The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pg3 (8)
  • >> pg3 (8) ( Разные man: Команды системного администрирования )
  • pg3 (8) ( Русские man: Команды системного администрирования )
  •  

    NAME

    pg3, ipg, pgset - send stream of UDP packets
     
    

    SYNOPSIS

    source ipg

    pg

    pgset COMMAND

     

    DESCRIPTION

    ipg is not a program, it is script which should be sourced to bash. When sourced it loads module pg3 and exports a few of functions accessible from parent shell. These macros are pg to start packet injection and to get the results of run; and pgset to setup packet generator.

    pgset can send the following commands to module pg3:  

    COMMAND

    odev DEVICE
    Name of Ethernet device to test. See warning below.
    pkt_size BYTES
    Size of packet to generate. The size includes all the headers: UDP, IP, MAC, but does not account for overhead internal to medium, i.e. FCS and various paddings.
    frags NUMBER
    Each packet will contain NUMBER of fragments. Maximal amount for linux-2.4 is 6. Far not all the devices support fragmented buffers.
    count NUMBER
    Send stream of NUMBER of packets and stop after this.
    ipg TIME
    Introduce artificial delay between packets of TIME microseconds.
    dst IP_ADDRESS
    Select IP destination where the stream is sent to. Beware, never set this address at random. pg3 is not a toy, it creates really tough stream. Default value is 0.0.0.0.
    dst MAC_ADDRESS
    Select MAC destination where the stream is sent to. Default value is 00:00:00:00:00:00 in hope that this will not be received by any node on LAN.
    stop
    Abort packet injection.
     

    WARNING

    When output device is set to some random device different of hardware Ethernet device, pg3 will crash kernel.

    Do not use it on VLAN, ethertap, VTUN and other devices, which emulate Ethernet not being real Ethernet in fact.  

    AUTHOR

    pg3 was written by Robert Olsson <[email protected]>.  

    SECURITY

    This can be used only by superuser.

    This tool creates floods of packets which is unlikely to be handled even by high-end machines. For example, it saturates gigabit link with 60 byte packets when used with Intel's e1000. In face of such stream switches, routers and end hosts may deadlock, crash, explode. Use only in test lab environment.  

    AVAILABILITY

    pg3 is part of iputils package and the latest versions are available in source form for anonymous ftp ftp://ftp.inr.ac.ru/ip-routing/iputils-current.tar.gz.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    COMMAND
    WARNING
    AUTHOR
    SECURITY
    AVAILABILITY


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру