Хочу поднять впн сервер с авторизацией на радиусе.
Вроде делал всё как всегда:
mpd.conf
----
default:
        load pptp0
        load pptp1
pptp0:
        new -i ng0 pptp0 pptp0
        set ipcp ranges 172.16.100.1/32 172.16.100.2/32
        load pptp_standart

pptp1:
        new -i ng1 pptp1 pptp1
        set ipcp ranges 172.16.100.1/32 172.16.100.3/32
        load pptp_standart

pptp_standart:
        set iface disable on-demand
        set iface enable tcpmssfix
        set bundle enable multilink
        set link yes acfcomp protocomp
        set link no pap chap
        set link enable chap
        set link keep-alive 60 180
        set ipcp yes vjcomp
        set ipcp dns 172.16.100.1
        set iface enable proxy-arp
        set bundle enable compression
        set ccp yes mppc
        set ccp yes mpp-e40
        set ccp yes mpp-e56
        set ccp yes mpp-e128
        set ccp yes mpp-stateless
        set bundle yes crypt-reqd
        set pptp self 0.0.0.0
        set pptp enable incoming
        set pptp disable originate
        set radius server 127.0.0.1 password 1812 1813
        set radius timeout 10
        set radius config /usr/local/etc/radius.conf
        set radius retries 3
        set bundle enable radius-acct
        set bundle enable radius-auth
        set ipcp yes radius-ip
        open
----

mpd.links
----
pptp0:
    set link type pptp

pptp1:
    set link type pptp
----

uname -a:
----
4.11-RELEASE FreeBSD 4.11-RELEASE #0: Tue Nov  1 15:48:00 KRAT 2005     root@temp.local:/usr/src/sys/compile/ROUTER  i386

В логах:
----
Nov  3 13:17:19 temp mpd: [pptp0] device: OPEN event in state DOWN
Nov  3 13:17:19 temp mpd: [pptp0] pausing 2 seconds before open
Nov  3 13:17:19 temp mpd: [pptp0] device is now in state DOWN
Nov  3 13:17:21 temp mpd: [pptp0] device: OPEN event in state DOWN
Nov  3 13:17:21 temp mpd: [pptp0] pptp originate option is not enabled
Nov  3 13:17:21 temp mpd: [pptp0] device is now in state OPENING
Nov  3 13:17:21 temp mpd: [pptp0] device: DOWN event in state OPENING
Nov  3 13:17:21 temp mpd: [pptp0] device is now in state DOWN
Nov  3 13:17:21 temp mpd: [pptp0] link: DOWN event
Nov  3 13:17:21 temp mpd: [pptp0] LCP: Down event
Nov  3 13:17:21 temp mpd: [pptp0] device: OPEN event in state DOWN
Nov  3 13:17:21 temp mpd: [pptp0] pausing 7 seconds before open
Nov  3 13:17:21 temp mpd: [pptp0] device is now in state DOWN
Nov  3 13:17:27 temp mpd: [pptp1] device: OPEN event in state DOWN
Nov  3 13:17:27 temp mpd: [pptp1] pptp originate option is not enabled
Nov  3 13:17:27 temp mpd: [pptp1] device is now in state OPENING
Nov  3 13:17:27 temp mpd: [pptp1] device: DOWN event in state OPENING
Nov  3 13:17:27 temp mpd: [pptp1] device is now in state DOWN
Nov  3 13:17:27 temp mpd: [pptp1] link: DOWN event
Nov  3 13:17:27 temp mpd: [pptp1] LCP: Down event
Nov  3 13:17:27 temp mpd: [pptp1] device: OPEN event in state DOWN
Nov  3 13:17:27 temp mpd: [pptp1] pausing 9 seconds before open
Nov  3 13:17:28 temp mpd: [pptp1] device is now in state DOWN
----
Раньше всё работало. Но раньше ставил только на 4.10. Просветите, где я гоню?
P.S. mpd ставил из портов, предварительно накатив свежие...

• Проблема с mpd, MoHaX, 11:44 , 03-Ноя-05, (1)