Партнёры:
Хостинг:
stapprobes.nfs - systemtap NFS client side probe points
This family of probe points is used to probe NFS activities on client side. It contains the following probe points:
Fires whenever doing a llseek operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
maxbyte
Maximum size of the files
offset
the offset of file to be repositioned
origin
the original position. The possible value could be:
SEEK_SET
The offset is set to offset bytes.
SEEK_CUR
The offset is set to its current location
plus offset bytes.
SEEK_END
The offset is set to the size of the file
plus offset bytes.
Fires whenever nfs llseek operation is done
Arguments:
retstr
resulting offset location
Fires whenever doing a read operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
len,size
number of bytes to be read
pos
current file offset
buf
the buf address
Fires whenever nfs read operation is done
Arguments:
size
number of bytes read
Fires whenever doing a write operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
len,size
number of bytes to written
pos
current file offset
buf
the buf address
Fires whenever nfs write operation is done
Arguments:
size
number of bytes written
Fires whenever doing an aio_read operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
count,size
number of bytes to be read
pos
current file offset
buf
the buf address
parent_name
parent dir name
file_name
file name
cache_valid
cache related bit mask flag
cache_time
when we started read-caching this inode
attrtimeo
how long the cached information is assumed to be valid.
The cached attrs for this inode needed to be revalidated if
jiffies - read_cache_jiffies > attrtime
Fires whenever nfs aio_read operation is done
Arguments:
size
number of bytes read
Fires whenever doing an aio_write operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
count,size
number of bytes to written
pos
current file offset
buf
the buf address
parent_name
parent dir name
file_name
file name
Fires whenever nfs aio_write operation is done
Arguments:
size
number of bytes written
Fires whenever doing an mmap operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
vm_start
start address within vm_mm
vm_end
the first byte after end address within vm_mm
vm_flag
vm flags
parent_name
parent dir name
file_name
file name
cache_valid
cache related bit mask flag
cache_time
when we started read-caching this inode
attrtimeo
how long the cached information is assumed to be valid.
The cached attrs for this inode needed to be revalidated if
jiffies - read_cache_jiffies > attrtime
Fires whenever doing an open operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
file_name
file name
flag
file flag
i_size
file length in bytes
Fires whenever doing an flush operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
mode
file mode
ndirty
number of dirty page to be flushed
Fires whenever doing a release page operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
mode
file mode
Fires whenever doing a fsync operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
ndirty
number of dirty page to be flushed
Fires whenever doing a file lock operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
i_mode
file type and access rights
cmd
cmd arguments
fl_type
lock type
fl_flag
lock flags
fl_start
starting offset of locked region
fl_end
ending offset of locked region
Fires whenever doing a send file operation on nfs client side
Arguments:
dev
device identifier
ino
inode number
s_id
the pointer to s_id
devname
the combination of server ip and the name of block device
on server
count,size
number of bytes to sent
ppos
current file offset
cache_valid
cache related bit mask flag
cache_time
when we started read-caching this inode
attrtimeo
how long the cached information is assumed to be valid.
The cached attrs for this inode needed to be revalidated if
jiffies - read_cache_jiffies > attrtime
Fires whenever nfs sendfile operation is done
Arguments:
size
number of bytes sent
Fires whenever doing a check flag operation on nfs client side
Arguments:
flags
file flag
Fires when a previous async read operation failed
Arguments:
__page
the address of page
dev
device identifier
ino
inode number
i_flag
file flags
i_size
file length in bytes
sb_flag
super block flags
file
file argument
page_index
offset within mapping
rsize
read size (in bytes)
Fies when in readahead way,read several pages once
Arguments:
dev
device identifier
ino
inode number
nr_pages ,size
number of pages attempted to read in this execution
file
filp argument
rpages
read size (in pages)
rsize
read size (in bytes)
Fies whenever a nfs read pages operation is done
Arguments:
size
number of pages read
Fies whenever set page dirty on nfs client side
Arguments:
__page
the address of page
page_flag
page flags
Fies whenever writing an mapped page to the server from nfs client side
Arguments:
__page
the address of page
dev
device identifier
ino
inode number
for_reclaim
a flag of writeback_control, indicates if it's invoked from the page allocator
for_kupdate
a flag of writeback_control, indicates if it's a kupdate writeback
The priority of wb is decided by above two flags
i_flag
file flags
i_size
file length in bytes
i_state
inode state flags
sb_flag
super block flags
page_index
offset within mapping
wsize
write size
Fies whenever writing several dirty pages to the server from nfs client sides
Arguments:
dev
device identifier
ino
inode number
for_reclaim
a flag of writeback_control, indicates if it's invoked from the page allocator
for_kupdate
a flag of writeback_control, indicates if it's a kupdate writeback
The priority of wb is decided by above two flags
wpages
write size (in pages)
wsize
write size
nr_to_write ,size
number of pages attempted to be written in this execution
Fies whenever prepare a page for writting on nfs client sides
Arguments:
__page
the address of page
dev
device identifier
ino
inode number
offset
start address of this write operation
to
end address of this write operation
page_index
offset within mapping
size
read bytes
Fies often after prepare write operation
Arguments:
__page
the address of page
dev
device identifier
ino
inode number
offset
start address of this write operation
to
end address of this write operation
i_flag
file flags
i_size
file length in bytes
sb_flag
super block flag
page_index
offset within mapping
size
read bytes
Arguments:
__page
the address of page
dev
device identifier
ino
inode number
page_index
offset within mapping
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
filename
the name of file which client opens/searchs on server
name_len
the length of file name
bitmask0, bitmask1
V4 bitmask representing the set of attributes
supported on this filesystem (only in probe nfs.proc4.lookup)
Fires when client synchronously reads file from server
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
flags
used to set task->tk_flags in rpc_init_task function
size,count
number of bytes to be read in this execution
offset
the file offset
Fires when synchronously reading file from server is done
Arguments:
size
number of bytes read
Fires when client synchronously writes file to server
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
flags
used to set task->tk_flags in rpc_init_task function
size,count
number of bytes to be written in this execution
offset
the file offset
bitmask0, bitmask1
V4 bitmask representing the set of attributes
supported on this filesystem (only in probe nfs.proc4.lookup)
Fires when synchronously writting file from server is done
Arguments:
size
number of bytes written
Fires when client writes the buffered data to disk,the buffered data is asynchronously written by client before(not exist in NFSV2)
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
size,count
number of bytes to be written in this execution
offset
the file offset
bitmask0, bitmask1
V4 bitmask representing the set of attributes
supported on this filesystem (only in probe nfs.proc4.lookup)
Fires when committing operation is done
Arguments:
size
number of bytes written
Fires when client asynchronously reads file from server, this function is used to setup a read rpc task,not do a real read operation.
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
size,count
number of bytes to be read in this execution
offset
the file offset
Fires when a read reply is received or some read error occur (timeout or socket shutdown)
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
status
result of last async read operation
count
number of bytes read
timestamp
time stamp ,which is used for lease renewal (only
in nfs.proc4.read_done)
Fires when client asynchronously write data to server, this function is used to setup a write rpc task,not do a write read operation.
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
size,count
number of bytes to be written in this execution
offset
the file offset
how
used to set args.stable,The possible value could be:
NFS_UNSTABLE,
NFS_DATA_SYNC,
NFS_FILE_SYNC
(only in nfs.proc3.write_setup and nfs.proc4.write_setup)
bitmask0, bitmask1
V4 bitmask representing the set of attributes supported
on this filesystem (only in probe nfs.proc4.write_setup)
Fires when a write reply is received or some write error occur (timeout or socket shutdown)
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
status
result of last async write operation
valid
fattr->valid ,indicates which fields are valid
count
number of bytes written
timestamp
time stamp ,which is used for lease renewal (only
in nfs.proc4.read_done)
Fires when client asynchronously do a commit operation, this function is used to setup a commit rpc task,not do a commit read operation.
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
size,count
number of bytes to be written in this execution
offset
the file offset
bitmask0, bitmask1
V4 bitmask representing the set of attributes supported
on this filesystem (only in probe nfs.proc4.commit_setup)
Fires when a commit reply is received or some commit error occur (timeout or socket shutdown)
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
status
result of last async write operation
valid
fattr->valid ,indicates which fields are valid
count
number of bytes written
timestamp
time stamp ,which is used for lease renewal (only
in nfs.proc4.read_done)
Fires whenever doing a open operation on nfs client side, the nfs_open function is used to allocate file read/write context information
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
filename
file name
flag
file flag
mode
file mode
Fires whenever doing a release operation on nfs client side,
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
filename
file name
flag
file flag
mode
file mode
Fires whenever doing the error handling, only exist in NFSV4
errorcode
error code
Fires whenever nfs client creates a file on server
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
fh
file handler of parent dir
filename
file name
filelen
length of file name
flag
indicates create mode(only for NFSV3 and NFSV4)
Fires whenever nfs client removes a file from server
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
fh
file handler of parent dir
filename
file name
filelen
length of file name
Fires whenever nfs client renames a file on server
Arguments:
server_ip
ip address of server
prot
transfer protocol
version
nfs version
old_fh
file handler of old parent dir
old_name
old file name
old_filelen
length of old file name
new_fh
file handler of new parent dir
new_name
new file name
new_filelen
length of new file name
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |