The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ide-smart (8)
  • >> ide-smart (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    ide-smart - IDE SMART Checking tool
     
    

    SYNOPSIS

    ide-smart DEVICE [-iq10] [-d DEVICE] [--device=DEVICE] [--immediate] [--quiet-check] [--auto-on] [--auto-off]

    ide-smart [--help] [--version]  

    DESCRIPTION

    ide-smart performs and queries the results of various non destructive tests on a SMART capable IDE DEVICE. You must have a BIOS and hardware that supports it.

    SMART stands for Self-Monitoring, Analysis and Reporting Technology, which provides near future failure prediction monitoring different attributes (listed as Id) of the device. If a value of a particular Id (or attribute) is under a certain threshold, the device most probabily will be about to fail.

    There are two type of tests: online and offline. Online tests are periodically performed by the drive while it's being used, while offline tests can be performed only by manually starting an offline test.

    Each test also has a severity associated with it: Advisory and PreFailure. Advisory indicates a possible failure, and PreFailure a Predictable Failure which is an "sure" failure in the near future. Predictable failures ar characterized by a degradation of an attribute over time mostly corresponding to mechanic causes (for example head flying height degradation would indicate an impending head crash).

    The exact meaning of the attributes varies between manufacturers and even models, so it is impossible to decypher them (ranging through spin-up time to head flying height or throughput performance). At any rate, the value you should care upon is the last column, holding whether a test passed or failed.  

    OPTIONS

    -d DEVICE, --device=DEVICE
    Select the DEVICE on to which perform the tests or query.
    -i, --immediate
    Perform offline tests immediately. Any access to the device will temporarily suspend offline tests.
    -q, --quiet-check
    Outputs no messages. Returns a negative value indicating how many tests failed, 0 if all went ok, or a positive value if there was some error which wasn't a test failure.
    -1, --auto-on
    Starts offline tests (if any) on the device; wait about 30 minutes and run ide-smart again for results (time depends on the hard drive). Any access to the device will temporarily suspend offline tests.
    -0, --auto-off
    Ends offline test (if any) on the device.
     

    GNU STANDARD OPTIONS

    --help
    Print a usage message on standard output and exit successfully.
    --version
    Print version information on standard output, then exit successfully.
    --
    Terminate option list.
     

    AUTHOR

    Ragnar Hojland Espinosa <[email protected]>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    GNU STANDARD OPTIONS
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру