Партнёры:
Хостинг:
overload - Package for overloading Perl operations
package SomeThing;
use overload
'+' => \&myadd,
'-' => \&mysub;
# etc
...
package main;
$a = new SomeThing 57;
$b=5+$a;
...
if (overload::Overloaded $b) {...}
...
$strval = overload::StrVal $b;
package Number;
use overload
"+" => \&add,
"*=" => "muas";
declares function Number::add() for addition, and method muas() in the ``class'' "Number" (or one of its base classes) for the assignment form "*=" of multiplication.
Arguments of this directive come in (key, value) pairs. Legal values are values legal inside a "&{ ... }" call, so the name of a subroutine, a reference to a subroutine, or an anonymous subroutine will all work. Note that values specified as strings are interpreted as methods, not subroutines. Legal keys are listed below.
The subroutine "add" will be called to execute "$a+$b" if $a is a reference to an object blessed into the package "Number", or if $a is not an object from a package with defined mathemagic addition, but $b is a reference to a "Number". It can also be called in other situations, like "$a+=7", or "$a++". See ``MAGIC AUTOGENERATION''. (Mathemagical methods refer to methods triggered by an overloaded mathematical operator.)
Since overloading respects inheritance via the @ISA hierarchy, the above declaration would also trigger overloading of "+" and "*=" in all the packages which inherit from "Number".
sub incr { my $n = $ {$_[0]}; ++$n; $_[0] = bless \$n}
is an appropriate implementation of overloaded "++". Note that
sub incr { ++$ {$_[0]} ; shift }
is OK if used with preincrement and with postincrement. (In the case of postincrement a copying will be performed, see ``Copy Constructor''.)
This allows for the same method to be used as overloaded "+=" and "+". Note that this is allowed, but not recommended, since by the semantic of ``Fallback'' Perl will call the method for "+" anyway, if "+=" is not overloaded.
Warning. Due to the presence of assignment versions of operations, routines which may be called in assignment context may create self-referential structures. Currently Perl will not free self-referential structures until cycles are "explicitly" broken. You may get problems when traversing your structures too.
Say,
use overload '+' => sub { bless [ \$_[0], \$_[1] ] };
is asking for trouble, since for code "$obj += $foo" the subroutine is called as "$obj = add($obj, $foo, undef)", or "$obj = [\$obj, \$foo]". If using such a subroutine is an important optimization, one can overload "+=" explicitly by a non-``optimized'' version, or switch to non-optimized version if "not defined $_[2]" (see ``Calling Conventions for Binary Operations'').
Even if no explicit assignment-variants of operators are present in the script, they may be generated by the optimizer. Say, ",$obj," or ',' . $obj . ',' may be both optimized to
my $tmp = ',' . $obj; $tmp .= ',';
"+", "+=", "-", "-=", "*", "*=", "/", "/=", "%", "%=",
"**", "**=", "<<", "<<=", ">>", ">>=", "x", "x=", ".", ".=",
For these operations a substituted non-assignment variant can be called if the assignment variant is not available. Methods for operations "+", "-", "+=", and "-=" can be called to automatically generate increment and decrement methods. The operation "-" can be used to autogenerate missing methods for unary minus or "abs".
See ``MAGIC AUTOGENERATION'', ``Calling Conventions for Mutators'' and ``Calling Conventions for Binary Operations'') for details of these substitutions.
"<", "<=", ">", ">=", "==", "!=", "<=>",
"lt", "le", "gt", "ge", "eq", "ne", "cmp",
If the corresponding ``spaceship'' variant is available, it can be used to substitute for the missing operation. During "sort"ing arrays, "cmp" is used to compare values subject to "use overload".
"&", "^", "|", "neg", "!", "~",
"neg" stands for unary minus. If the method for "neg" is not specified, it can be autogenerated using the method for subtraction. If the method for "!" is not specified, it can be autogenerated using the methods for "bool", or "", or "0+".
"++", "--",
If undefined, addition and subtraction methods can be used instead. These operations are called both in prefix and postfix form.
"atan2", "cos", "sin", "exp", "abs", "log", "sqrt", "int"
If "abs" is unavailable, it can be autogenerated using methods for "<`` or ''<=>" combined with either unary minus or subtraction.
