Партнёры:
Хостинг:
config_macros - Default configuration: /usr/lib/rpm/macros #
# # $Id: macros.in,v 1.6 2002/04/05 08:18:40 ldv Exp $ # # This is a global RPM configuration file. All changes made here will # be lost when the rpm package is upgraded. Any per-system configuration # should be added to /etc/rpm/macros, while per-user configuration should # be added to ~/.rpmmacros. # #============================================================================== # Macro naming conventions (preliminary): # # Macros that begin with an underscore are 'local' in the sense that # they (if used) will not be exported in rpm headers. Some macros # that don't start with an underscore (but look like they should) # are compatible with macros generated by rpm-2.5.x and will be made # more consistent in a future release. # #============================================================================== # ---- A macro that expands to nothing. # %nil %{!?nil} #============================================================================== # ---- filesystem macros. # %_usr /usr %_usrsrc %{_usr}/src %_var /var #============================================================================== # ---- Generally useful path macros. # %__awk gawk %__bzip2 /bin/bzip2 %__cat /bin/cat %__chgrp /bin/chgrp %__chmod /bin/chmod %__chown /bin/chown %__cp /bin/cp %__cpio /bin/cpio %__file /usr/bin/file %__gpg /usr/bin/gpg %__grep /bin/grep %__gzip /bin/gzip %__id /usr/bin/id %__install /bin/install %__install_info /sbin/install-info %__ln_s ln -s %__make /usr/bin/make %__mkdir /bin/mkdir %__mkdir_p /bin/mkdir -p %__mv /bin/mv %__patch /usr/bin/patch %__perl /usr/bin/perl %__pgp /usr/bin/pgp %__python /usr/bin/python %__rm /bin/rm %__rsh /usr/bin/rsh %__sed /bin/sed %__ssh /usr/bin/ssh %__tar /bin/tar %__unzip /usr/bin/unzip #============================================================================== # ---- Build system path macros. # %__ar ar %__as as %__cc gcc %__cpp gcc -E %__cxx c++ %__ld /usr/bin/ld %__nm /usr/bin/nm %__objcopy /usr/bin/objcopy %__objdump /usr/bin/objdump %__ranlib ranlib %__remsh %{__rsh} %__strip /usr/bin/strip # XXX avoid failures if tools are not installed when rpm is built. %__libtoolize libtoolize %__aclocal aclocal %__autoheader autoheader %__automake automake %__autoconf autoconf #============================================================================== # ---- Required rpmrc macros. # Macros that used to be initialized as a side effect of rpmrc parsing. # These are the default values that can be overridden by other # (e.g. per-platform, per-system, per-packager, per-package) macros. # # The directory where sources/patches will be unpacked and built. %_builddir %{_topdir}/BUILD # The interpreter used for build scriptlets. %_buildshell /bin/sh # The path to the bzip2 executable (legacy, use %{__bzip2} instead). %_bzip2bin %{__bzip2} # The location of the rpm database file(s). %_dbpath %{_var}/lib/rpm # The location of the rpm database file(s) after 'rpm --rebuilddb'. %_dbpath_rebuild %{_dbpath} %_defaultdocdir %{_datadir}/doc # %__find_provides /usr/lib/rpm/find-provides %__find_requires /usr/lib/rpm/find-requires #%__find_prereq ??? #%__find_conflicts ??? #%__find_obsoletes ??? # # fixowner, fixgroup, and fixperms are run at the end of hardcoded setup # These macros are necessary only for legacy compatibility, and have moved # to per-platform macro configuration (i.e. /usr/lib/rpm/<arch>-<os>/macros) #%__id_u %{__id} -u #%__chown_Rhf %{__chown} -Rhf #%__chgrp_Rhf %{__chgrp} -Rhf #%_fixowner [ `%{__id_u}` = '0' ] && %{__chown_Rhf} root #%_fixgroup [ `%{__id_u}` = '0' ] && %{__chgrp_Rhf} root #%_fixperms %{__chmod} -Rf a+rX,g-w,o-w # # The path to the gzip executable (legacy, use %{__gzip} instead). %_gzipbin %{__gzip} # The