forum.opennet.ru - "RE: После установки RedHat 8.0 " (3)

форумы

помощь

поиск

регистрация

майллист

ВХОД

слежка

"RE: После установки RedHat 8.0 "

Форумы OpenNET: Виртуальная конференция (Public)
Вариант для распечатки		Архивированная нить - только для чтения! Пред. тема \| След. тема
Изначальное сообщение		[Проследить за развитием треда]

"RE: После установки RedHat 8.0 "
Сообщение от hiJ on 23-Апр-03, 06:41 (MSK)
После установки RedHat 8.0 не может протестировать X конфигурацию. Хотя видеокарту распознаёт верно. Монитор как не известный. После чего грузится только в текстовом режиме. (монитор - Alpha Scan 511, видео - S3 Trio V64). До этого RedHat 6.2 Ставился и грузился без проблем. Может кто подскажет в чем дело ??? А то начинающему работать с консоли не просто - не зная броду :)
	Рекомендовать в FAQ \| Cообщить модератору \| Наверх

Оглавление

RE: После установки RedHat 8.0 , Aleksey, 09:31 , 24-Апр-03, (1)
- RE: После установки RedHat 8.0 , hiJ, 12:44 , 27-Апр-03, (2)
  - RE: После установки RedHat 8.0, Aleksey, 09:19 , 28-Апр-03, (3)

Индекс форумов | Темы | Пред. тема | След. тема

Сообщения по теме

1. "RE: После установки RedHat 8.0 "

Сообщение от Aleksey on 24-Апр-03, 09:31  (MSK)

>После установки RedHat 8.0 не может протестировать X конфигурацию. Хотя видеокарту распознаёт
>верно. Монитор как не известный. После чего грузится только в текстовом
>режиме. (монитор - Alpha Scan 511, видео - S3 Trio V64).
>До этого RedHat 6.2 Ставился и грузился без проблем. Может кто
>подскажет в чем дело ??? А то начинающему работать с консоли
>не просто - не зная броду :)
Xlog в студию !

Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "RE: После установки RedHat 8.0 "

Сообщение от hiJ on 27-Апр-03, 12:44  (MSK)

Xlog в студию !
   ВЫКЛАДЫВАЮ ЛОГ МОЖЕТ ПОДСКАЖЕТ РЕШЕНИЕ ПРОБЛЕМЫ
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com

Module Loader present
OS Kernel: Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Apr 27 11:33:10 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "S3 Trio64V2 (generic)"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0586 card 1106,0000 rev 41 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:3: chip 1106,3040 card 0000,0000 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:0f:0: chip 5333,8901 card 5333,8901 rev 16 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x04 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:15:0) S3 Trio64V2/DX or /GX rev 22, Mem @ 0xe4000000/26, BIOS @ 0xe8000000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[1] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B)
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[3] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[1] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B)
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[3] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[6] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B)
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+
(II) Primary Device is: PCI 00:0f:0
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "RE: После установки RedHat 8.0"

Сообщение от Aleksey on 28-Апр-03, 09:19  (MSK)

(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
> Trio32/64, Aurora64V+
>(II) Primary Device is: PCI 00:0f:0
>(--) Assigning device section with no busID to primary device
>(EE) No devices detected.
>
>Fatal server error:
>no screens found
>
>When reporting a problem related to a server crash, please send
>the full server output, not just the last messages.
>This can be found in the log file "/var/log/XFree86.0.log".
>Please report problems to xfree86@xfree86.org.

Ну насколько я вижу сервер на чистом Инглише заявляет что он не могёт найти видео карту ,собственно с настройкой S3 всегда были проблемы ...
Для начала зайди в XF86Config и если найдёшь строчку PCI 00:0f:0 или чтото вроде неё попробуй закоментировать ,не поможет посмотри на своей карте номер чипсета ,запусти конфигуратор и ручками укажи его - не делай автодетект ! (не забудь бекапнуть файл перед внесением изменений !)
Не поможет - читай доки ,на тему настройки S3 их в Нэте просто завались !

Рекомендовать в FAQ | Cообщить модератору | Наверх

Удалить

Индекс форумов | Темы | Пред. тема | След. тема

Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру

1. "RE: После установки RedHat 8.0 "
Сообщение от Aleksey on 24-Апр-03, 09:31 (MSK)
>После установки RedHat 8.0 не может протестировать X конфигурацию. Хотя видеокарту распознаёт >верно. Монитор как не известный. После чего грузится только в текстовом >режиме. (монитор - Alpha Scan 511, видео - S3 Trio V64). >До этого RedHat 6.2 Ставился и грузился без проблем. Может кто >подскажет в чем дело ??? А то начинающему работать с консоли >не просто - не зная броду :) Xlog в студию !
	Рекомендовать в FAQ \| Cообщить модератору \| Наверх


	2. "RE: После установки RedHat 8.0 "
	Сообщение от hiJ on 27-Апр-03, 12:44 (MSK)
	Xlog в студию ! ВЫКЛАДЫВАЮ ЛОГ МОЖЕТ ПОДСКАЖЕТ РЕШЕНИЕ ПРОБЛЕМЫ XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Apr 27 11:33:10 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Anaconda Configured" () \|-->Screen "Screen0" (0) () \| \|-->Monitor "Monitor0" () \| \|-->Device "S3 Trio64V2 (generic)" () \|-->Input Device "Mouse0" () \|-->Input Device "Mouse1" () \|-->Input Device "Keyboard0" () Option "XkbRules" "xfree86" () XKB: rules: "xfree86" () Option "XkbModel" "pc105" () XKB: model: "pc105" () Option "XkbLayout" "us" () XKB: layout: "us" (==) Keyboard: CustomKeycode disabled () FontPath set to "unix/:7100" (*) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0586 card 1106,0000 rev 41 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:3: chip 1106,3040 card 0000,0000 rev 10 class 06,00,00 hdr 00 (II) PCI: 00:0f:0: chip 5333,8901 card 5333,8901 rev 16 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x04 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B] [1] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B] [2] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B] [3] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus -1 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:(0:15:0) S3 Trio64V2/DX or /GX rev 22, Mem @ 0xe4000000/26, BIOS @ 0xe8000000/16 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] [1] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B) [2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [3] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] [1] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B) [2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [3] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] [6] -1 0xe8000000 - 0xe800ffff (0x10000) MX[B](B) [7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B) [8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [9] -1 0x00000000 - 0x000000ff (0x100) IX[B] [10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.1.10 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "s3" (II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o (II) Module s3: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.3.5 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, Trio32/64, Aurora64V+ (II) Primary Device is: PCI 00:0f:0 (--) Assigning device section with no busID to primary device (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to xfree86@xfree86.org.
		Рекомендовать в FAQ \| Cообщить модератору \| Наверх


	3. "RE: После установки RedHat 8.0"
	Сообщение от Aleksey on 28-Апр-03, 09:19 (MSK)
	(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, > Trio32/64, Aurora64V+ >(II) Primary Device is: PCI 00:0f:0 >(--) Assigning device section with no busID to primary device >(EE) No devices detected. > >Fatal server error: >no screens found > >When reporting a problem related to a server crash, please send >the full server output, not just the last messages. >This can be found in the log file "/var/log/XFree86.0.log". >Please report problems to xfree86@xfree86.org. Ну насколько я вижу сервер на чистом Инглише заявляет что он не могёт найти видео карту ,собственно с настройкой S3 всегда были проблемы ... Для начала зайди в XF86Config и если найдёшь строчку PCI 00:0f:0 или чтото вроде неё попробуй закоментировать ,не поможет посмотри на своей карте номер чипсета ,запусти конфигуратор и ручками укажи его - не делай автодетект ! (не забудь бекапнуть файл перед внесением изменений !) Не поможет - читай доки ,на тему настройки S3 их в Нэте просто завались !
		Рекомендовать в FAQ \| Cообщить модератору \| Наверх