Проект OpenNet: MAN openprom (7) Макропакеты и соглашения (FreeBSD и Linux)

Интерактивная система просмотра системных руководств (man-ов)

openprom (7)

>> openprom (7) ( Solaris man: Макропакеты и соглашения )

NAME

openprom - PROM monitor configuration
interface

SYNOPSIS

#include <sys/fcntl.h>

#include <sys/types.h>

#include <sys/openpromio.h>

open("/dev/openprom", mode);

DESCRIPTION

The internal encoding of the configuration information stored in EEPROM or NVRAM varies from model to model, and on some systems the encoding is "hidden" by the firmware. The openprom driver provides a consistent interface that allows a user or program to inspect and modify that configuration, using ioctl(2) requests. These requests are defined in <sys/openpromio.h>:

struct openpromio {
   uint_t  oprom_size;       /* real size of following data */
   union {
        char  b[1];          /* NB: Adjacent, Null terminated */
        int   i;
                                } opio_u;
};
#define oprom_array opio_u.b  /* property name/value array */
#define oprom_node opio_u.i   /* nodeid from navigation config-ops */
#define oprom_len opio_u.i    /* property len from OPROMGETPROPLEN */
#define OPROMMAXPARAM 32768   /* max size of array (advisory) */

For all ioctl(2) requests, the third parameter is a pointer to a struct openpromio. All property names and values are null-terminated strings; the value of a numeric option is its ASCII representation.

For the raw ioctl(2) operations shown below that explicitly or implicitly specify a nodeid, an error may be returned. This is due to the removal of the node from the firmware device tree by a Dynamic Reconfiguration operation. Programs should decide if the appropriate response is to restart the scanning operation from the beginning or terminate, informing the user that the tree has changed.

IOCTLS

OPROMGETOPT

: This ioctl takes the null-terminated name of a property in the oprom_array and returns its null-terminated value (overlaying its name). oprom_size should be set to the size of oprom_array; on return it will contain the size of the returned value. If the named property does not exist, or if there is not enough space to hold its value, then oprom_size will be set to zero. See BUGS below.

OPROMSETOPT

: This ioctl takes two adjacent strings in oprom_array; the null-terminated property name followed by the null-terminated value.

OPROMSETOPT2

: This ioctl is similar to OPROMSETOPT, except that it uses the difference between the actual user array size and the length of the property name plus its null terminator.

OPROMNXTOPT

: This ioctl is used to retrieve properties sequentially. The null-terminated name of a property is placed into oprom_array and on return it is replaced with the null-terminated name of the next property in the sequence, with oprom_size set to its length. A null string on input means return the name of the first property; an oprom_size of zero on output means there are no more properties.

OPROMNXT
OPROMCHILD
OPROMGETPROP
OPROMNXTPROP

: These ioctls provide an interface to the raw config_ops operations in the PROM monitor. One can use them to traverse the system device tree; see prtconf(1M).

OPROMGETPROPLEN

: This ioctl provides an interface to the property length raw config op. It takes the name of a property in the buffer, and returns an integer in the buffer. It returns the integer -1 if the property does not exist; 0 if the property exists, but has no value (a boolean property); or a positive integer which is the length of the property as reported by the PROM monitor. See BUGS below.

OPROMGETVERSION

: This ioctl returns an arbitrary and platform-dependent NULL-terminated string in oprom_array, representing the underlying version of the firmware.

ERRORS

EAGAIN

: There are too many opens of the /dev/openprom device.

EFAULT

: A bad address has been passed to an ioctl(2) routine.

EINVAL

: The size value was invalid, or (for OPROMSETOPT) the
property does not exist, or an invalid ioctl is being issued, or the ioctl is not supported by the firmware, or the nodeid specified does not exist in the firmware device tree.

ENOMEM

: The kernel could not allocate space to copy the user's structure.

EPERM

: Attempts have been made to write to a read-only entity, or read from a write only entity.

ENXIO

: Attempting to open a non-existent device.

EXAMPLES

Example 1 oprom_array Data Allocation and Reuse

The following example shows how the oprom_array is allocated and reused for data returned by the driver.

/*
* This program opens the openprom device and prints the platform
* name (root node name property) and the prom version.
*
* NOTE: /dev/openprom is readable only by user 'root' or group 'sys'.
*/
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/openpromio.h>
#define    min(a, b)    (a < b ? a : b)
#define    max(a, b)    (a > b ? a : b)
#define MAXNAMESZ 32          /* Maximum property *name* size */
#define BUFSZ 1024            /* A Handly default buffer size */
#define MAXVALSZ    (BUFSZ - sizeof (int))
static char *promdev = "/dev/openprom";
/*
* Allocate an openpromio structure big enough to contain
* a bufsize'd oprom_array. Zero out the structure and
* set the oprom_size field to bufsize.
*/
static struct openpromio *
opp_zalloc(size_t bufsize)
{
   struct openpromio *opp;
   opp = malloc(sizeof (struct openpromio) + bufsize);
   (void) memset(opp, 0, sizeof (struct openpromio) + bufsize);
   opp->oprom_size = bufsize;
   return (opp);
}
/*
* Free a 'struct openpromio' allocated by opp_zalloc
*/
static void
opp_free(struct openpromio *opp)
{
   free(opp);
}
/*
* Get the peer node of the given node.  The root node is the peer of zero.
* After changing nodes, property lookups apply to that node.  The driver
* 'remembers' what node you are in.
*/
static int
peer(int nodeid, int fd)
{
   struct openpromio *opp;
   int i;
   opp = opp_zalloc(sizeof (int));
   opp->oprom_node = nodeid;
   if (ioctl(fd, OPROMNEXT, opp) < 0) {
       perror("OPROMNEXT");
       exit(1);
   }
   i = opp->oprom_node;
   opp_free(opp);
   return(i);
}
int
main(void)
{
   struct openpromio *opp;
   int fd, proplen;
   size_t buflen;
   if ((fd = open(promdev, O_RDONLY)) < 0)  {
       fprintf(stderr, "Cannot open openprom device\n");
       exit(1);
   }
   /*
    * Get and print the length and value of the
    * root node 'name' property
    */
   (void) peer(0, fd);        /* Navigate to the root node */
   /*
    * Allocate an openpromio structure sized big enough to
    * take the string "name" as input and return the int-sized
    * length of the 'name' property.
    * Then, get the length of the 'name' property.
    */
   buflen = max(sizeof (int), strlen("name") + 1);
   opp = opp_zalloc(buflen);
   (void) strcpy(opp->oprom_array, "name");
   if (ioctl(fd, OPROMGETPROPLEN, opp) < 0) {
       perror("OPROMGETPROPLEN");
       /* exit(1); */
       proplen = 0;    /* down-rev driver? */
   } else
       proplen = opp->oprom_len;
   opp_free(opp);
   if (proplen == -1) {
       printf("'name' property does not exist!\n");
       exit (1);
   }
   /*
    * Allocate an openpromio structure sized big enough
    * to take the string 'name' as input and to return
    * 'proplen + 1' bytes.  Then, get the value of the
    * 'name' property. Note how we make sure to size the
    * array at least one byte more than the returned length
    * to guarantee NULL termination.
    */
   buflen = (proplen ? proplen + 1 : MAXVALSZ);
   buflen = max(buflen, strlen("name") + 1);
   opp = opp_zalloc(buflen);
   (void) strcpy(opp->oprom_array, "name");
   if (ioctl(fd, OPROMGETPROP, opp) < 0) {
       perror("OPROMGETPROP");
       exit(1);
   }
   if (opp->oprom_size != 0)
       printf("Platform name <%s> property len <%d>\n",
           opp->oprom_array, proplen);
   opp_free(opp);
   /*
    * Allocate an openpromio structure assumed to be
    * big enough to get the 'prom version string'.
    * Get and print the prom version.
    */
   opp_zalloc(MAXVALSZ);
   opp->oprom_size = MAXVALSZ;
   if (ioctl(fd, OPROMGETVERSION, opp) < 0) {
       perror("OPROMGETVERSION");
       exit(1);
   }
   printf("Prom version <%s>\n", opp->oprom_array);
   opp_free(opp);
   (void) close(fd);
   return (0);
}

FILES

/dev/openprom

: PROM monitor configuration interface

BUGS

There should be separate return values for non-existent properties as opposed to not enough space for the value.

An attempt to set a property to an illegal value results in the PROM setting it to some legal value, with no error being returned. An OPROMGETOPT should be performed after an OPROMSETOPT to verify that the set worked.

Some PROMS lie about the property length of some string properties, omitting the NULL terminator from the property length. The openprom driver attempts to transparently compensate for these bugs when returning property values by NULL terminating an extra character in the user buffer if space is available in the user buffer. This extra character is excluded from the oprom_size field returned from OPROMGETPROP and OPROMGETOPT and excluded in the oprom_len field returned from OPROMGETPROPLEN but is returned in the user buffer from the calls that return data, if the user buffer is allocated at least one byte larger than the property length.