Проект OpenNet: MAN acpi_fujitsu (4) Специальные файлы /dev/* (FreeBSD и Linux)

Интерактивная система просмотра системных руководств (man-ов)

acpi_fujitsu (4)

>> acpi_fujitsu (4) ( FreeBSD man: Специальные файлы /dev/* )

BSD mandoc

NAME



acpi_fujitsu

 - Fujitsu Laptop Extras

SYNOPSIS

To compile this driver into the kernel, place the following line in your kernel configuration file:

device acpi_fujitsu

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

acpi_fujitsu_load="YES"

DESCRIPTION

The driver enables the ACPI-controlled buttons on Fujitsu notebooks. The button events are sent to userspace via devd(8), and a sysctl(8) interface is provided to simulate the hardware events.

Using this driver, one can control the brightness of the display, the volume of the speakers, and the internal (eraserhead) mouse pointer.

SYSCTL VARIABLES

These sysctls are currently implemented:

hw.acpi.fujitsu.lcd_brightness: Makes the LCD backlight brighter or dimmer.
hw.acpi.fujitsu.pointer_enable: Enables or disables the internal mouse pointer.
hw.acpi.fujitsu.volume: Controls the speaker volume.
hw.acpi.fujitsu.mute: Mutes the speakers.

Defaults for these sysctls can be set in sysctl.conf5.

EXAMPLES

The following can be added to devd.conf5 in order to pass button events to a /usr/local/sbin/acpi_oem_exec.sh script:

notify 10 {
        match "system"          "ACPI";
        match "subsystem"       "FUJITSU";
        action "/usr/local/sbin/acpi_oem_exec.sh $notify fujitsu";
};

A possible /usr/local/sbin/acpi_oem_exec.sh script might look like:

#!/bin/sh
#
if [ "$1" = "" -o "$2" = "" ]
then
        echo "usage: $0 notify oem_name"
        exit 1
fi
NOTIFY=`echo $1`
LOGGER="logger"
CALC="bc"
BC_PRECOMMANDS="scale=2"
ECHO="echo"
CUT="cut"
MAX_LCD_BRIGHTNESS=7
MAX_VOLUME=16
OEM=$2
DISPLAY_PIPE=/tmp/acpi_${OEM}_display

case ${NOTIFY} in
        0x00)
                LEVEL=`sysctl -n hw.acpi.${OEM}.mute`
                if [ "$LEVEL" = "1" ]
                then
                        MESSAGE="volume muted"
                else
                        MESSAGE="volume unmuted"
                fi
                ;;
        0x01)
                LEVEL=`sysctl -n hw.acpi.${OEM}.pointer_enable`
                if [ "$LEVEL" = "1" ]
                then
                        MESSAGE="pointer enabled"
                else
                        MESSAGE="pointer disabled"
                fi
                ;;
        0x02)
                LEVEL=`sysctl -n hw.acpi.${OEM}.lcd_brightness`
                PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \
                         ${LEVEL} / ${MAX_LCD_BRIGHTNESS} * 100" |\
                         ${CALC} | ${CUT} -d . -f 1`
                MESSAGE="brightness level ${PERCENT}%"
                ;;
        0x03)
                LEVEL=`sysctl -n hw.acpi.${OEM}.volume`
                PERCENT=`${ECHO} "${BC_PRECOMMANDS} ; \
                        ${LEVEL} / ${MAX_VOLUME} * 100" | \
                         ${CALC} | ${CUT} -d . -f 1`
                MESSAGE="volume level ${PERCENT}%"
                ;;
        *)
                ;;
        esac
        ${LOGGER} ${MESSAGE}
        if [ -p ${DISPLAY_PIPE} ]
        then
                ${ECHO} ${MESSAGE} >> ${DISPLAY_PIPE} &
        fi
exit 0

HISTORY

The driver first appeared in Fx 5.4 .

AUTHORS

An -nosplit The driver was written by An Sean Bullington Aq [email protected] , An Anish Mistry Aq [email protected] , and An Marc Santcroos Aq [email protected] .

This manual page was written by An Philip Paeps Aq [email protected] .