i128
is an Xorg driver for Number 9 I128 video cards. The driver is
accelerated and provides support for all versions of the I128 chip family,
including the SGI flatpanel configuration. Multi-head configurations are
supported.
SUPPORTED HARDWARE
The
i128
driver supports PCI and AGP video cards based on the following I128 chips:
I128 rev 1
(original)
I128-II
I128-T2R
Ticket 2 Ride
I128-T2R4
Ticket 2 Ride IV
CONFIGURATION DETAILS
Please refer to xorg.conf(5) for general configuration
details. This section only covers configuration details specific to this
driver.
The driver auto-detects the chipset type and may not be overridden.
The driver auto-detects the amount of video memory present for all
chips and may not be overridden.
The following driver
Options
are supported:
Option N'34'HWCursorN'34' N'34'booleanN'34'
Enable or disable the HW cursor. Default: on.
Option N'34'NoAccelN'34' N'34'booleanN'34'
Disable or enable acceleration. Default: acceleration is enabled.
Option N'34'SyncOnGreenN'34' N'34'booleanN'34'
Enable or disable combining the sync signals with the green signal.
Default: off.
Option N'34'Dac6BitN'34' N'34'booleanN'34'
Reduce DAC operations to 6 bits.
Default: false.
Option N'34'DebugN'34' N'34'booleanN'34'
This turns on verbose debug information from the driver.
Default: off.