Note that traditionally the Perl function int rounds to 0, thus for floating-point-like types one should follow the same semantic. If "int" is unavailable, it can be autogenerated using the overloading of "0+".
'bool', '""', '0+',
If one or two of these operations are not overloaded, the remaining ones can be used instead. "bool" is used in the flow control operators (like "while") and for the ternary "?:" operation. These functions can return any arbitrary Perl value. If the corresponding operation for this value is overloaded too, that operation will be called again with this value.
As a special case if the overload returns the object itself then it will be used directly. An overloaded conversion returning the object is probably a bug, because you're likely to get something that looks like "YourPackage=HASH(0x8172b34)".
"<>"
If not overloaded, the argument will be converted to a filehandle or glob (which may require a stringification). The same overloading happens both for the read-filehandle syntax "<$var>" and globbing syntax "<${var}>".
BUGS Even in list context, the iterator is currently called only once and with scalar context.
'${}', '@{}', '%{}', '&{}', '*{}'.
If not overloaded, the argument will be dereferenced as is, thus should be of correct type. These functions should return a reference of correct type, or another object with overloaded dereferencing.
As a special case if the overload returns the object itself then it will be used directly (provided it is the correct type).
The dereference operators must be specified explicitly they will not be passed to ``nomethod''.
"nomethod", "fallback", "=",
see "SPECIAL SYMBOLS FOR "use overload"".
See ``Fallback'' for an explanation of when a missing method can be autogenerated.
A computer-readable form of the above table is available in the hash %overload::ops, with values being space-separated lists of names:
with_assign => '+ - * / % ** << >> x .',
assign => '+= -= *= /= %= **= <<= >>= x= .=',
num_comparison => '< <= > >= == !=',
'3way_comparison'=> '<=> cmp',
str_comparison => 'lt le gt ge eq ne',
binary => '& | ^',
unary => 'neg ! ~',
mutators => '++ --',
func => 'atan2 cos sin exp abs log sqrt',
conversion => 'bool "" 0+',
iterators => '<>',
dereferencing => '${} @{} %{} &{} *{}',
special => 'nomethod fallback ='
use overload key => value;
is a string, it is interpreted as a method name.
If "A" inherits from "B" and "C" (in this order), "B" overloads "+" with "\&D::plus_sub", and "C" overloads "+" by "plus_meth", then the subroutine "D::plus_sub" will be called to implement operation "+" for an object in package "A".
Note that since the value of the "fallback" key is not a subroutine, its inheritance is not governed by the above rules. In the current implementation, the value of "fallback" in the first overloaded ancestor is used, but this is accidental and subject to change.
&nomethodMethod($a,1,1,"-")
if the pair "nomethod" => "nomethodMethod" was specified in the "use overload" directive.
The "nomethod" mechanism is not used for the dereference operators ( ${} @{} %{} &{} *{} ).
If some operation cannot be resolved, and there is no function assigned to "nomethod", then an exception will be raised via die()-- unless "fallback" was specified as a key in "use overload" directive.
Note. "fallback" inheritance via @ISA is not carved in stone yet, see ``Inheritance and overloading''.
This operation is called in the situations when a mutator is applied to a reference that shares its object with some other reference, such as
$a=$b;
++$a;
To make this change $a and not change $b, a copy of $$a is made, and $a is assigned a reference to this new object. This operation is done during execution of the "++$a", and not during the assignment, (so before the increment $$a coincides with $$b). This is only done if "++" is expressed via a method for '++' or '+=' (or "nomethod"). Note that if this operation is expressed via '+' a nonmutator, i.e., as in
$a=$b;
$a=$a+1;
then $a does not reference a new copy of $$a, since $$a does not appear as lvalue when the above code is executed.
If the copy constructor is required during the execution of some mutator, but a method for '=' was not specified, it can be autogenerated as a string copy if the object is a plain scalar.
$a=$b;
Something else which does not modify $a or $b....
++$a;
may be
$a=$b;
Something else which does not modify $a or $b....
$a = $a->clone(undef,"");
$a->incr(undef,"");
if $b was mathemagical, and '++' was overloaded with "\&incr", '=' was overloaded with "\&clone".
Same behaviour is triggered by "$b = $a++", which is consider a synonym for "$b = $a; ++$a".
<, >, <=, >=, ==, != in terms of <=>
lt, gt, le, ge, eq, ne in terms of cmp
<> in terms of builtin operations
${} @{} %{} &{} *{} in terms of builtin operations
Similarly, ".=" and "x=" operators lose their mathemagical properties if the string conversion substitution is applied.
When you chop() a mathemagical object it is promoted to a string and its mathemagical properties are lost. The same can happen with other operations as well.
eval 'use overload "+" => \&addmethod';
You can also use
eval 'no overload "+", "--", "<="';
though the use of these constructs during run-time is questionable.
These functions take a hash as an argument. The recognized keys of this hash are:
The corresponding values are references to functions which take three arguments: the first one is the initial string form of the constant, the second one is how Perl interprets this constant, the third one is how the constant is used. Note that the initial string form does not contain string delimiters, and has backslashes in backslash-delimiter combinations stripped (thus the value of delimiter is not relevant for processing of this string). The return value of this function is how this constant is going to be interpreted by Perl. The third argument is undefined unless for overloaded "q"- and "qr"- constants, it is "q" in single-quote context (comes from strings, regular expressions, and single-quote HERE documents), it is "tr" for arguments of "tr"/"y" operators, it is "s" for right-hand side of "s"-operator, and it is "qq" otherwise.
Since an expression "ab$cd,," is just a shortcut for 'ab' . $cd . ',,', it is expected that overloaded constant strings are equipped with reasonable overloaded catenation operator, otherwise absurd results will result. Similarly, negative numbers are considered as negations of positive constants.
Note that it is probably meaningless to call the functions overload::constant() and overload::remove_constant() from anywhere but import() and unimport() methods. From these methods they may be called as
sub import {
shift;
return unless @_;
die "unknown import: @_" unless @_ == 1 and $_[0] eq ':constant';
overload::constant integer => sub {Math::BigInt->new(shift)};
}
BUGS Currently overloaded-ness of constants does not propagate into "eval '...'".
The table of methods for all operations is cached in magic for the symbol table hash for the package. The cache is invalidated during processing of "use overload", "no overload", new function definitions, and changes in @ISA. However, this invalidation remains unprocessed until the next "bless"ing into the package. Hence if you want to change overloading structure dynamically, you'll need an additional (fake) "bless"ing to update the table.
(Every SVish thing has a magic queue, and magic is an entry in that queue. This is how a single variable may participate in multiple forms of magic simultaneously. For instance, environment variables regularly have two forms at once: their %ENV magic and their taint magic. However, the magic which implements overloading is applied to the stashes, which are rarely used directly, thus should not slow down Perl.)
If an object belongs to a package using overload, it carries a special flag. Thus the only speed penalty during arithmetic operations without overloading is the checking of this flag.
In fact, if "use overload" is not present, there is almost no overhead for overloadable operations, so most programs should not suffer measurable performance penalties. A considerable effort was made to minimize the overhead when overload is used in some package, but the arguments in question do not belong to packages using overload. When in doubt, test your speed with "use overload" and without it. So far there have been no reports of substantial speed degradation if Perl is compiled with optimization turned on.
There is no size penalty for data if overload is not used. The only size penalty if overload is used in some package is that all the packages acquire a magic during the next "bless"ing into the package. This magic is three-words-long for packages without overloading, and carries the cache table if the package is overloaded.
Copying ("$a=$b") is shallow; however, a one-level-deep copying is carried out before any operation that can imply an assignment to the object $a (or $b) refers to, like "$a++". You can override this behavior by defining your own copy constructor (see ``Copy Constructor'').
It is expected that arguments to methods that are not explicitly supposed to be changed are constant (but this is not enforced).
Here is a Perl object metaphor:
object is a reference to blessed data
and an arithmetic metaphor:
object is a thing by itself.
