of the buffer. accept-line-and-down-history (^O) (unbound) (unbound) Execute the current line, and push the next history event on the the buffer stack. vi-cmd-mode (^X^V) (unbound) (^[) Enter command mode; that is, use the alternate keymap. Yes, this is bound by default in emacs mode. vi-caps-lock-panic Hang until any lowercase key is pressed. This is for vi users without the mental capacity to keep track of their caps lock key (like the author). clear-screen (^L ESC-^L) (^L) (^L) Clear the screen and redraw the prompt. describe-key-briefly Waits for a keypress then prints the function bound to the pressed key. exchange-point-and-mark (^X^X) (unbound) (unbound) Exchange the cursor position with the position of the mark. execute-named-cmd (ESC-x) (unbound) (unbound) Read the name of an editor command and execute it. A restricted set of editing functions is available in the mini-buffer. An interrupt signal, as defined by the stty setting, will abort the function. The allowed functions are: backward-delete-char, vi-backward- delete-char, clear-screen, redisplay, quoted-insert, vi-quoted-insert, kill-region (kills the last word), backward-kill-word, vi-backward-kill-word, kill-whole- line, vi-kill-line, backward-kill-line, list-choices, delete-char-or-list, complete-word, expand-or-complete, expand-or-complete-prefix, accept-line and vi-cmd-mode (treated the same as accept-line). The space and tab characters, if not bound to one of these functions, will complete the name and then list the possibilities if the AUTO_LIST option is set. Any string that is bound to an out-string (via bindkey -s) will behave as if out-string were typed directly. Any other character that is not bound to self-insert or self-insert-unmeta will beep and be ignored. If the function is called from vi command mode, the bindings of the current insert mode will be used. execute-last-named-cmd (ESC-z) (unbound) (unbound) Redo the last function executed with execute-named-cmd. get-line (ESC-G ESC-g) (unbound) (unbound) Pop the top line off the buffer stack and insert it at the cursor position. pound-insert (unbound) (#) (unbound) If there is no # character at the beginning of the buffer, add one to the beginning of each line. If there is one, remove a # from each line that has one. In either case, accept the current line. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness. vi-pound-insert If there is no # character at the beginning of the current line, add one. If there is one, remove it. The INTERACTIVE_COMMENTS option must be set for this to have any usefulness. push-input Push the entire current multiline construct onto the buffer stack and return to the top-level (PS1) prompt. If the current parser construct is only a single line, this is exactly like push-line. Next time the editor starts up or is popped with get-line, the construct will be popped off the top of the buffer stack and loaded into the editing buffer. push-line (^Q ESC-Q ESC-q) (unbound) (unbound) Push the current buffer onto the buffer stack and clear the buffer. Next time the editor starts up, the buffer will be popped off the top of the buffer stack and loaded into the editing buffer. push-line-or-edit At the top-level (PS1) prompt, equivalent to push-line. At a secondary (PS2) prompt, move the entire current multiline construct into the editor buffer. The latter is equivalent to push-input followed by get-line. redisplay (unbound) (^R) (^R) Redisplays the edit buffer. send-break (^G ESC-^G) (unbound) (unbound) Abort the current editor function, eg. execute-named- command, or the editor itself, eg. if you are in vared. Otherwise abort the parsing of the current line. run-help (ESC-H ESC-h) (unbound) (unbound) Push the buffer onto the buffer stack, and execute the command "run-help cmd", where cmd is the current com- mand. run-help is normally aliased to man. vi-set-buffer (unbound) (") (unbound) Specify a buffer to be used in the following command. There are 35 buffers that can be specified: the 26 `named' buffers "a to "z and the nine `queued' buffers "1 to "9. The named buffers can also be specified as "A to "Z. When a buffer is specified for a cut com- mand, the text being cut replaces the previous contents of the specified buffer. If a named buffer is speci- fied using a capital, the newly cut text is appended to the buffer instead of overwriting it. If no buffer is specified for a cut command, "1 is used, and the con- tents of "1 to "8 are each shifted along one buffer; the