forum.opennet.ru - "Kernel panic during file copy..." (11)

форумы

помощь

поиск

регистрация

майллист

вход/выход

слежка

"Kernel panic during file copy..."

Форум Открытые системы на сервере (Система. проблемы, диагностика)
Вариант для распечатки		Пред. тема \| След. тема
Изначальное сообщение		[ Отслеживать ]

"Kernel panic during file copy..."	+/–
Сообщение от Lys (ok) on 25-Дек-08, 21:13
Доброго времени суток! Имеется машинка с FreeBSD 7.1 RC2, работающая в сети. Работает стабильно, пока дело не доходит до копирования ряда файлов(чем больше файлы и чем больше их, тем вероятнее появление ошибки). В этом случае на определенном этапе вылетает следующее сообщение и система виснет. После этого только ресет по черному помогает возобновить работу. В результате, после этого fsck при загрузке находит кучу ошибок, но загрузка проходит нормально. panic: vm_page_insert: page already inserted (root) ON ttyv1 cpuid = 1 Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock panic: sleeping thread cpuid = 1 Не важно каким способом проходит копирование(smbd,ftp, комманда cp) ошибка повторяется при всех способах. Ядра с предыдущих версий(6.2, 6.4, 7.0) системы загружатся не хотели(как GENERIC с диска, так и вручную собранное). Сообщения ядра при загрузке (dmesg) Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008 root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146369536 (2046 MB) avail memory = 2094977024 (1997 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 9.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at device 6.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:fc:ae:11:24 rl0: [ITHREAD] rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at device 7.0 on pci1 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> PHY 0 on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:30:4f:14:5a:e4 rl1: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f irq 21 at device 15.0 on pci0 miibus2: <MII bus> on nfe0 rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: Ethernet address: 00:22:15:15:84:41 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 22 at device 16.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a rl0: link state changed to UP WARNING: /usr2 was not properly dismounted WARNING: attempt to net_add_domain(netgraph) after domainfinalize() panic: vm_page_insert: page already inserted cpuid = 1 Sleeping thread (tid 100069, pid 999) owns a non-sleepable lock panic: sleeping thread cpuid = 1 Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RC2 #9: Wed Dec 24 21:41:19 EET 2008 root@lsd.chokolovka.net:/usr/obj/usr/src/sys/LSD Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fd Stepping = 13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146369536 (2046 MB) avail memory = 2094977024 (1997 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 8 ports with 8 removable, self powered atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia> at device 9.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem 0xefbff000-0xefbff0ff irq 18 at device 6.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:fc:ae:11:24 rl0: [ITHREAD] rl1: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xefbfe000-0xefbfe0ff irq 19 at device 7.0 on pci1 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> PHY 0 on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: Ethernet address: 00:30:4f:14:5a:e4 rl1: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci1: <nVidia ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] nfe0: <NVIDIA nForce MCP73 Networking Adapter> port 0xd800-0xd807 mem 0xefffd000-0xefffdfff,0xefffc000-0xefffc0ff,0xefffb000-0xefffb00f irq 21 at device 15.0 on pci0 miibus2: <MII bus> on nfe0 rlphy2: <RTL8201L 10/100 media interface> PHY 1 on miibus2 rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nfe0: Ethernet address: 00:22:15:15:84:41 nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 22 at device 16.0 on pci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 928092806000928 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited ad0: 76319MB <WDC WD800JB-00JJC0 05.01C05> at ata0-master UDMA100 ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted rl0: link state changed to UP WARNING: /usr2 was not properly dismounted WARNING: attempt to net_add_domain(netgraph) after domainfinalize() ********************************************************************** ps ax PID TT STAT TIME COMMAND 0 ?? DLs 0:00.01 [swapper] 1 ?? ILs 0:00.00 /sbin/init -- 2 ?? DL 0:00.01 [g_event] 3 ?? DL 0:01.23 [g_up] 4 ?? DL 0:02.28 [g_down] 5 ?? DL 0:00.00 [thread taskq] 6 ?? DL 0:00.00 [acpi_task_0] 7 ?? DL 0:00.00 [acpi_task_1] 8 ?? DL 0:00.00 [acpi_task_2] 9 ?? DL 0:00.00 [kqueue taskq] 10 ?? DL 0:00.00 [audit] 11 ?? RL 5:00.34 [idle: cpu1] 12 ?? RL 4:58.78 [idle: cpu0] 13 ?? WL 0:00.67 [swi4: clock sio] 14 ?? WL 0:00.00 [swi3: vm] 15 ?? WL 0:00.00 [swi1: net] 16 ?? DL 0:00.10 [yarrow] 17 ?? WL 0:00.01 [swi6: Giant taskq] 18 ?? WL 0:00.00 [swi6: task queue] 19 ?? DL 0:00.00 [xpt_thrd] 20 ?? WL 0:00.00 [swi2: cambio] 21 ?? WL 0:00.00 [swi5: +] 22 ?? WL 0:00.00 [irq9: acpi0] 23 ?? WL 0:00.00 [irq21: ohci0] 24 ?? DL 0:00.00 [usb0] 25 ?? DL 0:00.00 [usbtask-hc] 26 ?? DL 0:00.00 [usbtask-dr] 27 ?? WL 0:00.00 [irq22: ehci0] 28 ?? DL 0:00.00 [usb1] 29 ?? WL 0:00.79 [irq14: ata0] 30 ?? WL 0:00.00 [irq15: ata1] 31 ?? WL 0:00.01 [irq18: rl0] 32 ?? WL 0:00.00 [irq19: rl1] 33 ?? WL 0:00.01 [irq20: atapci1] 34 ?? DL 0:00.01 [nfe0 taskq] 35 ?? DL 0:00.02 [acpi_thermal] 36 ?? DL 0:00.00 [acpi_cooling0] 37 ?? DL 0:00.00 [fdc0] 38 ?? WL 0:00.02 [irq1: atkbd0] 39 ?? WL 0:00.00 [swi0: sio] 40 ?? DL 0:00.00 [sctp_iterator] 41 ?? DL 0:00.37 [dummynet] 42 ?? DL 0:00.00 [pagedaemon] 43 ?? DL 0:00.00 [vmdaemon] 44 ?? DL 0:00.00 [pagezero] 45 ?? DL 0:00.00 [bufdaemon] 46 ?? DL 0:00.01 [syncer] 47 ?? DL 0:00.00 [vnlru] 48 ?? DL 0:00.00 [softdepflush] 139 ?? Is 0:00.00 adjkerntz -i 534 ?? Is 0:00.00 /sbin/devd 610 ?? Ss 0:00.01 /sbin/natd -n nfe0 632 ?? Is 0:00.00 /sbin/routed -q 678 ?? Is 0:00.01 /usr/sbin/syslogd -s 755 ?? Ss 0:00.01 /usr/local/sbin/nmbd -D -s /usr/local/etc/smb.conf 768 ?? Ss 0:00.01 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf 774 ?? Is 0:00.00 proftpd: (accepting connections) (proftpd) 806 ?? I 0:00.00 /usr/local/sbin/smbd -D -s /usr/local/etc/smb.conf 807 ?? Is 0:00.00 /usr/local/sbin/dhcpd -cf /usr/local/etc/dhcpd.conf - 865 ?? Ss 0:00.02 /usr/local/libexec/netams -lf /usr/local/etc/netams.c 872 ?? Ss 0:00.03 /usr/local/apache2/bin/httpd 894 ?? Is 0:00.00 /usr/sbin/sshd 900 ?? I 0:00.00 /usr/local/apache2/bin/httpd 901 ?? I 0:00.00 /usr/local/apache2/bin/httpd 902 ?? I 0:00.00 /usr/local/apache2/bin/httpd 903 ?? I 0:00.00 /usr/local/apache2/bin/httpd 904 ?? I 0:00.00 /usr/local/apache2/bin/httpd 905 ?? Ss 0:00.00 sendmail: accepting connections (sendmail) 911 ?? Is 0:00.00 sendmail: Queue runner@00:30:00 for /var/spool/client 917 ?? Ss 0:00.00 /usr/sbin/cron -s 987 v0 Is+ 0:00.00 /usr/libexec/getty Pc ttyv0 988 v1 Is 0:00.01 login [pam] (login) 995 v1 I 0:00.02 -csh (csh) 1005 v1 S+ 0:00.07 mc 989 v2 Is+ 0:00.00 /usr/libexec/getty Pc ttyv2 990 v3 Is+ 0:00.00 /usr/libexec/getty Pc ttyv3 991 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4 992 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5 993 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6 994 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7 935 con- S 0:00.12 /usr/local/mysql/bin/mysqld -u root 1007 p0 Ss 0:00.02 tcsh (csh) 1020 p0 R+ 0:00.00 ps ax ************************************************************************************** В чем причина ошибки? Спасибо за внимание.
Ответить \| Правка \| Cообщить модератору

Оглавление

Kernel panic during file copy..., Lys, 21:14 , 25-Дек-08, (1)

Kernel panic during file copy..., mikra, 13:18 , 26-Дек-08, (2)

Kernel panic during file copy..., mikra, 13:23 , 26-Дек-08, (3)

Kernel panic during file copy..., Lys, 21:00 , 26-Дек-08, (5)

Kernel panic during file copy..., Lys, 20:56 , 26-Дек-08, (4)

Kernel panic during file copy..., mikra, 13:36 , 29-Дек-08, (6)

Kernel panic during file copy..., Lys, 14:41 , 29-Дек-08, (7)

Kernel panic during file copy..., Том Сойер, 15:00 , 29-Дек-08, (8)

Kernel panic during file copy..., Lys, 01:18 , 04-Фев-09, (9)

Kernel panic during file copy..., Lys, 11:20 , 11-Фев-09, (10)
Kernel panic during file copy..., VladimirM, 12:57 , 15-Апр-16, (11)

Сообщения по теме [Сортировка по времени | RSS]

1. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 25-Дек-08, 21:14

Конфигурация ядра
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/ke...
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.15.2.1 2008/11/25 02:59:29 kensmith Exp $
#cpu        I486_CPU
#cpu        I586_CPU
cpu        I686_CPU
ident        LSD
# To statically compile in device wiring instead of /boot/device.hints
#hints        "GENERIC.hints"        # Default places to look for devices.
makeoptions    DEBUG=-g        # Build kernel with gdb(1) debug symbols
options     SCHED_ULE        # ULE scheduler
options     PREEMPTION        # Enable kernel thread preemption
options     INET            # InterNETworking
#options     INET6            # IPv6 communications protocols
options     SCTP            # Stream Control Transmission Protocol
options     FFS            # Berkeley Fast Filesystem
options     SOFTUPDATES        # Enable FFS soft updates support
options     UFS_ACL            # Support for access control lists
options     UFS_DIRHASH        # Improve performance on big directories
options     UFS_GJOURNAL        # Enable gjournal-based UFS journaling
options     MD_ROOT            # MD is a potential root device
options     NFSCLIENT        # Network Filesystem Client
options     NFSSERVER        # Network Filesystem Server
options     NFSLOCKD        # Network Lock Manager
options     NFS_ROOT        # NFS usable as /, requires NFSCLIENT
options     MSDOSFS            # MSDOS Filesystem
options     CD9660            # ISO 9660 Filesystem
options     PROCFS            # Process filesystem (requires PSEUDOFS)
options     PSEUDOFS        # Pseudo-filesystem framework
options     GEOM_PART_GPT        # GUID Partition Tables.
options     GEOM_LABEL        # Provides labelization
options     COMPAT_43TTY        # BSD 4.3 TTY compat [KEEP THIS!]
options     COMPAT_FREEBSD4        # Compatible with FreeBSD4
options     COMPAT_FREEBSD5        # Compatible with FreeBSD5
options     COMPAT_FREEBSD6        # Compatible with FreeBSD6
options     SCSI_DELAY=5000        # Delay (in ms) before probing SCSI
options     KTRACE            # ktrace(1) support
options     STACK            # stack(9) support
options     SYSVSHM            # SYSV-style shared memory
options     SYSVMSG            # SYSV-style message queues
options     SYSVSEM            # SYSV-style semaphores
options     _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options     KBD_INSTALL_CDEV    # install a CDEV entry in /dev
options     ADAPTIVE_GIANT        # Giant mutex is adaptive.
options     STOP_NMI        # Stop CPUS using NMI instead of IPI
options     AUDIT            # Security event auditing
#options     KDTRACE_HOOKS        # Kernel DTrace hooks
#My options config
options PANIC_REBOOT_WAIT_TIME=16
options SC_DISABLE_REBOOT
#Color modification
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK)
options LIBICONV
options LIBMCHAIN
options MSDOSFS_ICONV
#options MSDOSFS_LARGE
options NTFS
options NTFS_ICONV
options UDF
options UDF_ICONV
#options CPU_ENABLE_SSE
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
#options IPFIREWALL_FORWARD_EXTENDED
options IPDIVERT
options IPFIREWALL_NAT
options IPFIREWALL_DEFAULT_TO_ACCEPT
options LIBALIAS
options IPSTEALTH
options DUMMYNET
#options TCP_DROP_SYNFIN

# To make an SMP kernel, the next two lines are needed
options     SMP            # Symmetric MultiProcessor Kernel
device        apic            # I/O APIC
# CPU frequency control
device        cpufreq
# Bus support.
device        eisa
device        pci
# Floppy drives
device        fdc
# ATA and ATAPI devices
device        ata
device        atadisk        # ATA disk drives
device        ataraid        # ATA RAID drives
device        atapicd        # ATAPI CDROM drives
device        atapifd        # ATAPI floppy drives
device        atapist        # ATAPI tape drives
options     ATA_STATIC_ID    # Static device numbering
# SCSI Controllers
#device        ahb        # EISA AHA1742 family
#device        ahc        # AHA2940 and onboard AIC7xxx devices
#options     AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~128k to driver.
#device        ahd        # AHA39320/29320 and onboard AIC79xx devices
#options     AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                    # output.  Adds ~215k to driver.
#device        amd        # AMD 53C974 (Tekram DC-390(T))
#device        hptiop        # Highpoint RocketRaid 3xxx series
#device        isp        # Qlogic family
#device     ispfw        # Firmware for QLogic HBAs- normally a module
#device        mpt        # LSI-Logic MPT-Fusion
#device        ncr        # NCR/Symbios Logic
#device        sym        # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device        trm        # Tekram DC395U/UW/F DC315U adapters
#device        adv        # Advansys SCSI adapters
#device        adw        # Advansys wide SCSI adapters
#device        aha        # Adaptec 154x SCSI adapters
#device        aic        # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device        bt        # Buslogic/Mylex MultiMaster SCSI adapters
#device        ncv        # NCR 53C500
#device        nsp        # Workbit Ninja SCSI-3
#device        stg        # TMC 18C30/18C50
# SCSI peripherals
device        scbus        # SCSI bus (required for SCSI)
#device        ch        # SCSI media changers
#device        da        # Direct Access (disks)
#device        sa        # Sequential Access (tape etc)
#device        cd        # CD
#device        pass        # Passthrough device (direct SCSI access)
#device        ses        # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device        amr        # AMI MegaRAID
#device        arcmsr        # Areca SATA II RAID
#device        asr        # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device        ciss        # Compaq Smart RAID 5*
#device        dpt        # DPT Smartcache III, IV - See NOTES for options
#device        hptmv        # Highpoint RocketRAID 182x
#device        hptrr        # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
#device        iir        # Intel Integrated RAID
#device        ips        # IBM (Adaptec) ServeRAID
#device        mly        # Mylex AcceleRAID/eXtremeRAID
#device        twa        # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device        aac        # Adaptec FSA RAID
#device        aacp        # SCSI passthrough for aac (requires CAM)
#device        ida        # Compaq Smart RAID
#device        mfi        # LSI MegaRAID SAS
#device        mlx        # Mylex DAC960 family
#device        pst        # Promise Supertrak SX6000
#device        twe        # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device        atkbdc        # AT keyboard controller
device        atkbd        # AT keyboard
device        psm        # PS/2 mouse
device        kbdmux        # keyboard multiplexer
device        vga        # VGA video card driver
device        splash        # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device        sc
device        agp        # support several AGP chipsets
# Power management support (see NOTES for more options)
#device        apm
# Add suspend/resume support for the i8254.
device        pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device        cbb        # cardbus (yenta) bridge
#device        pccard        # PC Card (16-bit) bus
#device        cardbus        # CardBus (32-bit) bus
# Serial (COM) ports
device        sio        # 8250, 16[45]50 based serial ports
device        uart        # Generic UART driver
# Parallel port
device        ppc
device        ppbus        # Parallel port bus (required)
device        lpt        # Printer
#device        plip        # TCP/IP over parallel
#device        ppi        # Parallel port interface device
#device        vpo        # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device        puc
# PCI Ethernet NICs.
device        de        # DEC/Intel DC21x4x (``Tulip'')
device        em        # Intel PRO/1000 Gigabit Ethernet Family
device        igb        # Intel PRO/1000 PCIE Server Gigabit Family
device        ixgb        # Intel PRO/10GbE Ethernet Card
device        le        # AMD Am7900 LANCE and Am79C9xx PCnet
device        txp        # 3Com 3cR990 (``Typhoon'')
device        vx        # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device        miibus        # MII bus support
device        age        # Attansic/Atheros L1 Gigabit Ethernet
#device        ale        # Atheros AR8121/AR8113/AR8114 Ethernet
device        bce        # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device        bfe        # Broadcom BCM440x 10/100 Ethernet
device        bge        # Broadcom BCM570xx Gigabit Ethernet
device        dc        # DEC/Intel 21143 and various workalikes
device        et        # Agere ET1310 10/100/Gigabit Ethernet
device        fxp        # Intel EtherExpress PRO/100B (82557, 82558)
device        jme        # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device        lge        # Level 1 LXT1001 gigabit Ethernet
device        msk        # Marvell/SysKonnect Yukon II Gigabit Ethernet
device        nfe        # nVidia nForce MCP on-board Ethernet
device        nge        # NatSemi DP83820 gigabit Ethernet
#device        nve        # nVidia nForce MCP on-board Ethernet Networking
#device        pcn        # AMD Am79C97x PCI 10/100 (precedence over 'le')
device        re        # RealTek 8139C+/8169/8169S/8110S
device        rl        # RealTek 8129/8139
device        sf        # Adaptec AIC-6915 (``Starfire'')
#device        sis        # Silicon Integrated Systems SiS 900/SiS 7016
#device        sk        # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device        ste        # Sundance ST201 (D-Link DFE-550TX)
#device        stge        # Sundance/Tamarack TC9021 gigabit Ethernet
#device        ti        # Alteon Networks Tigon I/II gigabit Ethernet
#device        tl        # Texas Instruments ThunderLAN
#device        tx        # SMC EtherPower II (83c170 ``EPIC'')
#device        vge        # VIA VT612x gigabit Ethernet
#device        vr        # VIA Rhine, Rhine II
#device        wb        # Winbond W89C840F
device        xl        # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.  pccard NICs included.
#device        cs        # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device        ed        # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device        ex        # Intel EtherExpress Pro/10 and Pro/10+
#device        ep        # Etherlink III based cards
#device        fe        # Fujitsu MB8696x based cards
#device        ie        # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device        sn        # SMC's 9000 series of Ethernet chips
#device        xe        # Xircom pccard Ethernet
# Wireless NIC cards
#device        wlan        # 802.11 support
#device        wlan_wep    # 802.11 WEP support
#device        wlan_ccmp    # 802.11 CCMP support
#device        wlan_tkip    # 802.11 TKIP support
#device        wlan_amrr    # AMRR transmit rate control algorithm
#device        wlan_scan_ap    # 802.11 AP mode scanning
#device        wlan_scan_sta    # 802.11 STA mode scanning
#device        an        # Aironet 4500/4800 802.11 wireless NICs.
#device        ath        # Atheros pci/cardbus NIC's
#device        ath_hal        # Atheros HAL (Hardware Access Layer)
#device        ath_rate_sample    # SampleRate tx rate control for ath
#device        awi        # BayStack 660 and others
#device        ral        # Ralink Technology RT2500 wireless NICs.
#device        wi        # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device        wl        # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device        loop        # Network loopback
device        random        # Entropy device
device        ether        # Ethernet support
device        sl        # Kernel SLIP
device        ppp        # Kernel PPP
device        tun        # Packet tunnel.
device        pty        # Pseudo-ttys (telnet etc)
device        md        # Memory "disks"
device        gif        # IPv6 and IPv4 tunneling
#device        faith        # IPv6-to-IPv4 relaying (translation)
device        firmware    # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device        bpf        # Berkeley packet filter
# USB support
device        uhci        # UHCI PCI->USB interface
device        ohci        # OHCI PCI->USB interface
device        ehci        # EHCI PCI->USB interface (USB 2.0)
device        usb        # USB Bus (required)
#device        udbp        # USB Double Bulk Pipe devices
device        ugen        # Generic
device        uhid        # "Human Interface Devices"
device        ukbd        # Keyboard
device        ulpt        # Printer
#device        umass        # Disks/Mass storage - Requires scbus and da
device        ums        # Mouse
#device        ural        # Ralink Technology RT2500USB wireless NICs
#device        rum        # Ralink Technology RT2501USB wireless NICs
#device        urio        # Diamond Rio 500 MP3 player
#device        uscanner    # Scanners
# USB Serial devices
#device        ucom        # Generic com ttys
#device        uark        # Technologies ARK3116 based serial adapters
#device        ubsa        # Belkin F5U103 and compatible serial adapters
#device        ubser        # BWCT console serial adapters
#device        uftdi        # For FTDI usb serial adapters
#device        uipaq        # Some WinCE based devices
#device        uplcom        # Prolific PL-2303 serial adapters
#device        uslcom        # SI Labs CP2101/CP2102 serial adapters
#device        uvisor        # Visor and Palm devices
#device        uvscom        # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device        aue        # ADMtek USB Ethernet
device        axe        # ASIX Electronics USB Ethernet
device        cdce        # Generic USB over Ethernet
#device        cue        # CATC USB Ethernet
#device        kue        # Kawasaki LSI USB Ethernet
device        rue        # RealTek RTL8150 USB Ethernet
# FireWire support
#device        firewire    # FireWire bus code
#device        sbp        # SCSI over FireWire (Requires scbus and da)
#device        fwe        # Ethernet over FireWire (non-standard!)
#device        fwip        # IP over FireWire (RFC 2734,3146)
#device        dcons        # Dumb console driver
#device        dcons_crom    # Configuration ROM for dcons

Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "Kernel panic during file copy..." +/–

Сообщение от mikra on 26-Дек-08, 13:18

А памяти по факту действительно два гига воткнуто? Погоняй ее мемтестом по полной программе.
Ошибка генерится менеджером памяти, так что собака где-то рядом порылась.
Ну и так, до кучи попробуй копировать все в пределах одного харда, потом в пределах другого. Может это кто-то из них глючит. Не нарезана ли на хардах какая экзотическая файловая система? Не занимался ли после установки фри каким-ньть тюнингом системы с установкой "оптимальных" параметров в sysctl?

Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

3. "Kernel panic during file copy..." +/–

Сообщение от mikra on 26-Дек-08, 13:23

А, еще забыл.
Открыта ли консоль в процессе локального копирования? (если консоль локальная, то не запускается ли на ней какой-ньть скринсейвер или powersave режим перед ошибкой). То же для ssh - не рвется ли соединение?

Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

5. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 26-Дек-08, 21:00

Консоль открыта,при копировании через smbd пробовал выходить, не помогло.Скрин не запускается, по ssh консоль просто виснет, даже не успевая выдать сообщения об ошибке.

Ответить | Правка | ^ к родителю #3 | Наверх | Cообщить модератору

4. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 26-Дек-08, 20:56

Да оперы 2 жижика. Пробовал вытягивать по одной планке,менять местами, не помогает. Сейчас гоняю мемтестом, пока везде выдает "Ок". Файловая система везде ufs + на 80-ке свап.
Копирование проводил как в пределах одного харда, так и между. Замечу, что при установке системы с СD на отформатированный винт, подобная ошибка 1 раз тоже дала о себе знать.
sysctl изменял, но ошибка была и до этого. На всякий случай:
net.inet.ip.ttl=128
net.inet.tcp.blackhole=2
net.inet.udp.blackhole=1
kern.ipc.somaxconn=1024
net.link.ether.inet.log_arp_movements=1
net.link.ether.inet.max_age=600
kern_sync_on_panic=1
kern.coredump=0

Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

6. "Kernel panic during file copy..." +/–

Сообщение от mikra on 29-Дек-08, 13:36

Очень хочется предположить аппаратную проблему вроде битой памяти или неисправной материнки... А раньше на этом железе что-то работало?
Что-то где-то я сталкивался с smp... Вот первым делом попробовал бы пересобрать ядро без smp и сопутствующих опций.
А потом, если не поможет, попробовал бы запустить livecd фри, подмонтировать харды, что-ньть скопировать. Можно еще для увелиения объема статистики попробовать запустить livecd линукса какого-ньть. Хотя, если на этапе установки фри ошибка появляется, то думается что и с livecd повторится.
Тогда остается сбросить настройки биоса, может обновить его... Ну и на железки грешить.
Вообще в гугле упоминается такая ошибка, но вопросы довольно давнишние.

Ответить | Правка | ^ к родителю #4 | Наверх | Cообщить модератору

7. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 29-Дек-08, 14:41

К гуглу обращался )))
Жылезки нульцевые. Пока больше всего вызывает подозрение мать, ночь ганял мемтестом память, кроме "Ок" ничего неполучил. Биос перекопал от и до - бесполезно. Попробую еще, как ты говориш, без SMP и чето виндоволинуксообразное запихнуть и попробовать на нем, что бы 100% знать куда булку крошить! )

Ответить | Правка | ^ к родителю #6 | Наверх | Cообщить модератору

8. "Kernel panic during file copy..." +/–

Сообщение от Том Сойер on 29-Дек-08, 15:00

в первую очередь пробуй без SMP

Ответить | Правка | ^ к родителю #7 | Наверх | Cообщить модератору

9. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 04-Фев-09, 01:18

Выяснилось, что проблема чисто фрибиэсдишная, Linux Ubuntu Server и Windows XPю работают на железках нормально. Суть проблемы пока выяснить не удалось ((

Ответить | Правка | ^ к родителю #8 | Наверх | Cообщить модератору

10. "Kernel panic during file copy..." +/–

Сообщение от Lys (ok) on 11-Фев-09, 11:20

Решилось заменой мамки. Как мне обьяснили в сервисе, там чето с биосом не так было!
TOPIC CLOSED

Ответить | Правка | ^ к родителю #9 | Наверх | Cообщить модератору

11. "Kernel panic during file copy..." +/–

Сообщение от VladimirM on 15-Апр-16, 12:57

Проблема на 146% программная. И да - тут во фрибсд именно дело. Не мучайте железо!
> Выяснилось, что проблема чисто фрибиэсдишная, Linux Ubuntu Server и Windows XPю работают
> на железках нормально. Суть проблемы пока выяснить не удалось ((

Ответить | Правка | ^ к родителю #9 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру

1. "Kernel panic during file copy..."	+/–
Сообщение от Lys (ok) on 25-Дек-08, 21:14
Конфигурация ядра # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/ke... # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.474.2.15.2.1 2008/11/25 02:59:29 kensmith Exp $ #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident LSD # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT # Security event auditing #options KDTRACE_HOOKS # Kernel DTrace hooks #My options config options PANIC_REBOOT_WAIT_TIME=16 options SC_DISABLE_REBOOT #Color modification options SC_NORM_ATTR=(FG_GREEN\|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW\|BG_BLACK) options LIBICONV options LIBMCHAIN options MSDOSFS_ICONV #options MSDOSFS_LARGE options NTFS options NTFS_ICONV options UDF options UDF_ICONV #options CPU_ENABLE_SSE options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_FORWARD #options IPFIREWALL_FORWARD_EXTENDED options IPDIVERT options IPFIREWALL_NAT options IPFIREWALL_DEFAULT_TO_ACCEPT options LIBALIAS options IPSTEALTH options DUMMYNET #options TCP_DROP_SYNFIN # To make an SMP kernel, the next two lines are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC # CPU frequency control device cpufreq # Bus support. device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #device ahd # AHA39320/29320 and onboard AIC79xx devices #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. #device amd # AMD 53C974 (Tekram DC-390(T)) #device hptiop # Highpoint RocketRaid 3xxx series #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mfi # LSI MegaRAID SAS #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 Gigabit Ethernet Family device igb # Intel PRO/1000 PCIE Server Gigabit Family device ixgb # Intel PRO/10GbE Ethernet Card device le # AMD Am7900 LANCE and Am79C9xx PCnet device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device age # Attansic/Atheros L1 Gigabit Ethernet #device ale # Atheros AR8121/AR8113/AR8114 Ethernet device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device et # Agere ET1310 10/100/Gigabit Ethernet device fxp # Intel EtherExpress PRO/100B (82557, 82558) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nfe # nVidia nForce MCP on-board Ethernet device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm #device wlan_scan_ap # 802.11 AP mode scanning #device wlan_scan_sta # 802.11 STA mode scanning #device an # Aironet 4500/4800 802.11 wireless NICs. #device ath # Atheros pci/cardbus NIC's #device ath_hal # Atheros HAL (Hardware Access Layer) #device ath_rate_sample # SampleRate tx rate control for ath #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device rum # Ralink Technology RT2501USB wireless NICs #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Serial devices #device ucom # Generic com ttys #device uark # Technologies ARK3116 based serial adapters #device ubsa # Belkin F5U103 and compatible serial adapters #device ubser # BWCT console serial adapters #device uftdi # For FTDI usb serial adapters #device uipaq # Some WinCE based devices #device uplcom # Prolific PL-2303 serial adapters #device uslcom # SI Labs CP2101/CP2102 serial adapters #device uvisor # Visor and Palm devices #device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) #device fwip # IP over FireWire (RFC 2734,3146) #device dcons # Dumb console driver #device dcons_crom # Configuration ROM for dcons
Ответить \| Правка \| ^ к родителю #0 \| Наверх \| Cообщить модератору


	2. "Kernel panic during file copy..."	+/–
	Сообщение от mikra on 26-Дек-08, 13:18
	А памяти по факту действительно два гига воткнуто? Погоняй ее мемтестом по полной программе. Ошибка генерится менеджером памяти, так что собака где-то рядом порылась. Ну и так, до кучи попробуй копировать все в пределах одного харда, потом в пределах другого. Может это кто-то из них глючит. Не нарезана ли на хардах какая экзотическая файловая система? Не занимался ли после установки фри каким-ньть тюнингом системы с установкой "оптимальных" параметров в sysctl?
	Ответить \| Правка \| ^ к родителю #1 \| Наверх \| Cообщить модератору


	3. "Kernel panic during file copy..."	+/–
	Сообщение от mikra on 26-Дек-08, 13:23
	А, еще забыл. Открыта ли консоль в процессе локального копирования? (если консоль локальная, то не запускается ли на ней какой-ньть скринсейвер или powersave режим перед ошибкой). То же для ssh - не рвется ли соединение?
	Ответить \| Правка \| ^ к родителю #2 \| Наверх \| Cообщить модератору


	5. "Kernel panic during file copy..."	+/–
	Сообщение от Lys (ok) on 26-Дек-08, 21:00
	Консоль открыта,при копировании через smbd пробовал выходить, не помогло.Скрин не запускается, по ssh консоль просто виснет, даже не успевая выдать сообщения об ошибке.
	Ответить \| Правка \| ^ к родителю #3 \| Наверх \| Cообщить модератору


	4. "Kernel panic during file copy..."	+/–
	Сообщение от Lys (ok) on 26-Дек-08, 20:56
	Да оперы 2 жижика. Пробовал вытягивать по одной планке,менять местами, не помогает. Сейчас гоняю мемтестом, пока везде выдает "Ок". Файловая система везде ufs + на 80-ке свап. Копирование проводил как в пределах одного харда, так и между. Замечу, что при установке системы с СD на отформатированный винт, подобная ошибка 1 раз тоже дала о себе знать. sysctl изменял, но ошибка была и до этого. На всякий случай: net.inet.ip.ttl=128 net.inet.tcp.blackhole=2 net.inet.udp.blackhole=1 kern.ipc.somaxconn=1024 net.link.ether.inet.log_arp_movements=1 net.link.ether.inet.max_age=600 kern_sync_on_panic=1 kern.coredump=0
	Ответить \| Правка \| ^ к родителю #2 \| Наверх \| Cообщить модератору


	6. "Kernel panic during file copy..."	+/–
	Сообщение от mikra on 29-Дек-08, 13:36
	Очень хочется предположить аппаратную проблему вроде битой памяти или неисправной материнки... А раньше на этом железе что-то работало? Что-то где-то я сталкивался с smp... Вот первым делом попробовал бы пересобрать ядро без smp и сопутствующих опций. А потом, если не поможет, попробовал бы запустить livecd фри, подмонтировать харды, что-ньть скопировать. Можно еще для увелиения объема статистики попробовать запустить livecd линукса какого-ньть. Хотя, если на этапе установки фри ошибка появляется, то думается что и с livecd повторится. Тогда остается сбросить настройки биоса, может обновить его... Ну и на железки грешить. Вообще в гугле упоминается такая ошибка, но вопросы довольно давнишние.
	Ответить \| Правка \| ^ к родителю #4 \| Наверх \| Cообщить модератору


	7. "Kernel panic during file copy..."	+/–
	Сообщение от Lys (ok) on 29-Дек-08, 14:41
	К гуглу обращался ))) Жылезки нульцевые. Пока больше всего вызывает подозрение мать, ночь ганял мемтестом память, кроме "Ок" ничего неполучил. Биос перекопал от и до - бесполезно. Попробую еще, как ты говориш, без SMP и чето виндоволинуксообразное запихнуть и попробовать на нем, что бы 100% знать куда булку крошить! )
	Ответить \| Правка \| ^ к родителю #6 \| Наверх \| Cообщить модератору


	8. "Kernel panic during file copy..."	+/–
	Сообщение от Том Сойер on 29-Дек-08, 15:00
	в первую очередь пробуй без SMP
	Ответить \| Правка \| ^ к родителю #7 \| Наверх \| Cообщить модератору


	9. "Kernel panic during file copy..."	+/–
	Сообщение от Lys (ok) on 04-Фев-09, 01:18
	Выяснилось, что проблема чисто фрибиэсдишная, Linux Ubuntu Server и Windows XPю работают на железках нормально. Суть проблемы пока выяснить не удалось ((
	Ответить \| Правка \| ^ к родителю #8 \| Наверх \| Cообщить модератору


	10. "Kernel panic during file copy..."	+/–
	Сообщение от Lys (ok) on 11-Фев-09, 11:20
	Решилось заменой мамки. Как мне обьяснили в сервисе, там чето с биосом не так было! TOPIC CLOSED
	Ответить \| Правка \| ^ к родителю #9 \| Наверх \| Cообщить модератору


	11. "Kernel panic during file copy..."	+/–
	Сообщение от VladimirM on 15-Апр-16, 12:57
	Проблема на 146% программная. И да - тут во фрибсд именно дело. Не мучайте железо! > Выяснилось, что проблема чисто фрибиэсдишная, Linux Ubuntu Server и Windows XPю работают > на железках нормально. Суть проблемы пока выяснить не удалось ((
	Ответить \| Правка \| ^ к родителю #9 \| Наверх \| Cообщить модератору