форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Пред. тема | След. тема
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение		[Проследить за развитием треда]

"mpd + freenibs"
Сообщение от MoHaX (ok) on 27-Дек-05, 10:08  (MSK)
Народ сижу туплю. Помогите. Поставил freenibs и mpd. Суть в том, что mpd даже не не пыьается к радиусу обратиться (в логах mpd ни одного слова про радиус). mpd.conf ----------- default:         load client1         load client2 client1:         new -i ng0 pptp1 pptp1         set ipcp ranges 192.168.1.1/32 192.168.1.50/32         load client_standard client2:         new -i ng1 pptp2 pptp2         set ipcp ranges 192.168.1.1/32 192.168.1.51/32         load client_standard client_standard:         set iface disable on-demand         set iface enable proxy-arp         set iface idle 1800         set iface enable tcpmssfix         set bundle enable multilink         set link yes acfcomp protocomp         set link no pap chap         set link enable chap         set link mtu 1460         set link keep-alive 10 60         set ipcp yes vjcomp         set ipcp dns 192.168.1.1         set ipcp nbns 192.168.1.1         set bundle enable compression         set ccp yes mppc         set ccp yes mpp-e40         set ccp yes mpp-e128         set ccp yes mpp-stateless         load radius radius:         set radius config /usr/local/etc/radius.conf         set radius retries 3         set radius timeout 3         set radius server 10.1.166.33 secret 1812 1813         set radius acct-update 300         set ipcp enable radius-ip         set bundle enable radius-auth radius-fallback         set bundle enable radius-acct         set bundle enable compression         set ccp yes mppc         set ccp enable radius -------- Чё я не так делаю?
	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Сообщения по теме

[Сортировка по времени, UBB]

1. "mpd + freenibs"
Сообщение от fa (??) on 27-Дек-05, 14:07  (MSK)
>Народ сижу туплю. Помогите. Поставил freenibs и mpd. Суть в том, что >mpd даже не не пыьается к радиусу обратиться (в логах mpd >ни одного слова про радиус). >mpd.conf >----------- >default: >        load client1 >        load client2 > >client1: >        new -i ng0 pptp1 >pptp1 >        set ipcp ranges 192.168.1.1/32 >192.168.1.50/32 >        load client_standard > >client2: >        new -i ng1 pptp2 >pptp2 >        set ipcp ranges 192.168.1.1/32 >192.168.1.51/32 >        load client_standard > >client_standard: >        set iface disable on-demand > >        set iface enable proxy-arp > >        set iface idle 1800 > >        set iface enable tcpmssfix > >        set bundle enable multilink > >        set link yes acfcomp >protocomp >        set link no pap >chap >        set link enable chap > >        set link mtu 1460 > >        set link keep-alive 10 >60 >        set ipcp yes vjcomp > >        set ipcp dns 192.168.1.1 > >        set ipcp nbns 192.168.1.1 > >        set bundle enable compression > >        set ccp yes mppc > >        set ccp yes mpp-e40 > >        set ccp yes mpp-e128 > >        set ccp yes mpp-stateless > >        load radius > >radius: >        set radius config /usr/local/etc/radius.conf > >        set radius retries 3 > >        set radius timeout 3 > >        set radius server 10.1.166.33 >secret 1812 1813 >        set radius acct-update 300 > >        set ipcp enable radius-ip > >        set bundle enable radius-auth >radius-fallback >        set bundle enable radius-acct > >        set bundle enable compression > >        set ccp yes mppc > >        set ccp enable radius > >-------- > >Чё я не так делаю? Когда-то была похожая проблема. Mpd не мог из конфига радиуса вытащить какой-то параметр. Но не отмалчивался, а выдавал ошибку. Вот эту строчку убрал - заработало. set radius config /usr/local/etc/radius.conf Только не знаю, поможет ли Вам.
Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

	2. "mpd + freenibs"
	Сообщение от MoHaX (ok) on 27-Дек-05, 14:20  (MSK)
	Я тут допёр, что дело вообще до авторизации не доходит. Никто не сталкивался с такой проблемой FreeBSD 5.4 + mpd 3.18? Взял рабочие конфиги с другого сервака (там FreeBSD 4.11), перетащил на этот - таже фигня. Вообще до автризации не доходит не через радиус, не через mpd.secrets. Фик знает чё за фигня. Вот логи: ------- Dec 27 19:24:54 temp mpd: mpd: PPTP connection from 10.1.166.209:2488 Dec 27 19:24:54 temp mpd: pptp0: attached to connection with 10.1.166.209:2488 Dec 27 19:24:54 temp mpd: [pptp0] IFACE: Open event Dec 27 19:24:54 temp mpd: [pptp0] IPCP: Open event Dec 27 19:24:54 temp mpd: [pptp0] IPCP: state change Initial --> Starting Dec 27 19:24:54 temp mpd: [pptp0] IPCP: LayerStart Dec 27 19:24:54 temp mpd: [pptp0] IPCP: Open event Dec 27 19:24:54 temp mpd: [pptp0] bundle: OPEN event in state CLOSED Dec 27 19:24:54 temp mpd: [pptp0] opening link "pptp0"... Dec 27 19:24:54 temp mpd: [pptp0] link: OPEN event Dec 27 19:24:54 temp mpd: [pptp0] LCP: Open event Dec 27 19:24:54 temp mpd: [pptp0] LCP: state change Initial --> Starting Dec 27 19:24:54 temp mpd: [pptp0] LCP: LayerStart Dec 27 19:24:54 temp mpd: [pptp0] device: OPEN event in state DOWN Dec 27 19:24:54 temp mpd: [pptp0] attaching to peer's outgoing call Dec 27 19:24:54 temp mpd: [pptp0] device is now in state OPENING Dec 27 19:24:54 temp mpd: [pptp0] device: UP event in state OPENING Dec 27 19:24:54 temp mpd: [pptp0] device is now in state UP Dec 27 19:24:54 temp mpd: [pptp0] link: UP event Dec 27 19:24:54 temp mpd: [pptp0] link: origination is remote Dec 27 19:24:54 temp mpd: [pptp0] LCP: Up event Dec 27 19:24:54 temp mpd: [pptp0] LCP: state change Starting --> Req-Sent Dec 27 19:24:54 temp mpd: [pptp0] LCP: phase shift DEAD --> ESTABLISH Dec 27 19:24:54 temp mpd: [pptp0] LCP: SendConfigReq #10 Dec 27 19:24:54 temp mpd:  ACFCOMP Dec 27 19:24:54 temp mpd:  PROTOCOMP Dec 27 19:24:54 temp mpd:  MRU 1500 Dec 27 19:24:54 temp mpd:  MAGICNUM 6158332a Dec 27 19:24:54 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:24:54 temp mpd:  MP MRRU 1600 Dec 27 19:24:54 temp mpd:  MP SHORTSEQ Dec 27 19:24:54 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:24:55 temp mpd: pptp0-0: ignoring SetLinkInfo Dec 27 19:24:55 temp mpd: [pptp0] LCP: rec'd Configure Request #0 link 0 (Req-Se                                                                              nt) Dec 27 19:24:55 temp mpd:  MRU 1400 Dec 27 19:24:55 temp mpd:  MAGICNUM 29d7478a Dec 27 19:24:55 temp mpd:  PROTOCOMP Dec 27 19:24:55 temp mpd:  ACFCOMP Dec 27 19:24:55 temp mpd:  CALLBACK Dec 27 19:24:55 temp mpd:    Not supported Dec 27 19:24:55 temp mpd: [pptp0] LCP: SendConfigRej #0 Dec 27 19:24:55 temp mpd:  CALLBACK Dec 27 19:24:56 temp mpd: [pptp0] LCP: SendConfigReq #11 Dec 27 19:24:56 temp mpd:  ACFCOMP Dec 27 19:24:56 temp mpd:  PROTOCOMP Dec 27 19:24:56 temp mpd:  MRU 1500 Dec 27 19:24:56 temp mpd:  MAGICNUM 6158332a Dec 27 19:24:56 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:24:56 temp mpd:  MP MRRU 1600 Dec 27 19:24:56 temp mpd:  MP SHORTSEQ Dec 27 19:24:56 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:24:57 temp mpd: [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Se                                                                              nt) Dec 27 19:24:57 temp mpd:  MRU 1400 Dec 27 19:24:57 temp mpd:  MAGICNUM 29d7478a Dec 27 19:24:57 temp mpd:  PROTOCOMP Dec 27 19:24:57 temp mpd:  ACFCOMP Dec 27 19:24:57 temp mpd:  CALLBACK Dec 27 19:24:57 temp mpd:    Not supported Dec 27 19:24:57 temp mpd: [pptp0] LCP: SendConfigRej #1 Dec 27 19:24:57 temp mpd:  CALLBACK Dec 27 19:24:58 temp mpd: [pptp0] LCP: SendConfigReq #12 Dec 27 19:24:58 temp mpd:  ACFCOMP Dec 27 19:24:58 temp mpd:  PROTOCOMP Dec 27 19:24:58 temp mpd:  MRU 1500 Dec 27 19:24:58 temp mpd:  MAGICNUM 6158332a Dec 27 19:24:58 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:24:58 temp mpd:  MP MRRU 1600 Dec 27 19:24:58 temp mpd:  MP SHORTSEQ Dec 27 19:24:58 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:00 temp mpd: [pptp0] LCP: rec'd Configure Request #2 link 0 (Req-Se                                                                              nt) Dec 27 19:25:00 temp mpd:  MRU 1400 Dec 27 19:25:00 temp mpd:  MAGICNUM 29d7478a Dec 27 19:25:00 temp mpd:  PROTOCOMP Dec 27 19:25:00 temp mpd:  ACFCOMP Dec 27 19:25:00 temp mpd:  CALLBACK Dec 27 19:25:00 temp mpd:    Not supported Dec 27 19:25:00 temp mpd: [pptp0] LCP: SendConfigRej #2 Dec 27 19:25:00 temp mpd:  CALLBACK Dec 27 19:25:00 temp mpd: [pptp0] LCP: SendConfigReq #13 Dec 27 19:25:00 temp mpd:  ACFCOMP Dec 27 19:25:00 temp mpd:  PROTOCOMP Dec 27 19:25:00 temp mpd:  MRU 1500 Dec 27 19:25:00 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:00 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:00 temp mpd:  MP MRRU 1600 Dec 27 19:25:00 temp mpd:  MP SHORTSEQ Dec 27 19:25:00 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:02 temp mpd: [pptp0] LCP: SendConfigReq #14 Dec 27 19:25:02 temp mpd:  ACFCOMP Dec 27 19:25:02 temp mpd:  PROTOCOMP Dec 27 19:25:02 temp mpd:  MRU 1500 Dec 27 19:25:02 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:02 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:02 temp mpd:  MP MRRU 1600 Dec 27 19:25:02 temp mpd:  MP SHORTSEQ Dec 27 19:25:02 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:04 temp mpd: [pptp0] LCP: rec'd Configure Request #3 link 0 (Req-Se                                                                              nt) Dec 27 19:25:04 temp mpd:  MRU 1400 Dec 27 19:25:04 temp mpd:  MAGICNUM 29d7478a Dec 27 19:25:04 temp mpd:  PROTOCOMP Dec 27 19:25:04 temp mpd:  ACFCOMP Dec 27 19:25:04 temp mpd:  CALLBACK Dec 27 19:25:04 temp mpd:    Not supported Dec 27 19:25:04 temp mpd: [pptp0] LCP: SendConfigRej #3 Dec 27 19:25:04 temp mpd:  CALLBACK Dec 27 19:25:04 temp mpd: [pptp0] LCP: SendConfigReq #15 Dec 27 19:25:04 temp mpd:  ACFCOMP Dec 27 19:25:04 temp mpd:  PROTOCOMP Dec 27 19:25:04 temp mpd:  MRU 1500 Dec 27 19:25:04 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:04 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:04 temp mpd:  MP MRRU 1600 Dec 27 19:25:04 temp mpd:  MP SHORTSEQ Dec 27 19:25:04 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:06 temp mpd: [pptp0] LCP: SendConfigReq #16 Dec 27 19:25:06 temp mpd:  ACFCOMP Dec 27 19:25:06 temp mpd:  PROTOCOMP Dec 27 19:25:06 temp mpd:  MRU 1500 Dec 27 19:25:06 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:06 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:06 temp mpd:  MP MRRU 1600 Dec 27 19:25:06 temp mpd:  MP SHORTSEQ Dec 27 19:25:06 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:08 temp mpd: [pptp0] LCP: rec'd Configure Request #4 link 0 (Req-Se                                                                              nt) Dec 27 19:25:08 temp mpd:  MRU 1400 Dec 27 19:25:08 temp mpd:  MAGICNUM 29d7478a Dec 27 19:25:08 temp mpd:  PROTOCOMP Dec 27 19:25:08 temp mpd:  ACFCOMP Dec 27 19:25:08 temp mpd:  CALLBACK Dec 27 19:25:08 temp mpd:    Not supported Dec 27 19:25:08 temp mpd: [pptp0] LCP: SendConfigRej #4 Dec 27 19:25:08 temp mpd:  CALLBACK Dec 27 19:25:08 temp mpd: [pptp0] LCP: SendConfigReq #17 Dec 27 19:25:08 temp mpd:  ACFCOMP Dec 27 19:25:08 temp mpd:  PROTOCOMP Dec 27 19:25:08 temp mpd:  MRU 1500 Dec 27 19:25:08 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:08 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:08 temp mpd:  MP MRRU 1600 Dec 27 19:25:08 temp mpd:  MP SHORTSEQ Dec 27 19:25:08 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:11 temp mpd: [pptp0] LCP: SendConfigReq #18 Dec 27 19:25:11 temp mpd:  ACFCOMP Dec 27 19:25:11 temp mpd:  PROTOCOMP Dec 27 19:25:11 temp mpd:  MRU 1500 Dec 27 19:25:11 temp mpd:  MAGICNUM 6158332a Dec 27 19:25:11 temp mpd:  AUTHPROTO CHAP MSOFTv2 Dec 27 19:25:11 temp mpd:  MP MRRU 1600 Dec 27 19:25:11 temp mpd:  MP SHORTSEQ Dec 27 19:25:11 temp mpd:  ENDPOINTDISC [802.1] 00 80 48 29 92 eb Dec 27 19:25:12 temp mpd: [pptp0] LCP: rec'd Configure Request #5 link 0 (Req-Se                                                                              nt) Dec 27 19:25:12 temp mpd:  MRU 1400 Dec 27 19:25:12 temp mpd:  MAGICNUM 29d7478a Dec 27 19:25:12 temp mpd:  PROTOCOMP Dec 27 19:25:12 temp mpd:  ACFCOMP Dec 27 19:25:12 temp mpd:  CALLBACK Dec 27 19:25:12 temp mpd:    Not supported Dec 27 19:25:12 temp mpd: [pptp0] LCP: not converging Dec 27 19:25:12 temp mpd: [pptp0] LCP: parameter negotiation failed Dec 27 19:25:12 temp mpd: [pptp0] LCP: state change Req-Sent --> Stopped Dec 27 19:25:12 temp mpd: [pptp0] LCP: LayerFinish Dec 27 19:25:12 temp mpd: [pptp0] device: CLOSE event in state UP Dec 27 19:25:12 temp mpd: pptp0-0: clearing call Dec 27 19:25:12 temp mpd: pptp0-0: killing channel Dec 27 19:25:12 temp mpd: [pptp0] PPTP call terminated Dec 27 19:25:12 temp mpd: [pptp0] IFACE: Close event Dec 27 19:25:12 temp mpd: [pptp0] IPCP: Close event Dec 27 19:25:12 temp mpd: [pptp0] IPCP: state change Starting --> Initial Dec 27 19:25:12 temp mpd: [pptp0] IPCP: LayerFinish Dec 27 19:25:12 temp mpd: [pptp0] IFACE: Close event Dec 27 19:25:12 temp mpd: pptp0: closing connection with 10.1.166.209:2488 Dec 27 19:25:12 temp mpd: [pptp0] IFACE: Close event Dec 27 19:25:12 temp mpd: [pptp0] device is now in state CLOSING Dec 27 19:25:12 temp mpd: [pptp0] bundle: CLOSE event in state OPENED Dec 27 19:25:12 temp mpd: [pptp0] closing link "pptp0"... Dec 27 19:25:12 temp mpd: [pptp0] device: DOWN event in state CLOSING Dec 27 19:25:12 temp mpd: [pptp0] device is now in state DOWN Dec 27 19:25:12 temp mpd: [pptp0] link: CLOSE event Dec 27 19:25:12 temp mpd: [pptp0] LCP: Close event Dec 27 19:25:12 temp mpd: [pptp0] LCP: state change Stopped --> Closed Dec 27 19:25:12 temp mpd: [pptp0] device: DOWN event in state DOWN Dec 27 19:25:12 temp mpd: [pptp0] device is now in state DOWN Dec 27 19:25:12 temp mpd: pptp0: killing connection with 10.1.166.209:2488 Dec 27 19:25:12 temp mpd: [pptp0] link: DOWN event Dec 27 19:25:12 temp mpd: [pptp0] LCP: Down event Dec 27 19:25:12 temp mpd: [pptp0] LCP: state change Closed --> Initial Dec 27 19:25:12 temp mpd: [pptp0] LCP: phase shift ESTABLISH --> DEAD Dec 27 19:25:12 temp mpd: [pptp0] link: DOWN event Dec 27 19:25:12 temp mpd: [pptp0] LCP: Down event -------
	Удалить	Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

Архив | Удалить	Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]