Проект OpenNet: MAN snd_sbc (4) Специальные файлы /dev/* (FreeBSD и Linux)

Интерактивная система просмотра системных руководств (man-ов)

snd_sbc (4)

>> snd_sbc (4) ( FreeBSD man: Специальные файлы /dev/* )

BSD mandoc

NAME



snd_sbc

 
snd_sb16

 
snd_sb8

 - Creative Sound Blaster ISA and compatible bridge device driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device sound device snd_sbc device snd_sb16 device snd_sb8

Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf5:

snd_sbc_load="YES"
snd_sb16_load="YES"
snd_sb8_load="YES"

Non-PnP cards require the following lines in device.hints5:

hint.sbc.0.at="isa"
hint.sbc.0.port="0x220"
hint.sbc.0.irq="5"
hint.sbc.0.drq="1"
hint.sbc.0.flags="0x15"

DESCRIPTION

The bridge driver allows the generic audio driver sound(4) to attach to Creative Sound Blaster ISA (mostly SB16 or SB8, known as SoundBlaster Pro) compatible audio cards.

The value of flags specifies the secondary DMA channel. If the secondary DMA channel is C, set the flags to (C | 0x10). For a sound card without the secondary DMA channel, the flags should be set to zero.

HARDWARE

The driver supports the following sound cards:

Avance Asound 110
Avance Logic ALS100+
Avance Logic ALS120
Creative SB16
Creative SB32
Creative AWE64
Creative AWE64 Gold
Creative ViBRA16C
Creative ViBRA16X
ESS ES1681
ESS ES1688
ESS ES1868
ESS ES1869
ESS ES1878
ESS ES1879
ESS ES1888

DIAGNOSTICS

sb_dspwr(XX) timed out.: A command to the DSP has timed out. Check the I/O port configuration.
bad irq XX (5/7/9/10 valid): The IRQ given to the driver is not valid.