>можешь скинуть конфиг portslave ?
ugu
>в чем может быть проблема ?
ссылку можно создать на pppd.
вот мой конф. модем idc 2814bxl+, com1
# pslave.conf Here is the sample server configuration file.
#
# Version: 2005.04.03
# IP address - if left empty, uses the IP address of the system (hostname).
# This is used as the "local" address for SLIP and PPP connections.
#
# used to be conf.ipno
all.loc_host 10.3.2.10
# If you set this to "yes", you can always login locally by putting a '!'
# before your loginname. Useful for emergencies when the RADIUS server is down.
#
all.locallogins yes
# Logging stuff - this program can use a remote syslog daemon if needed.
# If you want to log locally leave the "syslog" field empty. The facility
# field is an integer between 0 and 7 and sets the syslog facility to
# local0-local7.
#
#all.syslog logger.someisp.com
all.syslog
all.facility 2
# Directory where your scripts that set up IP filtering (typically using
# ipfwadmin) are stored. To invoke them, just add the RADIUS-attribute
# Framed-Filter-Id = "foo" to your profile, where foo is the name of script.
#
all.filterdir /etc/portslave/filters
## The all entry is used as a template for all others. This means that
## setting all.debug to "2", you set s0.debug, s1.debug, s2.debug etc.
## to "2". It also means that all these settings can be overridden on a
## per-port basis below.
# Debugging output to syslog. Set to 0, 1, or 2. 2 is pretty verbose.
#
all.debug 1
# Authentication type - either "radius" or "none".
#
all.authtype radius
# Default is to accept NULL passwords when doing radius authentication. Set
# to "0" or "1". This option does not have effect on non-radius
# authentication - i.e. if "authtype" is "none" or if you do a local login.
#
all.radnullpass no
# Default protocol and host.
#
all.protocol ppp
# Default IP stuff. If you end the "rem_host" with a "+", the portnumber will
# be added to the IP number. The IP number of a port is used when the RADIUS
# server doesn't send an IP number, or if it tells us to use a dynamic rem_host.
#
# Leave the netmask at 255.255.255.255, unless your really know what
# you're doing.
#
# all.rem_host used to be all.ipno
all.rem_host 172.16.3.2+
all.netmask 255.255.255.255
all.mtu 576
# Standard message that is issued on connect.
#
all.issue \n\
\n\
Welcome to my internet server %h port S%p \n\
\n\
\n
# If you want portslave to update the wtmp file just
# like a regular getty/login, set this to yes.
#
all.syswtmp yes
## Options for the serial port.
# Porttype (passed to radius server for logging).
# async, sync, isdn, isdn-v120, isdn-v110
#
all.porttype async
# Speed. All ports are set to 8N1.
#
all.speed 115200
# Use this to initialize the connection
#
# d == delay (1 sec), p == pause (0.1 sec), l == toggle DTR
# r == <CR>, l == <LF>
#
# If the modem tells us the calling number by "NMBR = num" and the called
# number by "NDID = num" (as some brands apparently do) then add the
# following to the start of the initchat to recognise the CLI numbers:
# SETVAR "S=NMBR = " \
# SETVAR "D=NDID = " \
#
all.initchat TIMEOUT 10 \
ABORT "NO CARRIER" \
ABORT VOICE \
SETVAR "C=CARRIER " \
SETVAR C+PROTOCOL: \
SETVAR C?CONNECT \
"" \d\l\dATZ \
OK\r\n-ATZ-OK\r\n "\c" \
TIMEOUT 3600 \
RING "\c" \
STATUS Incoming %p:I.HANDSHAKE \
"" ATA \
TIMEOUT 75 \
CONNECT "\c" \
STATUS Connected %p:I.HANDSHAKE
# Flow control on this serial port:
# hard - hardware, rts/cts
# soft - software, CTRL-S / CTRL-Q
# none.
#
all.flow hard
# Use the DCD line or not (this sets CLOCAL if off). This means that the
# session will get hung up if the modem hangs up. Can be set to 0 or 1.
#
all.dcd yes
# PPP options - used if we autodetect a PPP session.
# Note that we set mru and mtu both to the MTU setting.
#
all.autoppp proxyarp %d asyncmap 0 %i: \
noipx noccp login auth require-pap refuse-chap \
mtu %t mru %t \
ms-dns 10.3.2.10 ms-dns 212.35.160.30 \
plugin /usr/lib/libpsr.so
## PPP options - User already authenticated and service type is PPP.
#
all.pppopt proxyarp %d asyncmap 0 %i:%j \
noipx noccp \
mtu %t mru %t \
netmask %m idle %I maxconnect %T \
ms-dns 10.3.2.10 ms-dns 212.35.160.30 \
plugin /usr/lib/libpsr.so
## Tty names are s0...s63. For every port we need to define a tty port, and
## an IP number for when radius tells us to pick one ourself. Unless you
## use the IP pool option mentioned above (IP number with "+" appended).
##
## Note that you can change _all_ of the above settings that start
## with all.xxxx on a per-port basis, such as issue, prompt etc.
#
##make the first 32 ports be Rocketport
#s{0-31} ttyR{0-31}
##used to need the following lines repeated
#s0.tty ttyR0
#s1.tty ttyR1
#s2.tty ttyR2
##make the next 32 ports be Cyclades
#s{32-63} ttyC{0-31}
##make the next 32 ports be Stallion
#s{64-95} ttyE{0-31}
##make ports 100 and 101 be standard serial.
#s{100-101} ttyS{0-1}
#s{0-1} ttyS{0-1}
##the above but for devfs
#s{0-31} ttS/R{0-31}
#s{32-63} ttS/C{0-31}
#s{64-95} ttS/E{0-31}
#s{100-101} ttS/{0-1}
s0.tty ttyS0
Вариант для распечатки
OpenNET: Виртуальная конференция (Public)
on 16-Фев-06, 14:34 