number of changelog entries kept when installing (legacy, unused in # rpm-4.0.1 and later). %_instchangelog 5 # The path to the pgp executable (legacy, use %{__pgp} instead). %_pgpbin %{__pgp} # The directory where newly built binary packages will be written. %_rpmdir %{_topdir}/RPMS # A template used to generate the output binary package file name # (legacy). %_rpmfilename %{_build_name_fmt} # The default signature type. %_signature gpg # The directory where sources/patches from a source package will be # installed. This is also where sources/patches are found when building. %_sourcedir %{_topsrcdir}/SOURCES # The directory where the spec file from a source package will be # installed. %_specdir %{_topsrcdir}/SPECS # The directory where newly built source packages will be written. %_srcrpmdir %{_topdir}/SRPMS # Directory where temporaray files can be created. %_tmppath %{_var}/tmp # Path to top of build area. %_topdir %{_usrsrc}/RPM # Path to top of spec/source/patch area. %_topsrcdir %{_topdir} # The path to the unzip executable (legacy, use %{__unzip} instead). %_unzipbin %{__unzip} #============================================================================== # ---- Optional rpmrc macros. # Macros that are initialized as a side effect of rpmrc and/or spec # file parsing. # # Configurable build root path, same as BuildRoot: in a specfile. # (Note: the configured macro value will override the spec file value). # %buildroot %{_tmppath}/%{name}-buildroot # The sub-directory (relative to %{_builddir}) where sources are compiled. # This macro is set after processing %setup, either explicitly from the # value given to -n or the default name-version. # #%buildsubdir # Configurable distribution information, same as Distribution: tag in a # specfile. # #%distribution # Configurable distribution URL, same as DistURL: tag in a specfile. # The URL will be used to supply reliable information to tools like # rpmfind. # # Note: You should not configure with disturl (or build packages with # the DistURL: tag) unless you are willing to supply content in a # yet-to-be-determined format at the URL specified. # #%disturl # Boolean (i.e. 1 == 'yes', 0 == 'no') that controls whether files # marked as %doc should be installed. #%_excludedocs # The port and machine name of a FTP proxy host running TIS firewall. # #%_ftpport #%_ftpproxy # The signature to use and the location of configuration files for # signing packages with GNU gpg. # #%_gpg_name #%_gpg_path # The port and machine name of an HTTP proxy host. # #%_httpport #%_httpproxy # The PATH put into the environment before running %pre/%post et al. # %_install_script_path /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin # A colon separated list of desired locales to be installed; # 'all' means install all locale specific files. # %_install_langs all # # Deprecated. # #%_langpatt # A colon separated list of paths where files should *not* be installed. # Usually, these are network file system mount points. # #%_netsharedpath # (experimental) # The type of pattern match used on rpmdb iterator selectors: # 'default' simple glob-like regex, periods will be escaped, # splats will have period prepended, full '^...$' match # required. Also, file path tags will use glob(7). # 'strcmp' compare strings # 'regex' regex(7) patterns using regcomp(3)/regexec(3) # 'glob' glob(7) patterns using fnmatch(3) # %_query_selector_match default # Configurable packager information, same as Packager: in a specfile. # #%packager # Compression type and level for source/binary package payloads. # 'w9.gzdio' gzip level 9 (default). # 'w9.bzdio' bzip2 level 9. # #%_source_payload w9.gzdio #%_binary_payload w9.gzdio # The signature to use and the location of configuration files for # signing packages with PGP. # #%_pgp_name #%_pgp_path # Configurable virtual provides (unimplemented, use Provides: ... # in an rpmrc file). # #%_provides # Deprecated. # #%_timecheck # Configurable vendor information, same as Vendor: in a specfile. # #%vendor #============================================================================== # ---- Package version macro. # The type of package to produce, for compatibility with legacy # versions of rpm. # # This is an rpm version, e.g. 30005 means to produce packaging compatible # with rpm-3.0.5. At the moment, values < 30005 (i.e. compatibility with # version before rpm-3.0.5) are not supported. The only incompatible change # in rpm packaging since rpm-3.0.5 has been to replace a 3 with a 4 in the # rpmlead, so there's little need to use any value greater than 30005. # %_package_version 30005 #============================================================================== # ---- Database configuration macros. # Macros used to configure Berkley db parameters. # # rpmdb macro configuration values are a colon (or white space) separated # list of tokens, with an optional '!' negation to explicitly disable bit # values, or a '=value' if a parameter. A per-tag value is used (e.g. # %_dbi_config_Packages) if defined, otherwise a per-rpmdb default # (e.g. %_dbi_config). The configuration is also conditioned on the # existence of an internal %{_rpmdb_rebuild} switch to permit changing # the configuration while rebuilding an rpmdb database. # # The rpmdb configuration tokens are in a popt table in rpmdb/dbconfig.c, # see that for the latest gory details. Note carefully that, unless you # are writing an rpm installer, you shouldn't have to touch *any* of these # parameters. # # Here's a short list of the tokens, with a guess of whether the option is # useful: # (nothing) currently used in rpm, known to work. # '+++' under development, will be supported in rpm eventually. # '???' I have no clue, you're mostly on your own. # # If you do find yourself inclined to fiddle, here's what I see (shrug): # 1) Only the value of mp_size has any serious impact on overall performance, # and you will need ~256Kb to handle a typical machine install. # 2) Only the Packages hash, because of the size of the values (i.e. headers), # will ever need tuning. Diddle the pagesize if you're interested, although # I believe that you will find pagesize=512 'best'. # 3) Adding nofsync increases speed, but risks total data loss. Fiddle shared # and/or mp_size instead. # 4) btree is faster than hash, but would require some painful rpm release # engineering to convert everbody's databases to btree, not gonna happen # soon. # # See the db3-devel package, or http://www.sleepycat.com for Berkeley db-3.x # documentation. # # token works? Berkeley db flag or value #================================================== #---------------------- DBENV->open parameters and tunable values: # mp_mmapsize=8Mb DBENV->set_mp_mmapsize # mp_size=512Kb DBENV->set_cachesize #---------------------- DBENV->open and DB->open common bits: # create DB_CREATE # thread ??? DB_THREAD (useless w/o posix mutexes on linux) #---------------------- DBENV->open bits: # joinenv DB_JOIN_ENV # mpool DB_INIT_MPOOL # cdb +++ DB_INIT_CDB # txn ??? DB_INIT_TXN # log ??? DB_INIT_LOG # lock ??? DB_INIT_LOCK # recover ??? DB_RECOVER # recover_fatal ??? DB_RECOVER_FATAL # use_environ ??? DB_USE_ENVIRON # use_environ_root ??? DB_USE_ENVIRON_ROOT # private +++ DB_PRIVATE # lockdown ??? DB_LOCKDOWN # shared +++ DB_SYSTEM_MEM #---------------------- DB->open parameters and tunable values: # cachesize=512Kb +++ DB->set_cachesize (meaningless if mp_size is used) # pagesize=512 +++ DB->set_pagesize #---------------------- DB->open bits: # excl ??? DB_EXCL # nommap ??? DB_NOMMAP # rdonly DB_RDONLY #---------------------- DB->open types: # btree DB_BTREE # hash DB_HASH # recno ??? DB_RECNO # queue ??? DB_QUEUE # unknown +++ DB_UNKNOWN #---------------------- DB->set_flags bits: # bt_dup +++ (btree only) DB_DUP # bt_dupsort +++ (btree only) DB_DUPSORT # ht_dup +++ (hash only) DB_DUP # ht_dupsort +++ (hash only) DB_DUPSORT #----------------------- rpmdb specific configuration: # usecursors (always on) Use db3 cursors in get/put/del ? # usedbenv (always on) Use db3 environment? # verify (always on, db3 only) Verify db after close? # lockdbfd (always on for Packages) Use fcntl(2) locking ? # nofsync Disable fsync(2) call performed after db3 writes? # temporary Unlink file when closing. # # XXX Use a CDB database model for concurrent access (under development, # cursor teardown with signals needs work, much more besides.) #%__dbi_other usedbenv create joinenv cdb mpool # mp_mmapsize=8Mb mp_size=512Kb verify # XXX Use transactions and logs for rpmdb durability (no clue yet): #%__dbi_other usedbenv create joinenv mpool txn log # mp_mmapsize=8Mb mp_size=512Kb verify # XXX enable at your own risk, CDB access to rpmdb isn't cooked yet. #%__dbi_cdb create joinenv cdb mpool # XXX The 'traditional' rpmdb shared/exclusive fcntl(2) lock on Packages model: %__dbi_other verify %{?_tmppath:tmpdir=%{_tmppath}} %{?__dbi_cdb} # Note: adding nofsync here speeds up --rebuilddb a lot. %__dbi_rebuild nofsync !log !txn !cdb %__dbi_transient %{__dbi_rebuild} temporary private %__dbi_perms perms=0644 # #--- Hash database configuration %__dbi_htconfig hash %{__dbi_other} %{__dbi_perms}%{nil} %__dbi_htconfig_current %{__dbi_htconfig} %__dbi_htconfig_rebuild %{__dbi_htconfig} %{__dbi_rebuild} %_dbi_htconfig %{?_rpmdb_rebuild:%{__dbi_htconfig_rebuild}} %{!?_rpmdb_rebuild:%{__dbi_htconfig_current}}%{nil} # #--- Btree database configuration %__dbi_btconfig btree %{__dbi_other} %{__dbi_perms}%{nil} %__dbi_btconfig_current %{__dbi_btconfig} %__dbi_btconfig_rebuild %{__dbi_btconfig} %{__dbi_rebuild} %_dbi_btconfig %{?_rpmdb_rebuild:%{__dbi_btconfig_rebuild}} %{!?_rpmdb_rebuild:%{__dbi_btconfig_current}}%{nil} # The list of tags for which indices will be built. %_dbi_tags Packages:Name:Basenames:Group:Requirename:Providename:Conflictname:Triggername:Dirnames:Requireversion:Provideversion:Installtid:Sigmd5:Sha1header:Filemd5s:Depends # 'Packages' should have shared/exclusive fcntl(2) lock using 'lockdbfd'. %_dbi_config_Packages %{_dbi_htconfig} lockdbfd # 'Depends' is a per-transaction cache of known dependency resolutions. %_dbi_config_Depends %{_dbi_htconfig} temporary private %_dbi_config_Dirnames %{_dbi_btconfig} %_dbi_config_Requireversion %{_dbi_btconfig} %_dbi_config_Provideversion %{_dbi_btconfig} %_dbi_config_Installtid %{_dbi_btconfig} %_dbi_config_Removetid %{_dbi_btconfig} # XXX legacy configuration. # Choose db interface: # 3 native db3 interface. # # There are two macros so that --rebuilddb can convert db1 -> db3. # %_dbapi 3 %_dbapi_rebuild 3 %_dbi_config %{_dbi_htconfig} #============================================================================== # ---- GPG/PGP/PGP5 signature macros. # Macro(s) to hold the arguments passed to GPG/PGP for package # signing and verification. # %__gpg_check_password_cmd %{__gpg} gpg --batch --no-verbose --passphrase-fd 3 -u '%{_gpg_name}' -so - %__pgp_check_password_cmd %{__pgp} pgp +batchmode=on +verbose=0 '%{_pgp_name}' -sf %__pgp5_check_password_cmd %{__pgp} pgps +batchmode=on +verbose=0 +armor=off '%{_pgp_name}' -f %__gpg_sign_cmd %{__gpg} gpg --batch --no-verbose --no-armor --passphrase-fd 3 -u '%{_gpg_name}' -sbo %{__signature_filename} %{__plaintext_filename} %__pgp_sign_cmd %{__pgp} pgp +batchmode=on +verbose=0 +armor=off '+myname=%{_pgp_name}' -sb %{__plaintext_filename} %{__signature_filename} %__pgp5_sign_cmd %{__pgp} pgps +batchmode=on +verbose=0 +armor=off '+myname=%{_pgp_name}' -b %{__plaintext_filename} -o %{__signature_filename} %__gpg_verify_cmd %{__gpg} gpg --batch --no-verbose --verify %{__signature_filename} %{__plaintext_filename} %__pgp_verify_cmd %{__pgp} pgp +batchmode=on +verbose=0 %{__signature_filename} %{__plaintext_filename} %__pgp5_verify_cmd %{__pgp} pgpv +batchmode=on +verbose=0 +OutputInformationFD=1 +OutputWarningFD=1 -o %{__signature_filename} %{__plaintext_filename} #============================================================================== # ---- Transaction macros. # Macro(s) used to parameterize transactions. # # The output binary package file name template used when building # binary packages. # # XXX Note: escaped %% for use in headerSprintf() %_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm # The output binary package file name template used when repackaging # erased packages. # # XXX Note: escaped %% for use in headerSprintf() %_repackage_name_fmt %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm # The directory in which erased packages will be saved when using # the --repackage option. %_repackage_dir /var/spool/up2date %_repackage_root %{nil} # Relations between package names that cause dependency loops # with legacy packages that cannot be fixed. Relations are # specified as # p>q # where package p has a Requires: on something that package q Provides: # # XXX Note: that there cannot be any whitespace within the string 'p>q', # and that both p and q are package names (i.e. no version/release). # #%_dependency_whiteout_5_2 # pam>pamconfig #%_dependency_whiteout_6_1 # pilot-link-devel>pilot-link #%_dependency_whiteout_6_2 # egcs-c++>libstdc++ #%_dependency_whiteout_7_0 # pango-gtkbeta-devel>pango-gtkbeta# XFree86>Mesa # compat-glibc>db2 # compat-glibc>db1 # pam>initscripts # initscripts>sysklogd #%_dependency_whiteout_7_1 # arts>kdelibs-sound #%_dependency_whiteout_7_2 # libgnomeprint15>gnome-print # nautilus>nautilus-mozilla # tcl>postgresql-tcl # #%_dependency_whiteout # libtermcap>bash # modutils>vixie-cron # ypbind>yp-tools # ghostscript-fonts>ghostscript # %{?_dependency_whiteout_7_2} # %{?_dependency_whiteout_7_1} # %{?_dependency_whiteout_7_0} # %{?_dependency_whiteout_6_2} # %{?_dependency_whiteout_6_1} # %{?_dependency_whiteout_5_2} # %{nil} #============================================================================== # ---- per-platform macros. # Macros that are specific to an individual platform. The values here # will be used if the per-platform macro file does not exist.. # %_arch i386 %_build_arch i386 %_vendor alt %_os linux %_gnu -gnu %_target_platform %{_target_cpu}-%{_vendor}-%{_target_os}%{?_gnu} # # Define a generic value for optflags. Normally overridden by per-target macros. %optflags -O2 # # Define per-arch and per-os defaults. Normally overridden by per-target macros. %__arch_install_post %{nil} %__os_install_post %{___build_post} #============================================================================== # ---- Scriptlet template templates. # Global defaults used for building scriptlet templates. # %___build_shell %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh} %___build_args -e %___build_cmd %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args} %___build_pre export RPM_SOURCE_DIR='%{u2p:%{_sourcedir}}' export RPM_BUILD_DIR='%{u2p:%{_builddir}}' export RPM_OPT_FLAGS='%{optflags}' export RPM_ARCH='%{_arch}' export RPM_OS='%{_os}' export RPM_DOC_DIR='%{_docdir}' export RPM_PACKAGE_NAME='%{name}' export RPM_PACKAGE_VERSION='%{version}' export RPM_PACKAGE_RELEASE='%{release}' %{?buildroot:export RPM_BUILD_ROOT='%{u2p:%{buildroot}}'} %{?_compress_method:export RPM_COMPRESS_METHOD='%{_compress_method}'} %{?_strip_method:export RPM_STRIP_METHOD='%{_strip_method}'} %{?_findreq_method:export RPM_FINDREQ_METHOD='%{_findreq_method}'} %{?_findprov_method:export RPM_FINDPROV_METHOD='%{_findprov_method}'} %{?_findreq_default_method:export RPM_FINDREQ_DEFAULT_METHOD='%{_findreq_default_method}'} %{?_findprov_default_method:export RPM_FINDPROV_DEFAULT_METHOD='%{_findprov_default_method}'} %{?_perl_lib_path:export RPM_PERL_LIB_PATH='%{_perl_lib_path}'} %{?__python:export RPM_PYTHON='%{__python}'} unset LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION LC_ALL ||: %{?_build_lang:export LANG='%{_build_lang}' export LANGUAGE='%{_build_lang}' export LC_ALL='%{_build_lang}'} %{verbose:set -x}%{!verbose:exec > /dev/null} umask 022 cd %{u2p:%{_builddir}} #%___build_body %{nil} %___build_post exit 0 %___build_template #!%{___build_shell}%{___build_pre}%{nil} #%{___build_body}#%{___build_post}#%{nil} #============================================================================== # ---- Scriptlet templates. # Macro(s) that expand to a command and script that is executed. # CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer. # %__spec_prep_shell %{___build_shell} %__spec_prep_args %{___build_args} %__spec_prep_cmd %{___build_cmd} %__spec_prep_pre %{___build_pre} %__spec_prep_body %{___build_body} %__spec_prep_post %{___build_post} %__spec_prep_template #!%{__spec_prep_shell}%{__spec_prep_pre}%{nil} #%{__spec_prep_body}#%{__spec_prep_post}#%{nil} %__spec_build_shell %{___build_shell} %__spec_build_args %{___build_args} %__spec_build_cmd %{___build_cmd} %__spec_build_pre %{___build_pre} %__spec_build_body %{___build_body} %__spec_build_post %{___build_post} %__spec_build_template #!%{__spec_build_shell}%{__spec_build_pre}%{nil} #%{__spec_build_body}#%{__spec_build_post}#%{nil} %__spec_install_shell %{___build_shell} %__spec_install_args %{___build_args} %__spec_install_cmd %{___build_cmd} %__spec_install_pre %{___build_pre} %__spec_install_body %{___build_body} %__spec_install_post%{__arch_install_post}%{__os_install_post}%{nil} %__spec_install_template #!%{__spec_install_shell}%{__spec_install_pre}%{nil} #%{__spec_install_body}#%{__spec_install_post}#%{nil} #%__spec_autodep_shell %{___build_shell} #%__spec_autodep_args %{___build_args} #%__spec_autodep_cmd %{___build_cmd} #%__spec_autodep_pre %{___build_pre} #%__spec_autodep_body %{___build_body} #%__spec_autodep_post %{___build_post} #%__spec_autodep_template #!%{__spec_autodep_shell}#%{__spec_autodep_pre}#%{nil} #%{__spec_autodep_body}#%{__spec_autodep_post}#%{nil} %__spec_clean_shell %{___build_shell} %__spec_clean_args %{___build_args} %__spec_clean_cmd %{___build_cmd} %__spec_clean_pre %{___build_pre} %__spec_clean_body %{___build_body} %__spec_clean_post %{___build_post} %__spec_clean_template #!%{__spec_clean_shell}%{__spec_clean_pre}%{nil} #%{__spec_clean_body}#%{__spec_clean_post}#%{nil} %__spec_rmbuild_shell %{___build_shell} %__spec_rmbuild_args %{___build_args} %__spec_rmbuild_cmd %{___build_cmd} %__spec_rmbuild_pre %{___build_pre} %__spec_rmbuild_body %{___build_body} %__spec_rmbuild_post %{___build_post} %__spec_rmbuild_template #!%{__spec_rmbuild_shell}%{__spec_rmbuild_pre}%{nil} #%{__spec_rmbuild_body}#%{__spec_rmbuild_post}#%{nil} # XXX We don't expand pre/post install scriptlets (yet). #%__spec_pre_pre %{nil} #%__spec_pre_post %{nil} #%__spec_post_pre %{nil} #%__spec_post_post %{nil} #%__spec_preun_pre %{nil} #%__spec_preun_post %{nil} #%__spec_postun_pre %{nil} #%__spec_postun_post %{nil} #%__spec_triggerpostun_pre %{nil} #%__spec_triggerpostun_post %{nil} #%__spec_triggerun_pre %{nil} #%__spec_triggerun_post %{nil} #%__spec_triggerin_pre %{nil} #%__spec_triggerin_post %{nil} #============================================================================== # ---- configure macros. # Macro(s) slavishly copied from autoconf's config.status. # %_prefix /usr %_exec_prefix %{_prefix} %_bindir %{_exec_prefix}/bin %_sbindir %{_exec_prefix}/sbin %_libexecdir %{_exec_prefix}/lib %_datadir %{_prefix}/share %_sysconfdir /etc %_sharedstatedir %{_prefix}/com %_localstatedir %{_var}/lib %_lib lib %_libdir %{_exec_prefix}/%{_lib} %_includedir %{_prefix}/include %_oldincludedir /usr/include %_infodir %{_datadir}/info %_mandir %{_datadir}/man #============================================================================== # ---- config.guess platform macros. # Macro(s) similar to the tokens used by configure. # %_build %{_host} %_build_alias %{_host_alias} %_build_cpu %{_host_cpu} %_build_vendor %{_host_vendor} %_build_os %{_host_os} %_host i586-alt-linux-gnu %_host_alias i586-alt-linux%{nil} %_host_cpu i586 %_host_vendor alt %_host_os linux-gnu %_target %{_host} %_target_alias %{_host_alias} %_target_cpu %{_host_cpu} %_target_vendor %{_host_vendor} %_target_os %{_host_os} #============================================================================== # ---- specfile macros. # Macro(s) here can be used reliably for reproducible builds. # (Note: Above is the goal, below are the macros under development) # # The configure macro does the following: # optionally change to a subdirectory (not implemented). # attempt to update config.guess and config.sub. # run configure with correct prefix, platform, and CFLAGS. # optionally restore current directory (not implemented). # The configure macro should be invoked as %configure (rather than %{configure}) # because the rest of the arguments will be expanded using %*. # # This is the version of %configure used through rpm-3.0.4. #%configure # %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force} # CFLAGS='%{optflags}' ./configure %{_target_platform} --prefix=%{_prefix} # #------------------------------------------------------------------------------ %_configure_script ./configure %_configure_target %{?_gnu: --host=%{_host} --target=%{_target_platform}} %{!?_gnu: %{_target_platform}} %_configure_gettext --without-included-gettext # This is an improved version of %configure (from PLD team). %configure CFLAGS='${CFLAGS:-%optflags}' ; export CFLAGS ; CXXFLAGS='${CXXFLAGS:-%optflags}' ; export CXXFLAGS ; FFLAGS='${FFLAGS:-%optflags}' ; export FFLAGS ; %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force ;} ./configure \ %{_configure_script} %{?_configure_target:%{_configure_target}} \ --prefix=%{_prefix} \ --exec-prefix=%{_exec_prefix} \ --bindir=%{_bindir} \ --sbindir=%{_sbindir} \ --sysconfdir=%{_sysconfdir} \ --datadir=%{_datadir} \ --includedir=%{_includedir} \ --libdir=%{_libdir} \ --libexecdir=%{_libexecdir} \ --localstatedir=%{_localstatedir} \ --sharedstatedir=%{_sharedstatedir} \ --mandir=%{_mandir} \ --infodir=%{_infodir} \ %{?_configure_gettext:%{_configure_gettext}} #------------------------------------------------------------------------------ # The make install analogue of %configure: %_makeinstall_target install %makeinstall %{__make} INSTALL='%__install -p' \ prefix=%{?buildroot:%{buildroot}}%{_prefix} \ exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \ bindir=%{?buildroot:%{buildroot}}%{_bindir} \ sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \ sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \ datadir=%{?buildroot:%{buildroot}}%{_datadir} \ includedir=%{?buildroot:%{buildroot}}%{_includedir} \ libdir=%{?buildroot:%{buildroot}}%{_libdir} \ libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \ localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \ sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \ mandir=%{?buildroot:%{buildroot}}%{_mandir} \ infodir=%{?buildroot:%{buildroot}}%{_infodir} \ %{?_makeinstall_target:%{_makeinstall_target}} #------------------------------------------------------------------------------ # The GNUconfigure macro does the following: # update config.guess and config.sub. # regenerate all autoconf/automake files # optionally change to a directory (make the directory if requested). # run configure with correct prefix, platform, and CFLAGS. # optionally restore current directory. # # Based on autogen.sh from GNOME and orginal GNUconfigure # %GNUconfigure(MCs:) CFLAGS='${CFLAGS:-%optflags}' ; export CFLAGS; LDFLAGS='${LDFLAGS:-%{-s:-s}}' ; export LDFLAGS; %{-C:_mydir='`pwd`'; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}} dirs='`find ${_mydir} -name configure.in -print`'; export dirs; for coin in `echo ${dirs}` do dr=`dirname ${coin}`; if test -f ${dr}/NO-AUTO-GEN; then : else macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(.*)),1,gp' < ${coin}`; ( cd ${dr}; aclocalinclude='${ACLOCAL_FLAGS}'; for k in ${macrodirs}; do if test -d ${k}; then aclocalinclude='${aclocalinclude} -I ${k}'; ##else ## echo '**Warning**: No such directory `${k}'. Ignored.' fi done if grep '^AM_GNU_GETTEXT' configure.in >/dev/null; then if grep 'sed.*POTFILES' configure.in >/dev/null; then : do nothing -- we still have an old unmodified configure.in else test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4; echo 'no' | gettextize --force --copy; test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4; fi fi if grep '^AM_PROG_LIBTOOL' configure.in >/dev/null; then %{__libtoolize} --force --copy; fi aclocal ${aclocalinclude}; if grep '^AM_CONFIG_HEADER' configure.in >/dev/null; then %{__autoheader}; fi echo 'Running automake --gnu ${am_opt} ...'; %{__automake} --add-missing --gnu ${am_opt}; %{__autoconf}; ); fi done %{-C:${_mydir}}%{!-C:.}/configure %{_target_platform} --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ; %{-C:cd ${_mydir}; unset _mydir} #------------------------------------------------------------------------------ # Useful perl macros (from Artur Frysiak <[email protected]>) # # For example, these can be used as (from ImageMagick.spec from PLD site) # [...] # BuildPrereq: perl # [...] # %package perl # Summary: libraries and modules for access to ImageMagick from perl # Group: Development/Languages/Perl # Requires: %{name} = %{version} # %requires_eq perl # [...] # %install # rm -fr $RPM_BUILD_ROOT # install -d $RPM_BUILD_ROOT/%{perl_sitearch} # [...] # %files perl # %defattr(644,root,root,755) # %{perl_sitearch}/Image # %dir %{perl_sitearch}/auto/Image # %requires_eq() %(LC_ALL='C' echo '%*' | xargs -r rpm -q --qf 'Requires: %%{name} = %%{epoch}:%%{version}\n' | sed -e 's/ (none):/ /' -e 's/ 0:/ /' | fgrep -v 'is not') %perl_archlib %(eval '`perl -V:installarchlib`'; echo '$installarchlib') %perl_sitelib %(eval '`perl -V:installsitelib`'; echo '$installsitelib') %perl_sitearch %(eval '`perl -V:installsitearch`'; echo '$installsitearch') %perl_man1dir %(eval '`perl -V:installman1dir`'; echo '$installman1dir') %perl_man3dir %(eval '`perl -V:installman3dir`'; echo '$installman3dir') #------------------------------------------------------------------------------ # arch macro for all Intel i?86 compatibile processors # (Note: This macro (and it's analogues) will probably be obsoleted when # rpm can use regular expressions against target platforms in macro # conditionals. # %intel i386 i486 i586 i686 i786 i886 i986 %amd k6 athlon %ix86 %intel %amd #------------------------------------------------------------------------ # Use in %install to generate locale specific file lists. For example, # # %install # ... # %find_lang %{name} # ... # %files -f %{name}.lang # %find_lang /usr/lib/rpm/find-lang #
#
Index
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |