>/var/log/ppp.log
>Sep 14 15:27:13 fecha ppp[192]: tun0: IPCP: COMPPROTO[6] 16 VJ slots
>with slot compression Что такое "VJ slots" ? У меня не работает PPPoE. В логах есть строки про "VJ slots"? только без компрессии.
ppp.conf:
======================================================
default:
pppoe-out:
# set device PPPoE:fxp0:inetsrv
set device PPPoE:vr0:inetsrv
set log Phase Chat IPCP tun command
set cd 5
set dial
set login
set authname malor
set authkey moi_parol
set redial 30 999
set reconnect 30 999
enable lqr
accept lqr
set timeout 0
disable PAP deflate pred1 protocomp vjcomp dns
deny PAP deflate pred1 protocomp vjcomp dns
================================================================
ppp.log:
================================================================
Aug 30 22:48:06 gangster ppp[1132]: Phase: Using interface: tun0
Aug 30 22:48:06 gangster ppp[1132]: Phase: deflink: Created in closed state
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set cd 5
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set dial
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set login
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set authname malor
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set authkey ********
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set redial 30 999
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set reconnect 30 999
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: enable lqr
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: accept lqr
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: set timeout 0
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: disable PAP deflate pred1 protocomp vjcomp dns
Aug 30 22:48:06 gangster ppp[1132]: tun0: Command: pppoe-out: deny PAP deflate pred1 protocomp vjcomp dns
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: PPP Started (ddial mode).
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: bundle: Establish
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: closed -> opening
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: Connected!
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: opening -> dial
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: dial -> carrier
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "sttkgw.infy.ru")
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Received NGM_PPPOE_SESSIONID
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Received NGM_PPPOE_SUCCESS
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: carrier -> login
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: login -> lcp
Aug 30 22:48:06 gangster ppp[1134]: tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: bundle: Authenticate
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Chap Input: CHALLENGE (42 bytes)
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Chap Output: RESPONSE (malor)
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: Chap Input: SUCCESS (Welcome)
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: lcp -> open
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: bundle: Network
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: FSM: Using "deflink" as a transport
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: State change Initial --> Closed
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: LayerStart.
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 127.0.0.1
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: State change Closed --> Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: RecvConfigReq(87) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.1
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: SendConfigRej(87) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: RecvConfigNak(1) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.84
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] changing address: 127.0.0.1 --> 83.69.21.84
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: SendConfigReq(2) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.84
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: RecvConfigReq(88) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.1
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: SendConfigAck(88) state = Req-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.1
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: IPADDR[6] 83.69.21.84
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: State change Ack-Sent --> Opened
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: deflink: LayerUp.
Aug 30 22:48:06 gangster ppp[1134]: tun0: IPCP: myaddr 83.69.21.84 hisaddr = 83.69.21.1
Aug 30 22:48:06 gangster ppp[1134]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Aug 30 22:48:18 gangster last message repeated 4 times
===================================================================
Смущают всего больше строки :
tun0: IPCP: COMPPROTO[6] 16 VJ slots without slot compression
tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
===================================================================
# ifconfig
rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:e0:4c:00:26:72
media: Ethernet autoselect (10baseT/UTP)
status: no carrier
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.1.160 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:30:18:55:11:2e
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1460
===================================================================
Что делать?
FreeBSD 6.2