Не хочет работать SkyStar2 rev2.7U в FC2 с ядром 2.6.10
Здесь все прочитал, Гуглом пользовался. Может кто что посоветует? У кого-нибудь работает?

Ошибка такая:
mt312_read: ret == -121
skystar2: A frontend driver was not found for device 13d0/2103 subsystem 13d0/2103

Ну и вот все что могу предоставить для обнаружения грабель

# ls -lR /dev/dvb
/dev/dvb:
total 16
drwxr-xr-x  2 root root 4096 Nov 14 15:35 adapter0
drwxr-xr-x  2 root root 4096 Nov 14 15:35 adapter1
drwxr-xr-x  2 root root 4096 Nov 14 15:35 adapter2
drwxr-xr-x  2 root root 4096 Nov 14 15:35 adapter3

/dev/dvb/adapter0:
total 0
crw-rw----  1 root video 250, 1 Nov 14 15:35 audio0
crw-rw----  1 root video 250, 6 Nov 14 15:35 ca0
crw-rw----  1 root video 250, 4 Nov 14 15:35 demux0
crw-rw----  1 root video 250, 5 Nov 14 15:35 dvr0
crw-rw----  1 root video 250, 3 Nov 14 15:35 frontend0
crw-rw----  1 root video 250, 7 Nov 14 15:35 net0
crw-rw----  1 root video 250, 8 Nov 14 15:35 osd0
crw-rw----  1 root video 250, 0 Nov 14 15:35 video0

/dev/dvb/adapter1:
total 0
crw-rw----  1 root video 250, 65 Nov 14 15:35 audio0
crw-rw----  1 root video 250, 70 Nov 14 15:35 ca0
crw-rw----  1 root video 250, 68 Nov 14 15:35 demux0
crw-rw----  1 root video 250, 69 Nov 14 15:35 dvr0
crw-rw----  1 root video 250, 67 Nov 14 15:35 frontend0
crw-rw----  1 root video 250, 71 Nov 14 15:35 net0
crw-rw----  1 root video 250, 72 Nov 14 15:35 osd0
crw-rw----  1 root video 250, 64 Nov 14 15:35 video0

/dev/dvb/adapter2:
total 0
crw-rw----  1 root video 250, 129 Nov 14 15:35 audio0
crw-rw----  1 root video 250, 134 Nov 14 15:35 ca0
crw-rw----  1 root video 250, 132 Nov 14 15:35 demux0
crw-rw----  1 root video 250, 133 Nov 14 15:35 dvr0
crw-rw----  1 root video 250, 131 Nov 14 15:35 frontend0
crw-rw----  1 root video 250, 135 Nov 14 15:35 net0
crw-rw----  1 root video 250, 136 Nov 14 15:35 osd0
crw-rw----  1 root video 250, 128 Nov 14 15:35 video0

/dev/dvb/adapter3:
total 0
crw-rw----  1 root video 250, 193 Nov 14 15:35 audio0
crw-rw----  1 root video 250, 198 Nov 14 15:35 ca0
crw-rw----  1 root video 250, 196 Nov 14 15:35 demux0
crw-rw----  1 root video 250, 197 Nov 14 15:35 dvr0
crw-rw----  1 root video 250, 195 Nov 14 15:35 frontend0
crw-rw----  1 root video 250, 199 Nov 14 15:35 net0
crw-rw----  1 root video 250, 200 Nov 14 15:35 osd0
crw-rw----  1 root video 250, 192 Nov 14 15:35 video0

с 212 вместо 250 пробовал, тоже самое

файл /etc/modprobe.conf
alias skystar skystar2
alias frontend stv0299
alias frontend mt312

по отдельности фронтенды пробовал, те же яйца

#lspci
01:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)

#uname -a
Linux router2 2.6.10-2.3.legacy_FC2 #1 Sat Feb 18 21:55:30 EST 2006 i686 athlon i386 GNU/Linux

Загрузка драйверов
#modprobe dvb-core dvb_shutdown_timeout=0 dvb_net_debug=1
здесь пробовал и modprobe mt312 и stv0299
#modprobe skystar2 debug=2

Все загружается, но не работает и в логах это:

/var/log/debug
Nov 14 16:56:08 router2 kernel: claim_adapter: card revision 2
Nov 14 16:56:08 router2 kernel: ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 12 (level, low) -> IRQ 12
Nov 14 16:56:08 router2 kernel: claim_adapter: io memory maped at e089a000
Nov 14 16:56:08 router2 kernel: dma_init_dma: Initializing DMA1 channel
Nov 14 16:56:08 router2 kernel: dma_init_dma: first subbuffer address = 0x19e80000
Nov 14 16:56:08 router2 kernel: dma_init_dma: subbuffer size = 0x1d600
Nov 14 16:56:08 router2 kernel: dma_init_dma: second subbuffer address = 0x19e9d601
Nov 14 16:56:08 router2 kernel: dma_init_dma: counter = 0x19e80000
Nov 14 16:56:08 router2 kernel: init_dma_queue: allocated dma buffer at 0xd9e80000, length=240640
Nov 14 16:56:08 router2 kernel: dma_init_dma: Initializing DMA2 channel
Nov 14 16:56:08 router2 kernel: dma_init_dma: first subbuffer address = 0x19dec000
Nov 14 16:56:08 router2 kernel: dma_init_dma: subbuffer size = 0x3ac
Nov 14 16:56:08 router2 kernel: dma_init_dma: second buffer address = 0x19dec3ad
Nov 14 16:56:08 router2 kernel: init_dma_queue: allocated dma buffer at 0xd9dec000, length=1880
Nov 14 16:56:08 router2 kernel: drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
Nov 14 16:56:08 router2 kernel: drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters
Nov 14 16:56:08 router2 kernel: drivers/media/dvb/b2c2/skystar2.c: useable_hardware_filters set to 38
Nov 14 16:56:08 router2 kernel: init_pids: setting filter 0 to 0x1fff
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=0  pid=8191
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=0  addr=300 l  pid=8191
Nov 14 16:56:08 router2 kernel: init_pids: setting filter 1 to 0x1fff
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=1  pid=8191
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=1  addr=300 h  pid=8191
Nov 14 16:56:08 router2 kernel: init_pids: setting filter 2 to 0x1fff
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=2  pid=8191
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=2  addr=304 l  pid=8191
Nov 14 16:56:08 router2 kernel: init_pids: setting filter 3 to 0x1fff
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=3  pid=8191
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=3  addr=304 h  pid=8191
Nov 14 16:56:08 router2 kernel: init_pids: setting filter 4 to 0x1fff
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=4  pid=8191
Nov 14 16:56:08 router2 kernel: pid_set_hw_pid: id=4  addr=308 l  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 5 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=5  pid=8191
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=5  addr=308 h  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 6 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=6  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 7 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=7  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 8 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=8  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 9 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=9  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 10 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=10  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 11 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=11  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 12 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=12  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 13 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=13  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 14 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=14  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 15 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=15  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 16 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=16  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 17 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=17  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 18 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=18  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 19 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=19  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 20 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=20  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 21 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=21  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 22 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=22  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 23 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=23  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 24 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=24  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 25 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=25  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 26 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=26  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 27 to 0x1fff
Nov 14 16:56:09 router2 kernel: pid_set_hw_pid: id=27  pid=8191
Nov 14 16:56:09 router2 kernel: init_pids: setting filter 28 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=28  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 29 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=29  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 30 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=30  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 31 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=31  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 32 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=32  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 33 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=33  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 34 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=34  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 35 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=35  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 36 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=36  pid=8191
Nov 14 16:56:10 router2 kernel: init_pids: setting filter 37 to 0x1fff
Nov 14 16:56:10 router2 kernel: pid_set_hw_pid: id=37  pid=8191
Nov 14 16:56:10 router2 kernel: pid_set_group_pid: pid=0
Nov 14 16:56:10 router2 kernel: pid_set_group_mask: pid=1fe0
Nov 14 16:56:10 router2 kernel: sram_detect_for_flex2:
Nov 14 16:56:10 router2 kernel: sram_detect_for_flex2: tmp2 = 0
Nov 14 16:56:10 router2 kernel: sram_detect_for_flex2: tmp3 = 1
Nov 14 16:56:10 router2 kernel: sram_test_location: mask = 20000, addr = 18000
Nov 14 16:56:10 router2 kernel: sram_init: dw_sram_type = 20000
Nov 14 16:56:10 router2 kernel: sram_test_location: wrote 0xa5, read 0x4f
Nov 14 16:56:10 router2 kernel: sram_test_location: mask = 0, addr = 10000
Nov 14 16:56:10 router2 kernel: sram_init: dw_sram_type = 0
Nov 14 16:56:10 router2 kernel: sram_test_location: wrote 0xa5, read 0x4f
Nov 14 16:56:10 router2 kernel: sram_test_location: mask = 10000, addr = 0
Nov 14 16:56:10 router2 kernel: sram_init: dw_sram_type = 10000
Nov 14 16:56:10 router2 kernel: sram_test_location: wrote 0xa5, read 0xa5
Nov 14 16:56:10 router2 kernel: sram_test_location: wrote 0x5a, read 0x5a
Nov 14 16:56:10 router2 kernel: sram_init: dw_sram_type = 10000
Nov 14 16:56:10 router2 kernel: sram_detect_for_flex2: sram size = 32K
Nov 14 16:56:10 router2 kernel: driver_initialize sram length = 32768, sram type= 10000
Nov 14 16:56:10 router2 kernel: flex_i2c_read:
Nov 14 16:56:10 router2 last message repeated 3 times
Nov 14 16:56:10 router2 kernel: DVB: registering new adapter (SkyStar2).
Nov 14 16:56:10 router2 kernel: master_xfer: 1 messages to transfer
Nov 14 16:56:10 router2 kernel: message 0: flags=0x0, addr=0x68, buf=0x2, len=2
Nov 14 16:56:10 router2 kernel: flex_i2c_write:
Nov 14 16:56:10 router2 kernel: master_xfer: write error 0 !
Nov 14 16:56:10 router2 kernel: message 0: flags=0x0, addr=0x68, buf[0]=0x2, len=2
Nov 14 16:56:11 router2 kernel: master_xfer: 2 messages to transfer
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0x68, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0x68, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: flex_i2c_read:
Nov 14 16:56:11 router2 kernel: master_xfer: read error !
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0x68, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0x68, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: master_xfer: 2 messages to transfer
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0xf, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: flex_i2c_read:
Nov 14 16:56:11 router2 kernel: master_xfer: read error !
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0xf, buf=0x7f, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0xf, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: master_xfer: 2 messages to transfer
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0xe, buf=0x7e, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0xe, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: flex_i2c_read:
Nov 14 16:56:11 router2 kernel: master_xfer: read error !
Nov 14 16:56:11 router2 kernel: message 0: flags=0x0, addr=0xe, buf=0x7e, len=1
Nov 14 16:56:11 router2 kernel: message 1: flags=0x1, addr=0xe, buf=0x0, len=1
Nov 14 16:56:11 router2 kernel: mt312_read: ret == -121
Nov 14 16:56:11 router2 kernel: skystar2: A frontend driver was not found for device 13d0/2103 subsystem 13d0/2103