[ новости /+++ | форум | теги | ]

NAME

boot.config

 - Configuration file for the boot blocks

 

DESCRIPTION

When the Fx boot loader runs, it searches the ``a '' slice of the boot partition for a file (as a result, slices which are missing an ``a '' partition require user intervention during the boot process). If the file is found, its contents are used as the default configuration options for the boot block code and are echoed to the system console.

A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other valid boot(8) option on a single line, as it is done at the ``boot: '' prompt.

The options related to the boot image selection described below and all the other options available for are documented in detail in the boot(8) manual page.  

EXAMPLES

# echo "-P" > /boot.config

will activate the serial console of Fx .

The command:

# echo "1:ad(1,a)/boot/loader" > /boot.config

will instruct the second boot stage of loader(8) on the first disk to boot with the third boot stage of loader(8) from the second disk.

The command:

# echo "1:ad(1,a)/boot/loader -P" > /boot.config

will do both of the above.  

FILES

/boot.config

parameters for the boot blocks (optional)

SEE ALSO

AUTHORS

Index

NAME

DESCRIPTION

EXAMPLES

FILES

SEE ALSO

AUTHORS

Партнёры:

Хостинг: