Интерактивная система просмотра системных руководств (man-ов)
uplcom (4)
>> uplcom (4) ( FreeBSD man: Специальные файлы /dev/* )
BSD mandoc
NAME
uplcom
- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver
SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
device uplcom
device ucom
Alternatively, to load the driver as a
module at boot time, place the following line in
loader.conf5:
uplcom_load="YES"
DESCRIPTION
The
driver provides support for various serial adapters based on the Prolific
PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.
The device is accessed through the
ucom(4)
driver which makes it behave like a
tty(4).
HARDWARE
The
driver supports the following adapters:
-
ATEN UC-232A
-
BAFO BF-800
-
BAFO BF-810
-
ELECOM UC-SGT
-
HAL Corporation Crossam2+USB IR commander
-
Hama USB RS-232 Serial Adapter
-
Hamlet exagerate XURS232
-
IOGEAR UC-232A
-
I/O DATA USB-RSAQ
-
I/O DATA USB-RSAQ2
-
I/O DATA USB-RSAQ3
-
PLANEX USB-RS232 URS-03
-
RATOC REX-USB60
-
Radio Shack USB Serial Cable
-
Sandberg USB to Serial Link (model number 133-08)
-
SOURCENEXT KeikaiDenwa 8 (with and without charger)
-
Sony Ericsson USB Cable (Susteen USB Data Cable)
-
Willcom W-SIM DD PHS terminal.(WS002IN)
SEE ALSO
tty(4),
ucom(4),
usb(4)
HISTORY
The
driver
appeared in
Nx 1.6 .
This manual page was adopted from
Nx by
An Tom Rhodes Aq [email protected]
in April 2002.
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- HARDWARE
-
- SEE ALSO
-
- HISTORY
-
