Проблема такова..
С косоли киски пропускает пользователя.

  modcall[authorize]: module "ldap" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type LDAP
auth: type "LDAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authtype for request 0
rlm_ldap: - authenticate
rlm_ldap: login attempt by "test" with password "test"
rlm_ldap: user DN: uid=test,ou=users,ou=radius,dc=citvil,dc=edu
rlm_ldap: (re)connect to localhost:389, authentication 1
rlm_ldap: bind as uid=test,ou=users,ou=radius,dc=citvil,dc=edu/test to localhost:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: user test authenticated succesfully
  modcall[authenticate]: module "ldap" returns ok for request 0
modcall: group authtype returns ok for request 0
Login OK: [test/test] (from client dialup port 0)
Sending Access-Accept of id 16 to 192.168.7.13:1645
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 192.168.7.13:1646, id=17, length=78
        NAS-IP-Address = 192.168.7.13
        NAS-Port = 0
        NAS-Port-Type = Async
        User-Name = "test"
        Acct-Status-Type = Start
        Acct-Authentic = RADIUS
        Service-Type = NAS-Prompt-User
        Acct-Session-Id = "00000003"
        Acct-Delay-Time = 0
rad_rmspace_pair:  User-Name now 'test'
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 1
  modcall[preacct]: module "preprocess" returns noop for request 1
    rlm_realm: No '@' in User-Name = "test", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[preacct]: module "suffix" returns noop for request 1
  modcall[preacct]: module "files" returns noop for request 1
modcall: group preacct returns noop for request 1
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 1

а вот диалапных и с телнета на киско:

  modcall[authorize]: module "ldap" returns ok for request 1
modcall: group authorize returns ok for request 1
  rad_check_password:  Found Auth-Type LDAP
auth: type "LDAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authtype for request 1
rlm_ldap: - authenticate
rlm_ldap: login attempt by "test" with password "test"
rlm_ldap: user DN: uid=test,ou=users,ou=radius,dc=citvil,dc=edu
rlm_ldap: (re)connect to localhost:389, authentication 1
rlm_ldap: bind as uid=test,ou=users,ou=radius,dc=citvil,dc=edu/test to localhost:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: user test authenticated succesfully
  modcall[authenticate]: module "ldap" returns ok for request 1
modcall: group authtype returns ok for request 1
Login OK: [test/test] (from client dialup port 3)
Sending Access-Accept of id 15 to 192.168.7.13:1645
Finished request 1

и дык кидает...
Настраиваю по ldap_howto.txt из freeradius 1.0.0pre3

• Проблема с Freeradius + OpenLDAP, ned, 13:08 , 09-Июл-04, (1)