login.config
-------------------------------------------------------------------------
# login.config
#
# This is a sample "login dispatcher" configuration file for mgetty
#
# Format:
# username userid utmp_entry login_program [arguments]
#
# Meaning:
# for a "username" entered at mgettys login: prompt, call
# "login_program" with [arguments], with the uid set to "userid",
# and a USER_PROCESS utmp entry with ut_user = "utmp_entry"
#
# username may be prefixed / suffixed by "*" (wildcard)
#
# userid is a valid user name from /etc/passwd, or "-" to not set
# a login user id and keep the uid/euid root (needed for /bin/login)
#
# utmp_entry is what will appear in the "who" listing. Use "-" to not
# set an utmp entry (a must for /bin/login), use "@" to set it to the
# username entered. Maximum length is 8 characters.
#
# login_program is the program that will be exec()ed, with the arguments
# passed in [arguments]. A "@" in the arguments will be replaced with the
# username entered. Warning: if no "@" is given, the login_program has
# no way to know what user name the user entered.
#
#
# SAMPLES:
# Use this one with my Taylor-UUCP and Taylor-UUCP passwd files.
# (Big advantage: tuucp can use the same passwd file for serial dial-in
# and tcp dial-in [uucico running as in.uucpd]). Works from 1.05 up.
#
#U* uucp @ /usr/sbin/uucico -l -u @#
# Use this one for fido calls (login name /FIDO/ is handled specially)
#
# You need Eugene Crosser's "ifmail" package for this to work.
# mgetty has to be compiled with "-DFIDO", otherwise a fido call won't
# be detected.
#
#/FIDO/ uucp fido /usr/local/lib/fnet/ifcico @
#
# Automatic PPP startup on receipt of LCP configure request (AutoPPP).
# mgetty has to be compiled with "-DAUTO_PPP" for this to work.
# Warning: Case is significant, AUTOPPP or autoppp won't work!
# Consult the "pppd" man page to find pppd options that work for you.
#
# NOTE: for *some* users, the "-detach" option has been necessary, for
# others, not at all. If your pppd doesn't die after hangup, try it.
#
# NOTE2: "debug" creates lots of debugging info. LOOK AT IT if things
# do not work out of the box, most likely it's a ppp problem!
#
# NOTE3: "man pppd" is your friend!
#
# NOTE4: max. 9 arguments allowed.
#
/AutoPPP/ - a_ppp /usr/sbin/pppd auth refuse-chap require-pap login debug
#/AutoPPP/ - a_ppp /usr/sbin/pppd auth require-chap login debug
#
#
# An example where no login name in the argument list is desired:
# automatically telnetting to machine "smarty" for a given login name
#
#telnet-smarty gast telnet /usr/bin/telnet -8 smarty
#
# This is the "standard" behaviour - *dont* set a userid or utmp
# entry here, otherwise /bin/login will fail!
# This entry isn't really necessary: if it's missing, the built-in
# default will do exactly this.
#
* - - /bin/login @
-----------------------------------------------------------------------
два файла options и options.ttySHCF0
--------------------------------------------------------------
# /etc/ppp/options
#
# Not every option is listed here, see man pppd for more details.
# This file is read by the pppd,
# it is an error when it is not present.
#
# use the following command to see the active options:
#
# grep -v ^# /etc/ppp/options | grep -v ^$
#
# ---<Start of File>---
# The name of this server. Often, the FQDN is used here.
#name matek
# Enforce the use of the hostname as the name of the local system for
# authentication purposes (overrides the name option).
#usehostname
# If no local IP address is given, pppd will use the first IP address
# that belongs to the local hostname. If "noipdefault" is given, this
# is disabled and the peer will have to supply an IP address.
#noipdefault
# With this option, pppd will accept the peer's idea of our local IP
# address, even if the local IP address was specified in an option.
#ipcp-accept-local
# With this option, pppd will accept the peer's idea of its (remote) IP
# address, even if the remote IP address was specified in an option.
#ipcp-accept-remote
# Run the executable or shell command specified after pppd has terminated
# the link. This script could, for example, issue commands to the modem
# to cause it to hang up if hardware modem control signals were not
# available.
# If mgetty is running, it will reset the modem anyway. So there is no need
# to do it here.
#disconnect "chat -- \d+++\d\c OK ath0 OK"
# Increase debugging level (same as -d). The debug output is written
# to syslog LOG_LOCAL2.
#debug
# Enable debugging code in the kernel-level PPP driver. The argument n
# is a number which is the sum of the following values: 1 to enable
# general debug messages, 2 to request that the contents of received
# packets be printed, and 4 to request that the contents of transmitted
# packets be printed.
#kdebug n
# noauth means do not require the peer to authenticate itself, this must
# be set if you want to use pppd to connect to the internet. In this case
# *you* must authenicate yourself to the peer(internet provider), so do
# not disable this setting unless you are the dial-in server which where
# the peer has to autenticate to.
#noauth
# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
# on the serial port.
crtscts
# Specifies that pppd should use a UUCP-style lock on the serial device
# to ensure exclusive access to the device.
lock
# Use the modem control lines.(is default)
modem
# The opposite: local
#
# Description:
# Don't use the modem control lines. With this
# option, pppd will ignore the state of the CD (Car
# rier Detect) signal from the modem and will not
# change the state of the DTR (Data Terminal Ready)
# signal.
#
# You need to disable modem and enable local if you want to connect
# to anoter system without using a modem:
#local
# async character map -- 32-bit hex; each bit is a character
# that needs to be escaped for pppd to receive it. 0x00000001
# represents '\x01', and 0x80000000 represents '\x1f'.
# To allow pppd to work over a rlogin/telnet connection, ou should escape
# XON (^Q), XOFF (^S) and ^]: (The peer should use "escape ff".)
#asyncmap 200a0000
asyncmap 0
# needed for some ISDN Terminaladaters, namely ELSA, those seem to have
# problems with asyncmap negotiation, so you can turn off this procedure
# in case your ISDN box has trouble with it, by enabling this option.
# You have to disable the asyncmap <x> option to be sure to have it
# active. If you use wvdial, set the ISDN parameter in /etc/wvdial.conf
# instead.
#default-asyncmap
# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
# will ask the peer to send packets of no more than <n> bytes. The
# minimum MRU value is 128. The default MRU value is 1500. A value of
# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
# bytes of data). The value 1492 is for DSL connections (PPP Default -
# PPPoE Header: 1500 - 8 = 1492)
# mru 1492
# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
# requests a smaller value via MRU negotiation, pppd will request that
# the kernel networking code send data packets of no more than n bytes
# through the PPP network interface. The value 1492 is for DSL connections
# (PPP Default - PPPoE Header: 1500 - 8 = 1492)
# mtu 1492
# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
# notation (e.g. 255.255.255.0).
netmask 255.255.255.0
# Don't fork to become a background process (otherwise pppd will do so
# if a serial device is specified).
nodetach
# If this option is given, pppd will send an LCP echo-request frame to
# the peer every n seconds. Under Linux, the echo-request is sent when
# no packets have been received from the peer for n seconds. Normally
# the peer should respond to the echo-request by sending an echo-reply.
# This option can be used with the lcp-echo-failure option to detect
# that the peer is no longer connected.
lcp-echo-interval 30
# If this option is given, pppd will presume the peer to be dead if n
# LCP echo-requests are sent without receiving a valid LCP echo-reply.
# If this happens, pppd will terminate the connection. Use of this
# option requires a non-zero value for the lcp-echo-interval parameter.
# This option can be used to enable pppd to terminate after the physical
# connection has been broken (e.g., the modem has hung up) in
# situations where no hardware modem control lines are available.
lcp-echo-failure 4
# Send up to 60 LCP configure-request during negotiation. With a value
# of 2 for lcp-restart below, this might take up to 2 minutes.
lcp-max-configure 60
# Resend unanswered LCP requests after 2 seconds.
lcp-restart 2
# Specifies that pppd should disconnect if the link is idle for n seconds.
idle 600
# Specifies the maximal number of attempts to connect to the server. This
# is useful for dial on demand. Default value is 10.
#maxfail 3
# Disable the IPXCP and IPX protocols.
noipx
#-------------------------------------------------------------------------
# The next two options are only interesting for you if you are admin of
# a system with other users that use ppp, and those users are normally
# never allowed to add default route, or you do not want users to
# replace the default route.
#-------------------------------------------------------------------------
# enable this to prevent users from attempting to add a default route.
# Use this option with caution: If the user needs to use a program like
# wvdial, he will not be able to connect because wvdial forces defaulroute
# but this is rejected by this option and the user will not be able to
# connect to the internet.
nodefaultroute
# enable this to prevent users from replacing an existing default route.
#noreplacedefaultroute
#-------------------------------------------------------------------------
# All options below only make sense if you configure pppd to be a dial-in
# server, so don't touch these if you want dial into your provider with
# PPP!
#-------------------------------------------------------------------------
# Set the assumed name of the remote system for authentication purposes
# to <n>.
remotename <alex>
# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system. {proxyarp,noproxyarp}
#proxyarp
# Use the system password database for authenticating the peer using
# PAP. Note: mgetty already provides this option. If this is specified
# then dialin from users using a script under Linux to fire up ppp wont work.
login
# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
# Two Servers can be remotely configured
ms-dns 195.112.x.x
#ms-dns 192.168.1.2
# Specify which WINS Servers the incoming connection Win95 or WinNT should use
#ms-wins 192.168.1.50
#ms-wins 192.168.1.51
# ---<End of File>---
#
# Not every option was listed here, see man pppd for more details.
# This file is read by the pppd,
# it IS an error when it is NOT present.
#
# use the following command to see the active options:
#
# grep -v ^# /etc/ppp/options | grep -v ^$
#
###
debug 8
--------------------------------------------------
lock
debug 8
login
auth
modem
crtscts
refuse-chap
require-pap
mtu 576
mru 576
proxyarp
ms-dns 195.112.x.x