The main problem of overloading "=" is the fact that these metaphors imply different actions on the assignment "$a = $b" if $a and $b are objects. Perl-think implies that $a becomes a reference to whatever $b was referencing. Arithmetic-think implies that the value of ``object'' $a is changed to become the value of the object $b, preserving the fact that $a and $b are separate entities.
The difference is not relevant in the absence of mutators. After a Perl-way assignment an operation which mutates the data referenced by $a would change the data referenced by $b too. Effectively, after "$a = $b" values of $a and $b become indistinguishable.
On the other hand, anyone who has used algebraic notation knows the expressive power of the arithmetic metaphor. Overloading works hard to enable this metaphor while preserving the Perlian way as far as possible. Since it is not possible to freely mix two contradicting metaphors, overloading allows the arithmetic way to write things as far as all the mutators are called via overloaded access only. The way it is done is described in ``Copy Constructor''.
If some mutator methods are directly applied to the overloaded values, one may need to explicitly unlink other values which references the same value:
$a = new Data 23;
...
$b = $a; # $b is "linked" to $a
...
$a = $a->clone; # Unlink $b from $a
$a->increment_by(4);
Note that overloaded access makes this transparent:
$a = new Data 23;
$b = $a; # $b is "linked" to $a
$a += 4; # would unlink $b automagically
However, it would not make
$a = new Data 23;
$a = 4; # Now $a is a plain 4, not 'Data'
preserve ``objectness'' of $a. But Perl has a way to make assignments to an object do whatever you want. It is just not the overload, but tie()ing interface (see ``tie'' in perlfunc). Adding a FETCH() method which returns the object itself, and STORE() method which changes the value of the object, one can reproduce the arithmetic metaphor in its completeness, at least for variables which were tie()d from the start.
(Note that a workaround for a bug may be needed, see ``BUGS''.)
package two_face; # Scalars with separate string and
# numeric values.
sub new { my $p = shift; bless [@_], $p }
use overload '""' => \&str, '0+' => \&num, fallback => 1;
sub num {shift->[1]}
sub str {shift->[0]}
Use it as follows:
require two_face;
my $seven = new two_face ("vii", 7);
printf "seven=$seven, seven=%d, eight=%d\n", $seven, $seven+1;
print "seven contains `i'\n" if $seven =~ /i/;
(The second line creates a scalar which has both a string value, and a numeric value.) This prints:
seven=vii, seven=7, eight=8 seven contains `i'
package two_refs;
use overload '%{}' => \&gethash, '@{}' => sub { $ {shift()} };
sub new {
my $p = shift;
bless \ [@_], $p;
}
sub gethash {
my %h;
my $self = shift;
tie %h, ref $self, $self;
\%h;
}
sub TIEHASH { my $p = shift; bless \ shift, $p }
my %fields;
my $i = 0;
$fields{$_} = $i++ foreach qw{zero one two three};
sub STORE {
my $self = ${shift()};
my $key = $fields{shift()};
defined $key or die "Out of band access";
$$self->[$key] = shift;
}
sub FETCH {
my $self = ${shift()};
my $key = $fields{shift()};
defined $key or die "Out of band access";
$$self->[$key];
}
Now one can access an object using both the array and hash syntax:
my $bar = new two_refs 3,4,5,6;
$bar->[2] = 11;
$bar->{two} == 11 or die 'bad hash fetch';
Note several important features of this example. First of all, the actual type of $bar is a scalar reference, and we do not overload the scalar dereference. Thus we can get the actual non-overloaded contents of $bar by just using $$bar (what we do in functions which overload dereference). Similarly, the object returned by the TIEHASH() method is a scalar reference.
Second, we create a new tied hash each time the hash syntax is used. This allows us not to worry about a possibility of a reference loop, which would lead to a memory leak.
Both these problems can be cured. Say, if we want to overload hash dereference on a reference to an object which is implemented as a hash itself, the only problem one has to circumvent is how to access this actual hash (as opposed to the virtual hash exhibited by the overloaded dereference operator). Here is one possible fetching routine:
sub access_hash {
my ($self, $key) = (shift, shift);
my $class = ref $self;
bless $self, 'overload::dummy'; # Disable overloading of %{}
my $out = $self->{$key};
bless $self, $class; # Restore overloading
$out;
}
To remove creation of the tied hash on each access, one may an extra level of indirection which allows a non-circular structure of references:
package two_refs1;
use overload '%{}' => sub { ${shift()}->[1] },
'@{}' => sub { ${shift()}->[0] };
sub new {
my $p = shift;
my $a = [@_];
my %h;
tie %h, $p, $a;
bless \ [$a, \%h], $p;
}
sub gethash {
my %h;
my $self = shift;
tie %h, ref $self, $self;
\%h;
}
sub TIEHASH { my $p = shift; bless \ shift, $p }
my %fields;
my $i = 0;
$fields{$_} = $i++ foreach qw{zero one two three};
sub STORE {
my $a = ${shift()};
my $key = $fields{shift()};
defined $key or die "Out of band access";
$a->[$key] = shift;
}
sub FETCH {
my $a = ${shift()};
my $key = $fields{shift()};
defined $key or die "Out of band access";
$a->[$key];
}
Now if $baz is overloaded like this, then $baz is a reference to a reference to the intermediate array, which keeps a reference to an actual array, and the access hash. The tie()ing object for the access hash is a reference to a reference to the actual array, so
package symbolic; # Primitive symbolic calculator use overload nomethod => \&wrap;
sub new { shift; bless ['n', @_] }
sub wrap {
my ($obj, $other, $inv, $meth) = @_;
($obj, $other) = ($other, $obj) if $inv;
bless [$meth, $obj, $other];
}
This module is very unusual as overloaded modules go: it does not provide any usual overloaded operators, instead it provides the ``Last Resort'' operator "nomethod". In this example the corresponding subroutine returns an object which encapsulates operations done over the objects: "new symbolic 3" contains "['n', 3]", "2 + new symbolic 3" contains "['+', 2, ['n', 3]]".
Here is an example of the script which ``calculates'' the side of circumscribed octagon using the above package:
require symbolic; my $iter = 1; # 2**($iter+2) = 8 my $side = new symbolic 1; my $cnt = $iter;
while ($cnt--) {
$side = (sqrt(1 + $side**2) - 1)/$side;
}
print "OK\n";
The value of $side is
['/', ['-', ['sqrt', ['+', 1, ['**', ['n', 1], 2]],
undef], 1], ['n', 1]]
Note that while we obtained this value using a nice little script, there is no simple way to use this value. In fact this value may be inspected in debugger (see perldebug), but ony if "bareStringify" Option is set, and not via "p" command.
If one attempts to print this value, then the overloaded operator "" will be called, which will call "nomethod" operator. The result of this operator will be stringified again, but this result is again of type "symbolic", which will lead to an infinite loop.
Add a pretty-printer method to the module symbolic.pm:
sub pretty {
my ($meth, $a, $b) = @{+shift};
$a = 'u' unless defined $a;
$b = 'u' unless defined $b;
$a = $a->pretty if ref $a;
$b = $b->pretty if ref $b;
"[$meth $a $b]";
}
Now one can finish the script by
print "side = ", $side->pretty, "\n";
The method "pretty" is doing object-to-string conversion, so it is natural to overload the operator "" using this method. However, inside such a method it is not necessary to pretty-print the components $a and $b of an object. In the above subroutine "[$meth $a $b]" is a catenation of some strings and components $a and $b. If these components use overloading, the catenation operator will look for an overloaded operator "."; if not present, it will look for an overloaded operator "". Thus it is enough to use
use overload nomethod => \&wrap, '""' => \&str;
sub str {
my ($meth, $a, $b) = @{+shift};
$a = 'u' unless defined $a;
$b = 'u' unless defined $b;
"[$meth $a $b]";
}
Now one can change the last line of the script to
print "side = $side\n";
which outputs
side = [/ [- [sqrt [+ 1 [** [n 1 u] 2]] u] 1] [n 1 u]]
and one can inspect the value in debugger using all the possible methods.
Something is still amiss: consider the loop variable $cnt of the script. It was a number, not an object. We cannot make this value of type "symbolic", since then the loop will not terminate.
Indeed, to terminate the cycle, the $cnt should become false. However, the operator "bool" for checking falsity is overloaded (this time via overloaded ""), and returns a long string, thus any object of type "symbolic" is true. To overcome this, we need a way to compare an object to 0. In fact, it is easier to write a numeric conversion routine.
Here is the text of symbolic.pm with such a routine added (and slightly modified str()):
package symbolic; # Primitive symbolic calculator
use overload
nomethod => \&wrap, '""' => \&str, '0+' => \#
sub new { shift; bless ['n', @_] }
sub wrap {
my ($obj, $other, $inv, $meth) = @_;
($obj, $other) = ($other, $obj) if $inv;
bless [$meth, $obj, $other];
}
sub str {
my ($meth, $a, $b) = @{+shift};
$a = 'u' unless defined $a;
if (defined $b) {
"[$meth $a $b]";
} else {
"[$meth $a]";
}
}
my %subr = ( n => sub {$_[0]},
sqrt => sub {sqrt $_[0]},
'-' => sub {shift() - shift()},
'+' => sub {shift() + shift()},
'/' => sub {shift() / shift()},
'*' => sub {shift() * shift()},
'**' => sub {shift() ** shift()},
);
sub num {
my ($meth, $a, $b) = @{+shift};
my $subr = $subr{$meth}
or die "Do not know how to ($meth) in symbolic";
$a = $a->num if ref $a eq __PACKAGE__;
$b = $b->num if ref $b eq __PACKAGE__;
$subr->($a,$b);
}
All the work of numeric conversion is done in %subr and num(). Of course, %subr is not complete, it contains only operators used in the example below. Here is the extra-credit question: why do we need an explicit recursion in num()? (Answer is at the end of this section.)
Use this module like this:
require symbolic; my $iter = new symbolic 2; # 16-gon my $side = new symbolic 1; my $cnt = $iter;
while ($cnt) {
$cnt = $cnt - 1; # Mutator `--' not implemented
$side = (sqrt(1 + $side**2) - 1)/$side;
}
printf "%s=%f\n", $side, $side;
printf "pi=%f\n", $side*(2**($iter+2));
It prints (without so many line breaks)
[/ [- [sqrt [+ 1 [** [/ [- [sqrt [+ 1 [** [n 1] 2]]] 1]
[n 1]] 2]]] 1]
[/ [- [sqrt [+ 1 [** [n 1] 2]]] 1] [n 1]]]=0.198912
pi=3.182598
The above module is very primitive. It does not implement mutator methods ("++", "-=" and so on), does not do deep copying (not required without mutators!), and implements only those arithmetic operations which are used in the example.
To implement most arithmetic operations is easy; one should just use the tables of operations, and change the code which fills %subr to
my %subr = ( 'n' => sub {$_[0]} );
foreach my $op (split " ", $overload::ops{with_assign}) {
$subr{$op} = $subr{"$op="} = eval "sub {shift() $op shift()}";
}
my @bins = qw(binary 3way_comparison num_comparison str_comparison);
foreach my $op (split " ", "@overload::ops{ @bins }") {
$subr{$op} = eval "sub {shift() $op shift()}";
}
foreach my $op (split " ", "@overload::ops{qw(unary func)}") {
print "defining `$op'\n";
$subr{$op} = eval "sub {$op shift()}";
}
Due to ``Calling Conventions for Mutators'', we do not need anything special to make "+=" and friends work, except filling "+=" entry of %subr, and defining a copy constructor (needed since Perl has no way to know that the implementation of '+=' does not mutate the argument, compare ``Copy Constructor'').
To implement a copy constructor, add "'=' => \&cpy" to "use overload" line, and code (this code assumes that mutators change things one level deep only, so recursive copying is not needed):
sub cpy {
my $self = shift;
bless [@$self], ref $self;
}
To make "++" and "--" work, we need to implement actual mutators, either directly, or in "nomethod". We continue to do things inside "nomethod", thus add
if ($meth eq '++' or $meth eq '--') {
@$obj = ($meth, (bless [@$obj]), 1); # Avoid circular reference
return $obj;
}
after the first line of wrap(). This is not a most effective implementation, one may consider
sub inc { $_[0] = bless ['++', shift, 1]; }
instead.