contents of "9 is lost. vi-set-mark (unbound) (m) (unbound) Set the specified mark at the cursor position. set-mark-command (^@) (unbound) (unbound) Set the mark at the cursor position. spell-word (ESC-$ ESC-S ESC-s) (unbound) (unbound) Attempt spelling correction on the current word. undefined-key (lots o' keys) (lots o' keys) (unbound) Beep. undo (^_ ^Xu ^X^U) (unbound) (unbound) Incrementally undo the last text modification. vi-undo-change (unbound) (u) (unbound) Undo the last text modification. If repeated, redo the modification. where-is Read the name of an editor command and and print the listing of key sequences that invoke the specified com- mand. which-command (ESC-?) (unbound) (unbound) Push the buffer onto the buffer stack, and execute the command "which-command cmd", where cmd is the current command. which-command is normally aliased to whence. vi-digit-or-beginning-of-line (unbound) (0) (unbound) If the last command executed was a digit as part of an argument, continue the argument. Otherwise, execute vi-beginning-of-line. NOTES Source for zsh is available in the SUNWzshS package. NAME zshoptions - zsh options SPECIFYING OPTIONS Options are primarily referred to by name. These names are case insensitive and underscores are ignored. For example, "allexport" is equivalent to "A__lleXP_ort". The sense of an option name may be inverted by preceding it with "no", so "setopt No_Beep" is equivalent to "setopt beep". This inversion can only be done once, so "nonobeep" is not a synonym for "beep". Similarly, "tify" is not a synonym for "nonotify" (the inversion of "notify"). Some options also have one or more single letter names. There are two sets of single letter options: one used by default, and another when the shell is emulating sh or ksh. The single letter options can be used on the shell command line, or with the set, setopt and unsetopt builtins, as nor- mal Unix options preceded by -. The sense of the single letter options may be inverted by using + instead of -. Some of the single letter option names refer to an option being off, in which case the inver- sion of that name refers to the option being on. For exam- ple, "+n" is the short name of "exec", and "-n" is the short name of its inversion, "noexec". DESCRIPTIONS ALL_EXPORT (-a, ksh: -a) All parameters subsequently defined are automati- cally exported. ALWAYS_LAST_PROMPT If unset, key functions that list completions try to return to the last prompt if given a numeric argument. If set these functions try to return to the last prompt if given no numeric argument. ALWAYS_TO_END If a completion with the cursor in the word was started and it results in only one match, the cur- sor is placed at the end of the word. APPEND_HISTORY If this is set, zsh sessions will append their history list to the history file, rather than overwrite it. Thus, multiple parallel zsh sessions will all have their history lists added to the history file, in the order they are killed. AUTO_CD (-J) If a command is not in the hash table, and there exists an executable directory by that name, per- form the cd command to that directory. AUTO_LIST (-9) Automatically list choices on an ambiguous comple- tion. AUTO_MENU Automatically use menu completion after the second consecutive request for completion, for example by pressing the TAB key repeatedly. This option is overridden by MENU_COMPLETE. AUTO_NAME_DIRS Any parameter that is set to the absolute name of a directory immediately becomes a name for that directory in the usual form ~param. If this option is not set, the parameter must be used in that form for it to become a name (a command-line completion is sufficient for this). AUTO_PARAM_KEYS If a parameter name was completed and the next character typed is one of those that have to come directly after the name (like `}', `:', etc.) they are placed there automatically. AUTO_PARAM_SLASH If a parameter is completed whose content is the name of a directory, then add a trailing slash. AUTO_PUSHD (-N) Make cd push the old directory onto the directory stack. AUTO_REMOVE_SLASH When the last character resulting from a comple- tion is a slash and the next character typed is a word delimiter, remove the slash. AUTO_RESUME (-W) Treat single word simple commands without redirec- tion as candidates for resumption of an existing job. BAD_PATTERN (+2) If a pattern for filename generation is badly formed, print an error. If this option is unset, the pattern will be left unchanged. BANG_HIST (+K) Perform textual history substitution, treating the character ! specially. BEEP (+B) Beep. BG_NICE (-6) Run all background jobs at a lower priority. This option is set by default. BRACE_CCL Expand expressions in braces which would not oth- erwise undergo brace expansion to a lexically ordered list of all the characters. See the sec- tion BRACE EXPANSION in the zshexpn manual page. BSD_ECHO Make the echo builtin compatible with the BSD echo(1) command. This disables backslashed escape sequences in echo strings unless the -e option is specified. CDABLE_VARS (-T) If the argument to a cd command (or an implied cd with the AUTO_CD option set) is not a directory, and does not begin with a slash, try to expand the expression as if it were preceded by a ~ (see Filename Expansion above). CHASE_LINKS (-w) Resolve symbolic links to their true values. CLOBBER (+C, ksh: +C) Allows > redirection to truncate existing files, and >> to create files. Otherwise >! must be used to truncate a file, and >>! to create a file. COMPLETE_ALIASES If set, aliases on the command line are not inter- nally substituted before completion is attempted. COMPLETE_IN_WORD If unset, the cursor is set to the end of the word if completion is started. Otherwise it stays there and completion is done from both ends. CORRECT (-0) Try to correct the spelling of commands. CORRECT_ALL (-O) Try to correct the spelling of all arguments in a line. CSH_JUNKIE_HISTORY A history reference without an event specifier will always refer to the previous command. CSH_JUNKIE_LOOPS Allow loop bodies to take the form "list; end" instead of "do list; done". CSH_JUNKIE_QUOTES Complain if a quoted expression runs off the end of a line; prevent quoted expressions from con- taining unescaped newlines. CSH_NULL_GLOB If a pattern for filename generation has no matches, delete the pattern from the argument list; do not report an error unless all the pat- terns in a command have no matches. Overrides NULL_GLOB. EQUALS Perform = filename substitution. ERR_EXIT (-e, ksh: -e) If a command has a non-zero exit status, execute the ZERR trap, if set, and exit. This is disabled while running initialization scripts. EXEC (+n, ksh: +n) Do execute commands. Without this option, com- mands are read and checked for syntax errors, but not executed. EXTENDED_GLOB Treat the #, ~ and ^ characters as part of pat- terns for filename generation, etc. (An initial unquoted ~ always produces named directory expan- sion as in Filename Expansion above.) EXTENDED_HISTORY Save beginning and ending timestamps to the his- tory file. The format of these timestamps is :<beginning time>:<ending time>:<command>. FLOW_CONTROL If this option is unset, output flow control via start/stop characters (usually assigned to ^S/^Q) is disabled in the shell's editor. FUNCTION_ARGZERO When executing a shell function or sourcing a script, set $0 temporarily to the name of the function/script. GLOB (+F, ksh: +f) Perform filename generation. GLOB_ASSIGN If this option is set, filename generation (glob- bing) is performed on the right hand side of scalar parameter assignments of the form name=pattern (e.g. `param=*'). If the result has more than one word the parameter will become an array with those words as arguments. This option is provided for backwards compatibility only: globbing is always performed on the right hand side of array assignments of the form `name=( value )' (e.g. `param=(*)') and this form is recommended for clarity; with this option set, it is not possible to predict whether the result will be an array or a scalar. GLOB_COMPLETE When the current word has a glob pattern, do not insert all the words resulting from the expansion but cycle through them like MENU_COMPLETE. If no matches are found, a `*' is added to the end of the word or inserted at the cursor if COMPLETE_IN_WORD is set, and expansion is attempted again. Using patterns works not only for files but for all completions, such as options, user names, etc. GLOB_DOTS (-4) Do not require a leading . in a filename to be matched explicitly. GLOB_SUBST Treat any characters resulting from parameter sub- stitution as being eligible for file expansion and filename generation, and any characters resulting from command substitution as being eligible for filename generation. HASH_CMDS Place the location of each command in the hash table the first time it is executed. If this option is unset, no path hashing will be done at all. HASH_DIRS Whenever a command is executed, hash the directory containing it, as well as all directories that occur earlier in the path. Has no effect if HASH_CMDS is unset. HASH_LIST_ALL Whenever a command completion is attempted, make sure the entire command path is hashed first. This makes the first completion slower. HIST_ALLOW_CLOBBER Add `|' to output redirections in the history. This allows history references to clobber files even when CLOBBER is unset. HIST_BEEP Beep when an attempt is made to access a history entry which isn't there. HIST_IGNORE_DUPS (-h) Do not enter command lines into the history list if they are duplicates of the previous event. HIST_IGNORE_SPACE (-g) Do not enter command lines into the history list if any command on the line begins with a blank. HIST_NO_STORE Remove the history (fc -l) command from the his- tory when invoked. HIST_REDUCE_BLANKS Remove superfluous whitespace from each command line being added to the history list. HIST_VERIFY Whenever the user enters a line with history sub- stitution, don't execute the line directly; instead, perform history substitution and reload the line into the editing buffer. HUP Send the HUP signal to running jobs when the shell exits. IGNORE_BRACES (-I) Do not perform brace expansion. IGNORE_EOF (-7) Do not exit on end-of-file. Require the use of exit or logout instead. INTERACTIVE (-i, ksh: -i) This is an interactive shell. This option is set upon initialisation if the standard input is a tty and commands are being read from standard input. (See the discussion of SHIN_STDIN.) This heuris- tic may be overridden by specifying a state for this option on the command line. The value of this option cannot be changed anywhere other than the command line. INTERACTIVE_COMMENTS (-k) Allow comments even in interactive shells. KSH_ARRAYS Emulate ksh array handling as closely as possible. If this option is set, array elements are numbered from zero, an array parameter without subscript refers to the first element instead of the whole array, and braces are required to delimit a sub- script (``${path[2]}'' rather than just ``$path[2]''). KSH_OPTION_PRINT Alters the way options settings are printed. LIST_AMBIGUOUS If this option is set, completions are shown only if the completions don't have a unambiguous prefix or suffix that could be inserted in the command line. LIST_BEEP Beep on an ambiguous completion. LIST_TYPES (-X) When listing files that are possible completions, show the type of each file with a trailing identi- fying mark. LOCAL_OPTIONS If this option is set at the point of return from a shell function, all the options (including this one) which were in force upon entry to the func- tion are restored. Otherwise, only this option and the XTRACE and PRINT_EXIT_VALUE options are restored. Hence if this is explicitly unset by a shell function the other options in force at the point of return will remain so. LOGIN (-l, ksh: -l) This is a login shell. LONG_LIST_JOBS (-R) List jobs in the long format by default. MAGIC_EQUAL_SUBST All unquoted arguments of the form identifier=expression appearing after the command name have filename expansion (that is, where expression has a leading `~' or `=') performed on expression as if it were a parameter assignment. The argument is not otherwise treated specially: in other words, it is subsequently treated as a single word, not as an assignment. MAIL_WARNING (-U) Print a warning message if a mail file has been accessed since the shell last checked. MARK_DIRS (-8, ksh: -X) Append a trailing / to all directory names result- ing from filename generation (globbing). MENU_COMPLETE (-Y) On an ambiguous completion, instead of listing possibilities or beeping, insert the first match immediately. Then when completion is requested again, remove the first match and insert the second match, etc. When there are no more matches, go back to the first one again. reverse-menu-complete may be used to loop through the list in the other direction. This option over- rides AUTO_MENU. MONITOR (-m, ksh: -m) Allow job control. Set by default in interactive shells. MULTIOS Perform implicit tees or cats when multiple redirections are attempted (see the REDIRECTION section). NOMATCH (+3) If a pattern for filename generation has no matches, print an error, instead of leaving it unchanged in the argument list. This also applies to file expansion of an initial ~ or =. NOTIFY (-5, ksh: -b) Report the status of background jobs immediately, rather than waiting until just before printing a prompt. NULL_GLOB (-G) If a pattern for filename generation has no matches, delete the pattern from the argument list instead of reporting an error. Overrides NOMATCH. NUMERIC_GLOB_SORT If numeric filenames are matched by a filename generation pattern, sort the filenames numerically rather than lexicographically. OVER_STRIKE Start up the line editor in overstrike mode. PATH_DIRS (-Q) Perform a path search even on command names with slashes in them. Thus if "/usr/local/bin" is in the user's path, and he types "X11/xinit", the command "/usr/local/bin/X11/xinit" will be exe- cuted (assuming it exists). This applies to the . builtin as well as to command execution. Commands explicitly beginning with "./" or "../" are not subject to path search. POSIX_BUILTINS When this option is set the command builtin can be used to execute shell builtin commands. Parameter assignments specified before shell functions and special builtins are kept after the command com- pletes unless the special builtin is prefixed with the command builtin. Special builtins are ., :, break, continue, declare, eval, exit, export, integer, local, readonly, return, set, shift, source, times, trap and unset. PRINT_EIGHT_BIT Print eight bit characters literally in completion lists, etc. This option is not necessary if your system correctly returns the printability of eight bit characters (see ctype(3)). PRINT_EXIT_VALUE (-1) Print the exit value of programs with non-zero exit status. PRIVILEGED (-p, ksh: -p) Turn on privileged mode. This is enabled automati- cally on startup if the effective user (group) id is not equal to the real user (group) id. Turning this option off causes the effective user and group ids to be set to the real user and group ids. This option disables sourcing user startup files. If zsh is invoked as sh or ksh with this option set, /etc/suid_profile is sourced (after /etc/profile on interactive shells). Sourcing ~/.profile is disabled and the contents of the ENV variable is ignored. This option cannot be changed using the -m option of setopt and unsetopt and changing it inside a function always changes it globally regardless of the LOCAL_OPTIONS option. PROMPT_CR (+V) Print a carriage return just before printing a prompt in the line editor. PROMPT_SUBST If set, parameter expansion, command substitution and arithmetic expansion is performed in prompts. PUSHD_IGNORE_DUPS Don't push multiple copies of the same directory onto the directory stack. PUSHD_MINUS See popd below. PUSHD_SILENT (-E) Do not print the directory stack after pushd or popd. PUSHD_TO_HOME (-D) Have pushd with no arguments act like pushd $HOME. RC_EXPAND_PARAM (-P) Array expansions of the form foo${xx}bar, where the parameter xx is set to (a b c), are substi- tuted with fooabar foobbar foocbar instead of the default fooa b cbar. RC_QUOTES Allow the character sequence '' to signify a sin- gle quote within singly quoted strings. RCS (+f) After /etc/zshenv is sourced on startup, source the /etc/zshrc, .zshrc, /etc/zlogin, .zlogin, and .zlogout files, as described in STARTUP/SHUTDOWN FILES. If this option is unset, only the /etc/zshenv file is sourced. REC_EXACT (-S) In completion, recognize exact matches even if they are ambiguous. RM_STAR_SILENT (-H) Do not query the user before executing "rm *" or "rm path/*". SH_FILE_EXPANSION Perform filename expansion (e.g., ~ expansion) before parateter expansion, command substitution, arithmetic expansion and brace expansion. If this option is unset, it is performed after brace expansion, so things like ``~$USERNAME'' ``~{pfalstad,rc}'' will work. SH_GLOB Disables the special meaning of `(', `|', `)' and '<' for globbing the result of parameter and com- mand substitutions, and in some other places where the shell accepts patterns. This option is set if zsh is invoked as sh or ksh. SHIN_STDIN (-s, ksh: -s) Commands are being read from the standard input. Commands are read from standard input if no com- mand is specified with -c and no file of commands is specified. If SHIN_STDIN is set explicitly on the command line, any argument that would other- wise have been taken as a file to run will instead be treated as a normal positional parameter. Note that setting or unsetting this option on the com- mand line does not necessarily affect the state the option will have while the shell is running - that is purely an indicator of whether on not com- mands are actually being read from standard input. The value of this option cannot be changed any- where other than the command line. SH_OPTION_LETTERS If this option is set the shell tries to interpret single letter options (which are used with set and setopt) like ksh does. This also affects the value of the - special parameter. SHORT_LOOPS Allow the short forms of for, select, if, and function constructs. SH_WORD_SPLIT (-y) See Parameter Expansion. SINGLE_COMMAND (-t, ksh: -t) If the shell is reading from standard input, it exits after a single command has been executed. This also makes the shell non-interactive, unless the INTERACTIVE option is explicitly set on the command line. The value of this option cannot be changed anywhere other than the command line. SINGLE_LINE_ZLE (-M) Use single-line command line editing instead of multi-line. SUN_KEYBOARD_HACK (-L) If a line ends with a backquote, and there are an odd number of backquotes on the line, ignore the trailing backquote. This is useful on some key- boards where the return key is too small, and the backquote key lies annoyingly close to it. UNSET (+u, ksh: +u) Treat unset parameters as if they were empty when substituting. Otherwise they are treated as an error. VERBOSE (-v, ksh: -v) Print shell input lines as they are read. XTRACE (-x, ksh: -x) Print commands and their arguments as they are executed. ZLE (-Z) Use the zsh line editor. SINGLE LETTER OPTIONS Default set: -0 CORRECT -1 PRINT_EXIT_VALUE +2 BAD_PATTERN +3 NOMATCH -4 GLOB_DOTS -5 NOTIFY -6 BG_NICE -7 IGNORE_EOF -8 MARK_DIRS -9 AUTO_LIST +B BEEP +C CLOBBER -D PUSHD_TO_HOME -E PUSHD_SILENT +F GLOB -G NULL_GLOB -H RM_STAR_SILENT -I IGNORE_BRACES -J AUTO_CD +K BANG_HIST -L SUN_KEYBOARD_HACK -M SINGLE_LINE_ZLE -N AUTO_PUSHD -O CORRECT_ALL -P RC_EXPAND_PARAM -Q PATH_DIRS -R LONG_LIST_JOBS -S REC_EXACT -T CDABLE_VARS -U MAIL_WARNING +V PROMPT_CR -W AUTO_RESUME -X LIST_TYPES -Y MENU_COMPLETE -Z ZLE -a ALL_EXPORT -e ERR_EXIT +f RCS -g HIST_IGNORE_SPACE -h HIST_IGNORE_DUPS -i INTERACTIVE -k INTERACTIVE_COMMENTS -l LOGIN -m MONITOR +n EXEC -p PRIVILEGED -s SHIN_STDIN -t SINGLE_COMMAND +u UNSET -v VERBOSE -w CHASE_LINKS -x XTRACE -y SH_WORD_SPLIT sh/ksh emulation set: +C CLOBBER -X MARK_DIRS -a ALL_EXPORT -b NOTIFY -e ERR_EXIT +f GLOB -i INTERACTIVE -l LOGIN -m MONITOR +n EXEC -p PRIVILEGED -s SHIN_STDIN -t SINGLE_COMMAND +u UNSET -v VERBOSE -x XTRACE Also note: -A Used by set for setting arrays -c Used on the command line to specify a single command -m Used by setopt for pattern-matching option setting -o Used in all places to allow use of long option names Note that the use of -m in setopt and unsetopt, allowing the specification of option names by glob patterns, clashes with the use of -m for setting the MONITOR option. NOTES Source for zsh is available in the SUNWzshS package. INVOCATION OPTIONS If the -s flag is not present and an argument is given, the first argument is taken to be the pathname of a script to execute. The remaining arguments are assigned to the posi- tional parameters. The following flags are interpreted by the shell when invoked: -c string Read commands from string. -i Force shell to be interactive. -s Read command from the standard input. STARTUP/SHUTDOWN FILES Commands are first read from /etc/zshenv. If the RCS option is unset within /etc/zshenv, all other initialization files are skipped. Otherwise, commands are read from $ZDOTDIR/.zshenv. (If ZDOTDIR is unset, HOME is used instead). If the first character of argument zero passed to the shell is -, or if the -l flag is present, then the shell is assumed to be a login shell, and commands are read from /etc/zprofile and then $ZDOTDIR/.zprofile. Then, if the shell is interactive, commands are read from /etc/zshrc and then $ZDOTDIR/.zshrc. Finally, if the shell is a login shell, /etc/zloginfP and $ZDOTDIR/.zlogin are read. FILES $ZDOTDIR/.zshenv $ZDOTDIR/.zprofile $ZDOTDIR/.zshrc $ZDOTDIR/.zlogin $ZDOTDIR/.zlogout ${TMPPREFIX}* (default is /tmp/zsh*) /etc/zshenv /etc/zprofile /etc/zshrc /etc/zlogin /etc/zlogout AUTHOR Zsh was originally written by Paul Falstad <[email protected]>. Zsh is now maintained by the members of the zsh workers mailing list [email protected]. The development is currently coordinated by Zoltan Hidvegi <[email protected]>. SEE ALSO sh(1), csh(1), tcsh(1), bash(1), ksh(1). IEEE Standard for information Technology - Portable Operat- ing System Interface (POSIX) - Part 2: Shell and Utilities, IEEE Inc, 1993, ISBN 1-55937-255-9. NOTES Source for zsh is available in the SUNWzshS package.
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |