подскажите как нужно подключать ext2 linux`овые раэделы в OpenBSD.
пытаюсь это сделать так:

#mount -t ext2fs /dev/wd2a /new-disk

в ответ выдает device not configured
как не пробовал ничего не получается
посоветуйте конкретными примерами
буду очень признателен

смотрю #disklabel wd0
# /dev/rwd0c:
type: ESDI
disk: ESDI/IDE disk
label: IC35L040AVVN07-0
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 16383
total sectors: 80418240
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  a:  3072195 12289725    4.2BSD     1024  8192    16   # (Cyl. 12192*- 15239)
  b:   524160 15361920      swap                        # (Cyl. 15240 - 15759)
  c: 80418240        0    unused        0     0         # (Cyl.    0 - 79779)
  d:  3072384 15886080    4.2BSD     1024  8192    16   # (Cyl. 15760 - 18807)
  e:  2048256 18958464    4.2BSD     1024  8192    16   # (Cyl. 18808 - 20839)
  f:  3072384 21006720    4.2BSD     1024  8192    16   # (Cyl. 20840 - 23887)
  g:  5271651 24079104    4.2BSD     1024  8192    16   # (Cyl. 23888 - 29117*)
  i: 12289662       63   unknown                        # (Cyl.    0*- 12192*)
  j: 17864217 29350818   unknown                        # (Cyl. 29117*- 46840*)
  k: 16643277 47215098     MSDOS                        # (Cyl. 46840*- 63351*)
  l: 16546887 63858438     MSDOS                        # (Cyl. 63351*- 79767*)
-------------------
# disklabel wd2
-------------------
# /dev/rwd2c:
type: ESDI
disk: ESDI/IDE disk
label: WDC AC2635F    
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 1240
total sectors: 1249920
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0           # microseconds
track-to-track seek: 0  # microseconds
drivedata: 0

16 partitions:
#        size   offset    fstype   [fsize bsize   cpg]
  c:  1249920        0    unused        0     0         # (Cyl.    0 - 1239)
  i:  1171233       63    ext2fs                        # (Cyl.    0*- 1161)
  j:    78624  1171296   unknown                        # (Cyl. 1162 - 1239)

-------------------
смотрю  etc/disktab
-------------------
#       $OpenBSD: disktab,v 1.14 2001/01/28 23:31:28 niklas Exp $

# Disk geometry and partition layout tables.
# Key:
#       dt      controller type
#       ty      type of disk (fixed, removeable, simulated)
#       d[0-4]  drive-type-dependent parameters
#       ns      #sectors/track
#       nt      #tracks/cylinder
#       nc      #cylinders/disk
#       sc      #sectors/cylinder, ns*nt default
#       su      #sectors/unit, sc*nc default
#       se      sector size, DEV_BSIZE default
#       rm      rpm, 3600 default
#       sf      supports bad144-style bad sector forwarding
#       sk      sector skew per track, default 0
#       cs      sector skew per cylinder, default 0
#       hs      headswitch time, default 0
#       ts      one-cylinder seek time, default 0
#       il      sector interleave (n:1), 1 default
#       bs      boot block size, default BBSIZE
#       sb      superblock size, default SBSIZE
#       o[a-p]  partition offsets in sectors
#       p[a-p]  partition sizes in sectors
#       b[a-p]  partition block sizes in bytes
#       f[a-p]  partition fragment sizes in bytes
#       t[a-p]  partition types (filesystem, swap, etc)
#
# All partition sizes reserve space for bad sector tables.
# (5 cylinders needed for maintenance + replacement sectors)
#

qp120at|Quantum Peripherals 120MB IDE:\
        :dt=ESDI:ty=winchester:se#512:nt#9:ns#32:nc#813:sf: \
        :pa#13824:oa#0:ta=4.2BSD:ba#4096:fa#512: \
        :pb#13824:ob#13824:tb=swap: \
        :pc#234144:oc#0: \
        :ph#206496:oh#27648:th=4.2BSD:bh#4096:fh#512:

pan60|Panasonic Laptop's 60MB IDE:\
        :dt=ST506:ty=winchester:se#512:nt#13:ns#17:nc#565:\
        :pa#13260:oa#0:ta=4.2BSD:ba#4096:fa#512:\
        :pb#13260:ob#13260:tb=swap: \
        :pc#124865:oc#0: \
        :ph#97682:oh#26520:th=4.2BSD:bh#4096:fh#512:

mk156|toshiba156|Toshiba MK156 156Mb:\
        :dt=SCSI:ty=winchester:se#512:nt#10:ns#35:nc#825:\
        :pa#15748:oa#0:ba#4096:fa#512:ta=4.2BSD:\
        :pb#15748:ob#15748:tb=swap:\
        :pc#288750:oc#0:\
        :ph#257250:oh#31500:bh#4096:fh#512:th=4.2BSD:  

cp3100|Conner Peripherals 100MB IDE:\
        :dt=ST506:ty=winchester:se#512:nt#8:ns#33:nc#766: \
        :pa#12144:oa#0:ta=4.2BSD:ba#4096:fa#512: \
        :pb#12144:ob#12144:tb=swap: \
        :pc#202224:oc#0: \
        :ph#177936:oh#24288:th=4.2BSD:bh#4096:fh#512:

# a == root
# b == swap
# c == whole disk
# e == /var
# f == scratch
# h == /usr

cp3100new|Conner Peripherals 100MB IDE, with a different configuration:\
        :dt=ST506:ty=winchester:se#512:nt#8:ns#33:nc#766: \
        :pa#15840:oa#0:ta=4.2BSD:ba#4096:fa#512: \
        :pb#24288:ob#15840:tb=swap: \
        :pc#202224:oc#0: \
        :pe#15840:oe#40128:te=4.2BSD:be#4096:fe#512: \
        :pg#15840:og#55968:tg=4.2BSD:bg#4096:fg#512: \
        :ph#130416:oh#71808:th=4.2BSD:bh#4096:fh#512:

floppy288|3in|3.5in High Density Floppy, 2.88MB:\
        :dt=floppy:ty=floppy:se#512:nt#2:rm#300:ns#36:nc#80:\
        :pa#5760:oa#0:ba#4096:fa#512:ta=4.2BSD: \
        :pb#5760:ob#0:\
        :pc#5760:oc#0:

floppy|floppy3|3in|3.5in High Density Floppy:\
        :dt=floppy:ty=floppy:se#512:nt#2:rm#300:ns#18:nc#80:\
        :pa#2880:oa#0:ba#4096:fa#512:ta=4.2BSD: \
        :pb#2880:ob#0:\
        :pc#2880:oc#0:

floppy5|5in|5.25in High Density Floppy:\
        :dt=floppy:ty=floppy:se#512:nt#2:rm#300:ns#15:nc#80:\
        :pa#2400:oa#0:ba#4096:fa#512:ta=4.2BSD: \
        :pb#2400:ob#0:bb#4096:fb#512:\
        :pc#2400:oc#0:bc#4096:fc#512:

maxtor4380|Maxtor XT4380E ESDI :\
        :dt=ESDI:ty=winchester:se#512:nt#15:ns#36:nc#1222:sf: \
        :pa#21600:oa#0:ta=4.2BSD:ba#4096:\
        :pb#21600:ob#21600:tb=swap: \
        :pc#659880:oc#0: \
        :pe#216000:oe#53200:te=4.2BSD:be#4096:fe#512: \
        :ph#398520:oh#269200:th=4.2BSD:bh#4096:fh#512:

miniscribe9380|compaq38|Miniscribe 9380 ESDI :\
        :ty=winchester:dt=ESDI:se#512:nt#15:ns#35:nc#1223:rm#3600:sf: \
        :pa#21000:oa#0:ba#8192:fa#1024:ta=4.2BSD: \
        :pb#42000:ob#21000:tb=swap: \
        :pc#642075:oc#0: \
        :pe#21000:oe#63000:be#8192:fe#1024:te=4.2BSD: \
        :ph#556500:oh#84000:bh#8192:fh#1024:th=4.2BSD:

ida4|compaq88|Compaq IDA (4 drives) :\
        :ty=winchester:dt=IDA:se#512:nt#16:ns#63:nc#1644:rm#3600:\
        :pa#20160:oa#0:ba#8192:fa#1024:ta=4.2BSD: \
        :pb#80640:ob#20160:tb=swap: \
        :pc#1659168:oc#0: \
        :pe#201600:oe#100800:be#8192:fe#1024:te=4.2BSD: \
        :pf#20160:of#1310400:bf#8192:ff#1024:tf=4.2BSD: \
        :ph#1008000:oh#302400:bh#8192:fh#1024:th=4.2BSD: \
        :pg#302400:og#1330560:bg#4096:fg#512:tg=4.2BSD:

fuji513|Fujitsu M22XXXX: \
        :ty=winchester:dt=ESDI:se#512:nt#16:ns#63:nc#954:rm#3600:\
        :pa#20160:oa#82656:ba#4096:fa#512:ta=4.2BSD: \
        :pb#40320:ob#102816:tb=swap: \
        :pc#961632:oc#0: \
        :ph#656208:oh#143136:bh#4096:fh#512:th=4.2BSD:

rdroot|ramdiskroot|RAM-disk root FS image:\
        :ty=ramdisk:se#512:nt#2:ns#128:nc#16:\
        :pa#3510:oa#0:ta=4.2BSD:ba#4096:fa#512:\
        :pb#0:ob#0:tb=swap:\
        :pc#3510:oc#0:

• RE: Так Вы прбовали, как я предлагал, или нет?, SergeiZz, 10:12 , 13-Фев-03, (1)
  • RE: Так Вы прбовали, как я предлагал, или нет?, bellser, 10:27 , 13-Фев-03, (2)