Интерактивная система просмотра системных руководств (man-ов) ncv (4) >> ncv ( FreeBSD man: Специальные файлы /dev/* )
NAME
ncv
- NCR 53C500 based SCSI host adapter driver
SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
device scbus
device ncv
Alternatively, to load the driver as a
module at boot time, place the following line in
loader.conf5:
ncv_load="YES"
DESCRIPTION
The
SCSI
bus
connected to an NCR 53C500 based
PC-Card
SCSI
host adapter or an Adaptec AHA-2920 on the
PCI
bus.
HARDWARE
The following devices are currently supported by the
I-O DATA PCSC-DV
KME KXLC002 (TAXAN ICD-400PN, etc.), KXLC004, and UJDCD450
Macnica Miracle SCSI-II mPS110
Media Intelligent MSC-110, MSC-200
NEC PC-9801N-J03R
New Media Corporation BASICS SCSI
Qlogic Fast SCSI
RATOC REX-9530, REX-5572 (SCSI only)
DIAGNOSTICS
The following error messages are sometimes returned:
"SCSI BUS RESET failed"
Usually returned when a failure occurs during
the bus reset.
"CMD_NOP failed"
No operation or the operation has failed.
"CMD_NOP|CMD_DMA"
A failure occurred during the
DMA
read/write operations.
The
SEE ALSO
cardbus (4),
cd (4),
da (4),
pccard (4),
sa (4),
scsi (4)
HISTORY
The
PAO
and merged in
Fx 4.2 .
AUTHORS
An -nosplit
The
[email protected] [email protected]
Index
NAME
SYNOPSIS
DESCRIPTION
HARDWARE
DIAGNOSTICS
SEE ALSO
HISTORY
AUTHORS
