Здравствуйте!
Поставил mgetyy-1.1.33 из портов. Вот такие конфиги:
login.conf:
/AutoPPP/       -       a_ppp   /usr/sbin/pppd file /etc/ppp/options.modem

mgetty.conf:
debug  9
fax-id  00 00 000000
speed  57600
direct  NO
blocking  NO
port-owner  uucp
port-group  uucp
port-mode  0660
toggle-dtr  YES
toggle-dtr-waittime  1500
data-only  YES
fax-only  NO
modem-type  auto
init-chat  "" ATS0=0Q0&D3&C1&M0&L0 OK
modem-check-time  3600
rings  1
answer-chat  "" ATA CONNECT \c \r
answer-chat-timeout  120
autobauding  NO
ringback  NO
ringback-time  30
ignore-carrier  false
issue-file /etc/issue
prompt-waittime  1500
login-prompt  @!login:
login-time  240
diskspace  2048
notify  faxadmin
fax-owner  uucp
fax-group  modem
fax-mode  0660

options.modem:
modem
noipdefault
nodetach
debug
noccp
proxyarp
crtscts
ms-dns 192.168.1.2
idle 1000
require-pap
refuse-chap

options.cuaa0:
192.168.1.1:192.168.1.253

pap-secrets:
antony * passowrd *

Лог mgetty выглядит весьма странно, например так:
11/30 20:28:26 aa0  mgetty: experimental test release 1.1.31-Jul24
11/30 20:28:26 aa0  check for lockfiles
11/30 20:28:26 aa0   checklock: no active process has lock, will remove
11/30 20:28:26 aa0  locking the line
11/30 20:28:26 aa0   makelock(cuaa0) called
11/30 20:28:26 aa0   do_makelock: lock='/var/spool/lock/LCK..cuaa0'
11/30 20:28:26 aa0   lock made
11/30 20:28:27 aa0   tio_get_rs232_lines: status: RTS CTS DSR DTR
11/30 20:28:27 aa0  lowering DTR to reset Modem
11/30 20:28:27 aa0   tss: set speed to 38400 (113000)
11/30 20:28:27 aa0   tio_set_flow_control( HARD )
11/30 20:28:27 aa0   waiting for line to clear (VTIME=1), read:
11/30 20:28:27 aa0  send: ATS0=0Q0&D3&C1&M0&L0[0d]
11/30 20:28:27 aa0  waiting for ``OK''
11/30 20:28:27 aa0   got: ATS0=0Q0&D3&C1&M0&L0[0d]
11/30 20:28:27 aa0    CND: ATS0=0Q0&D3&C1&M0&L0[0d][0a]OK ** found **
11/30 20:28:27 aa0   waiting for line to clear (VTIME=3), read: [0d][0a]
11/30 20:28:28 aa0   removing lock file
11/30 20:28:28 aa0  waiting...
11/30 20:28:52 aa0    select returned 1
11/30 20:28:52 aa0   checking lockfiles, locking the line
11/30 20:28:52 aa0   makelock(cuaa0) called
11/30 20:28:52 aa0   do_makelock: lock='/var/spool/lock/LCK..cuaa0'
11/30 20:28:52 aa0   lock made
11/30 20:28:52 aa0  wfr: waiting for ``RING''
11/30 20:28:52 aa0   got: [0d][0a]RING[0d]
11/30 20:28:52 aa0    CND: RING
11/30 20:28:52 aa0   wfr: rc=0, drn=0
11/30 20:28:52 aa0    CND: check no: 'none'
11/30 20:28:52 aa0  send: ATA[0d]
11/30 20:28:52 aa0  waiting for ``CONNECT''
11/30 20:28:52 aa0   got: ATA[0d]
11/30 20:28:52 aa0    CND: OKATA[0d][0a]CONNECT ** found **
11/30 20:29:05 aa0  send:
11/30 20:29:05 aa0  waiting for ``_''
11/30 20:29:05 aa0   got:  33600/V34/NONE[0d]
11/30 20:29:05 aa0    CND: CONNECT 33600/V34/NONE
11/30 20:29:05 aa0    CND: found: 33600/V34/NONE ** found **
11/30 20:29:05 aa0   waiting for line to clear (VTIME=3), read: [0a][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
[91][11][91][11][91][11][91][11][91][11][91][11][91]
11/30 20:29:06 aa0  clean_line: only 500 of 1327 bytes logged
11/30 20:29:06 aa0   utmp + wtmp entry made
11/30 20:29:07 aa0   tio_set_flow_control( HARD )
11/30 20:29:07 aa0   print welcome banner (/etc/issue)
11/30 20:29:07 aa0   getlogname (AUTO_PPP), read:[8f][84][9f][f3][f8]H:[ae] [f8][ff][af][f9][ef][94][0a]
11/30 20:29:07 aa0   tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
11/30 20:29:07 aa0    login: use login config file /usr/local/etc/mgetty+sendfax/login.config
11/30 20:29:07 aa0   match: user='__sxH:. /yo_', key=''
11/30 20:29:07 aa0   match: user='__sxH:. /yo_', key=''
11/30 20:29:07 aa0   match: user='__sxH:. /yo_', key='/AutoPPP/'
11/30 20:29:07 aa0   login: fall back to /usr/bin/login
11/30 20:29:07 aa0   calling login: cmd='/usr/bin/login', argv[]='login sxH:. /yo'
11/30 20:29:07 aa0   setenv: 'CALLER_ID=none'
11/30 20:29:07 aa0   setenv: 'CONNECT=33600/V34/NONE'
11/30 20:29:07 aa0   setenv: 'DEVICE=cuaa0'
11/30 20:29:07 ##### data dev=cuaa0, pid=37363, caller='none', conn='33600/V34/NONE', name='', cmd='/usr/bin/login', user='sxH:. /yo'

бывают небольшие различия от звонка к звонку, но в общем все так-же.

• mgetty & freebsd 5.4, antony, 16:16 , 01-Дек-05, (1)