ohci - OpenHCI host controller driver
usb@unit-address
The ohci driver is a USBA (Solaris USB Architecture) compliant nexus driver that supports the Open Host Controller Interface Specification 1.1, an industry standard developed by Compaq, Microsoft, and National Semiconductor.
The ohci driver supports bulk, interrupt, control and isochronous transfers.
/kernel/drv/ohci
/kernel/drv/amd64/ohci
/kernel/drv/sparcv9/ohci
/kernel/drv/ohci.conf
See attributes(5) for descriptions of the following attributes:
|
attributes(5), ehci(7D), hubd(7D), uhci(7D), usba(7D)
Writing Device Drivers
Universal Serial Bus Specification 2.0
Open Host Controller Interface Specification for USB 1.0a
System Administration Guide: Basic Administration
All host controller errors are passed to the client drivers. Root hub errors are documented in hubd(7D).
In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:
WARNING: <device path> <ohci><instance number>>: Error message...
Unrecoverable USB Hardware Error.
No SOF interrupts have been received. This OHCI USB controller is unusable.
The following messages may be entered into the system log. They are formatted in the following manner:
<device path> <ohci<instance number>): Message...
Failed to program frame interval register.
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |