Партнёры:
Хостинг:
NAME
terminfo - terminal capability data base
SYNOPSIS
/opt/sfw/share/terminfo/*/*
DESCRIPTION
Terminfo is a data base describing terminals, used by
screen-oriented programs such as nvi(1), rogue(1) and
libraries such as curses(3X). Terminfo describes terminals
by giving a set of capabilities which they have, by specify-
ing how to perform screen operations, and by specifying pad-
ding requirements and initialization sequences.
Entries in terminfo consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
notated as \072). White space after the `,' separator is
ignored. The first entry for each terminal gives the names
which are known for the terminal, separated by `|' charac-
ters. The first name given is the most common abbreviation
for the terminal, the last name given should be a long name
fully identifying the terminal, and all others are under-
stood as synonyms for the terminal name. All names but the
last should be in lower case and contain no blanks; the last
name may well contain upper case and blanks for readability.
Terminal names (except for the last, verbose entry) should
be chosen using the following conventions. The particular
piece of hardware making up the terminal should have a root
name, thus ``hp2621''. This name should not contain
hyphens. Modes that the hardware can be in, or user prefer-
ences, should be indicated by appending a hyphen and a mode
suffix. Thus, a vt100 in 132 column mode would be vt100-w.
The following suffixes should be used where possible:
Suffix Meaning Example
-nn Number of lines on the screen aaa-60
-np Number of pages of memory c100-4p
-am With automargins (usually the default) vt100-am
-m Mono mode; suppress color ansi-m
-mc Magic cookie; spaces when highlighting wy30-mc
-na No arrow keys (leave them in local) c100-na
-nam Without automatic margins vt100-nam
-nl No status line att4415-nl
-ns No status line hp2626-ns
-rv Reverse video c100-rv
-s Enable status line vt100-s
-vb Use visible bell instead of beep wy370-vb
-w Wide mode (> 80 columns, usually 132) vt100-w
For more on terminal naming conventions, see the term(7)
manual page.
Capabilities
The following is a complete table of the capabilities
included in a terminfo description block and available to
terminfo-using code. In each line of the table,
The variable is the name by which the programmer (at the
terminfo level) accesses the capability.
The capname is the short name used in the text of the data-
base, and is used by a person updating the database. When-
ever possible, capnames are chosen to be the same as or
similar to the ANSI X3.64-1979 standard (now superseded by
ECMA-48, which uses identical or very similar names).
Semantics are also intended to match those of the specifica-
tion.
The termcap code is the old termcap capability name (some
capabilities are new, and have names which termcap did not
originate).
Capability names have no hard length limit, but an informal
limit of 5 characters has been adopted to keep them short
and to allow the tabs in the source file Caps to line up
nicely.
Finally, the description field attempts to convey the seman-
tics of the capability. You may find some codes in the
description field:
(P) indicates that padding may be specified
#[1-9]
in the description field indicates that the string is
passed through tparm with parms as given (#i).
(P*) indicates that padding may vary in proportion to the
number of lines affected
(#i) indicates the ith parameter.
These are the boolean capabilities:
Variable Cap- TCap Description
Booleans name Code
auto_left_margin bw bw cub1 wraps from
column 0 to last
column
auto_right_margin am am terminal has
automatic margins
back_color_erase bce ut screen erased with
background color
can_change ccc cc terminal can re-
define existing
colors
ceol_standout_glitch xhp xs standout not erased
by overwriting (hp)
col_addr_glitch xhpa YA only positive motion
for hpa/mhpa caps
cpi_changes_res cpix YF changing character
pitch changes reso-
lution
cr_cancels_micro_mode crxm YB using cr turns off
micro mode
dest_tabs_magic_smso xt xt tabs destructive,
magic so char
(t1061)
eat_newline_glitch xenl xn newline ignored
after 80 cols (con-
cept)
erase_overstrike eo eo can erase over-
strikes with a blank
generic_type gn gn generic line type
hard_copy hc hc hardcopy terminal
hard_cursor chts HC cursor is hard to
see
has_meta_key km km Has a meta key
(i.e., sets 8th-bit)
has_print_wheel daisy YC printer needs opera-
tor to change char-
acter set
has_status_line hs hs has extra status
line
hue_lightness_saturation hls hl terminal uses only
HLS color notation
(Tektronix)
insert_null_glitch in in insert mode distin-
guishes nulls
lpi_changes_res lpix YG changing line pitch
changes resolution
memory_above da da display may be
retained above the
screen
memory_below db db display may be
retained below the
screen
move_insert_mode mir mi safe to move while
in insert mode
move_standout_mode msgr ms safe to move while
in standout mode
needs_xon_xoff nxon nx padding won't work,
xon/xoff required
no_esc_ctlc xsb xb beehive (f1=escape,
f2=ctrl C)
no_pad_char npc NP pad character does
not exist
non_dest_scroll_region ndscr ND scrolling region is
non-destructive
non_rev_rmcup nrrmc NR smcup does not
reverse rmcup
over_strike os os terminal can over-
strike
prtr_silent mc5i 5i printer won't echo
on screen
row_addr_glitch xvpa YD only positive motion
for vpa/mvpa caps
semi_auto_right_margin sam YE printing in last
column causes cr
status_line_esc_ok eslok es escape can be used
on the status line
tilde_glitch hz hz can't print ~'s
(hazeltine)
transparent_underline ul ul underline character
overstrikes
xon_xoff xon xo terminal uses
xon/xoff handshaking
These are the numeric capabilities:
Variable Cap- TCap Description
Numeric name Code
columns cols co number of columns in
a line
init_tabs it it tabs initially every
# spaces
label_height lh lh rows in each label
label_width lw lw columns in each
label
lines lines li number of lines on
screen or page
lines_of_memory lm lm lines of memory if >
line. 0 means varies
magic_cookie_glitch xmc sg number of blank
characters left by
smso or rmso
max_attributes ma ma maximum combined
attributes terminal
can handle
max_colors colors Co maximum number of
colors on screen
max_pairs pairs pa maximum number of
color-pairs on the
screen
maximum_windows wnum MW maximum number of
defineable windows
no_color_video ncv NC video attributes
that can't be used
with colors
num_labels nlab Nl number of labels on
screen
padding_baud_rate pb pb lowest baud rate
where padding needed
virtual_terminal vt vt virtual terminal
number (CB/unix)
width_status_line wsl ws number of columns in
status line
The following numeric capabilities are present in the SVr4.0
term structure, but are not yet documented in the man page.
They came in with SVr4's printer support.
Variable Cap- TCap Description
Numeric name Code
bit_image_entwining bitwin Yo number of passes for
each bit-image row
bit_image_type bitype Yp type of bit-image
device
buffer_capacity bufsz Ya numbers of bytes
buffered before
printing
buttons btns BT number of buttons on
mouse
dot_horz_spacing spinh Yc spacing of dots hor-
izontally in dots
per inch
dot_vert_spacing spinv Yb spacing of pins
vertically in pins
per inch
max_micro_address maddr Yd maximum value in
micro_..._address
max_micro_jump mjump Ye maximum value in
parm_..._micro
micro_col_size mcs Yf character step size
when in micro mode
micro_line_size mls Yg line step size when
in micro mode
number_of_pins npins Yh numbers of pins in
print-head
output_res_char orc Yi horizontal resolu-
tion in units per
line
output_res_horz_inch orhi Yk horizontal resolu-
tion in units per
inch
output_res_line orl Yj vertical resolution
in units per line
output_res_vert_inch orvi Yl vertical resolution
in units per inch
print_rate cps Ym print rate in char-
acters per second
wide_char_size widcs Yn character step size
when in double wide
mode
These are the string capabilities:
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |