The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Не поднимается 2-ое соединие в mpd."
Вариант для распечатки  
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Не поднимается 2-ое соединие в mpd."  
Сообщение от XakniX (ok) on 09-Фев-06, 13:01 
Уже имеется одно впн соединение с помощью mpd. Пытаюсь поднять второе содинение, не поднимается. Вот логи:

[vpn_on] device is now in state OPENING
pptp1: connected to 192.168.140.230:1723
pptp1: attached to connection with 192.168.140.230:1723
pptp1-0: outgoing call connected at 14808325 bps
[vpn_on] PPTP call successful
[vpn_on] device: UP event in state OPENING
[vpn_on] device is now in state UP
[vpn_on] link: UP event
[vpn_on] link: origination is local
[vpn_on] LCP: Up event
[vpn_on] LCP: state change Starting --> Req-Sent
[vpn_on] LCP: phase shift DEAD --> ESTABLISH
[vpn_on] LCP: SendConfigReq #21
MRU 1500
MAGICNUM 839042f4
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 80 48 2f 91 82
[vpn_on] LCP: SendConfigReq #22
MRU 1500
MAGICNUM 839042f4
MP MRRU 1600
MP SHORTSEQ
ENDPOINTDISC [802.1] 00 80 48 2f 91 82
[vpn_on] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
MRU 1400
AUTHPROTO 0xc227
MAGICNUM 18c74b34
PROTOCOMP
ACFCOMP
CALLBACK
   Not supported
MP MRRU 1614
ENDPOINTDISC [LOCAL] 53 4b 44 4d 12 98 41 01 8f 81 a8 00 3e 1c e0 ff 00 00 00 00
BACP
   Not supported
[vpn_on] LCP: SendConfigRej #0
PROTOCOMP
ACFCOMP
CALLBACK
BACP
[vpn_on] LCP: rec'd Configure Reject #22 link 0 (Req-Sent)
MP SHORTSEQ
[vpn_on] LCP: SendConfigReq #23
MRU 1500
MAGICNUM 839042f4
MP MRRU 1600
ENDPOINTDISC [802.1] 00 80 48 2f 91 82
[vpn_on] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
MRU 1400
AUTHPROTO 0xc227
MAGICNUM 18c74b34
MP MRRU 1614
ENDPOINTDISC [LOCAL] 53 4b 44 4d 12 98 41 01 8f 81 a8 00 3e 1c e0 ff 00 00 00 00
[vpn_on] LCP: SendConfigNak #1
AUTHPROTO CHAP MD5
MP MRRU 1600
[vpn_on] LCP: rec'd Configure Ack #23 link 0 (Req-Sent)
MRU 1500
MAGICNUM 839042f4
MP MRRU 1600
ENDPOINTDISC [802.1] 00 80 48 2f 91 82
[vpn_on] LCP: state change Req-Sent --> Ack-Rcvd
[vpn_on] LCP: rec'd Configure Request #2 link 0 (Ack-Rcvd)
MRU 1400
AUTHPROTO CHAP MSOFTv2
MAGICNUM 18c74b34
MP MRRU 1600
ENDPOINTDISC [LOCAL] 53 4b 44 4d 12 98 41 01 8f 81 a8 00 3e 1c e0 ff 00 00 00 00
[vpn_on] LCP: SendConfigAck #2
MRU 1400
AUTHPROTO CHAP MSOFTv2
MAGICNUM 18c74b34
MP MRRU 1600
ENDPOINTDISC [LOCAL] 53 4b 44 4d 12 98 41 01 8f 81 a8 00 3e 1c e0 ff 00 00 00 00
[vpn_on] LCP: state change Ack-Rcvd --> Opened
[vpn_on] LCP: phase shift ESTABLISH --> AUTHENTICATE
[vpn_on] LCP: auth: peer wants CHAP, I want nothing
[vpn_on] LCP: LayerUp
pptp1: CID 0xbf7a in SetLinkInfo not found
[vpn_on] CHAP: rec'd CHALLENGE #0
Name: "TIGER"
Using authname "Mixa"
[vpn_on] CHAP: sending RESPONSE
[vpn_on] CHAP: rec'd SUCCESS #0
MESG: S=A269D2C54C90535FCC074A3B6175E242A806D32C
[vpn_on] LCP: authorization successful
[vpn_on] LCP: phase shift AUTHENTICATE --> NETWORK
[vpn_on] setting interface ng2 MTU to 1500 bytes
[vpn_on] up: 1 link, total bandwidth 64000 bps
[vpn_on] IPCP: Up event
[vpn_on] IPCP: state change Starting --> Req-Sent
[vpn_on] IPCP: SendConfigReq #11
IPADDR 192.169.1.2
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[vpn_on] error writing len 20 frame to bypass: Network is down
[vpn_on] rec'd unexpected protocol CCP on link 0, rejecting
[vpn_on] IPCP: rec'd Configure Request #5 link 0 (Req-Sent)
IPADDR 10.10.166.1
   10.10.166.1 is OK
[vpn_on] IPCP: SendConfigAck #5
IPADDR 10.10.166.1
[vpn_on] IPCP: state change Req-Sent --> Ack-Sent
[vpn_on] rec'd unexpected protocol CCP on link 0, rejecting
[vpn_on] IPCP: SendConfigReq #12
IPADDR 192.169.1.2
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[vpn_on] IPCP: rec'd Configure Reject #12 link 0 (Ack-Sent)
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[vpn_on] IPCP: SendConfigReq #13
IPADDR 192.169.1.2
[vpn_on] IPCP: rec'd Configure Nak #13 link 0 (Ack-Sent)
IPADDR 10.10.166.5
   10.10.166.5 is OK
[vpn_on] IPCP: SendConfigReq #14
IPADDR 10.10.166.5
[vpn_on] IPCP: rec'd Configure Ack #14 link 0 (Ack-Sent)
IPADDR 10.10.166.5
[vpn_on] IPCP: state change Ack-Sent --> Opened
[vpn_on] IPCP: LayerUp
  10.10.166.5 -> 10.10.166.1
[vpn_on] IFACE: Up event
[vpn_on] setting interface ng2 MTU to 1500 bytes
[vpn_on] exec: /sbin/ifconfig ng2 10.10.166.5 10.10.166.1 netmask 0xffffffff -link0
[vpn_on] exec: /sbin/route add 10.10.166.5 -iface lo0
[vpn_on] IFACE: Up event
[vpn_on] rec'd unexpected protocol CCP on link 0, rejecting
pptp1: CID 0xbf7a in SetLinkInfo not found
[vpn_on] LCP: rec'd Terminate Request #8 link 0 (Opened)
[vpn_on] LCP: state change Opened --> Stopping
[vpn_on] LCP: phase shift NETWORK --> TERMINATE
[vpn_on] setting interface ng2 MTU to 1500 bytes
[vpn_on] up: 0 links, total bandwidth 9600 bps
[vpn_on] IPCP: Down event
[vpn_on] IPCP: state change Opened --> Starting
[vpn_on] IPCP: LayerDown
[vpn_on] IFACE: Down event
[vpn_on] exec: /sbin/route delete 10.10.166.5 -iface lo0
[vpn_on] exec: /sbin/ifconfig ng2 down delete -link0
[vpn_on] LCP: SendTerminateAck #24
[vpn_on] LCP: LayerDown
[vpn_on] LCP: state change Stopping --> Stopped
[vpn_on] LCP: phase shift TERMINATE --> ESTABLISH
[vpn_on] LCP: LayerFinish
[vpn_on] device: CLOSE event in state UP
pptp1-0: clearing call
[vpn_on] device is now in state CLOSING
[vpn_on] device: DOWN event in state CLOSING
[vpn_on] device is now in state DOWN
[vpn_on] link: DOWN event
[vpn_on] LCP: Down event
[vpn_on] LCP: state change Stopped --> Starting
[vpn_on] LCP: phase shift ESTABLISH --> DEAD
[vpn_on] LCP: LayerStart
[vpn_on] device: OPEN event in state DOWN
[vpn_on] pausing 9 seconds before open
[vpn_on] device is now in state DOWN
[vpn_on] device: OPEN event in state DOWN
[vpn_on] device is now in state DOWN
pptp1-0: peer call disconnected res=zero? err=none
pptp1-0: killing channel
pptp1: closing connection with 192.168.140.230:1723
close[vpn_on] closing link "vpn_on"...

Подскажите в чем проблема, плизз?...и что такое pptp1: CID 0xbf7a in SetLinkInfo not found???

Правка | Высказать мнение | Ответить | Cообщить модератору | Наверх

 Оглавление

Сообщения по теме [Сортировка по времени, UBB]


1. "Не поднимается 2-ое соединие в mpd."  
Сообщение от tor email(??) on 14-Фев-06, 04:33 
mpd.conf
mpd.linck
Правка | Высказать мнение | Ответить | Cообщить модератору | Наверх

Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ] [Рекомендовать для помещения в FAQ]




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру