Интерактивная система просмотра системных руководств (man-ов)
ieee1394 (4)
>> ieee1394 (4) ( FreeBSD man: Специальные файлы /dev/* )
ieee1394 (7) ( Solaris man: Макропакеты и соглашения )
BSD mandoc
NAME
firewire
- IEEE1394 High-performance Serial Bus
SYNOPSIS
To compile this driver into the kernel,
place the following line in your
kernel configuration file:
device firewire
Alternatively, to load the driver as a
module at boot time, place the following line in
loader.conf5:
firewire_load="YES"
DESCRIPTION
Fx provides machine-independent bus support and raw drivers for
interfaces.
The
driver consists of two layers: the controller and the
bus layer.
The controller attaches to a physical bus
(like
pci(4)).
The
bus attaches to the controller.
Additional drivers can be attached to the bus.
Up to 63 devices, including the host itself, can be attached to
a
bus.
The root node is dynamically assigned with a PHY device function.
Also, the other
bus specific parameters,
e.g., node ID, cycle master, isochronous resource manager and bus
manager, are dynamically assigned, after bus reset is initiated.
On the
bus, every device is identified by an EUI 64 address.