форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Архивированная нить - только для чтения!  Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[Проследить за развитием треда]

"mrtg"
Сообщение от avn (??) on 30-Мрт-05, 20:16  (MSK)
Hi All! Не ставится mrtg-2.11.1 на Редхат 9.0. ./configure --prefix=/usr/local/mrtg-2 заканчивается: ** Ooops, one of many bad things happened:    a)  You don't have the GD library installed.        Get it from http://www.boutell.com, compile it and        use either --with-gd-lib=DIR and --with-gd-inc=DIR to specify        its location. You might also have to use --with-z-inc,              --with-z-lib and --with-png-inc, --with-png-lib for gd              versions 1.6 and higher.  Check config.log for more        information on the problem.    b)  You have the GD library installed, but not the gd.h        header file.  Download the source (see above) and use        --with-gd-inc=DIR to specify where the file can be found.    c)  You have the library and the header file installed, but        you also have a shared GD library in the same directory.        Remove the shared library files and/or links (e.g.        libgd.so.2.0.0, libgd.so and libgd.so.2).  This is especially              likely if you're using a recent (post 1.8.4) version of GD        and didn't configure it with --disable-shared.    d)  You have gd library installed and also it's headers, but you are        missing libpng (and headers) or freetype (and headers)        (mrtg does not use freetype, but if your copy of gd is precompiled        against it, you have to install it ... Все требуемые пакеты zlib, libpng, gd-1.8.4 стоят. Чего ему еще не хватает?
	Рекомендовать в FAQ | Cообщить модератору | Наверх

Индекс форумов | Темы | Пред. тема | След. тема

Сообщения по теме

1. "mrtg"
Сообщение от Hamm on 31-Мрт-05, 08:24  (MSK)
>Hi All! >Не ставится mrtg-2.11.1 на Редхат 9.0. >./configure --prefix=/usr/local/mrtg-2 заканчивается: >** Ooops, one of many bad things happened: >   a)  You don't have the GD library installed. > >       Get it from http://www.boutell.com, compile >it and >       use either --with-gd-lib=DIR and --with-gd-inc=DIR >to specify >       its location. You might also >have to use --with-z-inc, >             > --with-z-lib and --with-png-inc, --with-png-lib for gd >             > versions 1.6 and higher.  Check config.log for more >       information on the problem. >   b)  You have the GD library installed, but >not the gd.h >       header file.  Download the >source (see above) and use >       --with-gd-inc=DIR to specify where the >file can be found. >   c)  You have the library and the header >file installed, but >       you also have a shared >GD library in the same directory. >       Remove the shared library files >and/or links (e.g. >       libgd.so.2.0.0, libgd.so and libgd.so.2).   >This is especially >             > likely if you're using a recent (post 1.8.4) version of >GD >       and didn't configure it with >--disable-shared. >   d)  You have gd library installed and also >it's headers, but you are >       missing libpng (and headers) or >freetype (and headers) >       (mrtg does not use freetype, >but if your copy of gd is precompiled >       against it, you have to >install it ... >Все требуемые пакеты zlib, libpng, gd-1.8.4 стоят. Чего ему еще не хватает? > Апача сам собирал?
	Рекомендовать в FAQ | Cообщить модератору | Наверх

Удалить

Индекс форумов | Темы | Пред. тема | След. тема

Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.