As a final remark, note that one can fill %subr by
my %subr = ( 'n' => sub {$_[0]} );
foreach my $op (split " ", $overload::ops{with_assign}) {
$subr{$op} = $subr{"$op="} = eval "sub {shift() $op shift()}";
}
my @bins = qw(binary 3way_comparison num_comparison str_comparison);
foreach my $op (split " ", "@overload::ops{ @bins }") {
$subr{$op} = eval "sub {shift() $op shift()}";
}
foreach my $op (split " ", "@overload::ops{qw(unary func)}") {
$subr{$op} = eval "sub {$op shift()}";
}
$subr{'++'} = $subr{'+'};
$subr{'--'} = $subr{'-'};
This finishes implementation of a primitive symbolic calculator in 50 lines of Perl code. Since the numeric values of subexpressions are not cached, the calculator is very slow.
Here is the answer for the exercise: In the case of str(), we need no explicit recursion since the overloaded "."-operator will fall back to an existing overloaded operator "". Overloaded arithmetic operators do not fall back to numeric conversion if "fallback" is not explicitly requested. Thus without an explicit recursion num() would convert "['+', $a, $b]" to "$a + $b", which would just rebuild the argument of num().
If you wonder why defaults for conversion are different for str() and num(), note how easy it was to write the symbolic calculator. This simplicity is due to an appropriate choice of defaults. One extra note: due to the explicit recursion num() is more fragile than sym(): we need to explicitly check for the type of $a and $b. If components $a and $b happen to be of some related type, this may lead to problems.
To see it in action, add a method
sub STORE {
my $obj = shift;
$#$obj = 1;
@$obj->[0,1] = ('=', shift);
}
to the package "symbolic". After this change one can do
my $a = new symbolic 3; my $b = new symbolic 4; my $c = sqrt($a**2 + $b**2);
and the numeric value of $c becomes 5. However, after calling
$a->STORE(12); $b->STORE(5);
the numeric value of $c becomes 13. There is no doubt now that the module symbolic provides a symbolic calculator indeed.
To hide the rough edges under the hood, provide a tie()d interface to the package "symbolic" (compare with ``Metaphor clash''). Add methods
sub TIESCALAR { my $pack = shift; $pack->new(@_) }
sub FETCH { shift }
sub nop { } # Around a bug
(the bug is described in ``BUGS''). One can use this new interface as
tie $a, 'symbolic', 3; tie $b, 'symbolic', 4; $a->nop; $b->nop; # Around a bug
my $c = sqrt($a**2 + $b**2);
Now numeric value of $c is 5. After "$a = 12; $b = 5" the numeric value of $c becomes 13. To insulate the user of the module add a method
sub vars { my $p = shift; tie($_, $p), $_->nop foreach @_; }
Now
my ($a, $b); symbolic->vars($a, $b); my $c = sqrt($a**2 + $b**2);
$a = 3; $b = 4; printf "c5 %s=%f\n", $c, $c;
$a = 12; $b = 5; printf "c13 %s=%f\n", $c, $c;
shows that the numeric value of $c follows changes to the values of $a and $b.
Using the "m" command of Perl debugger (see perldebug) one can deduce which operations are overloaded (and which ancestor triggers this overloading). Say, if "eq" is overloaded, then the method "(eq" is shown by debugger. The method "()" corresponds to the "fallback" key (in fact a presence of this method shows that this package has overloading enabled, and it is what is used by the "Overloaded" function of module "overload").
The module might issue the following warnings:
For the purpose of inheritance every overloaded package behaves as if "fallback" is present (possibly undefined). This may create interesting effects if some package is not overloaded, but inherits from two overloaded packages.
Relation between overloading and tie()ing is broken. Overloading is triggered or not basing on the previous class of tie()d value.
This happens because the presence of overloading is checked too early, before any tie()d access is attempted. If the FETCH()ed class of the tie()d value does not change, a simple workaround is to access the value immediately after tie()ing, so that after this call the previous class coincides with the current one.
Needed: a way to fix this without a speed penalty.
Barewords are not covered by overloaded string constants.
This document is confusing. There are grammos and misleading language used in places. It would seem a total rewrite is needed.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |